Building Civil Items-4



 Building Civil Items-4

    S.SECTION DISMANTLING clearing away and carefully stacking materials useful for reuse.    
863 MAT-01498 BMT-S.01 Stone masonry in cement mortar 1
Cum
390
864 MAT-01499 BMT-S.02 Terracing work in roofs or floors 10
Sqm
165
865 MAT-01500 BMT-S.03 Flat  stones  in  roof  or    floors  including lifting 10
Sqm
143
866 MAT-01501 BMT-S.04 Pan tiled or Mangalore tiled roof without roof timbers. 10
Sqm
120
867 MAT-01502 BMT-S.05 Flat  and  pan  tiles  or  Mangalore  tiles over flat tiles without roof timbers 10
Sqm
143
868 MAT-01503 BMT-S.06 Wrought  and  framed  timber  in  roofs  or floors 1
Cum
206
869 MAT-01504 BMT-S.07 Old lime mortar plaster 10
Sqm
44
870 MAT-01505 BMT-S.08 Old cement mortar plaster 10
Sqm
55
871 MAT-01506 BMT-S.09 Dry  rough  stone  revetment  for  aprons and stacking within 40 M lead 1
Cum
65
872 MAT-01507 BMT-S.10 Revetment   for   aprons   and   stacking grouted within 40  lead 1
Cum
48
873 MAT-01508 BMT-S.11 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10Sqm 66
874 MAT-01509 BMT-S.12 Through    scraping    of    old    plastered surface 10
Sqm
44
875 MAT-01510 BMT-S.13 Washing of plastered surface with soap, soda  and  water  (or  with  soda  lime  and water) 10
Sqm
14
876 MAT-01511 BMT-S.14 clean removal of lime plaster from walls and raking out joints 20mm deep or from terraced  roof  and  raking  out  joints  100 mm deep 10
Sqm
44
877 MAT-01512 BMT-S.15 Clean  removal  of  cement  plaster  from walls and raking out joint 200 mm deep 10
Sqm
54
    T.SECTION READY MIX CONCRETE   DELETED
    U.SECTION EXPANSION JOINT FILLERS    
878 MAT-01513 BMT-U.01 Supply  of  high  performance  expansion joint  filler  board  conforming  to  M.O.S.T
-  18 mm THICK
1
Sqm
656
879 MAT-01514 BMT-U.02 Supply  of  high  performance  expansion joint  filler  board  conforming  to  M.O.S.T
-  20 mm THICK
1
Sqm
735
880 MAT-01515 BMT-U.03 Supply  of  high  performance  expansion joint  filler  board  conforming  to  M.O.S.T
- 25 mm THICK
1
Sqm
919
881 MAT-01516 BMT-U.04 Supply of expansion joint filler board for buildings,  columns,  beams  and  slabs 20 mm THICK 1
Sqm
263
882 MAT-01517 BMT-U.05 Supply of expansion joint filler board for buildings,  columns,  beams  and  slabs 25 mm THICK 1
Sqm
329
883 MAT-01518 BMT-U.06 Supply of expansion joint filler board for buildings, columns, beams and slabs 50 mm THICK 1
Sqm
656
884 MAT-01519 BMT-U.07 Supply   of   back   up   to   cold   applied sealant  in  construction  and  longitudinal joint - 10 mm OD 1 RM 11
885 MAT-01520 BMT-U.08 Supply   of   back   up   to   cold   applied sealant  in  construction  and  longitudinal joint - 12 mm OD 1 RM 13
886 MAT-01521 BMT-U.09 Supply   of   back   up   to   cold   applied sealant  in  construction  and  longitudinal joint - 15 mm OD 1 RM 15
887 MAT-01522 BMT-U.10 Supply   of   back   up   to   cold   applied sealant  in  construction  and  longitudinal joint - 20 mm OD 1 RM 21
888 MAT-01523 BMT-U.11 Supply   of   back   up   to   cold   applied sealant  in  construction  and  longitudinaljoint - 25 mm OD 1 RM 27
           
