INDEX FOR CIVIL ITEMS OF TELANGANA BUILDINGS SoR: 2019-20
Sl. No |
SECTION |
ITEM CODE |
DESCRIPTION OF THE ITEM |
FROM |
TO |
A |
SECTION |
|
BRICKS & BUILDING BLOCKS |
|
|
|
|
|
(Ex-quarry price - including loading excluding material GST, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
TBSC-A.I-01 - 02 |
ORDINARY CLAY BRICKS |
|
|
II |
SUB-SECTION |
TBSC-A.II-01 -14 |
FLY-ASH CEMENT/LIME SOLID BLOCKS |
|
|
III |
SUB-SECTION |
TBSC-A.III-01 - 04 |
AUTOCLAVED CONCRETE BLOCKS |
|
|
B |
SECTION |
|
NATURAL FLOORING STONES |
|
|
|
|
|
(Ex-quarry price - including loading excluding material GST, cost ofconveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
TBSC-B.I-01-09 |
LOCALLY AVAILABLE FLOORING STONES |
|
|
II |
SUB-SECTION |
TBSC-B.II-01-04 |
NATURAL FLOORING STONES - MARBLE |
|
|
III |
SUB-SECTION |
TBSC-B.III-01-04 |
NATURAL FLOORING STONES - GRANITE |
|
|
C |
SECTION |
|
WALL & FLOOR TILES |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-C.I-01 -04 |
NON-PORCELAIN CERAMIC FLOOR TILES |
|
|
II |
SUB-SECTION |
TBSC-C.II-01-16 |
PORCELAIN VITRIFIED FLOOR TILES |
|
|
III |
SUB-SECTION |
TBSC-C.III-01-03 |
CERAMIC WALL TILES |
|
|
IV |
SUB-SECTION |
TBSC-C.IV-01-14 |
PORCELAIN WALL TILES |
|
|
V |
SUB-SECTION |
TBSC-C.V-01-04 |
GLASS MOSAIC TILES |
|
|
VI |
SUB-SECTION |
TBSC-C.VI-01-04 |
WALL CLADDING TILES |
|
|
VII |
SUB-SECTION |
TBSC-C.VII-01-03 |
TERRAZZO FLOOR TILES (PLAIN & CHEQURED) |
|
|
VIII |
SUB-SECTION |
TBSC-C.VIII-01-08 |
CEMENT CONRETE FLOOR TILES (PLAIN & CHEQUERED) |
|
|
IX |
SUB-SECTION |
TBSC-C.IX-01-06 |
PRE-CAST CONCRETE BLOCKS FOR PAVING |
|
|
X |
SUB-SECTION |
TBSC-C.X-01-03 |
VINYL FLOORING |
|
|
D |
SECTION |
|
TIMBER & ROOFING MATERIALS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
|
|
|
Note:BeforeproposingtheTeakWoodItem s, the estimating authorities shall obtain prior approvalfromthecompetentauthority |
|
|
I |
SUB-SECTION |
TBSC-D.I-01-04 |
MEDIUM TEAK WOOD |
|
|
II |
SUB-SECTION |
TBSC-D.II-01-04 |
BEST TEAK WOOD |
|
|
III |
SUB-SECTION |
TBSC-D.III-01-04 |
BURMA TEAK WOOD |
|
|
IV |
SUB-SECTION |
TBSC-D.IV-01-02 |
ASSAM TEAK WOOD |
|
|
V |
SUB-SECTION |
TBSC-D.V-01-02 |
SAL/ COUNTRY WOOD |
|
|
VI |
SUB-SECTION |
TBSC-D.VI-01-19 |
ROOFING MATERIAL |
|
|
E |
SECTION |
|
STEEL MATERIALS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-E.I-01-15 |
MILD STEEL MATERIALS |
|
|
II |
SUB-SECTION |
TBSC-E.II-01-11 |
GALVANIZED STEEL MATERIALS |
|
|
III |
SUB-SECTION |
TBSC-E.III-01-02 |
STAINLESS STEEL MATERIALS |
|
|
F |
SECTION |
|
GLASS MATERIALS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-F.I-01-06 |
PLAIN GLASS PANES |
|
|
II |
SUB-SECTION |
TBSC-F.II-01-02 |
PIN HEADED GLASS PANES |
|
|
III |
SUB-SECTION |
TBSC-F.III-01-06 |
TINTED GLASS PANES |
|
|
IV |
SUB-SECTION |
TBSC-F.IV-01-02 |
FROSTED/ GROUND GLASS PANES |
|
|
V |
SUB-SECTION |
TBSC-F.V-01-05 |
TOUGHENED GLASS PANES |
|
|
G |
SECTION |
|
PAINTS & POLISHES |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-G.I-01-19 |
PRIMERS, FILLERS & BASES |
|
|
II |
SUB-SECTION |
TBSC-G.II-01-04 |
DISTEMPER PAINTS |
|
|
III |
SUB-SECTION |
TBSC-G.III-01-03 |
EMULSION BASED PAINTS |
|
|
IV |
SUB-SECTION |
TBSC-G.IV-01-02 |
SOLVENT BASED PAINTS |
|
|
V |
SUB-SECTION |
TBSC-G.V-01-02 |
OIL BASED ENAMEL PAINTS |
|
|
VI |
SUB-SECTION |
TBSC-G.VI-01-02 |
TEXTURE PAINTS |
|
|
VII |
SUB-SECTION |
TBSC-G.VII-01-04 |
SPECIAL PAINTS |
|
|
H |
SECTION |
|
PARTICLE BOARDS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-H.I-01-10 |
MELAMINE FACED PLAIN PARTICLE BOARD |
|
|
II |
SUB-SECTION |
TBSC-H.II-01-06 |
INSULATING PARTICLE BOARDS |
|
|
III |
SUB-SECTION |
TBSC-H.III-01-52 |
MEDIUM DENSITY FIBRE BOARDS |
|
|
IV |
SUB-SECTION |
TBSC-H.IV-01-25 |
CEMENT BONDED PARTICLE BOARDS |
|
|
J |
SECTION |
|
PLYWOODS, LAMINATES & VENEERS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-J.I-01-07 |
MOISTURE RESISTANT (MR) GRADE |
|
|
II |
SUB-SECTION |
TBSC-J.II-01-07 |
BOILING WATER RESISTANT (BWR) GRADE |
|
|
III |
SUB-SECTION |
TBSC-J.III-01-06 |
VENEERED DECORATIVE PLYWOOD |
|
|
IV |
SUB-SECTION |
TBSC-J.IV-01-06 |
LAMINATES |
|
|
V |
SUB-SECTION |
TBSC-J.V-01-02 |
COMMERCIAL VENEERS |
|
|
K |
SECTION |
|
CEILINGS, WALL PARTITIONS & WALL LININGS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-K.I-01-30 |
FALSE CEILINGs - TILES/ SHEETS |
|
|
II |
SUB-SECTION |
TBSC-K.II-01-24 |
FALSE CEILINGs - SECTIONS & ACCESSORIES |
|
|
III |
SUB-SECTION |
TBSC-K.III-01-12 |
WALL LINING & PANELLING |
|
|
IV |
SUB-SECTION |
TBSC-K.IV-01-18 |
PARTITIONS |
|
|
L |
SECTION |
|
DOORS, SHUTTERS & FRAMES |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-L.I-01-20 |
DOOR FRAMES |
|
|
II |
SUB-SECTION |
TBSC-L.II-01-26 |
DOOR SHUTTERS WITHOUT FRAMES |
|
|
III |
SUB-SECTION |
TBSC-L.III-01-29 |
DOORS WITH SHUTTERS & FRAMES |
|
|
IV |
SUB-SECTION |
TBSC-L.IV-01-04 |
CUP-BOARD DOORS |
|
|
M |
SECTION |
|
WINDOWS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-M.I-01-29 |
OPENABLE WINDOWS |
|
|
II |
SUB-SECTION |
TBSC-M.II-01-15 |
SLIDING WINDOWS |
|
|
III |
SUB-SECTION |
TBSC-M.III-01-08 |
VENTILLATORS |
|
|
N |
SECTION |
|
STRUCTURAL GLAZING & CURTAIN WALLING |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-N.I-01-05 |
FIXED GLAZING |
|
|
II |
SUB-SECTION |
TBSC-N.II-01-02 |
STRUCTURAL GLAING |
|
|
III |
SUB-SECTION |
TBSC-N.III-01-01 |
CURTAIN WALLING |
|
|
P |
SECTION |
|
FIXTURES FOR DOORS & WINDOWS |
|
|
|
|
|
(Landing cost - including loading, cost of conveyance, unloading & stacking but excluding material GST,) |
|
|
I |
SUB-SECTION |
TBSC-P.I-01-24 |
TOWER BOLTS |
|
|
II |
SUB-SECTION |
TBSC-P.II-01-22 |
HINGES |
|
|
III |
SUB-SECTION |
TBSC-P.III-01-18 |
DOOR HANDLES |
|
|
IV |
SUB-SECTION |
TBSC-P.IV-01-12 |
ALDROPS |
|
|
V |
SUB-SECTION |
TBSC-P.V-01-08 |
LATCHES |
|
|
VI |
SUB-SECTION |
TBSC-P.VI-01-04 |
DOOR CLOSURES |
|
|
VII |
SUB-SECTION |
TBSC-P.VII-01-05 |
FLOOR SPRINGS |
|
|
VIII |
SUB-SECTION |
TBSC-P.VIII-01-02 |
MORTICE LOCKS |
|
|
IX |
SUB-SECTION |
TBSC-P.IX-01-09 |
OTHER ACCESSORIES |
|
|
Q |
SECTION |
|
CONSTRUCTION CHEMICALS & ADMIXTURES |
|
|
|
|
|
Literature for usage / application of construction / water proofing materials, epoxies etc, may be obtained from manufacturers. |
|
|
I |
SUB-SECTION |
TBSC-Q.I-01-07 |
PLASTICIZERS |
|
|
II |
SUB-SECTION |
TBSC-Q.II-01-11 |
WATER PROOFING COMPOUNDS |
|
|
III |
SUB-SECTION |
TBSC-Q.III-01-06 |
BONDING AGENTS |
|
|
IV |
SUB-SECTION |
TBSC-Q.IV-01-04 |
ANTI-CORROSIVE AGENTS |
|
|
V |
SUB-SECTION |
TBSC-Q.V-01-05 |
GROUTS |
|
|
VI |
SUB-SECTION |
TBSC-Q.VI-01-22 |
MISCELLANEOUS CHEMICALS |
|
|
VII |
SUB-SECTION |
TBSC-Q.VII-01-12 |
REPAIRING & TREATMENT WORKS |
|
|
VIII |
SUB-SECTION |
TBSC-Q.VIII-01-11 |
EXPANSION JOINTS |
|
|
R |
SECTION |
TBSC-R.I-01-51 |
MISCELLANEOUS ITEMS |
|
|
S |
SECTION |
TBSC-S.I-01-14 |
MACHINERY & OTHER HIRE CHARGES |
|
|
T |
SECTION |
TBSC-T.I-01-55 |
LABOUR CHARGES |
|
|
U |
SECTION |
TBSC-U.I-01-15 |
DISMANTLING |
|
|
V |
SECTION |
TBSC-V.I-01-02 |
GYPSUM PLASTER |
|
|
A |
SECTION |
BRICKS & BUILDING BLOCKS |
|||
|
|
(Excluding taxes, unloading&stacking) |
cost |
of |
conveyance, |
I |
SUB-SECTION |
ORDINARY CLAY BRICKS |
|||
1 |
TBSC-A.I-01 |
Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cm |
|||
2 |
TBSC-A.I-02 |
Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Modular or traditional size 19 x 9 x 9 cm |
|||
II |
SUB-SECTION |
