BUILDING WORKS

BUILDING WORKS (G) WOOD AND PVC WORKS (SECTION – 1)

Item No.	Description of Items	Rate (Rs)
Item No.	Description of Items	Unit	Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div	Purba Bardhaman Paschim Bardhaman	Purulia	Birbhum	Howrah/ Hoogly	Purba Medinipur	Paschim Medinipur/Jhargram	Bankura	Nadia excluding area of Kalyani Sub Div	Murshidabad	Malda	Darjeeling, Kalimpong except plains of Siliguri Sub Divn.	Jalpaiguri,Alipurduar, plains of Siliguri Sub Divn. & Area of Haldibari PS	Coochbehar excluding the area of Haldibari PS	Uttar/ Dakshin Dinajpur Dist.	REMARKS
	(a) Ordinary Teak Wood.	Sqm	3031	2925	2713	2713	3031	2925	2713	2713	2819	2819	2819	2819	2819	2819	2819
	(b)Sishu,Gamar,Champ,Badam,Bhola,Mogra,Hallak.	Sqm	2279	2185	2185	2185	2279	2185	2185	2185	2185	2185	2185	2237	2185	2185	2185
	(c) Other Local Wood.	Sqm	1588	1483	1483	1483	1588	1483	1483	1483	1483	1483	1483	1483	1494	1494	1494
	Note: i) Lifting Charges for upper floors refer iteH (2).
7	Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4kg. Per sq.m./3mm thick) fitted with putty bed and teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor.
	(i) 50mm. Thick shutters with 25mm thick panel.
	(a) 1st class best Indian teak.	Sqm	7143	6535	6301	6301	7143	6301	6254	6254	6254	6254	6254	6535	6254	6254	6254
	(b) Ordinary teak.	Sqm	5595	5361	4893	4893	5595	5361	4893	4893	5127	5127	5127	5127	5127	5127	5127
	(ii) 40mm thick shutters with 19mm thick panel.
	(a) Ordinary Teak Wood.	Sqm	4734	4548	4176	4176	4734	4548	4176	4176	4362	4362	4362	4362	4362	4362	4362
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	3414	3248	3248	3248	3414	3248	3248	3248	3248	3248	3248	3340	3248	3248	3248
	(c) Other Local Wood.	Sqm	2196	2012	2012	2012	2196	2012	2012	2012	2012	2012	2012	2012	2030	2030	2030
	(iii) 35mm thick shutters with 19mm thick panel.
	(a) Ordinary Teak Wood.	Sqm	4375	4209	3876	3876	4375	4209	3876	3876	4043	4043	4043	4043	4043	4043	4043
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	3194	3046	3046	3046	3194	3046	3046	3046	3046	3046	3046	3129	3046	3046	3046
	(c) Other Local Wood.	Sqm	2105	1941	1941	1941	2105	1941	1941	1941	1941	1941	1941	1941	1957	1957	1957
	(iv) 25mm thick shutters with 12mm thick panel.
	(a) Ordinary Teak Wood.	Sqm	3381	3266	3034	3034	3381	3266	3034	3034	3150	3150	3150	3150	3150	3150	3150
	(b)Sishu,Gamar,Champ,Badam,Bhola,Mogra,Hallak.	Sqm	2259	2455	2455	2455	2455	2559	2455	2455	2455	2455	2455	2513	2455	2455	2455
	(c) Other Local Wood.	Sqm	1799	1684	1684	1684	1799	1684	1684	1684	1684	1684	1684	1684	1696	1696	1696
	Note: i) Lifting Charges for upper floors refer item H (2).
	(ii) In case of panel with Rly. Type battens the rate will be reduced by Rs. 12.00 per Sq.m]
8	Shutter of 1/3rd fixed louvered, 2/3rd glazed of doors as per design (with ordinary glass of 7.4kg per sq.m./3mm. Thick) fixed with putty bed, teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor.
	(i) 50mm thick shutters with 19mm thick valve.
	(a) 1st class best Indian teak.	Sqm	5928	5447	5262	6262	5928	5262	5225	5225	5225	5225	5225	5447	5225	5225	5225
	(b) Ordinary teak.	Sqm	4707	4522	4152	4152	4707	4522	4152	4152	4337	4437	4337	4337	4337	4337	4337
	(ii) 40mm thick shutters with 12mm thick valve.
