CIVIL ITEMS-II



400

TBSC-K.II-24

2 mm Diameter GI Connecting Rod

1 RM

10.00

 

III

SUB-SECTION

WALL LINING & PANELLING

 

 

 

401

TBSC-K.III-01

Providing wooden panelling 12 mm thick prelaminated particle board fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x

12.7 mm) size BT wood ornamental cover beading and necessary screws, synthetic glue complete for finished item of work.

1 Sqm

1,650.00

 

402

TBSC-K.III-02

Perforated wall panels channelled wood works sheets of width 128 mm, thickness of 16mm and length 2440 mm made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side, with a special perforation pattern fluted perforation on the visible surface with a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476 with a “tongue-and-grooved” edges and the back of the perforated panel is with sound absorbing non- woven acousticalfleece

1 Sqm

3,185.00

 

403

TBSC-K.III-03

Supply and fixing of wall lining fixing to GI channels of perimeter channel 30mm x 27mm x

0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and finishing using joint compound and glass fibre tape complete finish as per specification without painting for finished item of work: using 8mmthick Calcium silicate boards

1 Sqm

697.00

 

404

TBSC-K.III-04

Supply and fixing of wall lining fixing to GI channels of perimeter channel 30mm x 27mm x

0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and finishing using joint compound and glass fibre tape complete finish as per specification without painting for finished item  of work: Using 10mm

thick Calcium silicate boards

1 Sqm

769.00

 

405

TBSC-K.III-05

Supply and fixing of wall lining fixing to GI channels of perimeter channel 30mm x 27mm x

0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and finishing using joint compound and glass fibre tape complete finish as per specification without painting for finished item of work: Using 12mm thick Calcium silicate boards

1 Sqm

838.00

 

406

TBSC-K.III-06

Supply and fixing of cement board (conforming to IS:14862:2000) wall panelling with frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick placed at every 610 mm C/C intervals fixed vertically in between floor and roof `U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and fixing with self tappingself embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”. The Gap will be covered with a decorative beading. Surface will be given a smooth finish over a coat of primer. - With 8 mm Cement Bonded Board

1 Sqm

840.00

 

407

TBSC-K.III-07

Supply and fixing of cement board (conforming to IS:14862:2000) wall panelling with frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick placed at every 610 mm C/C intervals fixed vertically in between floor and roof `U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and fixing with self tappingself embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”. The Gap will be covered with a decorative beading. Surface will be given a smooth finish over a coat of primer. - With 10 mm Cement Bonded Board

1 Sqm

967.00

 

408

TBSC-K.III-08

Supply and fixing Cement Bonded Particle Board conforming to IS 14276 wall panelling using 10 mm Cement Bonded Particle Board conforming to IS 14276 with frame work made of GI stud section of size 48mm x 35mm x 0.55mm thick placed at every 610 mm C/C intervals vertically and at 1200mm internals horizontally fixed to the wall by means of self expansion screws and caps and Cement Bonded Particle Board conforming to IS 14276 is to be fixed to frame by means of self taping screws placed at every 300 mm intervals leaving 3mm gap between two panels. The cost inclusive of one coat of synthetic plastered primer and two coats of synthetic smooth finished putty and cost & conveyance of all materials, labour charges etc. complete as per the direction of Engineer in charge.

1 Sqm

1444.00

 

409

TBSC-K.III-09

Supply and fixing of Cement Bonded Pre- laminated Particle Board wall panelling using 12 mm Cement Bonded Pre-laminated Particle with frame work made of G.I stud section of size 48mm x 35mm x 0.55mm thick placed at every 610mm intervals vertically and at 1200mm internals horizontally fixed to the wall by means of self expansion screws and caps. Cement Bonded Pre-laminated Particle is to be fixed to frame by means of self-taping screws placed at every 300mm intervals leaving 3mm gap between two panels. The cost inclusive of Conveyance of materials, Labour charges etc.,

1 Sqm

2128.00

 

410

TBSC-K.III-10

Providing and fixing plain PVC rigid foam sheet wall panelling of thickness 5mm consisting of panels having size 1220mm X2440mm stuck on inner frame work of 25mm wide strips of 5mm thick PVC rigid foam sheet. The strips should have in their centre a grove of 6mm width and 2mm depth for sinking the head of the screw used to fix the strips to the wall and should be placed      vertically          at                     equal                intervals            of 405/407mm centre to c entre. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 300mm. a groove of 2mm maybeleftatthejointoftwopanelsforaesthetic looks. This framework is done for making existing wall surface in ensured level and for sticking the wall panelling sheet (panel) on it. The exact size of the panel and correspondingly of the grid May be varied depending n the size of thewall.Howeveritmustensuredthatastripsof 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. , complete as per direction of Engineer-in-Charge, manufacture’s specification&drawing

1 Sqm

1,892.00

 

411

TBSC-K.III-11

Providing and fixing INSULATED PVC WALL panelling shall consist of PVC insulated panels having wall thickness of 1mm/1.5mm/2mm PVC sheet and the desired thickness of EPS (dependent on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all from sides of the panel.The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuckusing solvent cement adhesive at the places where two panels are joined, so a to cover the screw of both the panels, using solvent cement. 90 heat bent strips of 5mm thick PVC sheets of width 75mm X75mm feathered at the edges shall be stuck at wall joints / pillars etc. , complete as per direction of Engineer-in-Charge, manufacture’s specification &drawing

1 Sqm

1,992.00

 

412

TBSC-K.III-12

Supply and fixing of wall panelling on the framework of wooded rippers of 24 X 24mm of required size. The entire framework shall be panelled with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm. The panels are joined with tongue and groove system. Necessary cut-outs for electrical connections to be provided at required places complete, for finished item of work.

1 Sqm

1,293.00

 

IV

SUB-SECTION

PARTITIONS

 

 

 

413

TBSC-K.IV-01

Supply & fixing 75mm thick metal stud partition using 12.5 mm thick Gypboard conforming to IS 2095-1982 screw fixed to either side to 48 mm studs of 0.55 mm thick with the 50 mm floor and ceiling channel 0.55 mm and the joints duly finished with joint compound, paper tape and two coats Dry wall top coat as per specification.

1 Sqm

1,114.00

 

414

TBSC-K.IV-02

Supply and Fixing 66mm thick metal stud partition screw fixed to either side of 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm and the joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification finished Item of work- using 8mm thick Calcium silicate boards

1 Sqm

1,176.00

 

415

TBSC-K.IV-03

Supply and Fixing 66mm thick metal stud partition screw fixed to either side of 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm and the joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification finished Item of work - Using10mm thick Calcium silicateboards

1 Sqm

1,317.00

 

416

TBSC-K.IV-04

Supply and Fixing 66mm thick metal stud partition screw fixed to either side of 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm and the joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification finished Item of work - Using12mm thick Calcium silicateboards

1 Sqm

1,456.00

 

417

TBSC-K.IV-05

Supply and Fixing 66mm thick metal stud partition using 2 layers of 12mm thick Calcium silicate boards screw fixed to either side to 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm.The boards joints are to be staggered to avoid through passage. Ceramic wool of 50mm thick, 64kg/m3 densityis to be placed in cavity of the partition. The joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification with out painting for finished item ofwork

1 Sqm

3,907.00

 

418

TBSC-K.IV-06

Supply and fixing double skin cement board (conforming to IS:14862:2000) partition with Frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick placed at every 610 mm C/C intervals and 1220 mm horizontal intervals duly            fixed                with        self         expansion                      screws, thecementboardof8mmthickcladdedaroundwith self tappingself embedding screws fixed at every 300 mm (centres) leaving 3 mm gap between two panels and the gap will be covered with decorative moulding surface will be given a smooth finish over cement primer. The rate is inclusive of cost and conveyance of all materials and labour chargesetc.complete.

1 Sqm

1,466.00

 

419

TBSC-K.IV-07

Providing and fixing of 50 mm thick SOLIDWALL PANEL Sandwich panels made of light Weight FRACC two 5 mm thick non-asbestos fibre reinforced                             cement       sheets       (conforming       to IS:14862:2000) on either side of the lightweight concrete core composed of Portland cement binders with tongue and groove arrangement. Thebottomofthepanelshallbefixedtothefloor channel made up of 1 mm thick GI channels of size 28x52x31 mm fixed to the existing floor with 6x60mm nylon self expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of 0.8 mm thick GI Channel of size 31x52x31 mm duly fixed to the existing ceiling with 6x60mm nylon self expansion screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the panels have to be fixed by applying the mixture of fly ash and sodium silicate in between and Everest jointing compound all the exposed joints. The rate includes cost of 50mm SOLID WALL PANELS, G.l. Floor and ceiling channel. The panels can be flushed by using paper tape and Everest jointing compoundallcomplete

1 Sqm

1,514.00

 

420

TBSC-K.IV-08

Providing and fixing of 75mm thick SOLID WALL PANEL Sandwich panels made of light Weight FRACC two 5 mm thick non-asbestos fibre reinforced                             cement       sheets       (conforming       to IS:14862:2000) on either side of the lightweight concrete core composed of Portland cement binders with tongue and groove arrangement. Thebottomofthepanelshallbefixedtothefloor channel made up of 1 mm thick GI channels of size 28x77x31 mm fixed to the existing floor with 6x60mm nylon self expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of 0.80 mm thick GI Channel of size 31x77x31 mm duly fixed to the existing ceiling with 6x60mm nylon self expansion screws at 600 mm C/C. All the tongue and groove joints of the panels havetobe

1 Sqm

1,806.00

 

421

TBSC-K.IV-09

Supply & fixing of 50 mm thick partition with composite panel comprise of two 5mm thick Boards (asbestos-free fibre reinforced cement sheets conforming to IS 14862) strongly bonded with core material which is light weight concrete mix of Portland cement, expanded polystyrene bead aggregates and admixture. s with unique semi-circular Tongue & Groove Joining System provides better stability, rapid installation and better workability. The bottom of the panel shall be fixed to the floor channel made up of 1 mm thick GI channels of size 28x52x31 mm fixed to the existing floor with 6x60mm nylon self- expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of 0.8 mm thick GI Channel of size 31 x 52 x 31 mm duly fixed to the existing ceiling with 6x60mm nylon self-expansion screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the panels have to be fixed by applying the jointing compound in all the exposed joints. The rate includes cost of 50mm S, G.l. Floor and ceilingChannel.

1 Sqm

1514.00

 

422

TBSC-K.IV-10

Supply & fixing of 75 mm thick partition with composite panel comprise of two 5mm thick Boards (asbestos-free fibre reinforced cement sheets conforming to IS 14862) strongly bonded with core material which is light weight concrete mix of Portland cement, expanded polystyrene bead aggregates and admixture. s with unique semi-circular Tongue & Groove Joining System provides better stability, rapid installation and better workability. The bottom of the panel shall be fixed to the floor channel made up of 1 mm thick GI channels of size 28x77x31 mm fixed to the existing floor with 6x60mm nylon self- expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of 0.8 mm thick GI Channel of size 31x77x31 mm duly fixed to the existing ceiling with 6x60mm nylon self-expansion screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the panels have to be fixed by applying the jointing compound in all the exposed joints. The rate includes cost of 75mm S, G.l. Floor and ceilingChannel.

1 Sqm

1,806.00

 

423

TBSC-K.IV-11

Supply and fixing double skin partition using with 10 mm Cement Bonded Particle Board conforming to IS 14276 made out of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of self expansion screws and caps to the wall and roof the panel is to be fixed both sides of frame work by using self taping screws fixed at every 300mm intervals to the frame work leaving 3 mm gap between two panels. The cost inclusive with one coat of synthetic primer and two coats of synthetic plaster smooth finish and cost and conveyance of all materials to site, labour charges etc., complete as per the direction of Engineer in charge.

1 Sqm

2,208.00

 

424

TBSC-K.IV-12

Supply and fixing of Cement Bonded Prelaminated Particle Board double skin partition using with 10 mm Cement Bonded Prelaminated Particle Board made out of G.I track section of size 50 mm x 35mm x 0.55mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm internals horizontally. The frame is fixed by means of self expansion screws and caps to the wall / roof. Cement Bonded Prelaminated Particle Board is to be fixed both sides of the frame work by using 2mm thick electro platedCR flat section leaving 3mm gap between two panels. The cost inclusive of costandconveyance

1 Sqm

3,042.00

 

425

TBSC-K.IV-13

Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Prelaminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.

1 Sqm

3,507.00

 

426

TBSC-K.IV-14

Providing and fixing 50mm thick SEMI HEIGHT SOLID PVC PARTITION consisting of 49mm sandwich PVC panel made out of 36mm high density expanded polystyrene sheet(E.P.S.- Thermocol) stuck on both side with 2mm thick plain/printed /prelam PVC rigid foam sheets reinforced with frame work made from 35mmX5mm M.S. Angle. In between two M.S. Angles 5mm thick plain/printed/prelam heat moulded “” PVC ‘C’ channel of size 50X100mm with feathered edges shall be fixed on the floor & 50X75mm with feathered edges plain/printed

/prelam PVC ‘C’ channel. In between adjoining EPS sandwiched PVC partitions panel 5mm thickX75mm width plain/printed/prelam PVC sheet feathered at edges shall be stuck on front& back face using solvent cement etc. in places where two partitions meet to from an ‘L’ shape the panels are joined 5mm thick plain/printed/prelam heat moulded “” PVC ‘L’ section of size 75mmX75mm with feathered edges shall be fixed on front & back side. This is done to maintain the symmetry of design. An additional5mmthickPVCstripof40mmwidthis to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive, complete as per direction of Engineer-in-Charge, manufacture’s specification &drawing

1 Sqm

2,688.00

 

427

TBSC-K.IV-15

Supply and fixing of PVC Double Skin Partition. The entire framework shall be carried out by mild steel section having overall dimensions of 24 X 48mm with a wall thickness of 1.2mm. The entire framework shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm both sides. Glass provision/Door provision can be provided along the partition wherever required. Partitions can be made full or half as per

1 Sqm

2,269.00

 

428

TBSC-K.IV-16

Supply and fixing double skin cement based Board partition with Frame work made of GI stud profile of size 48x40x 10x 0.6 mm thick placed at every 610 mm C/C intervals and 915 mm horizontal intervals duly fixed with self expansion screws, the Cement Bonded Board of 8 mm thick cladded around with self tappingself embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”(610 mm). The Gap will be covered with a decorative moulding surface will be given a smooth finish over cement primer. The rate Inclusive of cost and conveyance of all materials and labour charges etc., Complete. DOUBLESKINPARTITION

1 Sqm

1,269.00

 

429

TBSC-K.IV-17

Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM). Primer coated withepoxy primer of 5-7 microns thick, finish painted witha polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottomrail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be panelled with 9mm pre-laminated particle board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diametermine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket Centremullions are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diametermine Monomer (EPDM).CornerbracketsmadeofCRCAwithzinc phosphate. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work Fixed Partition: Outerframe section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of18x25mm.