FLY-ASHCEMENT/LIMESOLIDBLOCKS |
|||
3 |
TBSC-A.II-01 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 290 x 225 x 140 mm |
|||
4 |
TBSC-A.II-02 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 290 x 200 x 140 mm |
|||
5 |
TBSC-A.II-03 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 290 x 150 x 140 mm |
|||
6 |
TBSC-A.II-04 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 290 x 112/100 x 140 mm |
|||
7 |
TBSC-A.II-05 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 225 x 100 x 60 mm |
|||
8 |
TBSC-A.II-06 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 145 x 225 x 140 mm |
|||
9 |
TBSC-A.II-07 |
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894- 1990 - CLASS - 7.5 145 x 200 x 140 mm |
|||
10 |
TBSC-A.II-08 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 290 x 225 x 140 mm |
|||
11 |
TBSC-A.II-09 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 290 x 200 x 140 mm |
|||
12 |
TBSC-A.II-10 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 290 x 150 x 140 mm |
|||
13 |
TBSC-A.II-11 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 290 x 112/100 x 140 mm |
|||
14 |
TBSC-A.II-12 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 225 x 100 x 60 mm |
|||
15 |
TBSC-A.II-13 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 145 x 225 x 140 mm |
|||
16 |
TBSC-A.II-14 |
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894- 1990 - CLASS - 5 145 x 200 x 140 mm |
|||
III |
SUB-SECTION |
AUTOCLAVED CONCRETE BLOCKS |
|||
17 |
TBSC-A.III-01 |
Supply of Aerated (Cellular) AutoclavedConcrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 100mm |
|||
18 |
TBSC-A.III-02 |
Supply of Aerated (Cellular) AutoclavedConcrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 150mm |
|||
19 |
TBSC-A.III-03 |
Supply of Aerated (Cellular) AutoclavedConcrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 200mm |
|||
20 |
TBSC-A.III-04 |
Supply of Aerated (Cellular) AutoclavedConcrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 230mm |
|||
B |
SECTION |
NATURAL FLOORING STONES |
|||
|
|
(Excluding taxes, unloading&stacking) |
cost |
of |
conveyance, |
I |
SUB-SECTION |
LOCALLY AVAILABLE FLOORING STONES |
|||
21 |
TBSC-B.I-01 |
Shahabad /Tandur Rough Stone slabs of all sizes up to 25 mm in thickness |
|||
22 |
TBSC-B.I-02 |
Shahabad / Tandur Rough Stone slabs of all sizes between 25 mm - 40 mm thickness |
|||
23 |
TBSC-B.I-03 |
Polished Shahabad/ Tandur stone slabs of all sizes between 15 - 18 mm thickness |
|||
24 |
TBSC-B.I-04 |
Kadapa slabs of 40 mm thick of all sizes |
|||
25 |
TBSC-B.I-05 |
Kadapa slabs of 50 mm thick of all sizes |
|||
26 |
TBSC-B.I-06 |
Polished black Kadapa slabs of all sizes between 15 - 18 mm thickness |
|||
27 |
TBSC-B.I-07 |
Polished black Kadapa slabs of all sizes between 25 - 30 mm thickness |
|||
28 |
TBSC-B.I-08 |
Polished White Bethamcherla (marble type) stone of all sizes and between 22-25 mm thickness |
|||
29 |
TBSC-B.I-09 |
Polished ColouredBethamcherla (marble type) stone of all sizes and between 22-25 mm thickness |
|||
II |
SUB-SECTION |
NATURAL FLOORING STONES - MARBLE |
30 |
TBSC-B.II-01 |
Polished Marble slabs of Dongari/ Adanga/ Marodh/ Rajgangpur etc., variety of thickness between 16 mm to 20 mm of sizes from 600 mm to 900 mm |
1 Sqm |
661.00 |
31 |
TBSC-B.II-02 |
Polished Marble slabs of Dongari/ Adanga/ Marodh/ Rajgangpur etc., variety of thickness between 16 mm to 20 mm of sizes up to 600 mm |
1 Sqm |
534.00 |
32 |
TBSC-B.II-03 |
Polished Marble slabs of any variety and gang saw cut (Such as Dongari/ Adanga/ Marodh/ Rajgangpuretc) 16 mm to 20 mm(average) thick ( 0.610 M width of anylength) |
1 Sqm |
907.00 |
33 |
TBSC-B.II-04 |
Polished Marble Tiles of 8 - 10 mm thickness of all sizes and varieties |
1 Sqm |
432.00 |
III |
SUB-SECTION |
NATURAL FLOORING STONES - GRANITE |
|
|
34 |
TBSC-B.III-01 |
High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ premium colours |
1 Sqm |
3,118.00 |
35 |
TBSC-B.III-02 |
High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours |
1 Sqm |
2,709.00 |
36 |
TBSC-B.III-03 |
High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black |
1 Sqm |
2,303.00 |
37 |
TBSC-B.III-04 |
Granite stone tiles 8 mm thick (mirror polished of all shades) |
1 Sqm |
1,057.00 |
C |
SECTION |
WALL & FLOOR TILES |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
NON-PORCELAIN CERAMIC FLOOR TILES |
|
|
38 |
TBSC-C.I-01 |
Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
300 |
39 |
TBSC-C.I-02 |
Supply of Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
310 |
40 |
TBSC-C.I-03 |
Supply of Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
485 |
41 |
TBSC-C.I-04 |
Supply of Non-skid red or white full body Ceramic floor tiles of scratch free-stain free and scratch free-Nano finish of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
485 |
II |
SUB-SECTION |
PORCELAIN VITRIFIED FLOOR TILES |
|
|
42 |
TBSC-C.II-01 |
Supply of ordinary soluble salt porcelainvitrified tiles screen printed and polished of size 400x 400 mm and thickness between 8-9 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
43 |
TBSC-C.II-02 |
Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
421 |
44 |
TBSC-C.II-03 |
Supply of Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns |
1 Sqm |
421 |
45 |
TBSC-C.II-04 |
Supply of Nano polished soluble salt porcelain vitrified tiles screen printed of size 800 x 800 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
500 |
46 |
TBSC-C.II-05 |
Supply of Double charged / multi charged stain free full body porcelain vitrified tiles withdouble layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns |
1 Sqm |
550 |
47 |
TBSC-C.II-06 |
Supply of Double charged / multi charged stain free full body porcelain vitrified tiles withdouble layer pigment of size 800 x 800 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns |
1 Sqm |
600 |
48 |
TBSC-C.II-07 |
Supply of Double charged / multi charged stain free full body porcelain vitrified tiles withdouble layer pigment of size 1000 x 1000 mm and thickness between 12-15 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns |
1 Sqm |
700 |
49 |
TBSC-C.II-08 |
Supply of digital / polished glazed full body porcelain vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 800 x 800 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
650 |
50 |
TBSC-C.II-09 |
Supply of digital / polished glazed full body porcelain vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 900 x 900 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
800 |
51 |
TBSC-C.II-10 |
Supply of digital / polished glazed full body porcelain vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 1000 x 1000 mm and thickness between 12- 15 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
1000 |
52 |
TBSC-C.II-11 |
Supply of digital / polished glazed full body porcelain vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 1200 x 600 mm and thickness between 12- 15 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
750 |
53 |
TBSC-C.II-12 |
Supply of full body heavy duty industrial variety porcelain vitrified tile of size 300 x 300 / 200 x 100 mm and thickness between 10-12 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
54 |
TBSC-C.II-13 |
Supply of full body heavy duty industrial variety / tact porcelain vitrified tile of size 300 x 300 / 200 x 100 mm and thickness between 12-15 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
