Electro Mechanical -5
| 9.5 | FIRE HYDRANT AND SPRINKLER SYSTEM | |||
| ELECTRIC DRIVEN MAIN FIRE PUMPS(SPLIT CASE) | ||||
| 615 | ELEC-9.5.1 | Supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as required | 1 Set | 320000 |
| a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 1620 lpm at 56 Mtr. head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| 616 | ELEC-9.5.2 | Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 360000 |
| a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr. head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| 617 | ELEC-9.5.3 | Supplying Installation, testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following Complete in all respect as required. | 560000 | |
| a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280 LPM and 120 Metres head conforming to IS 1520. | ||||
| b)Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. | ||||
| d)Suitable CC foundation of 1:2:4 ratio ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) duly plastered and with anti vibration pads Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| 618 | ELEC-9.5.4 | Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required. | 1 Set | 415000 |
| a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 70 Mtr. head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| ELEC-9.5.5 | Supplying Installation, testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following Complete in all respect as required. | 1 Set | 580000 | |
| a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2850 LPM and 120 Metres head conforming to IS 1520. | ||||
| b)Suitable HP SQ cage induction motor, TEFC, synchronous speed 1470 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. | ||||
| d)Suitable CC foundation of 1:2:4 ratio ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) duly plastered and with anti vibration pads | ||||
| DIESEL ENGINE DRIVEN FIRE PUMPS | ||||
| 619 | ELEC-9.5.6 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 416000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 1620 lpm at 56 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 620 | ELEC-9.5.7 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 600000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 621 | ELEC-9.5.8 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 725000 | |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 120 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 622 | ELEC-9.5.9 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 680000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 70 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 623 | ELEC-9.5.10 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 775000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 120 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| ELECTRIC DRIVEN MAIN FIRE PUMPS(END SUCTION) | ||||
| 624 | ELEC-9.5.11 | Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 240000 |
| a) End suction back pull out centrifugal pump, Std fitted with BRONZE IMPELLER & gland packing ,capacity 171 Cum/hr (2850 LPM) at total head 70 M at operating speed 2900 rpm. Pump duty as per TAC | ||||
| b) 55 KW / 75 HP, 3000 srpm, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class ‘F’ insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump. |
||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| 625 | ELEC 9.5.12 | Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 196000 |
| a) End suction back pull out centrifugal pump, Std fitted with BRONZE IMPELLER & gland packing ,capacity 137 Cum/hr (2280 LPM) at total head 70 mwc at operating speed 2900 rpm. Pump duty as per TAC | ||||
| b) 45 KW / 60 HP, 3000 srpm, TEFC (IP55) Horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class ‘F’ insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 225 M frame |
||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| 626 | ELEC 9.5.13 | Supplying, installation, Testing and commissioning of Electric engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 144000 | |
| a) End suction back pull out centrifugal pump, Std fitted with BRONZE IMPELLER & gland packing ,capacity 97 Cum/hr (1620 LPM) at total head 56 mwc at operating speed 2900 rpm. Pump duty as per TAC | ||||
| b) 30 KW / 40 HP, 3000 srpm, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class ‘F’ insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump. |
||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar |
||||
| DIESEL ENGINE DRIVEN MAIN FIRE PUMPS(END SUCTION) | ||||
| 627 | ELEC-9.5.14 | Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 499000 |
| a) End suction back pull out pump, Std fitted with BRONZE Impeller & gland packing, capable of delivering 171 Cum/hr(2850 LPM) at a total head of 70 M when operated at 1800 rpm and pump duty as per TAC | ||||
| b) Liquid cooled, 85 BHP at 1800 rpm, diesel engine (Radiator cooled) 12 Volts starting system with standard accessories | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 628 | ELEC-9.5.15 | Supplying, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 398000 |
| a) End suction back pull out pump, Std fitted with BRONZE Impeller & gland packing, capable of delivering 137 Cum/hr(2280 LPM) at a total head of 70 M when operated at 2150 rpm and pump duty as per TAC | ||||
| b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine (Radiator cooled) 12 Volts starting system with standard accessories | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| 629 | ELEC-9.5.16 | Supplying , installation, Testing and commissioning of Diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 348000 |
| a) End suction back pull out pump, Std fitted with BRONZE Impeller & gland packing, capable of delivering 97 Cum/hr(1620 LPM) at a total head of 56 M when operated at 2150 rpm and pump duty as per TAC | ||||