1 Sqm

4,488.00

 

430

TBSC-K.IV-18

Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM). Primer coated withepoxy primer of 5-7 microns thick, finish painted witha polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottomrail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be panelled with 9mm pre-laminated particle board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diametermine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket Centremullions are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diametermine Monomer (EPDM).CornerbracketsmadeofCRCAwithzinc phosphate. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter should be of 46x46mm and section for middle & bottom should be ofsize23x130mm

1 Sqm

5,118.00

 

L

SECTION

DOORS, SHUTTERS & FRAMES

 

 

 

 

 

(Excluding taxes but including cost of loading,

cost of conveyance, unloading & stacking)

 

 

 

I

SUB-SECTION

DOOR FRAMES

 

 

 

431

TBSC-L.I-01

Mild Steel Hallow single rebate general purpose door frames manufactured using cold rollformed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pre-treatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for both single and double shutter doors

1 Rm

343.00

 

432

TBSC-L.I-02

Powder Coated Mild Steel Hallow single rebate door frames manufactured using cold rollformed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile size of

105 x 60 mm conforming to IS 4351 - 2003 including pre-treatment, Galvanized as per IS:277, zinc phosphating finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 60 – 65 microns(Dry film thickness)Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush tothe frame with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc.forbothsingleanddoubleshutterdoors

1 RM

631.00

 

433

TBSC-L.I-03

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made outof extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with19x19mmM.S.Squaretubeof19gauge.The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item ofwork

1 Rm

296.00

 

434

TBSC-L.I-04

SUPPLY &FIXING SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT)

Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS. Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in- charge.

1 Rm

310.00

 

435

TBSC-L.I-05

Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metre-cut/ welded. PVC DOOR FRAME

1 RM

232.00

 

436

TBSC-L.I-06

Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X

46 mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be mitre cut/welded

1 RM

183.00

 

437

TBSC-L.I-07

Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA section, size should be 50x60mm with 32mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. complete for finished item.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 60 mm

1RM

200.00

 

438

TBSC-L.I-08

Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA section, size should be 50x60mm with 32mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. complete for finished item.: Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer frame section size of 50 x 60 mm

1 RM

200.00

 

439

TBSC-L.I-09

Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick CRCA section, size should be 50 x 75 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. Complete for finisheditemofwork.:Singleshutter3'-0"x7'-0" (914.4x2133.6mm) outer frame section size of 50 x75mm

1 RM

226.00

 

440

TBSC-L.I-10

Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick CRCA section, size should be 50 x 75 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. Complete for finisheditemofwork.:Singleshutter5'-0"x7'-0" (1524x2133.6mm) outer frame section size of50 x 75mm

1 RM

226.00

 

441

TBSC-L.I-11

Providing and fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6Nos. with split end tail. d) Nylon Aldrops Receiver – 1 No. for single shutter frame. e)Tie Rod –1No

1 RM

691.00

 

442

TBSC-L.I-12

Providing and fixing of door frames factory made, internal door frames without threshold, fabricated from pre painted cold roll formed section 100 mm x 60 mm made of galvanized (base steel as per IS-513 ‘D’ quality galvanized as per IS-277 with Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness of 1 mm primer coated with epoxy primer of 5-7 microns thick finish painted with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns, the frame section filled with polyurethane (PUFoam) of 40 kg/Cum and the sections cut to length and mitre joined by means of 1.25 mm thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25 mm thick electroplated stiffeners of size 150 mm for fixing hold fastsand hinges with MS Powder coated fittings a) 6Nos

M.S. Z Type hold fasts made of 30 mm x 3 mmMS flat of 230 mm long, 3 Nos each size expandable PVC covered screw type fasteners b) 2.5 mm x 300 mm long ‘T’ hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf/leaf) c) 12 mm Diameter MS tie rod at bottom with necessarysizeofnutsoneitherside.

1 RM

433.00

 

443

TBSC-L.I-14

SupplyandfixingoffactorymadeBathroomdoor frames without threshold, fabricated from pre- painted cold roll formed section 50mm x 50 mm made of galvanized steel as per IS – 513 ‘D’ quality, galvanized as per IS-277 steel colour coated sections primer coated with epoxyprimer finish painted with polyester paint the frame section filled with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections joined by means of 1.25mm                    thick                        CRCA      electroplated                          corner brackets of size 75 x 75 mm and 1.25mm thick electroplated stiffeners of size 150mm for fixing hold fasts and hinges together with the following MS Power coated fitting (Supply and fixing) of approved make. a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long, 3 Nos each side expandable PVC covered screw type fasteners b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )c) 12 mm Diameter MS tie rod at bottom with necessary size of nuts on either side.

1 RM

391.00

 

444

TBSC-L.I-16

Supply of factory made Precast Reinforced Cement concrete door frame of with overall dimension of 60 x 100 mm for single shutter door (+/-2mm) three nos, of 6mm dia steel bars are used for longitudinal reinforcement for each vertical and horizontal member and are held firmly by 3mm dia ties spaced at not more than 300mm c/c Polymer wonder blocks areprovided in the frames for tower bolt and hinges provisions made in the frame for Aldrops provisions are made in the vertical member for fixing of 3 nos. hold-fasts with 8 mm dia bolts and the frame surface shall be smooth without any voids and shall confirm to IS 6523 complete finished item including all taxes as per specifications & the directions of the Engineer- in-Charge.

1 RM

300.00

 

445

TBSC-L.I-18

Supply of factory made Precast Reinforced Cement concrete double door frame of the door frame shall have overall dimension of 60 x 125 for single shutter door(+/-2mm) four nos, of 6mm dia steel bars are used for longitudinal reinforcement for each vertical and horizontal member and are held firmly by 3mm dia ties spaced at not more than 300mm c/c Polymer wonder blocks for fixing of tower bolt andhinges with provision for Aldrops and 3 nos. hold-fasts with 8mm dia bolts and the frame surface shall be smooth without any voids and shall confirm to IS 6523 complete finished item including all taxes as per specifications & the directions of the Engineer-in-Charge.

1 RM

390.00

 

446

TBSC-L.I-20

Fixing of precast RCC frames (Precast RCC framed members to be supplied at site)including assembling the members for door frames fixing to MS masonry or RCC wall face including providing and fixing Six no. hold-fasts of MS Flat 40x5mm and length 40cm per frame embedding in cement concrete blocks of size 30x10x15 cm of mix (1 cement:3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) complete as per specification & the directions of the Engineer-in- Charge

1 RM

228.00

 

446

-1

TBSC-L.I-21

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.

 

1 RM

 

660.00

 

II

SUB-SECTION

DOOR SHUTTERS WITHOUT FRAMES

 

 

 

447

TBSC-L.II-01

Flush door shutters, solid bond wood block board type with teak ply on both faces.: 25 mm thick conforming to IS:2202

1 Sqm

1,731.00

 

448

TBSC-L.II-02

Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202

1 Sqm

1,817.00

 

449

TBSC-L.II-03

Flush door shutters, solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202

1 Sqm

1,984.00

 

450

TBSC-L.II-04

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 25 mm thick conforming to IS:2202

1 Sqm

987.00

 

451

TBSC-L.II-05

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mm thick conforming to IS:2202

1 Sqm

1,192.00

 

452

TBSC-L.II-06

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202

1 Sqm

1,349.00

 

453

TBSC-L.II-07

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 40 mm thick conforming to IS:2202

1 Sqm

1,528.00

 

454

TBSC-L.II-08

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 20 mm thick conforming to IS:2202

1 Sqm

1,901.00

 

455

TBSC-L.II-09

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 25 mm thick conforming to IS:2202

1 Sqm

1,848.00

 

456

TBSC-L.II-10

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 30 mm thick conforming to IS:2202

1 Sqm

2,046.00

 

457

TBSC-L.II-11

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202

1 Sqm

2,231.00

 

458

TBSC-L.II-12

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 40 mm thick conforming to IS:2202

1 Sqm

2550

 

459

TBSC-L.II-13

Supply and fixing of Cement Bonded Prelaminated Particle Board single door shutter using 16MM Cement Bonded Prelaminated Particle Board with all round section “U” size of mm thick galvanized pre-painted cold rolled steel profiles Cement Bonded Prelaminated Particle Board with necessary screws fixed at every 1’0” ( 304.8mm) intervals. The cost inclusive of MS Nickel coated 250mm long Aldrops 2 no’s , MS powder coated 250mm long tower bolt 1 no’s, 2no’s MS powder coated 125mm long grip handle, 1 no’s M.S.P.C. Door stopper. Including cost and conveyance of all materials at site labour charges etc., complete finished itemofwork.

1 Sqm

2,233.00

 

460

TBSC-L.II-14

Supply and fixing of Cement Bonded Prelaminated Particle Board double door shutter using 16MM Cement Bonded Prelaminated Particle Board with all round “U” section size of 20mm x 18mm x 20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with Cement Bonded Prelaminated Particle Board separating two shutter with 30mm x 20mm x 30mm stepped lipping with necessary screws fixed at every 1’0” (304.8mm) intervals. The cost inclusive of MS Nickel coated 250mm long Aldrops 2no’s, MS powder coated 125mm long grip handle, 2 no’s

M.S.P.C. Door stopper. Including cost and conveyance of all materials at site labourcharges etc., complete finished item ofwork.

1 Sqm

2,836.00

 

461

TBSC-L.II-15

Supply and fixing of Cement Bonded Prelaminated Particle Board door shutter made out of U sections of size 12x14x12 made from 0.6mm thick pps sections with 12MM Cement Bonded Prelaminated Particle Board with necessary screws fixed at every 1’.0”interwells. The hardware consists of 250mm long Aldrops – 2 Nos.150mm Handle- 1 No , 150 mm long ms powder coated tower bolt 1 no. nickel coated. The cost is inclusive of all incidentals, labour transportation charges.

1 Sqm

2,185.00

 

462

TBSC-L.II-16

Supply and fixing of Cement bonded Particle BOARD (conforming to IS 14862) door shutter with all-round style “U” lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder coatedcold rolled steel profiles with 16 mm thick Cement bonded Particle BOARD with necessary screws fixed at 1’-0” interval 250 mm long Aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts Including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work.

1 Sqm

1,503.00

 

463

TBSC-L.II-17

Supply and fixing of Cement bonded Particle BOARD (conforming to IS 14862) 12 mm thick door shutter of size 6’0” x 2’6” with all-round style “U” lipping size 15 x 14 x 15 mm made from

0.8 mm thick powder coated cold rolled steel profiles with necessary screws fixed at 1’-0” interval 250 mm long Aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts Including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work.

1 Sqm

1,287.00

 

464

TBSC-L.II-18

Supply and fixing door shutter with frame made out of PVC section and panels conforming to IS:10151-1982 having panel sizes of 100 mm x 30 mm with self extruded grooves at 40 mm x 50 mm grooves on front face and the infill panel dimension is 610 mm x 20 mm seamless hallow multi chambered PVC single panel for finished item of work.

1 Sqm

2,379.00

 

465

TBSC-L.II-19

Moulded panel solid core flush doors using water-resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick of Masonite or equivalent doors - 30 mm thick

1 Sqm

1,491.00

 

466

TBSC-L.II-20

Moulded panel solid core flush doors using water-resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick Masonite or equivalent doors - 35 mm thick

1 Sqm

1,630.00

 

467

TBSC-L.II-21

Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of different elegant shades doors - 30 mm thick

1 Sqm

1,211.00

 

468

TBSC-L.II-22

Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of different elegant shades doors - 35 mm thick

1 Sqm

1,341.00

 

469

TBSC-L.II-23

Providing and fixing 35mm thick FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelamcolours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of

Engineer-in-Charge, manufacture specification and drawing

1 Sqm

2,643.00

 

470

TBSC-L.II-24

Supply & Fixing SOLID STEEL DOOR shutter made out of G I Precoated Sheet with an average wall thickness of 0.35 mm on both sides. MS Tube having dimensions of 19 x 19 mm is inserted along the hinge side of the door, core of the door shutter filled with High Density Polyurethane foam injected with the help of hydraulic injection method, four sides ofthe door covered with G I Precoated Sheet and the hardware locations reinforced with suitable wooden blocks as per drawing and stickers indicating location of the hardware pasted at appropriate places,etccomplete

1 Sqm

1,349.00

 

471

TBSC-L.II-25

Providing of 35mm thick Factory made Prelaminated ABS (AcrolynitrileButadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides for each shutter and ISI make S.S round lock complete forfinished item ofwork

1 Sqm

6216.00

 

472

TBSC-L.II-26

Supply and fixing of Cement Bonded Prelaminated Particle Board door shutter conforming to IS-14276 made out of U sections of size 12 x 18 x 12 made from 0.6mm thick PPS sections with 16 mm Cement Bonded Prelaminated Particle Board with necessary screws fixed at every 1’.0”interwells. The hardware consists of 12 mm dia x 200mm long AluminiumAldrops – 2 Nos. 125 mm long Handle- 2 Nos. 3 mm x 12 mm x 180 mm long 304 SS hinges- 3 Nos with pole receiver of 10mm dia pole X40mm long welded on 2mm X40mm(ss304) plates works as receiver for RT patte hinges. The cost is inclusive of all incidentals,labourtransportationcharges.

1 Sqm

2,394.00

 

III

SUB-SECTION

DOORS WITH SHUTTERS & FRAMES

 

 

 

473

TBSC-L.III-01

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out ofM.S. tubes of 19 gauge thickness and size of 19mm x

1 Sqm

2153.00

 

474

TBSC-L.III-02

Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC

DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat mouldedPrelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mmshall  beflat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottomrail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specificationanddrawing.

1 Sqm

2460.00

 

222

475

TBSC-L.III-03

Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC

DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mmthick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick& 75mmwidesinglesideprelimPacsheetsshallbe for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specificationanddrawing.

