Electro Mechanical -3

Electro Mechanical -3

Thermal Insulation

268

ELEC-5.6.26

Supply &Fixing of Duct Thermal Insulation applied outside of the duct work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with adhesive and tapes.

13 mm Thick

sqm

580

Accoustic Insulation

269

ELEC-5.6.27

Supply & Fixing of Duct Accoustic Insulation applied inside of the duct work with All. backed Open cell nitrile duly fixed with adhesive and tapes

10/15 mm Thick

sqm

900

270

ELEC-5.6.28

Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for supply with removable core type with collar damper

sqm

8500

271

ELEC-5.6.29

Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for retrun with removable core type without collar damper

sqm

6200

272

ELEC-5.6.30

Supply , Erection and Testing of GI Opposed blade Volume control dampers made out of 18G frame and 20G blades

sqm

5400

273

ELEC-5.6.31

Supply , Erection of Fresh air louver with extruded aluminium grill with SS wire mesh and GI volume control damper with 20 micron filters

sqm

4300

274

ELEC-5.6.32

Supply and Installation of Underdeck Insulation with 50 mm thk EPS, 48 Kg/Cum density, factory laminated faced alumimun foil coreved with GI cross wiring.

sqm

650

275

ELEC-5.6.33

Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard,Minimum width of damper shall be 225 mm.

sqm

6500

276

ELEC-5.6.34

Supply and Installation of GI backdraft dampers as per UL 555 Standard,

sqm

5400

277

ELEC-5.6.35

Supply, installation and testing of Canvas connection for the Treated Fresh Air units to the duct

each

2200

5.7

EVAPORATIVE AIR COOLING SYSTEM

278

ELEC-5.7.1

Supply of single phase evaporative air cooling unit with a capacity of 9000 CFM consisting cabinet and water tank made of polypropylenematerial, blower water pump of 40W, single phase 1.20 KW motor axial type fan with variable speed, 20 micron filteration, noise levelless than 78 dBA with auto cleaning,humidity control and water lack protection etccomplete. Makes: Cool Breeze / Breeze Air

1 No

105000

279

ELEC-5.7.2

Supply of Three phase evaporative air cooling unit with a capacity of 12000 - 15000 CFM consisting cabinet and water tank made of polypropylene material, blower water pump of 40W, Three phase 3.0 KW motor axial type fan with 2 speed, 20 micron filteration, noise level less than 78 dBA with auto cleaning and water lack protection etc complete. Makes: Cool Breeze
/Breeze Air

1 No

180000

280

ELEC-5.7.3

Supply and fixing of 13mm thick Nitrile insulation for out door unit.

1 sft

281

ELEC-5.7.4

Supply and fixing of 50mm thick glasswool of 24 kg density with alluminium foil insulation for indoor duct.

1 sft

282

ELEC-5.7.5

Supply and fixing of angular iron frame with 2 coats of zincromat red oxide for installation of air cooling unit

1 No

5000

283

ELEC-5.7.6

Installation and commissioning charges for air cooling unit

1 No

3600

5.8

STABILIZERS

284

ELEC-5.8.1

Supplly of ………... Stabilizer. Makes: V- Guard / Real Guard / Uni Stab / ITL.

0.5 KVA

1 No

820

1.0 KVA

1 No

1450

3.0 KVA

1 No

2000

4.0 KVA

1 No

2700

5.0 KVA

1 No

3300

285

ELEC-5.8.2

Supplly of ………... Stabilizer. Makes: Keeline / Soft Line

0.5 KVA

1 No

675

1.0 KVA

1 No

1300

3.0 KVA

1 No

1700

4.0 KVA

1 No

2500

5.0 KVA

1 No

3100

5.9

REPAIRING OF FANS, COOLERS, PUMPS, MOTORS, FRIDGES AND AIRCONDITIONERS

286

ELEC-5.9.1

Rewinding of ceiling fan motor (starting and running winding) including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as required. (New model ceiling fan)

900/1200 mm sweep

1 No

325

1400 mm sweep

1 No

390

287

ELEC-5.9.2

Charges for oiling, greasing, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing,refixing of fan from site and testing etc. as required

1 No

150

288

ELEC-5.9.3

Providing and Replacement of ball bearing of ceiling/ exhaust fan as required. (NBC/ SKF)

1 No

175

289

ELEC-5.9.4

Providing and Replacement of Gun metal bush of ceiling/ exhaust/cooler fan/ as required

1 No

150

290

ELEC-5.9.5

Servicing and overhauling of 20" sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required.

1 No

250

291

ELEC-5.9.6

Painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required

1 No

450

292

ELEC-5.9.7

Replacement of cooler pads (heavy) set of 3 no. of size 25" x 27"

1 No

150

293

ELEC-5.9.8

Supply and fixing of Brass float valve of weighing approx. 250 gm, 8" long rod,PVC ball of 4" dia. For desert coler as required.

1 No

200

294

ELEC-5.9.9

Supply and fixing of adjustable M.S.grill 20/22 gauge of size approx. 24" x 26" including painting etc. as required

1 No

360

295

ELEC-5.9.10

Spray painting of ceiling fan of size 900/1200/ 1400 mm with two coats of white/ brown enamelled paint after cleaning with sand paper. Filling etc. as required.