| b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator cooled) 12 Volts starting system with standard accessories | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt |
||||
| JOCKEY PUMPS | ||||
| 630 | ELEC-9.5.17 | Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 49000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 56 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ Kirloskar |
||||
| 631 | ELEC-9.5.18 | Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required | 1 Set | 72000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ Kirloskar |
||||
| 632 | ELEC-9.5.19 | Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required | 1set | 110000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 120 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ Kirloskar |
||||
| BOOSTER PUMPS | ||||
| 632 | ELEC-9.5.20 | Supplying , installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. | 1 Set | 56000 |
| a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45 Mtr head conforming to IS 1520 | ||||
| b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens / ABB / Kirloskar |
||||
| 633 | ELEC-9.5.21 | Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. | 1 Set | 43500 |
| a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45 Mtr head conforming to IS 1520 | ||||
| b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller and Gland Packing with 9.3 KW / 12.5HP, 2 pole, TEFC, 415 V, 3ph motor | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar |
||||
| 634 | ELEC-9.5.22 | Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. | 1 Set | 41500 |
| a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 750 lpm at 35 Mtr head conforming to IS 1520 | ||||
| b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller and Gland Packing with 7.5 KW / 10 HP, 2 pole, TEFC, 415 V, 3ph motor | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar |
||||
| 635 | ELEC-9.5.23 | Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. | 1 Set | 38200 |
| a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 450 lpm at 35 Mtr head conforming to IS 1520 | ||||
| b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller and Gland Packing with 5 KW / 7.5 HP, 2 pole, TEFC, 415 V, 3ph motor | ||||
| c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. | ||||
| d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar |
||||
| CONTROL PANELS | ||||
| ELEC-9.5.24 | Fabrication, supply,Transportation, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply. Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 215000 | |
| INCOMING : | ||||
| 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Digital Ammeter (0-250 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps | ||||
| Set of Copper Bus Bar 300A | ||||
| OUTGOING : | ||||
| ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) | ||||
| MAIN FIRE PUMP | ||||
| 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation selector switch for local/remote, auto/manual/OFF operation. | ||||
| JOCKEY PUMP | ||||
| 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for ocal/remote, auto/manual/OFF operation. | ||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Water Temp and Engine on indication. Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller. | ||||
| ELEC-9.5.25 | Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 253000 | |
| INCOMING : | ||||
| 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Ammeter (0-400 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip | ||||
| indicating lamps | ||||
| Set of Copper Bus Bar 500A | ||||
| OUTGOING : | ||||
| ( Note : All outgoing feeders for pumps should have | ||||
| digital Ammeter with selector switches, and LED type | ||||
| ON, OFF, trip indicating lamps) | ||||
| MAIN FIRE PUMP | ||||
| 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. | ||||
| JOCKEY PUMP | ||||
| 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. | ||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller | ||||
| ELEC-9.5.26 | Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications. Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 280000 | |
| INCOMING : | ||||
| 630A, 50kA 4 Pole MCCB, Ics=100% Icu rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Ammeter (0-630 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip | ||||
| indicating lamps | ||||
| Set of Copper Bus Bar 800Amps | ||||
| OUT GOING : | ||||
| ( Note : All outgoing feeders for pumps should have | ||||
| digital Ammeter with selector switches, and LED type | ||||
| ON, OFF, trip indicating lamps) | ||||
| MAIN FIRE PUMP | ||||
| 250 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. | ||||
| JOCKEY PUMP | ||||
| 125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with over load protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. | ||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller. | ||||
| ELEC-9.5.27 | Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 328000 | |
| INCOMING : | ||||
| 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Ammeter (0-400 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip | ||||
| indicating lamps | ||||
| Set of Copper Bus Bar 500Amps | ||||
| OUT GOING : | ||||
| ( Note : All outgoing feeders for pumps should have | ||||
| digital Ammeter with selector switches, and LED type | ||||
| ON, OFF, trip indicating lamps) | ||||
| MAIN FIRE PUMPS | ||||
| 125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets |
||||
| JOCKEY PUMP | ||||
| 63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets |
||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indi Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller | ||||
| ELEC-9.5.28 | Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 392000 | |
| INCOMING : | ||||