1 Sqm

2,233.00

 

476

TBSC-L.III-04

MOULDED PVC DOOR – WOOD FREE  Providing

and fixing 30mm thick Brand factory made Moulded door shutter- wood free consisting of frame made out of MS. tubes 19gauge thickness and size of 25mmX25mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick High density EPS conforming to IS 4671- 1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or prelamcolours after routing to the moulded design on one side and 2mm plain and

/ or prelam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along Ms. Tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS Panel etc. Complete as per direction ofEngineer

– in-Charge, manufacture specification and drawing

1 Sqm

2,256.00

 

477

TBSC-L.III-05

Providing and fixing 30mm thick FACTORY MADE WIRE MESH SOLID PVC DOORSHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmX19mm for stiles and 15mm for top, lock & bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture.19mmX19mm

M.S. square tubes shall be covered with 5mm thick heat moulded “” PVC ‘C’ channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be flat and 15mm shall be bent in 900 on the inner side to from top and bottom rail land 130mm wide PVC sheet out of which 100mm shall be flat and 154mm shall be bent in 900 on both side to from lock rail, 10mm(5mmX2) thick, 20mmwide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be of G.I. wire mesh of 24gauge to be fitted in by ’C’ channel of size 35mm X10mm on the either side in the stiles. The inner side ‘C’ channel is fixed by 19mmX19mm MS. Tube on both sides with screws. The wire mesh in top bottom & lock rail is sealed with15mm X 15mm tube with G.I. wire 10mm(5mmX2) thick PVC strip of 25mm width is to be stuck& nails on both side of G.I. wire mesh interior at the top, bottom             &                                 lock           rail.                  An additional5mmthickPVCstripof20mmwidthis to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’sspecification&drawings

1 Sqm

2,005.00

 

478

TBSC-L.III-06

Providing and fixing door & shutter of which frame made from 1.2 mm powder coated cold rolled steel profiles of overall section size of 60 mm x 45 mm with 21 mm rebate for shutter with necessary stiffeners hinges and screws with Cement bonded Particle BOARD (IS 14862) shutter with all-round style “U” lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA powder coated steel profile with 16 mm thick Cement bonded Particle board with necessary screws fixed at every 1’-0” interval 250 mm long Aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts including cost and conveyance, one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved colour, labour charges etc.

1 Sqm

1,771.00

 

479

TBSC-L.III-07

Doors Frames (Colour Coated Steel Sections) & Shutter using Cement Bonded Particle Board as per IS 14276 (Cement Bonded Particle Board conforming to IS 14276 or equivalent ) : Providing and fixing of door frame made from cold roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U) form of 40kg/m3. Overall size of frame section should be of 50mm x50mm. With necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle board shutter (Cement Bonded Particle Board conforming to IS 14276 or equivalent ) “Single Leaf” with all round styles “U” section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board (Cement Bonded Particle Board conforming to IS 14276 or equivalent ) with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS nickel coated Aldrops of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all materials at site and applying one coat primer , one coat of luppam and two coats of synthetic enamel paint as per approved design for finished itemofwork

1 Sqm

3503.00

 

480

TBSC-L.III-08

Supplying and fixing of Unplasticised Poly Vinyl Chloride(UPVC)2Track–2Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of allmaterials,

1 Sqm

5697.00

 

481

TBSC-L.III-09

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track slidingdoors  with mesh shutter provision – (2-glassshutters)-95

-Series duly manufactured usingUPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mmx 60 mm) x 2.20 mm for outer frames, (75 mm x39 mm)/(66 mm x 42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass ofreputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of Patio/Bent espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished itemofwork.

1 Sqm

6409.00

 

482

TBSC-L.III-10

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter–                     (2-glass               shutters and 1- meshshutter)- 95 - Series duly manufactured using UPVC reinforced profiles(Composition

1 Sqm

7083.00

 

483

TBSC-L.III-11

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three track - three glass shutters sliding - 112 -Series duly manufactured using UPVC reinforced profiles of

112.0 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm x 2.25 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass ofreputed make and fixed with EPDM weathering seal resistant accessories likeclippinglocking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates                     for                              casement sizingcompleteforfinisheditemofwork

1 Sqm

6134.00

 

484

TBSC-L.III-12

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no’s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

1 Sqm

8029.00

 

485

TBSC-L.III-13

Supplying and fixing door shutter, with shutter frame and infill panel made from PVC material conforming to IS: 10151-1982, the shutter frame made out of PVC extruded sections having overall dimension of 47 mm x 33 mm with wall thickness of 1.2mm + 0.3mm with usual process variation, the shutter frame with tapered shape to provide better grip to the infill panel end to drain out the water The Infill panel is made out of PVC Sections having Overall Dimensions of 200 mm x 20 mm with wall thickness of 1mm + 0.2mm, the shutter frames mitre cut and joined at the corner, by providing Polymeric “ L” type corners to take hardware & fixtures fixed with 10-20mm counter sunk fully threaded parallel shank steel screws, all the hardware locations reinforced with special polymeric bars as per drawings, stickers showing locations of different hardware pasted on the shutter, the infill panels joined by tongue andgroovemethod.

1 Sqm

946.00

 

486

TBSC-L.III-14

Supply and fixing of door shutters made of rigid PVC extruded hollow section(Nandi or equivalent ) of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm X 79mm with the wall thickness of1.5mm

+/-0.15mm  section  mitre-cut  and  joined  at  4

1 Sqm

1753.00

 

487

TBSC-L.III-15

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side20 mm wide cross PVC sheet as gap insert fortop & bottom                              rail,                  panelling    of                                10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of                  Engineer–in–charge,                manufacturers specification.

1 Sqm

2762.00

 

488

TBSC-L.III-16

Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with shutter frame and Infill panel made from PVC material, the shutter frame made out of PVC extruded sections having overall dimensions of 6 0mm x 30 mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the shutter frame meter cut and joined at corners and all the hardware locations reinforced with special polymeric bars as per drawing including providing special PVC bracket on hinge side, etc complete

1 Sqm

2374.00

 

489

TBSC-L.III-17

Providing & fixing internal prelaminated PVC door frame of size 100 x 45 mm with a wall thickness of 5mm, made of extruded 5 mm Prelam PVC foam sheet, mitred cut at two corners and joined with two nos. of 150mm long brackets of 15 x 15 mm MS square tube, two vertical door profiles reinforced with 40 x 20 MS Tube of 19 gauge throughout the frame and the door frame fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners with a minimum of 3 nos of screws provided for each vertical member and two nos. for horizontal, etc completeasper drawing and direction of Engineer inCharge

1 RM

548.00

 

490

TBSC-L.III-18

Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steelas per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr  with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Ironsheetformedtosinglerebateprofileofsize

100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door  Shutters  are  with

0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear floatvision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, clean room applications

1 Sqm

11,166.00

 

491

TBSC-L.III-19

Providing & Fixing of Scientific Doors with metal door frames and door shutters made ofgalvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leafDoor

1 Sqm

10307.00

 

492

TBSC-L.III-20

Providing & Fixing of Scientific Doors with metal door frames and door shutters made ofgalvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leafDoor

1 Sqm

10,995.00

 

493

TBSC-L.III-21

Supply & Fixing of Stainless steel doors, frames& shutters made of stainless steel grade 304 of hairline finish, frame with 1.2mm thick formed to single rebate profile of size 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel Sheet formed to provide a46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, StainlessSteel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, cleanroomapplications

1 Sqm

20,934.00

 

494

TBSC-L.III-22

Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steelas per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr  with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of  size 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters arewith

0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, StainlessSteel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutesFire RateddoorconformingtoIS:3614(Part2)1992

1 Sqm

13,259.00

 

495

TBSC-L.III-23

Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steelas per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr  with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of  size 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters arewith

0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, StainlessSteel Ball Bearing Butt Hinges 3 mm thick fixedflush

1 Sqm

12,561.00

 

496

TBSC-L.III-23

Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of 304 grade hairline finish sheet formed to double rebate profile of size 143 mm X 58 mm with maximum bending radius of

1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, StainlessSteel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutesFire RateddoorconformingtoIS:3614(Part2)1992

1 Sqm

20,934.00

 

497

TBSC-L.III-24

Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of 304 grade hairline finish sheet formed to double rebate profile of size 143 mm X 58 mm with maximum bending radius of

1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, StainlessSteel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock withLeverHandles,

1 Sqm

18,252.00

 

498

TBSC-L.III-25

Supply & Fixing of Lead Lined Clean room doors frames and shutters made of Skin pass galvanized Iron sheet (Conform to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr).with powder coating of thickness 60-65 Microns, frame of 1.60mm thick galvanized steel sheet (Conform to IS 277) formed to Single/double rebate profile of size 100mm X 58mm/ 143x58mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick Galvanized Steel Sheet (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with a single

/ multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the lead sheets extend the full width and height of the door, Lead thickness is equal to the shielding in the adjacent wall, the door frames and door shutters are coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns, coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, hardware with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc complete for finished item

1 Sqm

15,031.00

 

499

TBSC-L.III-26

Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters made of Stainless steel grade of 304 hairline finish, frame with 1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to Single/double rebate profile of size 100 mm x 58mm/143x58mm,doorframeswithasingle/ multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of 304 formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with asingle

/ multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level. The lead sheets extend the full width and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall. Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc complete for finished item of work

1 Sqm

23,726.00

 

500

TBSC-L.III-27

Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long screw.The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 no's to be provided for each vertical member, GI stiffeners of ("U" channel of size 29x9x1mm, 150mm long) -3 no's at hinge point, Frame reinforcement of("U" GI channel of size 46x22x.06mm),Bottom tie rod of ("U" GI channel size of 15x15x1mm) etc. complete as per manufacturers specification for finished item of work. Maximum door framesize

:                             980                             x                              2070

including providing of 35mm thick Factory made Prelaminated ABS (AcrolynitrileButadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock completes for finished item of work. Maximumshuttersizeof:910x2030mm

1 Sqm

7643.00

 

501

TBSC-L.III-28

Supply and fixing of toilet door shutter with frame made of M.S. door frame of 5 mm x 48 mm x 48 mm (L angel) as all-round frame the frameis coated with one coat of red oxide and two coats of enamel of approved color. For shutter and the shutter is made with 16mm Bison lam shutter with all-round ‘U’ Lipping of PPS section of 12 mm x 18 mm x 12 mm x 0.60mm, along hardware of 200m long and 12mm diaaluminiumAldrops 2 Nos, 2Nos of 125m m handle, 3 Nos of RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of10mmDiax40mmbyweldedon3mmx40mm SS 304, plate it works as receiver for RT Patte hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of self expandable screws and caps

1 Sqm

3,427.00

 

502

TBSC-L.III-29

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three track - three glass shutters sliding duly manufactured using UPVC reinforced profiles of 108.0 mm x 49 mmx

2.25  mm  for  outer  frames,  85 mm  x 41  mmx

2.25 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with reinforced with 35mm x 10mm x 1.5mm thick with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and fixed with with uPVC glazing bead of 22.5mm x 18mm with “C”or“R”typeinnerandouterEPDMweathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizingcompleteforfinisheditemofwork

1 Sqm

8348.00

 

IV

SUB-SECTION

CUP-BOARD DOORS

 

 

 

503

TBSC-L.IV-01

Supply and fixing of cup board frames and shutters and using 16mm Cement Bonded Particle Board conforming to IS 14276 duly painted both sides with one coat of primer and two coats of synthetic / enamel paint of approved shade and brand including fixing of hardware like M.S. powder coated Piano hinges of size 18mm x 18mm, brass ball catches, Aluminium tower bolts and handles , Godrej locks, synthetic glue, screws and nails including cost and conveyance of all materials, labour charges, all incidental and operational charges etc., complete for finished item of work at siteas

1 Sqm

2,142.00

 

504

TBSC-L.IV-02

Supply and fixing of box type cup board using Cement Bonded Particle Board conforming to IS 14276 for making frame of size 100mm x 35mm using two sandwiched 16MM boards, one Cement Bonded Particle Board conforming to IS 14276 and one Cement Bonded Prelaminated Particle Board with plain 35mm wood lipping. The Shutters are made of 16MM thick Cement Bonded Prelaminated Particle Board (Pre- Laminated Cement Bonded Particle Board) of approved shade inclusive of hardware like M.S. powder coated Piano hinges of size ¾” x ¾” , Aluminium powder coated handles of size 4” (101.6mm), Aluminium tower bolt 4”(101.6mm) Godrej locks, screws, wood lipping and synthetic glueetc.,completefinishitemofwork.

1 Sqm

3,520.00

 

505

TBSC-L.IV-03

Supply and fixing of PVC cupboards for kitchen and bedrooms shall be made out of multi chambered PVC sections having overall dimensions of 20 X 762mm with a wall thickness of 1.2mm ± 0.3mm. The cabinets shall be madeas per the requirements of the room with groove system. The PVC section surface shall be plain and laminated finish to have good look, completed, for finished item of work for SINTEX OR equivalent PVCCABINETS

1 Sqm

3,954.00

 

506

TBSC-L.IV-04

Supply and fixing of cupboard shutter using teakwood scantling of size 50 mm x 50 mm teakwood as outer frame and 50 mm x 30 mm of size teakwood for shutter frames, 8mm thick Bison Lam as panel to each shutter consist of 2 Nos 75mm long tower bolt – 2 nos 75 mm big handle the and other shutter will have 1 no of cupboard lack , 1 No of 75 mm long handle and 75 mm x 10mm x 1mm thick SS hinges- 2 Nos for each shutter. The above frame will be fixed tothe wall with screws, the rate inclusive of screws, handle, etc., completeat site of work

1 Sqm

3,948.00

 

M

SECTION

WINDOWS

 

 

 

 

 

(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking)

 

 

 

I

SUB-SECTION

OPENABLE WINDOWS

 

 

 

507

TBSC-M.I-01

Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of-

0.58 mm thick 'D quality, galvanized as per IS 277,finishpaintedwithapolyesterpaint,section  for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25mmpanelled

1 Sqm

6332.00

 

508

TBSC-M.I-02

Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of -

0.58 mm thick 'D quality, galvanized as per IS 277,finishpaintedwithapolyesterpaint,section  for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard bars @ 150 mm pitch for Windows: Double shutter with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2x1219.2mm)

1 Sqm

6,697.00

 

509

TBSC-M.I-03

Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of -

0.58 mm thick 'D quality, galvanized as per IS

277,finishpaintedwithapolyesterpaint,section  for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard bars @ 150 mm pitch for Windows: Double shutter 4'-0 x 4 '-0 (1219.2x12.19.2mm) without Mullionsection

1 Sqm

6513.00

 

510

TBSC-M.I-04

Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of -

0.58 mm thick 'D quality, galvanized as per IS 277,finishpaintedwithapolyesterpaint,section  for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard bars @ 150 mm pitch for Windows: Double shutter with Mullion section for sizes 4'-6 x 4 '-6 (1371.6x1371.6mm)                  5'-0             x             4'-

0(1524x1219.2mm)             and          6'-0          x          4'-

0

1 Sqm

5,967.00

 

511

TBSC-M.I-05

Providing and fixing of Casement/ Open able Windows made of pre-painted steel as per IS513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mmprovision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws,Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete Single shutter Window withoutvertical mullion for size 2’0”x4’0” (609.6mm x1219.2mm)

1 Sqm

5,784.00

 

512

TBSC-M.I-06

Providing and fixing of Casement/ Open able Windows made of pre-painted steel as per IS513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mmprovision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws,Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete Double shutter Window with vertical mullion for sizes 3’0” x 4’0” (914.4mm x 1219.2mm) and 4’0” x 4’0” (1219.2mm x1219.2mm)

1 Sqm

6,149.00

 

513

TBSC-M.I-07

Providing and fixing of Casement/ Open able Windows made of pre-painted steel as per IS513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mmprovision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws,Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete Centre fixed both side open able shutter window for sizes 5’0”x4’0” (1524mm x1219.2mm)                                                       and                           6’0”x4’0” (1828.8mmx1219.2mm)

1 Sqm

5,418.00

 

514

TBSC-M.I-08

Providing & Fixing of Open able Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with apolyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Squareguard bars with 6” (152.4mm) pitch , complete for Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm)

1 Sqm

7670.00

 

515

TBSC-M.I-09

Providing & Fixing of Open able Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with apolyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubbergaskets

1 Sqm

8,036.00

 

516

TBSC-M.I-10

Providing & Fixing of Open able Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with apolyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Squareguard bars with 6” (152.4mm) pitch , complete for Centre fixed both side open able shutter window forasize5’0”x4’0”(1524mmx1219.2mm).

