Additional New Items



Sr. No. Chapter SSR Item No. Reference No. Description of the item Additional Specification Unit Completed Rate
excluding GST In Rs.
Labour Rate
excluding GST In Rs.
  SSR 2018-19 Additional New  Items 
1689 Waterproofing Treatment 50.01   Waterproofing  Treatment   to   existing  Terrace   by  using  Polymeric cementitious membrane of approved make & approved by Engineer in charge by replacing the existing waterproofing treatment. Break open the existing I.P.S. and brick bat coba of the terrace slab to expose the bare  slab.  (If  there  are  cracks  on  the  bare  slab  open  the  crack  in  V Groove and fill it with P.M.M. and if there are lots of honeycombs and identified  bad  patches  of  concrete  the  same  should  be  grouted  by grouting  procedures).  Clean  the  entire  surface  thoroughly   and  over this   prepared surface, apply   three coats of polymeric  waterproofing coating   having   a   breathable   non   toxic   acrylic   polymer   liquid   of approved   make   &   approved   by   Engineer   in   charge,   over   this waterproofing   treatment,  provide  and  lay  brick  bat  coba  of  average 112 mm thickness. As directed by Engineer in charge Square metre 1981 1018
1690 Waterproofing Treatment 50.02   Waterproofing Treatment to existing Toilet and bathrooms by using Polymeric cementitious membrane of approved make & approved by Engineer    in    charge    and    replacing    the    existing    waterproofing treatment.  Break  open  the  existing  I.P.S.  and  brick  bat  coba  of  the toilet and bathroom areas to expose the bare slab. (If there are cracks on the bare slab open the crack in V Groove and fill it with P.M.M. and if there are lots of honeycombs and identified bad patches of concrete the same should be grouted by grouting procedures). Clean the entire surface thoroughly  and over this  prepared surface, apply  three coats of polymeric waterproofing   coating  having   a   breathable non toxic acrylic polymer   liquid  of approved make & approved by Engineer in charge over  this waterproofing  treatment, provide and lay brick bat coba of average 112 mm thickness. As directed by Engineer in charge Square metre 1981 1018
1691 Waterproofing Treatment 50.03   Clean  the  deck  surface  of  the  bridge  of  all  loose  particles,  dust, cement  laitance  etc.  preferably  done  by  using  machine  like  device. Inspect for cracks/construction joints. Fill the cracks by Flexiroof PU of approved make &  approved by Engineer in charge (This  coating is  to be protected by providing IPS on top of it). Provide and apply a primer coat   of    Flexiroof   PU   Primer   of   approved   make   &   approved   by Engineer in charge on the cleaned RCC deck surface using a soft paint brush.  Shake  the  container  well  and  directly  apply  the  primer  by brush. Allow it to set for 30 - 45 mins.Provide and apply Flexiro of PU of approved make & approved by Engineer in charge by brush, roller or  airless  spray  equipment.  Apply  at  a  rate  of  1  kg/sqm  for  the  first coat  evenly  over  the  primer  surface  and  allow  to  set  for  12  hours. After  ensuring  that  the  first  coat  is  set  and  cured,  apply  the  second coat in similar manner at a rate of 0.5 kg/sqm and allow to set. While the second coat is has reasonably hardened but still wet and tacky on surface,  sprinkle  sand  over  the  surface  to  make  it  rough  so  as  to provide mechanical key for the protective screed/I.P.S. Ensure that the sand does not gets embedded in the second coat and remains on the surface.  Allow  the  two  coats  of  Flexiroof  PU  of  approved  make  & approved  by  Engineer  in  charge  to  air  cure  for  4-5  days  before proceeding  with  the  protective  screed.  This  should  be  followed  by application of compatible I.P.S. of 25 MM thick waterproof bedding of I.P.S.
The liquid membrane should have a track record of atleast 4 years in India & Gulf region and have atleast an 4 year track record in PWD. Single  Component,  Liquid  Applied,  Polyurethane  Membrane  should have following minimum properties:
1.  Water  permeability  (DIN  1048):  Nil  as  per  DIN  1048  @  7  bar  of hydrostatic pressure.
2. Moisture permeability: < 0.4 g/m2/day
3.   Accelerated  Weathering  (IS  101):  2000  hrs  No  cracking  or  blister formation.
4. Adhesion to concrete (ASTM D 1000): >21 Kg/cm2 (Concrete Fails)
5. Tensile Strength: > 2.0 MPa (ASTM D412)
6. Should not be water soluble or water dilutable
7. Shore A Hardness:  40 ± 5 (ASTM D2240)
8. Elongation at Break: > 900 % (ASTM D412)
9. Solids: > 95 %
10. No micro-bubble formation or blistering should take place during the curing of thick films.
It shall be applied as per manufacturers specification.
As directed by Engineer in charge Square metre 2134 450
1692 Waterproofing Treatment 50.04   Clean the R.C.C. roof slab surface of all loose particles, dust, cement laitance etc. preferably done by using machine like device. Inspect for cracks/construction joints. Fill the cracks by Flexiroof PU of approved make   &   approved   by   Engineer   in   charge   (This   coating   is   to   be protected by providing I.P.S. on top of it). Provide and apply a primer coat of Flexiroof PU Primer of approved make & approved by Engineer in  charge  on  the  cleaned  RCC  deck  surface  using  a  soft  paint  brush. Shake the container well and directly apply the primer by brush. Allow it to set for 30 - 45 mins. Provide and apply Flexiroof PU of approved make  &   approved  by  Engineer  in  charge  by  brush,  roller  or  airless spray equipment. Apply at a rate of 1 kg/sqm for the first coat evenly over the primer surface and allow to set for 12 hours. After ensuring that  the  first  coat  is  set  and  cured,  apply  the  second  coat  in  similar manner  at  a  rate  of  0.5  kg/sqm  and  allow  to  set.  While  the  second coat  is  has  reasonably  hardened  but  still  wet  and  tacky  on  surface, sprinkle  sand  over  the  surface  to  make  it  rough  so  as  to  provide mechanical  key  for  the  protective  screed/IPS.  Ensure  that  the  sand does  not  gets  embedded  in  the  second  coat  and  remains  on  the surface.  Allow  the  two  coats  of  Flexiroof  PU  of  approved  make  & approved  by  Engineer  in  charge  to  air  cure  for  4-5  days  before proceeding  with  the  protective  screed.  This  should  be  followed  by application of compatible IPS of 25 MM thick waterproof bedding. As directed by Engineer in charge Square Metre 2135 450
        The liquid membrane should have a track record of atleast 4 years in India & Gulf region and have atleast an 4 year track record in PWD. Single  Component,  Liquid  Applied,  Polyurethane  Membrane  should have following minimum properties:
1.  Water  permeability  (DIN  1048):  Nil  as  per  DIN  1048  @  7  bar  of hydrostatic pressure.
2. Moisture permeability: < 0.4 g/m2/day
3.   Accelerated  Weathering  (IS  101):  2000  hrs  No  cracking  or  blister formation.
4. Adhesion to concrete (ASTM D 1000): >21 Kg/cm2 (Concrete Fails)
5. Tensile Strength: > 2.0 MPa (ASTM D412)
6. Should not be water soluble or water dilutable
7. Shore A Hardness:  40 ± 5 (ASTM D2240)
8. Elongation at Break: > 900 % (ASTM D412)
9. Solids: > 95 %
10. No micro-bubble formation or blistering should take place during the curing of thick films.
It shall be applied as per manufacturers specification.
       
1693 Waterproofing Treatment 50.05   Clean  the  RCC  roof  slab  surface  of  all  loose  particles,  dust,  cement laitance  etc.  preferably  done  using  machine  like  device.  Inspect  for cracks   /construction   joints.   Fill   the   cracks   by   Elastoroof   PU   of approved make &  approved by Engineer in charge. Provide and apply a  primer  coat  of  Sunprime  PU  primer  of  sunanda  or  equivalent  or approved by Engineer in charge on the cleaned RCC slab surface using a  soft  paint  brush.  Shake  the  container  well  and  directly  apply  the primer  by  brush.  Allow  to  set  for  30  -  45  mins  depending  on  the ambient  temperature.  After  the  primer  has  totally  cured  and  dried, apply  Elastoroof  PU  of  approved  make  &   approved  by  Engineer  in charge by brush, roller or airless spray equipment. Apply at a rate of 1 kg/sqm for the first coat evenly over the primer surface and allow to set  for  12  hours.  After  ensuring  that  the  first  coat  is  set  and  cured, apply  the second coat in similar manner at a  rate of 0.5 kg/sqm and allow  to  set.  While  the  second  coat  is  has  reasonably  hardened  but still wet and tacky on surface, sprinkle sand over the surface to make it   rough   so   as   to   provide   mechanical   key   for   the   protective screed/I.P.S. of 25 MM thick waterproof bedding. Ensure that the sand does  not  gets  embedded  in  the  second  coat  and  remains  on  the surface.  Allow  the  two  coats  of  Elastoroof  PU  of  approved  make  & approved  by  Engineer  in  charge  to  air  cure  for  4-5  days  before proceeding with the protective screed. As directed by Engineer in charge Square Metre 1440 450
  Single  Component,  Liquid  Applied,  Polyurethane  Membrane  should have following minimum properties:
1. Specific gravity: 1.30 ± 0.1
2. Elongation %: >600
3. Tack free time: 24-48 hrs
4. Tensile strength N/mm2: 2.1
5. Shore hardness: 40 ± 5
It shall be applied as per manufacturers specification.
1694 Protective coating and DPR 50.06   Providing  and  applying  two  coats  of  protective  membrane  over  the cured  concrete  surface  like  R.C.C.  footings,  columns,  plinth  beams etc.  which  will  be  submerged  under  soil  so  as  to  protect  the  same. Apply   two   pack   coal   tar   epoxy   system   of   Sunepoxy   Coaltar   of approved  make  &   approved  by  Engineer  in  charge,  having  solid content ranges from 80-100%, Tack free time 4-6 hrs. Recoat after 16- 24 hrs.  Mix Part A and Part B of Sunepoxy Coaltar  of approved make & approved by Engineer in charge in 1:1 ratio with slow speed stirrer and apply the same on a clean R.C.C. surface by brush. Allow to set for 8-10   hours   and   apply   the   second  coat.   The  rate   to   include   for application at all levels to various RCC elements to the satisfaction of the EIC etc. complete. As directed by Engineer in charge Square Metre 247 120
1695 Corrosion Inhibiting Admixture 50.07   Providing  &  Supplying  corrosion  inhibiting  admixture  in concrete  to protect  steel  bars  for  all  concrete  in  every  part  Polyalk  CP  293   of approved  make  &   approved  by  Engineer  in  charge  migrating,  non- nitrite based corrosion inhibiting admixture shall  be added at a  dose of  3  kgs  per  cum  of  concrete.  The  admixture  should  protect  both cathodic  and anodic  sites  and have  been accredited  by Indian  Roads Congress,  recommended  for  use  by  Ministry  of  Road  Transport  & Highways and should have a 4 year track record of use in both the Gulf Region  and  India.  Admixture  should  have  evaluated  test   reports demonstrating a corrosion rate of zero coulombs after 9 test cycles as per   ASTM   G   109   when   tested   from   a   research   institution   NBA accredited Grade A and internationally  ranked among top 5 research institutions  in  the  world  in  Annual  Survey  conducted  by  Georgia Institute   of   Technology   ranking   of   research   institutions.   PH   of admixture should be alkaline in nature, specific  gravity of 0.99 – 1.1, colour  :  brownish.  The  contractor  must  intimate  the  engineer  in charge prior to addition in concrete for recording. If the admixture is put in the concrete mix at the batching plant, a written record of the amount  of  admixture  used  shall  be  supplied  to  the  engineer.  The engineer must ensure that the specified dosage of admixture is added in the concrete mix. (Material Cost Analysis only) As directed by Engineer in charge Kilogram 210 ---
1696 Waterproofing admixture 50.08   Providing   and   mixing   shrinkage   compensating   admixture   cum plasticizer – Sunplex 330 gms pouch  of approved make &   approved by Engineer in charge, adding per 50 Kg bag of cement in sand faced cement plaster to internal/external surfaces in finished in proper line and level. Add Sunplex in dry machine mix before addition of gauging water. (Material Cost Analysis only) As directed by Engineer in charge Pouch 42 ---
1697 Bonding agent 50.09   Providing  and  applying  one  pack  bonding  coat  between  concrete members  like  RCC  slabs,  columns,  beams,  chajjas,  pardis  etc  and cement  mortar  plaster  using  Hack  Aid  Plast   of  approved  make  & approved   by   Engineer   in   charge.   Clean   the   concrete   surface thoroughly  to  remove  dust,  dirt,  grime,  deshuttering  oils  and  rub down to  a  clean surface. Apply  Hack Aid  Plast   of  approved make  & approved  by  Engineer  in  charge  by  spray  on  the  entire  concrete surface. Provide a lean cement - sand dash coat over the same. Allow the  dash  coat  to  set  for  around  24  hours.  Further  plastering  as  per specifications can continue. As directed by Engineer in charge Square metre 54 33
1698 Water proofing 50.10   Clean the surface to remove dirt, loose particles. Examine the surface closely for any cracks. Clean the cracks. Provide and fill a pure acrylic, polymer modified ready to use paste Polyfill AR  of approved make & approved  by  Engineer  in  charge  having  a  cream  coloured  viscous emulsion  ready  to  use  acrylic  polymeric  non-shrink  crackfiller  putty with  auto  suction  properties  and  requiring  no  bonding  agent,  no curing  and  no  requirement  for  opening  the  existing  cracks  finishing with subsequent filling as  required. Provide and apply  three coats  of 100%   acrylic   waterproof   heat   insulating   breathable   decorative external coating Sunext 8  of approved make &  approved by Engineer in charge, in the desired shade. Stir well and apply by brush for three coats. Applying three coats at an interval  of 4-6  hours between each coat.
High    Performance    100%    Acrylic,    Waterproof,    Anti-fungal,    Anti- carbonation,  Heat  Insulating  External  Paint  should  have  following minimum properties:
1. Specific Gravity: 1.3 ± 0.1 at 25°C 2. pH: 7.0 to 10.00
3. Viscosity: 18 to 30 sec. at 25°C by Ford Cup No. B-4 (Dilute 2 parts of product with 1 part of water)
4.  CO2  diffusion  resistance  co-  efficient  (DIN  EN  1062-6  (2002-10):
7.59 x105
5.  CO2  diffusion  equivalent  air  layer  thickness  (DIN  EN  1062-6 (2002- 10): 127m @ 190 microns DFT
6. Adhesion (ASTM D 4541): 2.3 N/mm2 (Concrete / Substrate Failure)
7. Solar Reflectance Index (ASTM E 1980 11,EN 673:2011, EN
As directed by Engineer in charge Square metre 251 163
  Door and Windows 50.11 BD-T Providing  and  fixing  factory  made  door/Window  frames  of  required colour  made  with  wood  Polymer  composite  (WPC)  extuded  internal ribbed   sections   conforming   to   American   Society   for   testing   and materials  (ASTM)  in  regard  with  density,  tensile  strength,  flexural strength,   Izod   impact,   water   absorption   and   screw   withdrawal strength with wall thickness of 5mm (+/1mm) and with frames having mitred joints at each corner, joined together by two nos. of 10 x 8 mm &  40  mm  long PVC  dovetail  keys  including hard  wood piece  support along the full vertical and horizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to Walls/columns with 15 mm long dash fasteners/holdfasts (dash fasteners/holdfasts to  be paid  separately)  etc.  complete  as  per  the  direction  of  Engineer  in charge,with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1699 a 1.1. For Profile size of 75 x 50 mm with 32 x 12 mm rebate   RMT 435.00 74.00
1700 b 1.2  For Profile size of 100 x 50 mm with 32 x 12 mm rebate   RMT 535.00 90.00
1701 c 1.3 For Profile size of 125 x 50 mm with 38 x 12 mm rebate   RMT 635.00 108.00
1702 d 1.4   For Profile size of 120 x  50 mm with 32 x 12 mm double rebate
(Window Section)
  RMT 650.00 110.00
1703 Paving , Florring and dado 50.12 BD-M Supply & Fixing of  Rectified Porcelain Stoneware Tiles for Ventilated Facades  of Specified size as  per specification/  site drawings having 6 mm  and  9  mm  thickness  with  factory  made  Kerfs  (grooves)  as  per need   and   size   600/1200   and   800/1600.   The    Rectified   Porcelain Stoneware  Tiles  shall  possess  properties  having  Water  absorption  < 0.5%  Bending  Strength  >  40  N/mm2  and  are  resistant  to  :  UV  Light, chemicals, smog, thermal shocks & bacteria. The facade will be made from  Nexion  Rectified  Porcelain  Stoneware  Tiles  (Sintered  Compact Surfaces) specified as per ISO 13006 : Annex G- EN 14411 : Annex G : Dry Pressed Ceramic Tiles and all the tests carried out by Italian labs accredited according to ISO/ IEC 17025 : 2005. The Terramilano Fixing sub  structure  will  confirm  to  Norme  Tec  niche  per  le  Costruzioni NTC/8    (Technical    Standard    for    construction)    guidelines    for construction in Italy, Eurocode 0 " Information on the method of semi- probabilistic   limit   states   and   safety   factor   "   Euro   coad   1   " Determination  and  calculation  of  actions  on  structure  "  Euro  9  " Project   aluminum   structures   "   UNI   11018   and   ETAG   034   The Substructure   will   consists   of   Upright   extruded   aluminum   profile TruSt80, alloy 6060 T5 thickness equal to 1.5 to 2 mm and dimension 80  x  110  mm,  inter  axis  80  cm  of  Length 3660  mm, 8085  Aluminum box Section of 1 x 3 inch,1x2inch and 1x 5 inch of length 3660 mm and thickness 1.5 to 2 mm as per need. Brackets St80 galvanized steel and aluminum of 80 mm x 60 mm, aluminum L bracket size 1.5 x 1.5 inch and 1 x 2.5 inch thickness 3 mm that allow to anchor the vertical stand to  the Building, 9 mm/6mm S10  Hooks Harmonic  Stainless Steel  AISI 304 which supports the weight of the Tiles; Bossong/Hilti Mechanical Fasteners and  Nylon Anchor Fastner; and Structural Sealant of 3M for As directed by Engineer-in-charge SQM 8693.50 1478.00
1704 Paving , Florring and dado 50.13 BD-M Supply  &  Fixing  of   Rock  /  Stone  Finished  outdoor  vitrified  flooring Tiles 20 mm thick and required width wide in plain pattern including Cement  float,  filling  joints,  with  neat  cement  slurry,  Natural  sand, curing   and   cleaning   complete.   with   prior   approval   of   concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2850.00 485.00
1705 Paving , Florring and dado 50.14 BD-M Supply  &  Fixing  of   Rock  /  Stone  Finished  outdoor  vitrified  flooring Tiles 16 mm thick and required width wide in plain pattern including Cement  float,  filling  joints,  with  neat  cement  slurry,  Natural  sand, curing   and   cleaning   complete.   with   prior   approval   of   concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2650.00 450.00
1706 Paving , Florring and dado 50.15 BD-M Supply  &  Fixing  of   Rock  /  Stone  Finished  outdoor  vitrified  flooring Tiles 16 mm thick and required width wide in plain pattern including Cement  float,  filling  joints,  with  neat  cement  slurry,  Natural  sand, curing   and   cleaning   complete   with   prior   approval   of   concerned Superitending Engineer.