| 630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Ammeter (0-630 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip | ||||
| indicating lamps | ||||
| Set of Copper Bus Bar 800Amps | ||||
| OUT GOING : | ||||
| (Note : All outgoing feeders for pumps should have | ||||
| digital Ammeter with selector switches, and LED type | ||||
| ON, OFF, trip indicating lamps) | ||||
| MAIN FIRE PUMP | ||||
| 200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets |
||||
| JOCKEY PUMP | ||||
| 100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets |
||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller. | ||||
| ELEC-9.5.29 | Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification Makes of MCCBs : L&T / Siemens / Legrand / Schneider / ABB / Hager Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens |
1 No | 500000 | |
| INCOMING : | ||||
| 800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating |
||||
| Digital Voltmeter 0-500V with selector switch | ||||
| Ammeter (0-800 A) with selector swtich & CTs etc. | ||||
| LED type RYB phase indicating lamps, ON, OFF, trip | ||||
| indicating lamps | ||||
| Set of Copper Bus Bar 1000Amps | ||||
| OUT GOING : | ||||
| ( Note : All outgoing feeders for pumps should have | ||||
| digital Ammeter with selector switches, and LED type | ||||
| ON, OFF, trip indicating lamps) | ||||
| Main Fire Pump | ||||
| 250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 sets | ||||
| JOCKEY PUMP | ||||
| 125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets |
||||
| DIESEL ENGINE CONTROL | ||||
| Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller | ||||
| MS PIPES | ||||
| 636 | ELEC-9.5.30 | Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes: Jindal / Hissar / Tata pipes/Prakash Surya |
||
| C-CLASS MS PIPES | ||||
| a | 250 mm dia | 1 Mtr | 3400 | |
| b | 200 mm dia | 1 Mtr | 2950 | |
| c | 150 mm dia | 1 Mtr | 2250 | |
| d | 100 mm dia | 1 Mtr | 1400 | |
| e | 80 mm dia | 1 Mtr | 930 | |
| f | 65 mm dia | 1 Mtr | 700 | |
| g | 50 mm dia | 1 Mtr | 560 | |
| h | 40 mm dia | 1 Mtr | 475 | |
| i | 32 mm dia | 1 Mtr | 375 | |
| j | 25 mm dia | 1 Mtr | 280 | |
| B- CLASS MS PIPES | ||||
| a | 250 mm dia | 1 Mtr | 3000 | |
| b | 200 mm dia | 1 Mtr | 2600 | |
| c | 150 mm dia | 1 Mtr | 1800 | |
| d | 100 mm dia | 1 Mtr | 1200 | |
| e | 80 mm dia | 1 Mtr | 850 | |
| f | 65 mm dia | 1 Mtr | 630 | |
| g | 50 mm dia | 1 Mtr | 490 | |
| h | 40 mm dia | 1 Mtr | 370 | |
| i | 32 mm dia | 1 Mtr | 300 | |
| j | 25 mm dia | 1 Mtr | 250 | |
| 637 | ELEC-9.5.31 | Supplying and fixing single headed Internal / External hydrant valve with instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. Makes: Newage/ Winco/ Padmini / Safex/Minimax/ Newtech/Honeywell |
||
| a | Single Headed Gun Metal | 1 No | 7300 | |
| b | Single Headed Stainless Steel | 1 No | 6500 | |
| 638 | ELEC-9.5.32 | Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell | ||
| a | (a) 250 mm . dia | 1 No | 11500 | |
| b | (b) 200 mm . dia | 1 No | 4900 | |
| c | (c) 150 mm dia | 1 No | 4100 | |
| d | (d) 100 mm dia | 1 No | 3150 | |
| e | (e) 80 mm dia | 1 No | 2900 | |
| 639 | ELEC-9.5.33 | Providing, installation, testing and commissioning of dual Plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell |
||
| a | a) 250mm dia | 1 No | 18000 | |
| b | (b) 200 mm dia | 1 No | 9200 | |
| c | (c) 150 mm dia | 1 No | 6600 | |
| d | (d) 100 mm dia | 1 No | 3500 | |
| e | (e) 80 mm dia | 1 No | 3400 | |
| f | (f) 50 mm dia | 1 No | 1800 | |
| 640 | ELEC-9.5.34 | Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell |
||
| a | 250 mm . dia | 1 No | 15300 | |
| b | 200 mm . dia | 1 No | 11000 | |
| c | 150 mm dia | 1 No | 7000 | |
| d | 100 mm dia | 1 No | 4700 | |
| e | 80 mm dia | 1 No | 3500 | |
| f | (50 mm dia | 1 No | 2800 | |
| 641 | ELEC-9.5.35 | Providing, installation, testing and commissioning of gun metal valves of following sizes as required. Make: NEU-G/Zolotto/Padmini/SANT/Honeywell |
||
| a | 50 mm dia | 1 No | 1600 | |
| b | 40 mm dia | 1 No | 1300 | |
| c | 32 mm dia | 1 No | 1175 | |
| 642 | ELEC-9.5.36 | Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell |
||
| a | Gun metal | 1 No | 5630 | |
| b | SS couplings | 1 No | 4200 | |
| 643 | ELEC-9.5.37 | Supplying and fixing 63mm dia, 15 mtr long CP hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell |
||
| a | Gun metal | 1 No | 4800 | |
| b | SS couplings | 1 No | 4000 | |
| 644 | ELEC-9.5.38 | Supply, installation, testing and commissioning of stainless steel Y – Stainer fabricated outof 1.6 mm thick SS 304 with following sizes confirming to IS specifications complete with rubber gasket, GI bolts , nuts, washers etc as required Makes: Leader / Zolotto/SANT/Honeywell. | ||
| a | 250mm dia | 1 No | 18400 | |
| b | 200 mm . dia | 1 No | 17000 | |
| c | 150 mm dia | 1 No | 8000 | |
| d | 100 mm dia | 1 No | 4300 | |
| e | 80 mm dia | 1 No | 3900 | |
| 645 | ELEC-9.5.39 | Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. | 1 No | 6700 |
| a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Makes: Reliance/ Newage/ Safex/NewTech/Winco/Minimax |
||||
| b) 20mm (Nominal internal) dia gun metal ball/gate valve and nozzle. Makes:NEU-G/SANT / Safex. | ||||
| c) Drum and brackets for fixing the equipments on wall. | ||||
| d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe. | ||||
| 646 | ELEC-9.5.40 | Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. makes:Minimax/Safex/Newage/Winco /Padmini/NewTech |
1 No | 2900 |
| 647 | ELEC-9.5.41 | Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech |
||
| a | Gun metal | 1 No | 2200 | |
| b | SS couplings | 1 No | 1600 | |
| 648 | ELEC-9.5.42 | Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / | 1 No | 8000 |
| Minimax/NewTech/Honeywell | ||||
| 649 | ELEC-9.5.43 | Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell | 1 No | 6000 |