1 No

175

296

ELEC-5.9.11

Rewinding of Heavy duty Exhaust fan motor including all necessary material,The motor is to be wound taking no. of coils,turns and pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as
required.

300/ 380 mm sweep

1 No

550

450 mm sweep

1 No

650

600 mm sweep

1 No

1100

297

ELEC-5.9.12

Rewinding of 400 mm table fan/pedestal fan motor including all necessary material,The motor is to be wound taking no. of coils,turnsand pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as required.

1 No

350

298

ELEC-5.9.13

Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required.

1 No

0.5 H.P. To 1.00 H.P.

1 No

700

2.0 H.P

1 No

1150

299

ELEC-5.9.14

Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required.

3.0 H.P.

1 No

1700

5.0 H.P.

1 No

2400

7.5 H.P

1 No

2600

10.0 H.P

1 No

3500

12.5 H.P

1 No

3700

15.0 H.P

1 No

4500

300

ELEC-5.9.15

Supply and charging of fresh refrigerant and testing of
performance of air conditioner/ fridge/ water cooler of following capacity including capallary and strainer/ filter.

1.0 TR Window/ Split A.C

1 No

1900

1.5 TR Window/ Split A.C

1 No

2100

2.0 TR Window/ Split A.C

1 No

2500

25/50 / 40/80 Ltr. Water cooler

1 No

2000

60/120 Ltr. Water cooler

1 No

2300

150/150 Ltr. Water cooler

1 No

2800

165 Ltr Refrigerator

1 No

1250

200/210 Ltr Refrigerator

1 No

1800

286/310 Ltr Refrigerator

1 No

2100

301

ELEC-5.9.16

Replacement of defective compressor by company repaired compressor of fridge./water cooler including testing etc. as required. (Carrier/ Kirlosker/ Techam-Shah/ Shriram/ Voltas)

25/50 / 40/80 Ltr. Water cooler

1 No

6000

60/120 Ltr. Water cooler

1 No

7600

150/150 Ltr. Water cooler

1 No

9000

165 Ltr Refrigerator (Carrier/ Kirlosker/ Techam-Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator)

1 No

3100

200/210 Ltr Refrigerator (Carrier/ Kirlosker/ Techam-Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator)

1 No

3800

286/310 Ltr Refrigerator (Carrier/ Kirlosker/ Techam-Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator)

1 No

4300

302

ELEC-5.9.17

Supply of ……… brandnew Rotary type sealed compressor for Air conditioner Makes: DAIKIN/LG/Carrier/Kirloskar/Techam-shah

1.0/1.5 TR

1 No

9500

2 TR

1 No

10450

303

ELEC-5.9.18

Replacement of condensing/ cooling coil of copper fins for following capacity A.C./ Water cooler/ Fridge as required

1.0 TR A.C.

1 No

3565

1.5 TR A.C.

1 No

4025

2.0 TR A.C.

1 No

4485

25/50 / 40/80 Ltr. Water cooler

1 No

2400

60/120 Ltr. Water cooler

1 No

3500

150/150 Ltr. Water cooler

1 No

3500

165 Ltr Refrigerator

1 No

1100

200/210 Ltr Refrigerator

1 No

1200

286/310 Ltr Refrigerator

1 No

1550

304

ELEC-5.9.19

Replacement of overload protection of A.C./ Water cooler as required

1 No

500

305

ELEC-5.9.20

Replacement of thermostat of A.C./ Water cooler/fridge as required.

1 No

450

306

ELEC-5.9.21

Replacement of starting relay of A.C/water cooler/fridge compressor as required

1 No

490

307

ELEC-5.9.22

Spray painting of complete fridge (inside and outside ) of 165/ 200/286/310 Ltr. Capacity

1 No

1600

308

ELEC-5.9.23

Supply and fixing of 230V/ 275V, 50Hz rating ……….

Starting capacitor

20-60 micro farad

1 No

200

80-150 micro farad

1 No

400

Running capacitor

1 No

2.5/3.15/4.0/6.0 micro farad

1 No

8.0 micro farad

1 No

110

10.0 micro farad

1 No

150

15.0 to 36.0 micro farad

1 No

350

309

ELEC-5.9.24

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit.

1 Set

1200

310

ELEC-5.9.25

Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev.
Nitrile Insulation: Kflex/ Totaline /Armaflex

1/2" x 1/4"

1 Mtr

810

5/8" x 1/4"

1 Mtr

890

3/4" x 3/8"

1 Mtr

975

7/8" x 1/2"

1 Mtr

1100

1 1/8" x 5/8"

1 Mtr

1350

311

ELEC-5.9.26

Multi speed Fan Motor suitable for 1.0
/ 1.5 / 2.0 Ton Window A.C.Unit Makes : Crompton / AU.

1 No

1425

312

ELEC-5.9.27

Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. / NYLON.

1 No

250

313

ELEC-5.9.28

Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / NYLON.

1 No

430

314

ELEC-5.9.29

Fan blade for 1.0 / 1.5 Ton A.C.Machine.

1 No

500

315

ELEC-5.9.30

Installation of Split Air Conditioners.

1 No

1600

316

ELEC-5.9.31

Removing of existing Split Air Conditioners without damaging to copper pipe.

1 No

600

317

ELEC-5.9.32

Installation of Cassette type Split Air Conditioners.

