BASIC RATES (SH: 21.0 ALUMINIUM WORK) | |||
Code | Description | Unit | Rate No. |
0100 | Bandhani | day | 617.00 |
0111 | Carpenter 1st class | day | 738.00 |
0112 | Carpenter 2nd class | day | 679.00 |
0114 | Beldar | day | 558.00 |
0116 | Fitter (grade 1) | day | 738.00 |
0119 | Glazier | day | 679.00 |
0123 | Mason (brick layer) 1st class | day | 738.00 |
0124 | Mason (brick layer) 2nd class | day | 679.00 |
0139 | Skilled Beldar (for floor rubbing etc.) | day | 617.00 |
0589 | Chromium plated Brass screws 20 mm | 100 Nos | 160.00 |
0689 | Anodised Aluminium butt hinges 100x75x4 mm | 10 Nos | 393.00 |
0992 | Galvanised steel plain sheets | quintal | 5000.00 |
2406 | Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) | sqm | 300.00 |
2407 | Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) | sqm | 500.00 |
2408 | Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm) | sqm | 610.00 |
2604 | Weather/ structural non sag. Elastomeric PU sealant (600ml) sausage) for joints in RCC/ Brick/ stone/ Wood/ Ceramic/ Gypsum/ Aluminum work complying to ASTM C 920, DIN 18540 - F & ISO 11600 incl. all taxes | each | 532.00 |
2704 | Aluminium Strip 40 mm wide and 2 mm thick | kg | 240.00 |
7001 | Brass 100mm mortice latch and lock with 6 levers without pair of handles | each | 210.00 |
7019 | Dash fastener / Chemical fastener | each | 14.00 |
7048 | Rawl plug 50 mm (designation 10 nos) | each | 25.00 |
7306 | Aluminium T or L sections | kg | 190.00 |
7313 | Expandable fastener with plastic sleeve and M.S. screws : 32 mm long | each | 10.00 |
7347 | Cadmium plated full threaded steel screws (30x4 mm dia) | 100 Nos | 27.00 |
7348 | Aluminium washer 2 mm thick 15 mm dia | 100 Nos | 10.00 |
7388 | Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt | each | 11.00 |
7389 | Anodising 15 microns on aluminium sections | kg | 38.00 |
7390 | EPDM Gasket for uPVC window/door | metre | 19.00 |
7391 | Anodising 25 microns on aluminium sections | kg | 48.00 |
7392 | Powder coating 50 microns on aluminium sections | kg | 61.00 |
7393 | Polyester powder coating 50 microns on aluminium sections | kg | 67.00 |
7394 | Double action hydraulic floor spring with stainless steel cover plate | each | 1500.00 |
7395 | 6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length) | each | 20.00 |
7396 | Double action hydraulic floor spring with brass cover plate | each | 1620.00 |
7477 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade i, Type II conforming to IS : 12823 (exterior grade) 12 mm thick |
sqm | 540.00 |
7480 | Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick | sqm | 575.00 |
8646 | Weather Silicon sealant | cartridge | 100.00 |
8647 | Stainless steel screws 30 mm x4 mm | 100 Nos | 32.00 |
8648 | Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side having 12 mm air gap | sqm | 2150.00 |
8649 | Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19 mm | each | 172.00 |
8650 | Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19 mm | each | 222.00 |
8651 | Stainless steel (SS 304 grade) adjustable friction window stay 355 x 19 mm | each | 195.00 |
8652 | Stainless steel (SS 304 grade) adjustable friction window stay 510 x 19 mm | each | 525.00 |
8653 | Stainless steel (SS 304 grade) adjustable friction window stay 710 x 19 mm | each | 900.00 |
8654 | Masking tape | metre | 1.95 |
8660 | Aluminium casement window fastener (Anodised AC 15) | each | 44.00 |
8661 | Aluminium casement window fastener (powder coated ) | each | 47.00 |
8662 | Aluminium casement window fastener (polyester powder coated) | each | 46.00 |
8663 | Aluminium round shape handle (anodised AC 15) outer dia 100 mm | each | 53.00 |
8664 | Aluminium round shape handle (powder coated) outer dia 100 mm | each | 56.00 |
8665 | Aluminium round shape handle (polyester powder coated) outer dia 100 mm | each | 60.00 |
8666 | Stainless steel screws 25 mm x4 mm | 100 Nos | 38.00 |
8674 | Precoated galvanised steel gutter 600mm overall girth | metre | 420.00 |
8676 | Precoated galvanised steel barge board (upto 300mm ) | metre | 215.00 |
8678 | 1 mm thick 35 mm wide bright finished stainless steel piano hinges | metre | 42.00 |
8774 | Aluminium Grill as per IS 1868 | kg | 260.00 |
8776 | Stainless steel dash fastener of 8 mm dia and 75 mm long bolt | each | 15.00 |
8778 | Toughened glass 12 mm thickness | sqm | 1747.00 |
9977 | Carriage | L.S. | 2.00 |
9988 | Carriage and sundries | L.S. | 2.00 |
9999 | Sundries | L.S. | 2.00 |
21.0 ALUMINIUM WORK | |||
Code No. |
Description | Unit | Rate |
21.1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | ||
21.1.1 | For fixed portion | ||
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | kg | 423.95 | |
21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 456.30 | kg | 456.30 | |
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | kg | 464.70 | |
21.1.2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | ||