| 650 | ELEC-9.5.44 | Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. | 1 No | 14300 |
| 651 | ELEC-9.5.45 | Providing fixing, testing and commissioning of 15mm size quartzoid bulb type sprinklers of rating 68º C. pendent / side wall with required accessories. Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX |
1 No | 440 |
| 652 | ELEC-9.5.46 | Supply fixing, testing and commissioning of UL approved flexible dropper of 1.5 mtr length with required accessories Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX |
1 No | 1050 |
| 653 | ELEC-9.5.47 | Providing and fixing of Pressure Switch in the MS pipe Line including connection etc as required. Makes : Danfoss / Indfoss /Systemsensor/Honeywell |
1 No | 2250 |
| 654 | ELEC-9.5.48 | Providing and fixing Flow Switches in 100mm dia MS pipe. Makes : System Sensor / Switzer /Honeywell |
1 No | 4800 |
| 655 | ELEC-9.5.49 | Providing and fixing Flow Switches in 150 mm dia MS pipe. Makes : System Sensor / Switzer /Honeywell |
1 No | 6700 |
| 656 | ELEC-9.5.50 | Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. MAKES: HGURU / FIEBIG | 1 No | 600 |
| 657 | ELEC-9.5.51 | Supply, installation, testing and commissioning of 25mm dia Gate valve Makes : Zoloto / Leader / SANT/NEU- G |
1 No | 1050 |
| 658 | ELEC-9.5.52 | Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / SANT/NEU- G | 1 No | 580 |
| 659 | ELEC-9.5.53 | Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve Makes : Zoloto / Leader / SANT | 1 No | 1100 |
| ELEC-9.5.54 | Supply, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required Makes : Tyko/Newage/HD | |||
| a | 750mm to 800 mm | 1 No | 900 | |
| b | 1000 mm to 1200 mm | 1 No | 1050 | |
| c | 1500 mm | 1 No | 1250 | |
| 660 | ELEC-9.5.55 | Providing, fixing, testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Makes : HD / TYCO / NEWAGE |
||
| a | 80mm dia | 1 No | 36000 | |
| b | 100mm dia | 1 No | 38000 | |
| c | 150mm dia | 1 No | 40000 | |
| 661 | ELEC-9.5.56 | Supplying, installing, testing and commissioning of CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line. Makes:Normex /SANT |
||
| a | a) 200mm nominal dia | 1 Ea | 22300 | |
| b | b) 150mm nominal dia | 1 Ea | 12000 | |
| c | c) 100mm nominal dia | 1 Ea | 6700 | |
| d | d) 80mm nominal dia | 1 Ea | 4600 | |
| ELEC-9.5.57 | Supply and laying of 300mm dia NP2 RCC Hume pipe with Collars for Road crossings -As per Civil SoR | |||
| 662 | ELEC-9.5.58 | Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specificatios. Make:IWL(PIPE KOT) or its equivalent | ||
| a | a) 200mm nominal dia | 1 Mtr | 400 | |
| b | b) 150mm nominal dia | 1 Mtr | 300 | |
| c | c) 100mm nominal dia | 1 Mtr | 270 | |
| d | d) 80mm nominal dia | 1 Mtr | 230 | |
| 663 | ELEC-9.5.59 | Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting. | 1 Kg | 63 |
| SECTION 10 | ||||
| 10.1 | GENERATORS SPECIFICATION | |||
| 664 | ELEC-10.1.1 | Supply Installation Testing And commissioning of DG Set complete with 1500 RPM Diesel Engine of suitableBHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self regulated, self excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection( Over voltage, over speed & under voltage). DieselEngine: Itshall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel and AVM. The diesel engine shall be capable of providing 10% over load for 1 Hr for every 11 Hrs of continuious running at full load. Accoustic Enclosure: Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets.The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms,complete in all respect of following capacity : |
||
| Radiator Cooled and Turbocharged | ||||
| a | 15 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 340000 | |
| b | 30 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 440000 | |
| c | 40 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 548000 | |
| d | 62.5kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 630000 | |
| e | 125 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 825000 | |
| (a to e) | Engine Makes:Cummins/Koel Green/Sterling/ mahindra/Elmot Power Gen Alternator Make:Stamford/ Kirloskar/ CromptonGreaves /Leroysomer |
|||
| f | 160 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 1080000 | |
| g | DELETED | 1 No | ||
| h | 250 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 1450000 | |
| i | 320 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 2250000 | |
| j | 380 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 2870000 | |
| (f to j) | Engine Makes:Caterpillar/Cummins/Koel Green/Mahindra/Elmot power Gen Alternator Make:Leroy somer/Crompton Greaves/Stamford |
|||
| k | 500kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 3150000 | |
| l | 625 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 3800000 | |
| m | 750 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 4730000 | |
| n | 1000 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 5700000 | |
| o | 1250 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 7700000 | |
| p | 1500 kVA at 0.8 pf 415V 50Hz 3-Ø | 1 No | 8740000 | |
| (k to p) | Engine Makes:Caterpillar/Perkins/Cummins Alternator Make:Leroy somer/Crompton Greaves/Stamford |
|||
| 665 | ELEC-10.1.2 | Supply Installation Testing and Commissioning of AUTO MAINS FAILURE (AMF) Panel with IP 52 protection, fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine START & STOP commands,control RELAYS, selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter , Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: | ||
| PLC based AMF Panel | ||||
| a | 25 to 40 KVA | 1 No | 75000 | |
| b | 50 to 63.5 KVA | 1 No | 110000 | |
| c | 80 to 160 KVA | 1 No | 155000 | |
| d | 180 to 250 KVA | 1 No | 210000 | |
| e | 320 to 500 KVA | 1 No | 260000 | |
| Electro-Mechanical Relay Based AMF Panel | ||||