|
55 |
TBSC-C.II-14 |
Supply of full body heavy duty industrial variety porcelain vitrified tile of size 300 x 300 / 200 x 100 mm and thickness between 18-20 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
|
56 |
TBSC-C.II-15 |
Supply of full body heavy duty industrial variety porcelain vitrified tile of size 400 x 400 mm and thickness between 10 -12 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
|
57 |
TBSC-C.II-16 |
Supply of full body heavy duty industrial variety porcelain vitrified tile of size 600 x 600 mm and thickness between 10 - 12 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
|
III |
SUB-SECTION |
CERAMIC WALL TILES |
|
|
58 |
TBSC-C.III-01 |
Supply of glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15)of any colour and finish in all shades and designs |
1 Sqm |
300 |
59 |
TBSC-C.III-02 |
Supply of glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15)of any colour and finish in all shades and designs |
1 Sqm |
400 |
60 |
TBSC-C.III-03 |
Supply of glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
550 |
IV |
SUB-SECTION |
PORCELAIN WALL TILES |
|
|
61 |
TBSC-C.IV-01 |
Supply of glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
550 |
62 |
TBSC-C.IV-02 |
Supply of digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
500 |
63 |
TBSC-C.IV-03 |
Supply of digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
500 |
64 |
TBSC-C.IV-04 |
Supply of screen printed glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
550 |
65 |
TBSC-C.IV-05 |
Supply of glazed full body porcelain wall tiles of size 400 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
650 |
66 |
TBSC-C.IV-06 |
Supply of glazed full body porcelain wall tiles of size 600 x 800 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 7-9 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
67 |
TBSC-C.IV-07 |
Supply of glazed full body porcelain premium plain design highlighter combination floor and wall tiles set with floor tiles of thickness 14-16 mm and wall tiles of thickness 8-10 mm but excluding highlighters 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
68 |
TBSC-C.IV-08 |
Supply of glazed full body porcelain premium plain design highlighter combination floor and wall tiles set with floor tiles of thickness 14-16 mm and wall tiles of thickness 8-10 mm but including highlighters 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
69 |
TBSC-C.IV-09 |
Providing and fixing wall dado with epoxy emulsion grout/ synthetic/ resin based adhesive in specified thick and pointing with specified colour epoxy grout excluding cost of tiles |
1 Sqm |
302.00 |
70 |
TBSC-C.IV-10 |
Providing and fixing wall dado with cement based adhesive in specified thick and pointing with specified colour epoxy grout excluding cost of tiles |
1 Sqm |
153.00 |
71 |
TBSC-C.IV-11 |
Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles. |
1 Sqm |
319.00 |
72 |
TBSC-C.IV-12 |
Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with cement based adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles . |
1 Sqm |
161.00 |
73 |
TBSC-C.IV-13 |
Providing and fixing flooring with full depth jointing and pointing to the Marble/ Granite flooring for any sizes with epoxy emulsion grout/ synthetic / resin based adhesive in width of 3-5 mm excluding costoftiles. |
1 Sqm |
636.00 |
74 |
TBSC-C.IV-14 |
Providing and fixing flooring with full depth jointing and pointing to the Marble/ Granite flooring for any sizes with cement based adhesive in width of 3-5 mm excluding cost of tiles. |
1 Sqm |
322.00 |
V |
SUB-SECTION |
GLASS MOSAIC TILES |
|
|
75 |
TBSC-C.V-01 |
Supply of glazed full body glass mosaic tiles of 20 x 20 x 4 mm thick in specified pattern 1st Quality of any colour and design |
1 Sqm |
Deleted |
76 |
TBSC-C.V-02 |
Providing Glass Mosaic tiles using specified pattern fixing in specified thick epoxy emulsion grout of epoxy resins and filler powder of approved colour grout including all taxes excluding cost of tiles |
1 Sqm |
|
77 |
TBSC-C.V-03 |
Providing Glass Mosaic tiles using specified pattern fixing in specified thick cementitious powder mix cement grout and approved colour grout including all taxes excluding cost of tiles |
1 Sqm |
|
VI |
SUB-SECTION |
WALL CLADDING TILES |
|
|
78 |
TBSC-C.VI-01 |
Supply of glazed full body porcelain tiles for external cladding purposes of any size and thickness between 6-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
550 |
79 |
TBSC-C.VI-02 |
Supply of glazed red or white full body ceramic tiles for external cladding purposes of any size and thickness between 5-7 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
480 |
80 |
TBSC-C.VI-03 |
Supply of glazed red or white full body ceramic tiles for external cladding purposes of any size and thickness between 10-12 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
520 |
81 |
TBSC-C.VI-04 |
Supply of glazed red or white full body ceramic tiles for external cladding purposes of any size and thickness between 18-20 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs |
1 Sqm |
Deleted |
VII |
SUB-SECTION |
TERRAZZO FLOOR TILES (PLAIN & CHEQURED) |
|
|
82 |
TBSC-C.VII-01 |
Supplying precast terrazzo tiles conforming to IS: 13801 using marble aggregates of size 10mm , sand, marble powder, white cement pigments etc., with terrazzo topping not less than 6 mm of tiles overall size not less than 20 mm thick white shades. |
1 Sqm |
261.00 |
83 |
TBSC-C.VII-02 |
Supplyingprecastterrazzoplaintilesconforming to IS: 13801 using marble aggregates of size 10 mm , sand, marble powder, white cement pigmentsetc.,withterrazzotoppingnotlessthan 6 mm of tiles overall size not less than 20 mm thick anycolouredshades. |
1 Sqm |
278.00 |
84 |
TBSC-C.VII-03 |
Supplying precast terrazzo chequered tiles conforming to IS: 13801 using marbleaggregates of size 10 mm , sand, marble powder, white cement pigments etc., with terrazzo topping not less than 6 mm of tiles overall size not less than 20mmthickofanycolouredshades. |
1 Sqm |
285.00 |
VIII |
SUB-SECTION |
CEMENT CONRETE FLOOR TILES (PLAIN & CHEQUERED) |
|
|
85 |
TBSC-C.VIII-01 |
Supplying plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades. |
1 Sqm |
245.00 |
86 |
TBSC-C.VIII-02 |
Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades. |
1 Sqm |
258.00 |
87 |
TBSC-C.VIII-03 |
Supplying plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 25 mm of any shades. |
1 Sqm |
261.00 |
88 |
TBSC-C.VIII-04 |
Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 25 mm of any shades. |
1 Sqm |
274.00 |
89 |
TBSC-C.VIII-05 |
Supplying plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 mm and thickness 25 mm of any shades. |
1 Sqm |
285.00 |
90 |
TBSC-C.VIII-06 |
Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 mm and thickness 25 mm of any shades. |
1 Sqm |
300.00 |
91 |
TBSC-C.VIII-07 |
Supply of high strength Cement Concrete plain Step tiles with edge half rounded and grooved conforming to IS: 13801 using aggregates, cement,pigmentsofregularcolour,designandof 25 mmthickness |
1 Sqm |
427.00 |
92 |
TBSC-C.VIII-08 |
Supply of high strength Cement Concrete terrazzo/pre-polished/ chequered Step tiles with edge rounded and grooved conforming to IS: 13801 using aggregates, cement, pigments of any premium colour, design and of 25 mm thickness |
1 Sqm |
