Building Civil Items-3



Building Civil Items-3

    N.SECTION DOORS
(Landing cost – including loading, cost of conveyance, unloading)
   
1   2 3 4 5
    I.SUB- SECTION DOOR FRAMES    
671 MAT-05431 BMT-N.80 Powder Coated Mild Steel Hallow single rebate door frames manufactured using cold  roll  formed  process  steel  sheet  of
1.25 mm thick bright (Cold Rolled Close Annealed  (CRCA)  and  profile  size  of 105  x  60  mm  conforming  to 
IS  4351  - 2003 including pretreatment, Galvanized as per IS:277, zinc phosphating finished with   Thermosetting  Polyurethane  paint of Aliphatic  Grade  providing  high levels of         scratch         resistance         and durability/Epoxy   polyester   powder   for powder coating paint thickness 60 – 65 microns(Dry     film    thickness)Stainless Steel  Ball  Bearing  Butt  Hinges  3  mm thick   fixed   flush   to   the   frame   with Hinges,    Base    Ties,    Holdfast    Lugs, Mortar   Guards,   shock   absorbers   and provision for Tower Bolts, Aldrops, Lock &  Strike  plates  etc.  for  both  single  and double shutter doors
1 RM 619
672 MAT-05432 BMT-N.81 Mild  Steel Hallow  single  rebate  general purpose    door    frames    manufactured using   cold   roll   formed   process   steel sheet  of  1.25  mm  thick   bright  (Cold Rolled   Close   Annealed   (CRCA)   and profile-B    of    size    105    x    60    mm conforming  to IS  4351  -  2003  including pretreatment,  phosphating  with  Hinges, Base    Ties,    Holdfast    Lugs,    Mortar Guards,  shock  absorbers  and  provision for  Tower  Bolts,  Aldrops,  Lock  &  Strike plates  etc.  for  both  single  and  double shutter doors 1 Rm 353
673 MAT-01330 BMT-N.01 Providing      and   fixing   factory   made polyvinyl chloride (PVC) Door Frame  of the   size   50   x   47mm   with   a   wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined  with 2nos.  of 150mm long brackets of 15x15mm M.S. square   tube.   The   two   vertical   door profiles    are    to    be    reinforced    with 19x19mm   M.S.   Square   tube   of   19 gauge. The door frame shall be fixed to the   wall   using   65/100mm   long   M.S. Screws through the frame by using PVC fasteners.   A   minimum   of   4nos.   of screws  to  be  provided  for  each  vertical member & minimum 2nos. for horizontal member      etc.      complete      as      permanufacturers        specification        and direction    of    Engineer-in-Charge    for finished item of work 1 Rm 330
674 MAT-01334 BMT-N.05 SINGLE SIDE PRELAM SOLID PANEL PVC   DOOR   FRAME   (CHOUKHAT):
Providing  and  fixing  factory  made  Pac single  side  Prelam  door  frame  of  the size 50X47 mm with a wall thickness of 5mm,  made  out  of  extruded  5mm  rigid Pac single side prelam sheet, meter cut at two corners and joined  with 2nos.  of 150mm    long    brackets    of    1515mm MS.Square  tube.  The  two  vertical  door profiles    are    to    be    reinforced    with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using    65/100mm    long    MS.    Screws through    the    frame    by    using    Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and    minimum    2nos.    for    horizontal member      etc.      complete      as      per manufacture  specification  and  direction of Engineer-in-charge.
1 Rm 330
675 MAT-01361 BMT-N.32 Supply and fixing of door frame made of hollow  extruded  PVC  section    having dimensions of 40 X 57mm with the wall thickness   of   2mm   +/-   0.2mm   duly reinforced with seasoned wood plank at the  hinges  side.  The  door  frame  top  2 corners shall be metri-cut/ welded. PVC DOOR FRAME 1 RM 237
676 MAT-01362 BMT-N.33 Supply and fixing of door frame made of hollow extruded PVC section  having dimensions of 40 X 46 mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be mitre cut/welded 1 RM 186
677 MAT-01363 BMT-N.34 Supply & fixing of Door frames made of all   formed   sections   of   1.25mm   thick CRCA section, size should be 50x60mm with  32mm  rebate.  The  corner  of  the frame   should   be   welded.   The   frame should   be   painted   with   one   coat   of primer  and  finished  painted  with  pure polyester  paint.  The  frame  should  be provided   with   approved   quality   butt hinges  of 3  Nos.   complete  for  finished item.:      Single   shutter   3'-0"   x   7'-0" (914.4x2133.6mm)  outer  frame  section size of 50 x 60 mm 1RM 197
678 MAT-01364 BMT-N.35 Supply & fixing of Door frames made of all   formed   sections   of   1.25mm   thick CRCA section, size should be 50x60mm with  32mm  rebate.  The  corner  of  the frame   should   be   welded.   The   frame should   be   painted   with   one   coat   of primer  and  finished  painted  with  pure polyester  paint.  The  frame  should  be provided   with   approved   quality   butt hinges  of 3  Nos.   complete  for  finished item.: Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer frame section size of 50 x 60 mm 1 RM 200
679 MAT-01365 BMT-N.36 Supplying  & fixing  of  Door  frame  made of  roll  formed  section  of  1.25  mm  thick CRCA  section,  size  should  be  50  x  60 mm  with  32  mm  rebate.  The  corner  of the frame should be welded. The frame should   be   painted   with   one   coat   of primer  and  finished  painted  with  pure polyester  paint.  The  frame  should  be provided   with   approved   quality   butt hinges of 3 Nos.   Complete for finished item of work.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm)  outer  frame  section size of 50 x 75 mm 1 RM 225
680 MAT-01366 BMT-N.37 Supplying  & fixing  of  Door  frame  made of  roll  formed  section  of  1.25  mm  thick CRCA  section,  size  should  be  50  x  60 mm  with  32  mm  rebate.  The  corner  of the frame should be welded. The frame should   be   painted   with   one   coat   of primer  and  finished  painted  with  pure polyester  paint.  The  frame  should  be provided   with   approved   quality   butt hinges of 3 Nos.   Complete for finished item of work.: Single shutter 5'-0" x 7'-0" (1524x2133.6mm)  outer  frame  section size of 50 x 75 mm 1 RM 231
681 MAT-01367 BMT-N.38 Providing    and    fixing    door    frames fabricated    from    sections    made    of galvanized  steel  powder  coated  (base steel as per IS 513, galvanised as per IS
277  with  zinc  of  120  grams  /  square metre),  the  factory  made  section  are powder    coated   with   pure   polyester powder of 50-60 microns thick with total coated  thickness  of  1.25  mm,  size  of door  frame  section  is  of  105  x  60  mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section  filled  with  polyurethane  foam, cut  to  length,  and  joined  by  way   of welding,  each  frame  provided  with:  a) 2mm   thick   MS   powder   coated   butt hinges  of  100  mm  long  –  3  Nos.  for single shutter, 6 Nos. for double shutter.
b)  CRCA  electroplates  stiffeners  of  6 Nos.  –  3  in  each  vertical.  c)  40  mm  x 200 mm x 1.2 mm hold fasts screwed to stiffeners –  6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No
1 RM 690
682 MAT-01368 BMT-N.39 Providing   and   fixing   of   door   frames factory    made,   internal   door    frames without  threshold,  fabricated  from  pre painted cold roll formed section 100 mm x 60 mm made of galvanized (base steel as  per  IS-513  ‘D’  quality  galvanized  as per  IS-277  with  Zinc  of  120  Gms/sqm) steel  colour  coated  sections  with  total coated thickness of 1 mm primer coated with  epoxy  primer  of  5-7  microns  thick finish painted with polyester paint of 12- 16 microns  and back coated with alkyd backer of 5-7 microns, the frame section filled with polyurethane (PU Foam) of 40 kg/Cu.m  and  the  sections  cut  to  length and  mitre  joined  by  means  of 1.25  mm thick     CRCA     electroplated     corner brackets  of  size  75  x  75  mm  and  1.25 mm thick electroplated stiffeners of size 150 mm for fixing hold fasts and hinges with MS Powder coated fittings a) 6 Nos
M.S. Z Type hold fasts made of 30 mm x 3 mm MS flat of 230 mm long, 3 Nos each   size   expandable   PVC   covered screw  type  fasteners  b)  2.5  mm  x  300 mm long ‘T’ hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way but hinges (3 Nos for single  leaf or 2 Nos  for Double leaf/leaf)  c)  12  mm  dia  MS  tie  rod  at bottom  with  necessary  size  of  nuts  on either side.
1 RM 410
683 MAT-01383 BMT-N.54 Providing         &         fixing         internal prelaminated  PVC  door  frame  of  size
100  x  45  mm  with  a  wall  thickness  of 5mm,  made  of  extruded  5  mm  Prelam PVC   foam   sheet,   mitred   cut   at   two corners   and   joined   with   two   nos.   of 150mm long brackets of 15 x 15 mm MS square  tube,  two  vertical  door  profiles reinforced with 40 x  20 MS Tube of 19 guage  throughout  the  frame  and  the door   frame   fixed   to   the   wall   using 65/100mm long MS screws through the 
frame  by  using  PVC  fasteners  with  a minimum of 3 nos of screws provided for each  vertical  member  and  two  nos.  for horizontal,  etc  complete        as        per drawing     and  direction  of  Engineer  in Charge
1 RM 550
684 MAT-01401 BMT-N.72 PVC   Door   frame   made   out   of   PVC material  conforming  to  IS:10151:1982. The  door  frame  shall  be  made  from extruded     PVC    Section     in    overall dimensions  of  40mm  x  48mm  having wall  thickness  of  1.1mm  +/-0.3mm  with usual process variation corresponding to Sintex  code  number  RUPS  414.    The frame  shall  be  Reinforced  with  special polymeric   reinforcement   as   shown   in drawing to take up necessary hardware. The  corner  joint  shall  be  mitre  cut  and welded or joined by means of concealed cleats with necessary screws fittings.   A tie   rod   to   be   provided   at   bottom. [Laminated Profile] Per Rmt. 196
685   BMT-N.83 Providing  and  fixing  factory  made  solid Wood Polymer Composite (WPC) single extruded  Door  Frame  section  of  size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.    
686 MAT-05434 BMT-N.83.A Door Frame section of 45x75 MM . The two  Vertical  members  are  to  be  joined together   with   the   horizontal   member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed   control   hand   drilling   machine. The   ready/assembled   door   frame   is fixed  to  the  wall  using  hold  fast  or  bolt fasteners.   A   minimum   of   4   No.s   of screws  to  be  provided  for  each  vertical member & minimum 2no.s for horizontal member. 1 Rm 506
687 MAT-05435 BMT-N.83.B Door Frame section of 45x90 MM . The two  Vertical  members  are  to  be  joined together   with   the   horizontal   member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed   control   hand   drilling   machine. The   ready/assembled   door   frame   is fixed  to  the  wall  using  hold  fast  or  bolt fasteners.     A  minimum  of  4  No.s  of screws  to  be  provided  for  each  vertical member & minimum 2no.s for horizontal member. 1 Rm 645
688 MAT-05436 BMT-N.83.C Door  Frame  section  of  63.5x100  MM
.The  two  Vertical  members  are  to  be joined    together    with    the    horizontal member  using  8x75  MM  long  MS  Star full   thread   screws   to   be   used   with reverse   forward   speed   control   hand drilling  machine.  The  ready/assembled door frame is fixed to the wall using hold fast  or  bolt  fasteners.   A  minimum  of  4 No.s of screws to be provided for each vertical  member  &  minimum  2no.s  for horizontal member.
1 Rm 805
689 MAT-05433 BMT-N.82 Supply   and   fixing   of   factory   made Bathroom      door      frames      without threshold,   fabricated   from   pre-painted cold roll formed section 50mm x 50 mm made  of  galvanized  (base  steel  as  per IS  –  513  ‘D’  quality,  galvanized  as  per IS-277 with Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness  of  1  mm,  primer  coated  with epoxy primer of 5-7 microns thick, finish painted  with  polyester  paint  of  12-16 microns   and   back   coated   with   alkyd backer  of  5-7  microns  and  the  frame section   filled   with   polyurethane   (P.U. Foam)  of  40  Kg/Cum;  and  the sections cut to length and mitre joined by means of   1.25mm   thick   CRCA   electroplated corner brackets of size 75 x 75 mm and 1.25mm  thick  electroplated  stiffeners  of size  150mm  for  fixing  hold  fasts  and hinges  together  with  the  following  MS Power coated  fitting (Supply and fixing) of                  approved                   make.
(a) 6 Nos M.S. Z. Type hold fasts made of  30mm  x  3  mm  MS  flat  of  230mm long, 3 Nos each side expandable PVC covered       screw       type       fasteners.
(b) 2.5 mm x 300  mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )                           (c) 12 mm   Dia   MS   tie   rod   at   bottom   with necessary size of nuts on either side.
1 RM 407
    II.SUB- SECTION DOOR SHUTTERS WITHOUT FRAMES    
690 MAT-01341 BMT-N.12 Flush  door  shutters,  solid  bond  wood block board type with teak ply on both faces.:    25    mmthick    conforming    to IS:2202 1 sqm 1790
691 MAT-01342 BMT-N.13 Flush  door  shutters,  solid  bond  wood block board type with teak ply on bothfaces.:    30    mmthick    conforming    to IS:2202 1 sqm 1860
692 MAT-01343 BMT-N.14 Flush  door  shutters,  solid  bond  wood block board type with teak ply on both faces.:    35    mmthick    conforming    to IS:2202 1 sqm 2031
693 MAT-01344 BMT-N.15 Flush  door  shutters,  solid  bond  wood block  board  type  with  commercial  ply on both faces.: 25 mmthick conforming to IS:2202 1 sqm 1041
694 MAT-01345 BMT-N.16 Flush  door  shutters,  solid  bond  wood block board type with commercial ply on both  faces.:  30  mmthick  conforming  to IS:2202 1 sqm 1232
695 MAT-01346 BMT-N.17 Flush  door  shutters,  solid  bond  wood block board type with commercial ply on both  faces.:  35  mmthick  conforming  to IS:2202 1 sqm 1396
696 MAT-01347 BMT-N.18 Flush  door  shutters,  solid  bond  wood block board type with commercial ply on both  faces.:  40  mmthick  conforming  to IS:2202 1 sqm 1564
697 MAT-01348 BMT-N.19 Flush  door  shutters,  solid  bond  wood block  board  type  with  teak  veneer  on one   face   and   commercial   ply   on another   face   (lipping):   20   mmthick conforming to IS:2202 1 sqm 1960
698 MAT-01349 BMT-N.20 Flush  door  shutters,  solid  bond  wood block  board  type  with  teak  veneer  on one face and commercial ply on another face (lipping): 25 mmthick conforming to IS:2202 1 sqm 1893
699 MAT-01350 BMT-N.21 Flush  door  shutters,  solid  bond  wood block  board  type  with  teak  veneer  on one face and commercial ply on another face (lipping): 30 mmthick conforming to IS:2202 1 sqm 2096
700 MAT-01351 BMT-N.22 Flush  door  shutters,  solid  bond  wood block  board  type  with  teak  veneer  on one face and commercial ply on another face (lipping): 35 mmthick conforming to IS:2202 1 sqm 2285
701 MAT-01352 BMT-N.23 Flush  door  shutters,  solid  bond  wood block  board  type  with  teak  veneer  on one face and commercial ply on another face (lipping): 40 mmthick conforming to IS:2202 1 sqm 2612
702 MAT-01354 BMT-N.25 Supply   and   fixing   Cement   Bonded Particle Board (IS 14276) single door shutter    using    with    16MM    Cement Bonded Particle Board with all-round "U" section   of   size   12mmx18mmx12mm made  from  0.6  mm  thick  galvanized, color  quoted  cold  rolled  steel  profiles with  necessary  screws  fixed  at  every
304.8  mm  intervals.  The  cost  inclusive of MS Nickel coated Aldrops of size 255 mm  long  2  Nos.,  200  mm  long  tower bolts 1 No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost and conveyance of  all  materials  at  site  and  applying  1 coat  primer,  1  coat  of  luppum  and  2 coats  of  synthetic  enamel  paint  as  per approved   design   for   finished   item   of work.