	(a) Ordinary Teak Wood.	Sqm	3990	3845	3555	3555	3990	3845	3555	3555	3700	3700	3700	3700	3700	3700	3700
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	2959	2829	2829	2829	2959	2959	2829	2829	2829	2829	2829	2829	2901	2829	2829
	(c) Other Local Wood.	Sqm	2007	1863	1863	1863	2007	1863	1863	1863	1863	1863	1863	1863	1878	1878	1878
	(iii) 35mm thick shutters with 12mm thick valve.
	(a) Ordinary Teak Wood.	Sqm	3522	3398	3149	3149	3149	3522	3398	3149	3149	3273	3273	3273	3273	3273	3273
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	2640	2529	2529	2640	2529	2529	2529	2529	2529	2591	2529	2591	2529	2529	2529
	(c) Other Local Wood.	Sqm	1826	1703	1703	1703	1703	1826	1703	1703	1703	1703	1703	1703	1715	1715	1715
	(iv) 25mm thick shutters with 12mm thick valve.
	(a) Ordinary Teak Wood.	Sqm	2897	2803	2616	2616	2897	2803	2616	2616	2710	2710	2710	2710	2710	2710	2710
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	2232	2148	2148	2148	2232	2148	2148	2148	2148	2148	2148	2148	2148	2148	2148
	(c) Other Local Wood.	Sqm	1619	1526	1526	1526	1619	1526	1526	1526	1526	1526	1526	1526	1536	1536	1536
	Note: i) Lifting Charges for upper floors refer item H (2).
9	Shutters 2/3 fixed louvered, 1/3rd glazed of doors and windows as per design (with ordinary glass of 7.4kg. Per sq.m./3mm. Thick) fitted with putty beds, teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor.
	(i) 50mm thick shutters with 19mm thick valve.
	(a) 1st class best Indian teak.	Sqm	6551	6021	5817	5817	6551	5817	5777	5777	5777	5777	5777	6021	5777	5777	5777
	(b) Ordinary Teak.	Sqm	5206	5003	4595	4595	5206	5003	4595	4595	4799	4799	4799	4799	4799	4799	4799
	(ii) 40mm thick shutters with 12mm thick valve.
	(a) Ordinary Teak Wood.	Sqm	4363	4206	3893	3893	4363	4206	3893	3893	4049	4049	4049	4049	4049	4049	4049
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	3249	3109	3109	3109	3249	3109	3109	3109	3109	3109	3109	3186	3109	3109	3109
	(c) Other Local Wood.	Sqm	2223	2068	2068	2068	2223	2068	2068	2068	2068	2068	2068	2068	2083	2083	2083
	(iii) 35mm thick shutters with 12mm thick valve.
	(a) Ordinary Teak Wood.	Sqm	4026	3888	3612	4023	3888	3612	3612	3750	3750	3750	3750	3750	3750	3750	3750
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	304	2921	2921	2921	3044	2921	2921	2921	2921	2921	2921	2990	2921	2921	2921
	(c) Other Local Wood.	Sqm	2141	2004	2004	2004	2141	2004	2004	2004	2004	2004	2004	2004	2018	2018	2018
	(iv) 25mm thick shutters with 12mm thick valve.
	a) Ordinary Teak Wood.	Sqm	3182	3076	2866	2866	3182	3076	2866	2866	2971	2971	2971	2971	2971	2971	2971
	(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.	Sqm	2433	2339	2339	2339	2433	2339	2339	2339	2339	2339	2339	2391	2339	2339	2339
	(c) Other Local Wood.	Sqm	1744	1640	1640	1640	1744	1640	1640	1640	1640	1640	1640	1640	1650	1650	1650
	Note: i) Lifting Charges for upper floors refer item H (2).
10	Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings inground floor.
	(A) Shutter with 25mm thick planks, 19mm thick battens.