    V.SECTION LABOUR  CHARGES    
889 MAT-01524 BMM-V.01 Bailing    out    water    for    earth    work excavation    /concrete    for    foundation below  water  level.  (For  building  items only) - Other than sandy soil - 0.0 M to
1.0 M
1 cum 242
890 MAT-01525 BMM-V.02 Bailing    out    water    for    earth    work excavation    /concrete    for    foundation below  water  level.  (For  building  items only) - Other than sandy soil - 1.0 M to
2.0 M
1 cum 286
891 MAT-01526 BMM-V.03 Bailing    out    water    for    earth    work excavation    /concrete    for    foundation below  water  level.  (For  building  items only) - Other than sandy soil - 2.0 M to
3.0 M
1 cum 334
892 MAT-01527 BMM-V.04 Bailing    out    water    for    earth    work excavation   /   for   concrete   foundation below  water  level.  (For  building  items only) Sandy soil - 0.0 M to 1.0 M 1 cum 384
893 MAT-01528 BMM-V.05 Bailing    out    water    for    earth    work excavation    /for    concrete    foundation below  water  level.  (For  building  items only) Sandy soil - 1.0 M to 2.0 M 1 cum 597
894 MAT-01529 BMM-V.06 Bailing    out    water    for    earth    work excavation    /concrete    for    foundation below  water  level.  (For  building  items only) Sandy soil - 2.0 M to 3.0 M 1 cum 721
895 LAB-00418 BMM-V.07 Labour  charges  for  making,  fabricating office    furniture,    racks,    work-station furniture,  cup-board  shutters  with  ply- wood/   MDF   sheets,   decolam/   veneer laminations    including    fixing    cutting, making, assembling, fixing hinges, fixing fixtures,   fixing   locks,   pasting   sheets/ laminations    fixing    in    position    with necessary   screws   excluding   cost   of materials, accessories, fittings 1
Sqm
605
896 LAB-00419 BMM-V.08 Labour  charges  for  making,  fabricating kitchen     furniture,     cup-boards     with shutters,   box   cup-boards,   box   racks, with  ply-wood/  MDF  sheets,  decolam/ veneer    laminations    including    fixing cutting,    making,    assembling,    fixing hinges,    fixing    fixtures,    fixing    locks, pasting   sheets/   laminations   fixing   in position      with      necessary      screws excluding cost of materials, accessories, fittings 1
Sqm
924
897 LAB-00503 BMM-V.09 Rounding    the    edges    of    Kadapa    / Shahabad stone slabs of any thickness including polishing the same 1 Rm 105
898 LAB-00504 BMM-V.10 Half   Rounding   the   edges   of   Marble/ Granite  stone  slabs  of  all  thicknesses including polishing the same. 1 Rm 318
899 LAB-00505 BMM-V.11 Full   Rounding   the   edges   of   Marble/ Granite  stone  slabs  of  all  thicknesses including polishing the same. 1 Rm 412
900 LAB-00506 BMM-V.12 Machine  Cutting  charges  -  for  Marble/ Granite  slabs  up  to  50  mm  thick  by mechanical device. 1 RM 17
901 LAB-00507 BMM-V.13 Flat nosing to Kadapa/ Shahabad stone slabs of any thick 1 Rm 50
902 LAB-00420 BMM-V.14 Labour   charges   for   fabricating   steel works   like   Window   Grills,   Compound Wall    Grills,    Iron    Doors,    Windows including  cost  of  welding  rods,  power charges,   excluding   cost   of   fixing   in position 1 Kg 27
903 LAB-00421 BMM-V.15 Labour  charges  for  fixing  Iron  Doors, Iron   Windows   and   Window   Grills   in position 1 Kg 5
904 LAB-00422 BMM-V.16 Labour charges for fabricating all heavy steel  works  like  Trusses,  Stanchions, Heavy   Beams   and   Girders   including cost of welding rods, power charges, etc excluding cost of fixing in position 1 Kg 24
905 LAB-00423 BMM-V.17 Labour   charges   for   fixing   heavy   iron grills,     Trusses,     Stanchions,     Heavy Beams  and  Girders  erecting  in  position and fixing by using chain  pulley blocks, Derek  pole  arrangements  and  cranes etc., complete in position 1 Kg 21
906 LAB-00424 BMM-V.18 Labour    charges    for    Fabrication    of stainless    steel    railing    works    using stainless  steel  welding  rods  including buffing,  polishing,  lacquer  finishing,  to present seamless finish 1 Kg 131
907 LAB-00425 BMM-V.19 Labour    charges    for    Fabrication    of stainless   steel   sheet   cladding   works using    stainless    steel    welding    rods including    buffing,    polishing,    lacquer finishing, to present seamless finish 1 sqm 1756
908 LAB-00426 BMM-V.20 Labour   charges   for   Glass   designing works    on    any    thickness    of    Glass including fixing at site - Etching works 1
Sqm
955
909 LAB-00427 BMM-V.21 Labour   charges   for   Glass   designing 1 1182
      works    on    any    thickness    of    Glass including fixing at site - Reverse Etching work Sqm  
910 LAB-00428 BMM-V.22 Labour   charges   for   Glass   designing works    on    any    thickness    of    Glass including fixing at site - Acid wash works 1
Sqm
1477
911 LAB-00429 BMM-V.23 Labour  charges  for  fixing  Flush  door shutters of any thickness to the existing door frame including fixing the fixtures to the   door   shutter   excluding   cost   of shutter 1
Sqm
383