1 No

4000

318

ELEC-5.9.33

Installation of Tower type Split Air Conditioners.

1 No

3000

319

ELEC-5.9.34

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of 3.5 /4.50 TR Casseete AC unit.

1 Set

1700

SECTION 6

6.1

SWAGED / OCTAGONAL POLES AND GARDEN POSTS

320

ELEC-6.1.1

Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications. The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete.(Rate per K. G)

1 Kg

321

ELEC-6.1.2

Fabrication and Supply of M.S. Poles for garden posts with 'B' class 60.25mm outer dia with base plate and suitable pole cap including cost and conveyance of all material including fixing of luminaire and labour charges etc., complete. (Rate per K. G)

1 Kg

322

ELEC-6.1.3

Supply of different sizes of M. S. Pipe brackets (Rate per K.G)

1 Kg

OCTOGONAL POLEs

323

ELEC-6.1.4

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

11760

324

ELEC-6.1.5

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

17000

325

ELEC-6.1.6

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template. Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

18690

326

ELEC-6.1.7

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 12 mtrs height Pole having dimensions Bottom 240mm, Top 100mm with 4mm thick, base plate 320 x320 x20mm and 4 Nos of M24 x 850 long 'J' bolts along with template. Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

27000

DECORATIVE DRAGON TYPE BRACKET WITH POLE

327

ELEC-6.1.8

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitableboards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180KMPH for 9 Mtrs Mounting height Pole having dimensions Bttom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J' bolts along with templates. Including Supply of1.5M Dragon typedecorative ...................
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper

galvanised double arm with PU Painted bracket.

1 No

26600

galvanised Single arm with PU Painted bracket.

1 No

22800

Double arm GalvanizeFinished bracket

1 No

22500

Single arm GalvanizeFinished bracket

1 No

20400

328

ELEC-6.1.9

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate with
door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs Mounting height Pole having dimensions Bottom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x

1 No

DELETED

1000long 'J' bolts along with templates. Including Supply of 1.5M Dragon type decorative
Makes : Bajaj / Valmont
/Transrail/Utkarsh/ Skipper/ /United

329

ELEC-6.1.10

Fabrication, Transportation and supply of hot-dip PU Paint
finish Curved Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs Mounting height Curved Pole having dimensions Bottom 180 mm,. Top 85mm with 3mm thick, base plate 400 x 400 x 20mm and 4 Nos of M24 x 750 long 'J' bolts along with templates. Including Supply of 0.2M long Single arm bracket.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper

Galvanized

1 No

22300

Galvanized PU paint finshed

1 No

30200

POLE BRACKETS

330

ELEC-6.1.11

Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

1300

331

ELEC-6.1.12

Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

1720

332

ELEC-6.1.13

Fabrication, Transportation and supply of 1 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

1610

333

ELEC-6.1.14

Fabrication, Transportation and supply of 1.50 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

2900

334

ELEC-6.1.15

Fabrication, Transportation and supply of 1.5 Mtr Length Single Arm suitable size decorative galvanized Bracket with PU paint colour finish etc complete.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

4800

335

ELEC-6.1.16

Fabrication, Transportation and supply of 1.5 Mtr Length Double Arm suitable size decorative galvanized Bracket with PU paint colour finish etc complete.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

9100

336

ELEC-6.1.17

Fabrication, Transportation and supply of of 1.5mtrs sword type or any decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

5300

337

ELEC-6.1.18

Fabrication, Transportation and supply of of 1.5mtrs sword type or any decorative Single arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

4100

338

ELEC-6.1.19

Fabrication, Transportation and supply of of 1.0mtrs sword type or any decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

4300

339

ELEC-6.1.20

Fabrication, Transportation and supply of of 1.0 mtrs sword type or any decorative Single arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

3600

HIGH MAST POLES

340

ELEC-6.1.21

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

105000

341

ELEC-6.1.22

Fabrication, transportation and supply of 16 Mtrs Polygon High Mast with two sections of Bottom 4mm thick and Top section with 3mm thick with GLS type aviation lamp of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 560mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

138000

342

ELEC-6.1.23

Fabrication, transportation and supply of 20 Mtrs Polygon High Mast with two sections of Bottom 4mm thick and Top section with 3mm thick of Bottom 460mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories.
Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M30 x 750 mm foundation bolts of required quantity with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper

1 No

178500

FEEDER PILLAR BOXES

343

ELEC-6.1.24

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.

1 No

18300

344

ELEC-6.1.25

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring , contactor, connectors and provision for energy meter etc., complete for finished item of work.

1 No

18900

ERRECTION- HIGH MAST POLES

345

ELEC-6.1.26

Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade
concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.

1 No

28400

346

ELEC-6.1.27

Earth work exacavation with a approximate quantity of 6.0 Cum for errection of 16 Mtrs high mast and refilling with a quantity of 0.65 Cum of PCC 1:4:8, 2.60 Cum M 20 grade
concrete and (110 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.

1 No

35500

347

ELEC-6.1.28

Earth work exacavation with a approximate quantity of 7.0 Cum for errection of 20 Mtrs high mast and refilling with a quantity of 0.75 Cum of PCC 1:4:8, 3.60 Cum M20 grade
concrete and (140 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.