| f | 25 to 63.5 KVA | 1 No | 55000 | |
| g | 80 to 180 KVA | 1 No | 92500 | |
| h | 200 to 500 KVA | 1 No | 135000 | |
| 666 | ELEC-10.1.3 | Supply and fixing of Thermal Insulation With Asbestos Rope for Exhaust pipe | Mtr | 251 |
| 667 | ELEC-10.1.4 | Supply and fixing of Thermal Insulation With Rock/Glass Wool wwith Alluminium cladding (Density - 96 Kg/m3 thickness -50mm) for Exhaust pipe | Mtr | 1247 |
| SECTION 11 | ||||
| 11.1 | INVERTERS and ONLINE UPS SYSTEMS | |||
| 668 | ELEC-11.1.1 | Supply and installation of ……. Inverter(home UPS system) pure sine wave out put, single phase input / Single phase output. Makes: Exide / Amar Raja / Samhitha/ Microtek |
||
| a | 800 VA, 12 V DC | 1 No | 8500 | |
| b | 1400 VA, 24 V DC | 1No | 12000 | |
| c | 2000 VA, 36 V DC | 1No | 17000 | |
| 669 | ELEC-11.1.2 | Supply installation Testing and commissioning of KVA on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric/APC/Consul Neowatt/Sakshham /Emerson |
||
| a | 2.0 KVA , 72/96VDC | 1 No | 24000 | |
| b | 3.0 KVA , 72/96 VDC | 1 No | 33000 | |
| c | 3.0 KVA , 72/96 VDC with Isolation Transformer | 1 No | 37800 | |
| d | 6.0 KVA , 192/240 VDC with Isolation Transformer | 1 No | 65000 | |
| e | 7.0 KVA , 192/240 VDC with Isolation Transformer | 1 No | 78500 | |
| f | 10.0 KVA , 192-240 VDC with Isolation Transformer | 1 No | 94500 | |
| 670 | ELEC-11.1.3 | Supply installation Testing and commissioning of KVA on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions ,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave out put, double conversion ,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three phase output. Accoustic level shall be less than 58dB at 1 mtr distance. Makes: Numeric/APC/Consul Neowatt/Sakshham /Emerson |
||
| a | 10.0 KVA 312/360 V DC | 1 No | 165000 | |
| b | 15.0 KVA 312/360 V DC | 1 No | 180000 | |
| c | 20.0 KVA 312/360 V DC | 1 No | 210000 | |
| d | 30.0 KVA 312/360 V DC | 1 No | 275000 | |
| e | 40.0 KVA 312/360 V DC | 1 No | 350000 | |
| 671 | ELEC-11.1.4 | Supply installation Testing and commissioning of KVA on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions ,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave out put, double conversion ,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three phase output. Accoustic level shall be less than 58dB at 1 mtr distance. Makes: Mitsubishi/ Socomec /Schiender(APC)/ Legrand/Consul NeoWatt |
||
| a | 60 KVA | 1 No | 650000 | |
| b | 80.0 KVA | 1 No | 850000 | |
| c | 100.0 KVA | 1 No | 985000 | |
| d | 120.0 KVA | 1 No | 1118000 | |
| e | 160.0 KVA | 1 No | 1248000 | |
| f | 200.0 KVA | 1 No | 1274000 | |
| 672 | ELEC-11.1.5 | Supply and providing of UPS cum battery rack up to 4 batteries | 1 No | 1500 |
| 673 | ELEC-11.1.6 | Supply and providing of battery rack for 5 to 10 batteries (42 AH) | 1 No | 3000 |
| 674 | ELEC-11.1.7 | Supply and providing of battery rack upto 11 to 20 batteries (42 AH) | 1 No | 5000 |
| 675 | ELEC-11.1.8 | Supply and providing of battery rack upto 20 to 30 batteries (65 & 100 AH) | 1 No | 9000 |
| 676 | ELEC-11.1.9 | Supply and fixing of 12V 26 AH SMF battery with 3 years Warrenty, including wire leads ,connections etc complete., Makes: Quanta / Racket / Exide. |
1 No | 3200 |
| 677 | ELEC-11.1.10 | Supply and fixing of 12V 42 AH SMF battery with 3 years Warrentyincluding wire leads ,connections etc complete., Makes: Quanta / Racket / Exide. | 1 No | 5700 |
| 678 | ELEC-11.1.11 | Supply and fixing of 12V 65 AH SMF battery with 3 years warrenty including wire leads ,connections etc complete., Makes: Quanta / Racket / Exide. | 1 No | 7200 |
| 679 | ELEC-11.1.12 | Supply and fixing of 12V 100 AH SMF battery with 3 years warrenty including wire leads,connections etc complete., Makes: Quanta / Racket / Exide. | 1 No | 10440 |
| 680 | ELEC-11.1.13 | Supply and fixing of 12V 120/130 AH SMF battery with 3 years warrenty including wire leads,connections etc complete., Makes: Quanta / Racket / Exide. |
1 No | 11160 |
| 681 | ELEC-11.1.14 | Supply and fixing of 12V, 150 AH SMF battery with 3 years warrentyincluding wire leads,connections etc complete., Makes: Quanta / Racket / Exide. | 1 No | 15600 |
| 682 | ELEC-11.1.15 | Supply and fixing of 12V, 200 AH SMF battery with 3 years warrenty including wire leads ,connections etc complete., Makes: Quanta / Racket / Exide. |
1 No | 21600 |
| 683 | ELEC-11.1.16 | Supply and fixing of 12V, 120 AH MF battery including wire leads Makes: Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic / Gotech. |
1 No | deleted |
| 684 | ELEC-11.1.17 | Supply and fixing of 12V, 150 AH MF battery including wire leads Makes: Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic / Gotech. |
1 No | 12000 |
| SECTION - 12 | ||||
| 12.1 | TEMPORARY ILLUMINATION | |||
| 685 | ELEC-12.1.1 | Hire charges for Temporary illumination, consisting of 20W LED tube light complete with required switchgears with continuous earth wire duly erected and dismantled with required scaffolding including cost and conveyance of all materials and labour charges etc., complete for one day. | 1 No | 35.00 |
| 686 | ELEC-12.1.2 | Hire charges for Temporary illumination, consisting of flood light fitting 1000/500W complete halogen fitting with lamp, holders, mains and required switchgears with continuous earth wire erected and dismantled with required scaffolding for one day. | 1 No | 292.00 |
| 687 | ELEC-12.1.3 | Hire charges for Temporary illumination, consisting of 400W Metalhalide flood light fitting with lamp,holders,mains and required switchgears with continuous earth wire erected and dismantled with requird scaffolding for one day. | 1 No | 343.00 |
| 688 | ELEC-12.1.4 | Hire charges for Temporary illumination, consisting of 400W Metal Halide flood light fitting with Coloured lamp (Blue / Pink / Yellow / Red etc.,)holders,mains and required switchgears with continuous earth wire erected and dismantled with required scaffolding for one day. | 1 No | 375.00 |