912 LAB-00430 BMM-V.24 Labour charges for fixing glass panes of any   thickness   to   the   existing   door   / window    panes    including    fixing    the beading excluding cost of beading 1
Sqm
286
913 LAB-00431 BMM-V.25 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures    etc.    for    Teak    wood    Fully panelled    doors    external    or    internal including frame 1 sqm 1570
914 LAB-00432 BMM-V.26 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Glazed  and panelled   doors   including   fixing   glass including frame 1 sqm 1484
915 LAB-00433 BMM-V.27 Labour charges for wrought and  put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures etc. for Teak wood Framed and planked doors including frame 1 sqm 1302
916 LAB-00434 BMM-V.28 Labour charges for  wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures   etc.   for   Teak   wood   Ledged, braced   and   planked   doors   including frame 1 sqm 1028
917 LAB-00435 BMM-V.29 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Flush  type door shutter including frame 1 sqm 785
918 LAB-00436 BMM-V.30 Labour charges for wrought and put up including fixing in position  frames of any 1 sqm 1005
      size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Windows glazed including outer frame and shutter frame    
919 LAB-00437 BMM-V.31 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Windows panelled   including   outer   frame   and shutter frame 1 sqm 1515
920 LAB-00438 BMM-V.32 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Windows ledged,  braced  and  planked  including outer frame 1 sqm 1034
921 LAB-00439 BMM-V.33 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all  necessary fixtures  etc.  for  Teak  wood  Windows framed   and   planked   including   outer frame and shutter frame 1 sqm 1237
922 LAB-00440 BMM-V.34 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Ventilators glazed, fixed with double frame with wire netting including frame 1 sqm 833
923 LAB-00441 BMM-V.35 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures   etc.   for   Teak   wood   Swing ventilators  glazed  including  outer  frame and shutter frame 1 sqm 1053
924 LAB-00442 BMM-V.36 Labour charges for  wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Teak  wood  Weld  mesh doors   and   windows   including   outer frame and shutter frame 1 sqm 592
925 LAB-00443 BMM-V.37 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary 1 sqm 689
      fixtures  etc.  for  Teak  wood  G.I  or  .AC sheet  door  &  windows  including  outer frame and shutter frame    
926 LAB-00444 BMM-V.38 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Fully panelled doors external or internal including frame 1 sqm 1452
927 LAB-00445 BMM-V.39 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Glazed   and   panelled   doors   including fixing glass including frame 1 sqm 1388
928 LAB-00446 BMM-V.40 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Framed   and   planked   doors   including frame 1 sqm 1204
929 LAB-00447 BMM-V.41 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Ledged,   braced   and   planked   doors including frame 1 sqm 942
930 LAB-00448 BMM-V.42 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Flush type door shutter including frame 1 sqm 754
931 LAB-00449 BMM-V.43 Labour charges for  wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Windows  glazed  including  outer  frame and shutter frame 1 sqm 940
932 LAB-00450 BMM-V.44 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Windows panelled including outer frame and shutter frame 1 sqm 1401
933 LAB-00451 BMM-V.45 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Windows  ledged,  braced  and  planked including outer frame 1 sqm 957
934 LAB-00452 BMM-V.46 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all  necessary fixtures  etc.  for  Other  than  teakwood Windows  framed  and  planked including outer frame and shutter frame 1 sqm 1143
935 LAB-00453 BMM-V.47 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Ventilators   glazed,   fixed   with   double frame with wire netting including frame 1 sqm 810
936 LAB-00454 BMM-V.48 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Swing ventilators glazed including outer frame and shutter frame 1 sqm 1012
937 LAB-00455 BMM-V.49 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures  etc.  for  Other  than  teakwood Weld     mesh     doors     and     windows including outer frame and shutter frame 1 sqm 563
938 LAB-00456 BMM-V.50 Labour charges for wrought and put up including fixing in position  frames of any size,    shutters    for    doors,    windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood G.I or .AC   sheet door & windows including outer frame and shutter frame 1 sqm 658
939 LAB-00508 BMM-V.51 Grooves 2-3 mm 1 Rm 55
    W.SECTION MISCELLANEOUS ITEMS    
940 MAT-01575 BMS-W.01 Supplying Aluminium anodised Sections for       Doors,       partitions,       windows, Ventilators (including annodization cost) 1 Kg 306
941 MAT-01576 BMS-W.02 Sun Control film to the glazed windows partition including labour charges. 1 sqm 313