1 No

45600

348

ELEC-6.1.29

Supply of ……. Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including terminals etc., complete (sizes in mm) Make : Hensel/Sadhrish

155 X 210 X 92

1 No

1650

205 X 255 X112

1 No

2400

225 X 295 X 122

1 No

8450

255 X 600 X 170

1 No

9300

FOUNDATION AND ERRECTION CHARGES OF POLES

349

ELEC-6.1.30

Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc.complete as directed by the department officers.

1 Job

4200

350

ELEC-6.1.31

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.

1 Job

4900

351

ELEC-6.1.32

Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and
cost and conveyance of materials etc.complete.

1 Job

6600

352

ELEC-6.1.33

Foundation and erection charges with special T&P, for 12Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.67Mtr x 0.67Mtrs x 1.50 Mtr size M20 cc work vibrated concreting mixing withnecessary steel (20kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.

1 Job

8100

GRP POLES

353

ELEC-6.1.34

Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip/Helipole

…do…. 3.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

8500

…do…. 4.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

10800

…do…. 6.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

13500

…do…. 8.00 Mtrs height, Bottom dia 193mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

17400

…do…. 9.00 Mtrs height, Bottom dia 210mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

19000

…do…. 10.00 Mtrs height, Bottom dia 227mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr

1 No

27500

354

ELEC-6.1.35

Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole

…do…. For 3.00 Mtrs Pole

1 No

1550

…do…. For 4.00 Mtrs Pole

1 No

1550

…do…. For 6.00 Mtrs Pole

1 No

1850

…do…. For 8.00 Mtrs Pole

1 No

2150

…do…. For 9.00 Mtrs Pole

1 No

4100

…do…. For 10.00 Mtrs Pole

1 No

5100

6.2

LT PANEL AND ACCESSORIES

355

ELEC-6.2.1

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

1 sqm

4250

356

ELEC-6.2.2

Supply and fixing of…………….. bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves

Electrolytic grade aluminium bus bar

375

Electrolytic grade copper bus bar

750

357

ELEC-6.2.3

Supply and Fixing of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves
/ channel etc. as required.Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec

Analog type ( 96 mm x 96 mm )

1 No

850

Digital type

1 No

1900

358

ELEC-6.2.4

Supply and Fixing of CT operated direct reading type Ammeter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Make: Conzerve/Elmeasure/ Meco/HPL/L&T/Schneider/AE/Socomec

Analog type ( 96 mm x 96 mm )

Below 500 A

1 No

850

Above 500A

1 No

850

Digital type

Below 500 A

1 No

1900

Above 500 A

1 No

1900

359

ELEC-6.2.5

Supply and Fixing of Current Transformer , with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/Seimens/C&S/Schneider

up to 150 / 5 Ratio , 5 VA , class 1 accuracy

1 No

475

from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy

1 No

700

from 500 / 5 to 1600/5 Ratio , 15 VA , class 1 accuracy

1 No

950

from 2000 / 5 to 3200 /5 Ratio , 15 VA, class 1 accuracy

1 No

1500

360

ELEC-6.2.6

Supply and Fixing of selector switch for voltmeter (4 position ) including making connection etc. as required Make: L&T /C&S/SALZER/HPL

1 No

340

361

ELEC-6.2.7

Supply and Fixing of CT linked selector switch of 10 A for Ampere meter (4position ) including making connection etc. as requiredMake: L&T
/C&S/SALZER/HPL

1 No

375

362

ELEC-6.2.8

Supply and fixing of single phase Electronic energy Meter,… AC,50
HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board. Makes: CONZERVE / ELMEASURE / MECO / HPL / HAVELLS/L&T.

Single Phase

1 No

1000

Three Phase

1 No

2800

363

ELEC-6.2.9

Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamp with integral circuit, terminal block, including connection etc. as required

Red/yellow/Green colour

1 No

120

Blue colour

1 No

200

364

ELEC-6.2.10

Supply and Fixing of Tap-off boxes suitable for following size of approved design

up to 95 sq. mm.( 3.5/4 core )

1 No

400

from 120 sq. mm. to 185 sq. mm.( 3.5/4 core )

1 No

700

365

ELEC-6.2.11

Supply and Fixing of energy analyser (multy function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/ HV network, RS 485
communication port etc. complete in all respect.

1 No

10500

366

ELEC-6.2.12

Supply Installation Testing and commissioning of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as
required.Makes: L&T/Seimens/Epcos/Schneider/Havells

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank)

1 KVAR

200

Heavy duty Three phase 440 V , 50 Hz capacitor (Bank)

1 KVAR

300

367

ELEC-6.2.13

Supply Installation Testing and commissioning of microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and following way, self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required Makes: L&T/Seimens/Epcos /Schneider/ ABB/Neptune

6 to 14 stage - sensitivity upto 50 milli Amp

1 No

18500

368

ELEC-6.2.14

Supply and Fixing of Cam operated rotary switches on existing panel with 2 way and off position makes: L&T (SALZER)/ABB/Schneider/Seimens/C&S/HPL

one pole

16 A

1 No

350

32 A

1 No

450

63 A

1 No

650

Two pole

16 A

1 No

400

32 A

1 No

530

63 A

1 No

875

Three pole

16 A

1 No

500

32 A

1 No

700

63 A

1 No

1250

Four pole

16 A

1 No

500

32 A

1 No

750

63 A

1 No

1400

369

ELEC-6.2.15

Supply and Fixing of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, Din rail mounting type including making connections, testing etc. as required Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells

3 pole AC3 Rating contactors

Up to 12 Amp

1 No

800

13 to 32 Amp

1 No

1325

35 to 40 Amp

1 No

1600

41 to 50 Amp

1 No

3500

4 pole AC 1 Rating contactors

Up to 25 Amp

1 No

1000

26 to 32 Amp

1 No

1200

33 to 45 Amp

1 No

2000

46 to 60 Amp

1 No

4200

370

ELEC-6.2.16

Supply and Fixing of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick dischargedamping resistors/ reactors to limit the inrush current
,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making onnections, testing etc. as required. suitable for following capacity capacitor bank Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells

Up to 6 KVAR

1 No

1600

7 to 10 KVAR

1 No

1800

11 to 20 KVAR

1 No

2700

21 to 25 KVAR

1 No

3600

30 KVAR

1 No

5200

40 KVAR

1 No

8300

50 KVAR

1 No

9600

371

ELEC-6.2.17

Supply and Fixing of thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells

Up to 14 A

1 No

1200

15 to 20 A

1 No

1600

21 to 30 A

1 No

2300

31 to 40 A

1 No

2600

372

ELEC-6.2.18

Supply and Fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL

Non luminous type

1 No

Luminous type

1 No

130

6.3

SUB STATION EQUIPMENT AND TRANSFORMERS

373

ELEC-6.3.1

Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following:

1 No

24000

(i) Provision for fixing Trivector Meter (To be supplied by DISCOMs)

(ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs)

(iii)TT Block

(iv) 6mm Bakelite sheet on all sides.

ELEC-6.3.1a

Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc complete for finished item of work.
a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC.
b) HT HRC fuse upto 63A - 3 nos.
c) Bus bar connection.
d) Indication lamps.
e) Manual trip Push buttion.
Make:ABB/ Megawin/Amara Raja/L&T

120000

33 KV HT Panel (drawout type)

374

ELEC-6.3.2

Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, 33 KV 800A VCB Panel with 3 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 31.5kA/3sec short circuit withstand capacity & 31.5kA/1sec Internal Arc capacity. Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271-200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 sqmm XLPE 33 kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.
(Note - Cost of end termination not included in this item.) Makes:ABB/Schneider/Seimens/Kirlos kar/Amara Raja/Megawin/L&T

1No

2655000

INCOMER 1 No. each comprising the following

1 No. 800 Amp. VCB. 31.5KA

1 No. Integral Earth switch for line side earthing

3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

3 No. Cast Resin 33000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB.

1 No. Digital voltmeter with selector switch.

1 No. Digital Ammeter with selector switch.

1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.

1 No. Multi-function meter.

Set of MCBs for Panel AC/DC

Set of MCBs for Main AC/DC

Set of Indication lamps LED types

TNC Switch, L-R Switch, Pushbuttons for ON-OFF

OUTGOING 2 Nos. each comprising the following

1 No. 800 Amp. VCB.31.5KA

1 No. Integral Earth switch for line side earthing

3 No. dual core CTs 300A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

1 No. Digital Ammeter with selector switch.

1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.

Set of MCBs for Panel AC/DC

Set of Indication lamps LED types

TNC Switch, L-R Switch, Pushbuttons for ON-OFF

11KV HT Panel (drawout type)

375

ELEC-6.3.3

Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, 11 KV 800A VCB Panel with 3 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity. Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271-200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 sqmm XLPE 11kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.
(Note - Cost of end termination not included in this item.) Makes:ABB/Schneider/Seimens/Kirlos kar/Amara Raja/Megawin/L&T

1No

1345000

INCOMER 1 No. each comprising the following

1 No. 800 Amp. VCB. 26.3KA

1 No. Integral Earth switch for line side earthing

3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

3 No. Cast Resin 11000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB.

1 No. Digital voltmeter with selector switch.

1 No. Digital Ammeter with selector switch.

1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.

1 No. Multi-function meter.

Set of MCBs for Panel AC/DC

Set of MCBs for Main AC/DC

Set of Indication lamps LED types

TNC Switch, L-R Switch, Pushbuttons for ON-OFF

OUTGOING 2 Nos. comprising the following

1 No. 800 Amp. VCB. 26.3KA

1 No. Integral Earth switch for line side earthing

3 No. dual core CTs 300A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

1 No. Digital Ammeter with selector switch.

1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.