449.00 |
IX |
SUB-SECTION |
PRE-CAST CONCRETE BLOCKS FOR PAVING |
|
|
93 |
TBSC-C.IX-01 |
Supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50 mm for Non-traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification |
1 Sqm |
304.00 |
94 |
TBSC-C.IX-02 |
Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification |
1 Sqm |
328.00 |
95 |
TBSC-C.IX-03 |
Supply of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification |
1 Sqm |
470.00 |
96 |
TBSC-C.IX-04 |
Supply of precast concrete blocks for paving of M-50 grade and thickness not less than 100 mm for Heavy traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification |
1 Sqm |
518.00 |
97 |
TBSC-C.IX-05 |
Supply of precast concrete blocks for paving of M-55 grade and thickness not less than 120 mm for very heavy traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification |
1 Sqm |
589.00 |
98 |
TBSC-C.IX-06 |
Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water,electricityetc |
1 Sqm |
190.00 ( Labour Charges increased @5%) |
X |
SUB-SECTION |
VINYL FLOORING |
|
|
99 |
TBSC-C.X-01 |
Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards |
1 Sqm |
771.00 |
100 |
TBSC-C.X-02 |
Vinyl Composition Floor Tiles of size 305 mm x 305 mm having an overall thickness of 2.0mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards |
1 Sqm |
528.00 |
101 |
TBSC-C.X-03 |
Vinyl Flooring Sheets or tiles having a nominal total thickness of 1.5 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards |
1 Sqm |
383.00 |
D |
SECTION |
TIMBER & ROOFING MATERIALS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
|
|
Note:BeforeproposingtheTeakWoodItem s, the estimating authorities shall obtain prior |
|
|
I |
SUB-SECTION |
MEDIUM TEAK WOOD |
|
|
102 |
TBSC-D.I-01 |
Medium Teak Wood scantlings: up to 2.0 M |
1 cum |
72,620.00 |
103 |
TBSC-D.I-02 |
Medium Teak Wood scantlings: 2.0 to 3.0 M |
1 cum |
80,689.00 |
104 |
TBSC-D.I-03 |
Medium Teak Wood scantlings: above 3.0 M |
1 cum |
88,759.00 |
105 |
TBSC-D.I-04 |
Medium Teak Wood Planks: any thickness |
1 cum |
1,45,240.0 |
II |
SUB-SECTION |
BEST TEAK WOOD |
|
|
106 |
TBSC-D.II-01 |
Best Teak Wood scantlings: up to 2.0 M |
1 cum |
1,25,068.0 |
107 |
TBSC-D.II-02 |
Best Teak Wood scantlings: 2.0 to 3.0 M |
1 cum |
1,33,137.0 |
108 |
TBSC-D.II-03 |
Best Teak Wood scantlings: above 3.0 M |
1 cum |
1,41,206.0 |
109 |
TBSC-D.II-04 |
Best Teak Wood Planks: any thickness |
1 cum |
1,57,344.0 |
III |
SUB-SECTION |
BURMA TEAK WOOD |
|
|
110 |
TBSC-D.III-01 |
Burma Teak Wood scantlings: up to 2.0 M |
1 cum |
1,71,857.0 |
111 |
TBSC-D.III-02 |
Burma Teak Wood scantlings: 2.0 to 3.0 M |
1 cum |
1,76,765.0 |
112 |
TBSC-D.III-03 |
Burma Teak Wood scantlings: above 3.0 M |
1 cum |
1,85,920.0 |
113 |
TBSC-D.III-04 |
Burma Teak Wood Planks: any thickness |
1 cum |
2,01,319.0 |
IV |
SUB-SECTION |
ASSAM TEAK WOOD |
|
|
114 |
TBSC-D.IV-01 |
Assam Teak Wood scantlings: any length |
1 cum |
46,071.00 |
115 |
TBSC-D.IV-02 |
Assam Teak Wood Planks: any thickness |
1 cum |
66,803.00 |
V |
SUB-SECTION |
SAL/COUNTRYWOOD |
|
|
116 |
TBSC-D.V-01 |
Sal Wood scantlings: any length |
1 cum |
44,785.00 |
117 |
TBSC-D.V-02 |
Sal Wood Planks: any thickness |
1 cum |
59,715.00 |
VI |
SUB-SECTION |
ROOFING MATERIAL |
|
|
118 |
TBSC-D.VI-01 |
A.C sheet Corrugated 6 mm thick |
1 Sqm |
220.00 |
119 |
TBSC-D.VI-02 |
A.C sheet plain 4 m thick |
1 Sqm |
158.00 |
120 |
TBSC-D.VI-03 |
A.C sheet plain 6 m thick |
1 Sqm |
164 |
121 |
TBSC-D.VI-04 |
Plain or Corrugated Galvanized iron sheets as perIS277(0.1mmto0.8mmthickness) |
1 kg |
60 |
122 |
TBSC-D.VI-05 |
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours |
1 Sqm |
387 |
123 |
TBSC-D.VI-06 |
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours |
1 Sqm |
377 |
124 |
TBSC-D.VI-07 |
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular RangeColours |
1 Sqm |
339 |
125 |
TBSC-D.VI-08 |
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular RangeColours |
1 Sqm |
319 |
126 |
TBSC-D.VI-09 |
Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters |
1 RM |
260 |
127 |
TBSC-D.VI-10 |
Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: Maximum 2½ Meters |
1 RM |
232 |
|
TBSC-D.VI-11 |
Supply of fibre reinforced corrugated sheets 6mm thick(Non asbestos) in compliance with Type-A Category –C class-7 of IS 14871 for roofing |
1 Sqm |
320.00 |
|
TBSC-D.VI-12 |
Supply of pre painted fibre reinforced corrugated sheets 6mm thick(Non asbestos) in compliance with Type-A Category –C class-7 ofIS 14871forroofing |
1 Sqm |
380.00 |
128 |
TBSC-D.VI-11 |
Supply of UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick |
1 Sqm |
1,276.00 |
129 |
TBSC-D.VI-12 |
Aluminium universal glazing set 40 mm wide for jointing and fixing polycarbonate sheets |
1 RM |
127.00 |
130 |
TBSC-D.VI-13 |
75 mm long screws - |
1 Each |
5 |
131 |
TBSC-D.VI-14 |
G.I scam bolts & nuts |
1 Each |
6 |
132 |
TBSC-D.VI-15 |
G.I bolts & nuts |
1 Each |
6 |
133 |
TBSC-D.VI-16 |
G.I ‘J’ bolts 8 mm Diameter |
1 Each |
10.00 |
134 |
TBSC-D.VI-17 |
G.I Washers |
1 Each |
2 |
135 |
TBSC-D.VI-18 |
Limpet washers (for scam & ‘J’ bolts) |
1 Each |
2.00 |
136 |
TBSC-D.VI-19 |
Bitumen washers |
1 Each |
2.00 |
E |
SECTION |
STEEL MATERIALS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
MILD STEEL MATERIALS |
|
|
137 |
TBSC-E.I-01 |
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finisheditemofworkasperspecialSpec:1108 |
1 Sqm |
3,909.00 |
138 |
TBSC-E.I-02 |
Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm Diameter steel pulleys, the top, bottom and side vertical frames of thecollapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat ofapproved steel primer etc., complete for finished itemofworkasperspecialSpec1105 |
1 Sqm |
3,420.00 |
139 |
TBSC-E.I-03 |
Expanded metal sheets as per IS-412-1962-Light Weight-25 mm(SWM)x75 mm (LWM)3.25 mm Wide and 1.25 mmthick |
1 Sqm |
160.00 |
140 |
TBSC-E.I-04 |
Expanded metal sheets as per IS-412-1962-Light Weight-20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.25 mmthick |
1 Sqm |
160.00 |
141 |
TBSC-E.I-05 |
Expanded metal sheets as per IS-412-1962-Light Weight-20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 1.25 mmthick |
1 Sqm |
160.00 |
142 |
TBSC-E.I-06 |
Expanded metal sheets as per IS-412-1962- Medium Weight-25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 1.60 mm thick |
1 Sqm |
218.00 |
143 |
TBSC-E.I-07 |
Expanded metal sheets as per IS-412-1962- Medium Weight-20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.60 mm thick |
1 Sqm |
218.00 |
144 |
TBSC-E.I-08 |
Expanded metal sheets as per IS-412-1962- Medium Weight-20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 1.60 mm thick |
1 Sqm |
218.00 |
145 |
TBSC-E.I-09 |
Expanded metal sheets as per IS-412-1962- Heavy Weight-25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 2.24 mm thick |
1 Sqm |
249.00 |
146 |
TBSC-E.I-10 |
Expanded metal sheets as per IS-412-1962- Heavy Weight-20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 2.24 mm thick |
1 Sqm |
249.00 |
147 |
TBSC-E.I-11 |
Expanded metal sheets as per IS-412-1962- Heavy Weight-20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 2.24 mm thick |
1 Sqm |
249.00 |
148 |
TBSC-E.I-12 |
Rabbit wire mesh (chicken mesh) of not less than 30 gauge |
1 Sqm |
19.00 |
149 |
TBSC-E.I-13 |
Country Nails |
1 Kg |
61.00 |
150 |
TBSC-E.I-14 |