.
As directed by Engineer-in-charge SQM 2550.00 433.00
1707 Paving , Florring and dado 50.16 BD-M Supply & Fixing of  Full  Body Vitrifid Steptiles Ready  to install  Treads and  Risers  16  mm  thick,  required  width  and  required  finish  in  plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2850.00 485.00
1708 Paving , Florring and dado 50.17 BD-M Supply & Fixing of  Full  Body Vitrifid Steptiles Ready  to install  Treads and  Risers  12  mm  thick,  required  width  and  required  finish  in  plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. As directed by Engineer-in-charge SQM 2450.00 416.00
1709 Paving , Florring and dado 50.18 BD-M Supply  &  Fixing  of  Rock/  Stone  Finished  Full  Body  Vitrifid  Steptiles with thick Bullnose for Ready to install Treads and Risers,  16 mm thick and of required width   in plain pattern including Cement float,  filling joints,  with  neat  cement  slurry,  Natural  sand,  curing  and  cleaning complete. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge SQM 3150.00 535.00
1710 Paving , Florring and dado 50.19 BD-M Supply  &  Fixing  of  Rock/  Stone  Finished  Full  Body    Steptiles  Stone Vitrifid Tiles with thick Bullnose for Ready to install Steps and Risers 12  mm  thick  and  required  width  wide  in  plain  pattern  including Cement  float,  filling  joints,  with  neat  cement  slurry,  Natural  sand, curing   and   cleaning   complete.   with   prior   approval   of   concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2650.00 450.00
1711 Oil Painting 50.20 IS 12594-1988 Providing   hot   dip   galvanizing   conforming   to   IS   12594-1988   to reinforcement bars, having mass of zinc coating shall not be less than 610   grm/sqm   of   bar   surface   area   factory   control   process   with Degreasing, Rinsing, Acid Pickling, Again Rinsing after picking, Fluxing, Hot  Dip  Galvanizing  in  molten  Zinc  bath  Having  Zinc  purity  of  bath minimum 98.5% Quenching & Passivation Process.
32 mm to 40 mm dia. with prior approval of concerned Superitending Engineer.
As directed by Engineer-in-charge M.T. 15513.00 2637.00
1712 Oil Painting 50.21 IS 12594-1988 Providing   hot   dip   galvanizing   conforming   to   IS   12594-1988   to reinforcement bars, having mass of zinc coating shall not be less than 610   grm/sqm   of   bar   surface   area   factory   control   process   with Degreasing, Rinsing, Acid Pickling, Again Rinsing after picking, Fluxing, Hot  Dip  Galvanizing  in  molten  Zinc  bath  Having  Zinc  purity  of  bath minimum 98.5% Quenching & Passivation Process.
16  to  25  mm  dia  with  prior  approval  of  concerned  Superitending Engineer.
As directed by Engineer-in-charge M.T. 16296.00 2770.00
1713 Oil Painting 50.22 IS 12594-1988 Providing   hot   dip   galvanizing   conforming   to   IS   12594-1988   to reinforcement bars, having mass of zinc coating shall not be less than 610   grm/sqm   of   bar   surface   area   factory   control   process   with Degreasing, Rinsing, Acid Pickling, Again Rinsing after picking, Fluxing, Hot  Dip  Galvanizing  in  molten  Zinc  bath  Having  Zinc  purity  of  bath minimum 98.5% Quenching & Passivation Process.
8  to  12  mm  dia  with  prior  approval  of  concerned  Superitending Engineer.
As directed by Engineer-in-charge M.T. 16941.00 2880.00
1714 Block masonary 50.23 BD-I Providing   and   constructing   non   load   bearing   wall   with  200   mm Horizontally perforated THERMO clay hollow blocks with compressive strength  not  less  than  35kg/Sqcm,  U  value  of  0.60  W/m2K,  Water Absorption  of  15%  mansonry   to  be  done using  sand cement  mortar 1:6  with  blocks  of  size  400mm  x  200  mm  x  200  mm  (12.5  brick  per Sqm.  excluding  mortar  joint  thickness)  including  cost  of  material, labour  charges,  scaffolding,  curing  at  all  height,  complete  as  per specification & directions of Engineer in charge. Cost shall be inclusive of  filling  the  blocks  with  cement  mortar  at  exposed  junctions  and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast.anchors etc. It must be green building certified  from  IGBC  and  Griha  and  Should  comply  IS  code  3952  with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2840.00 555.00
1715 Block masonary 50.24 IS code 3952 Providing  and  constructing   non  load  bearing  wall  with  150  mm Horizontally perforated THERMO clay hollow blocks with compressive strength  not  less  than  35kg/Sqcm,  U  value  of  0.60  W/m2K,  Water Absorption  of  15%  mansonry   to  be  done using  sand cement  mortar 1:6  with  blocks  of  size  400mm  x  150  mm  x  200  mm  (12.5  brick  per Sqm.  excluding  mortar  joint  thickness)  including  cost  of  material, labour  charges,  scaffolding,  curing  at  all  height,  complete  as  per specification & directions of Engineer in charge. Cost shall be inclusive of  filling  the  blocks  with  cement  mortar  at  exposed  junctions  and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast.anchors etc. It must be green building certified  from  IGBC  and  Griha  and  Should  comply  IS  code  3952  with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge SQM 2750.00 467.00
1716 Plastering and pointing 50.25   Dry wall cladding with clay tile; Designing, supplying and fixing of  Clay tile  of  Wienerberger  (Red  Series  or  Grey  Series)  or  Equivalent  with suitable size and thickness not less than 20 mm as per manufacturer with   approved   colour   and   pattern   with   composition   of   finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable   farming   system   by   using   continuous   aluminium   profiled section   as   per   manufacturer   with   suitable   size   and   spacing   to withstand  the  structural  design  criteria  specifled  in  the  technical specification  by  using  necessary  HDG  brackets,  SS316  grade  anchor bolts etc as per manufacturer specification. Cladding joints should be with   open   groove   system.   with   prior   approval   of   concerned Superitending Engineer. As directed by Engineer-in-charge SQM 10590.00 400.00
1717 Block masonary 50.26   Providing  and  constructing   non  load  bearing  wall  with  200  mm Grinded Horizontally perforated clay hollow blocks with compressive strength  not  less  than  35kg/Sqcm,  U  value  of  1.00  W/m2K,  Water Absorption of 15% tolerance on  Grinded brick height is +/- 1.00 mm, masonry to be done using POROTHERM Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per  Wienerberger  methodology)  blocks  of  size   400mm  x  200  mm  x
200  mm  (12.5  brick  per  Sqm.)  including  cost  of  material,  labour charges, scaffolding, curing at all height, complete as per specification &  directions  of  Engineer  in  charge.  Cost  shall  be  inclusive  of   end bricks  to  be  used  at  window  and  door  jambs  for  fixing  hold  fast. anchors etc.,plastering is to be done as per requirement .and is to be considered seperatly  with prior approval  of concerned Superitending Engineer.
As directed by Engineer-in-charge SQM 1822.00 130.00
1718 Block masonary 50.27   Providing  and  constructing   non  load  bearing  wall  with  150  mm Grinded Horizontally perforated clay hollow blocks with compressive strength  not  less  than  35kg/Sqcm,  U  value  of  1.2  W/m2K,  Water Absorption of 15% tolerance on   Grinded brick height is+/- 1.00 mm, masonry to be done using  Dry Flx. Systeam with 20 mm thick S shape application   (Application   method   need   to   be   followed   as   per Wienerberger  methodology)  blocks  of  size   400mm  x  150  mm  x  200 mm  (12.5  brick  per  Sqm.)  including  cost  of  material,  labour  charges, scaffolding,  curing  at  all  height,  complete  as  per  specification  & directions  of Engineer in charge. Cost shall  be inclusive of end bricks to  be  used  at  window  and  door  jambs  for  fixing  hold  fast.  anchors etc.,plastering   is   to   be   done   as   per   requirement   and   is   to   be considered seperatly As directed by Engineer-in-charge SQM 1650.00 130.00
1719 Block masonary 50.28 BD-I Providing  and  constructing   non  load  bearing  wall  with  100  mm Grinded Horizontally perforated clay hollow blocks with compressive strength  not  less  than  35kg/Sqcm,  U  value  of  1.7  W/m2K,  Water Absorption of 15% tolerance on   Grinded brick height is +/- 1.00 mm, masonry to be done using  Dry Flx. Systeam with 20 mm thick S shape application   (Application   method   need   to   be   followed   as   per Wienerberger  methodology)  blocks  of  size   400mm  x  100  mm  x  200 mm  (12.5  brick  per  Sqm.)  including  cost  of  material,  labour  charges, scaffolding, curing at all height, RCC. stiffener band necessary at every
1.0   meter   height   of   the   wall,   complete   as   per   specification   & directions of Engineer in charge. Cost shall be inclusive of  end bricks to  be  used  at  window  and  door  jambs  for  fixing  hold  fast.  anchors etc.,,plastering   is   to   be   done   as   per   requirement   ,and   is   to   be considered seperatly  with prior approval  of concerned Superitending Engineer.
As directed by Engineer-in-charge SQM 1325.00 130.00
1720 Plastering and pointing 50.29 BD-I Providing and fixing of imported clay tiles pn M.S. frame Work using Maditerranean plus roof tiles of Wienberger tile of colour Red Engobe or equivalent with necessary accessories required to fix tile including clips  and  screw  (Prior  permission  of  S.E.  is  to  be  obtained  before inclusion) As directed by Engineer-in-charge SQM 3062.00 555.00
1721 Waret supply and sanitary 50.30 BD-V Providing      and      fixing      Ductile      iron      manhole      cover      of light/medium/heavy  duty  with  frame  of  any  size  over  inspection chamber  etc.  complete  (Prior  permission  of  S.E.  is  to  be  obtained before inclusion of this item in the estimate) As directed by Engineer-in-charge Kg 75.00 12.00
1722 Waret supply and sanitary 50.31 BD-V Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation,  laying  1:4:8  cement  concrete  bedding  15  cm  thick  burnt brick  mansonry  with  1:1  cement  mortar  plaster  25  mm  thick  inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125 kg in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable  to  heavy  theatric  loading,  Light  weight  casting  after  cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge No. 12000.00 2040.00
  Geosynthetic 50.32 MORTH Section- 700 Providing  and  laying  CE  Marked  Woven  Polypropylene  Geotextile indigenously  manufactured  from  black  UV  stabilized  polypropylene tape    yarn    of    Techfab    India    on    the    prepared    subgrade    for Reinforcement  cum  separation  cum  drainage  &  filtration  application with necessary overlaps as per drawing etc. complete. (Specification: MORTH Section-700) with prior approval  of concerned Superitending Engineer. As directed by Engineer-in-charge      
1723 a)TFI-5300 Type-I   SQM 160.00 44.00
  Geosynthetic 50.33 MORTH Section- 700 Providing   and   laying   CE   Marked   Woven   Multifilament   Polyester Geotextile  indigenously  manufactured  using  high  molecular  weight, high  tenacity  polyester  filament  yarn  with  high  tensile  strength,  low elongation and low creep of Techfab India on the prepared subgrade for   Reinforcement   cum   separation   cum    drainage   &    filtration application  with  necessary  overlap  as  per  drawing  etc.  complete. (Specification: MORTH Section-700) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1724 a   a) TFI-3100   SQM 160.00 44.00
1725 b   b) TFI-3200   SQM 224.00 44.00
  Geosynthetic 50.34 MORTH Section- 700 Providing  and  laying  CE  Marked  Needle  Punched  and  Mechanically Bonded Non-Woven Geotextile (TechGeo) indigenously manufactured from high quality polypropylene staple fibres (continuous filament will not  be  accepted)  of  Techfab  India  on  the  prepared  subgrade  for separation,   drainage &  filtration application with necessary  overlaps as  per  drawing  etc.  complete.  (Specification:  MORTH  Section-700  ) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1726 a a) TFI TECHGEO PR-15   SQM 134.00 44.00
1727 b b) TFI TECHGEO PR-20   SQM 151.00 44.00
1728 c c) TFI TECHGEO PR-30   SQM 167.00 44.00
1729 d d) TFI TECHGEO PR-40   SQM 207.00 44.00
1730 e e) TFI TECHGEO PR-60   SQM 279.00 88.00
  Geosynthetic 50.35 MORTH Section- 700 Providing  and  Laying  CE  marked  Knitted  and  PVC  coated  Polyester Biaxial   Geogrid   (Techgrid)   for   Basal   Reinforcement   indigenously manufactured   from  selected  high  tenacity  polyester  yarn  with  high molecular weight of Techfab India (> 25000 g/mol), and low carboxyl end group (<30mmol/kg)  (extruded PP geogrids &  Polyester strips  & Geostrips,  Steel  Strips  not  allowed  &  not  accepted).  Requirement  of geogrid   strength   in   both   direction   and   granular   fill.   (Coating   of Geogrid/ reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other coating will not be allowed and will  not be accepted). For reinforcement application to subgrade, unbound sub base / base courses   &  soil   stabilization,  etc.  complete  (Specification:   MORTH Section-700). with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1731 a a) TFI TechGrid GeoGrid TGB-40   SQM 199.00 44.00
1732 b b) TFI TechGrid GeoGrid TGB-60   SQM 240.00 44.00
  Geosynthetic 50.36 MORTH Section- 700 Providing and laying CE Marked PP Extruded Biaxial Geogrid for basal reinforcement,  indigenously  manufactured  from  virgin  high  density polypropylene  of  Techfab  India  having  aperture  size  of  (38  x  38)mm and  ultimate  tensile  strength  of  20  kN/m  on  both  direction  with minimum junction strength of 95% & minimum radial stiffness of 350 kN/m   (@0.5%   strain   for   reinforcement   application   to   subgrade, unbound  sub  base  /  base  courses  &  soil  stabilization,  etc.  complete (Specification: MORTH Section-700).with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1733 a a) TFI TechGrid GeoGrid PP2020   SQM 230.00 44.00
1734 b b) TFI TechGrid GeoGrid PP3030   SQM 296.00 44.00
  Geosynthetic 50.37 MORTH Section- 700 Providing  and  laying  CE  Marked  knitted  and  PVC  coated  Polyester Uniaxial Geogrid (Techgrid) indigenously manufactured from selected high  tenacity  polyester  yarn  with  high  molecular  weight  of  Techfab India  (> 25000 g/mol), and low carboxyl end group (<30 mm mol /Kg) (extruded  PP  geogrid  &  Polyester   strip  &  Geostrip,  steel  strips  not allowed & not accepted ) with granular fill as per design prepared by technical  provider of reinforced earth wall  and  slope. The  reinforced earth wall and slope should have 100% coverage of 5m width knitted and  PVC  coated  Polyester  geogrid.  (Coating  of  Geogrid/Reinforcing geosynthetic   material   with   LDPE,   Latex,   Bitumen   and   any   other coating  will  not  be  allowed  and  will  not  be  accepted)  for  reinforced soil wall and reinforced slope application, etc. complete (Specification: MORTH Section-3100).with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1735 a a) TFI TechGrid GeoGrid TGU-40   SQM 181.00 44.00
1736 b b) TFI TechGrid GeoGrid TGU-60   SQM 202.00 44.00
  Geosynthetic 50.38 MORTH Section- 700 Providing and laying Geocell-Techcell CE Marked a three dimensional honeycomb  like  cellular  confinement  system  having  weld  spacing 356mm   and   cell   depth   150mm   of   Techfab   India,   indigenously manufactured   by   blend   of   various   polyethylene   and   additives, polyethylene   strips   ultrasonically   welded   consists   of   a   multiple rhomboidal   indentations   over   the   entire   strip   on   the   prepared subgrade  for  subgrade  stabilization  by  reinforcement  and  drainage application for roads, ground improvement work and erosion control of slopes etc. complete. (Specification: MORTH Section-700) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1737 a a) TFI TechCell GeoCell-356x150   SQM 560.00 44.00
1738 b b) TFI TechCell GeoCell-660x75   SQM 326.00 44.00
  Geosynthetic 50.39 MORTH Section- 700 Providing  and  laying  CE  Marked  Reinforced  Non-Woven  Composite indigenously     manufactured     needle     punched     polypropylene (continuous   filament   will   not   be   accepted)   of   Techfab   India, Reinforced  with  high  tenacity  Polyester  Yarn   on  the  prepared  sub grade  for  Reinforcement  cum  separation  cum  drainage  &  filtration application  with  necessary  overlaps  as  per  drawing  etc.  complete. (Specification:  IRC:SP:59-MORTH  Section-700)  with  prior  approval  of concerned Superitending Engineer. As directed by Engineer-in-charge      
1739 a a) TFI TGC-60   SQM 207.00 44.00
1740 b b) TFI TGC-90   SQM 252.00 44.00
  Geosynthetic 50.40 MORTH Section- 700 Providing and inserting CE Marked Prefabricated Vertical Drain / Band Drain (TechDrain)   of Techfab India  indigenously manufactured    with Polypropylene  Core  and  wrapped  with  Non-Woven  Geotextile  in  the very soft clay to a design depth for quick consolidation etc. complete. (Specification: MORTH Section-700).with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1741 a a) TFI TechDrain TD-3520 U 100mm x 4mm   RMT 73.00 4.00
1742 b b) TFI TechDrain TD-5020 U 100mm x 5mm   RMT 87.00 4.00
  Geosynthetic 50.41 MORTH Section- 700 Providing    &    fixing    CE    Marked    Metal    Gabions    indigenously manufactured   as   per   required   section   including   boxes   made   of mechanically woven hexagonal shaped wire mesh of type, (8 x 10)cm, edges mechanically selvedged made of heavily (Zinc + PVC) coated G.I. wires  as  per  BS:443,  mesh  wire  2.70/3.70  mm  Ø  (ID/OD),  edge  wire 3.40/4.40 mm Ø (ID/OD) of Techfab India type and filled with 20 to 50 Kg weight trap stones including conveying with all leads and lifts and placing  at  required  places  in  required  line,  level,  slope,  section  as directed, etc. and tied by 5% lacing wire 2.20/3.20  mm Ø (ID/OD) as directed by Engineer-in-charge. For retaining walls, toe walls, etc. for slope  protection  &  erosion  control  application  of  river  bank  &  sea- shore  etc.  complete  (Specification:  MORTH  section-2500.  (Excluding Rubble) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1743 a a) For 1m height   Cum. 1953.00 88.00
1744 b b) For 0.5m height   Cum. 2280.00 44.00