1 Sqm

7,306.00

 

517

TBSC-M.I-11

Providing & Fixing of Open able Windows with Fly-mesh made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with apolyester paint and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Squareguard bars with 6” (152.4mm) pitch , complete for a size6’0”x4’0”(1828.8mmx1219.2mm)

1 Sqm

6,393.00

 

518

TBSC-M.I-12

Providing & Fixing of Mesh windows made of pre-painted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 primer coated with epoxy primer finish painted with a polyester paint, section for outer frame of 47 x 36 mm, centre mullion of 60 x 36 mm, section mesh beading 18 x 6 mm and Fly mesh shutter section of 20 x 40 mm, the sections cut to length meter joined with corner bracket and centre mullions fixed with mullion cap, handles, latch, 2 Nos of heavy duty stainless steel pivothingesper

S.S. Mesh for fly mesh shutter (304 grade) including fixing the frames in the concrete/masonry wall by means of self expanding screws complete for finished item of work.

1 Sqm

4,777.00

 

519

TBSC-M.I-13

Providing and fixing of Open able / Casement Windows made of pre-painted steel as per IS513 of 0.80 mm thick galvanized as per IS 277 finish painted with a polyester paint and section for outer frame of 80 x 45 mm, centre mullion of 80

x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for Single open able shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm)

1 Sqm

5100.00

 

520

TBSC-M.I-14

Providing and fixing of Open able / Casement Windows made of pre-painted steel as per IS513 of 0.80 mm thick galvanized as per IS 277 finish painted with a polyester paint and section for outer frame of 80 x 45 mm, centre mullion of 80

x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for Double open able shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) and 4’0” x 4’0”

1 Sqm

5,422.00

 

521

TBSC-M.I-15

Providing and fixing of Open able / Casement Windows made of pre-painted steel as per IS513 of 0.80 mm thick galvanized as per IS 277 finish painted with a polyester paint and section for outer frame of 80 x 45 mm, centre mullion of 80

x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for 5’0 x 4’0 ( 1524 x 1219.2mm) and 6’0 x4’0 ( 1829.6 x

1219.2mm)

1 Sqm

4,777.00

 

522

TBSC-M.I-16

Providing and fixing of Open able / Casement Windows with fly mesh madeofpre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the sections, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., completefor2’0”x4’0”(609.6x1219.2mm)

1 Sqm

6,765.00

 

523

TBSC-M.I-17

Providing and fixing of Open able / Casement Windows with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the sections, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for 3’ 0” x 4’ 0” (914.4mmx

1219.2mm) and 4’0” x 4’0” (1219.2mmx

1219.2mm)

1 Sqm

7,086.00

 

524

TBSC-M.I-18

Providing and fixing of Open able / Casement Windows with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the sections, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for 5’0 x 4’0 ( 1524 x 1219.2mm) and 6’0 x4’0 ( 1829.6x1219.2mm)

1 Sqm

6,443.00

 

525

TBSC-M.I-19

Galvanized powder coated Casement Windows with open able shutters duly manufacturedusing pressedsteelsectionsinmildsteelconformingto IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter ofsize

24   mm   and   10x10   mm   square   guard bars

1 Sqm

5,698.00

 

526

TBSC-M.I-20

Galvanized powder coated Casement Windows with open able shutters duly manufacturedusing pressedsteelsectionsinmildsteelconformingto IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter ofsize

24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3 of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12mmsizewith0.8mmthickpowdercoated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self expanding screws, complete for finished item of work including of all taxes - 1530 x 1372 orabovesize

1 Sqm

5,105.00

 

527

TBSC-M.I-21

Galvanized powder coated Casement Windows with open able shutters duly manufacturedusing pressedsteelsectionsinmildsteelconformingto IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3 of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to theconcrete/masonry wall with self expanding screws, complete for finished item of work including of all taxes -1220 x 1372 orbelowsize

1 Sqm

7,160.00

 

528

TBSC-M.I-22

Galvanized powder coated Casement Windows with open able shutters duly manufacturedusing pressedsteelsectionsinmildsteelconformingto IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3 of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to theconcrete/masonry wall with self expanding screws, complete for finished item of work including of all taxes -1530 x 1372 orabovesize

1 Sqm

6,582.00

 

529

TBSC-M.I-23

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows open able shutters duly manufactured using UPVC reinforcedprofilesof(48mmx60mm)/(58mm x 60 mm) x 2.0 mm for outer frames, (64 mm x 60 mm)/(72 mm x 60mm) x 2.0 mm for mullion sections for two or more open able shutters and (78 mm x 60 mm)/(72 mm x 42 mm) x 2.0 mm for outward open able shutter frame or (70 mmx 60 mm)/ (72 mmx 42 mm) x 2.0 mm for inward open able shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, locking system suitably concealed 1 No., per sash provided with raiser wedges forsmooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizingcompleteforfinisheditemofwork

1 Sqm

5,896.00

 

530

TBSC-M.I-24

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections for two or more openable shutters 75 mm x 60 mm x 2.40 mm foropenable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC and accessories for casement window – friction hinges of stainless steel grade 304/430- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners,

1 Sqm

7,067.00

 

531

TBSC-M.I-25

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for outer frames, 82 mm x 60 mm x 2.60 mm for Fix mullion (“T” or “Z” )made of 60mm x 82mm uPVC profile section with steel reinforcement of size 35mm x 28mm x 1.5mm shall be provided in windows having fixed panel as per the requirement. The shutter of outward open able window shall be made of size 60mm x 77mm or for inward open able window shall be made of size 60mm x 78mm; “T” shaped for outward open or “Z” shaped for Inward open extruded 3 box multi-chamber uPVC window profile section of white colour having outer wall thickness of 2.6mm (± 0.2mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and accessories for casement window – friction hinges of stainless steel grade 304- 2 Nos., per sash, handle 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance ofallmaterials,

1 Sqm

7,272.00

 

 

 

Supply and fixing of Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS with Pre-Painted Steel Sections fabricated from pre-painted Cold rolled formed sections made of galvanized steel color coated sections {Base steel as per 15-512 quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with total coated thickness of 0.58mm primer coated with epoxy primer of 5-7 microns thick, finish painted with polyesterpaint of 12-16 microns and back coated with alkyd backer of 5-7 microns), the sections for outer frame and centre mullion (duly filled with PU form of 40 kg/Cum) should be of 60mm x 50mm, with provision for fixing glazed shutter. The section for glazed/paneled shutter should be of size 48mm x 25 mm and another section of size 60mm x 23mm should be provided for separating glazed and paneled portion 5 mm thick colour pin headed glass is to be provided for glazing and providing guard bars of 10mm square rods duly welded at 150mm pitch to MS flat section of size 18mm and 3mm thick. Windows are to be fixed to wall by means of self expansion nylon Cap (75) and electroplated wooden screws of size 100mm, including aluminum powder coated fittings, A) 75mm long grip handles 1 no per shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy duty 55 Pivot hinges 2 nos per shutter, D) MS Powder coatedtelescopicstay1nopershutter.

 

 

 

532

TBSC-M.I-26

Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS WITHPPS

SECTIONS — Single shutter 2'0"x4'0" outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm

1 Sqm

7,272.00

 

533

TBSC-M.I-27

Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS WITHPPS

SECTIONS —Double shutter 3'0" x 4'0" outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm mullion section size of 50mm x 60mm for outer frame

1 Sqm

7,272.00

 

534

TBSC-M.I-28

Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS WITHPPS

SECTIONS — Double shutter 3'0" x 3'0" outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of 50mm x 60mm for outer frame.

1 Sqm

7,272.00

 

535

TBSC-M.I-29

Pre Laminated Cement Bonded Particle Board (as per IS-14276) WINDOWS WITHPPS

SECTIONS — Double shutter 4'0"x4'0" outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of 50mm x 60mm for outer frame.

1 Sqm

7,272.00

 

II

SUB-SECTION

SLIDING WINDOWS

 

 

 

536

TBSC-M.II-01

Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coatedthicknessof

0.58 mm. Primer coat with epoxy primer of 5–7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro groove should be 25 x 24mm( Aluminium/Plastic)and Lap Strip should be of 30 x 41mm(Aluminium/Plastic).shutter should be provided with a glass of 5mm Plain Float Glass. Corner bracket for External frame made of Steel/Polypropylene, Corner Bracket for Internal frame made of Steel/Polypropylene, Touch Lock, Rollers, wool pile for lap strip & euro groove, Bump Stop Base & Rubber for shutter stopper. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. The Frame Section should be cut to length and mitre joined with Corner brackets & Shutter Sections should be cut to length and mitre joined with Corner Bracket. Window Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.10mm square guard bars with 6” pitch (152.4mm) max to be fixed wall to wall and all taxes complete for finished itemofwork

1 Sqm

6,799.00

 

537

TBSC-M.II-02

Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 with powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks without grill provision is of 75 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. pereachshutterincludinginstallationofwindow system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive      of                          conveyance                 of      all      materials accessories, labour charges, and erection at site with complete finished item of work for Window withTwoSlidingShuttersandwithoutGrill

1 Sqm

5,315.00

 

538

TBSC-M.II-03

Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 with powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. pereachshutterincludinginstallationofwindow system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive      of                          conveyance                 of      all      materials accessories, labour charges, and erection at site with complete finished item of work for Window withTwoSlidingShuttersandwithGrill

1 Sqm

5,894.00

 

539

TBSC-M.II-04

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder andthickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for i) Centre Shutter Fixed: centre shutter frame made of section with size 20mm x 47mm should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mm of 0.58mm thick fixed horizontally on top and bottom of the shutterframe.

1 Sqm

6,226.00

 

540

TBSC-M.II-05

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder andthickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for ii) Centre Shutter Sliding: centreshutter frame made of section of size 20mm x 47mm should                                                      befittedwith

5mmthickp lain float glass of reputedmake.The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed horizontally at top and bottom of shutter frame and slides along the bottom and top              guide tracks                made         of                  sections size24mmx20mmof0.58mmthickand29mmx 20mm of 0.58mm thick and iii) Centre Flymesh

1 Sqm

6,818.00

 

541

TBSC-M.II-06

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder andthickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for Window with 3 shutters (Centre fixed shutter/Centreslidingshutter/centreFlymesh shutter) and without Grill Window made of Outer Frame of size 90mm x 50mm. i) Centre Shutter Fixed: centre shutter frame made of section with size 20mm x 47mm of 0.58mmthick should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mmof 0.58mm thick fixed horizontally on top and bottom of theshutterframe.

1 Sqm

5,584.00

 

542

TBSC-M.II-07

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder andthickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using

1 Sqm

6,110.00

 

543

TBSC-M.II-08

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder andthickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for Window with 3 shutters (Centre fixed shutter/Centreslidingshutter/centreFlymesh shutter) and without Grill Window made of Outer Frame of size 90mm x 50mm. iii) Centre Fly mesh Shutter Sliding: Section for Fly mesh shutter frame should be of size 20mm x 40mm and fitted with SS mesh (304 Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm thick and 29mm x 20mm of0.58mmthick.

1 Sqm

6,110.00

 

544

TBSC-M.II-09

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

1 Sqm

6,407.00

 

545

TBSC-M.II-10

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision – (only 2-glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.20mmforouterframes,(54mmx38mm)/(39

mm x 58 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete forfinished item of work

1 Sqm

6,010.00

 

546

TBSC-M.II-11

SupplyingandfixingofUnplasticisedPolyVinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glassshutters  and  1-  mesh shutter) duly manufactured using UPVC reinforcedprofiles(Compositionofprofileshall consists a minimum of 5.5 PHR of TiO2 andnot morethan12PHRofCaCo3forevery100parts ofPVCresin)of(94mmx45mm)/(80mmx52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced withhot dip galvanized up to 50 microns of minimum thicknessof1.0/1.2mmprefabricated&welded through fusion welding. The window sashshall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm)/(52mmx21.5mm)x2.0mm fittedwithVinylCoatedFibremesh-onrollers/ pulleydulyfixedwithGreycolourTPVGasketfor sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single pointlockingwithTouchLockandthesystemis tobeinstalledatthesiteusinganchorfasteners, siliconrubbersealant,easyglazing/deglazingat site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished itemofwork.

1 Sqm

6,690.00

 

547

TBSC-M.II-12

DELETED

 

 

 

548

TBSC-M.II-13

Providing and Fixing Pre painted Steel Sliding Windows / Doors - 3 track sliding window

/doors shutter with mesh shutter – (2 - glass shutters and 1 - mesh shutter) fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted witha polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Section for external frame should be of 44 x 107mm .Section for glass shutter and mesh shutter in case of door should be of 35 x 67 mm Section for euro groove should be 25 x 31mm (Aluminium/ Plastic) (in case of window sections should be 35 x 49 mm and 25 x 24 mm and 30 x 41 mm) and Lap Strip should be of 39 x 41mm (30 x 41 mm & Touch lock for window ) (Aluminium/ Plastic. The doors/ windows should be panelled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon.Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding brackets & screws including 10mm square guard bars with 6” pitch (152.4mm) (in case of windows only) and all Taxescompleteforfinisheditemofwork.

1 Sqm

7,518.00

 

549

TBSC-M.II-14

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows duly manufactured using UPVC reinforced profiles of 60 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30 mm 15 mm x 1.5 mm with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site completeforfinisheditemofwork.