Set of MCBs for Panel AC/DC

Set of Indication lamps LED types

TNC Switch, L-R Switch, Pushbuttons for ON-OFF

Oil Immersed TRANSFORMERS

376

ELEC-6.3.4

Supply and Transportation of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 33 KV as per energy efficiency level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC) etc., complete
and as per the following continuous rating Make:ABB/ALSTOM/SEIMENS/Kirloskar/Voltamp/ Esennar/KPEL

630 KVA

1 No

980000

1000 KVA

1 No

1250000

1250 KVA

1 No

1500000

1600 KVA

1 No

1860000

2000 KVA

1 No

2300000

377

ELEC-6.3.5

Supply and Transportation of ISI marked copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONANtype , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)
+10% to -10%, etc., complete and as per the following continuous rating Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/ KPEL/ Powertech

100 KVA

1 No

325500

160 KVA

1 No

550000

250 KVA

1 No

650000

315 KVA

1 No

800000

500 KVA

1 No

1050000

630 KVA

1 No

1130000

1000 KVA

1 No

1480000

Dry Type transformers

378

ELEC-6.3.6

Supply ,Transportation of cast Resin (Dry Type) indoor type copper double wound 33KV/0.433 KV, Three Phase 50 HzTransformers desingned and manufactured as per IS 11171/IEC 60726 , ANSI and NEMA Standards with all standard fittings,connected Delta on Primary side and Star on Secondary side with additional neutral brought out on load side 33000/433V with HV off load tap changing +5% to -15% temperature rise by the resistance 90 degrees with terminal arrangement Cable box on HV side and Bus duct on LV Side with off circuit Tap links etc.,, complete Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Voltamp/ Esennar

1000 KVA

1 No

2650000

1250 KVA

1 No

3300000

1600 KVA

1 No

3990000

2000 KVA

1 No

4800000

2500 KVA

1 No

5400000

379

ELEC-6.3.7

Supply ,Transportation of cast Resin (Dry Type) indoor type copper double wound 11KV/0.433 KV, Three Phase 50 HzTransformers desingned and manufactured as per IS 11171/IEC 60726 , ANSI and NEMA Standards with all standard fittings,connected Delta on Primary side and Star on Secondary side with additional neutral brought out on load side 11000/433V with HV off load tap changing +5% to -15% temperature rise by the resistance 90 degrees with terminal arrangement Cable box on HV side and Bus duct on LV Side , with off circuit Tap links etc.,, complete .
Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Voltamp/ Esennar

250 KVA

1 No

651000

315 KVA

1 No

756000

500 KVA

1 No

918000

630 KVA

1 No

1102500

750 KVA

1 No

1260000

1000 KVA

1 No

6.4

MAINTENANCE AND REPAIRS OF TRANSFORMERS

380

ELEC-6.4.1

Carryout routine maintenance, servicing and testing of 630A to 1000A L.T.ACB by cleaning fixed contacts, moving contacts and arcchutes including servicing and putting the ACB in perfect working condition after detting all relay and ON, OFF mechanism etc done with only manufacturing companies

1 No

5000

381

ELEC-6.4.2

Carryout routine maintenance and servicing of LT.Cubical pannel board having approximately 15 to 22 Nos of switches cleaning with power blower and servicing the contacts, tightning the connection of incoming and outgoing cables, and checking the operating machanism for smooth functioning of switches and putting them in smooth working condition.

1 No

3000

382

ELEC-6.4.3

Routine maintenance of transformer, including testing of insulation resistance, oil break down strength. Reconditioning / replacement of silicazel, cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil).

1 No

4500

383

ELEC-6.4.4

Testing of Transformer oil for dielectric breakdown strength.

1 No

600

384

ELEC-6.4.5

Removing the existing transformer from the plinth / Pole and refixing the standby transformer of following capacity including connections etc., complete………….

up to 315 KVA

1 No

3500

500 / 1000 KVA

1 No

4500

385

ELEC-6.4.6

Replacing old and unserviceable gasket of top cover plate of transformer having following capacity. -…………

up to 315 KVA

1 No

750

500 / 1000 KVA

1 No

1000

386

ELEC-6.4.7

Replacing old and unserviceable gasket of bushing for the following Transformer capacity. -………….

up to 315 KVA HT,

1 No

350

500 / 1000 KVA HT,

1 No

750

up to 315 KVA LT,

1 No

900

500 / 1000 KVA LT,

1 No

1500

387

ELEC-6.4.8

Replacement the H T / L. T burntout winding coils of distribution transformer including rewinding, varnishing and vaccuming etc.,duly retaining the removed burnt winding coils by the Contractor / Firm- …….

For copper coils

1 Kg

600

For aluminium coils

1 Kg

400

387

ELEC-6.4.9

Insulating HT / LT copper / aluminium coils for Transformers.

1 Kg

325

388

ELEC-6.4.10

Painting to transformer with 2 coats Zinchromate red oxide duly scraping existing paint followed by 2 coats of hammerton grey paint etc., complete. -……….

Upto 500 KVA

1 No

3500

630 / 1000 KVA

1 No

4500

389

ELEC-6.4.11

Replacing for distribution Transformer by new
one.

H.T bushing

1 No

350

H.T bushing with metal parts

1 No

400

L.T bushing Upto 315 KVA

1 No

200

L.T bushing 500 / 1000 KVA

1 No

250

L.T bushing rod with metal parts up to 315 KVA

1 No

500

L.T bushing rod with metal parts 500/1000 KVA

1 No

1850

390

ELEC-6.4.12

Drying the repaired transformer with appropriate heat / air of following capacity of transformers. ……..-

Upto 315 KVA

1 No

4400

500 / 1000KVA

1 No

5500

391

ELEC-6.4.13

Loading, transportation and Unloading of transformer from site to Workshop or vice verse. ………

Upto 500 KVA

1 No

4500

630 / 1000 KVA

1 No

7000

392

ELEC-6.4.14

Supply of new and tested transformer oil as per IS-335 - 1972 (per Ltr)