 

942

 

MAT-01577 BMS-W.03 Aluminium   Venetian   Blinds   horizontal
25.4 mm wide with all accessories.
1 sqm 798
943 MAT-01578 BMS-W.04 Aluminium   Venetian   Blinds   horizontal
20.0 mm wide with all accessories.
1 sqm 760
944 MAT-01579 BMS-W.05 Venetian  blinds  Vertical  blinds  100  mm wide with all accessories. 1 sqm 1290
945 MAT-01580 BMS-W.06 Rubber Beading 1 RM 2
946 MAT-01581 BMS-W.09 Chlorpyriphos/     Lindane     emulsifiable concentrate of 20% 1 Litre 217
947 MAT-01582 BMS-W.10 Soft Brush Each 141
948 MAT-01583 BMS-W.11 Wire Brush Each 31
949 MAT-01584 BMS-W.12 Supplying      and      fixing      aluminium composite      cladding      with      skin material   0.25   mm   thick   aluminium sheet        cover        material        natural polyethylene  aluminium  cladding  panel fixed   with   extruded   aluminium   basis frame    (50x25x1.5mm)    angle    cleats, weather sealants, rivets, GI brackets all as  approved,  using  suitable  bolts  on structural steel work including necessary accessories  complete  in  all    respects including   all   scaffolding   and   labour charges etc., complete for finished item of  work  but  excluding  cost  of  structural steel fabrication, if any, ACP Cladding - 3 mm thk 1
Sqm
2189
950 MAT-01585 BMS-W.13 Supplying      and      fixing      aluminium composite      cladding      with      skin material   0.25   mm   thick   aluminium sheet        cover        material        natural polyethylene  aluminium  cladding  panel fixed   with   extruded   aluminium   basis frame    (50x25x1.5mm)    angle    cleats, weather sealants, rivets, GI brackets all as  approved,  using  suitable  bolts  on structural steel work including necessary accessories  complete  in  all    respects including   all   scaffolding   and   labour charges etc., complete for finished item of  work  but  excluding  cost  of  structural steel fabrication, if any, ACP Cladding - 4 mm thk 1
Sqm
2387
951 MAT-01586 BMS-W.14 Supplying      and      fixing      aluminium composite      cladding      with      skin material   0.5   mm   thick   aluminium sheet        cover        material        natural polyethylene  aluminium  cladding  panel fixed   with   extruded   aluminium   basis frame    (50x25x1.5mm)    angle    cleats,weather sealants, rivets, GI brackets all as  approved,  using  suitable  bolts  on structural steel work including necessary accessories  complete  in  all    respects including   all   scaffolding   and   labour charges etc., complete for finished item of  work  but  excluding  cost  of  structural steel fabrication, if any, ACP Cladding - 4 mm thk 1
Sqm
2678
952 MAT-01587 BMS-W.15 CEMENT JALI - 25 mm thick 1 sqm 191
953 MAT-01588 BMS-W.16 CEMENT JALI - 40 mm thick 1 sqm 248
954 MAT-01589 BMS-W.17 CEMENT JALI - 50 mm thick 1 sqm 340
955 MAT-01590 BMS-W.18 Aluminium sheet 24 Gauge 1
Sqm
256
956 MAT-01591 BMS-W.19 7.5mm    thick       Aluminium    Grill    (as approved    by    the    department)    3.58 Kg/Sqm. 1
Sqm
941
957 MAT-01592 BMS-W.20 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1
Sqm
839
958 MAT-01593 BMS-W.21 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick Supply   of   hot   pressed   compression moulded  sign  plates  for  making  road signs ass per the approved dimensions of  National  Highway  Authority  Of  India, complete, for finished item of work. 1
Sqm
481
959 MAT-01594 BMS-W.22 Circular sign plate Dia 400mm. Each. 488
960 MAT-01595 BMS-W.23 Circular sign plate Dia 600mm. Each. 1284
961 MAT-01596 BMS-W.24 Circular sing plate Dia 870mm Each. 2574
962 MAT-01597 BMS-W.25 Triangular sign plate 600mm. Each. 659
963 MAT-01598 BMS-W.26 Triangular sign plate 900mm. Each. 1489
964 MAT-01599 BMS-W.27 Square sign plate 600mm. Each. 1194
965 MAT-01600 BMS-W.28 Square sign plate 1000mm. Each. 4433
966 MAT-01601 BMS-W.29 ITEM DELETED    
      Design,   fabrication   &   supply   of   light weight  pre  engineered  buildings  for  a maximum span of 9 metres with 50 x 50 x  2.8  mm  M.S  hollow  square  tubes  for columns,  trusses  &  purlins  walls  with sandwich  panels  made  up  of  2  Nos 10mm   thick   cement   bonded   particle/ fibre boards with 25mm thick 12 kg/cum density     expanded     polystyrene     in between   encased   in   1.25   mm   thick 24x7x26 mm ‘W’ tracks in bottom & top and  ‘H’  section  for  sides  with  doors, windows  &  ventilators,  roofing  with  26 gauge  pre  painted  profiled  sheets  fixed with    self    tapping/    drilling    screws, painting   with   enamel   paint   for   steel items,  OBD  for  interiors  and  ace  for exteriors    &    providing    base    plates, templates & anchor bolts along with civil foundation  designs  &  drawings  for  the finished item of work    
967 MAT-01602 BMS-W.30 Steel  Structure:  -  Structure  is  made  up of  50x50X  2.8  mm/33x66x2.8mm  thick hollow    M.S.    sections    for    Trusses, columns, and purloins. - Columns 1 RM 363
968 MAT-01603 BMS-W.33 Sandwich  panels:  Sandwich  panels  of 50 mm thick with 25 mm thermocol of 12 kg / cum, fixed in between 2 Nos 10 mm cement   bonded   wood   particle   /   fibre boards  properly  fixed  together  with  30 mmx30mmx30mm  wood  pieces  along width & length wherever necessary 1
Sqm
1312
969 MAT-01604 BMS-W.34 U' Tracks & 'H'  Section:-  Bottom & Top 'U'  Tracks  are  made  of  1.25  mm  thick 120  GSM  G.I.  Sheet  of  size  24x51x26 mm size. 1 RM 141
970 MAT-01605 BMS-W.35 Fabricated 'H' sections are made up of 2 Nos 1.25 mm thick C.R. Of 40 mm width for  flanges  and  1  Nos  of  2  mm  thick
C.R. of 50 mm width plate for web. will be used
1 RM 204
971 MAT-01606 BMS-W.36 Sandwich  Panel  joinery  is  made  up  of couplers  or  equivalent  made  from  0.6 mm  G.I.  roll  formed  section  to  hold  2 Nos of 10 mm board on both sides with 25 mm thermocol in between. 1RM 233