1
Sqm
1889
703 MAT-01355 BMT-N.26 Supply  and  fixing  of  Cement  Bonded Particle      Board(IS      14276)      door shutters   using   with   16MM   Cement Bonded  Particle  Board  with  all  round style  “U”  size  of  20mmx18mm  x20mm made from 0.6mm thick galvanized pre- painted  cold  rolled  steel  profiles  with Cement      Bonded      Particle      Board separating        two        shutter        with 30mmx18mmx30mm    Stepped    lipping with necessary screws fixed at every 1’- 0”    (304.8mm)    intervals.    Ms    Nickel coated 250 mm long aldrops 2 no’s, MS powder  coated  250mm  long  tower  bolt 2no’s , & 2no’s MS powder coated 125 mm long grip handle. Including cost and conveyance  of  all  materials  at  site  and applying  one  coat  of  primer,  2  coats  of lappum and 2 coats of synthetic enamel paint    as    per    approved    design    for finished item of work. 1
Sqm
2654
704 MAT-01408 BMT-N.79 Supply and fixing of CEMENT BONDED PARTICLE     BOARD     double     door shutter     using     16     MM     CEMENT BONDED PARTICLE BOARD LAM with
all  round  “U”  section  size  of  20mm  x 18mm  x20mm  made  from  0.6mm  thick galvanized   pre-painted   cold   ro   steel profiles     with     CEMENT     BONDED PARTICLE BOARD LAM separating two shutter with 30mm x lled 20mm x  30mm stepped      lipping      with      necessary screws   fixed   at  every  1’0”  (304.8mm) intervals.   The   cost   inclusive   of   MS Nickel  coated    250mm    long    aldrops 2no’s,    MS    powder    coated    125mm long  grip  handle,  2  no’s  M.S.P.C.  Door stopper. Including cost and conveyance 
of all materials at site labor charges etc., complete finished item of work.
1
Sqm
2687
705 MAT-01359 BMT-N.30 Supply and fixing of CEMENT BONDED PRE-LAMINATED                 PARTICLE
BOARDS  door  shutter  made  out  of  U sections  of  size  12x14x12  made  from 0.6mm  thick  pps  sections  with  12MM CEMENT  BONDED  PRE-LAMINATED
PARTICLE   BOARDS   with   necessary screws   fixed   at   every   1’.0”interwells. The  hardware  consists  of  250mm  long aldrop  –  2  Nos.150mm  Handle-  1  No  , 150  mm  long  ms  powder  coated  tower bolt  1  no.  nickle  coated.  The  cost  is inclusive     of     all     incidentals,     labor transportation charges.
1
Sqm
2205
706 MAT-01392 BMT-N.63 Supply      and      fixing      of      BOARD (conforming toIS 14862) door shutter with all-round style “U” lipping size 15 x 18  x  15  mm  made  from  0.8  mm  thick powder  coated  cold  rolled  steel profiles with    16    mm    thick    V-BOARD    with necessary  screws  fixed  at  1’-0”  interval 250 mm long aldrops 2 nos. M.S. nickel coated  250  mm  long  1  no.  M.S.  Tower Bolts  Including  cost  and  conveyance  of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of    synthetic    enamel    paint    as    per approved   design   for   finished   item   of work. 1
Sqm
1350
707 MAT-01356 BMT-N.27 Supply  and  fixing  of  Cement  Bonded Particle Board (IS 14276) LAM double door  shutter  using  16  MM  CEMENT BONDED PRE-LAMINATED PARTICLE
BOARDS with all round “U” section size of  20mm  x  18mm  x  20mm  made  from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle     Board     (IS     14276)     LAM separating   two   shutter   with   30mm   x 20mm   x   30mm   stepped   lipping   with necessary  screws  fixed  at  every  1’0” (304.8mm)  intervals.  The  cost  inclusive of   MS   Nickel   coated   250mm   long aldrops    2no’s,    MS    powder    coated 125mm    long    grip    handle,    2    no’s
M.S.P.C.  Door  stopper.  Including  cost and  conveyance  of  all  materials  at  site labour  charges  etc.,  complete  finished item of work.
1
Sqm
1939
708 MAT-01376 BMT-N.47 Moulded  panel  solid  core  flush  doors using   water-resistant   hardwood   fibre HDF / MDF fibre boards skins of 2.5 mm thick   doors - 30 mm thick 1
Sqm
1637
709 MAT-01377 BMT-N.48 Moulded  panel  solid  core  flush  doors using   water-resistant   hardwood   fibre HDF / MDF fibre boards skins of 2.5 mm thick  doors - 35 mm thick 1
Sqm
1810
710 MAT-01378 BMT-N.49 Solid core  membrane flush doors using rigid PVC membrane of 0.3 mm thick of different elegant shades doors - 30 mm thick 1
Sqm
1350
711 MAT-01379 BMT-N.50 Solid core  membrane flush doors using rigid PVC membrane of 0.3 mm thick of different elegant shades doors - 35 mm thick 1
Sqm
1502
712 MAT-01335 BMT-N.06 Providing       and   fixing   35mm   thick BRAND  FACTORY  MADE  MOULDED
DOOR   SHUTTER   consisting   of   sold core  single  leaf  flush  door  of  30mm thickness,  lipped  with  15mm  (5mmX3) thick  X  30mm  width  on  one  stiles  and top  rails  and  10mm  (5mmX2)  thick  X 30mm  width  on  the  other   stiles   and bottom  rails.  The  inner  panel  laminated with   2mm   thick   termite   proof,   water proof  and  fire  resistant  moulded  Pac sheet  with  2,4,6  raised  panel  design  in different panel and / or prelam   colours on  one  side  after  routing  the  moulded design  on  flush  door  and  2mm  prelam Pac  sheet  on  other  side  using  rubber adhesive   on   flush   door   and   solvent cement  adhesive  on  Pac  lipping    etc. complete  as  per  direction  of  Engineer- in-Charge,    manufacture    specification and drawing
1 sqm 2726
713 MAT-01360 BMT-N.31 Supply   and   fixing   of   door   shutters made  of  rigid  PVC  extruded  hollow section  of  20mm  X  200  mm  with  the wall   thickness   of   1.0mm   +/-   0.1mm equally  divided  into  4  no's  with  tongue and  groove  locking  arrangements.  The shutter   frame   is   made   of   30mm   X 79mm with the wall thickness of 1.5mm
+/-0.15mm  section  mitre-cut  and  joined at  4  corners   with  125mm  X  225mm plastic  brackets.  The  shutter  shall  be horizontally   reinforced   with  2   no's   of 8mm PVC rods. Teak wood batons shall be  reinforced  inside  the  door  shutter during the fabrication of the door shutter at  those  points  wherever  the  hardware is fixed onto the door shutter.
Sqm. 1690
714 MAT-01381 BMT-N.52 Supply  &  Fixing  SOLID  STEEL  DOOR door shutter made out of G I Precoated Sheet with an average wall thickness of
0.35 mm on both sides. MS Tube having dimensions  of  19  x  19  mm  is  inserted along the hinge side of the door, core of the door shutter filled with High Density Polyurethane   foam   injected   with   the help  of  hydraulic  injection  method,  four sides   of   the   door   covered   with   G   I Precoated   Sheet   and   the   hardware locations     reinforced     with     suitable wooden   blocks   as   per   drawing   and stickers    indicating    location    of    the hardware  pasted  at  appropriate  places, etc complete
1
Sqm
1400
715 MAT-01393 BMT-N.64 Supply      and      fixing      of      BOARD (conforming toIS 14862) 12 mm thick door shutter of size 6’0” x 2’6” withall- round style “U” lipping size 15 x 14 x 15 mm  made  from  0.8  mm  thick  powder coated   cold   rolled   steel   profiles   with necessary  screws  fixed  at  1’-0”  interval 250 mm long aldrops 2 nos. M.S. nickel coated  250  mm  long  1  no.  M.S.  Tower Bolts  Including  cost  and  conveyance  of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of    synthetic    enamel    paint    as    per approved   design   for   finished   item   of work. 1
Sqm
1160
716 MAT-01397 BMT-N.68 Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet  thickness of 1.5mm .  PVC edge banding of size 0.45mm on the vertical sides.for each shutter and ISI make S.S round lock complete for finished item of work 1
Sqm
6200
    III.SUB- SECTION DOORS WITH SHUTTERS & FRAMES    
717 MAT-01331 BMT-N.02 Providing   and fixing 30mm thick Solid panel PVC door shutter consisting of frame  made  out  of  M.S.  tubes  of  19 gauge  thickness  and  size  of  19mm  x 19mm  for  stiles,  &  15mm  x  15mm  for top  &  bottom  rails.  M.S.  frame  shall have a coat of steel primers of approved make   and   manufacture.   M.S.   frame shall  be  covered  with  5mm  thick  heat moulded  PVC  ‘C’  channel  of  size  30  x 50mm  forming  stiles,  and  5mm  thick, 75mm wide PVC sheets for top rail, lock rail   &bottom  rail  on   either   side,  and 10mm  (5mm  x   2)  thick,  20mm  wide cross  PVC  sheet  as  gap  insert  for  top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm  wide  x  5mm  thick  PVC  sheet beading   on   either   side,   and   joined together  with  solvent  cement  adhesive etc.  An  additional  5mm  thick  PVC  strip of  20mm  width  is  to  be  stuck  on  the interior  side  of  the  ‘C’  Channel  using PVC solvent adhesive. Complete as per direction        of        Engineer-in-charge, manufacturer’s  specification  &  drawing for finished item of work . 1
Sqm
2270
718 MAT-01332 BMT-N.03 Providing    and    fixing    30mm    thick BRAND  FACTORY  MADE  BOTHSIDE PRELAM  SOLID  PANEL  PVC  DOOR
SHUTTER  consisting  of  frame  made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a   coat   of   steel   primers   of   approved make   and   manufacture.   MS.   Frame covered  with  5mm  thick  heat  moulded Prelam  Pac  ‘C’  channel  of  size  30mm thickness,   70mm   width   out   of   which 50mm  shall  be  flat  and  20mm  shall  be tapered   in   450   angle   on   either   side forming  stiles;  and  5mm  thick,  95mm wide  Prelam    Pac  sheet  out  of  which 75mm  shall  be  flat  and  20mm  shall  be tapered in 450 on the inner side to form top and bottom rail 115mm wide  Prelam Pac  sheet  out  of  which  75mm  shall  be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the    panel.    10mm    (5mmX2)    thick, 20mmwide  cross  Pac  sheet  shall  be provided   as   gap   insert   for   top   and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be  fitted in the MS. Frame welded/ sealed to  the stiles &  rails  with  7mm(5mm+2mm)  thick  X 15mm wide Pac sheet beading on inner side,  and  joined  together  with  solvent cement adhesive etc. an additional 5mm thick  Pac  strip  of  20mm  width  is  to  be stuck   on  the   interior   side  of  the  ‘C’ channel    using    Pac    solvent    cement adhesive etc. complete as per direction of  Engineer  –  in-charge,  manufacture specification and drawing.
1 sqm 2515
719 MAT-01333 BMT-N.04 Providing    and    fixing    30mm    thick BRAND    FACTORY    MADE    SOLID SINGLE  SIDE  PRELAM  PANEL  PVC
DOOR SHUTTER consisting of frame made  out  of  MS.  Tubes  of  19gauge thickness  and  size  of  19mmX19mm  for stiles,  and  15mmX15mm  for  top  and bottom rails. The MS. Frame shall have a   coat   of   steel   primers   of   approved make   and   manufacture.   MS.   Frame covered  with  5mm  thick  heat  moulded single  side  Prelam  Pac  ‘C’  channel  of size  30mmX50mm  to  form  stiles.5mm thick&  75mm  wide  single  side  prelim Pac sheets shall be for the top, bottom and  lock  rails.  Panelling  of  5mm  thick one  side  Pac  sheet  to  be  fitted  in  the MS.   Frame   and   sealed   to   the   front (prelam   side)   stiles   and   rails   (which should  have  a  5mm  45 bent portion as beading)      and      attached      to      the back(white/ivory)  stiles  and  rails  which should  have  a  10mm  900  bent  portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the
90  bent  beading.  All  stiles,  rails  and beadings  are  to  be  joined  to  the  panel using  solvent  cement  etc.  an  additional 5mm  thick  Pac  strip  of  20mm  width  to be  stuck  on  the  interior  side  of  the  ‘C” channel    using    Pac    solvent    cement adhesive    and    10mm(5mmX2)    thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer – in-Charge,    manufacture    specification and drawing.