| 689 | ELEC-12.1.5 | Hire charges for Temporary illumination, consisting of 54 W LED RGB Parcan light fitting non integral, weather proof die cast alluminium housing with IP66 protection with control gear box, conrol gear with required cables, holder, mains duly errected with required scaffolding and dismantled on exising poles including cost and conveyance of all materials and labour charges etc., complete for one day. | 1 No | 363.00 |
| 690 | ELEC-12.1.6 | Hire charges for providing temporary illumination consisting of flood light fitting 150/200 W complete LED fitting with lamp, complete required switchgear erected and dismantled with using scaffolding for one day. | 1 No | 418.00 |
| 691 | ELEC-12.1.7 | Hire charges for temporary illumination consisting of strip lights 8mm LED lights of various colors (Navar Patta) complete with holders, required wire leads erected and dismantled including required scaffolding and T&P including cost and conveyance of all materials and all labour charges etc., complete for one day. | 1000 Nos | 1310.00 |
| 692 | ELEC-12.1.8 | Hire charges for temporary illumination consisting of white color series lights with miniature lamps of 8mm LED lights with required wire leads erected and dismantled dismantled including required scaffolding and T&P including cost and conveyance of all materials and all labour charges etc., complete for one day. | 1000 Nos | 900.00 |
| 693 | ELEC-12.1.9 | Hire charges for temporary illumination consisting of LED RGB pixel series strip lights 8mm LED lights of various colors (Navar Patta) complete with holders, required wire leads erected and dismantled including required scaffolding and T&P including cost and conveyance of all materials and all labour charges etc., complete for one day. | 1000 Nos | 1115.00 |
| 694 | ELEC-12.1.10 | Hire charges for temporary illumination consisting LED,RGB pixel series lights with miniature lamps of 8mm LED lights with required wire leads erected and dismantled including required scaffolding and T&P including cost and conveyance of all materials and all labour charges etc., complete for one day. | 1000 Nos | 715.00 |
| 695 | ELEC-12.1.11 | Hire Charges for National Flag of size 8"x4"Comprising LED's with required wire leads and switch gear etc., complete for one day. | 1 No | 5000.00 |
| 696 | ELEC-12.1.12 | Hire charges for supply and maintaining of oscillating type pedestal air circulators 600/900 mm connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling for one day. |
1 No | 160.00 |
| 697 | ELEC-12.1.13 | Hire charges for supply and maintaining of oscillating type pedestal fan 16" (400 mm) or ceiling fan connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 147.00 |
| 698 | ELEC-12.1.14 | Hire charges for Providing 1.1KW , 24500 m3/Hr Air cooler and required materials with necessary mains switch gear with continues earth lead during function duly removing including cost and conveyance of all materials and labour charges etc.,complete for one day. | 1 No | 1240.00 |
| 699 | ELEC-12.1.15 | Hire charges for supply and maintaining of heavy duty exhaust fan 18" or 24" connected with necessary mains, required switchgears with continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 147.00 |
| 700 | ELEC-12.1.16 | Hire charges for supply and maintaining of plug points with 16A/6A 5 Pin socket and swich with necessary mains, required switchgears and continuous earth connection for one day. | 1 No | 62.00 |
| 701 | ELEC-12.1.17 | Hire charges for supply and maintaining 280 litres capacity refrigerator complete with M.S. stand if necessary connected with mains, switchgear and continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 500.00 |
| 702 | ELEC-12.1.18 | Hire charges for supply and maintaining 120/150 liter capacity water cooler with water filter (candle type or UV tube) with M.S. stand complete with minor plumbing work if necessary connected with mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 1100.00 |
| 703 | ELEC-12.1.19 | Hire charges for supply and maintaining 20"/24" colour television with multi channel tuner, connected with necessary mains, required switchgearswith continuous earthing maintaining the same during the function and including dismantling for one day. |
1 No | 360.00 |
| 704 | ELEC-12.1.20 | Providing and maintaining temporary LCD/LED colour T.V. (32''to 42'' size) and positioning at site with required cabling as perdirection of authority, duly connecting and testing for one day. | 1 No | 750.00 |
| 705 | ELEC-12.1.21 | Hire charges for supply and maintaining 6V/10V with 20/40 Watt fluorescent emergency lamp connected with necessary mains, | 1 No | 100.00 |
| required switchgears and continuous earthing maintaining the same during the function and including dismantling for one day. | ||||
| 706 | ELEC-12.1.22 | Hire charges for supply and maintaining digital projector with spring loaded white screen connected with necessary mains, required switchgears and maintaining the same during the function including dismantling for one day. | 1 No | 5100.00 |
| 707 | ELEC-12.1.23 | Hire charges for providing 1.5/2.0 Ton capacity split type air conditioning unit complete with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 4200.00 |
| 708 | ELEC-12.1.24 | Hire charges for providing 3.5 Ton capacity tower type air conditioning unit complete with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains, required switchgears and continuous earthing maintaining the same during the function and including dismantling for one day. | 1 No | 4800.00 |