Wire Nails |
1 Kg |
61.00 |
151 |
TBSC-E.I-15 |
Mild Steel Tubes & pipes of all Diameters as per IS-1161 |
1 Kg |
61.00 |
II |
SUB-SECTION |
GALVANIZED STEEL MATERIALS |
|
|
152 |
TBSC-E.II-01 |
Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type A - IOWA Type Designation as per standard specification |
1 Kg |
90.00 |
153 |
TBSC-E.II-02 |
Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type B - Glidden Type Designation as per standard specification |
1 Kg |
90.00 |
154 |
TBSC-E.II-03 |
Galvanized Iron fly proof wire mesh of not less than 20 gauge |
1 Sqm |
236.00 |
155 |
TBSC-E.II-04 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2"(50 mm x 50 mm) - 8Gauge |
1 Sqm |
519.00 |
156 |
TBSC-E.II-05 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2½"x2½"(63mmx63mm)-8Gauge |
1 Sqm |
411.00 |
157 |
TBSC-E.II-06 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 3"x3"(76 mm x 76 mm) - 8Gauge |
1 Sqm |
351.00 |
158 |
TBSC-E.II-07 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 4"x4" (102 mm x 102 mm) - 8 Gauge |
1 Sqm |
261.00 |
159 |
TBSC-E.II-08 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge |
1 Sqm |
626.00 |
160 |
TBSC-E.II-09 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 8 Gauge |
1 Sqm |
519.00 |
161 |
TBSC-E.II-10 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 3"x3" (76 mm x 76 mm) - 8 Gauge |
1 Sqm |
428.00 |
162 |
TBSC-E.II-11 |
Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 4"x4" (102 mm x 102 mm) - 8 Gauge |
1 Sqm |
334.00 |
III |
SUB-SECTION |
STAINLESS STEEL MATERIALS |
|
|
163 |
TBSC-E.III-01 |
Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade |
1 Kg |
387 |
164 |
TBSC-E.III-02 |
Stainless steel fly proof wire mesh of not less than 20 gauge |
1 Sqm |
522 |
F |
SECTION |
GLASS MATERIALS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
PLAIN GLASS PANES |
|
|
165 |
TBSC-F.I-01 |
Plain Float Glass 4 mm thick |
1 Sqm |
400.00 |
166 |
TBSC-F.I-02 |
Plain Float Glass 5 mm thick |
1 Sqm |
507.00 |
167 |
TBSC-F.I-03 |
Plain Float Glass 6 mm thick |
1 Sqm |
629.00 |
168 |
TBSC-F.I-04 |
Plain Float Glass 8 mm thick |
1 Sqm |
845.00 |
169 |
TBSC-F.I-05 |
Plain Float Glass 10 mm thick |
1 Sqm |
890.00 |
170 |
TBSC-F.I-06 |
Plain Float Glass 12 mm thick |
1 Sqm |
1,067.00 |
II |
SUB-SECTION |
PIN HEADED GLASS PANES |
|
|
171 |
TBSC-F.II-01 |
Pin headed Glass 4 mm thick |
1 Sqm |
300.00 |
172 |
TBSC-F.II-02 |
Pin headed Glass 5 mm thick |
1 Sqm |
390.00 |
III |
SUB-SECTION |
TINTED GLASS PANES |
|
|
173 |
TBSC-F.III-01 |
Tinted - Bronze/ Green Glass 4 mm thick |
1 Sqm |
467.00 |
174 |
TBSC-F.III-02 |
Tinted - Bronze/ Green Glass 5 mm thick |
1 Sqm |
584.00 |
175 |
TBSC-F.III-03 |
Tinted - Bronze/ Green Glass 6 mm thick |
1 Sqm |
700.00 |
176 |
TBSC-F.III-04 |
Tinted - Bronze/ Green Glass 8 mm thick |
1 Sqm |
1,002.00 |
177 |
TBSC-F.III-05 |
Tinted - Bronze/ Green Glass 10 mm thick |
1 Sqm |
1,168.00 |
178 |
TBSC-F.III-06 |
Tinted - Bronze/ Green Glass 12 mm thick |
1 Sqm |
1,402.00 |
IV |
SUB-SECTION |
FROSTED/ GROUND GLASS PANES |
|
|
179 |
TBSC-F.IV-01 |
Frosted / Ground Glass 4 mm thick |
1 Sqm |
539.00 |
180 |
TBSC-F.IV-02 |
Frosted / Ground Glass 5 mm thick |
1 Sqm |
678.00 |
V |
SUB-SECTION |
TOUGHENED GLASS PANES |
|
|
181 |
TBSC-F.V-01 |
Toughened Plain Glass 5 mm (including Glass) |
1 Sqm |
812.00 |
182 |
TBSC-F.V-02 |
Toughened Plain Glass 6 mm (including Glass) |
1 Sqm |
938.00 |
183 |
TBSC-F.V-03 |
Toughened Plain Glass 8 mm (including Glass) |
1 Sqm |
1,251.00 |
184 |
TBSC-F.V-04 |
Toughened Plain Glass 10 mm (including Glass) |
1 Sqm |
1,500.00 |
185 |
TBSC-F.V-05 |
Toughened Plain Glass 12 mm (including Glass) |
1 Sqm |
1,749.00 |
G |
SECTION |
PAINTS & POLISHES |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
PRIMERS, FILLERS & BASES |
|
|
186 |
TBSC-G.I-01 |
Supply of water based Cement Primer of Interior Grade- 1 |
1 Kg |
150.00 |
187 |
TBSC-G.I-02 |
Supply of water based Cement Primer of Exterior Grade- 2 |
1 Kg |
191.00 |
188 |
TBSC-G.I-03 |
Supply of wallputty of White Cement or Polymer orCementbased |
1 Kg |
35.00 |
189 |
TBSC-G.I-04 |
Acrylic spray plaster in paste form made with specially selected inert mineral fillers, antifungal agents to protect the material the acrylic binding medium used gives good surface adhesion any grade |
1 Kg |
28.00 |
190 |
TBSC-G.I-05 |
Supply of Red Oxide Primer Paint for iron works of Grade -1 |
1 Lit |
129.00 |
191 |
TBSC-G.I-06 |
Supply of Zinc Chromate Yellow Oxide Primer paint for iron works |
1 Lit |
185.00 |
192 |
TBSC-G.I-07 |
Supply of Wood Primer |
1 Lit |
144.00 |
193 |
TBSC-G.I-08 |
Supply of Metal paste (Putty) for steel works |
1 Kg |
144.00 |
194 |
TBSC-G.I-09 |
Supply of Putty for wood work (Powder chalk) |
1 Kg |
144.00 |
195 |
TBSC-G.I-10 |
Supply of White Lead |
1 Kg |
103.00 |
196 |
TBSC-G.I-11 |
Supply of Synthetic clear Varnish |
1 Lit |
144.00 |
197 |
TBSC-G.I-12 |
Supply of Spirit |
1 Lit |
101.00 |
198 |
TBSC-G.I-13 |
Supply of Linseed Oil |
1 Lit |
58.00 |
199 |
TBSC-G.I-14 |
Supply of thinner for melamine polish/ French polish |
1 Lit |
133.00 |
200 |
TBSC-G.I-15 |
Supply of thinner for Poly-urethane polish |
1 Lit |
272.00 |
201 |
TBSC-G.I-16 |
Supply of French Polish |
1 Lit |
188.00 |
202 |
TBSC-G.I-17 |
Supply of ready made Wax Polish |
1 Kg |
572.00 |
203 |
TBSC-G.I-18 |
Supply of wood adhesive compound |
1 Kg |
224.00 |
204 |
TBSC-G.I-19 |
Supply of anti-corrosive grade - 1 bitumen paint of black colour |
1 Lit |
516.00 |
II |
SUB-SECTION |
LIME, DISTEMPERS & CEMENT PAINTS |
|
|
205 |
TBSC-G.II-01 |
Supply of paint grade lime for white / colour wash |
1 Kg |
22.00 |
206 |
TBSC-G.II-02 |
Supply of Dry Powder Distemper |
1 Kg |
43.00 |
207 |
TBSC-G.II-03 |
Supply of acrylic based Oil Bound washable Distemper |
1 Kg |
54.00 |
208 |
TBSC-G.II-04 |
Supply of Water proof Cement paint |
1 Kg |
51.00 |
III |
SUB-SECTION |
EMULSION BASED PAINTS |
|
|
209 |
TBSC-G.III-01 |
Supply of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. |
1 Lit |
195.00 |
210 |
TBSC-G.III-02 |
Supply of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound ) content less than 50grams/ Lit. |
1 Lit |
204.00 |
211 |
TBSC-G.III-03 |
Supply of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50grams/ Lit. |
1 Lit |
225.00 |
IV |
SUB-SECTION |
SOLVENT BASED PAINTS |
|
|
212 |
TBSC-G.IV-01 |
Supply of solvent based latex paint having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. |
1 Lit |
245.00 |
213 |
TBSC-G.IV-02 |
Supply of synthetic polymer luxury plastic emulsion / solvent based lustre paint of superior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. |
1 Lit |
430.00 |
V |
SUB-SECTION |
OIL BASED ENAMEL PAINTS |
|
|
214 |
TBSC-G.V-01 |
Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50grams/ Lit. |
1 Lit |
251.00 |
215 |
TBSC-G.V-02 |
Supply of ready mixed Synthetic Enamel paints in all shades Grade - II having VOC (Volatile Organic Compound ) content less than 50grams/ Lit. |
1 Lit |
191.00 |
VI |
SUB-SECTION |
TEXTURE PAINTS |
|
|
216 |
TBSC-G.VI-01 |
Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives. |
1 Kg |
37.00 |
217 |
TBSC-G.VI-02 |
Exterior grade Texture ready mixed plaster made with natural minerals - granite flakes/ marble flakes/ powder, sand and other carefully selected and sieved minerals inan acrylic bindingmedium |
1 Kg |
47.00 |
VII |
SUB-SECTION |
SPECIAL PAINTS |
|