	(i) Sal : Local.	Sqm	3197	3031	3031	3031	3197	3031	3031	3031	3031	3031	3031	3031	2994	2994	2994
	(ii) Sal : Malayasian	Sqm	3393	3123	3123	3123	3393	3123	3142	3142	3142	3142	3197	-	-	-	-
	(iii) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak.	Sqm	2750	2616	2616	2616	2750	2616	2616	2616	2616	2616	2616	2690	2616	2616	2616
	(iv) Other Local Wood	Sqm	1924	1739	1739	1739	1924	1739	1739	1739	1739	1739	1739	1739	1758	1758	1758
	(B) Shutter with 19mm thick planks, 19mm thick battens.
	(i) Sal : Local.	Sqm	2795	2661	2661	2661	2795	2661	2661	2661	2661	2661	2661	2661	2631	2631	2631
	(ii) Sal : Malayasian	Sqm	2953	2735	2735	2735	2953	2735	2750	2750	2750	2750	2795	-	-	-	-
	(iii) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak.	Sqm	2750	2616	2616	2616	2750	2616	2616	2616	2616	2616	2616	2690	2616	2616	2616
	(iv) Other Local Wood	Sqm	1767	1618	1618	1767	1618	1618	1618	1618	1618	1618	1618	1618	1633	1633	1633
	Note: i) Lifting Charges for upper floors refer item H (2).
11	Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
	(a) 35 mm thick shutters (single leaf)	Sqm	2659	2659	2659	2659	2659	2659	2659	2659	2659	2659	2659	3405	2659	2659	2659
	(b) 32 mm thick shutters (single leaf)	Sqm	2359	2359	2359	2359	2359	2359	2359	2359	2359	2359	2359	3016	2359	2359	2359
	(For upper floors refer to item H(4) also)
12	Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:
	(a) 35 mm thick shutters (single leaf)	Sqm	3955	3955	3955	3955	3955	3955	3955	3955	3955	3955	3955	4334	3955	3955	3955
	(b) 25 mm thick shutters (single leaf)	Sqm	3783	3783	3783	3783	3783	3783	3783	3783	3783	3783	3783	4144	3783	3783	3783
	(For upper floors refer to item H(4) also)
13.	Extra over item No. B (11,12) for providing:
	(a) Vision aperture (round or retangular in shape) with 7.4kg. Per sq.m./ 3mm thick glass pane with wooden beads. (Cost of glass panes and wooden beads will be paid separately).	Each	33	33	33	33	33	33	33	33	33	33	33	33	33	33	33
	(b) Rabbet cutting in shutters [Note: Mode of measurement-Measurement shall be made on the basis of area of shutter]	Sqm	45	45	45	45	45	45	45	45	45	45	45	45	45	45	45
	(c) Double leaf shutters [Note: Mode of measurement-Measurement shall be made on the basis of area of shutter]	Sqm	30	30	30	30	30	30	30	30	30	30	30	30	30	30	30
	(For upper floors refer to item H(4) also)
14	Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.
	In ground floor.
	(i) 32 mm thick	Sqm	2763	2763	2763	2763	2763	2763	2763	2763	2763	2763	2763	2892	2763	2763	2763
	(ii) 25 mm thick	Sqm	2581	2581	2581	2581	2581	2581	2581	2581	2581	2581	2581	2701	2581	2581	2581
	(For upper floors refer to item H(4) also)
15	Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th.both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.	Sqm	1943	1943	1943	1943	1943	1943	1943	1943	1943	1943	1943	2029	1943	1943	1943
16	Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge.	Sqm	2438	2438	2438	2438	2438	2438	2438	2438	2438	2438	2438	2549	2438	2438	2438
17	Supplying, Fitting & Fixing 30 mm thick Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.	Sqm	2278	2278	2278	2278	2278	2278	2278	2278	2278	2278	2278	2381	2278	2278	2278
18	Supplying, Fitting & Fixing 30 mm thick thick both side prelaminated Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.	Sqm	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714	2714
	(For upper floors refer to item H(4) for items 16, 17, 18 & 19 under sub-head B )
19	Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge.