1 Sqm

6,590.00

 

550

TBSC-M.II-15

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles  of  91 mm x 49  mm  x

2.20  mm  for  outer  frames,  62 mm  x 41  mmx

2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforcedwith30mm15mmx1.5mmwithhot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site completeforfinisheditemofwork.

1 Sqm

7,628.00

 

III

SUB-SECTION

VENTILLATORS

 

 

 

551

TBSC-M.III-01

Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete

/masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm and (ii) Ventilators: Top Hung 4 '-0 x 2'-0 (1219.2x609.6mm) outerframe section size of 46 x 52 m shutter frame section sizeof46x46mmMullionsectionsizeof46x70 mm and (iii) Ventilators: Top Hung 4 '-0 x 3'-0 (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mmMullionsectionsizeof46x70mm

1 Sqm

6,942.00

 

552

TBSC-M.III-02

Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to theconcrete

/masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2x

914.4 mm) (Box section) outer frame section sizeof33x56mmMullionsectionsizeof33x56 mm

1 Sqm

4,749.00

 

553

TBSC-M.III-03

Providing and fixing of top hung Ventilators made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with a polyester paint with 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item ofworkfor

(i) Single open able ventilator shutter size of 2’0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section sizeof

52 x 25mm thick and (ii) Double open able ventilator shutter Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm and

(iii) Double open able fix shutter size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer framesection size of 80 x 45mm , shutter frame section size of 52 x 25 mm ,Vertical mullion section size of 80 x 60mm

1 Sqm

6,118.00

 

554

TBSC-M.III-04

Providing and fixing of louvered Ventilators made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with a polyester paint with and fitted with 4 mm thick plain float glass including fixing the frames in concrete/masonry wall by means of self expanding screws, etc., complete for finished item of work for (i) Single fixed Louvers

1 Sqm

4,189.00

 

555

TBSC-M.III-05

Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work for (i) Single open able ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 100 x 45mm, Glazed and fly mesh shutter frame section size of 52 x 25mm thick and (ii) Double open able ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm, Glazed and fly mesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mmand

(iii) Double open able fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame section size 100 x 45mm , Glazed and fly mesh shutter frame section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm

1 Sqm

7,570.00

 

556

TBSC-M.III-06

Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the framesin

1 Sqm

5,100.00

 

557

TBSC-M.III-07

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outerframe having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x

2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

1 Sqm

6,020.00

 

558

TBSC-M.III-08

Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be co- extruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x 2.40 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator

1 Sqm

8,470.00

 

N

SECTION

STRUCTURAL GLAZING & CURTAIN WALLING

 

 

 

 

 

(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking)

 

 

 

I

SUB-SECTION

FIXED GLAZING

 

 

 

559

TBSC-N.I-01

Supplying and fixing of curtain Glazing made of pre painted steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 Primer coated with epoxy, finish painted with a polyester paint using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and sectionfor beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with EPDM gaskets including handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing the frames in theconcrete

/ masonry wall with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-0 x 2'-0 (609.6x609.6mm) and Fixed Glazing 2'-0 x 3'-0 (609.6x914.4mm)

1 Sqm

6,027.00

 

560

TBSC-N.I-02

Supplying and fixing of curtain Glazing made of pre painted steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 Primer coated with epoxy, finish painted with a polyester paint using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and sectionfor beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with EPDM gaskets including handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing the frames in theconcrete

/ masonry wall with self expanding screws, etc., complete for finished item.- Fixed Glazing 3'-0 x 3'-0 (914.4x914.4mm) and Fixed Glazing 3'-0 x 4'-0 (914.4x1219.2mm)

1 Sqm

5,114.00

 

561

TBSC-N.I-03

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 48 series duly manufactured using UPVC reinforced profiles of 60 mm x 48 mm x 2.25 mm for outer frames and the mullion sections are of 60 mm x 76 mm x

2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make  duly fixed with EPDM weathering seal resistant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item ofwork

1 Sqm

2953.00

 

562

TBSC-N.I-04

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.25 mm for outer frames and the mullion sections are of 60 mm x 70 mm x

2.25 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make  duly fixed with EPDM weathering seal resistant including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item ofwork

1 Sqm

3,529.00

 

563

TBSC-N.I-05

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass ofreputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item ofwork

1 Sqm

4,425.00

 

II

SUB-SECTION

STRUCTURAL GLAZING

 

 

 

564

TBSC-N.II-01

Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanized steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer, finish painted witha

1 Sqm

7,306.00

 

565

TBSC-N.II-02

Providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 and the glass holding section made of 304 grade stainless steel of 0.58 mm thick, duly providing stiffeners inside the colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer and powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mmx

0.58 mm, shutter sections of 57 mm x 33 mm x

0.72 mm, stiffener sections of 55 mm x 31 mm x 1mm, hinges – 2 Nos for each shutter and aluminium Stays – 2 Nos. for each shutter, aluminium Handle – 1 no. for each shutter including cost and conveyance of all materials to site, all labour charges, incidental charges, costof all consumables etc. and fixing charges etc excluding scaffolding complete for finished item ofwork

1 Sqm

5,904.00

 

III

SUB-SECTION

CURTAIN WALLING

 

 

 

566

TBSC-N.III-01

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Curtain Walling systems duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.5 mm for outer frames, 60 mm x 70 mm x 2.5 mm for casement shutter frames and the mullion sections are of 60 mm x 70 mm x 2.5 mm or 60 mm x 62 mm x 2.5 mmfor sliding shutter outer frames and 77 mm x 38 mm x 2.5 mm for sliding shutter frames structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation for sliding window - clipping locking system 1 No. made of aluminium including cost and conveyance of all materials, accessories, labour charges for transportation, erection atsite with templates for casement sizingexcluding scaffoldingcompleteforfinisheditemofwork

1 Sqm

6,290.00

 

P

SECTION

FIXTURES FOR DOORS & WINDOWS

 

 

 

 

 

(Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking)

 

 

 

I

SUB-SECTION

TOWER BOLTS

 

 

 

567

TBSC-P.I-01

Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long

Each

161.00

 

568

TBSC-P.I-02

Brass Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Each

236.00

 

569

TBSC-P.I-03

Brass Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

Each

315.00

 

570

TBSC-P.I-04

Brass Tower Bolt-10 mm Bolt (IS:204) 250 mm Long

Each

391.00

 

571

TBSC-P.I-05

Brass Tower Bolt-10 mm Bolt (IS:204) 300 mm Long

Each

481.00

 

572

TBSC-P.I-06

Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long

Each

44.00

 

573

TBSC-P.I-07

Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm Long

Each

52.00

 

574

TBSC-P.I-08

Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Each

66.00

 

575

TBSC-P.I-09

Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

Each

79.00

 

576

TBSC-P.I-10

Aluminium Tower Bolt-10 mm Bolt (IS:204) 250 mm Long

Each

96.00

 

577

TBSC-P.I-11

Aluminium Tower Bolt-10 mm Bolt (IS:204) 300 mm Long

Each

109.00

 

578

TBSC-P.I-12

Aluminium Tower Bolt-10 mm Bolt (IS:204) 350 mm Long

Each

288.00

 

579

TBSC-P.I-13

Aluminium Tower Bolt-10 mm Bolt (IS:204) 450 mm Long

Each

376.00

 

580

TBSC-P.I-14

MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Long

Each

24.00

 

581

TBSC-P.I-15

MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Each

35.00

 

582

TBSC-P.I-16

MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

Each

52.00

 

583

TBSC-P.I-17

MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 250 mm Long

Each

68.00

 

584

TBSC-P.I-18

MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 300 mm Long

Each

85.00

 

585

TBSC-P.I-19

Stainless        Steel       Tower       Bolt-10       mm 8 (IS:15833)75mmLong                                                    4

Each

84.00

 

586

TBSC-P.I-20

Stainless        Steel       Tower       Bolt-10       mm 9 (IS:15833)100 mmLong                                                8

Each

98.00

 

587

TBSC-P.I-21

Stainless        Steel       Tower       Bolt-10       mm 1 (IS:15833)150 mmLong                                                4

Each

147.00

 

588

TBSC-P.I-22

Stainless        Steel       Tower       Bolt-10       mm 1 (IS:15833)200 mmLong                                                9

Each

196.00

 

589

TBSC-P.I-23

Stainless        Steel       Tower       Bolt-10       mm 2 (IS:15833)250 mmLong                                                4

Each

245.00

 

590

TBSC-P.I-24

Stainless        Steel       Tower       Bolt-10       mm 2 (IS:15833)300 mmLong                                                9

Each

293.00

 

II

SUB-SECTION

HINGES

 

 

 

591

TBSC-P.II-01

Brass Butt hinges (IS:205)- 75 mm Long

Each

66.00

 

592

TBSC-P.II-02

Brass Butt hinges (IS:205)- 100 mm Long

Each

218.00

 

593

TBSC-P.II-03

Brass Butt hinges (IS:205)- 125 mm Long

Each

264.00

 

594

TBSC-P.II-04

Brass Butt hinges (IS:205)- 150 mm Long

Each

348.00

 

595

TBSC-P.II-05

Aluminium Butt hinges (IS:205)- 75 mm Long

Each

49.00

 

596

TBSC-P.II-06

Aluminium Butt hinges (IS:205)- 100 mm Long

Each

64.00

 

597

TBSC-P.II-07

Aluminium Butt hinges (IS:205)- 125 mm Long

Each

77.00

 

598

TBSC-P.II-08

Aluminium Butt hinges (IS:205)- 150 mm Long

Each

93.00

 

599

TBSC-P.II-09

MS-Powder Coated Butt hinges (IS:205)- 75 mm Long

Each

11.00

 

600

TBSC-P.II-10

MS-Powder Coated Butt hinges (IS:205)- 100 mmLong

Each

21.00

 

601

TBSC-P.II-11

MS-Powder Coated Butt hinges (IS:205)- 125 mmLong

Each

31.00

 

602

TBSC-P.II-12

MS-Powder Coated Butt hinges (IS:205)- 150 mmLong

Each

40.00

 

603

TBSC-P.II-13

Deluxe window stay Aluminium

Each

131.00

 

604

TBSC-P.II-14

Brass Windows Stay

Each

203.00

 

605

TBSC-P.II-15

GI Powder Coated Friction stay hinges of 10" Long for windows

Each

213.00

 

606

TBSC-P.II-16

Continuous Piano Hinges Powder coated Mild steel as per IS-3818 : 1992 of nominal size 25 mm (B) of thickness 0.8 to 1.0 mm

1 RM

32.00

 

607

TBSC-P.II-17

Box hinges for cup boards

1 Each

41.00

 

608

TBSC-P.II-18

GI Powder Coated Friction stay hinges of 14" Long for windows

1 Each

300.00

 

609

TBSC-P.II-19

Stainless Steel Butt hinges (IS:12817)- 75 mm Long

Each

63.00

 

610

TBSC-P.II-20

Stainless Steel Butt hinges (IS:12817)- 100 mm Long

Each

93.00

 

611

TBSC-P.II-21

Stainless Steel Butt hinges (IS:12817)- 125 mm Long

Each

119.00

 

612

TBSC-P.II-22

Stainless Steel Butt hinges (IS:12817)- 150 mm Long

Each

148.00

 

III

SUB-SECTION

DOOR HANDLES

 

 

 

613

TBSC-P.III-01

Aluminium Door Handles (IS:208) 75 mm Long

Each

44.00

 

614

TBSC-P.III-02

Aluminium Door Handles (IS:208) 100 mm Long

Each

52.00

 

615

TBSC-P.III-03

Aluminium Door Handles (IS:208) 125 mm Long

Each

74.00

 

616

TBSC-P.III-04

Aluminium Door Handles (IS:208) 150 mm Long

Each

87.00

 

617

TBSC-P.III-05

MS-Powder Coated Door Handles (IS:208) 125 mm Long

Each

31.00

 

618

TBSC-P.III-06

MS-Powder Coated Door Handles (IS:208) 150 mm Long

Each

45.00

 

619

TBSC-P.III-07

Brass fancy handles 150 mm

Each

304.00

 

620

TBSC-P.III-08

Brass fancy handles 200 mm

Each

412.00

 

621

TBSC-P.III-09

Brass fancy handles 250 mm

Each

743.00

 

622

TBSC-P.III-10

Brass fancy handles 300 mm

Each

948.00

 

623

TBSC-P.III-11

Brass fancy handles 450 mm

Each

1,483.00

 

624

TBSC-P.III-12

Keyless lockset for toilet doors with CP or PC knob handles (complete set)

Each

316.00

 

625

TBSC-P.III-13

Keyless lock set for toilet doors with brass knob handles

Each

836.00

 

626

TBSC-P.III-14

Hard Nylon Window Handle

Each

64.00

 

627

TBSC-P.III-15

Stainless Steel Door Handles 100 mm Long

Each

96.00

 

628

TBSC-P.III-16

Stainless Steel Door Handles 125 mm Long

Each

114.00

 

629

TBSC-P.III-17

Stainless Steel Door Handles 150 mm Long

Each

140.00

 

630

TBSC-P.III-18

Stainless Steel Door Handles 200 mm Long

Each

157.00

 

IV

SUB-SECTION

ALDROPS

 

 

 

631

TBSC-P.IV-01

Brass Aldrops (IS:2681) 300 mm long

Each

1,164.00

 

632

TBSC-P.IV-02

Brass Aldrops (IS:2681) 350 mm long

Each

2,243.00

 

633

TBSC-P.IV-03

Brass Aldrops (IS:2681) 450 mm long

Each

3,194.00

 

634

TBSC-P.IV-04

AluminiumAldrops (IS:2681) 200 mm long

Each

166.00

 

635

TBSC-P.IV-05

AluminiumAldrops (IS:2681) 250 mm long

Each

192.00

 

636

TBSC-P.IV-06

AluminiumAldrops (IS:2681) 300 mm long

Each

210.00

 

637

TBSC-P.IV-07

MS-Powder Coated Aldrops (IS:2681) 200 mm long

Each

105.00

 

638

TBSC-P.IV-08

MS-Powder Coated Aldrops (IS:2681) 250 mm long

Each

137.00

 

639

TBSC-P.IV-09

MS-Powder Coated Aldrops (IS:2681) 300 mm long

Each

164.00

 

640

TBSC-P.IV-10

Stainless Steel Aldrops (IS:15834) 200 mm long

Each

236.00

 

641

TBSC-P.IV-11

Stainless Steel Aldrops (IS:15834) 250 mm long

Each

279.00

 

642

TBSC-P.IV-12

Stainless Steel Aldrops (IS:15834) 300 mm long

Each

306.00

 