972 MAT-01607 BMS-W.37 Window:-  windows  are  made  up  of  51 x51 mm step 'U' section made from 1.25 thick  MS  Cold  rolled  Steel  Sheet  and Windows  Shutters  &  Grill  are  made  of 48x25mm  mm  size  pre  painted  section with    4    mm    glass    complete    with necessary  hardware.  Grills  are   made from   8   mm   square   rod   at   100   mm spacing. 1
Sqm
4211
973 MAT-01608 BMS-W.38 Door  Frames  :-51  X  51  Stepped  '  U' section  made  from  1.25  mm  thick  C.R. section with a 32 mm rebate for 30 mm flush  door  and  Door  Shutters  with  30 mm thick block board / flush doors with boiling  water  proof  plywood  complete with necessary Hard ware. 1
Sqm
3838
974 MAT-01609 BMS-W.39 Ventilators:-   Ventilators   are   made   of 51x51  mm  step  'U'  section  made  From
1.25  mm  thick  C.R.  sheet  with  fixed louvers and glass.
1Sqm 4294
975 MAT-01610 BMS-W.40 Painting:-1)   Steel   structure   is   to   be painted with 2 coats of Grade I enamel paint. 1
Sqm
114
976 MAT-01611 BMS-W.41 2)  Exterior  walls  are  painted  with  one coast  of  primer  and  2  coats  of  exterior emulsion paint . 1
Sqm
102
977 MAT-01612 BMS-W.42 3) Interiors are painted with 1+2 coat of O.B.D. 1
Sqm
85
978 MAT-01613 BMS-W.43 Toilets:  -  Toilets  are  provided  as  per plan with a provision for fixing the wash basin, W.C. etc only  is  made with M.S. steel  section  secured  to  the  walls  with toilet bracket provision excluding cost of WC/ Wash basin etc Each 998
979 MAT-01614 BMS-W.44 Sun   shades:   -   Sun   shades   will   be provided  wherever  necessary  with  300 mm  more  than  the  width  of  window. 25x25 mm angle frame to cover 450 mm in the front and the sides. 10mm cement bonded  particle  board  will  be  fixed  on the  frame  work  and  sealed  with  green paste or equivalent. Each 3364
980 MAT-01615 BMS-W.45 Roofing: - Roofing will be provided with 0.5mm  thick  galvanized  /  pre  painted
G.I.  profiled  sheets  fixed  to  the  purlins with  14  size  self  drilling  screws  with neoprene washer. Side laps are stitched with  self  tapping  /  drilling  screws.  End laps  are  to  be  sealed  with  25x3  mm Butyl tape. The sheets are provided with anti capillary grove.
1
Sqm
760
981 MAT-01617 BMS-W.47 Preparing gabions with jungle wood Each 3
982 MAT-01618 BMS-W.48 Planting plants Each 2
983 MAT-01619 BMS-W.49 Pruning plants Each 3
984 MAT-01620 BMS-W.50 Maintaining avenues including fencing, weeding, mulching, watering etc per plant. Each 7
985 MAT-01621 BMS-W.51 - do -  When scattered in hot weather with extra conveyance from March to June Each 8
986 MAT-01622 BMS-W.52 Hoisting or lowering of slab 1 cum 111
987 MAT-01623 BMS-W.53 Dressing faces of granite stone (double line dressing) 1
Sqm
183
988 MAT-01624 BMS-W.54 Dressing faces of other than granite stone(double line dressing) 1Sqm 114
989 MAT-01625 BMS-W.55 Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours 1
Sqm
386
990 MAT-01626 BMS-W.56 Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours 1
Sqm
377
991 MAT-01627 BMS-W.57 Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours 1
Sqm
339
992 MAT-01628 BMS-W.58 Supply     of     Pre-painted     Galvanized Trapezoidal  Profile  Roofing  sheets  with 0.47mm     thickness,     Coating:     Zinc coating  Z120  GSM.  Tensile  Strength:
300    MPA.    Paint    coating:    Regular Modified   Polyester   painting.   Painting Thickness   (Top):   18   to   20   Microns, (Bottom):  5  to  7  Microns.  Sheet  Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours
1
Sqm
318
993 MAT-01629 BMS-W.59 Supply   of   Roof   Accessories   medium size: Ridge, Barge Cap, Corner Trim, L- Flashing,  Down  Pipes,  Gutter  etc.,  with 0.50mm   thick,   Width:   0.585,   Length: Maximum 2½ Meters 1 RM 260
994 MAT-01630 BMS-W.60 Supply   of   Roof   Accessories   medium size: Ridge, Barge Cap, Corner Trim, L- Flashing,  Down  Pipes,  Gutter  etc.,  with 0.47mm   thick,   Width:   0.585,   Length: Maximum 2½ Meters 1 RM 232
995 MAT-01631 BMS-W.61 75 mm long screws - 1
Each
4
996 MAT-01632 BMS-W.62 G.I scam bolts & nuts 1
Each
5
997 MAT-01633 BMS-W.63 G.I bolts & nuts 1
Each
5
998 MAT-01634 BMS-W.64 G.I ‘J’ bolts 8 mm dia 1
Each
9
999 MAT-01635 BMS-W.65 G.I Washers 1
Each
2
1000 MAT-01636 BMS-W.66 Limpet washers (for scam & ‘J’ bolts) 1
Each
2
1001 MAT-01637 BMS-W.67 Bitumen washers 1
Each
2
1002 MAT-01638 BMS-W.68 White Cement 1 Kg 27
1003 MAT-01639 BMS-W.69 MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA 1
Each
32
1004 MAT-01640 BMS-W.70 Rubber/ Nylon door stop bushes 1
Each
9
1005 MAT-01641 BMS-W.71 Nylon rollers for sliding glasses/ alluminium windows 1
Each
14
1006 MAT-01642 BMS-W.72 Powder coating or colour annodization- any section 1 RM 45
1007 MAT-01643 BMS-W.73 Continuous Piano Hinges Powder coated Mild steel as per IS-3818 : 1992 of nominal size 25 mm (B) of thickness
0.8 to 1.0 mm
1 RM 32
1008 MAT-01644 BMS-W.74 Box hinges for cup boards 1
Each
40
1009 MAT-01645 BMS-W.75 Magnetic Catchers 1
Each
14
1010 MAT-01646 BMS-W.76 Drilling holes in hard rock surfaces up to 18mm dia 1 RM 187
1011 MAT-01647 BMS-W.77 Drilling holes in hard rock above 18mm dia 1 RM 261
1012 MAT-01648 BMS-W.78 Making holes up to 18mm dia in RCC/ any stones up to 50 mm thick 1
Each
32
1013 MAT-01649 BMS-W.79 Making holes above 18mm dia in RCC/ any stones above 50 mm thick 1
Each
44
1014 MAT-01650 BMS-W.80 Pressure  grouting  the  drilled  holes  with neat  cement  slurry   or   with   approved epoxy bonding agent using pump 1
Each
45
1015 MAT-01651 BMS-W.81 ITEM DELETED    
1016 MAT-01652 BMS-W.82 ITEM DELETED    
      CASURINA      BALLIES      /      STEEL BARRICADING    
1017 LAB-00552