	(a)Plain Colour	Mtr	516	516	516	516	516	516	516	516	201	516	516	516	516	516	516
	(b) Pre-laminated Colour.	Mtr	562	562	562	562	562	562	562	562	562	562	562	562	562	562	562
20	Supplying, fitting & fixing factory made solid panel foam PVC (density shall not be less than 600 kg/cum) door shutter consisting of 19 SWG thick M.S. tube of size 40mm X 20mm for styles and top, lock & bottom rail and welded together to form outer framework including a coat of approved make steel primer. M.S. frame shall be covered with 5mm thick heat moulded PVC channel to form 30mm X 100mm styles and 5mm thick PVC sheet on either side of panel to form 30mm X 125mm top, lock & bottom rail where 15mm (5mm X 3) thick and 20mm wide PVC sheet to be provide as gap insert for top & bottom rail. For panel 10mm PVC sheet to be fitted with stiles & rails with 30mm X 5mm PVC sheet beading on either side of panel and additional 30mm PVC beading as gap insert below top & bottom rail on either side of panel joined together using solvent cement adhesive. Anadditional 5mm thick and 20mm wide PVC strip to be stuck on the interior side of the PVC channel using using solvent cement adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In Ground floor. 30mm thick single leaf shutter with 10mm thick panel.
	(a) Plain Colour.	Mtr	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907	2907
	(b) Pre-laminated Colour.	Mtr	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132	3132
21	Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge.
	a) Factory made Single piece non decorative extruded PVC profiles door shutter(mat / plain finish)	Sqm	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348	2348
	b) Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish:	Sqm	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727	2727
22	35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitred cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 8 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.
	a) Factory made Single piece non decorative extruded PVC tapered profiles door shutter(mat / plain finish)	Sqm	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563	2563
	b) Factory made Single piece extruded PVC laker coated tapered profile door shutter of both side laminated wood grains decorative Finish	Sqm	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872	2872
23	Providing and fixing 30 mm thick factory made solid PUF (Poly Urethene Foam) core solid PVC shutter shall consists of periferial frame made out of 19 mmX 19mm 19 gauge M S Tube . The core panel shall consist of 20 mm thick high density of PUF conforming to IS:12436-1988. 5 mm thick PVC sheet to be fixed on both face of the MS frame. The door on all the edge to be sealed with lipping of 10 mm (5x2 mm) thick x 20 mm wide PVC sheet by using solvent cement.20 mm th. partcle board should be Inserted for locking arrangement.
	a) Single pices extruded Puf insulated door shutter, Matt/Plain finish	Sqm	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550	3550
	b) Single pices extruded Puf insulated door shutter of both side laminated wood grains decorative Finish	Sqm	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237	4237
24	Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter, wood free consisting of frame made out of 25 mm, M.S. tube, M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High Density EPS. With 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with raised panel design in different plain and /or prelam colours after routing the moulded design on one side & 2 mm plain and/ or prelam PVC sheet on other side of the EPS. The edge of Panel to be sealed with lipping of 10 mm wide P.V.C. sheet batten made by sticking 2 Nos P.V.C. rigid foam sheet of 5 mm thickness using P.V.C. solvent cement and style sides 25 mm [5x5 mm] th. and 30 mm with PVC sheet fitted along M.S. tube for lock provision and for lock height 5 mm thick PVC sheet [150 mmx100 mm] fixed with upper and lower face of inner side of EPS Panel etc. complete excluding hardwares as necessary as per direction of Engineer-in-Charge and Manufacturer?s Specification. In ground floor.
	(a) Moulded door using 2 mm moulded PVC sheet or 2 mm etched moulded PVC sheet on one side & 2 mm PVC sheet on other side.	Sqm	2655	2655	2655	2655	2655	2655	2655	2655	2655	2655	2655	2777	2655	2655	2655
	(b) Moulded door using 2 mm Prelam moulded PVC sheet on both side	Sqm	3019	3019	3019	3019	3019	3019	3019	3019	3019	3019	3019	3158	3019	3019	3019
	(For upper floors refer to item H(4) also)
25	Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter, consisting of solid core single leaf flash door of 30 mm thickness lipped with 15 mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2] thick x 30 mm wide of the other style and bottom rail. The inner panel laminated with 2 mm thick termite proof water proof and fire resistant moulded PVC sheet with raised panel designed in different plain/ or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive on flash door and solvent cement adhesive on the PVC lipping etc. complete excluding hardwares as necessary as per direction of Engineer-in Charge, Manufacturer?s Specification and drawing.. In ground floor.