1 sqm 2198
720 MAT-01336 BMT-N.07 MOULDED PVC DOOR - WOOD FREE
Providing  and  fixing  30mm  thick 
Brand factory   made   Moulded   door   shutter- wood free consisting of frame made out of  MS.  tubes  19gauge  thickness  and size of 25mmX25mm for stiles, top and bottom  rails.  MS.  Frame  shall  have  a coat  of  steel  primers.  The  inner  panel shall consist of 25mm thick High density EPS    conforming    to    IS    4671-1984 bounded  with  2mm  thick  termite  proof, water  proof  and  fire  resistant  moulded Pac sheet with 2,4,6 raised panel design in different plain and / or prelam colours after  routing  to  the  moulded  design  on one side and 2mm plain and / or prelam Pac  sheet  on  other  side  of    the  EPS. The  edge  of  panel  to  be  sealed  with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm    thickness    using    Pac    solvent cement) and stiles sides 25mm(5mmX5) thick  and  30mm  width  Pac  sheet  fitted along  Ms.  Tube  for  lock  provision  for lock height 5mm thick Pac sheet of size 150mmX100mm  fixed  with  upper  and lower  face  of  inner  side  of  EPS  Panel etc.    Complete    as    per    direction    of Engineer    –    in-Charge,    manufacture specification and drawing
1 sqm 2265
721 MAT-01337 BMT-N.08 Providing and fixing 30mm thick BRAND FACTORY  MADE  WIRE  MESH  SOLID
PVC   DOOR   SHUTTER   consisting   of frame  made  out  of  M.S.  tubes  of  19 gauge      thickness      and      size      of 19mmX19mm  for  stiles  and  15mm  for top, lock & bottom rails. MS. Frame shall have a coat of steel primers of approved make  and  manufacture.  19mmX19mm
M.S. square tubes shall be covered with 5mm   thick   heat   moulded   PVC   ‘C’ channel of size 30mm thickness, 90mm width  out  of  which  75mm  shall  be  flat and 15mm shall be flat and 15mm shall be bent in 900 on the inner side to from top  and  bottom  rail  land  130mm  wide PVC  sheet  out  of   which  100mm  shall be flat and 154mm shall be bent in 900 on    both    side    to    from    lock    rail, 10mm(5mmX2) thick, 20mm wide cross PVC  sheet  as  gap  insert  for  top  rail  & bottom  rail.  Panel  will  be  of  G.I.wire mesh  of  24gauge  to  be  fitted  in  by  ’C’ channel  of  size  35mm  X10mm  on  the either  side  in  the  stiles.  The  inner  side ‘C’  channel  is  fixed  by  19mmX19mm MS.  Tube  on  both  sides  with  screws. The wire mesh in top bottom & lock rail is  sealed  with15mm  X  15mm  tube  with G.I.wire 10mm(5mmX2) thick PVC  strip of 25mm width is to be stuck& nails on 
both  side  of  G.I.  wire  mesh  interior  at the top, bottom & lock rail. An additional 5mm thick PVC srip of 20mm width is to be stuck  on the  interior  side of   the  ‘C’ channel   using   PVC   solvent   cement adhesive etc. complete as per direction of   Engineer-in-charge,   manufacturer’s specification & drawings
1 sqm 2000
722 MAT-01394 BMT-N.65 Providing  and  fixing  frame  made  from
1.2 mm powder coated cold rolled steel profiles of overall section size of 60 mm x  45  mm  with  21  mm  rivet  for  shutter with   necessary   stiffeners   hinges   and screws. BOARD (IS 14862) shutter with all-round style “U” lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA powder coated steel profile with 16 mm thick   V-board   with   necessary   screws fixed at every 1’-0” interval 250 mm long aldrops  2  nos.  M.S.  nickel  coated  250 mm   long   1   no.   M.S.   Tower   Bolts Including   cost   and   conveyance.   One coat of primer, 2 coats of luppum and 2 coats  of  synthetic  enamel  paint  as  per approved colour, labour charges etc.
1
Sqm
1600
723 MAT-01357 BMT-N.28 Providing   and   fixing   of   door   frame made   from   cold   roll   formed   sections made  of  galvanized  (Base  steel  as  per IS277 with zinc of 120 Gms/sqm) colour coated  steel  sections  with  total  coated thickness  of  1mm,  primer  coated  with epoxy primer  coat  of 5-7  microns thick, finish paint with polyester paint of 12-16 microns.  The  Section  for  door  frame  is to be filled with polyurethane (P.U) form of   40kg/m3.   Overall   size   of   frame section  should  be  of  50mm  x  50mm. With     necessary     corner     brackets, stiffeners,  hinges,  and  screws.  Cement Bonded  particle  board  shutter    “Single Leaf” with all round styles “U” section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled   steel   profiles   with   16mm   thick Cement  Bonded  particle  Board     with necessary  screws  fixed  at  every  1’-0” (304.8mm)  intervals.  The  cost  inclusive of   MS   nickel   coated   Aldrop   of   size 250mm  long  2nos.  200mm  long  tower bolt  1no.,  125mm  handles  2nos.,  cost and  conveyance  of  all  materials  at  site and applying one  coat primer , one coat of  luppum  and  two  coats  of  synthetic enamel  paint    as  per  approved  design for finished item of work 1
Sqm
3488
      DOORS FRAMES (COLOUR COATED STEEL     SECTIONS)     &     SHUTTER USING  CEMENT  BONDED  PARTICLE BOARD AS PER IS 14276:    
724
TO 727
  BMT-N.40 to BMT-N.43 ITEM DELETED    
728 MAT-01373 BMT-N.44 Supplying and fixing door shutter, with shutter  frame  and  infill  panel  made from  PVC  material  conforming  to  IS: 10151-1982, the shutter frame made out of PVC extruded sections having overall dimension of 47 mm x 33 mm with wall thickness of 1.2mm + 0.3mm with usual process variation, the shutter frame with tapered  shape  to  provide  better  grip  to the infill panel end to drain out the water The  Infill  panel  is  made  out  of  PVC Sections  having  Overall  Dimensions  of 200 mm x 20 mm with wall thickness of 1mm + 0.2mm, the shutter frames mitre cut    and    joined    at    the    corner,    by providing Polymeric “ L” type corners to take  hardware  &  fixtures  fixed  with  10- 20mm    counter    sunk    fully    threaded parallel   shank   steel   screws,   all   the hardware    locations    reinforced    with special polymeric bars as per drawings, stickers  showing  locations  of  different hardware pasted on the shutter, the infill panels   joined   by   tongue   and   groove method. 1
Sqm
910
729 MAT-01374 BMT-N.45 Providing  &  Fixing  of  Scientific  Doors with    metal    door    frames    and    door shutters  made  of  galvanize  steel  (base steel as per IS 513 of 0.58 mm thick D quality,  galvanized  as  per  IS  277  with Zinc   of   120   GSM)coated   with   Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance        and        durability/Epoxy polyester   powder   for   powder   coating paint  thickness  50-60  microns  (Dry  film thickness) outer frame section of  100 x 58 mm x 1.2 mm thick, shutter section of
0.80  mm  thick  galvanized  steel  sheet pressed  (roll  formed)  for  46mm  thick fully  flush, double  skin  door  shell seam joints at stile edges, in-fill of honeycomb kraft  paper  used  to  give  the  required rigidity  and  effective  acoustic  insulation with  6” Tower bolt – 1 No., 6” D handles
–  2  Nos.,    10”  Aldrop  –  1  No.,  Butt Hinges   –   3   Nos,      Mortise   Lock   of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self   expanding   screws   complete   for finished item of work for Single leaf Door
1
Sqm
9348
730 MAT-01375 BMT-N.46 Providing  &  Fixing  of  Scientific  Doors with    metal    door    frames    and    door shutters  made  of  galvanize  steel  (base steel as per IS 513 of 0.58 mm thick D quality,  galvanized  as  per  IS  277  with Zinc  of  120  GSM).  coated  with  Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance        and        durability/Epoxy polyester   powder   for   powder   coating paint  thickness  50-60  microns  (Dry  film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
0.80  mm  thick  galvanized  steel  sheet pressed  (roll  formed)  for  46mm  thick fully  flush, double  skin  door  shell  seam joints at stile edges, in-fill of honeycomb kraft  paper  used  to  give  the  required rigidity  and  effective  acoustic  insulation with     6”  Tower  bolt  –  2  Nos.,  6”  D handles  –  2  Nos.,   10”  Aldrop  –  1  No., Butt  Hinges  –  6  Nos,   Mortise  Lock  of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self   expanding   screws   complete   for finished  item  of  work  for  Double  leaf Door
1
Sqm
9971
731 MAT-01380 BMT-N.51 Providing  &  fixing  30  mm  thick  solid panel PVC door shutter consisting of frame  made  out  of  19 guage  M.S tube of  19  x  19  mm  for  stiles,  top  &  bottom rail,  with  a  coat  of   primer  of  approved make.  M.S. Frame covered  with 5 mm thick heat moulded PVC “C” channel of size  of  30  x  50  mm   forming   stiles,  5 mm  thick  75  mm  wide  PVC  sheet  for top, lock & bottom rail on either side  20 mm wide cross PVC sheet as gap insert for   top   &   bottom   rail,   panelling   of 10mm(+/-)(    5mm+5mm)”    thick    PVC sheet  fitted  in  the  M.S.  frame  welded
/sealed   to   the   stiles,   on   either   side joined   together   with   solvent   cement adhesive   etc.,   additional   5   mm   thick 
PVC strip of 20 mm width stuck on the interior   side   of   the   C   channel   using solvent    cement,    complete    as    per direction       of       Engineer–in–charge, manufacturers specification.
1
Sqm
2750
732 MAT-01382 BMT-N.53 Supplying  &  fixing  SINGLE  PANEL  30 mm  thick  PVC  DOOR,  door  shutters with   shutter   frame   and   Infill   panel made  from  PVC  material,  the  shutter frame   made   out   of   PVC   extruded sections having overall dimensions of 6 0mm x 30 mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered seamless hollow PVC   extruded   panel   having   overall dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the shutter  frame  meter  cut  and  joined  at corners  and  all  the  hardware  locations reinforced  with  special  polymeric  bars as    per    drawing    including    providing special  PVC  braket  on  hinge  side,  etc complete 1
Sqm
2350
733 MAT-01384 BMT-N.55 Supply & Fixing of Powder Coated Mild Steel  doors, frames  &  shutters  made of     Skin  pass   galvanized  Iron  sheet conforming to Base Steel as per IS 513 “D”  Quality,  Galvanized  as  per  IS  277 with  Hot  Zinc  Coating  of  120  grams  / Sq.Mtr with powder coating  of thickness 60-65  Microns,  frame  with  1.2mm  thick Skin pass Galvanized Iron sheet formed to single rebate profile of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam,  the  Door  Shutters  are  with  0.80 mm  thick   Skin  pass   Galvanized   Iron Sheet formed to provide a 46 mm thick fully  flush,  double  skin  door  shell  with Lock  Seam  joints  at  stile  edges,  fitted with  in-fill  of  Honeycomb  Kraft  Paper and  coated  with  polyester   powders  of Pure    polyester/    epoxy    polyester    or polyurethane powder for powder coating of  thickness  60  –  65  microns  and  are coated  with  Zinc  Phosphate  Primer  to receive any paint on site or finished with Thermosetting   Polyurethane   paint   of Aliphatic  Grade  providing  high  levels  of scratch   resistance   and   durability,   the Shutter  provided  with  6  MM  clear  float vision   glass   in   Circular,   Square   or Rectangular   shapes,   Stainless   Steel Ball  Bearing  Butt  Hinges  3  mm  thick fixed   flush   to   the   frame   and   shutter (Profile     102x76x3mm     thick).Mortise Sash  Lock  with Lever  Handles,  Mortise Dead Bolt, etc for industrial, commercial, residential, cleanroom applications 1
Sqm
9902
734 MAT-01385 BMT-N.56 Supply   &   Fixing   of   Stainless   steel doors,   frames   &   shutters   made   of stainless   steel   grade   304   of   hairline finish, frame with 1.2mm thick formed to single rebate profile of ize 100 mm X 58 mm  and  filled  with  in-fill  Polyurethane foam,  the  Door  Shutters  are  with  0.80 mm  thick  Stainless  steel  Sheet  formed to  provide  a  46  mm  thick  fully  flush, double  skin  door  shell  with  Lock  Seam joints  at  stile  edges,  fitted  with  in-fill  of Honeycomb   Kraft   Paper,   the   Shutter provided  with  6  MM  clear  float  vision glass in Circular, Square or Rectangular shapes,   Stainless   Steel   Ball   Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise   Sash   Lock   with   Lever Handles,   Mortise   Dead   Bolt,   etc   for industrial,      commercial,      residential, cleanroom applications. 1
Sqm
18566
735 MAT-01386 BMT-N.57 Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of     Skin  pass   galvanized  Iron  sheet conforming to Base Steel as per IS 513 “D”  Quality,  Galvanized  as  per  IS  277 with  Hot  Zinc  Coating  of  120  grams  / Sq.Mtr with powder coating  of thickness 60-65  Microns,  frame  with  1.2mm  thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of
1.4     mm     and     filled     with     in-fill Polyurethane  foam,  the  Door  Shutters are   with   0.80   mm   thick   Skin   pass Galvanized Iron Sheet formed to provide a  46  mm  thick  fully  flush,  double  skin door shell with Lock Seam joints at stile edges,  fitted  with  in-fill  of  Honeycomb Kraft  Paper  and  coated  with  polyester powders    of    Pure    polyester/    epoxy polyester   or   polyurethane   powder   for powder  coating    of  thickness  60  –  65 microns   and   are      coated   with   Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance   and   durability,   the   Shutter provided  with  6  MM  clear  float  vision 
glass in Circular, Square or Rectangular shapes,   Stainless   Steel   Ball   Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise   Sash   Lock   with   Lever Handles, Mortise Dead Bolt, etc for 120 minutes  Fire  Rated  door  conforming  to IS:3614 (Part2) 1992
1
Sqm
11758
736 MAT-01387 BMT-N.58 Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of     Skin  pass   galvanized  Iron  sheet conforming to Base Steel as per IS 513 “D”  Quality,  Galvanized  as  per  IS  277 with  Hot  Zinc  Coating  of  120  grams  / Sq.Mtr with powder coating  of thickness 60-65  Microns,  frame  with  1.2mm  thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of
1.4     mm     and     filled     with     in-fill Polyurethane  foam,  the  Door  Shutters are   with   0.80   mm   thick   Skin   pass Galvanized Iron Sheet formed to provide a  46  mm  thick  fully  flush,  double  skin door shell with Lock Seam joints at stile edges,  fitted  with  in-fill  of  Honeycomb Kraft  Paper  and  coated  with  polyester powders    of    Pure    polyester/    epoxy polyester   or   polyurethane   powder   for powder  coating    of  thickness  60  –  65 microns   and   are      coated   with   Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance   and   durability,   the   Shutter provided  with  6  MM  clear  float  vision glass in Circular, Square or Rectangular shapes,   Stainless   Steel   Ball   Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise   Sash   Lock   with   Lever Handles,  Mortise  Dead  Bolt,  etc  for  60 minutes  Fire  Rated  door  conforming  to
IS:3614 (Part2) 1992
1
Sqm
11140