  Geosynthetic 50.42 MORTH Section- 700 Providing and laying  CE Marked Glassfibre GeoComposite (TechGlass AIC)  indigenously  manufactured  from  high  performance  glass  fibre roving   to   form   a   reticular   structural   material   with   a   unique combination of fused fibre glass and polypropylene non-woven needle punched geotextile to asphalt overlay flexible pavements and asphalt overlay     distressed     rigid     pavements     of     Techfab     India     for Reinforcement,  seizure  reflective  cracks,  reduced  surface  rutting  & water   infiltration.   (Specification:   MoRTH   section-700).with   prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1745 a a) TFI Techglass AIC-50   SQM 240.00 44.00
1746 b b) TFI Techglass AIC-100   SQM 268.00 44.00
  Geosynthetic 50.43 MORTH Section- 700 Providing and laying a Paving Fabric  CE Marked Needle Punched and Mechanically   Bonded   Non-Woven   Geotextile   of   Techfab   India, indigenously  manufactured  from  high  quality  polypropylene  staple fibres (continuous filament will not be accepted) with heat treatment on one side to  form a  strong, flexible and  dimentionaly  stable  fabric structure, with optimum bitumen retention capacity to asphalt overlay over   flexible   pavement   and   distresses   regid   pcc   pavement   for moisture   barrier,   avoid   refelective   cracking   and   stress   relieving membrane  with  necessary  overlaps  as  per  drawing,  etc.  complete. (Specification: MORTH section-700). with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1747 a) TFI TechPave-C040   SQM 116.00 44.00
  Geosynthetic 50.44 MORTH Section- 700 Providing and laying Fin Drains (Drainage Composite) TFI TDC-55130W CE    Marked   indigenously    manufactured   by    thermo    bonding   a polypropylene drainage core- Geonet comprises of two sets of parallel overlaid  ribs  integrally  connected  to  have  a  rhomboidal  shape  and Needle  Punched  &  Thermally  Bonded  Nonwoven  Geotextile  on  the prepared sub base of paved/unpaved roads  &  behind the RE wall  by replacing  granular  filter  media  for  separation,   drainage  &  filtration application  with  necessary  overlaps  as  per  drawing  etc.  complete  . (Specification: MORTH Section-700 ) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1748 a) TFI TDC-55130W   SQM 431.00 44.00
  Geosynthetic 50.45 MORTH Section- 700 Construction   of   Reinforced   Earth   Wall   in   M-35   Block   Facia   by Providing  and  Laying  CE  marked  Knitted  and  PVC  coated  Polyester Uniaxial    Geogrid    (Techgrid)    of    Techfab    India    indegeniously manufactured   from  selected  high  tenacity  polyester  yarn  with  high molecular  weight  (>  25000  g/mol),  and  low  carboxyl   end   group (<30mmol/kg)   for   Reinforced   soil   wall   (extruded   PP   geogrids   & Polyester strips & Geostrips, Steel Strips not allowed & not accepted) with  granular  fill  of  PHi-32  degree  (design  is  to  be  carried  out  in accordance  with  BS-8006  /  FHWA)  with  concrete  block  by  M-35  as facia,  casting  &  erection  of  blocks  with  Techgrid,  providing  &  laying levelling  pad  by  M-15,  providing  and  laying  coping  beam  by  M-35, providing  and  laying  300mm  thick  filtermedia  etc.  completed  as  per necessary  drawing  and  instruction  of  Engineer-in-charge.  Excluding providing,  laying  and  compacting  selected  backfill  and  retained  fill behind  the  wall,  excavation  and  ground  improvement,  if  any.  The reinforced  earth  wall  and  slope  should  have  100%  coverage  of  5m width Knitted and PVC coated Polyester Geogrid. (Coating of Geogrid/ Reinforcing geosynthetic material with LDPE, Latex, Bitumen and any other   coating   will   not   be   allowed   and   will   not   be   accepted). (Specification: MORTH Section-3100) with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1749 a a) RE Wall Height 1 to 4 meter   SQM 5486.00 44.00
1750 b b) RE Wall Height 4 to 6 meter   SQM 5832.00 88.00
1751 c c) RE Wall Height 6 to 8 meter   SQM 6085.00 132.00
1752 d d) RE Wall Height 8 to 10 meter   SQM 6313.00 177.00
1753 e e) RE Wall Height 10 to 12 meter   SQM 6831.00 221.00
1754 f f) RE Wall Height 12 to 14 meter   SQM 7285.00 265.00
  Road safty work 50.46 IS: 10146-1982, IS:10141-1982 Providing   Heavy   Duty   Fibre   Glass   Reinforced   Plastic   Temporary Barricade of 1.75 m hight, with base width of 430 mm as a provision to   accept   water   ballasting   of   101   Itrs-110    Ltrs   approx.   and arrangement   for   traffic   diversion   such   as   traffic   signals   during construction  at  site,  for  day  and  night  as  per  requirement.  The  raw material  shall  be  UV  stabilized  Linear  Low  Density  Polyethylene  and should meet the  requirements stipulated in standard IS: 10146-1982, IS:10141-1982  and should also comply to FDA:CFR Title 21.177.1520. Olefin  Polymers  ,  with  specific  FRP  Grade  300-104  reinforced  during moulding  process  to  the  permissible  extent  for  improved  impact strength. Qualification Criteria:  For qualifying  the   sample  , few  tests shall  be  performed  at  Government  Lab  OR  NABL  Accredited  Lab  on Site Safety Fence sample, failure or deviations in test results of sample shall be disqualified.The tests and qualifying results are as under, (a) tensile strength at yield by ASTM D 638 =20.93 mPA, (b) Elongation at break ASTM D 638 = 121.66 mPA (c)  Flexural Modulus ASTM D 790 =
633.76 mPA (d) Izod Impact Strenth (Notched) ASTM D 256 = 4.41 Kg / Sqm  (e)  Izod Impact  Strenth (Un-Notched)  ASTM D  256 =  67.04 Kg  / Sqm (f) Drop Impact strength 25 Kg Load from 1 m, 2 m & 5m height the  weight  of  empty  single  Rotomoulded  Plastic  Barricade  without water  ballasting  shall  be  34  kgs  approx.  &  total  weight  after  water allasting  shall  be  135  kgs  -140  kgs  +/-  5  kgs  (tolarance)The  main Barricade  body  of  hight  1750  mm  approx  is  connected  with  the Extension  body  through  4  set  of  nut  bolt  washers  .extenstion  body through 4 set of nut bolt  washers. Extension body is designed with 9 Nos kiss offs on rear side; the dimension of Extension body are 1500 mm  (length),70  mm  (width),250  mm  (effetive  height  after  fixing  )  &
As directed by Engineer-in-charge      
        to fix two brackets at both end in corner for anchoring purpose .each rear bracket is constructed through rod of Dia.60 mm with curvature welded with  MS strip of 3 mm thick ,50 mm width and 90  mm length at  its  top  and  base  ,effective  bracket  shall  be  410  mm  approx.  the anchoring hole in each bracket shall be 18 mm dia. for routine the MS bolts of 16 mm thickness and 150 mm length with sharp pointed edge at one end .the upper part of each bracket shall have a slot size of 30 mm   x   10   mm   for   connecting   it    with   barracade   model   through bolts.similarly front bracket for site safety fence is 3 mm thick ,50 mm width,  feective  height  after  single  bend  is  230  mm  and  anchoring  in each  bracket  shall  be  dia  18  mm  unique  safety  feature  for  firm gripping   to   prevent   from   displacement   and   falling    when   inter connected   even   without   water   filling   .   There   shall   be   7   no's premoulded  inserts  on  site  Safety  Fence  for  following  application: 2no's   for   safety   latches   interconnectivity,   2   no's   for   fixing   rear brackets  for  anchoring,  one  no.  at  front  side  for  fixing  the  front bracket  for  higher  stability,  and  2  nos  on  Extension  top  for  holding light  brackets  /  Rod  for  cloth  holding.  The  plastic  barricades  has  a strong vertical rib of 1740 mm length at the rear centre & 72 No's of kiss offs spread on entire rear surface , the  water container (bottom) will  also  be  equipped  with  2  additional  ribs  on  top  to  withstand nominal  load  if  applied  over  its  surface.  The  Fibre  glass  Reinforced Plastic  Site  Safety  Fence  shall  have  one  drain  bung  insert  moulded with  plastic  plug  ,  two  injection  moulded  water  caps/  lids  for  base tank,   and   one   yellow   black   zebra   reflective   tape   as   integrated accessories.  Please  refer  the  detailed  drawing  of  Site  Safety  Fence. During construction barricading and arrangement for traffic diversion        
1755 a a) For 725 mm height  (LType Jersey Barrier ) ,Empty Weight:6.67 Kg/ Rgm,Weight Full : 35.89 Kg / Rgm approx. (After Water / Sand Filling)   RMT 1846.00 314.00
1756 b b)  For  750  mm  height    (With  Interlocking  provison   -  For   Traffic Delineation Applications ) , Empty Weight:9.04 Kg/ Rgm,Weight Full :
57.14 Kg / Rgm approx. (After Water / Sand Filling)
  RMT 2872.00 488.00
1757 c c) For 750 mm height  ( Jersey Barrier Model with unique Interlocking
Provision)   , Empty Weight:9.0 Kg/ Rgm,Weight Full : 55.00 Kg / Rgm approx. (After Water / Sand Filling)
  RMT 5026.00 854.00
1758   d   d)   Site  Safety  Fence   (1.75  Mtrs(H))  (Efficient  Substitution  to  sheet Metal Barricade)  , Empty Weight 16.57: Kg/ Rgm,Weight Full : 74.29 Kg / Rgm approx. (After Water / Sand Filling)   RMT 8103.00 1377.00
1759 e e)   Site  Safety  Fence   (2.00  Mtrs(H))  (Efficient  Substitution  to  sheet Metal Barricade)  , Empty Weight : 17.00 Kg/ Rgm,Weight Full : 70.00 Kg / Rgm approx. (After Water / Sand Filling)   RMT 8718.00 1482.00
1760 Road work 50.47 RD organosilance     Nanotechnology     for     Bituminous     organosilance nanotechnology  such  as  Zycotherm  added  in  the  bitumen  binder  @ 0.1%  dosage  to  the  weight  of  the  bitumen  at  HMA  plant  to  schive chemical  bonding,complete  coating  and  consistant  compaction  in various               bituminous               mixes               such               as BM/DBM/Carpet/sealcoat/MSS/SDBC   etc.as   per   the   direction   of Engineer-in-charge  with  prior  approval  of  concerned  Superitending Engineer. As directed by Engineer-in-charge Kg 1400.00 238.00
1761 Road work 50.48 RD Water proofing of subgrade:waterproofing on top compacted (as per relevant MORT&H specification)sub grade and shoulder soil base with organosilance Nanotechonology & nano acrylic co-polymer with water (<1000 ppm TDS)in the ratio of 1 kg Organosilance  Nanotechonology
:1  kg  nano  acrylic  co-polymer  :200  liter  water  spray  @3  liter/sqm  in two  spray  application  (1.5  liter  +1.5  liter)  as  per  direction  of  the Engineer-in-charge.  with  prior  approval  of  concerned  Superitending Engineer.
As directed by Engineer-in-charge SQM 14.78 2.00
1762 Road work 50.49 RD providing   and   applying   primer   coat   with   bitumen   emulsion   on prepared surface of Aggregate layer including clearing of road surface and spraying primer mixed with Nano- Technology silance in the ratio 1:100:100 (1 kg silance :100 kg SS1 Emulsion:100 liter water);the rate of   1   Liter/Sqm   using   mechanical   means   as   per   the  direction   of Engineer-in-charge.  with  prior  approval  of  concerned  Superitending Engineer. As directed by Engineer-in-charge SQM 18.09 3.00
1763 Road work 50.50 RD Tack  coat  (with  Silance  nanotechnology):preparing  and  applying  of water soluable organo silance nanotechnology (for bitumen emulsion application ,IRC approved) with cationic bitumen emulsion CRS1 amd water (< 1000 ppm TDS) in the ratio of 1:4 kg  organo  silance : 100 kg cationic bitumen emulsion CRSS1: 200 liter water. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge SQM 8.37 1.50
1764 Road work 50.51 RD Construction of stabilised soil base with organo silance  by providing locally available moorum/soil(70%) mixed with 30% GSB ? with 2% cement by MDD of mix, 0.6 kg/Cum nanotechnology silane & 0.6 kg/ cum of Acrilic Nano - Co polymer, Spreading in uniform layers with grader on prepared surface by mixing in place method withrotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of Engineer - in -charge. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge CUM. 1613.00 275.00
1765 Road work 50.52 RD Construction of stabilised soil base with organo silance  by providing locally available moorum/soil(70%) mixed with 30% GSB ? with 3% cement by MDD of mix, 0.6 kg/Cum nanotechnology silane & 0.6 kg/ cum of Acrilic Nano - Co polymer, Spreading in uniform layers with grader on prepared surface by mixing in place method withrotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of Engineer - in -charge.with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge CUM. 1700.81 289.00
1766 Road work 50.53 RD Construction of stabilised soil base with organo silance  by providing locally available moorum/soil(70%) mixed with 30% GSB ? with 4% cement by MDD of mix, 0.6 kg/Cum nanotechnology silane & 0.6 kg/ cum of Acrilic Nano - Co polymer, Spreading in uniform layers with grader on prepared surface by mixing in place method withrotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Table 2.3 of IRC SP - 77-2008 as per direcion of Engineer - in -charge. As directed by Engineer-in-charge CUM. 1788.62 304.00
1767 Road work 50.54 RD Supplying  trap/granite/quartzite/gneiss  stone  metal  of  required  size by bringing  the boulders  / Rubble  at the  road side  breaking them  to required  gradation  including  conveying  the  boulders  /Rubble  and stacking  the  broken  metal  etc.  complete  .  (Prior  approval  of  sample stack  of  broken  metal  by  the  Ex.  Engineer  is  necessary  the  date  of approval will form part of the measurements)                            a)80 mm Metal,  By  breaking  rubble  obtained  by  blasting.(Hand  broken).  with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge CUM. 730.00 325.00
1768 Road work 50.55 RD Supplying  trap/granite/quartzite/gneiss  stone  metal  of  required  size by bringing  the boulders  / Rubble  at the  road side  breaking them  to required  gradation  including  conveying  the  boulders  /Rubble  and stacking  the  broken  metal  etc.  complete  .  (Prior  approval  of  sample stack  of  broken  metal  by  the  Ex.  Engineer  is  necessary  the  date  of approval will form part of the measurements)                            a)40 mm Metal, By breaking rubble obtained by blasting.(Hand broken). As directed by Engineer-in-charge CUM. 780.00 350.00
1769 Road work 50.56 RD Supplying  trap/granite/quartzite/gneiss  stone  metal  of  required  size by bringing  the boulders  / Rubble  at the  road side  breaking them  to required  gradation  including  conveying  the  boulders  /Rubble  and stacking  the  broken  metal  etc.  complete  .  (Prior  approval  of  sample stack  of  broken  metal  by  the  Ex.  Engineer  is  necessary  the  date  of approval  will  form  part  of the  measurements)                          a)80  mm Metal, By breaking Boulders (Hand broken). As directed by Engineer-in-charge CUM. 700.00 335.00
1770 Road work 50.57 RD Supplying  trap/granite/quartzite/gneiss  stone  metal  of  required  size by bringing  the boulders  / Rubble  at the  road side  breaking them  to required  gradation  including  conveying  the  boulders  /Rubble  and stacking  the  broken  metal  etc.  complete  .  (Prior  approval  of  sample stack  of  broken  metal  by  the  Ex.  Engineer  is  necessary  the  date  of approval will form part of the measurements)                            a)40 mm Metal, By breaking Boulders (Hand broken). As directed by Engineer-in-charge CUM. 750.00 360.00
1771 Road work 50.58 RD Spreading   80/40  mm  metal  for  road  work  including  sectionong  etc complete as directed by Engineer in charge . As directed by Engineer-in-charge CUM. 85.00 75.00
1772 Road work 50.59 RD Compacting  the  sub  grade/gravel/oversize  metal  (200  mm  loose) layers  for  all  width  with  Power  roller  having  weight  8  to  10  MT. including necessary, labour, materials and artificial watering complete. As directed by Engineer-in-charge SQM 27.00 4.00
1773 Road work 50.60 RD Compacting  the  sub  grade/gravel/oversize  metal  (200  mm  loose) layers  for  all  width  with  Vibratory  roller  having  weight  8  to  10  MT. including necessary, labour, materials and artificial watering complete. As directed by Engineer-in-charge SQM 37.00 4.00
1774 Road work 50.61 RD Compacting the sub grade / gravel / size metal (100 mm loose) layers for  all  widths  with  Power  roller  having  weight  8  to  10  MT.  including necessary, labour, materials and artificial watering complete. As directed by Engineer-in-charge SQM 25.00 4.00
1775 Road work 50.62 RD Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with vibratory roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. As directed by Engineer-in-charge SQM 34.00 4.00
1776 Miscellaneous 50.79 BD-W Providing   and   applying   two   coats   Apex   Ultima   Puranature   Anti- Pollution  Or  equivalent  approved  brand,  paint  should  decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes,   etc.)   in   presence   of   natural   or   artificial   light.   It contains  Graphene and nanoparticles  of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured  Crack  filler,  Paint  has  to  applied  on  one  coat  of  Apex Ultima   Puranature   Anti-Pollution   Primer   or   Equivalent.   Warranty Should be given by the Manufaturer The work should be done by the Manufacturer  Recommended  applicator  and  he  should  be  able  to furnish   stage   wise   onsite   technical   reports   from   the   concerned company technologist. As directed by Engineer-in-charge SQM 371.89 0.00
1777 Miscellaneous 50.80 BD-W Supply   of   ready   mix   patch   repairing   compound   as   per   section 3000.2.2(filling  pothole  and  patches  repair  with  specific  approval  of the engineer),MORT&H specifications for roads and bridge works,5th Revision,  for  instant  repair  of  surface  defects  of   road  under  all weather   conditions.The   premix   should   consists   of   a   binder   with hydrophilic  properties  and  accelerated  adherence  to   all  types   of aggregares  and can be applied on all  patches  and potholes  including water  logged  patches  and  poyholes  and  in  rainy  conditions.  The material  should  be  suitable  for  both  Bituminous  and  concrete  roads with quick setting properties and allow traffic to be released within 10 mins.of patch or pothole repair.the material  should for use on roads with  both  passanger  and  heavy  commercial  vechiles.The  mix  should be suitable for reparing of surfacing course and should be comparising of fine aggregates 0-10 mm,(5.5-7.5 %).additives as ewquired.the mix should  packed in  bags  which  can be  easily  handled  manually  and  be storable under normal storage conditions for at least 8 month. As directed by Engineer-in-charge Kg 25.00 0.00
  Door and Windows 50.81 BD-T Fire   Door   45mm   1HR   FRL   (60/60)   3   Criteria   -   INTEGRITY   / INSULATION/   STABILITY   WOODEN   DOOR   -   Fire   Door   Tested   in
accordance to IS: 3614 Part 2.