V

SUB-SECTION

LATCHES

 

 

 

643

TBSC-P.V-01

Brass latch heavy 300 mm

Each

584.00

 

644

TBSC-P.V-02

Brass latch heavy 350 mm

Each

672.00

 

645

TBSC-P.V-03

Brass latch heavy 450 mm

Each

886.00

 

646

TBSC-P.V-04

Aluminium Flat Latches: 200 mm long

Each

96.00

 

647

TBSC-P.V-05

Aluminium Flat Latches: 250 mm long

Each

105.00

 

648

TBSC-P.V-06

Aluminium Flat Latches: 300 mm long

Each

114.00

 

649

TBSC-P.V-07

MS-Powder Coated Flat Latches: 250 mm long

Each

53.00

 

650

TBSC-P.V-08

MS-Powder Coated Flat Latches: 300 mm long

Each

66.00

 

VI

SUB-SECTION

DOOR CLOSURES

 

 

 

651

TBSC-P.VI-01

Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment, with necessary accessories and screws etc. complete

Each

944.00

 

652

TBSC-P.VI-02

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-1: for width of doors up to 700 mm)

Each

1,091.00

 

653

TBSC-P.VI-03

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-2: for width of doors 701 to 850 mm)

Each

1,168.00

 

654

TBSC-P.VI-04

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete(Type-3:forwidthofdoors851to

1000mm)

Each

1,226.00

 

VII

SUB-SECTION

FLOOR SPRINGS

 

 

 

655

TBSC-P.VII-01

Double action Stainless steel cover plate and cast body iron floor spring (IS 6315- Table-1)

Each

1,734.00

 

656

TBSC-P.VII-02

Double action Brass cover plate and cast brass body floor spring (IS 6315- Table-1)

Each

4,114.00

 

657

TBSC-P.VII-03

Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table 1) for doors including cost of cutting floors as required, embedding in floors and S.S./ Brass cover plates withbrasspivotandsinglepieceM.S.Sheetouter box with slide plate etc. complete (door weight capacity up to130Kgs)

Each

3,452.00

 

658

TBSC-P.VII-04

Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table 1) for doors including cost of cutting floors as required, embedding in floors and S.S. cover plates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete (door weight capacity up to 80 Kgs)

Each

2,567.00

 

659

TBSC-P.VII-05

Providing of brass cast body Floor Spring IS: 6315 sleek in size with the S.S. / Brass Cover plates of Length 320 mm x Breadth 130 mm size along with the Top Patch, Bottom Patch, Door Lock and Pivot with Double Cylinder etc. complete for Heavy duty Glass doors.

Each

11,346.00

 

VIII

SUB-SECTION

MORTICE LOCKS

 

 

 

660

TBSC-P.VIII-01

Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set

Each

848.00

 

661

TBSC-P.VIII-02

Heavy duty mortise lock 6/7 levers (IS:2209) with brass heavy handles

Each

2,181.00

 

IX

SUB-SECTION

OTHER ACCESSORIES

 

 

 

662

TBSC-P.IX-01

Brass Door Stoppers

Each

180.00

 

663

TBSC-P.IX-02

MS-Powder Coated - Door Stoppers

Each

45.00

 

664

TBSC-P.IX-03

Heavy duty Aluminium Door stopper

Each

58.00

 

665

TBSC-P.IX-04

Rubber/ Nylon door stop bushes

1 Each

10.00

 

666

TBSC-P.IX-05

Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated with PVC rings

RM

116.00

 

667

TBSC-P.IX-06

Supply & fixing drapery bracket - brass powder coated

pair

410.00

 

668

TBSC-P.IX-07

Nylon rollers for sliding glasses/ aluminium windows

1 Each

14.00

 

669

TBSC-P.IX-08

MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA

1 Each

32.00

 

670

TBSC-P.IX-09

Magnetic Catchers

1 Each

14.00

 

Q

SECTION

CONSTRUCTION CHEMICALS & ADMIXTURES

 

 

 

 

 

Approvedbrands,areaofapplication,dosa ge etc have been appended to this SoR for the guidance for preparation of estimates                                                                                       only. However,Literatureforusage/application of          construction/           water          proofing

materials,  epoxies  etc,  may  beobtained

 

 

 

I

SUB-SECTION

PLASTICIZERS

 

 

 

671

TBSC-Q.I-01

Concrete   Plasticizers           and Water            reducing

admixture Conforming toIS:9103-1999

1 Ltr

182.00

 

672

TBSC-Q.I-02

Early High Strength, High water retention, polycarboxylic plasticizers Conforming to IS:9103-1999

1 Kg

128.00

 

673

TBSC-Q.I-03

High performance super plasticizer and water reducing admixture Conforming to IS: 9103-

1999

1 Kg

86.00

 

674

TBSC-Q.I-04

Super plasticizer for high range water reducing admixture Conforming to IS: 9103-1999

1 Kg

96.00

 

675

TBSC-Q.I-05

Super plasticizer, high rangewater reducing and retarding admixture complying with IS: 9103-

1999

1 Kg

105.00

 

676

TBSC-Q.I-06

Plasticizer for accelerator for sprayed concrete Conforming to IS: 9103-1999.

1Kg

78.00

 

677

TBSC-Q.I-07

High Early Strength Concrete Admixture for Road Repairs

1 Ltr

26.00

 

II

SUB-SECTION

WATER PROOFING COMPOUNDS

 

 

 

678

TBSC-Q.II-01

Integral          Cement           Waterproofing           Liquid

Conforming to IS:2645-2003

1 Ltr

191.00

 

679

TBSC-Q.II-02

High durable                cementitious acrylic basedwaterproofingsystems

1 Kg

122.00

 

680

TBSC-Q.II-03

AcrylicPolymerElastomeric                      Cementitious

WaterproofCoatings

1 Ltr

318.00

 

681

TBSC-Q.II-04

Single         component,elastomeric              waterproof

membranecoating

1 Ltr

386.00

 

682

TBSC-Q.II-05

Quick setting, rapid hardening and water proofing compound Conforming to IS: I.S. 2645-

2003

1 Ltr

73.00

 

683

TBSC-Q.II-06

Highly Flexible Waterproof Acrylic Elastomeric bituminous Blended Coatings

1 Ltr

272.00

 

684

TBSC-Q.II-07

Two part system of fibre reinforced Acrylic Cementitious Waterproofing coating.

Kg

131.00

 

685

TBSC-Q.II-08

High strength cellulose fibre reinforced acrylic elastomeric liquid membrane waterproof coating

Ltr

279.00

 

686

TBSC-Q.II-09

High Strength Acrylic Penetrative U,V. Resistant concrete road top coatings.

Ltr

306.00

 

687

TBSC-Q.II-10

High performance polyurethane blended with bituminous Membrane coating ( Complies with ASTM C - 836 )

Ltr

568.00

 

688

TBSC-Q.II-11

Nano Technology water based transparent silicon water repellent

Ltr

655.00

 

 

 

Providing and applying Brushbond ( two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond powder and Brushbond liquid acrylic emulsion) for a minimum 2mm thickness coating. (Work shall be executed as per manufacturer’s

specification and instructions.

1 sqm

221.00

 

III

SUB-SECTION

BONDINGAGENTS/ADHESIVES

 

 

 

689

TBSC-Q.III-01

Acrylic based Bonding adhesive

1 Ltr

136.00

 

690

TBSC-Q.III-02

Styrene butadiene rubber based bonding agent

1 Kg

409.00

 

691

TBSC-Q.III-03

Two Parts system of Epoxy Bonding adhesive Conforming to ASTM-C 881

1 Kg

790.00

 

692

TBSC-Q.III-04

Liquid Polymer additive for cement & concrete mixes

1 Ltr

218.00

 

693

TBSC-Q.III-05

Polymer cementitious additive for fixing tiles/ stones etc

1 Kg

197.00

 

694

TBSC-Q.III-06

Highly   multi purposeRoadsGrade                    concrete

bondingagent

Ltr

197.00

 

IV

SUB-SECTION

ANTI-CORROSIVE AGENTS

 

 

 

695

TBSC-Q.IV-01

Acrylic based Anti corrosive coating

1 Ltr

318.00

 

696

TBSC-Q.IV-02

Rust converter –rust encapsulating coating for steel

1 Ltr

436.00

 

697

TBSC-Q.IV-03

High range of reinforcement / steel protector against corrosion zinc rich epoxy resin primer

1 Kg

680.00

 

698

TBSC-Q.IV-04

Anti corrosion CRPPC (Corrosion Resistant) inhibitive admixture

1 Lit

314.00

 

V

SUB-SECTION

GROUTS

 

 

 

699

TBSC-Q.V-01

High Power Polyester Resin Anchor Grout Conforming to ASTM-827

1 Kg

272.00

 

700

TBSC-Q.V-02

Non-shrink Free flow high strength precision grout Conforming to BS 1881 Part 1161983.

1 Kg

31.00

 

701

TBSC-Q.V-03

Low viscosity Epoxy resin injection grout

1 Kg

726.00

 

702

TBSC-Q.V-04

Three component epoxy grout Conforming to IS: ASTM 827 (Three components)

1 Kg

146.00

 

703

TBSC-Q.V-05

Expansive acqua -reactive water barrier and grouting system.

1 Kg

941.00

 

VI

SUB-SECTION

MISCELLANEOUS CHEMICALS

 

 

 

704

TBSC-Q.VI-01

Mould / Shutter releasing oil

1 Ltr

132.00

 

705

TBSC-Q.VI-02

Non oxidizing, heavy duty metallic Floor Hardeners

1 Kg

34.00

 

706

TBSC-Q.VI-03

Non-metallic Floor Hardeners

1 Kg

28.00

 

707

TBSC-Q.VI-04

High Strength, Non shrink Micro Concrete for structural repair product.

1 Kg

33.00

 

708

TBSC-Q.VI-05

Structural  graded                    polymer

modified

reinstatement concrete / mortar(Two Part

1 Kg

78.00

 

709

TBSC-Q.VI-06

Three Component high performance elastomeric mortar.

1 Kg

862.00

 

710

TBSC-Q.VI-07

Surface treatment crystalline product.

1 Kg

327.00

 

711

TBSC-Q.VI-08

Polyurethane Sealant. 600 ml tube

1 No

662.00

 

712

TBSC-Q.VI-09

Polysulphide Sealant.

1 Kg

409.00

 

713

TBSC-Q.VI-10

Acrylic Latex caulking compound.

1 Kg

304.00

 

714

TBSC-Q.VI-11

Fast setting cement based plugging compound

1 Kg

78.00

 

715

TBSC-Q.VI-12

Highly       Flexible        HighRange            Polyurethane

surfacecoatings

1 Ltr

590.00

 

716

TBSC-Q.VI-13

Coal Tar Epoxy

1 Kg

318.00

 

717

TBSC-Q.VI-14

Water Based Acrylic Blended High power curing compound

1 Kg

91.00

 

718

TBSC-Q.VI-15

Bituminous hot sealing compound

1 Kg

109.00

 

719

TBSC-Q.VI-16

Bitumen solution primer coating.

1 Kg

78.00

 

720

TBSC-Q.VI-17

Air Entraining Agent Conforming to IS: 9103-99

1 Ltr

109.00

 

721

TBSC-Q.VI-18

DELETED

 

DELETED

 

722

TBSC-Q.VI-19

Multifilament Polypropylene fibers of 6/12/18

mm length for Plastering, Screeds, all Precasting items

1 Kg

262.00

 

723

TBSC-Q.VI-20

Macro Synthetic fibers of 45mm length for CC Roads, Ground Supported Slabs, Pavements, Sprayed Concrete,Tunnel linings, Mining

1 Kg

393.00

 

724

TBSC-Q.VI-21

Steel Fibers of 35 mm length for CC Roads, Ground Supported Slabs, Pavements, Sprayed Concrete,Tunnel linings, Mining

1 Kg

87.00

 

725

TBSC-Q.VI-22

High strength, Acrylic blended dry colour mortar

/concrete

1 Kg

42.00

 

725-

1

TBSC-Q.VI-22

Pre construction Anti termite is a process in which chemical toxic to sub terrain termites is apply/ inject into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square  meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining  wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge(Plinth area measurements will be taken forpayment)

1 Sqm

150.00

 

VII

SUB-SECTION

REPAIRING & TREATMENT WORKS

 

 

 

Sl. No

 

ITEM CODE

 

DESCRIPTION OF THE ITEM

 

UNIT

SS RATE FOR 2019-20

 

726

TBSC-Q.VII-01

Providing Tar Felting roof repair with approved brand Tar Felt duly applying one coat of appropriate                                         grade of bitumen in hot condition @ 0.2 Kg/1 Sqm of roof area, fixing tar felt (Conforming to IS 1322-1972 specification), applying second coat of appropriate grade  of hot bitumen at 1.20 Kg / 1 Sqm of roof area and spreading course aggregate (sand) at0.063 Cum per 1 Sqm of roof area finisheditem.

1 Sqm

271.00

 

727

TBSC-Q.VII-02

Providing waterproofing treatment by supplying and fixing synthetic membrane  felt  of 1.50 mm thickness, 2.25 Kg per Sq. Mtr. duly applying one coat of Bituminous Emulsion, first coat of bituminous grade 85/25, fix waterproofing membrane, applying second coat of bitumen grade 90/15 after sealing all the joints and abutments with a Gas torch and applying one coat of bituminous aluminium paint for heat resistance for finisheditem.

1 Sqm

376.00

 

727-

1

TBSC-Q.VII-02- 1

Providing water proof treatment by supplying and fixing of MAT of 2mm thickness, 2.25 kg per sqm, first coat of bituminous emulsion, then one coat of bitumen 85/25 grade, fixing of water proofing membrane, sealing of joints with torch, applying second coat of bitumen 85/25 grade, and applying a coat of bituminous Aluminum paint for heat resistance for finished item of work as directed by the Engineer-in-Charge

1 Sqm

430.00

 

728

TBSC-Q.VII-03

Providing and laying of 3mmthick  app modified bitumen membrane treatment to the terrace duly [1]removing of existing tar felt. [2]cleaning of the surface from dirt, dust and other contaminations.[3]applicationof  one coat of Bitumenprimer[4]providingandlaying of 3mm thick APP Modified Bitumen Membrane with 100 mm overlap fixing withbutanetorch.