|
218 |
TBSC-G.VII-01 |
Supply of Melamine Polish |
1 Lit |
317.00 |
219 |
TBSC-G.VII-02 |
Supply of Interior Grade Poly-Urethane Polish |
1 Lit |
645.00 |
220 |
TBSC-G.VII-03 |
Supply of Exterior Grade Poly-Urethane Polish |
1 Lit |
788.00 |
221 |
TBSC-G.VII-04 |
Supply of grade-1 aluminium paint |
1 Lit |
258.00 |
H |
SECTION |
PARTICLE BOARDS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
MELAMINE FACED PLAIN PARTICLE BOARD |
|
|
222 |
TBSC-H.I-01 |
Melamine faced Single Deco Plain Particle Board- 8 mm thick conforming to IS 3129 |
1 Sqm |
613.00 |
223 |
TBSC-H.I-02 |
Melamine faced Single Deco Plain Particle Board- 12 mm thick conforming to IS 3129 |
1 Sqm |
696.00 |
224 |
TBSC-H.I-03 |
Melamine faced Single Deco Plain Particle Board- 18 mm thick conforming to IS 3129 |
1 Sqm |
806.00 |
225 |
TBSC-H.I-04 |
Melamine faced Single Deco Plain Particle Board- 25 mm thick conforming to IS 3129 |
1 Sqm |
914.00 |
226 |
TBSC-H.I-05 |
Melamine faced Single Deco Plain Particle Board- 35 mm thick conforming to IS 3129 |
1 Sqm |
1,519.00 |
227 |
TBSC-H.I-06 |
Melamine faced Twin Deco Plain Particle Board- 8 mm thick conforming to IS 3129 |
1 Sqm |
706.00 |
228 |
TBSC-H.I-07 |
Melamine faced Twin Deco Plain Particle Board- 12 mm thick conforming to IS 3129 |
1 Sqm |
806.00 |
229 |
TBSC-H.I-08 |
Melamine faced Twin Deco Plain Particle Board- 18 mm thick conforming to IS 3129 |
1 Sqm |
933.00 |
230 |
TBSC-H.I-09 |
Melamine faced Twin Deco Plain Particle Board- 25 mm thick conforming to IS 3129 |
1 Sqm |
1,033.00 |
231 |
TBSC-H.I-10 |
Melamine faced Twin Deco Plain Particle Board- 35 mm thick conforming to IS 3129 |
1 Sqm |
1,941.00 |
II |
SUB-SECTION |
INSULATING PARTICLE BOARDS |
|
|
232 |
TBSC-H.II-01 |
Natural Colour-Insulating Board - 12 mm thick conforming to IS 3348 |
1 Sqm |
229.00 |
233 |
TBSC-H.II-02 |
Natural Colour-Insulating Board - 18 mm thick conforming to IS 3348 |
1 Sqm |
338.00 |
234 |
TBSC-H.II-03 |
Natural Colour-Insulating Board - 25 mm thick conforming to IS 3348 |
1 Sqm |
431.00 |
235 |
TBSC-H.II-04 |
White Insulating Board - 12 mm thickconforming toIS3348 |
1 Sqm |
279.00 |
236 |
TBSC-H.II-05 |
White Insulating Board - 18 mm thickconforming toIS3348 |
1 Sqm |
398.00 |
237 |
TBSC-H.II-06 |
White Insulating Board - 25 mm thickconforming toIS3348 |
1 Sqm |
354.00 |
III |
SUB-SECTION |
MEDIUM DENSITY FIBRE BOARDS |
|
|
238 |
TBSC-H.III-01 |
Medium Fibre Board: Interior Grade - 6 mm thick conforming to IS 15932 |
1 Sqm |
373.00 |
239 |
TBSC-H.III-02 |
Medium Fibre Board: Interior Grade - 8 mm thick conforming to IS 15932 |
1 Sqm |
423.00 |
240 |
TBSC-H.III-03 |
Medium Fibre Board: Interior Grade - 12 mm thick conforming to IS 15932 |
1 Sqm |
566.00 |
241 |
TBSC-H.III-04 |
Medium Fibre Board: Interior Grade - 15 mm thick conforming to IS 15932 |
1 Sqm |
720.00 |
242 |
TBSC-H.III-05 |
Medium Fibre Board: Interior Grade - 18 mm thick conforming to IS 15932 |
1 Sqm |
803.00 |
243 |
TBSC-H.III-06 |
Medium Fibre Board: Interior Grade - 25 mm thick conforming to IS 15932 |
1 Sqm |
1,140.00 |
244 |
TBSC-H.III-07 |
Medium Fibre Board: Interior Grade - 30 mm thick conforming to IS 15932 |
1 Sqm |
1,377.00 |
245 |
TBSC-H.III-08 |
Medium Fibre Board: Interior Grade - 35 mm thick conforming to IS 15932 |
1 Sqm |
1,503.00 |
246 |
TBSC-H.III-09 |
Medium Fibre Board: Exterior Grade - 6 mm thick conforming to IS 15932 |
1 Sqm |
507.00 |
247 |
TBSC-H.III-10 |
Medium Fibre Board: Exterior Grade - 8 mm thick conforming to IS 15932 |
1 Sqm |
590.00 |
248 |
TBSC-H.III-11 |
Medium Fibre Board: Exterior Grade - 12 mm thick conforming to IS 15932 |
1 Sqm |
782.00 |
249 |
TBSC-H.III-12 |
Medium Fibre Board: Exterior Grade - 15 mm thick conforming to IS 15932 |
1 Sqm |
983.00 |
250 |
TBSC-H.III-13 |
Medium Fibre Board: Exterior Grade - 18 mm thick conforming to IS 15932 |
1 Sqm |
1,100.00 |
251 |
TBSC-H.III-14 |
Medium Fibre Board: Exterior Grade - 25 mm thick conforming to IS 15932 |
1 Sqm |
1,466.00 |
252 |
TBSC-H.III-15 |
Medium Fibre Board: Exterior Grade - 30 mm thick conforming to IS 15932 |
1 Sqm |
1,825.00 |
253 |
TBSC-H.III-16 |
Medium Fibre Board: Exterior Grade - 35 mm thick conforming to IS 15932 |
1 Sqm |
2,156.00 |
254 |
TBSC-H.III-17 |
MDF Board: Plain-Interior - 9 mm thick conforming to IS 15932 |
1 Sqm |
342.00 |
255 |
TBSC-H.III-18 |
MDF Board: Plain-Interior - 12 mm thick conforming to IS 15932 |
1 Sqm |
389.00 |
256 |
TBSC-H.III-19 |
MDF Board: Plain-Interior - 18 mm thick conforming to IS 15932 |
1 Sqm |
481.00 |
257 |
TBSC-H.III-20 |
MDF Board: Plain-Interior - 25 mm thick conforming to IS 15932 |
1 Sqm |
578.00 |
258 |
TBSC-H.III-21 |
MDF Board: Plain-Interior - 30 mm thick conforming to IS 15932 |
1 Sqm |
880.00 |
259 |
TBSC-H.III-22 |
MDF Board: Plain-Interior - 35 mm thick conforming to IS 15932 |
1 Sqm |
1,040.00 |
260 |
TBSC-H.III-23 |
MDF Board: Plain-Exterior - 9 mm thick conforming to IS 15932 |
1 Sqm |
447.00 |
261 |
TBSC-H.III-24 |
MDF Board: Plain-Exterior - 12 mm thick conforming to IS 15932 |
1 Sqm |
481.00 |
262 |
TBSC-H.III-25 |
MDF Board: Plain-Exterior - 18 mm thick conforming to IS 15932 |
1 Sqm |
631.00 |
263 |
TBSC-H.III-26 |
MDF Board: Plain-Exterior - 25 mm thick conforming to IS 15932 |
1 Sqm |
792.00 |
264 |
TBSC-H.III-27 |
MDF Board: Plain-Exterior - 30 mm thick conforming to IS 15932 |
1 Sqm |
1,040.00 |
265 |
TBSC-H.III-28 |
MDF Board: Plain-Exterior - 35 mm thick conforming to IS 15932 |
1 Sqm |
1,200.00 |
266 |
TBSC-H.III-29 |
MDF Board: Interior-One Side Laminated -9 mm thick conforming to IS 15932 |
1 Sqm |
536.00 |
267 |
TBSC-H.III-30 |
MDF Board: Interior-One Side Laminated -12 mm thick conforming to IS15932 |
1 Sqm |
606.00 |
268 |
TBSC-H.III-31 |
MDF Board: Interior-One Side Laminated -18 mm thick conforming to IS15932 |
1 Sqm |
705.00 |
269 |
TBSC-H.III-32 |
MDF Board: Interior-One Side Laminated -25 mm thick conforming to IS15932 |
1 Sqm |
792.00 |
270 |
TBSC-H.III-33 |
MDF Board: Interior-One Side Laminated -30 mm thick conforming to IS15932 |
1 Sqm |
1,145.00 |
271 |
TBSC-H.III-34 |
MDF Board: Interior-One Side Laminated -35 mm thick conforming to IS15932 |
1 Sqm |
1,221.00 |
272 |
TBSC-H.III-35 |
MDF Board: Exterior-One Side Laminated -9 mm thick conforming to IS 15932 |
1 Sqm |
616.00 |
273 |
TBSC-H.III-36 |
MDF Board: Exterior-One Side Laminated -12 mm thick conforming to IS 15932 |
1 Sqm |
692.00 |
274 |
TBSC-H.III-37 |
MDF Board: Exterior-One Side Laminated -18 mm thick conforming to IS 15932 |
1 Sqm |
783.00 |
275 |
TBSC-H.III-38 |
MDF Board: Exterior-One Side Laminated -25 mm thick conforming to IS 15932 |
1 Sqm |
916.00 |
276 |
TBSC-H.III-39 |
MDF Board: Exterior-One Side Laminated -30 mm thick conforming to IS 15932 |
1 Sqm |
1,221.00 |
277 |
TBSC-H.III-40 |
MDF Board: Exterior-One Side Laminated -35 mm thick conforming to IS 15932 |
1 Sqm |
1,297.00 |
278 |
TBSC-H.III-41 |
MDF Board: Interior-Both Side Laminated -9 mm thick conforming to IS 15932 |
1 Sqm |
612.00 |
279 |
TBSC-H.III-42 |
MDF Board: Interior-Both Side Laminated -12 mm thick conforming to IS 15932 |
1 Sqm |
692.00 |
280 |
TBSC-H.III-43 |
MDF Board: Interior-Both Side Laminated -18 mm thick conforming to IS 15932 |
1 Sqm |
792.00 |
281 |
TBSC-H.III-44 |
MDF Board: Interior-Both Side Laminated -25 mm thick conforming to IS 15932 |
1 Sqm |
995.00 |
282 |
TBSC-H.III-45 |
MDF Board: Interior-Both Side Laminated -30 mm thick conforming to IS 15932 |