As directed by Engineer-in-charge      
        Providing of Tufwud make 60 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator  and/or  with  Central  Building  Research  Institute,  Govt  of India  undertaking  with  standard  heating  conditions  as  specified  in IS:3614  Part  II  1992  and  BS:  476  part  20  &  22  1987  to  achieve  the required  integrity,  insulation  and  stability  (i.e.  to  restrict  the  heat radiation,  temperature  rise  on  the  non  fire  side  to  the  maximum  of 140° C above the ambient temperature on the exposed surface of the shutter.   The   fire   doors   are   tested   with   NCBN   technology   ("Non Combustible    by    Nature").    with    prior    approval    of    concerned Superitending Engineer.        
1778       a)  Door  Frame:  Supplying  'Tufwud'  brand  frames  for  Fire  resistant door  shutters  1st  class  Malaysian  Hardwood  Frame  densified  (810 kg/cum) and pressure treated with fire retardant chemicals in vacuum impregnation  vessel  under  160  psi  pressure  as  per  IS:401and  kiln seasoned to  moisture below 15% as  per IS:1141  of section  120 X  60 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron,  with  single  row  of  Brush-  Type  ASTROFLAME  intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.   RMT 963.80 162.00
1779       b)Shutter  :  Providing  of  65mm  thick  asbestos  free  composite  -  3 criteria - fire, heat and smoke check Accoustic Door Shutter with flame guard  of  120  minutes  IS3614  part  -II  comprising  of  2x9mm  Calcium Silicate  boards,  Chemical  treated  internal  timber  with  Fire  retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per  IS:401and  kiln  seasoned  to  moisture  below  15%  as  per  IS:1141 frame  work  of  100x32  mm  with  32mm  thick  infill  of  ceramic  fiber (density 128Kgs/CMT), vermaculite mix faced with 6mm Fire retardant High Density ply, internally lipped with hardwood beading, and pasted in  Hydraulic  Press  under  50  tonnes  pressure,  spray  quoted  with  2 coats of In tumescent paint of minimum 200 micron, and with 1 row of  Brush-  Type  Astroflame®   intumescent  strip   (imported)  of  size 10mmx4mm  concealed  for  fire  and  smoke  sealing  in  the  grooves  in the shutter on all edges except bottom, without any external lipping.   SQM 5808.60 639.00
1780       c) Vision Panel:
1  HR  rated  E  Class  clear  high  stress  fire  rated  glass  is  pre  fabricated strategically inside the
shutter  structure  with  10  mm  inside  the  shutter  on  all  sides  with  U- glazing. An additional
insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the
joints.   With   clear   fire   resistant   glass   panes   11mm   thick   having minimum 120 minutes fire
Description
  SQM 34696.00 30.00
  Door and Windows 50.82 BD-T Providing of Tufwud make Accoustic Door to effectively control noise inconference   rooms,   broadcasting   studios,   theatres   and   music practice   rooms.   with   prior   approval   of   concerned   Superitending Engineer. As directed by Engineer-in-charge      
1781       a)Door  Frame:  Providing  Frames  for  Accoustic  door  shutters  with double rabbit of 68mm 1st class Malaysian Hardwood Frame densified and  pressure  treated  with  chemicals  in  vacuum  impregnation  vessel under  160  PSI  pressure  as  per  IS:401and  kiln  seasoned  to  moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats  of  In  tumescent  paint  of  minimum  200  micron,  with  1  row  of Hafele Accoustic seals concealed in the groove of the Frame for noise control, etc. complete as per direction of Engineer in Charge   RMT 1315.70 162.00
1782       b)Shutter:  Providing  of  65mm  thick  Accoustic  Door  Shutters  with wooden structure comprising of Chemical treated internal timber with anti termite chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x 48 mm with 48 mm thick infill of ceramic vermiculite  mix  of  density  54Kgs/CMT,  3mm  sheet  rubber  interlayer sheet on one side for acoustic property, faced with 6mm High Density Waterproof  Ply  confirming  to  IS  Code  2201,  internally  lipped  with hardwood  beading,  and  pasted  in  Hydraulic  Press  under  50  tonnes pressure,  spray  quoted  with  2  coats  of  PU  paint  of  minimum  200 micron of color of engineer choice (any Veneer or Lamination will cost extra),  without  any  external  lipping  along  with  double  rebatting  in shutters & accoustic seal   SQM 10402.90 162.00
  Door and Windows 50.83 BD-T 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm  2HR  FRL  (120/120)  3  Criteria  -  INTEGRITY  /  INSULATION/
STABILITY  WOODEN  DOOR  -  Fire  Door  Tested  in  accordance  to  IS: 3614 Part 2. with prior approval of concerned Superitending Engineer
As directed by Engineer-in-charge      
        Providing of Tufwud make 120 min Fire rated lead lined doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per  the  IS:  3614  Part  2  and  BS:  476  part  22  with  standard  heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C  above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non  Combustible  by  Nature").  Lead  lined  to  check  radiation.  Code No;  2  Hour Insulated,  Flame, Smoke  Radiation check  Lead Lined  Fire Door 57mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/
STABILITY  WOODEN  DOOR  -  Fire  Door  Tested  in  accordance  to  IS: 3614 Part 2.
       
1783       a)  Door  Frame:  Providing  Frames  for  Lead  Lined  Fire  resistant  door shutters 1st class Malaysian Hardwood Frame densified and pressure treated  with  fire  retardant  chemicals  in  vacuum  impregnation  vessel under  160  PSI  pressure  as  per  IS:401and  kiln  seasoned  to  moisture below  15% as  per IS:1141  of section  140 X  70  mm  with 45mm  thick two  layered  3mm  Lead  Line  Sheets  with  10mm  overlap  from  either side &  spray  quoted with 2 coats  of  In tumescent  paint of  minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge   RMT 2314.90 485.00
1784       b)   Shutter:   Providing   of   57mm   thick   asbestos   free   composite, 'TUFWUD' brand - 3 criteria  - fire, heat  and smoke  check Lead  Lined Door   Shutter   with   flame   guard   of   120   minutes   IS3614   part   -II comprising   of   2x9mm   Calcium   Silicate   boards,   Chemical   treated internal timber with Fire retardant chemicals in pressure impregnation vessels  under  160  PSI  pressure  as  per  IS:401and  kiln  seasoned  to moisture  below  15%  as  per  IS:1141  frame  work  of  100x30  mm  with 30mm  thick  infill  of  ceramic  fibre  (density  128  Kgs/CMT)  vermiculite mix, 3mm thick Lead Sheet on  one side  faced &  3mm Fire  retardant High  Density  Fibreboard,  internally  lipped  with  hardwood  beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame®  intumescent strip  (imported) of  size 10mmx4mm  concealed  for  fire  and  smoke  sealing  in  the  grooves  in the shutter on all edges except bottom, without any external lipping.   SQM 16790.70 1093.00
  Door and Windows 50.84 BD-T Providing of Tufwud make Lead Lined Door system with 120x60  mm Hardwood Frames, interlayered with 3mm lead and 44mm Solid core flush  door  shutters  conforming  to  the  I.S.  specification  2202-1991 (specification   for   wooden   flush   door   shutter   –   solid   core   type), interlayered   with   3mm   lead   with   prior   approval   of   concerned Superitending Engineer. As directed by Engineer-in-charge      
1785       a)  Door  Frame:  Providing  Frames  for  Lead  Lined  door  shutters  1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure  as  per  IS:401  and  kiln  seasoned  to  moisture  below  15%  as per  IS:1141  of  section  120  X  70  mm  with  45mm  thick  two  layered 3mm  Lead  Line  Sheets  being  overlapped  from  either  side,  spray quoted  with  2  coats  of  Enamel  paint  after  one  coat  of  white  wood primer  of  minimum  200  micron  etc.  complete  as  per  direction  of Engineer  in  Charge.  with  prior  approval  of  concerned  Superitending Engineer.   RMT 1875.80 485.00
1786       b) Shutter: Supplying of 'TUFWUD' brand 44mm Solid core flush door shutters  conforming to  the I.S. specification 2202-1991  (specification for  wooden  flush  door  shutter  –  solid  core  type).  32mm  Wooden structure of 1st class Hardwood or Pinewood of at least 50mm width, top and bottom rails of 75mm width, with filler material without any gap  of  1st  Class  Hardwood,  or  pine  wood,  all  chemically  treated  for termite and borer resistance as per IS 401:2001 under minimum 150 PSI   pressure,   and   seasoned   as   per   IS   1141:   1993   upto   desired moisture  level  as  per  IS  287,  with  one  side  3mm  HDF  &  other  side 3mm lead & 6mm BWP ply; all hot-pressed with Phenol Formaldehyde resin,   internally   lipped   with   hardwood   beading,   and   pasted   in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of  enamel  paint  of  minimum  300  micron.  with  prior  approval  of concerned Superitending Engineer.   SQM 13564.60 639.00
1787 er supply and sani 50.85 BD-V Providing  and  fixing  Ductile  iron  Man  Hole  Covers/  Strom  Water Grating and Grating with frame of Various sizes, weight and types and load  bearing  capacity  as  per  EN-124,  equivalent  NECO   with  prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge Kg 150.00 15.00
  er supply and sani 50.86 BD-V Supplying    installation    testing    and    commissoning    of    Hubless centrifugally  cast  iron  pipes  as  per  ISI  15905  equivalent  to  NECO inclusive of all  necessary special  fitting like bends, tees, and caps, 'Y' bends for cleaning offsets, junctions, cowls, etc. lad under floor/fixed on  walls  and  in  pipe  shafts  etc.  complete.  The  quoted  rate  should include lead and lifting charges to all levels, necessary scaffolding and supports  like  hanger  supports  grip  bolts  and  CV  sheet  304  grade clamps etc. with prior approval of concerned Superitending Engineer. As directed by Engineer-in-charge      
1788   a   a) 50 mm dia   Rmt 1100.00 110.00
1789   b   b) 65 mm dia   Rmt 1280.00 128.00
1790   c   c) 75 mm dia   Rmt 1380.00 138.00
1791   d   d) 100 mm dia   Rmt 1600.00 160.00
1792   e   e) 150 mm dia   Rmt 2850.00 285.00
1793   f   f) 200 mm dia   Rmt 4750.00 285.00
        SSR 2019-20 Additional New items        
  BUILDING WORKS            
1794 Accoustic 51.01   Providing & Fixing in position, Acoustical Panelling made from  Fabric wrapped Compressed polyester fibre nonwoven 9 mm  panels on, 50 x 50 mm sal-wood frame of 600 x  600 c  to  c  having wooden  supports from wall of required length, in front of 1000 gsm synthetic wool  50 mm  thick  with  chicken  mesh  on wall  side, including  cost of  required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 4590 1375
1795 Accoustic 51.02   Providing & Fixing in position, Acoustical  Panelling made from Wood- wool board 20mm  on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm  synthetic  wool  50  mm  thick  with  chicken  mesh  on  wall  side, including  cost  of  required  Cut-Outs,  decorative  mouldings  /  finishing- items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions   &   Complete   in   all   aspects.   including   all   materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 3430 1025
1796 Accoustic 51.03   Providing & Fixing in position, Acoustical Panelling made from Gypsum plain 12mm panels on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm  synthetic  wool  50  mm  thick  with  chicken  mesh  on  wall  side, including  cost  of  required  Cut-Outs,  decorative  mouldings  /  finishing- items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions   &   Complete   in   all   aspects.    including   all   materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 2300 690
1797 Accoustic 51.04   Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate  on, 50 x  50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on   wall   side,   including   cost   of   required   Cut-Outs,   decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 5090 1500
1798 Accoustic 51.05   Providing &  Fixing in position Acoustical  Doors  along with 150 x  150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.)  4 no each leaf,  with Door-closer (Dorma / Geze or eq.)  including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish   &   Scaffolding   as   per   Architectural   &   Acoustical   Design   & Instructions   &   Complete   in   all   aspects   .including   all   materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 23700 7100
1799 Accoustic 51.06   Providing   &   fixing   in   position   Stage   flooring   Made   from   18mm plywood  1200  x  2400  &  18mm  Teakwood  planks  100  x  800  having tongue &  grove  on Sal-wood  frame of  50 x  100  at  600mm c  to  c  on stage   surface   including   cost   of   required   Cut-Outs,   decorative mouldings   /   finishing-items   /   polish   etc.,   as   per   Architectural   & Acoustical Design & Instructions & Complete in all aspects.  .including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 8215 2460
1800 Accoustic 51.07   Providing &  Fixing in position,  Acoustical  Ceiling  made from  Gypsum Plain Panels on approved heavy duty G.I. frame ceiling channels at 450 c to c, & intermediate channels not more than 1200 c to c, along with ply wood forms  suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural  &  Acoustical  Design  &  Instructions  &  Complete  in  all aspects.including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 1465 430
1801 Accoustic 51.08   Providing   &   Fixing   in   position,   Acoustical   Ceiling   made   from Compressed  polyester  fibre  nonwoven  9mm   panels   on  approved heavy duty GI frame 300 mm c to c & intermediate channels at 1200 mm  c  to  c,   suspended  with  Hangers  from  Roof,  including  cost  of required    Cut-Outs,    decorative    mouldings    /    finishing-items    & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete  in  all  aspects  including  all  materials  labour,finishing  etc complete As directed by Engineer-in-charge Sqm 2865 850
1802 Accoustic 51.09   Providing &  Fixing in position, Acoustical  Ceiling made from Rigitone 8/18  perforated  panels  on  approved  heavy  duty  G.I.  frame,  ceiling channels at 300 c to c, & intermediate channels not more than 1200 c to  c,  suspended  with  Hangers  from  Roof,  in  front  of  1000  Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut- Outs,  decorative  mouldings  /  finishing-items  &  Scaffolding,  as  per Architectural  &  Acoustical  Design  &  Instructions  &  Complete  in  all aspects including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 4135 1200
1803 Accoustic 51.10   Providing & Fixing in position, Acoustical Panelling made from 12mm thick Agro wood strips of 50, 75 7 100 mm width on 50 x 50 mm Sal- wood frame of 600 x 600 c to c having supports from wall of required length,   in   front   of   1000   gsm   synthetic   wool   50   mm   thick   with approved coloured fabric on strips side &  chicken mesh on wall side, including  cost  of  required  Cut-Outs,  decorative  mouldings  /  finishing- items   /   Melamine   Polish   &   Scaffolding,   as   per   Architectural   & Acoustical  Design &  Instructions  &  Complete in all  aspects.  including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 5075 1500
1804 Accoustic 51.11   Providing &  Fixing in position, Fabric  wrapped Compressed polyester fibre nonwoven 9mm  panels above the wood wool board panelling or existing   sal   wood   frame,   using   adhesive,   as   per   Architectural   & Acoustical Design & Instructions & Complete in all aspects.  including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 2950 875
1805 Accoustic 51.12   Providing  &  Fixing  in  position,   Partition  made  from  12mm  thick Gypsum from both sides on 50 x 50 mm Sal-wood frame of 600 x 600 c  to  c,  having   of  800  gsm  synthetic  wool  50  mm  thick  in  between, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 2524 750
1806 Accoustic 51.13   Providing  &  Fixing  in  position,  Carpet   more  than  800+  gsm,  made with100%  stain  proof  fibres  of  approved  make  along  with  5mm underlay  as  per  Architectural  &  Acoustical  Design  &  Instructions  & Complete  in  all  aspects   including  all  materials  labour,finishing  etc
complete
As directed by Engineer-in-charge Sqm 1450 435
1807 Accoustic 51.14   Providing  &  Fixing  in  position,  1000  mm  wide  Auto-glow  Aluminium extruded  strips  on  auditorium  steps  as  per  Design  &  Instructions  & Complete in all aspects.  Make Piccolo or Nexus As directed by Engineer-in-charge No. 1410 420
1808 Accoustic 51.15   Providing & Fixing in position, 12mm wp Ply wood & 1.5mm laminate panels above the fabricated frame on one side , as per Architectural & Acoustical  Design &  Instructions  &  Complete in all  aspects.  including all materials labour,finishing etc complete As directed by Engineer-in-charge Sqm 3170 950
1809 Accoustic 51.16   Providing  &  Fixing  in  position,  MS  fabrication  work  using  angles,  sqr tubes,  c  channels  etc   for  various  partition   frame  as  per  Design  & Instructions   &   Complete   in   all   aspects   .   including   all   materials
labour,finishing etc complete
As directed by Engineer-in-charge Kg 85 25
1810 Accoustic 51.17   Providing  &  Fixing  in  position,  Under  Deck  insulation  for  metal  deck
using 1000 Gsm synthetic wool with  fixed to deck using adhesive and chicken mesh.