1 Ltr

120

393

ELEC-6.4.15

Filteration of transformer oil as per ISS specifications filters to dielectric strength above 40KV ……..

at site. (per Ltr) excluding transportation

1 Ltr

at workshop (per Ltr)

1 Ltr

6.5

OVERHEAD LINES& LINE MATERIALS

394

ELEC-6.5.1

Supply and transportation of PSCC Poles

8.0 Mtr ,Working load-140 Kgs

1No

2150

8.0 Mtr ,Working load-200 Kgs

1No

2275

9.1 Mtr ,Working load-280 Kgs

1No

4150

395

ELEC-6.5.2

Supply and transportation of 9 mtr length RS Joist Poles

150 x 75 mm(Wt of the pole-140 Kgs)

1No

8600

175 x 85 mm(Wt of the pole-215Kgs)

1No

13250

150 x 150 mm(Wt of the pole-333 Kgs)

1No

20500

396

ELEC-6.5.3

Supply and errection of GI stay set of dia including stay clamps ,
turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc.,complete

20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm

1 set

1850

16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm

1 set

1400

397

ELEC-6.5.4

Supply and fixing of 11KV -V- cross arms with duly welded
with necessary clamping arrangements etc., complete

75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs)

1 No

1200

65 x65 x6 MS angle (8.2 Kgs)

1 No

850

398

ELEC-6.5.5

Supply and fixing of LT 3 phase 4 wire cross arm of length 3' 8" with……. and necessary clamping arrangements ,cutting ,drilling and welding etc., complete

50 x 50 x6 mm MS angle ( wt 5.75 Kgs)

1 No

415

65 x65 x6 MS angle (wt 7 Kgs)

1 No

490

399

ELEC-6.5.6

Supply and fixing of LT 3 phase 5 wire cross arm of length 4' 5" with……. and necessary clamping arrangements ,cutting ,drilling and welding etc., complete

50 x 50 x6 mm MS angle ( wt 7.30Kgs)

1 No

535

65 x65 x6 MS angle (wt 9.60 Kgs)

1 No

675

400

ELEC-6.5.7

Supply and fixing of LT single phase 3 wire cross arm with 50 x 50 x6 mm MS angle of 2' 5" ( wt 4.20 Kgs ) and necessary clamping arrangements ,cutting
,drilling and welding etc., complete

330

401

ELEC-6.5.8

Supply and fixing of 11 KV pin Insulator (IS 731/1971 ) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc.,

each

200

402

ELEC-6.5.9

Supply and fixing of LT pocelain pininsulator as per IS 1447-1997
suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,

100 x 65 mm

each

100 x 85 mm

each

403

ELEC-6.5.10

Supply and fixing of LT pocelain shackle insulator as per IS 1443-
1979 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,

75 x 90 mm

each

140

100 x 110 mm

each

170

404

ELEC-6.5.11

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure

each

2500

405

ELEC-6.5.12

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 nos 24 KV
/22 KV post Insulators( IS 5350, Hot dipped Hard ware, fuse wire of required size etc., complete

each

5500

406

ELEC-6.5.13

Supply and fixing of 11 KV danger plates on the existing poles

each

100

407

ELEC-6.5.14

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade,gang operated ,Hozizontal type,operating mechanism with GI spring loaded reverse loop type fixed contact,solid HD electrolytic copper tubular moving contact with silver/Nicle plated at end points,9 Nos post insulators of 12 Kv(IS 2594 and IS 5350) ,Hot Dip galvenizing hardware,GI pipe,Nuts and bolts etc., complete.,

each

18000

408

ELEC-6.5.15

Supply and Transportation of Over Head …………. Conductor as per IS 398 (PART - II) : 1996

7/3.55 ACSR Rabbit (214 Kg/KM)

1KM

7/2.59 ACSR weasel (128 Kg/KM)

1KM

7/2.11 ACSR squirrel (85 Kg/KM)

1KM

100 sqmm AAA

1KM

50953

55 sqmm AAA

1KM

29490

34 sqmm AAA

1KM

17685

409

ELEC-6.5.16

Supply and errecting fencing section having size 2045 mt height from ground level and 1.2 mt width by using angle iron size 50 x50 x6 mm errected in cc foundation 15 x15x40 cm deep . The section of the frame shall be fitted with flat iron support of size 25 x 6 mm on top , bottom an dmid way and chain link jolley of 3.26 mm dia /10 SWG GI hard wire mesh of 50 x50 mm to the angle iron at every distance of 30 cm , by iron studs complete duly painted with one coat of red oxide and 2 coats of aluminium paint,

1 No

As per DATA

410

ELEC-6.5.17

Supply and errecting double leaf hinged door each 150 cm in width and 180 cm in height using 40 mm dia B grade ISI mark GI pipe from all 4 sides with necessary bends and cross supports of angle iron 45 X45 X5 mm with the door leaf covered with chain links jolley 50 X 50 mm made from
3.26 mm dia/10 SWG Gi wire with necessary flat iron covering all round with necessary no of spikes of size 10 mm dia at top and bottom at 150 mm apart to match the height of fencing. The door shall have latches and side channel of 100 X50 X5 mm regidly welded for providing locking arrangement Godrej/Navtal make medium size lock with duplicate keys, fencing completely errected and painted with anti corrosive red oxide paint and 2 coats of prescribed enamel paint/silver paint. The Channel iron of size 150X75 mm by
2.5 mtr long shall be provided and errected at both sides of gate.