	(a) Moulded door using 2 mm moulded PVC sheet or 2 mm etched moulded PVC sheet on one side & 2 mm PVC sheet on other side.	Sqm	3272	3272	3272	3272	3272	3272	3272	3272	3272	3272	3272	3425	3272	3272	3272
	(b) Moulded door using 2 mm Prelam moulded PVC sheet on both side.	Sqm	3636	3636	3636	3636	3636	3636	3636	3636	3636	3636	3636	3806	3636	3636	3636
	(For upper floors refer to item H(4) also)
26	PVC Door Shutter-37 mm thick:
	Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor.	Sqm.	2287	2287	2287	2287	2287	2287	2287	2287	2287	2287	2287	2389	2287	2287	2287
	(For upper floors refer to item H(4) also)
27	PVC Door Shutter-30 mm thick:
	Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.	Sqm	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127	2127
	(For upper floors refer to item H(4) also)
	C. MISCELLANEOUS WOODWORK
1	(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)
	(i) Sal : Siliguri.	Cum	98177	87287	87287	87287	98177	87287	87287	87287	87287	85173	85173	82001	82001	82001	85173
	(ii) Sal : Local.
	(iii) Sal : Malayasian
	(B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)
	(i) Sal : Siliguri.
	(ii) Sal : Local.
	(iii) Sal : Malayasian
	(B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)
	(i) Sal : Siliguri.
	(ii) Sal : Local.
	(iii) Sal : Malayasian
	Note: Extra for Lifting Charges:- i) upto 4th floor Rs. 200/- per Cu.m per Floor. ii) Above 4th floor Rs. 250/- per Cu.m per Floor
2	Wood work in beams and burgahs fitted and fixed in position complete. (Cost for repairing of Damage to be paid separately)
	(i) Sal : Siliguri.	Cum	87650	76760	76760	76760	87650	76760	76760	76760	76760	74646	74646	71474	71474	71474	74646
	(ii) Sal : Local.	Cum	73495	65854	65854	65854	73495	65854	66377	66377	66377	66377	67946	-	-	-	-
	(iii) Sal : Malayasian	Cum	67951	63237	63237	63237	67951	63237	63237	63237	63237	63237	63237	63237	6291	62191	6291
	Note: Extra for Lifting Charges:- i) upto 4th floor Rs. 200/- per Cu.m per Floor ii) Above 4th floor Rs. 250/- per Cu.m per Floor
3	Wood work in upper rails of railing, hand rail of staircase, balcony etc. including necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square).
	(a) 1st class best Indian teak.	Cum	165247	150885	145361	145361	165247	145361	144255	144255	144255	144255	144255	150885	144255	144255	144255
	(b) Ordinary teak.	Cum	128788	123264	112215	112215	128788	123265	112215	112215	117739	117739	117739	117739	117739	117739	117739
	(c) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak.	Cum	89541	84616	84616	84616	89541	84616	84616	84616	84616	84616	87352	87352	84616	84616	84616
	(d) Other Local Wood.	Cum	40077	34592	34592	34592	40077	34592	34592	34592	345925	34592	34592	34592	35141	35141	35141
	Note: Extra for Lifting Charges:- i) upto 4th floor Rs. 200/- per Cu.m per Floor ii) Above 4th floor Rs. 250/- per Cu.m per Floor
	(a) Supplying fitting and fixing door made with IRC fabric mesh of 75mm x 50mmx4.5mmx2.7mm on 50mm x 50mm x 6mm angle iron frames all round and one 37.5mm x 6mm M.S. flat bar over the netting all round welded to angle iron frame and providing locking arrangements if necessary and with two coats of synthetic enamel paint(Other than Hi-gloss) fitted and fixed with clamps or haskal doomney etc. complete including flat stiffeners on every 1.0 m apart both ways. ( Cost of Concrete for fixing will be paid separately)	Sqm	2449	2449	2449	2449	2449	2449	2449	2449	2449	2449	2449	2457	2449	2449	2449
5	Wooden venetian/ Louvered valves, fitted and fixed with plated hooks complete:
	(i) 19mm thick valves.