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | kg | 513.40 | |
21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) | kg | 546.35 | |
21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | kg | 554.95 | |
21.2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. | ||
21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | sqm | 997.70 | |
21.2.2 Pre-laminated particle board with decorative lamination on both sides | sqm | 1046.90 | |
21.3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | ||
21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) | sqm | 999.60 | |
21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) | sqm | 1296.40 | |
21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) | sqm | 1462.35 | |
21.4 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | ||
21.4.1 With stainless steel cover plate minimum 1.25 mm thickness | each | 2412.50 | |
21.4.2 With brass cover plate minimum 1.25 mm thickness | each | 2573.05 | |
21.5 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-incharge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). | kg | 670.85 |
21.6 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. | each | 69.95 |
21.7 | Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. |
||
21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | kg | 582.05 | |
21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) | kg | 614.35 | |
21.8 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | ||
21.8.1 Upto 5mm depth and 5 mm width | metre | 79.45 | |
21.9 | Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. | ||
21.9.1 For fixed portion | kg | 13.40 | |
21.9.2 For shutters of doors, windows & ventilators | kg | 13.40 | |
21.10 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. | sqm | 3905.35 |
21.11 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin- charge complete. | ||
21.11.1 205 X 19 mm | each | 255.75 | |
21.11.2 255 X 19 mm | each | 322.65 | |
21.11.3 355 X 19 mm | each | 286.50 | |
21.11.4 510 X 19 mm | each | 728.05 | |
21.11.5 710 X 19 mm | each | 1229.75 | |
21.12 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. | ||
21.12.1 Anodized (AC 15 ) aluminium tubular handle bar | each | 512.30 | |
21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar | each | 562.60 | |
21.12.3 Polyester powder coated minimum thickness 50 micronaluminium tubular handle bar | each | 575.70 | |
21.13 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) foraluminium doors including necessary cutting and making good etc.complete. | each | 458.55 |
21.14 | Providing and fixing anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868. Minimum anodiccoating of grade AC 15) sub frame work for windows and ventilatorswith extruded built up standard tubular sections of approved makeconforming to IS: 733 and IS: 1285, fixed with dash fastener of requireddia and size (Dash fastener to be paid for separately). | kg | 354.75 |
21.15 | Providing and fixing aluminium casement windows fastener of requiredlength for aluminium windows with necessary screws etc. complete. | ||
21.15.1 Anodized (AC 15) aluminium | each | 67.55 | |
21.15.2 Powder coated minimum thickness 50 micron aluminium | each | 71.55 | |
21.15.3 Polyester powder coated minimum thickness 50 micronaluminium | each | 70.25 | |
21.16 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-incharge | ||
21.16.1 Anodized (AC 15 ) aluminium | each | 79.60 | |
21.16.2 Powder coated minimum thickness 50 micron aluminium | each | 83.60 | |
21.16.3 Polyester powder coated minimum thickness 50 micronaluminium | each | 88.95 | |
21.17 | Providing and fixing anodised aluminium grill (anodised transparentor dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approvedstandard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, includingcutting the grill to proper opening size for fixing and operation ofhandles and fixing approved anodised aluminium standard sectionaround the opening, all complete as per requirement and direction ofEngineer-in-charge. (Only weight of grill to be measured for payment). | kg | 519.85 |
21.18 | Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providing andfixing top & bottom pivot & double action hydraulic floor springtype fixing arrangement and making necessary holes etc. for fixingrequired door fittings, all complete as per direction of Engineer-incharge(Door handle, lock and stopper etc.to be paid separately). | sqm | 4447.90 |
21.19 | Filling the gap in between aluminium/ stone/ wood frame and adjacentRCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providingweather/structural non sag elastomeric PU sealant over backer rodof approved quality as per architectural drawings and direction ofEngineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 | ||
21.19.1 Upto 5 mm depth and 5 mm width | metre | 125.10 | |
21.19.2 Upto 10 mm depth and 10 mm width | metre | 170.55 | |
21.19.3 Upto 20 mm depth and 20 mm width | metre | 308.70 |
****