BMS-W.83

BMS-W.84

Fixing  steel  barricading  with  MS  Angle Iron Pegs and GI Pipes with nuts & bolts duly   excavating   pits   and   its   removal after   the   function   is   over   including transporting   of   the   entire   barricading materials  from  the  Divisional  stores  to the    barricading    site    duly    engaging labour to load, transport and unload the materials at barricading site & as per the schedule   given   by   the   departmental authorities  and  loading  back  into  the trucks,  unloading  at  Divisional  stores, accounting  for  the  received  materials, labour   for   loading,   unloading,   fixing, handling etc, complete for  finished  item of work 2-TIER (3 days)Providing  barricading  arrangement  with casurina  ballies  as  per  the  design  duly excavating pits and its removal after the function is over including hire charges of the  barricading  materials    a  sper  the schedule   given   by   the   departmental authorities complete for finished item of work  1 RM  35.01
1018 LAB-00553 BMS-W.84.A 2-TIER (2 days) 1 RM 43.63
1019 LAB-00554 BMS-W.84.B 2-TIER (3 days) 1 RM 43.82
1020 LAB-00555 BMS-W.84.C 2-TIER (4 days) 1 RM 44.00
1021 LAB-00556 BMS-W.84.D 3-TIER (2 days) 1 RM 45.63
1022 LAB-00557 BMS-W.84.E 3-TIER (3 days) 1 RM 45.92
1023 LAB-00558 BMS-W.84.F 3-TIER (4 days) 1 RM 46.20
      Testing charges    
    BMS-W.85 Coarse Aggregates    
1024 LAB-00559 BMS-W.85.A Gradation Test 1 No. 600
1025 LAB-00560 BMS-W.85.B. Aggregate Impact Value  Test 1 No. 600
1026 LAB-00561 BMS-W.85.C Flakiness and Elongation Indices Tests 1 No. 700
1027 LAB-00562 BMS-W.85.D Water absorption Test 1 No. 550
1028 LAB-00563 BMS-W.85.E Abrasion Test 1 No. 850
1029 LAB-00564 BMS-W.85.F Specific Gravity Test 1 No. 600
    BMS-W.86 Fine  Aggregates    
1030 LAB-00565 BMS-W.86.A Sieve Analysis Test 1 No. 600
1031 LAB-00566 BMS-W.86.B Bulking & Moisture content 1 No. 600
1032 LAB-00567 BMS-W.86.C Specific Gravity Test 1 No. 600
    BMS-W.87 Cement    
1033 LAB-00568 BMS-W.87.A Fineness of cement Test Each 600
1034 LAB-00569 BMS-W.87.B Initial & Final setting   time   of cement Each 600
    BMS-W.88 Bricks    
1035 LAB-00570 BMS-W.88.A Compressive strength of Bricks Each 350
1036 LAB-00571 BMS-W.88.B Water absorption Test for Brick Each 550
    BMS-W.89 Concrete    
1037 LAB-00572 BMS-W.89.A. Compressive strength of concrete i.e Cube strength test Each 350
1038 LAB-00573 BMS-W.89.B Design mix of one grade   16000
1038 LAB-00574 BMS-W.89.C Design mix of  Two grades   26000
1040 LAB-00575 BMS-W.89.D Design mix of  three  grades   36000
1041 LAB-00576 BMS-W.89.E Design mix of four  grades   43000
1042 LAB-00577 BMS-W.89.F Design mix of  five  grades   51000
      Steel    
1043 LAB-00578 BMS-W.90 Tensile Strength of Each Dia 1 set (3 rods) Each 700
    BMS-W.91 Soils    
1044 LAB-00579 BMS-W.91.A G.S.B  Mix design Each 5000
1045 LAB-00580 BMS-W.91.B W.M.M Mix design Each 6100
1046 LAB-00581 BMS-W.91.C B.M   Mix design Each 7500
1047 LAB-00582 BMS-W.91.D SDBC/BC Each 8100
1048 LAB-00583 BMS-W.91.E UD samples Each 1800
1049 LAB-00584 BMS-W.91.F Soils MDD and CBR Each 3700
    Note: Item  BMS-W.46   is  removed in the section W  and is brought as  new item in the Section N  as  BMT-N.82.  
    X. MACHINERY        CHARGES,        HIRE CHARGES FOR CENTRING    
1050 MAT-01653 BMC-X.01 Machine charges of rubbing/ polishing floor 1 day 1749
1051 HIR-00206 BMC-X.02 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 102
1052 HIR-00207 BMC-X.03 Power Drill - Hand Operated - Hire Charges 1 Hr 95
1053 MAT-01656 BMC-X.04 Grinding Mortar (Spl Grinding) 1 day 874
1054 MAT-01657 BMC-X.05 Casuarina Balli Props - 3" to 4" dia - 12'- 0" Height Each 60
1055 MAT-01658 BMC-X.06 Casuarina Balli Props - 4" to 8" dia - 20'-0" Height Each 99
1056 MAT-01659 BMC-X.07 Wall Plate Brackets / beam bottom supports Each 174
1057 MAT-01660 BMC-X.08 Wedge Plate fixture Each 9
1058 MAT-01661 BMC-X.09 Runner beams of approximately 4" x 4" size RM 347
1059 MAT-01662 BMC-X.10 Steel Plates for form works 1 sqm 1312
1060 MAT-01663 BMC-X.11 Scaffolding Pipes & Centering accessories 1 Kg 99
1061 MAT-01664 BMC-X.12 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long Each 107
1062 MAT-01665 BMC-X.13 Hire charges for stationary Concrete pump conforming to IS 21573 Part-1: 2006 to deliver the fresh green concrete 1 Hr 280
1063 MAT-01666 BMC-X.14 Concrete delivery pipes conforming to IS 15947 Part I: 2012 to be connected to the pump to delivery point (150 mm Diameter) hire charges per 10 RM 1 Hr 4

1 All the items to be used on the works shall be of first quality & ISI marked wherever possible and as approved, workmanship shall be as approved by the Engineer-In-charge of the work.

2 Supply Rates for all the materials are based on market rates excluding GST.

3 SSR Rates for Building items are purely for the guidance of the officers in preparation of estimates vide para.113 ofAPPWD code. Authority who prepares the estimate is however responsible for proper rates as envisaged in para.45 of APPWD code.