As directed by Engineer-in-charge 220 740 220
1811 Accoustic 51.18   Providing & fixing in position, heavy duty fully upholstered Auditorium chairs 520 mm c to c tip-up type. Height of back should be less  than 1030  mm  with  plastic  protective  cover  on  back  and  bottom  having teak wood handles. Back to back distance is 1000mm. The auditorium chairs should be of following specifications   1. Powder Coated Heavy duty MS Stand.  2. Individually moulded , ergonomically designed  seat and back cushions. 3.Moulded Polyurethane Foam cushion. PU foam density    48    –    52    kgs/cu.mtr  4. Moulded    Polyurethane    Foam manufactured  in  certified  ISO  9001  facility   to  ensure  consistency  in density   for   longevity   .5.Upholstered   in   Foam   laminated   stretch sandwich Fabric  for clean finish and soft comfortable  feel  as  per  the colour &  pattern selected by the client. 6.Seat and Back  should have moulded synthetic protective cover. 7. Wooden or PU armrest  65mm x 20mm  - 330mm  long . 8.Mounted using Anchor fasteners. As directed by Engineer-in-charge No. 6000 1800
1812 Accoustic 51.19   Providing  and  Fixing  Rollar  Blinds  AMI  Make  or  approved  make  & shade  of  38mm  round  Aluminium  channel  with  Blackout  fabric  & telting with chain (Ball)  system with  all  necessary  fixtures  and  fitting etc.   complete.   (Sample   to   be   final   by   Engineer   In-charge   prior execution of work) As directed by Engineer-in-charge Sqm 2152 645
1813 Accoustic 51.20   Providing  and  Fixing  Vertical  Blinds  of  approved  Make  and  shade  of 100mm  regular  fabric  with  powder  coated  aluminium  channel  with telting  PVC  chain  &  bottom  weight  plate  with  all  necessary  fixtures and  fitting  etc.  complete.  (Sample  to  be  final  by  Engineer  In-charge prior execution of work) As directed by Engineer-in-charge Sqm 1025.00 300.00
1814 Furniture 51.21   Executive's  Table @ 1800Lx900Dx750HT
Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to  be made of   Membrane finish with soft water fall  edges &  curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as  per drawing
As directed by Engineer-in-charge No. 17231.00 ---
1815 Furniture 51.22   Pedestal Unit @ 420Lx450Dx650HT
Providing  &  Fixing  of  PEDESTAL  @  420Lx450Dx650HT  :-  To  be  made out of Complete Membrane consist of three Drawers as per drawing.
As directed by Engineer-in-charge No. 9004.00 ---
1816 Furniture 51.23   Credestal @ 1200Lx450Lx650HT
Providing  &  Fixing  of  LOW  HEIGHT  CREDESTAL  @  1200L  X  450D  X 650H  :- To be made out of Membrane Finish ( 2 Openable Shutter & 3
As directed by Engineer-in-charge No. 17498.00 ---
1817 Furniture 51.24   Executive   Table   @   2250Lx2100Dx750HT   including   Low   Height Credestal @ 1200Lx450Dx650HT
Providing  &  Fixing  of  Table   @  2250Lx2100Dx750HT  TOP  &  GABLE END  to  be  made  of   Membrane  finish  with  soft  water  fall  edges  & curved  panel  &  Decorated  Anodized  section  MODESTY  PANEL  to  be made  of  18  mm  thick  Prelaminated  particle  board  with  PVC  edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H  :- To be made
out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing.
As directed by Engineer-in-charge No. 42635.00 ---
1818 Furniture 51.25   Medium Height Partition @ 1800/1200HT
TILE   BASED   PARTITION   SYSTEM:-    Tile   based   Aluminum   partition system  of  1800/1200  mm  ht.  made  of  60mm  thk  aluminum  frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom  of  partition  and  other  immediately  below  of  work  top  with hook  on  type  raceway  cover  for  easy  access  of  wires.  Frames  to  be joined by aluminum connectors with M6 x 16 pan-head machin screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be in  anodized  finish.  The  top/  exposed  sides  of  the  frame  and  posts should  be  covered  with  horizontal/  Vertical  trim  and  caps  made  of Aluminum in anodized finish in order to  enhance its  look.Upper tiles of  partition  to  be  in  Soft  Board  or  Marker  tile  of  9mm.  thk.,  and prelaminated partical board lower tiles in laminate finish of 9mm. thk. on both the sides.
As directed by Engineer-in-charge No. 7552.00 ---
1819 Furniture 51.26   Free Standing Table @ 1500Lx600Dx750HT
Providing  and  fixing  Table  of  Size  1500  x  600  x  750  mm.  Top:  made from 25 mm Prelaminated Particle board.    All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Legs  :  C  Shape  made  from  CRCA  Sheet  with  Powder  Coat  finish. Modesty  panel  :  Made  from  18mm  both  side  prelaminated  particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt  glue  applied  by  auto  edge  banding  machine.KEYBOARD  TRAY  ( WITHOUT MOUSE TRAY ) :-  Metal Powder Coated - Black Color, CPU TROLLEY :-  Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x  450D x  680Ht. mm. with central  lock and  key.  Drawers  and  body  are  complete  metal  with  powder  coat finish, facia in 18 mm prelaminated particle board,
As directed by Engineer-in-charge No. 16893 ---
1820 Furniture 51.27   Free Standing Table @ 1350Lx600Dx750HT
Providing  and  fixing  Table  of  Size  1350  x  600  x  750  mm.  Top:  made from 25 mm Prelaminated Particle board.    All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Legs  :  C  Shape  made  from  CRCA  Sheet  with  Powder  Coat  finish. Modesty  panel  :  Made  from  18mm  both  side  prelaminated  particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt  glue  applied  by  auto  edge  banding  machine.KEYBOARD  TRAY  ( WITHOUT MOUSE TRAY ) :-  Metal Powder Coated - Black Color, CPU TROLLEY :-  Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x  450D x  680Ht. mm. with central  lock and  key.  Drawers  and  body  are  complete  metal  with  powder  coat finish, facia in 18 mm prelaminated particle board,
As directed by Engineer-in-charge No. 16411 ---
1821 Furniture 51.28   Free Standing Table @ 1200Lx600Dx750HT
Providing  and  fixing  Table  of  Size  1200  x  600  x  750  mm.  Top:  made from 25 mm Prelaminated Particle board.    All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Legs  :  C  Shape  made  from  CRCA  Sheet  with  Powder  Coat  finish. Modesty  panel  :  Made  from  18mm  both  side  prelaminated  particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt  glue  applied  by  auto  edge  banding  machine.KEYBOARD  TRAY  ( WITHOUT MOUSE TRAY ) :-  Metal Powder Coated - Black Color, CPU TROLLEY :-  Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x  450D x  680Ht. mm. with central  lock and  key.  Drawers  and  body  are  complete  metal  with  powder  coat finish, facia in 18 mm prelaminated particle board,
As directed by Engineer-in-charge No. 14436 ---
1822 Furniture 51.29   Library Area Table @ 1350Lx750Dx750HT
Providing & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band,  BENT LEG to be CHROME FINISH as per drawing.
As directed by Engineer-in-charge No. 10897 ---
1823 Furniture 51.30   Providing         &         Fixing         Curviliner         Workstation         @ 1500/1500Lx600/600Dx750HT
Providing         &         Fixing         Curviliner         Workstation         @ 1500/1500Lx600/600Dx750HT,       Curvilinear       Table       Top       @ 1500/1500Lx600/600D    :-    TOP    to    be    made    of    25   mm    thick Prelaminated  particle  board  with  PVC  edge  band,   GABLE  END  to  be made  of  25  mm  thick  Prelaminated  particle  board  with  PVC  edge band,  KEYBOARD  TRAY  (  WITHOUT  MOUSE  TRAY  )  :-   Metal  Powder
Coated  -  Black  Color,  CPU  TROLLEY  :-   Metal  Powder  Coated  -  Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
As directed by Engineer-in-charge No. 15767 ---
1824 Furniture 51.31   Conference Table @ 3600Lx1400Dx750HT
Providing & Fixing of Main Table @ 3600Lx1400Dx750HT - made up of 18+18mm  Thick  MDF  top  with  PVC  Membrane  finish  and  waterfall edge  profile.  Aluminium  Anodizied  finish  beeding  of  4mm  thich  is running  all  over  the  table  top  edge.  Gable  ends  is  Aerofoiled  Shape with  front  edges  in  PVC  Membrane  finish  and  rest  in  Prelaminated MDF with batton structure. Gable ends should be hollow from inside for  the  provision  of  passing  electrical  and  Data  wiring.  ,  MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band
Access Flap:- For Wire manager 2 Nos.
As directed by Engineer-in-charge No. 99105 ---
1825 Furniture 51.32   Conference Table @ 1800 x 900 x 750 mm Ht.
Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up of 18+18mm  Thick  MDF  top  with  PVC  Membrane  finish  and  waterfall edge  profile.  Aluminium  Anodizied  finish  beeding  of  4mm  thich  is running  all  over  the  table  top  edge.  Gable  ends  is  Aerofoiled  Shape with  front  edges  in  PVC  Membrane  finish  and  rest  in  Prelaminated MDF with batton structure. Gable ends should be hollow from inside for  the  provision  of  passing  electrical  and  Data  wiring.  ,  MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band
Access Flap:- For Wire manager 1 Nos.
As directed by Engineer-in-charge No. 21108 ---
1826 Furniture 51.33   12 Seater Reading Table for Library @ 3600Lx1200Dx750HT  Providing   and   Fixing   12   Seater   Reading   Table   for   Liberary   @ 3600Lx1200Dx750HT  Top:  made  from  25  mm  Prelaminated  Particle board.  All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.
Gable  Ends  :  made  from  25  mm  Prelaminated  Particle  board.   All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue  applied  by  auto  edge  banding  machine.  Modesty  panel  :  Made from  18mm  both  side  prelaminated  particle  boards.All  edges  are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.
As directed by Engineer-in-charge No. 29536 ---
1827 Furniture 51.34   3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.
3 DRAWER  PEDESTAL  UNIT  having  overall  size  392L  x  450D  x  680Ht. mm.  with  central  lock  and  key.  3  Drawers  and  body  are  complete metal  with  powder coat  finish, facia  in 18  mm prelaminated  particle board.
As directed by Engineer-in-charge No. 8108 ---
1828 Furniture 51.35   Low Height Openable Storage @ 900Lx450x750HT
Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in  0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing
As directed by Engineer-in-charge No. 12646 ---
1829 Furniture 51.36   Medium Height Steel Storage @ 750Lx450Dx1200HT
Providing  and  fixing  Openable  Steel  Storage  of  750  x  450  x  1200Ht, with 2 adjustable shelves, Complete body & shutter made in  0.8 mm thick  &  Top  in  2  mm  thick  CRCA,  2  Shutter  to  be  mounted  with  the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing.
As directed by Engineer-in-charge No. 15452 ---
1830 Furniture 51.37   Full Height Steel Storage @ 750Lx450Dx2100HT
Providing  and  fixing  Openable  Steel  Storage  of  750  x  450  x  2100Ht, with 4 adjustable shelves, Complete body & shutter made in  0.8 mm thick &  Top   in  2 mm  thick CRCA,  4 Shutter  to  be  mounted with  the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.
As directed by Engineer-in-charge No. 18925 ---
1831 Furniture 51.38   Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. As directed by Engineer-in-charge No. 43427 ---
1832 Furniture 51.39   Book Case with Glass Shutter @ 825Lx300Dx1650HT
Providing    &    Fixing    of    Book    Case    with    Glass    Shutter    @ 825Lx300Dx1650HT:- To  be made out of complete body & in 0.7mm thick  CRCA  &  Shutter  in  1.2mm  thick  CRCA  with  glass  pannel  in Powder coating finish as per drawing.
As directed by Engineer-in-charge No. 26727 ---
1833 Furniture 51.40   Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple    Locking,    Adjustable    Armrest,    Gaslift    for    Seat    height adjustment,    Standard    5-prong    P/Nylon    Base     with    Leatherite Upholstery As directed by Engineer-in-charge No. 17371 ---
1834 Furniture 51.41   Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING,   HIGH   DENSITY   CUSHION   ON   SEAT   COMPOSITE LEATHER   WITH  METALLIC   SILVER   FINISH  BASE   AND  ARMS   WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. As directed by Engineer-in-charge No. 15474 ---
1835 Furniture 51.42   Providing  &  Arrangemnt  of  MId  Back,  Normal  Syncro   Mechanism  , Fixed   Armrest   ,   Gaslift   for   Seat   height   adjustment,   Standard   5- prong/Nylon Base with Leather Upholstery As directed by Engineer-in-charge No. 9563 ---
1836 Furniture 51.43   Providing  &  Arrangemnt  of  Mid  Back,  ECO  CTS  Mechanism  ,  Fixed Armrest   ,   Gaslift   for   Seat   height   adjustment,   Standard   5-prong P/Nylon Base with Fabric Upholstery As directed by Engineer-in-charge No. 6520 ---
1837 Furniture 51.44   Public Seating Chair. - 3 Seater
Providing  and  Fixing  3  seater  Public  seating  chair  made  of  complete metal  with  Legs  in  Crome  finish  and  seates  in  silver  powder  coating finish.
As directed by Engineer-in-charge No. 18056 ---
1838 Furniture 51.45   Double Faced Mobile Unit for Compactor 2150mmH x 2745mmW x 900mmD
Providing   and   fixing   Double   Faced   Mobile   Unit   for   Compactor 2150mmH x 2745mmW x 900mmD  - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves.
As directed by Engineer-in-charge No. 135808 ---
        DRIVE  COVER  PANEL  :  Made  out  of  22SWG  thick  C.  R.C.  A.  prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION
:  The  Centre  partition  will  comprise  of  a  full  C.R.C.A.  prime  quality Mild  Steel  22SWG  Sheet.  LOCKING   :   System  will  be  provided  with individual  rack locking  as  well  as  centralised  locking arrangement  on the  last  unit  when  all  units  are  brought  together,   central  lock  when operated  gets  locked  with  the  floor  &  does  not  allow  access  to  the units.  DRIVE  MECHANISM   :   Driving  Mechanism   will  be  provided externally  supported  on  special  grade  anti-friction  bearing  to  have smooth & effortless movement. Entire mechanism or gear & sprockets shall  be  incorporated  within the  front panel  provided in  the front  of the  unit  within  an  area  of  1000mm  x  200mm  x  60mm.   DRIVING WHEEL  :  Fully  Powder  Coated  three  pronged  drive  wheel  for  better torque  &  free  movement  of  the  rack  over  the  guide  rail.  INDEXING ARRANGEMENT : Acrylic  card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).
       
1839 Furniture 51.46   Single  Faced  Mobile  Unit  for  Compactor  2150mmH  x  2745mmW  x 457mmD
Providing   and   fixing   Single   Faced   Mobile   Unit   for   Compactor 2150mmH x 2745mmW x 457mmD  - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The
As directed by Engineer-in-charge No. 99768 ---
        Centre  partition  will  comprise  of  a  full  C.R.C.A.  prime  quality  Mild Steel   22SWG   Sheet.   LOCKING    :    System   will   be   provided   with individual rack locking as well as centralised locking  arrangement on the  last  unit  when  all  units  are  brought  together,   central  lock  when operated  gets  locked  with  the  floor  &  does  not  allow  access  to  the units.  DRIVE  MECHANISM   :   Driving  Mechanism   will  be  provided externally  supported  on  special  grade  anti-friction  bearing  to  have smooth & effortless movement. Entire mechanism or gear & sprockets shall  be  incorporated  within the  front panel  provided in  the front  of the  unit  within  an  area  of  1000mm  x  200mm  x  60mm.   DRIVING WHEEL  :  Fully  Powder  Coated  three  pronged  drive  wheel  for  better torque  &  free  movement  of  the  rack  over  the  guide  rail.  INDEXING ARRANGEMENT : Acrylic  card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).        
1840 Furniture 51.47   Single  Faced  Fixed  Unit  for  Compactor  2150mmH  x  2745mmW  x 457mmD
Providing and fixing Single Faced Fixed Unit for Compactor 2150mmH x   2745mmW  x   457mmD    -   BASE   FRAME   :   Base   Frame  shall   be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves. DRIVE COVER PANEL : Made
As directed by Engineer-in-charge No. 64014 ---
        out of 22SWG  thick C. R.C. A. prime quality Steel to  cover the entire drive  mechanism.  CENTRE   PARTITION   :   The  Centre  partition  will comprise  of  a  full  C.R.C.A.  prime  quality  Mild  Steel  22SWG  Sheet. LOCKING   :   System  will  be  provided   with  individual  rack  locking  as well as centralised locking arrangement on the last unit when all units are  brought  together,   central  lock  when  operated  gets  locked  with the floor & does not allow access to the units. DRIVE MECHANISM  : Driving  Mechanism   will  be  provided  externally  supported on  special grade  anti-friction  bearing  to  have  smooth  &  effortless  movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000mm x  200mm  x  60mm.   DRIVING  WHEEL  :  Fully  Powder  Coated  three pronged drive wheel  for better  torque &  free movement  of the  rack over  the  guide  rail.  INDEXING  ARRANGEMENT  :  Acrylic   card  holders provided on the front panel for  easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).        
1841 Furniture 51.48   Double Faced Mobile Unit for Compactor 2150mmH x 1830mmW x 900mmD
Providing   and   fixing   Double   Faced   Mobile   Unit   for   Compactor 2150mmH x 1830mmW x 900mmD  - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a  full  C.R.C.A.  prime  quality  Mild  Steel  22SWG  Sheet.  LOCKING   : System will be provided
As directed by Engineer-in-charge No. 95652 ---
        with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together,  central lock when operated  gets  locked  with  the  floor  &  does  not  allow  access  to  the units.  DRIVE  MECHANISM   :   Driving  Mechanism   will  be  provided externally  supported  on  special  grade  anti-friction  bearing  to  have smooth & effortless movement. Entire mechanism or gear & sprockets shall  be  incorporated  within the  front panel  provided in  the front  of the  unit  within  an  area  of  1000mm  x  200mm  x  60mm.   DRIVING WHEEL  :  Fully  Powder  Coated  three  pronged  drive  wheel  for  better torque  &  free  movement  of  the  rack  over  the  guide  rail.  INDEXING ARRANGEMENT : Acrylic  card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).        
1842 Furniture 51.49   Single  Faced  Mobile  Unit  for  Compactor  2150mmH  x  1830mmW  x 457mmD
Providing   and   fixing   Single   Faced   Mobile   Unit   for   Compactor 2150mmH x 1830mmW x 457mmD  - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The
As directed by Engineer-in-charge No. 69900 ---
        Centre  partition  will  comprise  of  a  full  C.R.C.A.  prime  quality  Mild Steel   22SWG   Sheet.   LOCKING    :    System   will   be   provided   with individual  rack locking  as  well  as  centralised  locking arrangement  on the  last  unit  when  all  units  are  brought  together,   central  lock  when operated  gets  locked  with  the  floor  &  does  not  allow  access  to  the units.  DRIVE  MECHANISM   :   Driving  Mechanism   will  be  provided externally  supported  on  special  grade  anti-friction  bearing  to  have smooth & effortless movement. Entire mechanism or gear & sprockets shall  be  incorporated  within the  front panel  provided in  the front  of the  unit  within  an  area  of  1000mm  x  200mm  x  60mm.   DRIVING WHEEL  :  Fully  Powder  Coated  three  pronged  drive  wheel  for  better torque  &  free  movement  of  the  rack  over  the  guide  rail.  INDEXING ARRANGEMENT : Acrylic  card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).        