| 709 | ELEC-12.1.25 | Hire charges for providing 4.5 Ton capacity tower type air conditioning unit complete with temporary stand and fabrication work and required material to achieve cooling temperature connected along with necessary mains,required switchgears and continuous earthing, maintaining the same during the function and including dismantling for one day. |
1 No | 5500.00 |
| 710 | ELEC-12.1.26 | Hire charges for providing 6.5Ton/7.5Ton capacity tower typeair conditioning unit complete with temporary stand and fabrication work and required material to | 1 No | 6500.00 |
| achieve cooling temperature connected along with necessary mains,required switchgears and continuous earthing, maintaining the same during the function and including dismantling for one day. | ||||
| 711 | ELEC-12.1.27 | Hire charges for providing, maintaining and operating temporary public address system on hire consisting 02 Nos. solid state heavy wattage amplifier 250 watts ( one for working and another for stand by emergency ) working on AC / generator and 24 volt car battery supply, 06 Nos. of matching of 100 volt line (200 watts) box type speakers/sound column, 02 Nos super sensitive microphone with suitable size of microphone holding stand. The system shall be in a fully automatic change over operation in case of failure of supply for one day. | 1 No | 7500.00 |
| 712 | ELEC-12.1.28 | Hire charges for providing and maintaining temporary additional box type speaker of 100 Volt line ( 100 watts ) for one day. | 1 No | 350.00 |
| 713 | ELEC-12.1.29 | Hire charges for providing and maintaining temporary cordless ( Hand type or lape type ) super sensitive HUF microphone (1 no stand by) for one day. | 1 No | 2430.00 |
| 714 | ELEC-12.1.30 | Providing temporary line matching transformer (40-XT) for speakers having distance more than 60 Mtrs from Amplifiers and maintaining the same for one day. | 1 No | 200.00 |
| 715 | ELEC-12.1.31 | Hire charges for providing, maintaining and operating fingertip switcher of 8 ways to operate the public address system between dias and participants in the hall with necessary cabling, wiring etc for one day. | 1 No | 2500.00 |
| 716 | ELEC-12.1.32 | Hire charges providing and maintaining all in one desktop PC with following configuration Intel TM second generation core i3 G630,2GB DDR3 RAM, 1TB HARD DISK, DVDR W optical drive 20'' LED screen, web camera, wifi, bluetooth, keyboard and mouse, media card reader etc for one day. |
1 No | 1000.00 |
| 717 | ELEC-12.1.33 | Hire charges providing and maintaining Laser Printer, resolution (in dpi) mono 600, paper size A4, print speed in PPM (A4 size) 25, Port: 1 USB, memory (in MB): NA network card 10/100:YES, Duplexing: YES etc for one day. | 1 No | 300.00 |
| 718 | ELEC-12.1.34 | Hire charges for providing and maintaining 1 KVA on line UPS pure sine wave suitable for 30 minutes battery backup to provided computer with necessary interconnecting cabling, wiring etc for one day. | 1 No | 1650.00 |
| 719 | ELEC-12.1.35 | Hire cahres for providing and maintaining temporary 1400 VA to 1600 VA digital pure sine wave Invertor based on IGBT technology suitable for 120 minutes battery backup to electrical installation with necessary interconnecting cabling, wiring etc for one day. | 1 No | 1000.00 |
| 720 | ELEC-12.1.36 | Hire charges for supply and fixing distributation main board consisiting of 400A/250A 4pole MCCB with bus bar arrangement 12 Nos 63A fuse units as out going including conveyance of all materials and all labour charges etc., complete for one day. | 1 No | 1346.00 |
| 721 | ELEC-12.1.37 | Hire charges for Supply & Fixing of Distribution board of load main board consisting of 400A MCCB 4 pole with Busbar arrangement and 12 Nos 63A fuse units as out going including conveyance of all materials and all labour charges etc., complete for one day. | 1 No | 1374.00 |
| 722 | ELEC-12.1.38 | Hire charges for Supply & Fixing of Distribution board of load main board consisting of 250A MCCB 4 pole with Busbar arrangement and 12 Nos 63A fuse units as out going including conveyance of all materials and all labour charges etc., complete for one day. | 1 No | 1318.00 |
| 723 | ELEC-12.1.39 | Hire charges for supply and maintaining towards supply and fixing of 200A 4 pole Changeover / TPN switches including erection and dismantling and cost and conveyance of all materials and labour charges complete for one day. | 1 No | 305.00 |
| 724 | ELEC-12.1.40 | Hire charges for supply and fixing distributation main board consisiting of 400A/250A 4pole change over switch with bus bar arrangement 12 Nos 63A fuse units as out going including conveyance of all materials and all labour charges etc., complete for one day. | 1 No | 1302.00 |
| 725 | ELEC-12.1.41 | Hire charges for supply and fixing distributation main board consisiting of 250A 4pole change over switch with bus bar arrangement 12 Nos 63A fuse units as out going including conveyance of all materials and all labour charges etc., complete for one day. | 1 No | 1257.00 |
| 726 | ELEC-12.1.42 | Hire charges for Supply and maintaining towards suppy and fixing of 4 way TPN DB with 1 No 125 TP MCCB and 12Nos 6-32A 10kA SP MCBs including erection and dismantling and cost and conveyance of all materials and labour charges complete for one day. |
1 No | 1160.00 |
| 727 | ELEC-12.1.43 | Hire charges for Supply and maintaining towards suppy and fixing of 6 way TPN DB with IP-43 Protection with 1 No 125 FP MCCB and 18Nos 6-32A 10kA SP MCBs including erection and dismantling and cost and conveyance of all materials and labour charges complete for one day. | 1 No | 1201.00 |
| 728 | ELEC-12.1.44 | Hire charges for providing industrial type panel board consisting of bus bar chamber with 200/250 amps incoming TP/MCCB as incomers switch, 12 nos 63 amps fuse unit, earth wire erected and dismantled all accessories etc., complete for one day. | 1 No | 464.00 |