LEGEND:

"BMT" -X.XX,

"BMM"-X.XX,

"BMS"-X.XX,

"BMC"-X.XX XXX-"A"

XX - Denotes the Section

XXX-X."01" - Denotes the Serial Number of the Item in the corresponding Section

Sl NAME OF THE STRUCTURAL MEMBER Material Hire charges Labour charges Centring
Charges for 2019-20
Unit of Measurement
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING
A FOOTINGS Rs. 288 Rs. 631 Rs. 919 per 1 cum
B BED BLOCKS, BANDS Rs. 64 Rs. 341 Rs. 405 per 1 cum
C PEDESTALS Rs. 328 Rs. 1004 Rs. 1332 per 1 cum
D PLINTH BEAMS Rs. 1390 Rs. 1521 Rs. 2911 per 1 cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,
E LINTELS Rs. 1180 Rs. 1615 Rs. 2795 per 1 cum
F CHAJJAS - SUNSHADES Rs. 233 Rs. 248 Rs. 481 per 1 sqm
G COLUMNS Rs. 355 Rs. 2268 Rs. 2623 per 1 cum
H BEAMS Rs. 2085 Rs. 1903 Rs. 3988 per 1 cum
I SLABS - Up to 150 mm thick Rs. 236 Rs. 226 Rs. 462 per 1 sqm
J SLABS - above 150 mm - Up to 300 mm thick Rs. 243 Rs. 233 Rs. 476 per 1 sqm
K SLABS - above 300 mm thick Rs. 254 Rs. 244 Rs. 498 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams with Slabs) Rs. 858 Rs. 783 Rs. 1641 per 1 sqm
M PERGOLA SLABS (Only Rib Beams) Rs. 602 Rs. 549 Rs. 1151 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 2370 Rs. 2163 Rs. 4533 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 2404 Rs. 2193 Rs. 4597 per 1 cum
P DOME SLABS Rs. 3833 Rs. 3496 Rs. 7329 per 1 cum
Q HELICAL STAIRCASES Rs. 292
Rs.
267 Rs. 559 per 1 sqm
R SHEAR WALLS, RCC WALLS, WATER
TANK WALLS
DELETED
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M Casurina Ballies, Bamboos,
Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
E LINTELS Rs. 790 Rs. 1251 Rs. 2041 per 1 cum
F CHAJJAS - SUNSHADES Rs. 156 Rs. 192 Rs. 348 per 1 sqm
G COLUMNS Rs. 238 Rs. 1757 Rs. 1995 per 1 cum
H BEAMS Rs. 1395 Rs. 1473 Rs. 2868 per 1 cum
I SLABS - Up to 150 mm thick Rs. 158 Rs. 175 Rs. 333 per 1 sqm
J SLABS - above 150 mm - Up to 300 mm thick Rs. 163 Rs. 181 Rs. 344 per 1 sqm
K SLABS - above 300 mm thick Rs. 170 Rs. 189 Rs. 359 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams with
Slabs)
Rs. 575 Rs. 607 Rs. 1182 per 1 sqm
M PERGOLA SLABS (Only Rib Beams) Rs. 403 Rs. 425 Rs. 828 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 1586 Rs. 1675 Rs. 3261 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 1609 Rs. 1698 Rs. 3307 per 1 cum
P DOME SLABS Rs. 2566 Rs. 2708 Rs. 5274 per 1 cum
Q HELICAL STAIRCASES Rs. 196 Rs. 207 Rs. 403 per 1 sqm
R SHEAR WALLS, RCC WALLS,
WATERTANK WALLS
DELETED

 

Sl NAME OF THE STRUCTURAL MEMBER Material Hire charges Labour charges Centring
Charges for 2018-19
Unit of Measurement
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area)
A 1st - Floor Rs. 10.32 Rs. 79.46 Rs. 89.78 per 1 sqm
B 2nd - Floor Rs. 10.32 Rs. 113.78 Rs. 124.10 per 1 sqm
C 3rd - Floor Rs. 10.32 Rs. 148.09 Rs. 158.41 per 1 sqm
D 4th - Floor Rs. 10.32 Rs. 182.41 Rs. 192.73 per 1 sqm
E 5th - Floor Rs. 10.32 Rs. 216.72 Rs. 227.04 per 1 sqm
F 6th - Floor Rs. 10.32 Rs. 251.03 Rs. 261.35 per 1 sqm
G 7th - Floor Rs. 10.32 Rs. 285.33 Rs. 295.65 per 1 sqm
H 8th - Floor Rs. 10.32 Rs. 319.65 Rs. 329.97 per 1 sqm
I 9th - Floor Rs. 10.32 Rs. 353.97 Rs. 364.29 per 1 sqm
J 10th - Floor Rs. 10.32 Rs. 388.27 Rs. 398.59 per 1 sqm
K 11th - Floor Rs. 10.32 Rs. 422.59 Rs. 432.91 per 1 sqm
L 12th - Floor Rs. 10.32 Rs. 456.91 Rs. 467.23 per 1 sqm
m 13th - Floor Rs 10.32 Rs 491.22 Rs 501.54 per 1 sqm
n 14th - Floor Rs 10.32 Rs 525.52 Rs 535.84 per 1 sqm
o 15th - Floor Rs 10.32 Rs 559.84 Rs 570.16 per 1 sqm

HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for PLASTERING to WALLS - 1 sqm