737 MAT-01388 BMT-N.59 Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of   Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel  of  304  grade  hairline  finish  sheet formed  to  double  rebate  profile  of  ize
143   mm   X   58   mm   with   maximum bending radius of 1.4 mm and filled with in-fill    Polyurethane    foam,    the    Door 
Shutters    are    with    0.80    mm    thick Stainless   steel   of   304   grade   hairline finish Sheet formed to provide a 46 mm thick  fully  flush,  double  skin  door  shell with  Lock  Seam  joints  at  stile  edges, fitted   with   in-fill   of   Honeycomb   Kraft Paper    and    coated    with    polyester powders    of    Pure    polyester/    epoxy polyester   or   polyurethane   powder   for powder  coating    of  thickness  60  –  65 microns   and   are      coated   with   Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance   and   durability,   the   Shutter provided  with  6  MM  clear  float  vision glass in Circular, Square or Rectangular shapes,   Stainless   Steel   Ball   Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise   Sash   Lock   with   Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire  Rated  door  conforming  to IS:3614 (Part2) 1992
1
Sqm
17681
738 MAT-01389 BMT-N.60 Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of   Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel  of  304  grade  hairline  finish  sheet formed  to  double  rebate  profile  of  ize
143   mm   X   58   mm   with   maximum bending radius of 1.4 mm and filled with in-fill    Polyurethane    foam,    the    Door Shutters    are    with    0.80    mm    thick Stainless   steel   of   304   grade   hairline finish Sheet formed to provide a 46 mm thick  fully  flush,  double  skin  door  shell with  Lock  Seam  joints  at  stile  edges, fitted   with   in-fill   of   Honeycomb   Kraft Paper    and    coated    with    polyester powders    of    Pure    polyester/    epoxy polyester   or   polyurethane   powder   for powder  coating    of  thickness  60  –  65 microns   and   are      coated   with   Zinc Phosphate  Primer  to  receive  any  paint on  site  or  finished  with  Thermosetting Polyurethane  paint  of  Aliphatic  Grade providing     high     levels     of     scratch resistance   and   durability,   the   Shutter provided  with  6  MM  clear  float  vision glass in Circular, Square or Rectangular shapes,   Stainless   Steel   Ball   Bearing Butt Hinges 3 mm thick fixed flush to the 
frame and shutter (Profile 102x76x3mm thick).Mortise   Sash   Lock   with   Lever Handles,  Mortise  Dead  Bolt,  etc  for  60 minutes  Fire  Rated  door  conforming  to IS:3614 (Part2) 1992
1
Sqm
16186
739 MAT-01390 BMT-N.61 Supply  &  Fixing  of  Lead  Lined  Clean room   doors   frames   and   shutters made  of     Skin  pass  galvanized  Iron sheet (Conform to Base Steel as per IS
513  “D”  Quality,  Galvanized  as  per 
IS 277 with Hot Zinc Coating of 120 grams
/    Sq.Mtr).with    powder    coating       of thickness    60-65    Microns,    frame    of 1.60mm    thick  galvanized  steel  sheet (Conform    to   
IS    277)    formed    to Single/double   rebate   profile   of   size 100mm   X   58mm/   143x58mm,   door frames  with  a  single  /  multi  Layer  of Lead sheet varying thickness from 3mm
/1mm   to   2mm   depends   on   radiation level,   the   shutter   with   1.2   mm   thick Galvanized  Steel  Sheet  (Conform  to 
IS
277
)  formed  to  provide  a  46mm  thick fully  flush,  double  skin  door  shell  with Lock  Seam  joints  at  stile  edges  with  a single   /   multi   Layer   of   Lead   sheet varying  thickness  from  3mm  /1mm  to 2mm  depends  on    radiation  level,  the lead  sheets  extend  the  full  width  and height  of  the  door,  Lead  thickness  is equal  to  the  shielding  in  the  adjacent wall, the door frames and door shutters are  coated  with  polyester    powders  of Pure    polyester/    epoxy    polyester    or polyurethane powder for powder coating of  thickness  60  –  65  microns,  coated with  Zinc  Phosphate  Primer  to  receive any   paint   on   site   or   finished   with Thermosetting   Polyurethane   paint   of Aliphatic  Grade  providing  high  levels  of scratch     resistance     and     durability, hardware    with    Stainless    Steel    Ball Bearing  Butt  Hinges  3  mm  thick  fixed flush   to   the   frame   and   shutter   etc complete for finished item
1
Sqm
13329
740 MAT-01391 BMT-N.62 Supply    &    Fixing    of    Lead    Lined Stainless   steel   Clean    room    door frames     and     shutters     made     of Stainless   steel   grade   of   304   hairline finish,   frame   with   1.60mm   (16SWG) thick hairline finish Stainless steel grade of  304  formed  to  Single/double  rebate profile  of  size  100  mm  x  58mm/  143  x 58 mm, door frames with a single / multi Layer  of  Lead  sheet  varying  thickness from  3mm  /1mm  to  2mm  depends  on radiation  level,  the  shutter  with  1.2  mm thick hairline finish Stainless steel grade of 304 formed to provide  a 46mm thick fully  flush,  double  skin  door  shell  with Lock  Seam  joints  at  stile  edges  with  a single   /   multi   Layer   of   Lead   sheet varying  thickness  from  3mm  /1mm  to 2mm  depends  on    radiation  level.  The lead  sheets  extend  the  full  width  and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall.  Hardware  can  be  provided  with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc complete for fisnihed item of work 1
Sqm
21041
741 MAT-01395 BMT-N.66 ITEM DELETED    
742 MAT-01396 BMT-N.67 A) Specification for Foamed PVC Door Frame & ABS Shutters:  Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long screw.  The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 no's  to be provided for each vertical member,GI stiffners of ("U" chanel of size 29x9x1mm, 150mm long) -3 no's  at hinge point,Frame reinforcement of("U" GI chanel of size 46x22x.06mm),Bottom tie rod of ("U" GI chanel size of 15x15x1mm) etc. complete as per manufacturers specification for finished item of work.   Maximum door frame size : 980 x 2070  .                              B) Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet  thickness of 1.5mm .  PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock completes for finished item of work. Maximum shutter size of : 910 x 2030 mm Each 14189
743 MAT-01398 BMT-N.69 Supply  and  fixing  of  Bath  room  /  Toilet door  shutter  with  16mm  laminated  (IS 14276)  door  shutter  with  all-round  ‘U’ lipping  of  PPS  section  of  size  12mm  X 18mmX 12mmX0.6mm thickness with a hardware  of  12mm  dia  X200mm  long aluminum aldrop – 2 nos( ISI make)2 No of  125mm  long  handles(ISI  make)  and also 3 no   Of IS304 grade Patee Hinges 3mmX12mmX180mm   long   with   pole receiver of 10mm dia pole X40mm long welded  on  2mm  X40mm(ss304)  plates works  as  receiver  for  RT  patte  hinges. The price inclusive of all material at site 1
Sqm
2265
744 MAT-01399 BMT-N.70 Supply  and  fixing  of  toilet  door  shutter with frame made  of M.S.  door frame of 5mmX48mmX48mm   (L   angel)   as   all- round  frame  the  frame  is  coated  with one coat  of red oxide and two coats  of enamel  of  approved  color.  For  shutter and  the  shutter  is  made  with  16mm laminatedshutter     with     all-round     ‘U’ Lipping       of       PPS       section       of 12mmX18mmX12mmX0.60mm,     along hardware  of  200m  long  and  12mm  dia aluminum aldrop( ISI make)2 Nos, 2Nos of   125m  m  handle,  3  Nos  of RT  patte hinges            IS            304gr            SS 2mmX12mmX180mm  long  with  a  pole receiver   of   10mmDia   X   40mm   by welded on 3mmX40mm SS 304, plate it works as receiver for RT Patee   hinges it  is  welded  to  M.S.  angle  .  M.S.  angle will  be  fixed  to  wall  of  self  expandable screws and caps. 1
Sqm
3230
745 MAT-01402 BMT-N.73 Door shutter with shutter frame and Infill panel     made     from     PVC     material conforming   to   IS:   10151:1982.   The shutter   frame   is   made   out   of   PVC extruded     sections     having     overall dimensions of 100mm X 30mm, with two self extruded grooves at 40mm & 50mm on front surface. The Infill panel is made out of multi chambered seamless hollow PVC   extruded   panel   having   overall dimensions  of  610  mm  X  20  mm.  The shutter  frame  shall  be  meter  cut  and joined  at  corners  by  means  of  plastic brackets.  Stickers  showing  locations  of different hardware will be pasted on the shutter.  ALL Dimensions are in MM. Sqm. 960
746 MAT-01403 BMT-N.74 The  shutter  frame  made  out  of  PVC extruede      section      having      overall dimensions  of  59mm  x  24mm with  wall thickness of 1.0mm +/-0.3mm with usual process  variation  corresponding  to  the Sintex    Code    No.DWUF-302.        The shutter  frame  is  given  tampered  shape to  provide  better  grip  to  the  infill  panel and   to   drain   out   the   water.The   infill panel   is   made   out   of  seamless   one piece  multi  chambered  PVC  extruded section   having   overall   dimension   of 610mm  x  20mm  with  wall  thickness  of 1mm   +/-0.2mm   with   usual   process variation   corresponding   to   the   Sintex code  No.SPUF-128.  The  shutter  frame shall  be  mitre  cut  and  joined  at  the corner  polymeric  “L’  Type  corners  shall be  provided  at  the  corners  to  take  up hardwares  & fixtures and shall be fixed with   19   x   8mm   counter   sunk-fully threaded  parallel  shank  steel  screws. All   the   hardware   locations   shall   be reinforced with special polymeric Bars. 1
Sqm
1924
747 to
750
  BMT-N.75 to BMT-N.78 ITEMs DELETED    
751 MAT-01338 BMT-N.09 Providing and fixing   PVC door cladding to  the flush doors shutters . For the new doors  it  shall  be  pasted  with  Fevicol SSR  998  or  nailed  to  the  old  doors. complete as per direction of Engineer – in – charge, manufacturers specification and drawing - 1 mm thick 1 sqm 350
752 MAT-01339 BMT-N.10 Providing and fixing   PVC door cladding to  the flush doors shutters . For the new doors  it  shall  be  pasted  with  Fevicol SSR  998  or  nailed  to  the  old  doors. complete as per direction of Engineer – in – charge, manufacturers specification and drawing - 1.5  mm thick 1 sqm 375
753 MAT-01340 BMT-N.11 Providing and fixing   PVC door cladding to  the flush doors shutters . For the new doors  it  shall  be  pasted  with  Fevicol SSR  998  or  nailed  to  the  old  doors. complete as per direction of Engineer – in – charge, manufacturers specification and drawing - 2.0 mm thick 1 sqm 431
754   BMT-N.84 Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side
of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc.
Profile of frame & sash shall be mitred cut andfusion
welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall
be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive  of cost of  Single / double glass panes and silicon sealent .
Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
   
755 MAT-05437 BMT-N.84.A Casement door with 3D hinges made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double   glazing   bead   of   appropriate dimension.   (Area   of   door   upto   2.00 sqm).
1 sqm 8217
756 MAT-05438 BMT-N.84.B Casement door with top hung ventilator with  3D  and  S.S.  frictionhinges  (400  x 19 x 1.9 mm) made of (big series) frame 67  x  64  mm,  sash  67  x  110  mm  & mullion  67  x  80  mm  all  having  wall thickness  of  2.3  ±.  0.2  mm  and  single glazing  bead  /  double  glazing  bead  of appropriate dimension.(Area of doorupto
2.50 sqm)
1 sqm 8395
757   BMT-N.85 Providing and fixing factory made uPVC white colour sliding glazed doorcomprising of uPVC multi- chambered frame with in-built roller track andsash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVCextruded glazing beads, uPVC extruded interlock and uPVC extrudedInline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmissiongear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body with adjustable doublenylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x
8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion weldedat all corners, including drilling of holes for fixing hardware's and drainageof water etc. After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive  of cost of  Single / double glass panes,wire mesh and silicon sealent .
Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variationin profile dimension in higher side shall be accepted but no extra
payment on this account shall be 
made.
   
758 MAT-05439 BMT-N.85.A Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thicknessof
2.3 ± 0.2 mm and single glazing bead / double    glazingbead    of    appropriate dimension.  (Area  of  door  above  2.00 sqm upto 5.00 sqm)
1 sqm 5404
759 MAT-05440 BMT-N.85.B Three  track  three  panels  sliding  door with         fly         proof         S.S         wire mesh  (Two  nos.  glazed  &  one  no. wire mesh panels) made of(big series) frame 116 x 45 mm & sash 46 x 82 mm both having  wall  thickness  of  2.3  ±  0.2  mm and                   single                   glazing bead     /     double    glazing    bead     of appropriate          dimension.          (Area of  door above 2.00 sqm upto 5.00 sqm) 1 sqm 6996
760 MAT-05441 BMT-N.86 Providing  and  fixing  of  factory  made  of High   Density   High   MoistureResistant Wood   Fibre   (HDHMR)   single   shutter Duradoor  made  up  of  FRAME:  Door frame  manufactured  with  High  Density High    MoistureResistant    Wood    Fibre (HDHMR)   of   36mm   width   x   100mm depth , laminated with 0.2mm thick PVC Foil  using  hot  press  andPUR  adhesive, fitted  with  Gasket  for  energy  efficiency and  noise  protection,affixed  to  the  wall using   high   strength   expandable   PU Foam/     self-expandable     wall     fixing screws.Max  dimensions  in  MM  of  280 (depth)    x    2440    (height)SHUTTER: Factory    made    41mm    thick    shutter sandwiched   with   High   Density   High Moisture         ResistantWood         Fibre (HDHMR)  of  5.5mm  thick  skinson  both sides  and  HDHMR  of  30mm  thickness as  skeleton,core  of  high  density  Honey Comb  and  Laminated  Veneer  Lumber (LVL)    for    holding    the    lock    body andhardware,   laminated   with   0.2mm thick  PVC  Foil  and  edge-banded  with 1mm   thick   PVCedge-band   using   hot press     and     PUR     adhesives.     Max dimensions  in  MM  of  1200  (width)  x 41(thickness)       x       2400       (height), ARCHITRAVE:          Factory          made Architrave  of  size  80mm  x  12mm  fitted to  pre-made  grooves  within  the  frame for     addedaesthetics.     Four     design variants  available,  made  with  Density High      Moisture      Resistant      Wood Fibre(HDHMR)  of  different  thicknesses depending    on    the    design    variant, laminated   with   0.2mm   thickPVC   Foil using   hot   press   and   PUR   adhesive, fitted   to   the   wall   using   strong   quick actingadhesives.