1 Sqm

512.00

 

729

TBSC-Q.VII-04

Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )

1 Sqm

407.00

 

730

TBSC-Q.VII-05

Providing specialized high build, elastomeric acrylic bituminous blended coating to theterrace / internal portion of the bathroom / toilets / basements / roofing duly a). Cleaning of the surface. b). Applying primer coat of High Build, Elastomeric Acrylic Bituminous Blended Coating c). Application of Two coats of High

Build,  Elastomeric  Acrylic  BituminousBlended

1 Sqm

376.00

 

731

TBSC-Q.VII-06

Providing specialized high solid, cold applied, acrylic elastomeric liquid membrane coating treatment to the terrace / roofing with fibre mesh / geo fabric duly a. Cleaning of the surface from dirt, dust and other contaminations. b. Applying one coat of High solid, Cold applied, Acrylic Elastomeric Liquid Membrane coating c. immediately, Application of one coat of High solid, Cold applied, Acrylic Elastomeric Liquid Membrane coating e. Laying of fibre mesh 40 GSM / Geo fabric 40 GSM on the surface. f. Over the Fibre mesh, Application of two coats of High solid, cold applied, Acrylic Elastomeric Liquid Membrane Coating

1 Sqm

595.00

 

732

TBSC-Q.VII-07

Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25 mmx

25 mm) duly a]. Chipping and removing of existing covering on expansion joints b]. Cleaning of the surface from dirt, dust and other contaminations c].Application of one coat of - High performance specially designed SBR latex polymer based bonding agent d]. Providing and application of Acrylic Polymer modified reinstatement concrete /mortar to the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top of the joint both sides f]. Providing and fixing of Back up support material of PVC Solid Backer rod to leave the depth of 25 mm on the joint g]. Providing and application of one coat of polysulphide primer on inner edges of Joint. h]. Providing and application of Two part Polysulphide sealant to a width of 25 mm and depth of 25 mm with putty knife and neat finish i]. Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitiouscoating

1 RM

678.00

 

733

TBSC-Q.VII-08

Pressure grouting the drilled holes with neat cement slurry or with approved grout admixture using pump - excluding cost of drilling holes

1 Each

53.00

 

734

TBSC-Q.VII-09

Providing multi-coloured silicon fluorocarbon spray coating of thickness 1mm for exterior & interior wall finishes to give Natural Granite appearance comprising of 4 coats including application of primer, waterproof coat, Multi colour texture & finally UV resistant with repellent clear coat of low VOC, non-toxic, Green Building compliant material

1 Sqm

1,447.00

 

735

TBSC-Q.VII-10

Providing and applying epoxy based anti skid coat over existing RCC/Concrete flooring surfaces of 2mm thickness for wear & tear protection in three part applications containing low solvent-coloured, epoxy resin based coating with                thyrotrophic                        propertiesspecially formulated for application in Car Parks having Mechanical / Physical Properties such as 1. Abrasion Resistance ~ 0.8mm thickness loss (According to IS 1237 – 1980 and IS 9162 - 1979) 2. Chemical Resistance to many chemicals 3.Thermal Resistance Exposure with Dry heat Permanent+50°C

1 Sqm

683.00

 

736

TBSC-Q.VII-11

Providing and applying epoxy resin based self levelling Conductive Floor System of 2mm thick Antistatic (ESD) Flooring System comprising of 1 coat of Primer followed by Application of copper tape and 1 layer of  SL ConductiveUndercoatand

1 layer of SL Conductive Top coat with Compressive strength after 7 days at +30° C: 50 N/mm2  and  Flexural  strength  after  7  days at

+30° C: approx. 25N/mm2 and Tensile strength after 7 days at +30° C: 16 N/mm2 with aSurface resistance When measured for surfaceresistance in accordance with BS 2050: 1978 (A-1984) and DIN EN 1081, the static Conductive topping includingundercoatshallbelessthan25k?.

1 Sqm

1,407.00

 

737

TBSC-Q.VII-12

Providing and applying food grade epoxy based water proof coat over existing RCC/Concrete flooring surfaces in three part applications containing low solvent-coloured, epoxy resin based coating with low VOC properties specially formulated for food grade application forpotable waterstoragetanksinambienttemperatures

1 Kg

281.00

 

VIII

SUB-SECTION

EXPANSION JOINTS

 

 

 

738

TBSC-Q.VIII-01

Supply of high performance expansion joint filler board conforming to IS: 1838 - 18 mm THICK

1 Sqm

729.00

 

739

TBSC-Q.VIII-02

Supply of high performance expansion joint filler board conforming to IS: 1838 - 20 mm THICK

1 Sqm

818.00

 

740

TBSC-Q.VIII-03

Supply of high performance expansion joint filler board conforming to IS: 1838 - 25 mm THICK

1 Sqm

1,022.00

 

741

TBSC-Q.VIII-04

Supply of expansion joint filler boardconforming to IS: 1838 for buildings, columns, beams and slabs 20 mmTHICK

1 Sqm

293.00

 

742

TBSC-Q.VIII-05

Supply of expansion joint filler boardconforming to IS: 1838 for buildings, columns, beams and slabs 25 mmTHICK

1 Sqm

366.00

 

743

TBSC-Q.VIII-06

Supply of expansion joint filler boardconforming to IS: 1838 for buildings, columns, beams and slabs 50 mmTHICK

1 Sqm

729.00

 

744

TBSC-Q.VIII-07

Supply of back up to cold applied gun-grade polysulphide sealant conforming to IS:11433 (Part-1) in construction and longitudinal joint - 10 mm OD

1 RM

12.00

 

745

TBSC-Q.VIII-08

Supply of back up to cold applied gun-grade polysulphide sealant conforming to IS:11433 (Part-1) in construction and longitudinal joint - 12 mm OD

1 RM

14.00

 

746

TBSC-Q.VIII-09

Supply of back up to cold applied gun-grade polysulphide sealant conforming to IS:11433 (Part-1) in construction and longitudinal joint - 15 mm OD

1 RM

17.00

 

747

TBSC-Q.VIII-10

Supply of back up to cold applied gun-grade polysulphide sealant conforming to IS:11433 (Part-1) in construction and longitudinal joint -

20 mm OD

1 RM

24.00

 

748

TBSC-Q.VIII-11

Supply of back up to cold applied gun-grade polysulphide sealant conforming to IS:11433 (Part-1) in construction and longitudinal joint - 25 mm OD

1 RM

30.00

 

R

SECTION

MISCELLANEOUS ITEMS

 

 

 

749

TBSC-R.I-01

Supply of White Cement conforming to IS:8042- 1989

1 Kg

29.00

 

750

TBSC-R.I-02

Supply of well burnt cinder aggregates as per IS: 2686-1977

1 Cum

808.00

 

751

TBSC-R.I-03

Supply of Aluminium anodized Sections for Doors, partitions, windows, Ventilators (including annodization cost) conforming to IS:

11857 - 1986

1 Kg

292.00

 

752

TBSC-R.I-04

Providing Powder coating as per IS:13871-1993 or colourannodization as per IS:7088-1973 - on any aluminium or mild steel section

1 Kg

30.00

 

753

TBSC-R.I-05

Providing hot dip galvanizing to any steel section as per IS:2629-1985

1 Kg

18.00

 

754

TBSC-R.I-06

Supply of Clear Silicone Sealant (Glass Glue Sealant) of Gun Applicator grade

1 Kg

211.00

 

755

TBSC-R.I-07

Supply of Sun Control film to the glazed windows partition including labour charges.

1 Sqm

299.00

 

756

TBSC-R.I-08

Supply of Aluminium Venetian Blinds horizontal

25.4 mm wide with all accessories.

1 Sqm

760.00

 

757

TBSC-R.I-09

Supply of Aluminium Venetian Blinds horizontal

20.0 mm wide with all accessories.

1 Sqm

724.00

 

758

TBSC-R.I-10

Supply of Venetian blinds Vertical blinds 100 mm wide with allaccessories.

1 Sqm

1,229.00

 

759

TBSC-R.I-11

Supply of Rubber Beading for glass fixing

1 RM

3.00

 

760

TBSC-R.I-12

Supply of Soft Brush for painting, varnishing etc

Each

134.00

 

761

TBSC-R.I-13

Supply of Wire Brush for scraping

Each

31.00

 

762

TBSC-R.I-14

Providing and fixing PVC door cladding to the flush doors shutters, for the new doors it shall be pasted with synthetic glue or nailed to the old doors. complete as per direction of Engineer–in– charge, manufacturers specification and drawing

- 1 mm thick

1 Sqm

354.00

 

763

TBSC-R.I-15

Providing and fixing PVC door cladding to the flush doors shutters, for the new doors it shall be pasted with Synthetic glue SSR 998 or nailed to the old doors. complete as per direction of Engineer–in–charge, manufacturersspecification and drawing - 1.5 mmthick

1 Sqm

404.00

 

764

TBSC-R.I-16

Providing and fixing PVC door cladding to the flush doors shutters, for the new doors it shall be pasted with Synthetic glue SSR 998 or nailed to the old doors. complete as per direction of Engineer–in–charge, manufacturersspecification and drawing - 2.0 mmthick

1 Sqm

456.00

 

765

TBSC-R.I-17

Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, scaffolding charges,if any, ACP Cladding - 3 mmthick

1 Sqm

2,357.00

 

766

TBSC-R.I-18

Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, scaffolding charges,if any, ACP Cladding - 4 mmthick

1 Sqm

2,570.00

 

767

TBSC-R.I-19

Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, scaffolding charges,if any, ACP Cladding - 4 mmthick

1 Sqm

2,882.00

 

768

TBSC-R.I-20

S&F of pre-cast RCC Grills of any design of 25 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shutteringfinish and adequately reinforced for long use and to prevent damage during handling, transportation &erectionetc.,

1 Sqm

345.00

 

769

TBSC-R.I-21

S&F of pre-cast RCC Grills of any design of 40 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shutteringfinish and adequately reinforced for long use and to prevent damage during handling, transportation &erectionetc.,

1 Sqm

481.00

 

770

TBSC-R.I-22

S&F of pre-cast RCC Grills of any design of 50 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shutteringfinish and adequately reinforced for long use and to prevent damage during handling, transportation &erectionetc.,

1 Sqm

565.00

 

770-

1

TBSC-R.I-22-1

Providing and fixing 18MM MPC (Mineral Polymer Composite) frosty white board pre extruded and then CNC (Computer Numeric control) cut with  8MM slot drill (Double Flute) bit on Italian Biesse Machine to ensure the precision and accuracy upto 1 micron. The MPC Grill/Jalli is fixed on a MS frame made of 32*32 MM square Hollow box section of thickness of 1.5 MM placed at grid made at 1 Mtr*1 Mtr or as per requirement at site. The rate is inclusive of cost and transportation of all materials inclusding framework, hardware fixtures etc, complete for finishing item ofwork.

1 Sqm

3420.00

 

771

TBSC-R.I-23

Supply of Aluminium sheet 24 Gauge

1 Sqm

274.00

 

772

TBSC-R.I-24

Supply   of7.5mmthick               AluminiumGrill (asapprovedbythedepartment)3.58Kg/1Sqm

1 Sqm

1009.00

 

 

 

Design, fabrication & supply of light weight pre engineered buildings for a maximum span of 9 meters with 50 x 50 x 2.8 mm M.S hollow square tubes for columns, trusses & purlins walls with sandwich panels made up of 2 Nos 10mm thick cement bonded particle/ fibre boards with 25mm thick 12 kg/cum density expanded polystyrene in between encased in 1.25 mm thick 24x7x26 mm ‘W’ tracks in bottom & top and ‘H’ section for sides with doors, windows & ventilators, roofing with 26 gauge pre painted profiled sheets fixed with self tapping/ drilling screws, painting with enamel paint for steel items, OBD for interiors and ace for exteriors & providing base plates, templates & anchor bolts along with civil foundation designs & drawings for the finished item ofwork

 

 

 

773

TBSC-R.I-25

Steel Structure: - Structure is made up of 50x50x2.8 m/33x66x2.8mm thick hollow M.S. sections for -Columns and purlins

1 RM

395.00

 

774

TBSC-R.I-26

Steel Structure: - Structure is made up of 50x50x2.8 m/33x66x2.8mm thick hollow M.S. sections for Trusses

1 RM

1,987.00

 

775

TBSC-R.I-27

10 mm thick 200 X 200 mm M.S Plates for base plates, 250mm long 12mm anchor bolts with plate washer and nuts complete with one coat of Asian or equivalent red oxide paint

Each

671.00

 

776

TBSC-R.I-28

Sandwich panels: Sandwich panels of 50 mm thick with 25 mm Thermocol of 12 kg / cum, fixed in betw0een 2 Nos 10 mm cement bonded wood particle / fibre boards properly fixed together with 30 mmx30mmx30mm wood pieces along width & length wherevernecessary

1 Sqm

1,430.00

 

777

TBSC-R.I-29

U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are made of 1.25 mm thick 120 GSM G.I. Sheet of size24x51x26 mm size.

1 RM

155.00

 

778

TBSC-R.I-30

G I ‘H’ Section is made up of forming width of 275 mm single sheet roll formed in the shape of “H” section without any welding joint. 40mm width for flanges and 51 mm for web to hold 50 mmSandwichpanel

1RM

254.00

 

Sl. No

 

ITEM CODE

 

DESCRIPTION OF THE ITEM

 

UNIT

SS RATE FOR 2019-20

 

779

TBSC-R.I-31

Sandwich Panel joinery is made up of couplersor equivalent made from 0.6 mm G.I. roll formed section to hold 2 Nos of 10 mm board on both sideswith25mmThermocolinbetween.

1 RM

301.00

 

780

TBSC-R.I-32

150 mm X 150 mm X 2.0 mm size M. S. Corner Cover Plate

1 RM

362.00

 

781

TBSC-R.I-31

Window:- windows are made up of 51 x51 mm step 'U' section made from 1.25 thick MS Cold rolled Steel Sheet and Windows Shutters & Grill are made of 48x25mm mm size pre painted sectionwith4mmglasscompletewithnecessary hardware. Grills are made from 8 mm square rod at 100 mmspacing.

1 Sqm

4,163.00

 

782

TBSC-R.I-32

Door Frames :-51 X 51 Stepped ' U' section made from 1.25 mm thick C.R. section with a 32 mm rebate for 30 mm flush door and Door Shutters with 30 mm thick block board / flush doors with boiling water proof plywood complete with necessary Hard ware.

1 Sqm

3,984.00

 

783

TBSC-R.I-33

Ventilators:- Ventilators are made of 51x51 mm step 'U' section made From 1.25 mm thick C.R. sheet with fixed louvers and glass.

1 Sqm

4,459.00

 

784

TBSC-R.I-34

Painting:-1) Steel structure is to be painted with 2 coats of Grade I enamel paint.

1 Sqm

113.00

 

785

TBSC-R.I-35

2) Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

1 Sqm

101.00

 

786

TBSC-R.I-36

3) Interiors are painted with 1+2 coat of O.B.D.