1843 Furniture 51.50   Single  Faced  Fixed  Unit  for  Compactor  2150mmH  x  1830mmW  x 457mmD
Providing and fixing Single Faced Fixed Unit for Compactor 2150mmH x   1830mmW  x   457mmD    -   BASE   FRAME   :   Base   Frame  shall   be fabricated in channel Type from minimum 2.5 mm thick MS Sheet Size of Channel  25mm x 100mm x 45mm.
GUIDE  RAILS  :  The guide rails  shall  be made out of 28mm Bright bar placed on 1.2 mm thick M.S. Plate which will be above the floor and are as per the international standard of safety.
SUPER STRUCTURE : Super structure of the Mobile storage system will consist  of  knock  down  type  panels.   All  the  components  such  as shelves,  front  panel,  end  panel,  vertical  rear  panel,  central  partition etc.  Will  act  as  an  integral  member  of  the  Unit.  SHELVES  :  Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10  folds each will be  provided   each  designed  to  carry  a  U.D.L.  of  70  kgs.  VERTICAL PANEL :  Vertical panel consists of the front, Centre & rear panel shall be  made  out  of  20SWG  thick  C.R.C.A.  Prime  quality  Mild  Steel  & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality
As directed by Engineer-in-charge No. 44223 ---
        Mild  Steel  22SWG  Sheet.  LOCKING   :   System  will  be  provided  with individual  rack locking  as  well  as  centralised  locking arrangement  on the  last  unit  when  all  units  are  brought  together,   central  lock  when operated  gets  locked  with  the  floor  &  does  not  allow  access  to  the units.  DRIVE  MECHANISM   :   Driving  Mechanism   will  be  provided externally  supported  on  special  grade  anti-friction  bearing  to  have smooth & effortless movement. Entire mechanism or gear & sprockets shall  be  incorporated  within the  front panel  provided in  the front  of the  unit  within  an  area  of  1000mm  x  200mm  x  60mm.   DRIVING WHEEL  :  Fully  Powder  Coated  three  pronged  drive  wheel  for  better torque  &  free  movement  of  the  rack  over  the  guide  rail.  INDEXING ARRANGEMENT : Acrylic  card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).        
1844 Furniture 51.51   Stool for Lab and Class-IV
Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer  dimension  MS  Pipe,  Duly  painted,  With  a  304  Grade  Stainless steel  12  inch  wide  seat  with a  1 inch  collar, Height  adjustment via  a screw.  as  per  design  and  drawing  and  instructions  of  Engineer  in charge.
As directed by Engineer-in-charge No. 2617 ---
1845 Furniture 51.52   Alluminium foldable ladder for store
Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht.
As directed by Engineer-in-charge No. 3961 ---
1846 Furniture 51.53   Sofa Set 3+1+1
Providing   &   fixing    Sofa   Set   3+1+1   Brown   and   Cream   leather DIMENSION  Length:  182.5  (cms)   Breadth  (cms):  100  (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat
As directed by Engineer-in-charge No. 39612 ---
1847 Furniture 51.54   Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing  And  Fixing  Of  Tea  Table  900mm  X  750mm  X  450mm  With 12mm  Thick  Colour  Eitched  Tempered  Glass  With  Bevelled  Drawing Made Out  Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. As directed by Engineer-in-charge No. 11123 ---
1848 Furniture 51.55   Single Bed @ 2025LX 1000DX 650H
Providing  and  fixing  Single  Bed  of  Size  2025Lx1000Dx650H    with matress  and  pillow.                               Understructure:  -  The  legs  are made  of  Square  tube  of  size  25  x  25mm  made  out  of  MS  with  a thickness of 1.2 mm. The legs should have corner brackets welded to it  at  two  levels.  The  corner  brackets  are  made  of  2mm  thick  CRCA having a L shaped structure to join the side panels and headboard to the  leg.  Three  nos.  of  Horizontal  stiffeners  are  provided  at  equal intervals. The  stiffeners  are  made of  Square tube  of size  25 x  25mm made  out  of  MS  with  a  thickness  of  1.2mm.  The  middle  Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness   of   1.2mm.   All   Metal   components   to   undergo   7   tank treatment  process  and  should  be  powder  coated  to  the thickness  of minimum 50 Microns DFT.
As directed by Engineer-in-charge No. 19367 ---
        Side  Panel:  -  The  side  panels  are  made  up  of  18mm  thick  Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board   Baton   running   for   required   length   to   add   rigidity   to   the structure.
Head  Board  :-  The  head  board  is  made  up  of  18mm  thick  Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm.
Foot  Board  :-  The  foot  board  is  made  up  of  18mm  thick  Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.
Bed Base:  - The Bed Base is  made up of 12mm thick Prelam  Particle Board with both side White laminate.
       
1849 Furniture 51.56   Dressing Table @400LX 400DX 1800H
Providing  &  Fixing  Dressing  Table  of  size  400LX  400DX  1800H.The Dressing  table  unit  is  made  up  of  18mm  thick  Prelam  Particle  Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has  a  mirror of 4mm thick pasted on 18mm  thick prelm  particle  board  attached  to  the  base  unit.  The  mirror  size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker.
As directed by Engineer-in-charge No. 17352 ---
1850 Furniture 51.57   Wardrobe with Mirror @ 900LX 600DX 1965H
Providing  and  Fixing  Wardrobe  with  Mirror  of  size  900LX  600DX 1965H    The  wardrobe  side  panels  and  doors  are  made  up  of  18mm thick  Prelam  Particle  Board  with  both  side  decorative  laminate.  All exposed  edges  are  sealed  with  2mm  thick  PVC  edge  Banding.  The shelves   are   made   of   18mm   thick   Prelam   Particle   Board   with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges  of  the top  are sealed  with 2mm  thick PVC   edge   Banding.   The  top   most  part   of  the   wardrobe  has   an aluminum  hanger  rod  of  EBCO  make.  One  drawer  of  size  400(W)  x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered.   The   drawer   will   have   a   multipurpose   lock   of   EBCO premium  make.  The  wardrobe  handles  are  Satin  SS  finish of  160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.
As directed by Engineer-in-charge No. 40389 ---
1851 Furniture 51.58   Bed Side Table @ 400LX 400DX 415H
Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is  made up of 18mm thick Prelam Particle  Board with  both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding
As directed by Engineer-in-charge No. 6401 ---
1852 Furniture 51.59   Kitchen Trolley
Providing  and  Fixing  stainless  steel  kitchen  trolley  of  overall  26  " height  and  22"  depth,supported  on  aluminium  pipes  ,trolley  basket made out of 5 mm stainless steel rod fitted on telescopic channel  of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40 kg load bearing capacity of trolley made out of 20 mm PUC   coated   plywood   and   colour   combination   as   directed   by   E-I- C.Inner side of panel  covered by white mica ,100  mm s.s. decorative handle.(The  width  and  height  of  individual  compartments  shall  be kept as directed by Engineer-in-charge)
As directed by Engineer-in-charge Rmt 1500 ---
1853 Doors and windows 51.60   Solid Core Flush door Single leaf
Providing and fixing factory made solid  core flush door in single leaf 35  mm  thick,  decorative  types,  of  exterior  grade,  as  per  detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers  on  both  faces  with/without  glazing  and  venetians  in  the positions shown on the drawings or as directed, all necessary  beads, moulding  and  lipping,    holdfasts,  mat  finish  stainless  steel  fixtures fastenings , finishing with french-polish/ waxing complete. (without
As directed by Engineer-in-charge Sqm 2750 ---
1854 Doors and windows 51.61 BDR Solid Core Flush door Double leaf
Providing  and  fixing  factory  made  solid  core  flush  door  shutters  in double  leaves  35mm  thick,decorative  type  of  exterior  grade,  as  per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved  face  veneers  on  both  sides,  without  glazing  and  venetians including  mat  finish  stainless  steel   fixtures  and  fastening,  stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to  be  got  approved  from  Ex.  Engineer  before  use)  Commercial  Hard Wood shutter
As directed by Engineer-in-charge Sqm 3100 ---
1855 Plastering 51.62 BDL Providing Silica  plaster plaster externally in two coats  in all  positions including base coat of 8 to 10 mm thick curing the same for not less than two days and keeping the surface of base coat rough to receive the  final  coat  treatment  5  to  7  mm  thick  .finishing  the  surface  by taking   out   grains   and   curing   for   8   to   10   daysscaffolding   etc complete.(The silica plast material shall contain 53 grade OPC cement with pozzolanic materials .size of agreegates shall be of 3 mm having 1:3 proportion with cement. As directed by Engineer-in-charge Sqm 560 331
1856 PWD persons 51.63 BDV Providing and Fixing toilet set for differently Abled persons consist of Floor  Mounted  white  vitreous  china  water  Closet  including  6  litre capacity  white  vitreous  china  flushing  Cistern  with  raised  soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms  all including  cutting  and  making  good  the  walls  and  floors  wherever required  ,seat  cover,  cistern  &  wash  basin  fittings,nuts,  bolts  and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge. As directed by Engineer-in-charge Sqm 70780 21000
1857 PWD persons 51.64 BDT Providing  and  fixing  ISI  marked  double  swing  flush  door  shutters conforming  to  IS  :2202  (Part  I)  Non-decorative  type,  core  of  block board  construction  with  frame  of  1st  class  hard  wood  and  well matched teak 3 ply veneering with vertical grains or cross bands and face  veneers  on  both  faces  of  shutters.  30  mm  thick  including  ISI marked  Stainless  Steel  L-  hinges  with  necessary  screws  Fittings  & Fixtures  per leaf
SS kick plates on both sides of the door of 300mm height
Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size)
-4 nos. SS finished  lever handle with mortise lock- 1 no.
Floor  spring-  1  No.  100mm  x  100mm  safety  glass  at  the  specified location
As directed by Engineer-in-charge Sqm 12500 3750
1858 PWD persons 51.65   Providing  and  applying  blue  and  white  coloured  thermoplastic  road marking  paints  for  marking  a  3ft x  3 ft  universal  accessibility  symbol within the parking bay as paer the drawings and up to the satisfaction of the engineer in charge. As directed by Engineer-in-charge No. 1575 470
1859 PWD persons 51.66   Acrylic tactile audio map
Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial   building  layout as  per the approved size,  design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille  to  be  integral  with  the  sign  face  and  be  raised  0.5mm  above base  plate.  The  map  to  be  installed  at  the  specified  location  as  per accessibility standards,  shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor   level   and   using   the   necessary   hardware   specified   by   the manufacturer and to be installed up to the satisfaction of the engineer in charge
As directed by Engineer-in-charge No. 20790 6237
1860 PWD persons 51.67 RD Directional signage
Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots)   directional   signboards   of   size   6"   x   9"    designed   as   per accessibility  standards  and  having  4mm  thick  acrylic  base  plate  with Upper  Case  San  Serif  words  made  of  white  acrylic  non  glare  cut  out letters of height 15mm raised not less  than 0.8mm above base plate and  the  equivalent  word  written  in  Hindi  with  Devnagri  non  glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction.    Each    signboard    to    be    fixed    as    per    manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge.
As directed by Engineer-in-charge No. 1633 490
1861 PWD persons 51.68   Floor Directories Providing and fixing acrylic multilingual Braille (raised dots)ADA compliant modular  floor directories system on all floors of size1.5'  x  2'  ,  showing  the  floor  plan  and  the  list  of  rooms  on  that floor, to be installed on each floor near the staircase, designed as per standards  and  having  4mm  thick  blue  acrylic  base  plate  with  Upper Case San Serif words and symbols made of white acrylic non glare cut out  letters  of  height  20mm  raised  not  less  than  0.8mm  above  base plate  and  the  equivalent  word/s  written  in  Hindi  with  Devnagri  non glare  imported  acrylic  letters  of  height  15mm  raised  not  less  than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate.  Each directory to be  fixed  as   per  manufacturers   specifications   on  the  wall   at  the approved  location  at  a  height  of  1200mm  from  FFL  and  as  per  the directions by the engineer in charge. As directed by Engineer-in-charge No. 17418 5225
1862 PWD persons 51.69   Providing an ADA compliant Disability  Service Desk  having a  lowered portion  (800mm  from  FFL)  and   leg  space  of  450  mm,  having  the approved  design  and  of  the  approved  make  as  per  manufacturers
specifications
As directed by Engineer-in-charge No. 22000 6600
1863 PWD persons 51.70   Providing and  fixing SS-304  studs  having  35mm dia.  of the  approved brand and make inside the building on all floors  in corridors, lobbies level  differences  etc.  as  per  accessibility  standards  and  as  per  the installation  instructions  prescribed  by  the  manufacturer,  using  the necessary  adhesive  including  finishing  work  up  to  the  satisfaction  of the engineer in charge complete. As directed by Engineer-in-charge No. 59 17
1864 PWD persons 51.71   Providing  and  fixing  SS-304  strips  of  size  280mm  x  35mm  of  the approved brand and make inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using the necessary  adhesive  including  finishing  work  up  to  the  satisfaction  of the engineer in charge complete. As directed by Engineer-in-charge No. 293 87
1865 PWD persons 51.72   Providing  and  fixing  Braille  indicators  for  handrails  of  the  approved design and make having Braille dots  raised 0.5mm above base plate, to  be  installed  at  the specified  locations  as  per the  directions  of  the
engineer in charge
As directed by Engineer-in-charge No. 1500 450
1866 PWD persons 51.73   Providing and fixing stainless steel (Grade 304) railing made of hollow tubes,   channels,   plates   etc.   including   welding   grinding,   buffing, polishing  and  making  curvature  (wherever  required)  and  fitting  the same with necessary stainless steel nuts and bolts complete, i/c fixing the   railing   with   necessary   accessories   and   stainless   steel   dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable  arrangement as  per approval of engineer in charge (for payment purpose, only the weight of  the  stainless  steel  members  shall  be  considered  excluding  fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92 kg / r. metre As directed by Engineer-in-charge Kg 694 205
1867 PWD persons 51.74   ADA    compliant    modular    Multilingual    and    tactile    Emergency evacuation  map  of  each  floor  indicating  the  current  position  of  the viewer  saying  "YOU  ARE  HERE"  of  15mm  height  letters  in  red  with white  background,  indicating  the  emergency  exits,  locations  of  fire extinguishers   etc.    Signs  shall   have  a  solid  header  with  the  text “EVACUATION  PLAN”  in  contrasting  uppercase  letters  no  less  than 3/4"  in  height.  The  size  of  the  board  shall  be  2ft  x  2ft  and  shall  be installed at a height of 1200mm from FFL  and shall be oriented to the position of the viewer as per the direction of the site engineer As directed by Engineer-in-charge No. 19750 5925
1868 PWD persons 51.75   Fire   exit   and   floor   identification   signage   as   per   manufacturer's specifications, ADA compliant and modular system As directed by Engineer-in-charge No. 7500 2250
1869 PWD persons 51.76   Supplying  and  installing  of  in  position  the  signages  "  FIRE  ORDER"  it should  contain  the  following  matter  on  3mm  thick  "Opaque"  PVC foam  board  of  computerized  cut,  PVC  Non-reflective  self  adhesive vinyle painted foam board of 3' x 4'.Product to be ADA compliant and
modular system.
As directed by Engineer-in-charge No. 19780 5934
1870 PWD persons 51.77   Providing  an  emergency  evacuation  chair  of  the  approved  design, weight and loading capacity As directed by Engineer-in-charge No. 73500 22050
1871 PWD persons 51.78   Providing  and  fixing  the  reader  of  the  approved  brand  and  make  as
per the manufacturers specifications and as per the directions of the engineer in charge
As directed by Engineer-in-charge No. 23100 6930
1872 PWD persons 51.79   Providing and fixing the transmitter of the approved brand and make on each floor as per the manufacturers  specifications and as per the directions of the engineer in charge As directed by Engineer-in-charge No. 3675 1100
1873 PWD persons 51.80   Providing and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer As directed by Engineer-in-charge No. 189 56
1874 PWD persons 51.81   Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand as per the direction of engineer in charge As directed by Engineer-in-charge Rmt 160 48
1875 PWD persons 51.82   Providing a  folding wheelchair of Pioneer Surgicals  Brand, model  no.
PS  809/  equivalent  make  as  per  the  directions  of  the  engineer  in charge.