HARDWARE       &       ACCESSORIES:
Imported     hardware     including     door handles – 1 no, cylindrical magnetic lock
-1 no ,SS hinges – 3 nos. Including cost and     conveyance     of     all     material, Hardware,      Labour      charges      and transportation       complete  for  finished item of work
1 sqm 11249
761 MAT-05442 BMT-N.87 Supply  and  fixing  of  Bath/Toilet  Door frame and shutter with  8mm laminated (IS.15786)using                                 with
50mmx35mmx1.3mmthick       aluminum door  frame  of  weight  220grm  per  Rft with a rebate of 30 mm for provision for shutter       ,       shutter       made       with 45mmx25mmx1.3mm    thick    aluminum section  of  weight  210grms  per  Rft  with 8mm   groove   to   accommodate   8mm thick 
laminated  (IS.15786)  and  shutter having  3nos  of ss  304gr  Butt hinges  of 100mm long, 100mm aluminum handles
-2nos, and also 2 nos of 200mmx12mm aluminum aldrops ,the rates inclusive of all  labor  fixing  at  site  and  50microns Ivory powder coated for aluminum  door frame and shutter sections etc complete finished item of work .
1 sqm 4872
762 MAT-05443 BMT-N.88 Providing  and  fixing     28  -30  MM  thick solid  Wood  Polymer  Composite(WPC) single  extruded  door  shutter  with  3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame 1 sqm 3030
    IV.SUB- SECTION CUP-BOARD DOORS    
763 MAT-01353 BMT-N.24 Supply  and  fixing  of  Cement  Bonded Particle  Board  (IS  14276)  cup  board frames  and  shutters   and  using  16mm Cement   Bonded   Particle   Board   duly painted   both   sides   with   one   coat   of primer   and   two   coats   of   synthetic   / enamel  paint  of  approved  shade  and brand  including  fixing  of  hardware  like
M.S.  powder  coated  Piano  hinges  of size 18mm x 18mm, brass ball catches, 
Aluminum   tower   bolts   and   handles   , Godrej  locks,  Fevicol,  screws  and  nails including  cost  and  conveyance  of  all materials,  labor  charges,  all  incidental and  operational  charges  etc.,  complete for  finished  item  of  work  at  site  as  per the directions of Engineer in Charge.
1 sqm 2210
764 MAT-01358 BMT-N.29 Supply  and  fixing  of  Cement  Bonded Particle  Board (IS 14276)  box type cup board   using  Cement  Bonded   Particle Board  for making frame of size 100mm x  35mm  using  two  sandwiched  16MM boards,  one  Cement  Bonded  Particle Board   and   one   CEMENT   BONDED PRE-LAMINATED PARTICLE BOARDS
with   plain   35mm   wood   lipping.   The Shutters   are   made   of   16MM   thick CEMENT   BONDED   PRE-LAMINATED
PARTICLE    BOARDS    (Pre-Laminated Cement   Bonded   Particle    Board)    of approved  shade  inclusive  of  hardware like M.S. powder coated Piano hinges of size ¾” x ¾” , Aluminum powder coated handles of size 4” (101.6mm), Aluminum tower  bolt  4”  (101.6mm)  Godrej  locks, screws,  wood  lipping  and  Fevicol  etc., complete finish item of work.
1
Sqm
3540
765 MAT-01400 BMT-N.71 Supply  and  fixing  of  cupboard  shutter using teakwood scantling of size 50mm X50mm  teakwood  as  outer  frame  and 50mm  X  30  mm  of  size  teakwood  for shutter  frames  ,  8mm  thick  Bison  Lam as  panel    to  each  shutter  consist  of  2 Nos  75mm  long  tower  bolt  –  2  nos  75 mm big handle the and other shutter will have 1 no of  cupboard lack , 1 No of 75 mm long handle and 75mm10mmX1mm thick SS hinges- 2 Nos for each shutter. The above frame will be fixed to the wall with    screws,    the    rate    inclusive    of screws, handle, etc., complete at site of work. 1
Sqm
3710
    P.SECTION WINDOWS
(Landing cost – including loading, cost of conveyance, unloading)
   
    I.SUB- SECTION OPENABLE WINDOWS    
      Supply and fixing of pre-painted steel openable  windows   base  steel  as  per IS  513  of  -0.58  mm  thick  'D"  quality, galvanized as per IS 277 , finish painted with  a  polyester  paint  of  12-16  microns thick and back coated with 5-7 microns thick   alkyd   backer,   section   for   outer frame  of  46  x  52  mm  section  and  for shutter   of   46   x   46   mm   section   for mullion  46  x  70  mm,  and  section  for beading should be 18 x 25 mm   with 5 mm  thick  plain  float  glass    fitted  with Ethyl    propylene    Diamine    monomer Gasket  (EPDM)  and    handle  made  of high  grade  aluminium  powder  coated with    frames    fixed    to    the    concrete
/masonry    wall    by    means    of    self expanding   screws   including   10   mm square    guard    bars    with    6"    pitch complete for finished item of work
   
766 MAT-01409 BMT-P.01 Windows:   Single   shutter   2'0   x   4'0 (609.6   x   1219.2   mm   )   Outer   frame section  size  of  46  x  52  mm  shutter frame section size of 46 x 46 mm 1 sqm 5742
767 MAT-01410 BMT-P.02 Windows:  Double  shutter    3'-0"  x  4'-0" (914.4mm  x  1219.2  mm)  outer  frame section  size  of    46  x  52  mm  shutter frame section size of 46 x 46 mm 1
Sqm
5742
768 MAT-01411 BMT-P.03 Windows:  Double  shutter  3'-0"  x  4'-0" (914.4mm  x  1219.2  mm)  outer  frame section  size  of    46  x  52  mm  shutter frame   section   size   of   46   x   46   mm Mullion section size of 46 x 70 mm 1
Sqm
6074
769 MAT-01412 BMT-P.04 Windows:  Double  shutter  4'-0"  x  4  '-0" (1219.2x12.19.2mm)       outer       frame section  size  of    46  x  52  mm  shutter frame section size of  46 x 46 mm 1
Sqm
5907
770 MAT-01413 BMT-P.05 Windows:  Double  shutter  4'-0"  x  4  '-0" (1219.2x1219.2mm)          outer     frame section  size  of  46  x  52  mm  shutter frame  section  size  of     46  x  46  mm Mullion section size of 46 x 70 mm 1
Sqm
5907
771 MAT-01414 BMT-P.06 Windows:  Double  shutter  4'-6"  x  4  '-6" (1371.6x1371.6mm) outer frame section size   of   46   x   52   mm   shutter   frame section  size  of    46  x  46  mm  Mullion section size of 46 x 70 mm 1
Sqm
5411
772 MAT-01415 BMT-P.07 Windows:    Centre    fixed    both    side openable     shutter         5'-0"     x     4'-0" (1524x1219.2mm)  outer  frame  section size  of    46    x  52  mm  shutter  frame section  size  of  46  x  46  mm  Mullion section   size   of   46   x   70   mm   fixed beading section size of 18 x 25 mm 1
Sqm
5411
773 MAT-01416 BMT-P.08 Windows:    Centre    fixed    both    side openable     shutter         6'-0"     x     4'-0"(1828.8x1219.2mm) outer frame section size  of    46    x  52  mm  shutter  frame section  size  of  46  x  46  mm  Mullion section   size   of   46   x   70   mm   fixed beading section size of 18 x 25 mm 1
Sqm
5411
774 MAT-01417 BMT-P.09 Windows:    Centre    fixed    both    side openable     shutter         6'-0"     x     4'-6" (1828.8x1371.6mm) outer frame section size  of    46    x  52  mm  shutter  frame section  size  of  46  x  46  mm  Mullion section   size   of   46   x   70   mm   fixed beading section size of 18 x 25 mm 1
Sqm
5411
      Providing    and    fixing    of    Openable Windows   made   of   pre-painted   steel (Base  steel  as  per  IS  513  of  0.58  mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer   of   5-7   microns   thick,   finish painted  with  a  polyester  paint  of  12-16 microns thick and back coated with 5-7 microns  thick  alkyd  backer  and  section for  outer  frame  of  48  x  50  mm,  centre mullion   of   48   x   50   mm,   section   for shutter  of  48  x  25  mm  and  the  fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm  provision  for  guard  bars/grills  and the  sections  cut  to  length  metre  joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless  steel  heavy  duty  pivot  hinges provided per shutter and windows fitted with  5  mm  thick  plain  float  glass  with rubber    gaskets    including    fixing    the frames   in   concrete/masonry   wall   by means   of       self   expanding   screws, Including 10mm Square guard bars with 6”  (152.4mm)  pitch  etc.,  complete  for finished item of work.    
775 MAT-01424 BMT-P.16 Single      shutter      Window      2’0”x4’0” (609.6mm  x  1219.2mm).    Outer  frame section  size  of  48x50mm  shutter  frame section size of 48 x 25 mm. 1
Sqm
5245
776 MAT-01425 BMT-P.17 Double   shutter   Window   with   vertical mullion    3’0”    x    4’0”    (    914.4mm    x 1219.2mm)  outer  frame  section  size  of 48x50mm  shutter  frame  section  size  of
48  x  25  mm.    Mullion  section  size  of 48x50mm.
1
Sqm
5576
777 MAT-01426 BMT-P.18 Double   shutter   Window   with   vertical member4’0”    x    4’0”    (1219.2mm    x 1
Sqm
5576
      1219.2mm)  outer  frame  section  size  of 48x50mm  shutter  frame  section  size  of 48 x 25 mm and mullion section should be of 48x50mm.    
778 MAT-01427 BMT-P.19 Centre fixed both side openable shutter window            5’0”x4’0”            (1524mm x1219.2mm).   Outer  frame  section  size of 48x50mm.  Shutter frame section size of 48 x 25 mm.   Mullion section size of 48x50mm.   Fixed  beading  section  size of 12x12mm. 1
Sqm
4914
779 MAT-01428 BMT-P.20 Centre fixed both side openable shutter window          6’0”x4’0”          (1828.8mm x1219.2mm).   Outer  frame  section  size of 48x50mm.  Shutter frame section size of 48 x 25 mm.   Mullion section size of 48x50mm.   Fixed  beading  section  size of 12 x 12mm. 1
Sqm
4914
      Providing     &     Fixing     of     Openable Windows  with  Fly-mesh  made  of pre- painted steel (Base Steel as per IS 513 of  0.58  mm  thick  galvanized  as  per  IS
277 
  with   zinc   of   150   GSM)   primer coated with epoxy primer of 5-7 microns thick,   finish   painted   with   a   polyester paint  of  12-16  microns  thick  and  back coated   with   5-7   microns   thick   alkyd backer  and  the  section  for  outer  frame of  72  x  55mm,  centre  mullion  of  72  x 50mm,  section  for  fixed  glass  beading section  of  12  x  12  mm  and  section  for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters,   fly   mesh   and   a   20   mm provision  for  guard  bars/grills  and  fly mesh shutter section of 20 x 40 mm and the  sections  cut  to  length  metre  joined with   corner   bracket,   centre   mullions fixed  with  mullion  cap,  stay,  handles, latch 2 Nos of heavy duty stainless steel pivot  hinges  per  shutter  and  panelled with 5mm thick plain float glass and S.S. Mesh  for  fly  mesh  shutter  (304  grade), fitted   using   rubber   gaskets   including fixing       the       windows       in       the concrete/masonry wall by means of self expanding    screws,    including    10mm Square  guard  bars  with  6”  (152.4mm) pitch , complete for finished item of work
   
780 MAT-01429 BMT-P.21 Single      shutter      Window      2’0”x4’0” (609.6mm  x  1219.2mm).    Outer  frame section  size  of  72x50mm  shutter  frame section size of 48 x 25 mm. 1
Sqm
6956
781 MAT-01430 BMT-P.22 Double   shutter   Window   with   vertical mullion    3’0”    x    4’0”    (    914.4mm    x 1219.2mm)  outer  frame  section  size  of 72x50mm  shutter  frame  section  size  of
48  x  25  mm.    Mullion  section  size  of 72x50mm.