| 729 | ELEC-12.1.45 | Hire charges for supply and installing and maintaining towards supply and run of 1 of 6/10 Sq.mm WPTC / 2 of WPSC / VIR cable with necessary terminations etc. complete for one day. | 1 Mtr | 5.00 |
| 730 | ELEC-12.1.46 | Hire charges for supply and installing and maintaining towards supply and run of 16 Sq.mm to 35 Sqmm x 3 1/2 core cable / 4 of single core 16 Sqmm to 35 Sqmm cable with necessary terminations etc. complete for one day. | 1 Mtr | 25.00 |
| 731 | ELEC-12.1.47 | Hire charges for supply and installing and maintaining towards supply and run of 50Sqmm to 95 Sq.mm x 31/2 core cable / 4 of single core 50Sqmm to 95Sqmm cable with necessary terminations etc. complete for one day. | 1 Mtr | 27.00 |
| 732 | ELEC-12.1.48 | Hire charges for supply and installing and maintaining towards supply and run of 50 Sqmm x 3 1/2 core cable / 4 of single core 50 Sqmm cable with necessary terminations etc. complete for one day. | 1 Mtr | 26.00 |
| 733 | ELEC-12.1.49 | Hire charges for supply and installing and maintaining towards supply and run of 95 Sq.mm x 31/2 core cable / 4 of single core 95Sqmm cable with necessary terminations etc. complete for one day. | 1 Mtr | 28.00 |
| 734 | ELEC-12.1.50 | Hire charges for supply and installing and maintaining towards supply and run of 120 Sq.mm x 3 1/2 core cable / 4 of single core 120 Sq.mm cable with necessary terminations etc. complete for one day. |
1 Mtr | 29.00 |
| 735 | ELEC-12.1.51 | Hire charges for supply and installing and maintaining towards supply and run of 185 Sq.mm x 3 1/2 core cable / 4 of single core 185 Sq.mm cable with necessary terminations etc. complete for one day. |
1 Mtr | 32.00 |
| 736 | ELEC-12.1.52 | Hire chages for Supply and erection of MS Single pole structure of 20' (6.00 Mtrs.) with necessary cross arms and hardware materials for fixing halogen / Metal halide fittings etc., and dismantling and cost and conveyance of all materials and all labour charges complete for one day. | 1 No | 1571.00 |
| 737 | ELEC-12.1.53 | Hire charges for Supply and erection of 4 pole structure of 4 of 25' (7.50 Mtrs.) GI pipe of 63/80mm dia with necessary cross arms and hardware materials for fixing halogen / Metal halide fittings with suitable earthing arrangements and dismantling and cost and conveyance of all materials and all labour charges complete for one day. | 1 No | 2084.00 |
| 738 | ELEC-12.1.54 | Hire charges for Supply and erection of 6 pole structure of 6 of 25' (7.50 Mtrs.) GI pipe of 63/80mm dia with necessary cross arms and hardware materials for fixing halogen / Metal halide fittings with suitable earthing arrangements and dismantling and cost and conveyance of all materials and all labour charges complete for one day. | 1 No | 3134.00 |
| 739 | ELEC-12.1.55 | Hire charges for providing, commissioning and maintaining CCTV system with 8 channel NVR, IP video/audio input - 1 no, IP based 2.0 MP, Full HD, IR IP dome camera - 2 nos, IP based 2.0 MP, Full HD, IR IP PTZ camera - 2 nos, 2TB Hard Disk - 2 no, 32'' Full H D professional Display - 1 no, 8 port PoE Switch - 1 no, Power supply unit to camera - 1 no, On Line UPS - 1 no with necessary mains, switchgears for one day |
1 Job | 7140.00 |
| 740 | ELEC-12.1.56 | Hire charges for providing, commissioning and maintaining IP based 2.0 MP, full HD, IR IP dome / bullet camera with necessary Cat 6 cables etc., for one day. | 1 No | 890.00 |
| 741 | ELEC-12.1.57 | Hire charges for providing, commissioning and maintaining IP based 2.0 MP, Full HD, IR IP PTZ camera with necessary Cat 6 cables etc., for one day. | 1 No | 2460.00 |
| Note:- | 1) The Rates for all the items are for one glowing / working day | |||
| 2) Allow 50% of the rate for each day upto 3 days (i.e, 2nd and 3rd day) (Except items 12.1.23 to 12.1.26) . | ||||
| 3) For each additional day after 3 days, but not exceeding 15 days, allow 25% rate. | ||||
| 4) For more than 15 days allow 10% per day but total rental charges shall not exceed 80% of the capital cost of the item. | ||||
| 5) For item no. 12.1.22 the rates of projector is for 1 function or for max. period of 1 day whichever is more, including transportation, connections with projector, operator till completion of function. | ||||
| 6) For item No 12.1.23 to 12.1.26, the rate is for one day, For subsequent days (i.e, 2nd to 8th day) allow 75% of the above rate, after 8th day allow 50% the rate. | ||||
| 12.2 Hiring of Generators | ||||
| 742 | ELEC-12.2.1 | Hire charges for supplying and maintaining 62.5KVA, 415V, 50 cycles A.C.Generating set with acoustic enclosure as per IS Specification with DCM 4 Wheeler Vehicle with all standard accessories such as control panel, batteries etc. complete excluding cost of fuel, for one day. | 1 No | 6825.00 |
| 743 | ELEC-12.2.2 | Hire charges for supplying and maintaining 125KVA 415V 50 cycles A.C.Generating set with acoustic enclosure as per IS Specification with DCM 4 Wheeler Vehicle with all standard accessories such as control panel, batteries etc. complete excluding cost of fuel, for one day. | 1 No | 7800.00 |
| 744 | ELEC-12.2.3 | Hire charges for supplying and maintaining 250KVA 415V 50 cycles A.C.Generating set with acoustic enclosure as per IS Specification with DCM 4 Wheeler Vehicle with all standard accessories such as control panel, batteries etc. complete excluding cost of fuel, for one day. | 1 No | 10925.00 |
| Note:- | 1) Above rates are applicable for per one day only. | |||
| 2) For subsequent days the above rate shall be reduced by 25% after 8th day reduce the rate by 50% | ||||
| 3) Diesel cost will be paid extra for running hours at the prevailing rates. | ||||
| 4) For test run,. The minimum requirement of the fuel shall be born by the contractor. | ||||
| 5) The D.G set should be in good conditin and the life of set shall not be beyond 10 years. | ||||
*****