3:SPECIAL ITEMS



CHAPTER 3

SPECIAL ITEMS FOR SLUICE STRUCTURES

Sl.

No.

Description of Item

Unit

Rate (`)

Zone I

Zone II

Zone III

Zone IV

 

 

 

Dist.: Jalpaiguri, Coochbehar, Alipurduar, Plains of Siliguri Sub-Division

Dist.: Murshidabad, Malda, Dakshin Dinajpur, Uttar Dinajpur, Nadia

Dist.:

Purba Burdwan, Paschim Burdwan Birbhum, Bankura, Purulia

Dist.: N 24

Parganas, S 24 Parganas, Kolkata, Hooghly, Howrah, Jhargram, Purba & Paschim Medinipur

3.01

Taking out sluice gate draw shutter gearing arrangements & pedestal including refitting the same  with  new  nuts  &  bolts  where necessary.

 

 

 

 

 

(a) Up to 4 sqm.

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

317.00

297.00

317.00

317.00

(ii) Taking out only.

Sqm

170.00

157.00

170.00

170.00

(iii) Only Lowering

Sqm

287.00

267.00

287.00

287.00

 

(b) Above 4 sqm. and upto 7 sqm

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

406.00

386.00

406.00

406.00

(ii) Taking out only.

Sqm

200.00

187.00

200.00

200.00

(iii) Only Lowering

Sqm

347.00

326.00

347.00

347.00

 

(c) Above 7 sqm.

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

580.00

551.00

580.00

580.00

(ii) Taking out only.

Sqm

285.00

266.00

285.00

285.00

(iii) Only Lowering

Sqm

495.00

466.00

495.00

495.00

3.02

Taking out flap shutter of sluice gate including hoisting arrangements and refitting the same with new nuts & bolts where necessary

 

 

 

 

 

(a) Up to 4 sqm.

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

249.00

233.00

249.00

249.00

(ii) Taking out only.

Sqm

112.00

104.00

112.00

112.00

(iii) Only Lowering

Sqm

184.00

172.00

184.00

184.00

(b) Above 4 sqm. and upto 7 sqm.

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

323.00

307.00

323.00

323.00

(ii) Taking out only.

Sqm

136.00

128.00

136.00

136.00

(iii) Only Lowering

Sqm

233.00

221.00

233.00

233.00

 

(c) Above 7 sqm.

 

 

 

 

 

(i) Taking out and refitting the same.

Sqm

430.00

410.00

430.00

430.00

(ii) Taking out only.

Sqm

182.00

171.00

182.00

182.00

(iii) Only Lowering

Sqm

311.00

295.00

311.00

311.00

3.03

Taking out & refitting the Jack & Gear including supply of new nuts & bolts, cleaning & greasing, if necessary and as directed by the Engineer - in -charge.

 

 

 

 

 

(a) Taking out and refitting the same.

Each

270.00

250.00

270.00

270.00

(b) Taking out only.

Each

131.00

119.00

131.00

131.00

3.04

Taking out Pedestal and refitting the same with new nuts & bolts as necessary (nuts & bolts to be supplied by the contractor at his own cost)

 

 

 

 

 

(a) Taking out and refitting the same.

Each

403.00

376.00

403.00

403.00

(b) Taking out only.

Each

161.00

146.00

161.00

161.00

(c) Only refitting

Each

285.00

269.00

285.00

285.00

3.05

Taking out screw gearing by cutting nuts and bolts from draw shutter & refitting with new nuts & bolts to be supplied by the contractor without any extra payment.

 

 

 

 

 

(a) Taking out and refitting the same.

Each

262.00

240.00

262.00

262.00

(b) Taking out only.

Each

175.00

159.00

175.00

175.00

(c) Only refitting

Each

186.00

172.00

186.00

186.00

3.06

Lifting draw shutters for feeding or drainage operation, as per direction of the Engineer-in-charge.

 

Each

 

34.00

 

31.00

 

34.00

 

34.00

3.07

Lowering draw shutters after feeding or drainage operation, as per direction of the Engineer-in-charge.

 

Each

 

34.00

 

31.00

 

34.00

 

34.00

3.08

Lifting flap shutter on channel for feeding including tying with suitable galvanized wire to iron bracket to guard against falling down, as per direction of the Engineer-in-charge.

