CIVIL ITEMS



CHAPTER 14-MISC.CIVIL ITEMS

Item No.

Description

Unit

Rate

14.1

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as

directed, within a lead of 50 metres.

 

 

 

cum

 

 

 

330

14.2

Excavation for cable trenches of depth upto 1.2 m in soft soil

including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

 

 

cum

 

 

333

14.3

Filling available excavated earth (excluding rock) in trenches,

sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.

 

 

 

cum

 

 

 

212

14.4

Excavation   for  cable  trenches  in   soft  soil,  depth  upto  1.2  m

including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal

of surplus excavated soil as directed, within a lead of 50 metres.

 

 

 

 

cum

 

 

 

 

546

14.5

Deduct for not consolidation by ramming and watering while

 

 

 

14.6

re-filling with sand and or good soil in cable/ pipe laying.

Excavation of the cable trenches in hard rock not exceeding 1.5

cum

121

 

metres in width, and lift upto 1.5 metres, including getting out

 

 

 

the excavated soil and disposal of excavated soil as directed

 

 

 

14.7

within a lead of 50 metres.

Providing and laying in position cement concrete 1:2:4 (1

cum

1013

 

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

 

 

 

nominal size) in foundation of pump, DG set etc including form

 

 

 

14.8

work etc as required.

Providing and laying in position cement concrete 1:3:6 (1

cum

7549

 

cement : 2 coarse sand : 6 graded stone aggregate 20 mm

 

 

 

nominal size) in foundation of pump, DG set etc including form

 

 

 

14.9

work etc as required.

Providing and laying in position cement concrete 1:3:6 (1

cum

6839

 

cement : 2 coarse sand : 6 graded stone aggregate 40 mm

 

 

 

nominal size) in foundation of pump, DG set etc including form

 

 

 

14.10

work etc as required.

Providing and laying in position reinforced cement concrete

cum

6614

 

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

 

 

 

mm nominal size) in foundation of pump, DG set etc including

 

 

 

form work etc as required (excluding reinforcement).

cum

8029

14.11                 Providing brick work (in width 225 mm or more) with F.P.S.

 

bricks of class designation 7.5 in cement mortar 1:4 (1 cement :

4 coarse sand) at all levels.

cum

6362

 

14.12                 Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4

 

 

 

fine sand) at all levels.

sq m

306

 

14.13                 Providing, laying and fixing following dia G.I. pipe (medium

 

 

 

class) in ground complete with G.I. fittings including trenching

 

 

 

(75 cm deep)and re-filling etc as required

 

 

 

14.13.1             50 mm dia

metre

536

 

14.13.2             80 mm dia

metre

803

 

14.13.3             100 mm dia

metre

1113

 

14.13.4             150 mm dia

metre

1687

 

14.14                 Providing, laying and fixing following dia RCC pipe NP2 class

 

 

 

(light duty) in ground complete with RCC collars, jointing with

 

 

 

cement mortar 1:2 (1 cement : 2 fine sand) including trenching

 

 

 

(75 cm deep) and refilling etc as required.

 

 

 

14.14.1             100 mm dia

metre

525

 

14.14.2             150 mm dia

metre

598

 

14.14.3             250 mm dia

metre

701

 

14.14.4             300 mm dia

metre

854

 

14.15                Supplying and laying of following size DWC HDPE pipe ISI marked

 

 

 

along with all accessories like socket, bend, couplers etc.

 

 

 

conforming to IS 14930, Part II complete with fitting and cutting,

 

 

 

jointing etc. in the existing trench, complete as required.

 

 

 

14.15.1             63 mm dia (OD-63 mm & ID-51 mm nominal)

Metre

109

 

14.15.2             90 mm dia (OD-90 mm & ID-76 mm nominal)

Metre

149

 

14.15.3             120 mm dia (OD-120 mm & ID-103 mm nominal)

Metre

240

 

14.15.4             160 mm dia (OD-160 mm & ID-135 mm nominal)

Metre

358

 

14.15.5             200 mm dia (OD-200 mm & ID-175 mm nominal)

Metre

498

 

14.16                 Supplying and laying of following size DWC HDPE pipe ISI marked

 

 

 

along with all accessories like socket, bend, couplers etc.