1
Sqm
7288
782 MAT-01431 BMT-P.23 Double   shutter   Window   with   vertical member4’0”    x    4’0”    (1219.2mm    x 1219.2mm)  outer  frame  section  size  of 72x50mm  shutter  frame  section  size  of 48 x 25 mm and mullion section should be of 72x50mm. 1
Sqm
7288
783 MAT-01432 BMT-P.24 Centre fixed both side openable shutter window            5’0”x4’0”            (1524mm x1219.2mm).   Outer  frame  section  size of 72x50mm.  Shutter frame section size of 48 x 25 mm.   Mullion section size of 72x50mm.   Fixed  beading  section  size of 12 x 12 mm. 1
Sqm
6625
784 MAT-01433 BMT-P.25 Centre fixed both side openable shutter window          6’0”x4’0”          (1828.8mm x1219.2mm).   Outer  frame  section  size of 72x50mm.  Shutter frame section size of 48 x 25 mm.   Mullion section size  of 72x50mm.   Fixed  beading  section  size of 12 x 12 mm. 1
Sqm
5797
785 MAT-01438 BMT-P.30 ITEM DELETED    
786 MAT-01439 BMT-P.31 ITEM DELETED    
787 MAT-01440 BMT-P.32 Galvanized  powder  coated  Casement Windows with openable shutters duly manufactured     using     pressed     steel sections  in  mild  steel  conforming  to  IS
513
   of   having   1.0   mm   thick   and galvanized  as  per  IS  277  of  120  GSM surface  treatment  with  pure  polyester powder  coating  of  30-40  microns  thick and     section     for     outer     frame     of 60x50mm,     centre     for     mullion     of 62x50mm, section for shutter of 52 x 22 mm,  outer  frame  and  mullions  to  have one  side  rebate  for  glazed  shutter  of size   24   mm   and   10x10   mm   square guard bars provided at 125 mm c/c the sections   assembled   with   bolt   &   nut assembly   with   zinc-electroplated   M-5 bolts, GI Handle of size 80 mm x 15 mm
-1  No  per  shutter,  2  nos  of  stainless steel heavy duty pivot hinges of size 3" of  SS  304  Grade  per  shutter,  window panes with 5  mm thick plain float glass and  fixed  with glass  beading section  of 10x12   mm   size   with   0.8   mm   thick 
powder  coated  aluminium  'U'  channel and    window    frames    fixing    to    the concrete/masonry wall arrangement with self   expanding   screws,   complete   for finished  item  of  work  -  1220  x  1372  or below size
1
Sqm
5168
788 MAT-01441 BMT-P.33 Galvanized  powder  coated  Casement Windows with openable shutters duly manufactured     using     pressed     steel sections  in  mild  steel  conforming  to  IS
513  
of   having   1.0   mm   thick   and galvanized  as  per  IS  277  of  120  GSM surface  treatment  with  pure  polyester powder  coating  of  30-40  microns  thick and     section     for     outer     frame     of 60x50mm,     centre     for     mullion     of 62x50mm, section for shutter of 52 x 22 mm,  outer  frame  and  mullions  to  have one  side  rebate  for  glazed  shutter  of size   24   mm   and   10x10   mm   square guard bars provided at 125 mm c/c the sections   assembled   with   bolt   &   nut assembly   with   zinc-electroplated   M-5 bolts, GI Handle of size 80 mm x 15 mm
-1  No  per  shutter,  2  nos  of  stainless steel heavy duty pivot hinges of size 3" of  SS  304  Grade  per  shutter,  window panes with 5  mm thick plain float glass and  fixed  with glass  beading section  of 10x12   mm   size   with   0.8   mm   thick powder  coated  aluminium  'U'  channel and    window    frames    fixing    to    the concrete/masonry wall arrangement with self   expanding   screws,   complete   for finished  item  of  work  -  1530  x  1372  or above size
1
Sqm
4630
789 MAT-01442 BMT-P.34 Galvanized   powder   coated   Casement Windows  with  openable  shutters  duly manufactured     using     pressed     steel sections  in  mild  steel  conforming  to  IS
513  
of   having   1.0   mm   thick   and galvanized  as  per  IS  277  of  120  GSM surface  treatment  with  pure  polyester powder  coating  of  30-40  microns  thick and     section     for     outer     frame     of 88x50mm,  centre  for  mullion  of  62x88 mm,   section   for   glass   and   fly-proof mesh  shutter  of  52  x  22  mm,  outer frame  and  mullions  to  have  two  sides rebate for glazed shutter of size 24 mm and   10x10   mm   square   guard   bars provided  at  125  mm  c/c  the  sections assembled with bolt & nut assembly with zinc-electroplated  M-5  bolts,  GI  Handleof  size  80  mm  x  15  mm  -1  No  per shutter,  2  Nos  of  stainless  steel  heavy duty  pivot  hinges  of  size  3"  of  SS  304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with   0.8   mm   thick   powder   coated aluminium   'U'   channel   and   fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames    fixing    arrangement    to    the concrete/masonry      wall      with      self expanding screws, complete for finished item of work - 1220 x 1372 or below size
1
Sqm
6493
790 MAT-01443 BMT-P.35 Galvanized  powder  coated  Casement Windows with openable shutters duly manufactured     using     pressed     steel sections  in  mild  steel  conforming  to  IS
513 
  of   having   1.0   mm   thick   and galvanized  as  per  IS  277  of  120  GSM surface  treatment  with  pure  polyester powder  coating  of  30-40  microns  thick and     section     for     outer     frame     of 88x50mm,  centre  for  mullion  of  62x88 mm,   section   for   glass   and   fly-proof mesh  shutter  of  52  x  22  mm,  outer frame  and  mullions  to  have  two  sides rebate for glazed shutter of size 24 mm and   10x10   mm   square   guard   bars provided  at  125  mm  c/c  the  sections assembled with bolt & nut assembly with zinc-electroplated  M-5  bolts,  GI  Handle of  size  80  mm  x  15  mm  -1  No  per shutter,  2  Nos  of  stainless  steel  heavy duty  pivot  hinges  of  size  3"  of  SS  304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with   0.8   mm   thick   powder   coated aluminium   'U'   channel   and   fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames    fixing    arrangement    to    the concrete/masonry      wall      with      self expanding screws, complete for finished item of work - 1530 x 1372 orabove size
1
Sqm
5969
791 MAT-01444 BMT-P.36 Providing  &  Fixing  of  Mesh  windows made  of  pre-painted  steel  (Base  Steel as    per    IS    513    of    0.58mm    thick galvanized  as  per  IS  277  with  zinc  of
120  GSM),  primer  coated  with  epoxy primer   of   5-7   microns   thick,   finish painted  with  a  polyester  paint  of  12-16 microns thick and back coated with 5-7 microns  thick  alkyd  backer,  section  for outer   frame  of  47  x   36   mm,  centre mullion  of  60  x  36  mm,  section  mesh beading  18  x   6   mm   and   Fly  mesh shutter  section  of  20  x  40  mm,  the sections cut to length meter joined with corner bracket and centre mullions fixed with  mullion  cap,  handles,  latch,  2  Nos of   heavy   duty   stainless   steel   pivot hinges   per   S.S.   Mesh   for   fly   mesh shutter  (304  grade)  including  fixing  the frames in the concrete/masonry wall by means    of    self    expanding    screws complete for finished item of work.P
roviding   and   fixing   of   Openable   / Casement   Windows   made   of   pre- painted steel (Base steel as per IS 513 of  0.80  mm  thick  galvanized  as  per  IS
277   with   Zinc   of   120   GSM),   finish painted  with  a  polyester  paint  of  60-65 microns   thick   and   section   for   outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions   to   have   rebate   for   glazed shutter    with    a    provision   for    guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion  cap,  1  No.  of High  grade  nylon  latch  handle,  window stopper,   2   nos.   of   with   MS   Powder coated   /SS   ball   bearing   butt   Hinges provided per shutter and windows fitted with  4  mm  thick  plain  float  glass  with rubber    gaskets    including    fixing    the frames   in   concrete/masonry   wall   by means   of       self   expanding  screws, Including 10 mm Square guard bars with 6”  (152.4mm)  pitch  etc.,  complete  for finished item of work. 
1
Sqm
4333
792 MAT-01454 BMT-P.46 Single  openable  shutter  window  size  of 2’  0”  x  4’  0”  (609.6  x  1219.2mm)  outer frame   section   size   of     80   x   45mm, shutter frame section size of 52 x 25mm thick 1 sqm 4625
793 MAT-01455 BMT-P.47 Double openable shutter window Size of 3’  0”  x  4’  0”  (914.4mm  x  1219.2mm)
outer   frame   section   size   of   80   x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm
1 sqm 4917
794 MAT-01456 BMT-P.48 Double openable shutter window size of 4’0”   x   4’0”   (1219.2mm   x   1219.2mm) outer  frame  section  size  80  x  45mm, shutter  frame  section  size  of  52  x  25 mm ,Vertical mullion section size of 80 x 60 mm 1 sqm 4917
795 MAT-01457 BMT-P.49 Double  Openable  Shutter  and  Center Fixed window of size 5’0 x 4’0 ( 1524 x 1219.2mm)outer  frame  section  size  of 80mm  x  45mm,  shutter  frame  section size  of   52   x   25mm  ,Vertical   mullion section  size  of  80  x  60  mm,  beading section size of 9 x 12mm  to be provided for glass holding 1 sqm 4333
796 MAT-01458 BMT-P.50 Double  Openable  Shutter  and  Center Fixed window of size 6’0 x4’0 ( 1829.6 x 1219.2mm)outer  frame  section  size  of 80mm  x  45mm  ,  shutter  frame  section size  of   52   x   25mm  ,Vertical   mullion section  size  of  80  x  60  mm,  beading section size of 9 x 12mm  to be provided for glass holding Note:  The  above  rates  are  for  normal finish,  10%  extra  may  be  allowed  for Wood Grain finish Providing   and   fixing   of   Openable   / Casement Windows with fly mesh made of  pre-painted  steel  (Base  steel  as  per IS  513  of  0.80  mm  thick  galvanized  as per IS 277 with Zinc of 120 GSM), finish painted  with  a  polyester  paint  of  60-65 microns   thick   and   section   for   outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25  mm  x  0.6  mm  thick,  section  for  fly- shutter  of  52  x  25  mm  x  0.6  mm  thick and fitted with stainless steel 32 gauge fly  mesh  of  304  grade  with  144  holes per sq.inch and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the  sections  cut  to  length  metre  joined with corner bracket, centre mullion fixed with  mullion  cap,  1  No.  of  High  grade nylon  latch  handle,  window  stopper,  2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing  the  frames  in  concrete/masonry wall   by   means   of      self   expanding screws, Including 10 mm  Square guard bars   with   6”   (152.4mm)   pitch   etc., complete for finished item of work. 1 sqm 4333
797 MAT-01459 BMT-P.51 Single  openable  shutter  window  size  of 2’  0”  x  4’  0”  (609.6  x  1219.2mm)  outer frame Double rebate section size of  100 x  45mm,  Glazed  and  flymesh  shutter profile  section size of 52 x 25mm 1 sqm 6135
798 MAT-01460 BMT-P.52 Double openable shutter window Size of 3’  0”  x  4’  0”  (914.4mm  x  1219.2mm)
outer  frame  Double  rebate  section  size of  100  x  45mm,  Glazed  and  flymesh shutter   profile     section  size  of  52  x 25mm,  vertical  mullion  section  size  of 100 x 60 mm
1 sqm 6426
799 MAT-01461 BMT-P.53 Double openable shutter window size of 4’0”   x   4’0”   (1219.2mm   x   1219.2mm)
outer  frame  Double  rebate  section  size of  100  x  45mm,  Glazed  and  flymesh shutter   profile     section  size  of  52  x 25mm,  vertical  mullion  section  size  of 100 x 60 mm
1 sqm 6426
800 MAT-01462 BMT-P.54 Double  Openable  Shutter  and  Center Fixed window of size 5’0 x 4’0 ( 1524 x 1219.2mm)outer  frame  section  size  of 80mm  x  45mm  ,  shutter  frame  section size  of   52   x   25mm  ,Vertical   mullion section  size  of  100  x  60  mm  ,  beading section size of 9 x 12mm  to be provided for glass holding 1 sqm 5843
801 MAT-01463 BMT-P.55 Double  Openable  Shutter  and  Center Fixed window of size 6’0 x4’0 ( 1829.6 x 1219.2mm)outer  frame  section  size  of 80mm  x  45mm  ,  shutter  frame  section size  of   52   x   25mm  ,Vertical   mullion section  size  of  100  x  60  mm  ,  beading section size of 9 x 12mm  to be provided for glass holding 1 sqm 5843
      Note:  The  above  rates  are  for  normal finish,  10%  extra  may  be  allowed  for Wood Grain finish    
802 MAT-01481 BMT-P.73 ITEM DELETED    
      Supplying  and  fixing  of  WINDOWS with  Pre laminated  Cement Bonded Particle boards and Pre-Painted Steel Sections  (PPS)fabricated from pre- painted Cold rolled formed sections made of galvanized steel  color coated sections (Base  steel  as per IS-512 D quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with total coated thickness of 0.58mm primer coated with epoxy primer of 5-7 microns  thick, finish  painted  with  polyester  paint  of 12-16 microns  and  back  coated  with alkyd  backer  of  5-7  microns), sections for outer frame and centre mullion (duly filled with PU form of 40 kg/Cum) of 60mm x 50mm, with provision for fixing glazed shutter and the section for glazed/paneled of size 48 mm x 25 mm and another section of size 60 mm x 23 mm provided for separating glazed and paneled portion, the section cut to  length and  miter jointed  with  plastic corner brackets and  with  corner brackets for window outer frames of 50mm x 60mm, the mullion section fixed to the frame with plastic mullion cap and stiffener plates of size 60 mm x 50 mm made of 1.25mm thick CRCA electroplated provided to fix window frames to concrete/masonry, gasket for fixing glass and 10mm both sides pre- laminated cement bonded particle board and 5 mm thick color pin headed glass provided for glazing and providing guard bars of 10 mm square rods duly welded at 150 mm pitch to MS flat section of size 18 mm and 3 mm thick, and fixed to wall by means of self expansion nylon Cap (75) and electroplated wooden screws of size 100 mm, together  with aluminum powder coated fittings, A) 75mm long grip handles 1 no per shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy duty SS Pivot hinges 2 no’s per shutter, D) MS  Powder coated telescopic stay 1 no per shutter.    
803 MAT-01484 BMT-P.76-A Pre Laminated Cement Bonded Particle Board    WINDOWS    –   Single   shutter 2’0”x4’0”   outer   frame   section   size   of 50mm   x   60mm  shutter  frame  section size of 48mm x 25mm. 1
Sqm
5237
804 MAT-01485 BMT-P.76-B Pre Laminated Cement Bonded Particle Board  WINDOWS  –Double  shutter  3’0” x  4’0” outer frame section size of 50mm x  60mm  shutter  frame  section  size  of 48mm   x   25mm   mullion   section   size of50mm x 60mm for outer frame. 1
Sqm
5287
805 MAT-01486 BMT-P.76-C Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 3’0” x  3’0” outer frame section size of 50mm x  60mm  shutter  frame  section  size  of 48mm   x   25mm   Mullion   section   size of50mm x 60mm for outer frame. 1
Sqm
5499
806 MAT-01487 BMT-P.76-D Pre Laminated Cement Bonded Particle Board   WINDOWS   –   Double   shutter 4’0”x4’0”   outer   frame   section   size   of 50mm   x   60mm  shutter  frame  section size  of  48mm  x  25mm  Mullion  section size of50mm x 60mm for outer frame. 1
Sqm
5086
    II.SUB- SECTION SLIDING WINDOWS    
807 MAT-01434 BMT-P.26 Providing  and  fixing  Pre  painted  Steel sliding  Window/Door  fabricated  from roll formed sections made of Galvanized steel   colour   coated   /powder   coated (Base  Steel  as  per  IS  513  ‘D’  quality galvanized  as  per  IS  277  with  Zinc  of
120   Gms./   Sq.mtr)   with   total   coated thickness  of  0.58mm.  Primer  Coat  with epoxy   primer   of   5-7   microns   thick, finished  paint  with  a  polyester  paint  of 12-16  microns  thick  and  back  coated with  Alkyd  backer  of  5-7  microns  or powder    coated   with   pure   polyester powder   up   to   50-60   microns   thick. The   External   Section   for   two   track Sliding Window should be of 44 x 59mm with  a  provision  for  bottom  track  insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be  of  35x49mm  ,  Section  for  Window Euro   groove   should   be   of   25x24mm made    of    plastic    to    accommodate standard  accessories,  and  section  for window  lap  strip  should  be  of  21x4mm made                     of                     plastic. Section  for  Door  shutter  should  be  of 35x67mm,    Section    for    Door    Euro Groove  25x31mm  made  of  plastic    to accommodate standard accessories and size of lap strip should be of 39x41mm. The  Window/Door  to  be  panelled  with 5mm thick plain float glass. The gaskets are   to   be   made   of   Ethyl   Propylene Diamine    Manomer    [EPDM].    Corner Brackets for internal and external frame to be made of glass filled nylon.  Touch lock to be provided for Window Shutter. Sections  are  to  be cut to  length, joined and   assembled   by   means   of   corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding   caps   and   driving   MS electroplated   80mm   screws   into   the caps through frames. The Grill for safety for windows  to be made of 10mm thick square  rod  bars  with  152mm  pitch  for 
complete item of work .   For Door there will be no Safety Grill including cost and conveyance        of        all        materials, accessories,      labour      charges      for transportation, erection at site complete for finished item of work.