  NAME OF THE STRUCTURAL MEMBER Material Hire charges Labour charges CentringCharges for 2018-19 Unit of Measurement
1 2 3 4 5 6
A 1st - Floor Rs. 1.03 Rs. 7.95 Rs. 8.98 per 1 sqm
B 2nd - Floor Rs. 1.03 Rs. 11.38 Rs. 12.41 per 1 sqm
C 3rd - Floor Rs. 1.03 Rs. 14.81 Rs. 15.84 per 1 sqm
D 4th - Floor Rs. 1.03 Rs. 18.24 Rs. 19.27 per 1 sqm
E 5th - Floor Rs. 1.03 Rs. 21.67 Rs. 22.7 per 1 sqm
F 6th - Floor Rs. 1.03 Rs. 25.10 Rs. 26.13 per 1 sqm
G 7th - Floor Rs. 1.03 Rs. 28.53 Rs. 29.56 per 1 sqm
H 8th - Floor Rs. 1.03 Rs. 31.97 Rs. 33 per 1 sqm
I 9th - Floor Rs. 1.03 Rs. 35.40 Rs. 36.43 per 1 sqm
J 10th - Floor Rs. 1.03 Rs. 38.83 Rs. 39.86 per 1 sqm
K 11th - Floor Rs. 1.03 Rs. 42.26 Rs. 43.29 per 1 sqm
L 12th - Floor Rs. 1.03 Rs. 45.69 Rs. 46.72 per 1 sqm
M 13th - Floor Rs. 1.03 Rs. 49.12 Rs. 50.15 per 1 sqm
N 14th - Floor Rs. 1.03 Rs. 52.55 Rs. 53.58 per 1 sqm
O 15th - Floor Rs. 1.03 Rs. 55.98 Rs. 57.01 per 1 sqm
HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm
A 1st - Floor Rs. 2.46 Rs. 15.91 Rs. 18.37 per 1 sqm
B 2nd - Floor Rs. 2.46 Rs. 22.57 Rs. 25.03 per 1 sqm
C 3rd - Floor Rs. 2.46 Rs. 29.23 Rs. 31.69 per 1 sqm
D 4th - Floor Rs. 2.46 Rs. 35.90 Rs. 38.36 per 1 sqm
E 5th - Floor Rs. 2.46 Rs. 42.56 Rs. 45.02 per 1 sqm
F 6th - Floor Rs. 2.46 Rs. 49.22 Rs. 51.68 per 1 sqm
G 7th - Floor Rs. 2.46 Rs. 55.89 Rs. 58.35 per 1 sqm
H 8th - Floor Rs. 2.46 Rs. 62.55 Rs. 65.01 per 1 sqm
I 9th - Floor Rs. 2.46 Rs. 69.22 Rs. 71.68 per 1 sqm
J 10th - Floor Rs. 2.46 Rs. 75.88 Rs. 78.34 per 1 sqm
K 11th - Floor Rs. 2.46 Rs. 82.54 Rs. 85 per 1 sqm
L 12th - Floor Rs. 2.46 Rs. 89.21 Rs. 91.67 per 1 sqm
M 13th - Floor Rs. 2.46 Rs. 95.80 Rs. 98.26 per 1 sqm
N 14th - Floor Rs. 2.46 Rs. 102.53 Rs. 104.99 per 1 sqm
O 15th - Floor Rs. 2.46 Rs. 109.20 Rs. 111.66 per 1 sqm

CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES
for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 3.66 M

FLOOR   LINTELS CHAJJA S - SUNSHA DES COLUM NS BEAM S SLAB S -
Up to 150
mm thick
SLABS -
above 150 mm
- Up to
300 mm thick
SLABS -
above 300 mm thick
WAFFLE - (GRID) SLABS
(Rib
Beams with Slabs)
PERG LA
SLAB
(Only Rib
Beam
ARCH BEAMS
- up to
1.5 M Span
ARCH BEAMS
- above
1.5 M Span
DOME SLABS HELICAL STAIR- CASES
Material Hire for any Floor H 1180 233 355 2085 236 243 254 858 602 2370 2404 3833 292
Labour Charges for 1st
Floor
L 1615 248 2268 1903 215 222 232 783 549 2163 2193 3496 267
Total Hire Charges (H+L) T 2795 481 2623 3988 451 465 486 1641 1151 4533 4597 7329 559
                             
1st - Floor L 1615 248 2268 1903 215 222 232 783 549 2163 2193 3496 267
2nd - Floor L 1777 273 2495 2093 237 244 255 861 604 2379 2412 3846 294
3rd - Floor L 1938 298 2722 2284 258 266 278 940 659 2596 2632 4195 320
4th - Floor L 2100 322 2948 2474 280 289 302 1018 714 2812 2851 4545 347
5th - Floor L 2261 347 3175 2664 301 311 325 1096   3028 3070 4894 374
6th - Floor L 2423 372 3402 2855 323 333 348 1175 824 3245 3290 5244 401
7th - Floor L 2584 397 3629 3045 344 355 371 1253 878 3461 3509 5594 427
8th - Floor L 2746 422 3856 3235 366 377 394 1331 933 3677 3728 5943 454
9th - Floor L 2907 446 4082 3425 387 400 418 1409 988 3893 3947 6293 481
10th - Floor L 3069 471 4309 3616 409 422 441 1488 1043 4110 4167 6642 507
11th - Floor L 3230 496 4536 3806 430 444 464 1566 1098 4326 4386 6992 534
12th - Floor L 3392 521 4763 3996 452 466 487 1644 1153 4542 4605 7342 561
13th - Floor L 3553 546 4990 4187 473 488 510 1723 1208 4759 4825 7691 587
14th - Floor L 3715 570 5216 4377 495 511 534 1801 1263 4975 5044 8041 614
15th - Floor L 3876 595 5443 4567 516 533 557 1879 1318 5191 5263 8390 641
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above 3.66 M, may be allowed at 16.666% more than the basic material hire charges and relevant labour charges of the applicable floor and item

CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES
for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel Centring Plates etc., for unsupported height 3.66 M

FLOOR   LINTEL S CHAJJAS - SUNSHADE S COLUMN S BEAMS SLABS -
Up to 150 mm thick
SLABS -
above 150 mm
- Up to 300 mm thick
SLABS
- above 300 mm thick
WAFFLE - (GRID) SLABS
(Rib Beams with
Slabs)
PERGOLA SLABS
(Only Rib Beams)
ARCH BEAM
S - up to 1.5 M
Span
ARCH BEAMS
- above
1.5 M Span
DOME SLAB S HELICAL STAIRCASES
Material Hire for any Floor H 790 156 238 1395 158 <