As directed by Engineer-in-charge No. 8950 2685
1876 PWD persons 51.83   Design, supply, fabrication and fixing of SS, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/ Grade  1  Braille  (raised  dots)to  be  etched/  engraved  and  be  raised 0.5mm   above   base   plate    and   Upper   Case   San   Serif  words   and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS  hollow  square section (50mm x  50mm) as  per the  installation procedure  specified  by  the  manufacturer  and  as  per  accessibility standards and up to the satisfaction of the engineer in charge. As directed by Engineer-in-charge No. 23100 6930
1877 PWD persons 51.84   Design,  supply,  fabrication  and  fixing  of  SS,  non  glare  multilingual Braille  (raised  dots)  entrance  signage  (size  1  ft  x  1  ft)  as  per  the approved design and make,indicating the name of the building. Having 1.2mm thick SS non glare blue coloured base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri  script  of  height  15mm  in  white  colour.  Grade  2/  Grade  1 Braille  to  be  etched/  engraved  and  be  raised  0.5mm  above  base plate.The  signage  to  be  installed  at  the  specified  location  on  the compound  wall  near  the  site  entrance  gate  installed  at  a  height  of 1200  mm  from  the  finished  ground/  floor  level,  using  the  necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. As directed by Engineer-in-charge No. 5969 1791
1878 PWD persons 51.85   Providing and laying in place 300mm x 300mm x 16mm cement tactile directional  and warning  tiles  (for  a  person  with visual  impairment)of the approved brand and make and specified colour for outdoor floors such as  footpath, courtyard, multimodals  location etc. laid on 20mm thick  base  of  cement  mortar  1:4  (1  cement:  4  coarse  sand)  in  all shapes  and  patterns  including  grouting  the joints  with white  cement with matching pigments etc. complete as per direction of engineer in charge As directed by Engineer-in-charge Sqm 1550 465
1879 PWD persons 51.86   Providing  and  laying  in  place  300mm  x  300mm  x  9.8mm  vitrified tactile warning and directional tiles of the approved brand, make and colour   inside   the   buildings   at   in   all   corridors   and   lobbies,   level differences   etc.   as   per   accessibility   standards   and   as   per   the installation instructions prescribed by the manufacturer including zarri making  wherever  required  and  finishing  including  grouting the  joints with white cement with matching pigments etc. up to the satisfaction of the engineer in charge complete. As directed by Engineer-in-charge Sqm 2200 660
1880 PWD persons 51.87   Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots)  signboards  of  size  6"x  9"  for  room  titles,  designed  as  per  the drawings  issued  and  having  4mm  thick  blue  acrylic  base  plate  with Upper  Case  San  Serif  words  made  of  white  acrylic  non  glare  cut  out letters of height 15mm raised not less  than 0.8mm above base plate and  the  equivalent  word/s  written  in  Hindi  with  Devnagri  non  glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised  0.5mm  above  base  plate.Each  signboard  to  be  fixed  as  per manufacturers  specifications  on  the  wall  adjoining  the  respective room door at a height of 1200mm from FFL and as per the directions by the engineer in charge. As directed by Engineer-in-charge No. 1633 490
1881 PWD persons 51.88 BDM Providing  and  fixing  in  place  300mm  x  300mm  x  3mm  polyurethane stick on tactile directional tiles and warning tiles having beveled edges and of the approved brand, make and  colour and  conforming to  ISO 23599:  2012   inside  the  building  on  all  floors  in  corridors,  lobbies  , level  differences  as  per  accessibility  standards  and to  be installed  as per the installation instructions  given by the manufacturer using butyl rubber adhesive and the hardware specified by  the manufacturer, as per the direction of the engineer in charge complete. As directed by Engineer-in-charge No. 3545 1064
1882 PWD persons 51.89   Grab bars-Providing SS grab bars set for accessible toilets   comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set)   27a) Swing grab  bar  (1  NOS)                   Providing  a  S.S.  304  SWING  HANDICAP GRAB BAR - 700 mm and of DIA:   32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR  of IZE-600MM (H) X    600MM (D)
and 32MM DIA. and thickness  mm of the approved brand and make. 27c) Straight grab bar (2 NOS)    Providing S.STEEL 304 GRAB RAIL (600 MM),32MM  DIA.  and  thickness    1.5mm  of  the  approved  brand  and make.
As directed by Engineer-in-charge No. 19500 5850
1883 PWD persons 51.90   Providing  and  Fixing  Accessible  Wayfinding  and  navigation  signage systems  -  Providing  and  fixing  in  location  as  diected  by  Engineer  in Charge,   accessible   modular   wayfinding   and   navigational   signage system  comprising  of  ADA  and  Harmonised  Guidelines  compliant sigange  and  wayfinding  elements,  in  multilingual,  tactile  and  braille format. Sigange systems to be designed for entire building / complex under consideration As directed by Engineer-in-charge No. 85640 25692
1884 Doors and Windows 51.91 BDT Providing  &  fixing  factory-made  steel  door  of  Single  leaf  External Embossed   Wood   finish   type   with   a.)   frame   of   size  100x58   mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing  plates  and  hardware  mounting  plates  and  Polyurethane  foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre   galvanized   steel   sheet   on   both   sides   conforming   to   ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock
formed   panels   with   internal   stiffeners   of   3mm   thick   made   of galvanized  sheet,  3  mm  thick  hinge  reinforcing  hardware  mounting plates  and  lock  protection  with  Honey-comb  craft  paper  infill  of thickness  150  GSM  of  load  bearing  capacity  500  Kg/Sqm.  c.)  Finish: Powder  coated  surface  finished  with  thermosetting  polyurethane paint of Aliphatic grade of thickness 60-micron d.)  Accessories: Min 8 Anchor  fastener  of  HILTI  make,  min  3  SS  Ball  Bearing  Butt  Hinges  of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mm size, Eye hole, Door stopper complete.
As directed by Engineer-in-charge Sqm 6368 263
1885 Doors and Windows 51.92 BDT Providing & fixing factory-made steel door of Single leaf External Plain Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003  ,  1.2  mm  thick  pre  galvanized  sheet  with  mitred  and welded cones , frame stretches, hinge reinforcing plates , fixing plates and   hardware   mounting   plates   and   Polyurethane   foam   infill   b.) Shutter  of  thickness  46mm  made  of  0.8  mm  thick  slip  coated  pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525,  BS  2989  1994,  IS  277  ,  Zinc  coating  120  GSM  .  Lock  formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3  mm  thick  hinge  reinforcing  hardware  mounting  plates  and  lock protection with Honey-comb craft paper infill of thickness 150 GSM of load  bearing  capacity  500 Kg/Sqm.  c.) Finish:  Powder coated  surface finished  with  thermosetting  polyurethane  paint  of  Aliphatic  grade  of thickness  60-micron  d.)   Accessories:  Min  8  Anchor  fastener  of  HILTI make,  min  3  SS  Ball  Bearing  Butt  Hinges  of  Dorset  make,  Dorset Mortise  lock,  SS  Tower  bolt  of  200 mm  size, Eye  hole, Door  stopper complete.
Sizes up to 1200 x2439 mm
As directed by Engineer-in-charge Sqm 6080 263
1886 Doors and Windows 51.93 BDT Providing & fixing factory-made steel door of Single leaf External Plain Steel finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003  ,  1.2  mm  thick  pre  galvanized  sheet  with  mitred  and welded cones , frame stretches, hinge reinforcing plates , fixing plates and   hardware   mounting   plates   and   Polyurethane   foam   infill   b.) Shutter  of  thickness  46mm  made  of  0.8  mm  thick  slip  coated  pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525,  BS  2989  1994,  IS  277  ,  Zinc  coating  120  GSM  .  Lock  formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3  mm  thick  hinge  reinforcing  hardware  mounting  plates  and  lock protection with Honey-comb craft paper infill of thickness 150 GSM of load  bearing  capacity  500 Kg/Sqm.  c.) Finish:  Powder coated  surface finished  with  thermosetting  polyurethane  paint  of  Aliphatic  grade  of thickness  60-micron  d.)   Accessories:  Min  8  Anchor  fastener  of  HILTI make,  min  3  SS  Ball  Bearing  Butt  Hinges  of  Dorset  make,  Dorset Mortise  lock,  SS  Tower  bolt  of  200 mm  size, Eye  hole, Door  stopper complete. As directed by Engineer-in-charge Sqm 5790 263
1887 Doors and Windows 51.94 BDT Providing & fixing factory-made steel door of Single leaf Internal Plain Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003  ,  1.2  mm  thick  pre  galvanized  sheet  with  mitred  and welded cones , frame stretches, hinge reinforcing plates , fixing plates and   hardware   mounting   plates   and   Polyurethane   foam   infill   b.) Shutter  of  thickness  46mm  made  of  0.8  mm  thick  slip  coated  pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525,  BS  2989  1994,  IS  277  ,  Zinc  coating  120  GSM  .  Lock  formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3  mm  thick  hinge  reinforcing  hardware  mounting  plates  and  lock protection with Honey-comb craft paper infill of thickness 150 GSM of load  bearing  capacity  500 Kg/Sqm.  c.) Finish:  Powder coated  surface finished  with  thermosetting  polyurethane  paint  of  Aliphatic  grade  of thickness  60-micron  d.)   Accessories:  Min  8  Anchor  fastener  of  HILTI make,  min  3  SS  Ball  Bearing  Butt  Hinges  of  Dorset  make,  Dorset cylindrical lock, SS Tower bolt of 200 mm size, Door stopper complete. As directed by Engineer-in-charge Sqm 5509 263
1888 Doors and Windows 51.95 BDT Providing & fixing factory-made steel door of Single leaf Internal Plain Steel finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003  ,  1.2  mm  thick  pre  galvanized  sheet  with  mitred  and welded cones , frame stretches, hinge reinforcing plates , fixing plates and   hardware   mounting   plates   and   Polyurethane   foam   infill   b.) Shutter  of  thickness  46mm  made  of  0.8  mm  thick  slip  coated  pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525,  BS  2989  1994,  IS  277  ,  Zinc  coating  120  GSM  .  Lock  formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3  mm  thick  hinge  reinforcing  hardware  mounting  plates  and  lock protection with Honey-comb craft paper infill of thickness 150 GSM of load  bearing  capacity  500 Kg/Sqm.  c.) Finish:  Powder coated  surface finished  with  thermosetting  polyurethane  paint  of  Aliphatic  grade  of thickness  60-micron  d.)   Accessories:  Min  8  Anchor  fastener  of  HILTI make,  min  3  SS  Ball  Bearing  Butt  Hinges  of  Dorset  make,  Dorset cylindrical lock, SS Tower bolt of 200 mm size, Door stopper complete. As directed by Engineer-in-charge Sqm 5211 263
1889 Doors and Windows 51.96 BDT Providing & fixing factory-made Single leaf 2 hour fire rated door   as per  IS  3614  Part  2  &  BS  476  Part  20  &  22,  tested  to  UL  10  C  and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of 1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or   double   rebate   profile   b.)   Shutter   of   46   mm   thickness   and constructed   from   1.2   mm   thick   skin   pas   galvanized   iron   sheet (Conform to IS 277) infill Rockwool / Mineral wool/ Honey comb craft paper  c.)  Vision  glass  of  5mm  thick  clear/wired  glass  Circular  or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete. As directed by Engineer-in-charge Sqm 7236 263
1890 Doors and Windows 51.97 BDT Providing & fixing factory-made Single leaf 2 hour fire rated door   as per  IS  3614  Part  2  &  BS  476  Part  20  &  22,  tested  to  UL  10  C  and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of 1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or   double   rebate   profile   b.)   Shutter   of   46   mm   thickness   and constructed   from   1.2   mm   thick   skin   pas   galvanized   iron   sheet (Conform to IS 277) infill Rockwool / Mineral wool/ Honey comb craft paper  c.)  Vision  glass  of  5mm  thick  clear/wired  glass  Circular  or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer , Panic bar and external trim lock and Flush bolts complete. As directed by Engineer-in-charge Sqm 8686 263
1891 Doors and Windows 51.98 BDT Providing & fixing factory-made Aluminum windows of aluminum alloy HE  9WP  (6063  T5/T6),  powder  coating  of  jotun/AkzoNobel  of  60 micron  thickness  a.)  Glass:  5mm  thick  clear  float  of  Saint  Gobain  / Asahi  make  b.)  Mesh  of  SS  Type  304  grade  of  .22  mm  thickness  c.) Accessories: EPDM (Ethylene Propylene Diene Monomer) Gasket , SS Screws  ,  Aluminum  cleats  ,  Roller  ,  Push  handle  ,  Fly  mesh  handle  , Anti lifter , U guide glass and mesh shutter complete As directed by Engineer-in-charge Sqm 5471 385
1892 Doors and Windows 51.99 BDT Providing  &  fixing  factory-made  steel  windows  constructed  of  Skin Pass  Galvanized  Iron  Sheet  (as  per  IS  513 “D"  Quality, Galvanized  as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr& thickness of
0.6 mm) with a. ) Window Shutter of .6mm thick skin pass Galvanized lron Sheet b.) Window Frames of .8m thick skin pass Galvanized Iron sheet  of  size  80mm  X  45mm  c.)  Mullion  :  of  0.8mmthick  skin  pass Galvanized lron sheet of size 80mm X 60mm d.) Vision Glass of 4mm clear  float  glass  in  rectangular  shape.  e.)  Finish  :  Coated  with  Zinc Phosphate  Primer  or  Thermosetting  Polyurethane  paint  of  Aliphatic Grade providing high levels of scratch resistance and durability f. ) MS Grill  of  10  mm  square  MS  bright  bars  g.)  Accessories  :  SS  Pin  type Hinges  —  1  Set;  Polypropylene  ,  Handle  —  1,  Friction  Stay  Powder Coated  –  1,  MS  powder  coated  Tower  bolt  —  2  (Ethyl  Propylene Diamine Monomer (EPDM) Should be used all around glass in shutter for fixing of glass); corner brackets — 4 (made of Polypropylene each per shutter and frame) complete
As directed by Engineer-in-charge Sqm 6383 385
1893 Doors 51.100   Providing,aupplying,fabricating    and    fixing    panel    of    aluminium composite panel cladding in approved shape made out of 4 mm thick ACP  sheet  material  consisting  of  3mm  thick  FR  grade  mineral  core following   NBC   part   IV   Fire   and   life   safety   (having   2   hours   fire resistance  in  accordance  to  ASTM  E119-12  and  BS476  part  6  and  7 class  O)  sandwitched  between  two  aluminium  sheets  (each  0.5  mm thick  of  AA  5005/AA3105  grade)  The  aluminium  composite  panel cladding    sheet    shall    be    coil    coated    with    kynar    500    based PVDF/Lumiflon based fluropolymer resin (having 70:30  ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer  (service)  coating  of  bottom  face  as  specified  using  stainless steel  screws,nuts,bolts,washers,cleats,weather  silicon  sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 kg/sqm) As directed by Engineer-in-charge Sqm 3870 1150
1894 Plastering and Pointing 51.101 BDL Providing  internal  cement  plaster  25  mm  thick  in  single  coat  using Ready  to  use  wall  plaster  in  cement  mortar  1:4  to  concrete,  brick, stone   surfaces   in   all   positions   including   scaffolding   and   curing. Providing  groove  at  joint  of  B.B.  Masonry  and  concrete  members complete.
With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 495 177
1895 Plastering and Pointing 51.102 BDL Providing  internal  cement  plaster  20mm  thick  in  a  single  coat  using Ready  to  use  wall  plaster   to  concrete,  brick  surfaces  in all  positions including   scaffolding   and   curing.   Providing   groove   at   joint   of B.B.Masonry and concrete members complete.
a) cement ratio 1:5 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 405 162
1896 Plastering and Pointing 51.103 BDL Providing  internal  cement  plaster  20mm  thick  in  a  single  coat  using Ready  to  use  wall  plaster   to  concrete,  brick  surfaces  in all  positions including   scaffolding   and   curing.   Providing   groove   at   joint   of B.B.Masonry and concrete members complete.
b) cement mortar 1:4 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 417 162
1897 Plastering and Pointing 51.104 BDL Providing  internal  cement  plaster  20mm  thick  in  a  single  coat   using Ready  to  use  wall  plaster   to  concrete,  brick  surfaces  in all  positions including   scaffolding   and   curing.   Providing   groove   at   joint   of B.B.Masonry and concrete members complete
C ) cement mortar 1:3 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 429 162
1898 Plastering and Pointing 51.105 BDL Providing  internal  cement  plaster  20mm  thick  in  a  single  coat  using Ready  to  use  wall  plaster   in  cement  mortar  1:3  to  stone  masonry surfaces  in  all  positions  including  scaffolding  and  curing.  Providing groove at joint of stone masonry and concrete members complete.
With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 429 162
1899 Plastering and Pointing 51.106 BDL Providing  internal  cement  plaster  12  mm  thick  in a  single coat  using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of
B.B. Masonry and concrete members complete.
a) cement ratio 1:5 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 213 80
1900 Plastering and Pointing 51.107 BDL Providing  internal  cement  plaster  12  mm  thick  in a  single coat  using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of
B.B. Masonry and concrete members complete.
b) cement ratio 1:4 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 225 80
1901 Plastering and Pointing 51.108 BDL Providing  internal  cement  plaster  12  mm  thick  in a  single coat  using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of
B.B. Masonry and concrete members complete.
c) cement ratio 1:3 With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 228 80
1902 Plastering and Pointing 51.109 BDL Providing  internal  cement  plaster  6  mm  thick  in  a  single  coat  using Ready to use wall plaster in cement mortar 1:3 to concrete surface in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.
With Prior Approval of Concerned S.E.
As directed by engineer in charge Square Meter 173 55
1903 Brick Masonary 51.110 BDG Providing  Autoclaved  areated  concrete  block  masonry  of  approved manufacture  confirming  to  IS  2185  Part  III  1984  of  size  600  mm  x 200mm  and  thickness  100,150,  200  or  250  mm  using  Ready  to  use BLOCK  JOINT  MORTAR1:6  in  foundations  and  plinth  of  inner  walls  / external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete..
With Prior Approval of Concerned S.E.
As directed by engineer in charge Cubic Meter 6056 1216
1904 Iron Work 51.111 BDW Providing and fixing 50mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary  welding,  grinding,  finishing,  buffing  to  stainless  steel  pipe etc. complete As directed by Engineer Incharge Running Metre 3250 1399
  water supply and sanitary 51.112 BDW Providing  and  installing  bio  digester  unit based  on DRDO  technology made   of   fibre   reinforced   plastic   (FRP)   having   composition   and following  technical  specifications  and  including  necessary  pipe  and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester.