 

Each

 

185.00

 

171.00

 

185.00

 

185.00

3.09

Lowering flap shutter from channel after feeding operation, as per direction of the Engineer-in-charge.

 

Each

 

109.00

 

99.00

 

109.00

 

109.00

3.10

Supplying, fitting and fixing of Mild Steel Guide Channel with necessary Mild Steel lugs of required length and size by making hole into wall and fixing with necessary masonry work with maintaining proper line and level as directed by the Engineer-in- charge. This item includes two coats of anti-corrossive bituminous paint over two coats of red lead primer. Payment will be made on actual length of Guide Channel.

 

 

 

Kg

 

 

 

78.00

 

 

 

77.00

 

 

 

77.00

 

 

 

77.00

3.11

Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel  plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer- in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site.

 

 

 

 

 

Kg

 

 

 

 

85.00

 

 

 

 

85.00

 

 

 

 

84.00

 

 

 

 

84.00

3.12

Supplying only at site Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for any sluice including cutting, drilling, forging and welding of the Mild steel and fabricating the same (as per drawing and direction of the Engineer-in-charge), painting with two coats of anticorrosive bituminous paint of approved make & brand over a coat of red lead primer etc. complete.

 

 

 

 

Kg

 

 

 

76.00

 

 

 

76.00

 

 

 

75.00

 

 

 

75.00

3.13

Supplying, fitting, fixing Mild Steel flap shutter  with  Mild Steel  plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer- in-charge) including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site.

 

 

 

 

Kg

 

 

 

86.00

 

 

 

85.00

 

 

 

84.00

 

 

 

84.00

3.14

Supplying only at site Mild Steel flap shutter with Mild Steel plate of thickness as specified by the Engineer-in-Charge and other necessary Mild Steel sections for any sluice including cutting, drilling, forging and welding of the Mild Steel and fabricating the same (as per drawing and direction of the Engineer-in-charge), painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer etc. complete.

 

 

 

 

Kg

 

 

 

77.00

 

 

 

77.00

 

 

 

76.00

 

 

 

76.00

3.15

Supplying / Replacing Gun Metal Bush for screw gearing arrangement required for hanging arrangement of  draw  shutter and fitting & fixing with the screw gearing arrangement for  operating the draw shutter by taking out the old screw gearing arrangement and Gun Metal bush etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.)

 

 

 

 

 

(a) 50 mm. dia

Each

7103.00

6736.00

6619.00

6377.00

(b) 65 mm. dia.

Each

7431.00

7052.00

6919.00

6663.00

(c) 75 mm. dia.

Each

7774.00

7380.00

7233.00

6962.00

(d) 80 mm. dia.

Each

7939.00

7538.00

7384.00

7107.00

(e) 100 mm. dia.

Each

9413.00

8951.00

8736.00

8397.00

3.16

Supplying / Replacing at site alloy steel bush for gearing arrangement of Mild Steel regulator shutter including fitting & fixing the same in Cast Iron wheel with bearing and necessary lubricant including cutting internal thread in the bush as necessary including cost of all materials, tools, labours and carriage to site complete of specified diameter as per direction of the Engineer - in - charge.

 

 

 

 

 

(a) 50 mm. dia

 

Each

 

1070.00

 

990.00

 

1034.00

 

1016.00

(b) 65 mm. dia

Each

1141.00

1059.00

1099.00

1079.00

(c) 75 mm. dia

Each

1284.00

1195.00

1230.00

1203.00

(d) 80 mm. dia

Each

1355.00

1263.00

1296.00

1266.00

(e) 100 mm. dia

Each

1711.00

1605.00

1622.00

1578.00

3.17

Supplying, fitting & fixing Cast Iron wheel  (after  taking  out  existing one if necessary), rim made of 28 mm. to 36 mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc. complete as per direction of the Engineer-in-charge.

 

 

 

 

 

(a) 45 cm dia. Cast Iron wheel.

