Electro Mechanical -6
13.1 | LIFTS (New Installation) | |||
745 | ELEC-13.1.1 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 8 Passenger/544Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of mm wide x ......mm deep x mm high• LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. •Lift shaft available having clear size of mm wide x ......mm deep. mm Pit depth, ………mm Overhead. |
1Job | 1059400.00 |
746 | ELEC-13.1.2 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 10 Passenger/680Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. Clear Car size of mm wide x ......mm deep x mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. • Other mechanical parts such as 'T' section adequate size guiderails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of mm wide x ......mm deep , mm Pit depth, , ………mm Overhead. |
1Job | 1267300.00 |
747 | ELEC-13.1.3 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 13 Passenger/884Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs. • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 900/1000 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/ frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of mm wide x ....mm deep x mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor /control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of mm wide x ......mm deep, mm Pit depth, ………mm Overhead |
1Job | 1353000.00 |
748 | ELEC-13.1.4 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger cum Stretcher/Hospital Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 15 Passenger/1020Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails,mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of mm wide x ......mm deep x mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings• Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery , adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of mm wide x ......mm deep , mm Pit depth, , ………mm Overhead |
1Job | 1586000.00 |
749 | ELEC-13.1.5 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger cum Stretcher/Hospital Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 20 Passenger/1360Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 1100/1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of mm wide x ....mm deep x mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PM SM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size &strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead. |
1Job | 1891300.00 |
750 | ELEC-13.1.6 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 22 Passenger/1496Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 1100 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of mm wide x ......mm deep x mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visualindication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of mm wide x ......mm deep, mm Pit depth, ………mm Overhead. |
1Job | 1940200.00 |
751 | ELEC-13.1.7 | Supply,Installation,Testing and Commissioning of Electric Traction Passenger cum Stretcher/Hospital Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 26 Passenger/1768Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 1100/1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of mm wide x ......mm deep x mm high •LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of ......mm wide x mm deep, ......mm Pit depth, mm Overhead. |
1Job | 2069800.00 |
752 | ELEC-13.1.8 | Supply,Installation,Testing and Commissioning of Electric Traction Goods Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 3000Kg Goods/44 Passengers • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR • Rated speed :- 0.6 to 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 1700 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of mm wide x ......mm deep x mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & l uminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.• Lift shaft available having clear size of ......mm wide x......mm deep, mm Pit depth, mm Overhead. |
1Job | 2512600.00 |
753 | ELEC-13.1.9 | Supply,Installation,Testing and Commissioning of Electric Traction Goods Lift of makes:Kone/Otis/Schindler/Mitsubishi /Johnson with • Rated capacity :- 4000Kg 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames |
1Job | 2782500.00 |
and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of ......mm wide x mm deep, ......mm Pit depth, mm Overhead. |
||||
NOTE: | 1. The above rates are applicable only for the makes: KONE/OTIS/SCHINDLER/MITSUBIS HI/JOHNSON. | |||
2. If the local reputed brands prefered by the Departments or Corporations, the makes Suryodaya Elevators/ESCO Lifts/Sunrise Lifts/ or any other make approved by the competent authority subject to the condition that the Specifications remains unchanged can be adopted in the estimate by reducing the price @15% less than the above rates. | ||||
A | For Lift travelling up to six floors or at a speed of 1.0 mps, add as below, | |||
754 | 1 | For Lift having 700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete |
1Floor | 130650.00 |
755 | 2 | For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 134600.00 |
756 | 3 | For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 139300.00 |
757 | 4 | For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safefunctioning of lift installation complete | 1Floor | 143500.00 |
758 | 5 | For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landingdoors with all accessories etc. necessary for the normal safefunctioning of lift installation complete | 1Floor | 147800.00 |
759 | 6 | For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 152900.00 |
760 | 7 | For Lift having 1300mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons- arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landingdoors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 157600.00 |
761 | 8 | For Lift having 1400mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete |
1Floor | 162400.00 |
762 | 9 | For Lift having 1500mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 170600.00 |
763 | 10 | For Lift having 1700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 178900.00 |
764 | 11 | For Lift having 1800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 188000.00 |
765 | 12 | For Lift having 2100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 204800.00 |
766 | 13 | For Lift having 2200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 211900.00 |
A1 | For Lift travelling above six floors & up to fifteen floors or at a speed of 1.5 mps, add as below, | |||
767 | 1 | For Lift having 700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 136500.00 |
768 | 2 | For Lift having 800mm wide x 2000mm high clear entrance in1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete |
1Floor | 140700.00 |
769 | 3 | For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 145600.00 |
770 | 4 | For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 149900.00 |