1 No

As per DATA

411

ELEC-6.5.18

Supply and errecting 50 X50X6 mm angle iron corner support 0.5 mt way from the fence supports fixed at the middle fencing frame and other side in cc foundation 15 X15X 40 cm complete duly painted with 1 coat of red oxide and 2 coats of alluminum paint.

1 No

As per DATA

412

ELEC-6.5.19

Providing and spreading HBG metal of size 40 mm size for 100 mm depth above the ground level.

As per DATA

ELEC-6.5.20

Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete.

1 No

10000

ELEC-6.5.21

Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete.

1 No

6000

6.6

LIGHTENING PROTECTIVE SYSTEM

Advanced LPS

ELEC-6.6.1 a

Supply of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high-quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t = 30µs,
Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current
Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of 25mm.
Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND

1 No

95000

ELEC-6.6.1 b

Supply of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high-quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t = 50µs,
Protection Radius ranging from 68 Meters in Level-I to 95 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current
Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of 25mm.
Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND

1 No

100000

413

ELEC-6.6.1 c

Supply of ESE Air Terminal of external wide area of protection system based on proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high-quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance t = 60µs,
Protection Radius ranging from 79 Meters in Level-I to 107 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current
Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of
25mm.
Make :
THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND

1 No

114000

414

ELEC-6.6.2

Installation and commissioning of advanced lighting protection systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of GI Mast with stay wire.
6. Installation of Earth Electrodes
7. Interconnection between the

1 No

29000

Electrodes
8. Termination of down conductor to earth bus etc
complete.

415

ELEC-6.6.3

Supply of 6 Digit Electronic/Mechanical counter Make: EARTHPLUS (THUNDER GUARD) / NIMBUS / KALRE / FOREND

1 No

15000

416

ELEC-6.6.4

Supply of G.I mast of 5 Meters length, 50 mm Dia, with FRP Collar (Insulating Bush) Base Plate & Complete Fitting Accessories with Supporting Guy Wire (Stay Wires) and all fitting accessories

1 Set

6000

418

ELEC-6.6.5

Supply of IEC 62561-7 compliant Eco- friendly, Maintenance free, anti- corrosive, lead-free, super conductive, mineral based high-grade earthing compound, To enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, Should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag
Make: EARTHPLUS /CIRPROTEC / INDALAC / INGESCO

1 No

2200

419

ELEC-6.6.6

Supply of Bentonite Moisture Retaining Powder
30 Kg Bag

1 No

170

420

ELEC-6.6.7

Supply of Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs

1 No

1500

CONVENTIONAL LPS AS PER IS/IEC 62305

Air Terminal

421

ELEC-6.6.8

Supply, installation, testing and commissioning of 8 mm Aluminum Round Conductor complete as per requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305
(IS/IEC 62305)

1 RM

422

ELEC-6.6.9

Supply, installation, testing and commissioning of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.
Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance

each

423

ELEC-6.6.10

Supply, installation, testing and commissioning of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost- resistant concrete). Sleeve from polyethylene, black @ 1 meter distance.

each

130

424

ELEC-6.6.11

Supply, installation, testing and commissioning of Fang Fix Junior system - Inclusive of Al intrception rod of 1Mtr length(10mm dia ) , Quick mounting of the interception rod in the base using plug technology

each

1650

425

ELEC-6.6.12

Supply, installation, testing and commissioning of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts

each

132

426

ELEC-6.6.13

Supply, installation, testing and commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU.Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high- grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC
62305)(2nos/expansion piece ).

each

395

DOWN CONDUCTOR

427

ELEC-6.6.14

Supply, installation, testing and commissioning of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2

1 RM

(VDE 0185 part 202) & VDE 0185-305
(IS/IEC 62305)

428

ELEC-6.6.15

each

429

ELEC-6.6.16

Supply, installation, testing and commissioning of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer

each

310

430

ELEC-6.6.17

Supply, installation, testing and commissioning of Lightnig counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6.

each

16500

6.7

EARTHING

431

ELEC-6.7.1

Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width : 320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity :
5000 Kgs

1 No

9500

432

ELEC-6.7.2

Providing earthling as per IS 3043 with perforated 3 mtr long 40 mm dia B class GI pipe including all accessories like nuts bolts reducer,nipple, wire meshed funnel andCCfinished chamber covered with hinged type with CI cover ,CI frame of size 300 X 300 mm and embodying the pipe complete with alternate layers of salt and coke
/charcoal/bentonite powder testing earth resistance as required etc., complete

1 No

As per DATA

433

ELEC-6.7.3

Providing earthling as per IS 3043 with GI earth plate of size 600 x600 x 6 mm by embodying 3 to 4 mtr nelow the ground level with 40 mm dia GI B class perforated pipe including all including all accessories like nuts bolts reducer,nipple, wire meshed funnel andCCfinished chamber covered with hinged type with CI cover ,CI frame of size 300 X 300 mm and embodying the pipe complete with alternate layers of salt and coke
/charcoal/bentonite powder testing earth resistance as required etc., complete

1 No

As per DATA