Per Set

2378.00

2267.00

2199.00

2110.00

(b) 60 cm. dia. Cast Iron wheel

Per Set

3105.00

2965.00

2867.00

2749.00

3.18

Supplying, fitting and fixing top runner fabricated by ISMB / ISMC of required size, 2 nos. for each gate of required length and fitting, fixing with required nos. of anchors / lugs by Mild Steel flat bar of required size bifurcated at one end and  welded with  the  other  end with top runner and providing with required drilled holes of required dia. for base plate and all other components as required including carriage of all materials to site complete  including painting with two coats of anticorrosive bituminous paint of approved make and brand over two coats of red lead primer etc. all complete as per direction of the Engineer-in-charge.

 

 

 

 

 

Kg

 

 

 

 

70.00

 

 

 

 

69.00

 

 

 

 

68.00

 

 

 

 

69.00

3.19

Taking out runner of any  section  including  cutting  bolts  and  nuts, dismantling existing concrete or brick  work  where  necessary.

 

Metre

 

44.00

 

40.00

 

44.00

 

44.00

3.20

Replacing skin plate, channels, angles etc. only of draw/ flap shutter including cutting the old skin  plate,  channels, angles etc. as necessary in required shape and replacing the old one by new plate, channels, angles etc. including  run  welding  and  tag welding where necessary including removing rust from existing frame by chipping, emery clothing the surface and painting with  two coats of red lead primer as per direction of the Engineer-in- charge complete.

 

 

 

 

Kg

 

 

 

88.00

 

 

 

88.00

 

 

 

87.00

 

 

 

87.00

3.21

Supplying / Replacing including fitting & fixing at site new Cast Iron guide channel true to the line & level for draw shutters of sluices as per drawing  &  direction  of  the  Engineer-in-charge  with Cast  Iron hold fast not more than 1 Metre apart including two coats of anti-corrossive bituminous paint of approved make and brand over two coats of red lead primer. (Rate is inclusive of taking out of old guide channels, if required)

 

 

 

Kg

 

 

 

81.00

 

 

 

78.00

 

 

 

76.00

 

 

 

73.00

3.22

Supplying, fitting and fixing at site Cast Iron flap shutter for hume pipe sluice with Cast Iron collar and other fittings etc. complete (as per drawing & direction of Engineer-in-charge) including casting  the same, necessary drilling & painting with two coats of anticorrosive bituminous  paint  of  approved  make  and  brand over two coats of red lead primer with carriage to site complete. (This Rate is inclusive of taking out of old ones)

 

 

 

Kg

 

 

 

98.00

 

 

 

94.00

 

 

 

93.00

 

 

 

90.00

3.23

Supplying, fitting & fixing of Cast Iron collar with links and necessary Mild Steel bolts for H.P. sluice of dia. between 90 cm. & 120 cm. as per drawing and direction of the Engineer-in-charge including carriage to site complete. (This rate is inclusive of taking out of old ones)

 

 

Kg

 

 

94.00

 

 

89.00

 

 

88.00

 

 

86.00

3.24

Supplying / Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting, fixing in  position  with  screw gearing arrangement for operating the  draw  shutter including taking out old gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.)

 

 

 

 

 

(a) 50 mm. dia.

Metre

1537.00

1516.00

1517.00

1517.00

(b) 65 mm. dia.

Metre

2318.00

2290.00

2285.00

2285.00

(c) 75 mm. dia.

Metre

2995.00

2960.00

2951.00

2951.00

(d) 80 mm. dia.

Metre

3261.00

3226.00

3212.00

3212.00

(e) 100 mm. dia.

Metre

4882.00

4832.00

4804.00

4804.00

3.25

Sand blasting to  Mild  Steel  surface  with coarse  sand  followed by immediate application of two coats of Zinc Rich Epoxy Primer of approved  make  and  brand  and  subsequent painting two           coats with Coal Tar  Epoxy  of  approved  make  and  brand including  cost       of           materials,            labours, machinery, fuel and power including carriage of the steel  materials  at  site complete. [Brand of primer and paint shall be approved by the Engineer-in-charge.] Note : This item is to be used for shutter of drainage  sluices directly in contact with tidal saline water or industrial and toxic effluents.