1 Sqm |
1,221.00 |
283 |
TBSC-H.III-46 |
MDF Board: Interior-Both Side Laminated -35 mm thick conforming to IS 15932 |
1 Sqm |
1,297.00 |
284 |
TBSC-H.III-47 |
MDF Board: exterior-Both Side Laminated -9 mm thick conforming to IS 15932 |
1 Sqm |
692.00 |
285 |
TBSC-H.III-48 |
MDF Board: exterior-Both Side Laminated -12 mm thick conforming to IS 15932 |
1 Sqm |
783.00 |
286 |
TBSC-H.III-49 |
MDF Board: exterior-Both Side Laminated -18 mm thick conforming to IS 15932 |
1 Sqm |
926.00 |
287 |
TBSC-H.III-50 |
MDF Board: exterior-Both Side Laminated -25 mm thick conforming to IS 15932 |
1 Sqm |
1,012.00 |
288 |
TBSC-H.III-51 |
MDF Board: exterior-Both Side Laminated -30 mm thick conforming to IS 15932 |
1 Sqm |
1,281.00 |
289 |
TBSC-H.III-52 |
MDF Board: exterior-Both Side Laminated -35 mm thick conforming to IS 15932 |
1 Sqm |
1,374.00 |
IV |
SUB-SECTION |
CEMENT BONDED PLAIN & PARTICLE BOARDS |
|
|
290 |
TBSC-H.IV-01 |
Cement Bonded Board conforming to IS:14862- 2000 - 4mm Thick |
1 Sqm |
145.00 |
291 |
TBSC-H.IV-02 |
Cement Bonded Board conforming to IS:14862- 2000 - 6mm Thick |
1 Sqm |
207.00 |
292 |
TBSC-H.IV-03 |
Cement Bonded Board conforming to IS:14862- 2000 - 8mm Thick |
1 Sqm |
266.00 |
293 |
TBSC-H.IV-04 |
Cement Bonded Board conforming to IS:14862- 2000 - 10mm Thick |
1 Sqm |
306.00 |
294 |
TBSC-H.IV-05 |
Cement Bonded Board conforming to IS:14862- 2000 - 12mm Thick |
1 Sqm |
382.00 |
295 |
TBSC-H.IV-06 |
Cement Bonded Board conforming to IS:14862- 2000 - 14mm Thick |
1 Sqm |
426.00 |
296 |
TBSC-H.IV-07 |
Cement Bonded Board conforming to IS:14862- 2000 - 16mm Thick |
1 Sqm |
485.00 |
297 |
TBSC-H.IV-08 |
Cement Bonded Board conforming to IS:14862- 2000 - 18mm Thick |
1 Sqm |
550.00 |
298 |
TBSC-H.IV-09 |
Cement Bonded Board conforming to IS:14862- 2000 - 20mm Thick |
1 Sqm |
583.00 |
299 |
TBSC-H.IV-10 |
Cement bonded particle board conforming to IS 14276-6 mm thick |
1 Sqm |
221.00 |
300 |
TBSC-H.IV-11 |
Cement bonded particle board conforming to IS 14276- 8 mm thick |
1 Sqm |
303.00 |
301 |
TBSC-H.IV-12 |
Cement bonded particle board conforming to IS 14276- 10 mm thick |
1 Sqm |
376 |
302 |
TBSC-H.IV-13 |
Cement bonded particle board conforming to IS 14276- 12 mm thick |
1 Sqm |
452 |
303 |
TBSC-H.IV-14 |
Cement bonded particle board conforming to IS 14276- 16 mm thick |
1 Sqm |
596 |
304 |
TBSC-H.IV-15 |
Cement bonded particle board conforming to IS 14276- 20 mm thick |
1 Sqm |
740 |
305 |
TBSC-H.IV-16 |
Cement bonded particle board conforming to IS 14276- 25 mm thick |
1 Sqm |
942 |
306 |
TBSC-H.IV-17 |
Cement bonded particle board conforming to IS 14276- 30 mm thick |
1 Sqm |
1124 |
307 |
TBSC-H.IV-18 |
Cement bonded particle board conforming to IS 14276- 40 mm thick |
1 Sqm |
1480 |
308 |
TBSC-H.IV-19 |
Pre-laminated cement bonded particle board-6 mm thick |
1 Sqm |
526.00 |
309 |
TBSC-H.IV-20 |
Pre-laminated cement bonded particle board-8 mm thick |
1 Sqm |
568.00 |
310 |
TBSC-H.IV-21 |
Pre-laminated cement bonded particle board- 10 mm thick |
1 Sqm |
610.00 |
311 |
TBSC-H.IV-22 |
Pre-laminated cement bonded particle board- 12 mm thick |
1 Sqm |
667.00 |
312 |
TBSC-H.IV-23 |
Pre-laminated cement bonded particle board- 16 mm thick |
1 Sqm |
741.00 |
313 |
TBSC-H.IV-24 |
50 mm thick SOLID WALL PANEL Sandwich panels made of light weight FRACC non-asbestos fibre reinforced cement concrete |
1 Sqm |
971.00 |
314 |
TBSC-H.IV-25 |
75 mm thick SOLID WALL PANEL Sandwich panels made of light weight FRACC non-asbestos fibre reinforced cement concrete |
1 Sqm |
1,166.00 |
J |
SECTION |
PLYWOODS, LAMINATES & VENEERS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
MOISTURE RESISTANT (MR) GRADE |
|
|
315 |
TBSC-J.I-01 |
3 Ply - 4 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
369.00 |
316 |
TBSC-J.I-02 |
5 Ply - 6 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
408.00 |
317 |
TBSC-J.I-03 |
5 Ply - 8 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
479.00 |
318 |
TBSC-J.I-04 |
5 Ply - 9 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
479.00 |
319 |
TBSC-J.I-05 |
9 Ply - 12 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
601.00 |
320 |
TBSC-J.I-06 |
9 Ply - 15 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
885.00 |
321 |
TBSC-J.I-07 |
9 Ply - 18 mm thick Plywood conforming to IS:303 MR Grade |
1 Sqm |
867.00 |
II |
SUB-SECTION |
BOILING WATER RESISTANT (BWR) GRADE |
|
|
322 |
TBSC-J.II-01 |
3 Ply - 4 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
422.00 |
323 |
TBSC-J.II-02 |
5 Ply - 6 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
495.00 |
324 |
TBSC-J.II-03 |
5 Ply - 8 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
617.00 |
325 |
TBSC-J.II-04 |
5 Ply - 9 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
583.00 |
326 |
TBSC-J.II-05 |
9 Ply - 12 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
762.00 |
327 |
TBSC-J.II-06 |
9 Ply - 15 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
1,093.00 |
328 |
TBSC-J.II-07 |
9 Ply - 19 mm thick Plywood conforming to IS:303 BWR Grade |
1 Sqm |
1,097.00 |
III |
SUB-SECTION |
VENEERED DECORATIVE PLYWOOD |
|
|
329 |
TBSC-J.III-01 |
3 Ply-4 mm thick One side Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
546.00 |
330 |
TBSC-J.III-02 |
5 Ply - 6 mm thick One side Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
711.00 |
331 |
TBSC-J.III-03 |
5 Ply - 9 mm thick One side Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
912.00 |
332 |
TBSC-J.III-04 |
9 Ply - 12 mm thick One side Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
1,161.00 |
333 |
TBSC-J.III-05 |
5 Ply - 9 mm thick Both sides Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
1,190.00 |
334 |
TBSC-J.III-06 |
9 Ply - 12 mm thick Both sides Teak Veneered Decorative Plywood conforming to IS:1328 |
1 Sqm |
1,387.00 |
IV |
SUB-SECTION |
LAMINATES |
|
|
335 |
TBSC-J.IV-01 |
Melamine Laminate Sheets - Glossy Finish: 1.00 mm thick |
1 Sqm |
366.00 |
336 |
TBSC-J.IV-02 |
Melamine Laminate Sheets - Glossy Finish: 1.50 mm thick |
1 Sqm |
524.00 |
337 |
TBSC-J.IV-03 |
Melamine Laminate Sheets - Glossy Finish: 1.80 mm thick |
1 Sqm |
575.00 |
338 |
TBSC-J.IV-04 |
Melamine Laminate Sheets - Mat Finish: 1.00 mm thick |
1 Sqm |
389.00 |
339 |
TBSC-J.IV-05 |
Melamine Laminate Sheets - Mat Finish: 1.50 mm thick |
1 Sqm |
541.00 |
340 |
TBSC-J.IV-06 |
Melamine Laminate Sheets - Mat Finish: 1.80 mm thick |
1 Sqm |
583.00 |
V |
SUB-SECTION |
COMMERCIAL VENEERS |
|
|
341 |
TBSC-J.V-01 |
Teak Veneer Lamination of 4 mm thick with Pencil Grains conforming to IS 14315 |
1 Sqm |
409.00 |
342 |
TBSC-J.V-02 |
Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315 |
1 Sqm |
752.00 |
K |
SECTION |
CEILINGS, WALL PARTITIONS & WALL LININGS |
|
|
|
|
(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking) |
|
|
I |
SUB-SECTION |
FALSECEILINGs-TILES/SHEETS |
|
|
343 |
TBSC-K.I-01 |
Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 12.5 mm thick as per IS 2095 -1992 |
1 Sqm |
255.00 |
344 |
TBSC-K.I-02 |
Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 9 mm thick as per IS 2095 -1992 |
1 Sqm |
249.00 |
345 |
TBSC-K.I-03 |
Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 |
1 Sqm |
225.00 |
346 |
TBSC-K.I-04 |
DELETED |
|
|
347 |
TBSC-K.I-05 |
14 mm - Mineral Fibre sheet 600 x 600 ofBoard / Tegular Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, LightReflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 |