	(a) 1st class best Indian teak.	Sqm	2467	2312	2253	2253	2467	2253	2241	2241	2241	2241	2241	2312	2241	2241	2241
	(b) Ordinary teak.	Sqm	2075	2015	1896	1896	2075	2015	1896	1896	1956	1956	1956	1956	1956	1956	1956
	(ii) 12mm thick valves. (Size 360 x 100 mm)
	(a) 1st class best Indian Teak.	Sqm	1951	1851	1812	1812	1951	1812	1805	1805	1805	1805	1805	1851	1805	1805	1805
	(b) Ordinary Teak Wood.	Sqm	1697	1658	1582	1582	1697	1658	1582	1582	1620	1620	1620	1620	1620	1620	1620
	(c) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.	Sqm	1424	1389	1389	1389	1424	1389	1389	1389	1389	1389	1389	1408	1389	1389	1389
	(d) Other Local Wood.	Sqm	1172	1134	1134	1134	1172	1134	1134	1134	1134	1134	1134	1134	1138	113	1138
	(This is a repair item. Item No. E (31) or E (32) will be admissible in addition).
	E. REPAIR WORKS
	(a) 1st class best Indian teak.	Sqm	2467	2312	2253	2253	2467	2253	2241	2241	2241	2241	2241	2312	2241	2241	2241
	(b) Ordinary teak.	Sqm	2075	2015	1896	1896	2075	2015	1896	1896	1956	1956	1956	1956	1956	1956	1956
	(ii) 12mm thick valves. (Size 360 x 100 mm)
	(a) 1st class best Indian Teak.	Sqm	1951	1851	1812	1812	1951	1812	1805	1805	1805	1805	1805	1851	1805	1805	1805
	(b) Ordinary Teak Wood.	Sqm	1697	1658	1582	1582	1697	1658	1582	1582	1620	1620	1620	1620	1620	1620	1620
	(c) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.	Sqm	1424	1389	1389	1389	1424	1389	1389	1389	1389	1389	1389	1408	1389	1389	1389
	(d) Other Local Wood.	Sqm	1172	1134	1134	1134	1172	1134	1134	1134	1134	1134	1134	1134	1138	113	1138
	(This is a repair item. Item No. E (31) or E (32) will be admissible in addition).
6	Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete	Sqm	834	834	834	834	834	834	834	834	834	834	834	755	834	834	834
7	Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete.:
	(a) Ordinary teak	Mtr.	104	100	93	93	104	100	93	93	97	97	97	97	97	97	97
	(b) Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak	Mtr	79	76	76	76	79	76	76	76	76	76	76	77	76	76	76
8	Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete : In ground floor
	(i) 25mm thick planks
	(a) Sal Malayasian	Sqm.	1760	1568	1568	1568	1760	1568	1594	1594	1594	1594	1621
	(b) Sal Local	Sqm	1621	1503	1503	1503	1621	1503	1503	1503	1503	1503	1503	1503	1476	1476	1476
	(ii) 35mm thick planks
	(a) Sal Malayasian	Sqm	2434	2167	2167	2167	2434	2167	2204	2204	2204	2204	2240
	(b) Sal Local	Sqm	2240	2076	2076	2076	2240	2076	2076	2076	2076	2076	2076	2076	2039	2039	2039
	(iii) 50mm thick planks
	(a) Sal Malayasian	Sqm	3451	3068	3068	3068	3451	3068	3120	3120	3120	3120	3173
	b) Sal Local	Sqm	3173	2937	2937	2937	3173	2937	2937	2937	2937	237	2937	2937	2884	2884	2884
	(iv) Above 50mm thick planks
	(a) Sal Malayasian	Cum	67999	60356	60356	60356	67999	60356	61403	61403	61403	61403	62450
	(b) Sal Local	Cum	62454	57740	57740	57740	62454	57740	57740	57740	57740	57740	57740	57740	56693	56693	56693
	(For upper floors refer to item H(4) also)
9	Wooden eaves board as per design, fitted and fixed complete: In ground floor
	(i) Plain eaves board (Local Sal)
	(a) 19mm thick	Sqm	1552	1458	1458	1458	1552	1458	1458	1458	1458	1458	1458	1458	1437	1437	1437
	(b) 25mm thick	Sqm	1930	1807	1807	1807	1930	1807	1807	1807	1807	1807	1807	1807	1779	1779	1779
	(ii) Ornamental eaves board (Ordinary Teak)
	(a) 19mm thick	Sqm	2455	2349	2138	2138	2455	2349	2138	2138	2244	2244	2244	2244	2244	2244	2244
	(b) 25mm thick	Sqm	3056	2917	2640	2640	3056	2917	2640	2640	2779	2779	2779	2779	2779	2779	2779
	(iii) Ornamental eaves board (Badam/Gamar/Champ/Hallak)
	(a) 19mm thick	Sqm	1716	1621	1621	1621	1716	1621	1621	1621	1621	1621	1621	1674	1621	1621	1621
	(b) 25mm thick	Sqm	2072	1949	1949	1949	2072	1949	1949	1949	1949	1949	1949	2017	1949	1949	1949
	(For upper floors refer to item H(4) also)
10	Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor.