 

 

 

 

 

Sqm

 

 

 

 

 

1056.00

 

 

 

 

 

1042.00

 

 

 

 

 

1047.00

 

 

 

 

 

1099.00

3.26

Supplying, fitting & fixing in  position  rubber  seal arrangements with musical note harmonic 'J' type for making water tight in both up and down stream of draw shutter as well as flap shutter including guide paths, additional M. S. flats, bolts and nuts for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in- charge.

 

 

 

 

 

(a)Flat Type Rubber Seal

 

 

 

 

 

(i) 59 mm x 6 mm

Metre

598.00

582.00

595.00

595.00

(ii) 127 mm x 6 mm

Metre

742.00

726.00

736.00

736.00

(iii) 150 mm x 12 mm

Metre

792.00

776.00

786.00

786.00

(iv) 90 mm x 20 mm

Metre

792.00

776.00

786.00

786.00

 

(b) Musical Note, Harmonic Type

 

 

 

 

 

(i) 59 mm x 6 mm

Metre

816.00

800.00

813.00

813.00

(ii) 127 mm x 6 mm

Metre

1166.00

1150.00

1160.00

1160.00

(iii) 70 mm x 12 mm

Metre

985.00

969.00

981.00

981.00

3.27

Oiling, cleaning & greasing the regulator gate & gate parts  including guide channel, top runner, pedestal block, gear rods, wheel, fish plate etc. with sufficient lubricant as and when necessary as directed by  the Engineer-in-charge  including  cost  of all materials to site complete.

 

 

Each Set

 

 

359.00

 

 

351.00

 

 

359.00

 

 

359.00

3.28

Supplying / Replacing at site new pedestal or other similar items for sluices made with Mild Steel plates, angles, channels, holding down nuts & bolts etc. including fitting, fixing in position in concrete or masonry complete as per direction of the Engineer - in -charge.

 

 

Kg

 

 

79.00

 

 

79.00

 

 

78.00

 

 

78.00

3.29

Supplying fitting & fixing Cast Iron base plate of required size with necessary drilled holes of required dia. and number for fixing with the top runner and one number hole at the center of required dia. for screw rod duly threaded with necessary grooving for easy roller grip arrangement by 13 mm dia. high carbon steel balls in both Gun Metal or other bushes & base plate etc & providing with required bolts and nuts (Mild Steel) 16 mm dia & 100 mm long and one suitable screw as key, complete including painting with two coats of red lead primer.

 

 

 

 

Kg

 

 

 

 

96.00

 

 

 

 

93.00

 

 

 

 

91.00

 

 

 

 

88.00

3.30

Supplying fitting & fixing Mild Steel base plate of required size with necessary drilled holes of required dia. and number for fixing with the top runner and one number hole at the center of required dia. for screw rod duly threaded with necessary grooving for easy roller grip arrangement by 13 mm dia. high carbon steel balls in both Gun Metal or other bushes & base plate etc & providing with required bolts and nuts (Mild Steel) 16 mm dia & 100 mm long and one suitable screw as key, complete including painting with two coat of red lead Primer.

 

 

 

 

Kg

 

 

 

 

93.00

 

 

 

 

93.00

 

 

 

 

92.00

 

 

 

 

92.00

3.31

Supplying, fitting & fixing in position rubber seal arrangement for making water tight including M. S. flats, bolts and nuts and making holes in the shutter leaf for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in-charge.

 

 

 

 

 

(i)Double bulb rubber seal(Bottom seal) 150 mm X 44 mm

Metre

3099.00

3083.00

3096.00

3096.00

(ii)"L"type 88mmX14mm type -II vertical side seal

Metre

1502.00

1486.00

1499.00

1499.00

(iii)Rubber pad 90 mmX40mm

Metre

1502.00

1486.00

1499.00

1499.00

(iv)"L" type rubber seal 135mmX100X 30mm/20mm top seal

Metre

3099.00

3083.00

3096.00

3096.00

 

NOTE:

? The above rates are exclusive of G.S.T and Labour Welfare Cess.

? Construction Wing should add G.S.T., as applicable, as per Goods and Service Tax Act, 2017 to derive the cost.

? Construction Wing should add Labour Welfare Cess ( in terms of Clause 3 of Construction Labour Welfare Cess Rules, 1998) @ 1% to derive the final cost.

****