1
Sqm
6166
808 MAT-01435 BMT-P.27 ITEM DELETED    
809 MAT-01436 BMT-P.28 ITEM DELETED    
810 MAT-01437 BMT-P.29 ITEM DELETED    
811 MAT-01445 BMT-P.37 Providing     and     fixing     COMPOSITE SLIDING  WINDOW  fabricated  from  roll formed   sections   made   of   Galvanized Steel   colour   Coated/Powder   Coated (Base  Steel  as  per  IS  513  “D”  quality, Galvanized  as  per  IS  277  with  Zinc  of
120  grams  /Sq.Mtr.)  with  total  coated thickness  of  0.58  mm,  powder  coated with pure Polyester Powder up to 50-60 microns    thick    and    the    section    for external  frame  bottom  of  68  x  25mm (Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for shutter  of  59  x  23mm  and  Lap  Strip  of 30  x  7.5mm  (uPVC)  cut  to  length  and mitre  joined  with   L-bracket  and  5  mm plain  float  Galss  with  Ethyl  Propylene Diamine  Monomer  (EPDM)  gasket,  the corner  bracket for  external  frame  made of  Aluminium  ‘L’-Angle,  Corner  Bracket for internal frame made of Polyproylene, Crescent    Latch,    Rollers,    &    EPDM Gaskets  for  shutters,  wool  pile  for  lap strip,  Bump  Stop  Base  &  Rubber  for shutter    stopper    including    fixing    to brick/concrete    masonry    using    Nylon self-expanding   caps   and   driving   MS electroplated 80mm long screws into the caps  through  frames  and  fixing  10mm square guard bars with 6” pitch centre to centre (152.4mm) completed for finished item of
work Providing   and   fixing   of   Two   shutter Sliding  Windows  made  of  Galvanized Steel  (Base  Steel  as  per  IS  513,  D quality,  galvanized  as  per  IS  277  with Zinc  of  120  GSM),  using  factory  made section    powder    coated    with    Pure polyester  powder  upto  50-60  microns thick with total coated thickness of 0.58 mm   for   Outer   Frame   and   0.58   mm thickness for Sliding Shutter Section, the Outer  Frame  for  Two  Tracks  with  Grill provision  size  of  90  mm  x  50  mm  and without  grill provision  is of 75 mm x  50 mm and the  Window  Shutter section  of
0.58 mm x 36 mm and the outer Frame with   two   integrated   guide   tracks   of 12mm    width    and    24mm    deep    for provision  to  slide  the  Shutter  /  sash frame  and  facilitates  with  a  water  drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float  glass  of  reputed  make  and  fixed with   EPDM   weathering   seal   resistant accessories    and    handle    made    of Alumimium  1  No.  per  each  shutter  and cut  to  length  miter  joined  with  corner brackets including installation of window system  at  site  using  anchor  fasteners, Silicon   sealant   applied   at   the   Outer frame  corners  inclusive  of  conveyance of   all   materials   accessories,   labour charges,   and   erection   at   site   with complete finished item of work.
1
Sqm
5411
812 MAT-01446 BMT-P.38 a)  Window  with  Two  Sliding  Shutters and  without  Grill  Outer  Frame  Size  75 mm x 50 mm. 1
Sqm
5411
813 MAT-01447 BMT-P.39 b)  Window  with  Two  Sliding  Shutters and with Grill Outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to  fit  grill  made  of  10mm  MS  Sq  Rods for horizontal bars   welded at a regular pitch  of  150mm  to  12mm  x  6  mm  MS flat. 1
Sqm
5647
      Providing  and  fixing  of  Three  shutter Sliding  Windows  made  of  Galvanized Steel  (Base  Steel  as  per  IS  513,  D quality,  galvanized  as  per  IS  277  with Zinc  of  120  GSM),  using  factory  made section    powder    coated    with    Pure polyester  powder  upto  50-60  microns thick with total coated thickness of 0.58 mm   for   Outer   Frame   and   0.58   mm thickness for Sliding Shutter Section, the Outer  Frame  for  three  tracks  with  grill provision size of 105 mm x 50 mm and without  grill provision  is of 90 mm x  50 mm and the  Window  Shutter section  of 58  mm  x  36  mm  and  the  outer  Frame with   two   integrated   guide   tracks   of 12mm    width    and    24mm    deep    for provision  to  slide  the  Shutter  /  sash frame  and  facilitates  with  a  water  drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float  glass  of  reputed  make  and  fixed with   EPDM   weathering   seal   resistant accessories    and    handle    made    of Alumimium  1  No.  per  each  shutter  and cut  to  length  miter  joined  with  corner brackets including installation of window system  at  site  using  anchor  fasteners, Silicon   sealant   applied   at   the   Outer frame  corners  inclusive  of  conveyance of   all   materials   accessories,   labour charges,   and   erection   at   site   with complete finished item of work.Window  with  3  shutters  (center  fixed shutter  /  Center  sliding  shutter  /  center Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm x 50 mm.  Grill made of 10mm MS Square Rods  for  horizontal  bars  at  a  regular pitch of 150mm welded to MS flat of 12 x 6 mm.    
814 MAT-01448 BMT-P.40 i)  Center  Shutter  Fixed:   center  shutter frame made of section with size 20mm x 47mm  should  be  fitted  with  5mm  thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the  Outer  Frame  with  the  supporting section   of   size   29mm   x   20mm   of 0.58mm  thick  fixed  horizontally  on  top and bottom of the shutter frame. 1
Sqm
5647
815 MAT-01449 BMT-P.41 ii) Center Shutter Sliding:  center shutter frame  made  of  section  of  size  20mm  x 47mm should be fitted with            5 mm thick  plain  float  glass  of  reputed  make. The  supporting  guide  section  of  size 15mm  x  19mm  of  0.58mm  thick  fixed horizontally at top and bottom of shutter frame  and  slides  along  the  bottom  and top  guide  tracks  made  of  sections  size 24mm  x  20mm  of  0.58mm  thick  and 29mm x 20mm of 0.58mm thick 1
Sqm
6183
816 MAT-01450 BMT-P.42 iii)    Center  Fly  mesh  Shutter  Sliding: Section   for   Fly   mesh   Shutter   frame should  be  of  size  20mm  x  40mm  of 0.58mm  thick  and  fitted  with  SS  mesh (304   Grade).   The   supporting   guide section   of   size   29mm   x   20mm   of 0.58mm thick at the bottom and 15mm x 19mm  of  0.58mm  thick  at  the  top  fixed horizontally  to  the  Fly  mesh  frame  and slides  along  the  bottom  and  top  guide tracks  made  of  sections  size  20mm  x 20mm of 0.58mm and 29mm x 20mm of 0.58mm.Window  with  3  shutters  (Center  fixed shutter  /  Center  sliding  shutter  /  center Fly   mesh   shutter)   and   without   Grill Window  made  of  Outer  Frame  of  size 90mm x 50mm 1
Sqm
6183
817 MAT-01451 BMT-P.43 i)   Center Shutter Fixed:   center shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be  fitted with   5mm   thick   plain   float   glass   of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with   the   supporting   section   of   size 29mm  x  20mmof  0.58mm  thick  fixed horizontally  on  top  and  bottom  of  the shutter frame. 1
Sqm
5064
818 MAT-01452 BMT-P.44 ii) Center Shutter Sliding:  center shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be  fitted with  5  mm  thick  plain  float  glass  of reputed  make.    The  supporting  guide section   of   size   15mm   x   19mm   of 0.58mm  thick  fixed  horizontally  at  top and  bottom  of  shutter  frame  and  slides along  the  bottom  and  top  guide  tracks made of sections size 24mm x 20mm of 0.58mm  thick  and  29mm  x  20mm  of 0.58mm thick. 1
Sqm
5541
819 MAT-01453 BMT-P.45 iii)    Center  Fly  mesh  Shutter  Sliding: Section   for   Fly   mesh   shutter   frame should  be  of  size  20mm  x  40mm  and fitted  with  SS  mesh  (304  Grade).  The supporting guide section of size 29mm x 20mm  of  0.58mm  thick  at  the  bottom and  15mm  x  19mm  of 0.58mm  thick  at the top fixed horizontally to the Fly mesh frame  and  slides  along  the  bottom  and top  guide  tracks  made  of  sections  size 20mm  x  20mm  of  0.58mm  thick  and 29mm x 20mm of 0.58mm thick. 1
Sqm
5541
820 to
822
  BMT-P.70 to P.72 ITEM DELETED    
823   BMT-P.78 Providing and fixing factory made uPVC white colour casement/casementcum fixedglazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriatedimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage ofwater etc.
After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge  inclusive of cost of  Single / double glass panes  and silicon sealant .
Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
   
824 MAT-05444 BMT-P.78.A Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm). Sqm 6283.00
825 MAT-05445 BMT-P.78.B Casement   cum   fixed   panel   window having           both           end           single casement   panel,   middle   fixed   panels and           at           top           completely fixed  ventilator  with  S.S  friction  hinges (350  x  19  x  1.9)  madeof  (big  series)
frame  67  x  60  mm  ,  sash  67  x  80  mm &mullion  67  x  80  mm  all  having  wall thickness  of  2.3  ±  0.2  mmand  single glazing   bead/double   glazing   bead   of appropriatedimension.  (Area  of  window above 3.00 sqm upto 5.00 sqm).
Sqm 6517.00
  MAT-05446 BMT-P.79 Providing and fixing factory made uPVC white colour fixed glazedwindows / Ventilators  comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming
process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile
of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of  cost of  Single / double glass panes and silicon sealant.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
   
826     Fixed  windows  /  Ventilators    made  of (small   series)   frame   47   x   50mm   & mullion  47  x  68  mm  both  having  wall thickness  of  1.9  ±0.2  mm  and  single glazing bead of appropriate dimension. 1
Sqm
5830.00
827   BMT-P.80 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all
corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge inclusive of cost of  Single / double glass panes, wire  mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on  this account shall be made.
   
828 MAT-05447 BMT-P.80.A Two  track  two  panels  sliding  window made           of           (small           series) frame  52  x  44  mm  &sash  32  x  60  mm both                                               having
wall  thickness  of  1.9  ±  0.2  mm  and single           glazing           bead           of appropriate dimension. (Area of window upto 1.75 sqm)
1
Sqm
6038.00
829 MAT-05448 BMT-P.80.B Three track three panels sliding window with              fly              proof              SS wire  mesh  (Two  nos.  glazed & one no. wire                   mesh                   panels) made  of  (small  series)  frame  92  x  44 mm & sash 32 x 60 mmboth having wall thickness  of  1.9  ±  0.2  mm  and  single glazingbead   of   appropriate   dimension (Area of window upto 1.75 sqm). 1
Sqm
8058.00
830 MAT-05449 BMT-P.80.C Two  track  two  panels  sliding  window made            of            (big            series) frame 67 x 50 mm & sash 46 x 62 mm both                     having                     wall thickness  of  2.3  ±  0.2  mm  and  single glazing           bead           /           double glazing bead of appropriate dimension . (Area                    of                     window
above                     1.75                     sqm 
upto 2.50 sqm).
1
Sqm
6220.00
831 MAT-05450 BMT-P.81 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required),
EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon  rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc.
Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc.
After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing &
direction of Engineer-in-Charge inclusive of cost of  Single / double glass panes, wire mesh  and silicon sealent . Two track two panels sliding window made of (big series)  frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window above2.50 sqm  upto
4.00 sqm.)
Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be 
acceptable.Variation in profile dimension in higher side shall be accepted
but no extra payment on this account shall be made.
1
Sqm
6174.00
    III.SUB- SECTION VENTILLATORS    
      Providing    and    fixing    of    top    hung Ventilators  made  of  pre-painted  steel (Base  steel  as  per  IS  513  of  0.80  mm thick galvanized as per IS 277 with Zinc of   120   GSM),   finish   painted   with   a polyester  paint  of  60-65  microns  thick and  section  for  outer  frame  of  80  x  45 mm,  centre  mullion  of  80  x  60  mm, section for shutter of 52 x 25 mm x 0.6 mm  thick,  outer  frame  and  mullions  to have  rebate  for  glazed  shutter  with  a provision  for  guard  bars/grills  and  the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion  cap,  1  No.  of  High  grade  nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt  Hinges  provided  per  shutter  and windows  fitted  with  4  mm  thick  plain float glass with rubber gaskets including fixing  the  frames  in  concrete/masonry wall   by   means   of      self   expanding screws, Including 10 mm  Square guard bars   with   6”   (152.4mm)   pitch   etc., complete for finished item of work.    