	(a) 19mm thick	Sqm	416	402	402	402	416	402	402	402	402	402	402	408	399	399	399
	(b) 25mm thick	Sqm	391	378	378	378	391	378	378	378	378	378	378	382	375	375	375
	(For upper floors refer to item H(4) also)
	Extra for providing hand hole (upto 150mm x 150mm size) including necessary timber frame [ size of batten 37.5 mmx25mm].
	(a) Sal Malayasian	Each	63	58	58	58	63	58	59	59	59	59	59
	(b) Sal Local	Each	59	57	57	57	59	57	57	57	57	57	57	57	56	56	56
12	Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens). In ground floor.
	(a) 50mm x 25mm x 2.7mm x 2.7mm.	Sqm	237	237	237	237	237	237	237	237	237	237	237	243	237	237	237
	(b) 75mm x 25mm x 2.7mm x 2.7mm.	Sqm	231	231	231	231	231	231	231	231	231	231	231	238	231	231	231
	(c) 75mm x 25mm x 4.5mm x 2.7mm.	Sqm	270	270	270	270	270	270	270	270	270	270	270	278	270	270	270
	(d) 75mm x 50mm x 4.5mm x 3.0mm.	Sqm	233	233	233	233	233	233	233	233	233	233	233	240	233	233	233
	(e) 75mm x 50mm x 2.7mm x 2.7mm	Sqm	230	230	230	230	230	230	230	230	230	230	230	237	230	230	230
	(f) 75mm x75mm x 4.5mm x 4.5mm.	Sqm	274	274	274	274	274	274	274	274	274	274	274	283	274	274	274
	(g) 75mm x 75mm x 2.7mm x 2.7mm.	Sqm	206	206	206	206	206	206	206	206	206	206	206	210	206	206	206
	(h) 100mm x 100mm x 2.7mm x 2.7mm.	Sqm	188	188	188	188	188	188	188	188	188	188	188	193	188	188	188
	(i) 25mm x 25mm x 2.7mm x 2.7mm.	Sqm	310	310	310	310	310	310	310	310	310	310	310	319	310	310	310
	(j) 25mm x 25mm x 2.2mm x 2.2mm.	Sqm	203	203	203	203	203	203	203	203	203	203	203	207	203	203	203
	(For upper floors refer to item H(4) also)
	D. ACCESSORIES
	Wooden sash bar 50mm. X 35mm. Upto 1200 mm length with coach screw and flat iron clamps (40mm. X 6mm.) fitted and fixed complete in any position.
	(a) 1st class best Indian Teak.	Each	354	323	312	312	354	312	309	309	309	309	309	324	309	309	309
	(b) Ordinary Teak Wood.	Each	273	262	238	238	273	262	238	238	250	250	250	250	250	250	250
	(c) Sal : Siliguri	Each	239	215	215	215	239	215	215	215	215	210	210	204	204	204	210
	(d) Sal : Malayasian	Each	206	190	190	190	206	190