1 Sqm

88.00

 

787

TBSC-R.I-37

Toilets: - Toilets are provided as per plan with a provision for fixing the wash basin, W.C. etc only is made with M.S. steel section secured to the walls with toilet bracket provision excludingcost of WC/ Wash basinetc

Each

953.00

 

788

TBSC-R.I-38

Sun shades: - Sun shades will be provided wherever necessary with 300 mm more than the width of window. 25x25 mm angle frame to cover 450 mm in the front and the sides. 10mm cement bonded particle board will be fixed on the frame work and sealed with green paste or equivalent.

Each

3,211.00

 

789

TBSC-R.I-39

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiledsheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anticapillary grove.

1 Sqm

725.00

 

790

TBSC-R.I-40

Preparing gabions with jungle wood

Each

3.00

 

791

TBSC-R.I-41

Planting plants

Each

3.00 111

 

792

TBSC-R.I-42

Pruning plants

Each

3.00

 

793

TBSC-R.I-43

Maintaining avenues including fencing, weeding, mulching, watering etc per plant.

Each

7.00

 

Sl. No

 

ITEM CODE

 

DESCRIPTION OF THE ITEM

 

UNIT

SS RATE FOR 2019-20

 

794

TBSC-R.I-44

Maintaining avenues including fencing, weeding, mulching, watering etc per plant When scattered in hot weather with extra conveyance from March to June

Each

8.00

 

795

TBSC-R.I-45

Hoisting or lowering of slab

1 cum

110.00

 

796

TBSC-R.I-46

Drilling holes in hard rock surfaces up to 18mm Diameter

1 RM

275.00

 

797

TBSC-R.I-47

Drilling  holes   in                           rock above  18mm

Diameter

1 RM

383.00

 

798

TBSC-R.I-48

Making holes up to 18mm Diameter in RCC/ any stones up to 50 mm thick

1 Each

46.00

 

799

TBSC-R.I-49

Making holes above 18mm Diameter in RCC/ any stones above 50 mm thick

1 Each

65.00

 

800

TBSC-R.I-50

Supplying EPDM Gasket for windows panes to the PPS shutter

1 RM

32.00

 

801

TBSC-R.I-51

Supplying SS 304 Grade Heavy Duty Pivot Hinges for windows

1 Each

78.00

 

S

SECTION

MACHINERY & OTHER HIRE CHARGES

 

 

 

802

TBSC-S.I-01

Machine charges of rubbing/ polishing floor

1 Hr

279.00

 

803

TBSC-S.I-02

Power Saw Cutter - Hand Operated - Hire

charges

1 Hr

130.00

 

804

TBSC-S.I-03

Power Drill - Hand Operated - Hire Charges

1 Hr

121.00

 

805

TBSC-S.I-04

Grinding Mortar (Special Grinding)

1 Hr

140.00

 

806

TBSC-S.I-05

Casuarinas Balli Props - 3" to 4" Diameter - 12'- 0" Height

Each

76.00

 

807

TBSC-S.I-06

Casuarinas Balli Props - 4" to 8" Diameter - 20'- 0" Height

Each

126.00

 

808

TBSC-S.I-07

Wall Plate Brackets / beam bottom supports

Each

221.00

 

809

TBSC-S.I-08

Wedge Plate fixture

Each

11.00

 

810

TBSC-S.I-09

Runner beams of approximately 4" x 4" size

RM

442.00

 

811

TBSC-S.I-10

Steel Plates for form works

1 Sqm

1,671.00

 

812

TBSC-S.I-11

Scaffolding Pipes & Centering accessories

1 Kg

126.00

 

813

TBSC-S.I-12

Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long

Each

135.00

 

814

TBSC-S.I-13

Hire charges for stationary Concrete pump conforming to IS 21573 Part-1: 2006 to deliver the fresh green concrete

1 Hr

356.00

 

815

TBSC-S.I-14

Concrete delivery pipes conforming to IS 15947 Part I: 2012 to be connected to the pump to delivery point (150 mm Diameter) hire charges

per 10 RM

1 Hr

5.00

 

T

SECTION

LABOUR CHARGES

 

 

 

816

TBSC-T.I-01

Bailing out water for earth work excavation

/concrete for foundation below water level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M

1 cum

282

 

817

TBSC-T.I-02

Bailing out water for earth work excavation

/concrete for foundation below water level. (For building items only) - Other than sandy soil - 1.0 M to 2.0 M

1 cum

334

 

818

TBSC-T.I-03

Bailing   out   water   for   earth   workexcavation

/concrete for foundation below water level.(For

1 cum

389

112

 

819

TBSC-T.I-04

Bailing out water for earth work excavation / for concrete foundation below water level. (For building items only) Sandy soil - 0.0 M to 1.0 M

1 cum

448.00

 

820

TBSC-T.I-05

Bailing out water for earth work excavation /for concrete foundation below water level. (For building items only) Sandy soil - 1.0 M to 2.0 M

1 cum

697.00

 

821

TBSC-T.I-06

Bailing out water for earth work excavation

/concrete for foundation below water level. (For building items only) Sandy soil - 2.0 M to 3.0 M

1 cum

842.00

 

822

TBSC-T.I-07

Labour charges for making, fabricating office racks, cup-board shutters etc with ply-wood/ MDF sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings

1 Sqm

1190.00

 

823

TBSC-T.I-08

Labour charges for making, fabricating kitchen furniture, cup-boards with shutters, box cup- boards, box racks, work-station furniture etc with ply-wood/ MDF sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings

1 Sqm

1780.00

 

824

TBSC-T.I-09

Labour charges for making, fabricating any aluminium door/ window/ glazing including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, fixing in position with necessary screws excluding cost of materials, accessories, fittings excluding cost of annodization

1 Sqm

550.00

 

825

TBSC-T.I-10

Rounding the edges of Kadapa / Shahabad stone slabs of any thickness including polishing the same

1 Rm

122.00

 

826

TBSC-T.I-11

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing thesame.

1 Rm

370.00

 

827

TBSC-T.I-12

FullRoundingtheedgesofMarble/Granitestone slabs of all thicknesses including polishing the same.

1 Rm

480.00

 

828

TBSC-T.I-13

Machine Cutting charges - for Marble/ Granite slabs up to 50 mm thick by mechanical device.

1 RM

19.00

 

829

TBSC-T.I-14

Flat nosing to Kadapa/ Shahabad stone slabs of any thick

1 Rm

58.00

 

830

TBSC-T.I-15

Grooves 2-3 mm

1 Rm

65.00

 

831

TBSC-T.I-16

Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position

1 Kg

30.00

 

832

TBSC-T.I-17

Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position

1 Kg

4.00

 

833

TBSC-T.I-18

Labour charges for fabricating all structural steel works like heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position

1 Kg

27.00

 

834

TBSC-T.I-19

Labourchargesforerecting&fixingallstructural steel works like heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete inposition

1 Kg

24.00

 

835

TBSC-T.I-20

Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish

1 Kg

153.00

 

836

TBSC-T.I-21

Labour charges for Fabrication of stainless steel sheet cladding works using stainless steel welding                                 rods               including                buffing, polishing,lacquerfinishing,topresentseamlessfini

1 Sqm

2050.00

 

837

TBSC-T.I-22

Labour charges for Glass designing works on any thickness of Glass including fixing at site - Etching works

1 Sqm

1116.00

 

838

TBSC-T.I-23

Labour charges for Glass designing works on any thickness of Glass including fixing at site - Reverse Etching work

1 Sqm

1380.00

 

839

TBSC-T.I-24

Labour charges for Glass designing works on any thickness of Glass including fixing at site - Acid wash works

1 Sqm

1725.00

 

840

TBSC-T.I-25

Labour charges for fixing Flush door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter

1 Sqm

447.00

 

841

TBSC-T.I-26

Labour charges for fixing glass panes of any thickness to the existing door / window panes including fixing the beading excluding cost of beading

1 Sqm

333.00

 

842

TBSC-T.I-27

Labour charges for wrought and put upincluding fixing in position for Teak wood Fully panelled doorsexternalorinternalincludingframe

1 Sqm

2103.00

 

843

TBSC-T.I-28

Labour charges for wrought and put upincluding fixing in position for Teak wood Glazed and panelled doors including fixing glass including frame

1 Sqm

1950.00

 

844

TBSC-T.I-29

Labour charges for wrought and put upincluding fixing in position for Teak wood Framed and planked doors includingframe

1 Sqm

1744.00

 

845

TBSC-T.I-30

Labour charges for wrought and put upincluding fixing in position for Teak wood Ledged, braced and planked doors includingframe

1 Sqm

1363.00

 

846

TBSC-T.I-31

Labour charges for wrought and put upincluding fixing in position for Teak wood Flush type door shutter includingframe

1 Sqm

984.00

 

847

TBSC-T.I-32

Labour charges for wrought and put upincluding fixing in position for Teak wood Windows glazedincludingouterframeandshutterframe

1 Sqm

1316.00

 

848

TBSC-T.I-33

Labour charges for wrought and put upincluding fixing in position for Teak wood Windows panelled including outer frame and shutter frame

1 Sqm

2028.00

 

849

TBSC-T.I-34

Labour charges for wrought and put upincluding fixing in position for Teak wood Windows ledged, braced and planked includingouter

frame

1 Sqm

1386.00

 

850

TBSC-T.I-35

Labour charges for wrought and put upincluding fixing in position for Teak wood Windows framed and planked including outer frame and shutterframe

1 Sqm

1655.00

 

851

TBSC-T.I-36

Labour charges for wrought and put upincluding fixing in position for Teak wood Ventilators glazed, fixed with double frame with wirenetting includingframe

1 Sqm

1022.00

 

852

TBSC-T.I-37

Labour charges for wrought and put upincluding fixing in position for Teak wood Swing ventilators glazed including outer frame and shutterframe

1 Sqm

1317.00

 

853

TBSC-T.I-38

Labour charges for wrought and put upincluding fixing in position for Teak wood Weld mesh doors and windows including outer frame and shutterframe

1 Sqm

703.00

 

854

TBSC-T.I-39

Labour charges for wrought and put upincluding fixing in position for Teak wood G.I or .AC sheet door & windows including outer frame and shutterframe

1 Sqm

787.00

 

855

TBSC-T.I-40

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Fully panelled doors external or internal including frame

1 Sqm

1759.00

 

856

TBSC-T.I-41

Labour charges for wrought and put upincluding fixing in position for Other than teakwoodGlazed and panelled doors including fixing glass

includingframe

1 Sqm

1671.00

 

857

TBSC-T.I-42

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Framedandplankeddoorsincludingframe

1 Sqm

1458.00

 

858

TBSC-T.I-43

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Ledged, braced and planked doors including frame

1 Sqm

1141.00

 

859

TBSC-T.I-44

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Flush type door shutter includingframe

1 Sqm

896.00

 

860

TBSC-T.I-45

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Windows glazed including outer frame and shutterframe

1 Sqm

1131.00

 

861

TBSC-T.I-46

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Windows panelled including outer frame and shutterframe

1 Sqm

1696.00

 

862

TBSC-T.I-47

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Windows ledged, braced and planked including

outerframe

1 Sqm

1160.00

 

863

TBSC-T.I-48

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Windows framed and planked including outer frame and shutterframe

1 Sqm

1384.00

 

864

TBSC-T.I-49

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Ventilators glazed, fixed with double frame with wire netting includingframe

1 Sqm

956.00

 

865

TBSC-T.I-50

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Swing ventilators glazed including outer frame and shutterframe

1 Sqm

1204.00

 

866

TBSC-T.I-51

Labour charges for wrought and put upincluding fixing in position for Other than teakwood Weld mesh doors and windows including outer frame and shutterframe

1 Sqm

616.00

 

867

TBSC-T.I-52

Labour charges for wrought and put up including fixing in position for Other than teakwood G.I or

.AC sheet door & windows including outer frame and shutter frame

1 Sqm

699.00

 

868

TBSC-T.I-53

Dressing faces of granite stone (double line dressing)

1 Sqm

204.00

 

869

TBSC-T.I-54

Dressing faces of other than granite stone(double line dressing)

1 Sqm

127.00

 

870

TBSC-T.I-55

Labour charges for removing and refixing with complete servicing of the MS Windows

1 Sqm

435.00

 

U

SECTION

DISMANTLING

 

 

 

871

TBSC-U.I-01

Stone masonry in cement mortar

1 Cum

464.00

 

872

TBSC-U.I-02

Terracing work in roofs or floors

1 Sqm

19.00

 

873

TBSC-U.I-03

Flat stones in roof or floors including lifting

1Sqm

17.00

 

874

TBSC-U.I-04

Pan tiled or Mangalore tiled roof without roof timbers.

1Sqm

15.00

 

875

TBSC-U.I-05

Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers

1Sqm

17.00

 

876

TBSC-U.I-06

Wrought and framed timber in roofs or floors

1 Cum

241.00

 

877

TBSC-U.I-07

Old lime mortar plaster

1Sqm

5.00

 

878

TBSC-U.I-08

Old cement mortar plaster

1Sqm

6.00

 

879

TBSC-U.I-09

Dry rough stone revetment for aprons and stacking within 40 M lead

1 Cum

75.00

 

880

TBSC-U.I-10

Revetment for aprons and stacking grouted within 40 lead

1 Cum

56.00

 

881

TBSC-U.I-11

Kadapa slabs or Shahabad stone slabs flooring on sand bed

1Sqm

8.00

 

882

TBSC-U.I-12

Through scraping of old plastered surface

1Sqm

5.00

 

883

TBSC-U.I-13

Washing of plastered surface with soap, soda and water (or with soda lime and water)

1Sqm

2.00

 

884

TBSC-U.I-14

Clean removal of lime plaster from walls and raking out joints 20 mm deep or from terraced roof and raking out joints up to 50 mm deep

1Sqm

5.00

 

885

TBSC-U.I-15

Clean removal of cement plaster from walls and raking out joints 20 mm deep or from terraced roof and raking out joints from 50 mm to 100

mm deep

1Sqm

6.00

 

V

SECTION

GYPSUM PLASTER

 

 

 

886

TBSC-V.I-1

Supply and applying 20 mm thick fine Gypsum plaster on internal RCC surfaces like Ceilings, Beams, Columns, walls duly preparing the surfaces clean and dry including cost of material, application charges to make even surface, labour charges, unloading, loading, scaffolding etc complete for finished item of work.

1Sqm

500.00

 

887

TBSC-V.I-2

Supply and applying 12 mm thick fine Gypsum plaster on internal RCC surfaces like Ceilings, Beams, Columns, walls duly preparing the surfaces clean and dry including cost of material, application charges to make even surface, labour charges, unloading, loading, scaffolding etc complete for finished item of work.

1Sqm

300.00

 

****