 

 

 

conforming to IS 14930, Part II complete with fitting and cutting,

 

 

 

jointing etc.direct in ground (75 cm below ground level) including

 

 

 

excavation and refilling the trench but excluding sand cushioning

 

 

 

and protective covering etc., complete as required.

 

 

 

14.16.1             63 mm dia (OD-63 mm & ID-51 mm nominal)

Metre

209

 

14.16.2             90 mm dia (OD-90 mm & ID-76 mm nominal)

Metre

249

 

14.16.3             120 mm dia (OD-120 mm & ID-103 mm nominal)

Metre

341

 

14.16.4             160 mm dia (OD-160 mm & ID-135 mm nominal)

Metre

458

 

14.16.5             200 mm dia (OD-200 mm & ID-175 mm nominal)

Metre

598

 

ADDITIONAL CIVIL ITEMS INTRODUCED

Note:-              There are few items which are contained in Civil DSR which are required to be used in exclusive electrical works. Field units should use these items for such purposes.

i)
  1. ii)PROVIDING AND FIXING M.S. FAN CLAMP OF 16 mm dia M.S. BAR, BENT TO SHAPE WITH HOOKED ENDS IN R.C.C. SLABS OR BEAMS DURING LAYING, INCLUDING PAINTING THE EXPOSED PORTION OF LOOP, ALL AS PER STANDARD DESIGN COMPLETE. (DSR Civil-2014 item no. 10.17)

Rate to be taken from Civil DSR

 
ii)
  1. PROVIDING AND FIXING CIRCULAR/ HEXAGONAL G.I. BOX FOR CEILING FAN CLAMP, OF INTERNAL DIA 140 MM, 73 MM HEIGHT, TOP LID OF 1.5 MM THICK G.I. SHEET WITH ITS TOP SURFACE HACKED FOR PROPER BONDING, TOP LID SHALL BE SCREWED INTO THE G.I. BOX BY MEANS OF 3.3 MM DIA ROUND HEADED SCREWS, ONE LOCK AT THE CORNERS. CLAMP SHALL BE MADE OF 12 MM DIA M.S. BAR BENT TO SHAPE AS PER STANDARD DRAWING. (DSR Civil-2014 item no. 10.18)

Rate to be taken from Civil DSR

 
iii)
  1. MAKING HOLE FOR INSTALLATION OF EXUAST FAN OF SIZE UPTO 450MM SWEEP BY DEMOLISHING BRICK WORK MUNUALLY/BY MACHNICAL MEANS INCLUDING DISPOSAL OF MALBA WITHIN 50 METRES LEAD AND MAKING GOOD THE WALL BY PLASTERING ETC. AS REQUIRED. (DSR Civil-2014 item no. 15.7.4 and 13.1.2)

Rate to be taken from Civil DSR

 
iv)
  1. PAINTING WITH ONE OR MORE COAT OF SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND MANUFACTURER OF REQUIRED COLOUR TO GIVE AN EVEN SHADE. (DSR Civil-2014 item no. 14.54)

Rate to be taken from Civil DSR

 
v)
  1. PAINTING WITH ONE OR MORE COAT OF ALUMINIUM PAINT OF APPROVED BRAND AND MANUFACTURER TO GIVE AN EVEN SHADE. (DSR Civil-2014 item no. 14.55)

Rate to be taken from Civil DSR

 
vi)
  1. Painting with one or more coat of black anticorrosive bituminous paint of approved brand & manufacturer to give an even shade (DSR civil 2014- Item no. 14.56)

Rate to be taken from Civil DSR

 
vii)
  1. Re-lettering with black Japan paint of approved brand and manufacture. (DSR Civil-2014 item no. 14.60)

Rate to be taken from Civil DSR

 

****