1 Sqm |
535.00 |
348 |
TBSC-K.I-06 |
15 mm - Mineral Fibre sheet 600 x 600 ofBoard / Tegular Edge tiles with a Humidity Resistance of 95% RH, Average NRC 0.50, LightReflectance >85%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 |
1 Sqm |
626.00 |
349 |
TBSC-K.I-07 |
16 mm - Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 99% RH, Average NRC 0.60, Light Reflectance >85%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 |
1 Sqm |
674.00 |
350 |
TBSC-K.I-08 |
Designer ceiling Cement Boards -thickness 3.2 mm |
1 Sqm |
235.00 |
351 |
TBSC-K.I-09 |
High pressure steam cured Cement Boards4 mmthick |
1 Sqm |
126.00 |
352 |
TBSC-K.I-10 |
High pressure steam cured Cement Boards6 mmthick |
1 Sqm |
189.00 |
353 |
TBSC-K.I-11 |
High pressure steam cured Cement Boards8 mmthick |
1 Sqm |
251.00 |
354 |
TBSC-K.I-12 |
High pressure steam cured Cement Boards 10 mm thick |
1 Sqm |
314.00 |
355 |
TBSC-K.I-13 |
High pressure steam cured Cement Boards 12 mm thick |
1 Sqm |
376.00 |
356 |
TBSC-K.I-14 |
High pressure steam cured Cement Boards 14 mm thick |
1 Sqm |
439.00 |
357 |
TBSC-K.I-15 |
High pressure steam cured Cement Boards 16 mm thick |
1 Sqm |
503.00 |
358 |
TBSC-K.I-16 |
High pressure steam cured Cement Boards 18 mm thick |
1 Sqm |
564.00 |
359 |
TBSC-K.I-17 |
High pressure steam cured Cement Boards 20 mm thick |
1 Sqm |
628.00 |
360 |
TBSC-K.I-18 |
High pressure steam cured designer Cement Boards 4 mm thick |
1 Sqm |
185.00 |
361 |
TBSC-K.I-19 |
High pressure steam cured designer Cement Boards 6 mm thick |
1 Sqm |
272.00 |
362 |
TBSC-K.I-20 |
Calcium Silicate Boards - 6mm thick |
1 Sqm |
209.00 |
363 |
TBSC-K.I-21 |
Calcium Silicate Boards - 8mm thick |
1 Sqm |
279.00 |
364 |
TBSC-K.I-22 |
Calcium Silicate Boards - 10mm thick |
1 Sqm |
349.00 |
365 |
TBSC-K.I-23 |
Calcium Silicate Boards - 12mm thick |
1 Sqm |
418.00 |
366 |
TBSC-K.I-24 |
Supply of Thermocol 12 mm thick sheets |
1 Sqm |
24.00 |
367 |
TBSC-K.I-25 |
Supply of Thermocol 19 mm thick sheets |
1 Sqm |
42.00 |
368 |
TBSC-K.I-26 |
Supplying and fixing of false ceiling using Plaster of Paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete |
1 Sqm |
402.00 |
369 |
TBSC-K.I-27 |
Supplying and fixing of false ceiling using Plaster of Paris Boards 10 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete |
1 Sqm |
335.00 |
370 |
TBSC-K.I-28 |
Supply and fixing false ceiling using 8 mm thick Cement Bonded particle boards conforming to IS 14276 with galvanized and pre painted steel T section of size 24mm x 38mm x 0.3 mm for main T duty pre punched to accept cross T section of size 24mm x 30mm x 0.3 mm duly punched at both ends for insertion into main T. The grid size will be 610mm x 610mm. The frame work (grid) is suspended to the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with necessary fixers to the roof and frame work the cost is inclusive of necessary hardware, labour, onecoat of primer (Both side) and two coats of smooth finish on visibleside. |
1 Sqm |
1,146.00 |
371 |
TBSC-K.I-29 |
Providing and fixing false ceiling consisting of 600 mm x 600 mm, Solid PVC insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet and EPS as defined in of desired thickness depending on insulation required shall be insert in a frame work made using anodized aluminium Tee section of sizes 1”X1”(25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’ (600X600mm). The aluminium framework is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level etc.the aluminium framework is supported on side wall with the use of aluminium 1”X1” (25X25mm) angles, complete as per direction of Engineer-in- Charge &drawing |
1 Sqm |
1,230.00 |
372 |
TBSC-K.I-30 |
Supply and fixing of PVC false ceiling on MS/GI made skeleton framework. The frame shall be24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250 mm with a wall thickness of 1mm ±0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections,complete,forfinisheditemofwork. |
1 Sqm |
1,366.00 |
373 |
|
15 mm - Micro Look Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 95% RH, Average NRC 0.90, Light Reflectance >88%, Thermal Conductivity λ = 0.032 w/mk, Fire Performance Class 0/Class 1suitable for Green Building application, with Recycled content of 88% (FG) |
1 Sqm |
1,410.00 |
374 |
|
16 mm - Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 99% RH, Average NRC 0.55, Light Reflectance >84%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 |
1 Sqm |
625.00 |
375 |
|
Providing & Fixing of Lay-in-metal plain ceiling System consisting of 600 x 600mm Lay in GI tiles of pre coated galvanised steel in 0.5 mm thickness in white colour to be laid on grid systems with 15mm wide T - section flanges but excluding cost of Grid systems complete for finished item of work |
1 Sqm |
680.00 |
376 |
|
Providing & Fixing of GI Lay in Standard Perforated(2.5mm diameter-16% open area) metal ceiling consisting of 600 x 600 mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color acoustical fleece hot pressed to the back of the perforated tile to be laid on grid systems with 0.5 mm thickness in white colour with 15mm wide T - section flanges but excluding cost of Grid systems and having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees and the tiles with NRC of 0.70, Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 600 mm suitable for Green Building application, with Recycled content of 25% complete for finished item of work |
1 Sqm |
974.00 |
II |
SUB-SECTION |
FALSE CEILINGs - SECTIONS & ACCESSORIES |
|
|
377 |
TBSC-K.II-01 |
G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm |
1 RM |
67.00 |
378 |
TBSC-K.II-02 |
G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mmthick |
1 RM |
78.00 |
379 |
TBSC-K.II-03 |
G.I. intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm |
1 RM |
77.00 |
380 |
TBSC-K.II-04 |
G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm (web) of 0.55 mm thick |
1 RM |
67.00 |
381 |
TBSC-K.II-05 |
G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm |
1 RM |
38.00 |
382 |
TBSC-K.II-06 |
G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm |
1 RM |
34.00 |
383 |
TBSC-K.II-07 |
GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick |
1 RM |
50.00 |
384 |
TBSC-K.II-08 |
Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 mm |
1 RM |
37.00 |
385 |
TBSC-K.II-09 |
Polyester painted GI - T Section - 24 x 32 mm |
1 RM |
45.00 |
386 |
TBSC-K.II-10 |
Polyester painted GI - T Section - 24 x 25 mm |
1 RM |
41.00 |
387 |
TBSC-K.II-11 |
Polyester painted GI - T Section - 24 mm x 27 mm |
1 RM |
42.00 |
388 |
TBSC-K.II-12 |
Aluminium Angle : 24 mm x 24 mm |
1 RM |
24.00 |
389 |
TBSC-K.II-13 |
Anodized Aluminium T Section : 24 x 24.5 x 2.4 mm |
1 RM |
31.00 |
390 |
TBSC-K.II-14 |
Connecting Clips |
1 Each |
3.00 |
391 |
TBSC-K.II-15 |
Rawl Plug |
1 Each |
3.00 |
392 |
TBSC-K.II-16 |
6 mm Nylon Rawl Plug |
1 Each |
3.00 |
393 |
TBSC-K.II-17 |
Soffit Cleats |
1 Each |
3.00 |
394 |
TBSC-K.II-18 |
Drywall Screws - 25 mm |
1 Each |
3.00 |
395 |
TBSC-K.II-19 |
Jointing Compound |
1 Kgs |
27.00 |
396 |
TBSC-K.II-20 |
Jointing Paper Tape |
1 RM |
5.00 |
397 |
TBSC-K.II-21 |
Drywall Top Coat |
1 Lit |
129.00 |
398 |
TBSC-K.II-22 |
Universal Holding Clips |
1 Each |
3.00 |
399 |
TBSC-K.II-23 |
4 mm Diameter GI Connecting Rod |
1 RM |
11.00 |
****