832 MAT-01464 BMT-P.56 Single  openable  ventilator  shutter   size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame   section   size   of     80   x   45mm, shutter frame section size of 52 x 25mm thick 1 sqm 5550
833 MAT-01465 BMT-P.57 Double openable ventilator shutter  Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm)
outer   frame   section   size   of   80   x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm
1 sqm 5550
834 MAT-01466 BMT-P.58 Double openable fix shutter  size of 4’0” x   3’0”   (1219.2mm   x   914.4mm)   outer frame   section   size   of   80   x   45mm   , shutter  frame  section  size  of  52  x  25 mm ,Vertical mullion section size of 80 x 60 mm 1 sqm 5550
835 MAT-01467 BMT-P.59 Single  fixed  Louvers  Ventilator   size  of 2’  0”  x  2’  0”  (609.6  x  609.6mm)  outer frame box section size of  80 x 45mm 1 sqm 3797
836 MAT-01468 BMT-P.60 Double fixed Louvers ventilator   Size of 4’  0”  x  2’  0”  (1219.2mm  x  609.6mm)
outer  frame  box  section  size  of  80  x 45mm, vertical mullion section size of 80 x 60 mm
1 sqm 3797
837 MAT-01469 BMT-P.61 Double fixed Louvers Ventilator   size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame  box  section  size  of  80 x  45mm  , Vertical  mullion  section  size  of  80  x  60 mm 1 sqm 3797
      Note:  The  above  rates  are  for  normal finish,  10%  extra  may  be  allowed  for Wood Grain finish    
      Providing    and    fixing    of    top    hung Ventilator   with fly mesh made of pre- painted steel (Base steel as per IS 513 of  0.80  mm  thick  galvanized  as  per  IS
277
   with   Zinc   of   120   GSM),   finish painted  with  a  polyester  paint  of  60-65 microns   thick   and   section   for   outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25  mm  x  0.6  mm  thick,  section  for  fly- shutter  of  52  x  25  mm  x  0.6  mm  thick and fitted with stainless steel 32 gauge fly  mesh  of  304  grade  with  144  holes per sq.inch and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the  sections  cut  to  length  metre  joined with corner bracket, centre mullion fixed with  mullion  cap,  1  No.  of  High  grade nylon  latch  handle,  window  stopper,  2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing  the  frames  in  concrete/masonry wall   by   means   of      self   expanding screws, Including 10 mm  Square guard bars   with   6”   (152.4mm)   pitch   etc., complete for finished item of work.
   
838 MAT-01470 BMT-P.62 Single     openable     ventilator     shutter window  size  of  2’  0”  x  2’  0”  (609.6  x 609.6mm)  outer  frame  section  size  of
100   x   45mm,   Glazed   and   flymesh shutter frame section size of 52 x 25mm thick
1 sqm 6865
839 MAT-01471 BMT-P.63 Double    openable    ventilator    shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of
100   x   45mm,   Glazed   and   flymesh 
shutter   frame   section   size   of   52   x 25mm,  vertical  mullion  section  size  of 100 x 60 mm
1 sqm 6865
840 MAT-01472 BMT-P.64 Double openable fix shutter window size of  4’0”  x  3’0”  (1219.2mm  x  914.4mm)
outer  frame  section  size  100 x  45mm  , Glazed    and    flymesh    shutter    frame section   size   52   x   25   mm   ,Vertical mullion section size of 100 x 60 mm
1 sqm 6865
841 MAT-01473 BMT-P.65 Single  fixed  Louvers  Ventilator  window size of 2’ 0” x  2’ 0” (609.6 x 609.6mm) outer  frame  box  section  size  of   100  x 45mm,  flymesh  shutter  frame  section size 52 x 25 mm 1 sqm 4625
842 MAT-01474 BMT-P.66 Double  fixed  Louvers  ventilator  window Size   of   4’   0”   x   2’   0”   (1219.2mm   x 609.6mm)  outer  frame box  section size of  100  x  45mm,  flymesh  shutter  frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm 1 sqm 4625
843 MAT-01475 BMT-P.67 Double fixed Louvers Ventilator window size    of    4’0”    x    3’0”    (1219.2mm    x 914.4mm)  outer  frame box  section size
100  x  45mm  ,  flymesh  shutter  frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm Note:  The  above  rates  are  for  normal finish,  10%  extra  may  be  allowed  for Wood Grain finish Supplying   and   fixing   of   Top   Hung Ventilators  made  of  pre  -  painted  steel (base  steel  as  per  IS  513  of  -0.58  mm thick  'D"  quality,  galvanized  as  per  IS
277   with   zinc   of   120   GSM)   primer coated with epoxy primer of 5-7 microns thick,   finish   painted   with   a   polyester paint  of  12-16  microns  thick  and  back coated   with   5-7   microns   thick   alkyd backer,  section  for  outer  frame  of  46  x 52 mm section and for shutter of 46 x 46 mm  section  for  mullion  46  x  70  mm, The  Ventilator  to  be  panelled    4  mm pinhead   glass     with   Ethyl   propylene Diamine  monomer  Gasket  (EPDM)  and the  sections  cut  to  length  mitre  joined with corner brocket mullions fixed using mullion  cap  and  with  handle  made  of high  grade  aluminium  powder  coated and   nylon   receiver,   corner   brackets made  of  CRCA  with  Zinc  Phosphate, Mullion caps made of glass filled nylon, frames  fixed  to  the  concrete  /masonry 
wall by means of self expanding screws including 10 mm square guard bars with 6"  pitch  complete  for  finished  item  of work
1 sqm 4625
844 MAT-01418 BMT-P.10 Ventilators:   Top   Hung   2   '-0"   x   2'-0" (609.6x609.6mm)   outer   frame   section size  of  46mm  x  52  mm  shutter  frame section size of 46mm x 46 mm 1
Sqm
6295
845 MAT-01419 BMT-P.11 Ventilators:   Top   Hung   4   '-0"   x   2'-0" (1219.2x609.6mm)   outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm 1
Sqm
6295
846 MAT-01420 BMT-P.12 Ventilators:    Top    Hung    4'-0"x    3'-0" (1219.2x914.4mm)  outer  frame  section size   of   46   x   52m   m   shutter   frame section  size  of  46  x  46  mm  Mullion section size of 46 x 70 mm Supplying  and  fixing  of  Fixed  Louvered Ventilators   made of pre - painted steel (base  steel  as  per  IS  513  of  -0.58  mm thick  'D"  quality,  galvanized  as  per  IS
277  
with   zinc   of   120   GSM)   primer coated with epoxy primer of 5-7 microns thick,   finish   painted   with   a   polyester paint  of  12-16  microns  thick  and  back coated   with   5-7   microns   thick   alkyd backer,    The    section    for    louvered ventilators should be of of 33 x 56  mm Box section paneled with  4 mm pinhead glass   with   Ethyl   propylene   Diamine monomer    Gasket    (EPDM)    and    the sections  cut  to  length  mitre  joined  with corner  bracket  .  corner  brackets  made of   CRCA   with   Zinc   Phosphate.   The frames   to   be   fixed   to   the   concrete
/masonry    wall    by    means    of    self expanding   screws   including   10   mm square   guard    bars    with    6"    pitch complete for finished item of work.
1
Sqm
6295
847 MAT-01421 BMT-P.13 Ventilators:  Fixed  louvers  2'-0"  x  2'-0" (609.6x609.6mm)(Box    section)    outer frame section size of 33 x 56 mm 1
Sqm
4306
848 MAT-01422 BMT-P.14 Ventilators:  Fixed  louvers  4'-0"  x  2'-0" (1219.2 x 609.6 mm) (Box section) outer frame   section   size   of   33   x   56   mm Mullion section size of 33 x 56 mm 1
Sqm
4306
849 MAT-01423 BMT-P.15 Ventilators:  Fixed  louvers  4'-0"  x  3'-0" (1219.2 x 914.4 mm) (Box section) outer frame   section   size   of   33   x   56   mm Mullion section size of 33 x 56 mm 1
Sqm
4306
850 to
853
  BMT-P.68 to P.75 ITEMS DELETED    
854 MAT-01488 BMT-P.77 Providing  and  fixing  3  Track  3  Shutter Pre  painted  Steel  sliding  Window/Door fabricated   from   roll   formed   sections made of Galvanized steel colour coated
/powder  coated  (Base  Steel  as  per 
IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated   thickness   of   0.58mm.   Primer Coat  with  epoxy  primer  of  5-7  microns thick,   finished   paint   with   a   polyester paint  of  12-16  microns  thick  and  back coated with Alkyd backer of 5-7 microns or  powder  coated  with  pure  polyester powder  up  to  50-60  microns  thick.  The External Section  for  Three  Track  Three Sliding   Shutter     should   be   of   44   x 107mm with a provision for bottom track insert   profile   of   10x9   mm   made   of aluminium.  Section  for   Window  glass shutter should be of 35x49mm , Section for  Window  Euro  groove  should  be  of 25x24mm      made      of      plastic      to accommodate    standard    accessories, and section for window  lap strip should be of 21x4mm made of plastic. Section for    Mesh     Shutter    should     be     of 35x49mm.   Section   for   Door   shutter should be of 35x67mm, Section for Door Euro Groove  25x31mm  made of plastic to  accommodate  standard  accessories and   size   of   lap   strip   should   be   of 39x41mm.   The   Window/Door   to   be panelled   with   5mm   thick   plain   float glass.  The  gaskets  are  to  be  made  of Ethyl    Propylene    Diamine    Manomer [EPDM].   Corner   Brackets   for   internal and external frame to be made of glass filled  nylon.  Touch  lock  to  be  provided for  Window  Shutter.  Sections  are  to  be cut  to  length,  joined  and  assembled  by means  of  corner  brackets.  The  above frame   to   be   fixed   to   Brick/Concrete masonry by  using Nylon self-expanding caps    and    driving    MS    electroplated 80mm   screws   into   the   caps   through frames. The Grill for safety for windows to  be  made  of  10mm  thick  square  rod bars with 152mm pitch for complete item of  work  .      For  Door  there  will  be  no Safety     Grill     including     cost     and conveyance        of        all        materials, accessories,      labour      charges      for transportation, erection at site complete for finished item of work
1
Sqm
6818
      .    
    Q.SECTION STRUCTURAL GLAZING    
    I.SUB- SECTION FIXED GLAZING    
854 MAT-01496 BMT-Q.08 ITEM DELETED    
855 MAT-01497 BMT-Q.09 ITEM DELETED    
    II.SUB- SECTION STRUCTURAL GLAING    
856 MAT-01489 BMT-Q.01 Providing and fixing Structural Glazing fabricated   from   Roll   formed   sections made   of   Pre-painted   Steel   /   Powder coated (Base steel as per IS 513 of ‘D’ quality,  galvanized  as  per  IS  277  with Zinc  of  120  Gm/Sqm)  with  total  coated thickness  of  0.72  mm  and  the  glass holding   section   made   of   304   grade stainless    steel    of    0.58    mm    thick galvanised   steel   section   as   stiffeners inside  the  colour  coated  steel  powder coated   sections   as   per   the   design requirement  &  calculations  to  suit  wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns thick,   finish   painted   with   a   polyester paint  of  12-16  microns  thick  and  back coated with Alkyd backer of 5-7 microns or  powder  coated  with  pure  polyester powder  up  to  50-60  microns  thick  and the vertical section of 50 mm x 99 mm x
0.72  mm,  33  mm  x  56  mm  x  0.72  mm for   frame   horizontal   section,   stiffener section  of  47  mm  x  97  mm  x  1  mm, cover  profiles  sections  of  20  mm  x  58 mm x 0.58 mm, glass holding section of
37  mm  x  37  mm  &  37  mm  x  18  mm including  fixing  5mm  thick  Ocean  Blue reflective glass, brackets made of CRCA powder  coated/Electroplated  to connect vertical to horizontal, vertical to slab, to fix verticals  at top & bottom as  per  site requirement  and  gasket  made  of  Ethyl Propylene    Diamine    Monomer,    U.V. resistant  silicon  sealant  including  fixing in   concrete/masonry    wall    with   self- expanding  cap  &  screws  inclusive  of cost and conveyance of all materials to site,    all    labour    charges,    incidental charges,  cost  of  all  consumables  etc. and fixing charges complete for finished item of work.
1
Sqm
6625
857 MAT-01490 BMT-Q.02 Providing  and  fixing  Top  Hung  shutters in  Structural  Glazing  fabricated  from Roll   formed   sections   made   of   Pre- painted  Steel  /  Powder  coated  (Base steel   as   per   IS   513   of   ‘D’   quality, galvanized  as  per  IS  277  with  Zinc  of
120     Gm/Sqm)     with     total     coated thickness  of  0.72  mm  and  the  glass holding   section   made   of   304   grade stainless  steel  of  0.58  mm  thick,  duly providing   stiffeners   inside   the   colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns   thick   and   back   coated   with Alkyd  backer  of  5-7  microns  or  powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm x 0.58 mm, shutter sections of 57 mm x 33 mm x 0.72 mm, stiffener  sections  of  55  mm  x  31  mm x 1mm,  hinges  –  2  Nos  for  each  shutter and aluminium Stays – 2 Nos. for each shutter,  aluminium  Handle  –  1  no.  for each     shutter     including     cost     and conveyance  of  all  materials  to  site,  all labour charges, incidental charges, cost of   all   consumables   etc.   and   fixing charges etc for finished item of work
1
Sqm
5355
    III CURTAIN WALLING    
858 MAT-01491 BMT-Q.03 Supplying and fixing of curtain Glazing made of pre painted steel (base steel as per  IS  513  of  0.58  mm  thick  D  quality, galvanized  as  per  IS  277  with  Zinc  of
120  GSM)  Primer  coated  with  epoxy primer   of   5-7   microns   thick,   finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns  thick  alkyd  backer  using  the section for  outer frame of  46 x  52 mm, section  for  mullion  of  46  x  70  mm  and section for beading of 18 x 25 mm and the  glazing  with  5  mm  thick  plain  float glass     fitted    with     Ethyl     Propylene diameine   Monomer   (EPDM)   gaskets and  the  sections  cut  to  length,  mitre joined    with    corner    bracket,    centre mullions fixed suing mullion cap inluding handle  made  of  high  grade  Aluminium powder   coated   and   nylon   receiver, corner  brackets  made  of  CRCA  with zinc phosphating, mullion caps made of Glass  filled  nylon  including  fixing  the 
frames  in  the  concrete  /  masonry  wall with    self    expanding    screws,    etc., complete    for    finished    item.-    Fixed Glazing  2'-0"  x  2'-0"  (609.6x609.6mm) grid outer frames section size of 46 x 52 mm
1
Sqm
5466
859 MAT-01492 BMT-Q.04 Mullion   section   size   of   46   x   70mm Beading  section  size  of  18  x  25  mm  - Fixed       Glazing       2'-0"       x       3'-0" (609.6x914.4mm)    grid    outer    frame section size of 46 x 52 mm 1
Sqm
5466
860 MAT-01493 BMT-Q.05 Mullion   section   size   of   46   x   70mm Beading  section  size  of  18  x  25  mm Fixed       Glazing       3'-0"       x       3'-0" (914.4x914.4mm)    grid    outer    frame section size of 46 x 52 mm 1
Sqm
4295
861 MAT-01494 BMT-Q.06 Mullion   section   size   of   46   x   70mm Beading  section  size  of  18  x  25  mm Fixed       Glazing       3'-0"       x       4'-0" (914.4x1219.2mm)    grid    outer    frame section size of 46 x 52 mm 1
Sqm
4295
862 MAT-01495 BMT-Q.07 ITEM DELETED    

*****