Percentage  of  fibre  glass  (glass  content  in  fibre  glass  should  be minimum 30%): -33.33%
Percentage of polyester resin: - 66.67% Water absorption (as per ASTM):-0.30% Flammability as per ASTM
Tensile strength:-115 MPA
Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2
Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm
Outlet pipe size rigid PVC:-80mm
Gas outlet rigid PVC with Valve: 20mm
Bacteria immobilization PVC mattes (on all partition)
With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below
       
1905   a   a) Up to 10 user size (1.0mx1.0mx0.70m),  Capacity of biodgester:-700 liters,   Area  of  top,  bottom  and  side  walls:  -  4.80  sq.m,   Area  of partition  walls:  1.40sq.m,   Total  weight  of  FRP:  -  33.48  kg,   Bacteria inoculums  quantity:  -  200  liters  ,  Minimum  thickness  of  side  walls  / top  and  bottom:  3mm,   Number  of  inside  partitions:  -  3,   Minimum thickness of partition wall: 3mm. As directed by Engineer Incharge No. 40565 4000
1906   b   b) Up to 15 user size (1.0mx1.0mx1.0m), Capacity of biodgester:-1000 liters, Area of top, bottom and side walls: - 6 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - 54 kg, Bacteria inoculums quantity:
- 400 liters, Minimum thickness of side walls / top and bottom: 4mm, Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm
As directed by Engineer Incharge No. 68345 6800
1907   c   c) Up to 25 user size (1.5mx1.0mx1.0m), Capacity of biodgester:-1500 liters,  Area  of  top,  bottom  and  side  walls:-  8  sq.m,  Area  of  partition walls:  2  sq.m,  Total  weight  of  frp:  -  82.80  kg,  Bacteria  inoculums quantity:  -  600  liters,  Minimum  thickness  of  side  walls  /  top  and bottom: 5mm, Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm As directed by Engineer Incharge No. 93175 9300
1908   d   d) Up to 40 user size (2.0mx1.0mx1.0m), Capacity of biodgester:-2000 liters, Area of top, bottom and side walls: - 10 sq.m, Area of partition walls:  3  sq.m,  Total  weight  of  frp:  -  106.20  kg,  Bacteria  inoculums quantity:  -  600  liters,  Minimum  thickness  of  side  walls  /  top  and bottom: 5mm, Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm As directed by Engineer Incharge No. 123978 12000
1909   e   e) Up to 60 user size (2.4mx1.25mx1m), Capacity of Biodigester:-3000 liters,  Area  of  top,  bottom  and  side  walls:  -  13.30  sq.m,  Area  of partition  walls:  3.75sq.m,  Total  weight  of  FRP:  -  139.95  kg,  Bacteria inoculums  quantity:  -  1000  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  5mm,  Number  of  inside  partitions:  -  3,  Minimum thickness of partition wall: 3mm As directed by Engineer Incharge No. 163261 16000
1910   f   f)  Up  to  80  user  size  (2.7mx1.5mx1m),  Capacity  of  Biodigester:-4000 liters,  Area  of  top,  bottom  and  side  walls:  -  16.50  sq.m,  Area  of partition  walls:  4.50sq.m,  Total  weight  of  FRP:  -  202.50  kg,  Bacteria inoculums  quantity:  -  1400  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  6mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 3mm As directed by Engineer Incharge No. 236232 23000
1911   g   g)  Up  to  100  user  size  (2.5mx2mx1m),  Capacity  of  Biodigester:-5000 liters,  Area  of  top,  bottom  and  side  walls:  -  19.00  sq.m,  Area  of partition  walls:  8.00sq.m,  Total  weight  of  FRP:  -  248.40  kg,  Bacteria inoculums  quantity:  -  1800  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  6mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 3mm As directed by Engineer Incharge No. 290862 29000
1912   h   h)  Up  to  150  user  size  (3.2mx2.0mx1.25m),  Capacity  of  Biodigester:- 8000 liters, Area of top, bottom and side walls: - 25.80 sq.m, Area of partition walls:  10.00sq.m, Total  weight of FRP: - 397.08 kg, Bacteria inoculums  quantity:  -  3200  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  7mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 4mm As directed by Engineer Incharge No. 466876 46000
1913   i   i)  Up  to  200  user  size  (4mx2.0mx1.25m),  Capacity  of  Biodigester:- 10000 liters, Area of top, bottom and side walls: - 31.00 sq.m, Area of partition walls:  10.00sq.m, Total  weight of FRP: - 462.60 kg, Bacteria inoculums  quantity:  -  3400  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  7mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 4mm As directed by Engineer Incharge No. 549936 54000
1914   j   j)  Up  to  300  user  size  (4.8mx2.0mx1.25m),  Capacity  of  Biodigester:- 12000 liters, Area of top, bottom and side walls: - 36.20 sq.m, Area of partition walls:  10.00sq.m, Total  weight of FRP: - 593.28 kg, Bacteria inoculums  quantity:  -  4200  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  8mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 4mm As directed by Engineer Incharge No. 689174 68000
1915   k   k)  Up  to  400  user  size  (5mx2.0mx1.5m),  Capacity  of  Biodigester:- 15000 liters, Area of top, bottom and side walls: - 41.00 sq.m, Area of partition walls:  12.00sq.m, Total  weight of FRP: - 678.80 kg, Bacteria inoculums  quantity:  -  5200  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  8mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 4mm As directed by Engineer Incharge No. 800153 80000
1916   l   l) Up to 500 user size (6mx2.0mx1.6m), Capacity of Biodigester:-20000 liters,  Area  of  top,  bottom  and  side  walls:  -  50.72  sq.m,  Area  of partition walls:  13.36sq.m, Total  weight of FRP: - 917.86 kg, Bacteria inoculums  quantity:  -  7000  liters,  Minimum  thickness  of  side  walls  / top  and  bottom:  9  mm,  Number  of  inside  partitions:  -  4,  Minimum thickness of partition wall: 4mm As directed by Engineer Incharge No. 1081250 100000
1917 water proofing 51.113 BDJ Providing  and  laying  Hyperplas  Aluminium  or  equivalent  polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 kg/sqm) which is comprise of top with "V"  shape  embossed   40  micron   Aluminium  foil   to   bear   thermal expansion  and  avoiding  delamination  &  consist  of  centre  core  of  90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 kg/sqm maximum as per surface condition or Hyperplas primer @ 250 gms/sqm as  per site  condition  on  the  surface  to  be  treated  with  10  cm  overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this  item in estimate). As directed by Engineer Incharge Sqm 747 212
1918 water proofing 51.114 BDJ Providing  and  laying  Hyperplas   standard  or  equivalent  polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 kg/sqm) & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 kg/sqm maximum as per surface condition or Hyperplas primer @ 250 gms/sqm as  per site  condition  on  the  surface  to  be  treated  with  10  cm  overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this  item in estimate). As directed by Engineer Incharge Sqm 604 133
1919 water proofing 51.115 BDJ Providing and laying mechanical protective layer over water proofing membrane with cement screed plaster 1:5  after laying chicken mesh over membrane including curing etc. complete 20 mm thick with cost of  chicken  mesh  etc.  complete  and  covering  7  years  guarantee  on court stamp paper of Rs.100/- including necessary testing specified by Engineer (Prior permission of S.E. is necessary before inclusion of this item in estimate) (Note :- This item shall be executed over item no. 5 of BD-J Water Proofing) As directed by Engineer Incharge Sqm 286 120
1920 Plastering 51.116 BDL Providing and applying a Silicon Base Water Repellent Stone Sealers, on  Brick  /  Stone  masonry   /  Concrete  surfaces   in  Two   coats   by spraying. Including cleaning / sand blasting for  removing dirt / cement mortar patches etc. by force water jet, wire brushing etc. complete. As directed by Engineer Incharge Sqm 512  
1921 Plastering 51.117 BDL Providing   internal   /   external    12   mm   thick   Ready   Mix   plaster confirming  to  IS:4031(Part-4)  1988  and  IS  383-1970  in  a  single  coat using  Cement  mortar   of  proportion  1:4  containing  special  type  of polymer  additives  about  0.4%,  to  all  type  of  surfaces  in  all  positions including scaffolding and curing complete. As directed by Engineer Incharge Sqm 214  
1922 Plastering 51.118 BDL Providing   internal   /   external   20   mm   thick   Ready   Mix   plaster confirming  to  IS:4031(Part-4)  1988  and  IS  383-1970  in  a  single  coat using  Cement  mortar   of  proportion  1:4  containing  special  type  of polymer  additives  about  0.4%,  to  all  type  of  surfaces  in  all  positions including scaffolding and curing complete As directed by Engineer Incharge Sqm 378  
1923 Brick Masonary 51.119 BGG Providing  brick  masonry  with  interlock  "Fourlock"  bricks  in  retaining walls  ,diaphragm  wall  ,compound  wall  ,plinth  &  partition  wall  etc  of specified   150   mm   thick   including   construction   with   interlock "Fourlock"  brick,  filling  the  hollow  spaces  with  cementious  grout material of proportion of C:M 1:6 using trap stone grit metal/artificial sand   dusting   off   the   finished   brick   masonry"Fourlock"   bricks, surface,watering    &    curing    etc    complete.    (    Including    steel reinforcement  of  8mm  bar  as  strengthening  bar  in  hollow  spaces  of fourlock bricks with cementious greet material ) As directed by Engineer Incharge Sqm 1273  
1924 Brick Masonary 51.120 BGG Providing  brick  masonry  with  interlock  "Fourlock"  bricks  in  plinth  & superstructure of specified 150 mm thick including construction with interlock  "Fourlock"  bricks,filling  the  hollow  spaces  with  cementious grout   material   of   proportion   of   C:M   1:6   using   trap   stone   grit metal/artificial  sand  including  dusting  off  the  finished  brick  masonry surface,watering    &    curing    etc    complete.    (    Excluding    steel reinforecement for strengthening ) As directed by Engineer Incharge Sqm 1099  
1925 Brick Masonary 51.121 BGG Providing  brick  masonry  with  interlock  "Fourlock"  bricks  in  retaining walls  ,diaphragm  wall  ,compound  wall  ,plinth  &  partition  wall  etc  of specified   100   mm   thick   including   construction   with   interlock "Fourlock"  brick,  filling  the  hollow  spaces  with  cementious  grout material of proportion of C:M 1:6 using trap stone grit metal/artificial sand   dusting   off   the   finished   brick   masonry"Fourlock"   bricks, surface,watering    &    curing    etc    complete.    (    Including    steel reinforcement  of  8mm  bar  as  strengthening  bar  in  hollow  spaces  of fourlock bricks with cementious greet material ) As directed by Engineer Incharge Sqm 1085  
1926 Brick Masonary 51.122 BGG Providing  brick  masonry  with  interlock  "Fourlock"  bricks  in  plinth  & superstructure of specified 100 mm thick including construction with interlock  "Fourlock"  bricks,filling  the  hollow  spaces  with  cementious grout   material   of   proportion   of   C:M   1:6   using   trap   stone   grit metal/artificial  sand  including  dusting  off  the  finished  brick  masonry surface,watering    &    curing    etc    complete.    (    Excluding    steel reinforecement for strengthening ) As directed by Engineer Incharge Sqm 903  
 ROAD WORKS      
1927 Rigid Pavement (New item) 51.123 RD Construction of M-40 grade reinforced prestressesd precast concrete panel of 200 mm thickness having size 4.5m x 3.5m or as per drawing, casting the panels as per approved design and drawing in factory or plant including cost of all materials, formwork, reinforcement, dowel bars, tie bars, chairs, lifting bolts, grout ports, labour and all necessary machineries which are required for prestressing the wires, preparing concrete mix as per job mix design (The minimum cement content for M40 grade of PPCP shall be 440 kg/cum of concrete), making slots in panels for fixing dowel bars, tie bars, and placing necessary reinforcement as per design and drawing, steam/curing for 28 days including lifting, transportating and placing the panels at the required position, line, level and alignment as directed by Enginner in Charge, with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base. including providing and fixing in position MS Plain dowel bars precoated with anticorrosive epoxy paint of required Dia. having 45 cms. length and at 30.00 cm. c/c lubricated for half length with bituminous paint and providing & fixing TMT Fe 500 tie bars 12 mm dia. 60 cm long at 75 cm c/c, handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads.  Including,  Grouting of base of the panels as well as dowel and tie slots in the panels, Providing  contraction joints polysulphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into  groove of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (50 mm. deep x max. 6 mm wide) As directed by Engineer in charge Cubic Metre 11385 ---
1928 Road Furniture 51.124 RD Providing and laying of Plastirib T or equivalent  raised profile edge line marking (audible vibratory) with special hot applied thermoplastic road marking compound according to IRC 35 : 2015, Clause 7.7 with2 mm thick base coat layer above that ribs profile size of length 40 mm x width 140 mm x height 6mm thick (Total 8 mm thick) at the distance of 250 mm between two ribs including reflectorizing glass beads @ 250 gm / sq. mtr. area. The minimum and maximum width of raised profile should be 150 mm. The thickness of 8 mm profil should be exclusive of surface applied glass beads. The finished surface to be exclusive of surface applied glass beads. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on edge lines. As directed by Engineer in charge Square Metre 1009 27
1929 Road Furniture 51.125 RD Providing and laying of Plastirib 2K or equivalent  raised profile edge line marking (audible vibratory) with special 2 component cold applied road marking compound according to IRC 35 : 2015, Clause 7.7 with 2 mm thick base coat layer above that ribs profile size of length 40 mm  x width 140 mm x height 6mm thick (Total 8 mm thick) at the distance of 500 mm between two ribs including reflectorizing glass beads @ 250 gm / sq. mtr. area. The minimum and maximum width of raised profile should be 150 mm. The thickness of 8 mm profil should be exclusive of surface applied glass beads. The finished surface to be exclusive of surface applied glass beads. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on edge lines. As directed by Engineer in charge Square Metre 2629 27
1930 Road Furniture 51.126 RD Providing and Laying  of Rumble strips with Plastirib 2K, or equivalent 2 component cold plastic  profiled material to give total width of 500 mm and height of 10 mm. Ramp provided  to give width of 145 mm, width of ribs to be 55mm laid at centre to centre distance of 35 mm, with reflective glass beads @ 350 gm / sqm.  The finished surface to be levelled, uniform and free from streaks and holes, to be applied on the edge lines, including surface cleaning and cost of all materials etc. complete. As directed by Engineer in charge Square Metre 3706 27
1931 Road Furniture 51.127 RD Supplying and fixing  of Plastic body studs  with two shanks and without shanks of SWAREFLEX or equivalent in yellow, red and white color made of ABS body with size 100*100*17.9 mm, having reflective panels of 34 special Swaro glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity. Having reflective panels in yellow, red and white plastic with yellow, red, white or green Swaro glass elements. The studs shall have a compressive strength test certificate of 25 tons in accordance with ASTDM D 4280 and successfully passing retro reflectivity test as per  EN 1463-1 and the road test EN 1463-2 from a reputed laboratory. The fixing of the road studs shall be done by using a recommended Two Component Epoxy. In addition two holes should be drilled in the  depth of 50 mm on the road for the version with two shanks. As directed by Engineer in charge Number 477 27
1932 Road Furniture 51.128 RD Supplying and fixing of Swareflex or equivalent  Metal Road studs with shank, made of Die-cast Aluminum alloy molded body with the size of 100*100*19.8 mm, shank size 50mm, having reflective panels of 34 glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity having  reflective panels in yellow, red and white plastic with yellow, red, white or green glass elements. The weight of Aluminum stud should be not less than 370 grams. The studs shall have a compressive strength test certificate of 40 tons in accordance with ASTDM D 4280-04 and successfully passing retro reflectivity test as per EN 1463 part 1 & part 2, from a reputed international laboratory . The bidder shall attach a product warranty certificate against Breakage and loss of reflectivity from the manufacturer for 3 years from installation. The fixing of road studs shall be done by using a recommended Two Component Epoxy after drilling 60 mm hole on the road for the shank to go inside. As directed by Engineer in charge Number 562 27
1933 Road Furniture 51.129 RD Supplying and fixing of Plastic body of Swaro Warn or equivalent 184*81*60 mm, mounted on road side plastic guide posts at a height of  80cm to 100cm from the ground level and fixed on post with screws supplied with the Swaro warn product. Swaro Warn comes in white or blue color. Visual wildlife warning system deflecting the headlights of approaching vehicle towards Road side at Dusk or night for creating a visual warning fence for the wildlife to avoid the accidents of wild life. Confirming standards RVS 04.03.12. The Swaro Warn article 7178 can be used for all types of terrain. As directed by Engineer in charge Number 3446 27
1934 Road Sub Grade 51.130 RD Soil Stabilisation-Stabilization  of in-situ (existing pavement crust) or soil or otherwise sub-base course upto the required depth by cold in- situ recycling using chemical additives/otherwise: Providing pulverizing,spreading,milling and mixing of chemical additives at the rate of minimum 750 ml/cum require quantity as per job mix design in accordance with IRC37-2012.Cementitious additive @ rate of minimum 4% should be spread on the existing pavement using a mobile truck mounted containerized cement/additive spreader with microprocessor controlled weighing and spreading system.The additive spreader shall have variable working width sufficient to cover whole pavement lane.The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 mt and with minimum engine horse power of 440 kw with a variable working depth of minimum 50 cm.The resultant stabilised mix then would be profiled to the required grade ,level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth whell roller to achieve desired proctor density as per IRC37-2012 and complete in all respects
and curing with water as required including all materials ,labor and
As directed by Engineer in charge Cubic Metre 3495 ---
1935 Road Maintainance 51.131 RD Rehabilitation of existing damaged asphalt pavement by, cold, in-situ, recycling process, using foam bitumen as binder and cement as filler, as per IRC 120 2015 / IRC 37 2012.
A layer of 20 mm fresh aggregates to a thickness of 30 mm, or, as per design mix, would be pre-spread evenly, on the existing surface using paver / motor grader.
1.00% cement by weight of mix shall be pre-spread on the layer of fresh aggregates using truck mounted cement spreader with computer-controlled spreader system of width 2.40 meters.
The freshly laid aggregates, spreaded cement, and, a layer of existing damaged pavement shall be then pulverised and recycled in-situ by injecting 2% bitumen (VG30) as foam-bitumen to design depth using self-propelled 4 wheeled, cold recycler machine with working width of
2.4 m fitted with 440 KW engine.
The machine shall have in-built bitumen heating unit and duel spray bar, for foaming the heated bitumen (VG30) and water spray bar. The built-in nozzles shall evenly spray both, foamed bitumen and water during the milling process.
The resultant mix would then compact to required density by heavy roller, profiled by grader and further compacted by smooth roller and PTR.
(This cold recycled surface shall be then covered with tack coat and bituminous concrete of 50mm thickness, cost of both to be accounted separately)
As directed by Engineer in charge Running Metre 6396 ---
1936 Road Safety 51.132 RD Providing and erecting a Road Restraint system -  Roller System Barrier ETI Roller System H1 & H2 comprisiong of post of hot dip galvanized steel of 139.8mm diameter (L-2200  and L-750 ) thickness
4.5 mm   spaced with interval of 1 meter installed in to hardened road
. Safety frame rail from sheet of 3.20mm thick are fixed to main posts, shock absorbing rollers 345 mm diameter and 480mm height made of polypropelene - EVA , post caps,  locker , pipes and connection material. Distance between main post and short post shall be 500 mm. the height of upper edge rail is 960 mm. All steel parts( FRAME s235R equivalent SS400) and post S235JR shall be hot dip galvanised to protect against corrosion. The system shall be installed in accordance with the drawings and assembly instructions. etc. complete.
As directed by Engineer in charge Running Metre 73618 ---
1937 Road Surfacing Course 51.133 MORTH Section- 515 Providing and laying Stone Matrix Asphalt with 100-120 TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregate of specified grading premixed with bituminous binder @ 5.80 minimum percent of mix and filler, transporting the hot mix towards site, laying with hydrostatic paver finisher with sensor control to required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no.515 etch. complete in all respects, IRC SP 79 MORTH Section- 515 Cubic Metre 9283 ---
1938 Road Maintainance 51.134 RD Milling of existing bituminous surface to specified depth of bituminous layer including disposal of removed material with all lift and lead upto 1000 m etc complete. Using machine like Writgen
(W100) or equivalent
As directed by Engineer in charge Square Metre 40.70 ---
1939