771 | 5 | For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 154400.00 |
772 | 6 | For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 159800.00 |
773 | 7 | For Lift having 1300mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons- arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, &OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 164600.00 |
774 | 8 | For Lift having 1400mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete |
1Floor | 169600.00 |
775 | 9 | For Lift having 1500mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 178100.00 |
776 | 10 | For Lift having 1700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 186900.00 |
777 | 11 | For Lift having 1800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 196300.00 |
778 | 12 | For Lift having 2100mm wide x 2000mm high clear entrance 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 213900.00 |
779 | 13 | For Lift having 2200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete | 1Floor | 221400.00 |
A2 | For Lift travelling above fifteen floors & up to twenty floors or at a speed of 1.75 mps, add as below, |
|||
780 | 1 | For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 144800.00 |
781 | 2 | For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, &OSG rope, landingdoors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 149900.00 |
782 | 3 | For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 154300.00 |
783 | 4 | For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 159000.00 |
784 | 5 | For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 164500.00 |
785 | 6 | For Lift having 1300mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 169500.00 |
786 | 7 | For Lift having 1400mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two/four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 174600.00 |
787 | 8 | For Lift having 1500mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 183300.00 |
788 | 9 | For Lift having 1700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking,travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 192500.00 |
789 | 10 | For Lift having 1800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 163700.00 |
790 | 11 | For Lift having 2100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 220400.00 |
791 | 12 | For Lift having 2200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring 1.5mm thick SS 304 grade landing door [Six panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation. | 1Floor | 227800.00 |
B | If there is additional automatic car door, add as below. | |||
792 | 1 | For Lift car having 700mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 108200.00 |
793 | 2 | For Lift car having 800mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required Aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 111500.00 |
794 | 3 | For Lift car having 900mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel] complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 115400.00 |
795 | 4 | For Lift car having 1000mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel]complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 119200.00 |
796 | 5 | For Lift car having 1100mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel]complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete | 1Set | 122800.00 |
797 | 6 | For Lift car having 1200mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two panel]complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 127200.00 |
798 | 7 | For Lift car having 1300mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two/four panel] complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 131300.00 |
799 | 8 | For Lift car having 1400mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [Two/four panel]complete with required accessories like door operator mechanism with drive, required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. | 1Set | 135200.00 |
800 | 9 | For Lift car having 1500mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [four panel] complete with required accessories like door operator mechanism with drive,required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. |
1Set | 141900.00 |
801 | 10 | For Lift car having 1700mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [four panel] complete with required accessories like door operator mechanism with drive,required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. |
1Set | 149800.00 |
802 | 11 | For Lift car having 1800mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [four panel] complete with required accessories like door operator mechanism with drive,required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. |
1Set | 157200.00 |
803 | 12 | For Lift car having 2100mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [six panel] complete with required accessories like door operator mechanism with drive,required aluminium sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. |
1Set | 171800.00 |
804 | 13 | For Lift car having 2200mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [six panel] complete required aluminium sill, infrared curtain & necessary wiring interlocking arrangement etc. complete. | 1Set | 178400.00 |
C | For Full Collective control system, add as below. | |||
805 | 1 | For Lift travelling above First floor & up to Sixth floor | 1No | 26900.00 |
806 | 2 | For Lift travelling above Sixth floor & up to Fifteenth floor | 1No | 61600.00 |
807 | 3 | For Lift travelling above Fifteenth floor & up to Twentieth floor | 1No | 80800.00 |
808 | D | For additional 2MP Camera along with necessary accessories at Home Landing, add as given. | 1No | 13300.00 |
E | For Group control system of number of lifts, add as below. | |||
809 | 1 | For Duplex Lift control system | 1Job | 34200.00 |
810 | 2 | For Triplex Lift control system | 1Job | 51100.00 |
811 | 3 | For Quadruplex Lift control system | 1Job | 68900.00 |
812 | F | For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself. |
1No | 2700.00 |
G | The above rates are for landing & car door height of 2000mm and Lift car ceiling height of 2250mm. If the requirements for landing & car doors height above 2000mm & Lift car height above 2250mm, add overall Rs per 100mm rise per Lift per landing. |
|||
a | For Lift car enclosure & car door per 100mm Step rise | |||
814 | 1 | for Lift car door, having clear entrance of 700/800/900mm wide | 1 per Landing | 44300.00 |
815 | 2 | for Lift car door, having clear entrance 1000/1100/1200/1300mm wide |
1 per Landing | 60700.00 |
816 | 3 | for Lift car door, having clear entrance 1400/1500/1700mm wide | 1 per Landing | 106400.00 |
817 | 4 | for Lift car door, having clear entrance 1800/2100/2200mm wide | 1 per Landing | 180800.00 |
b | For Lift Landings per 100mm Step rise | |||
818 | 1 | for Lift Landing door having clear entrance of 700/800/900mm wide | 1 per Landing | 11100.00 |
819 | 2 | for Lift Landing door, having clear entrance of 1000/1100/1200/1300mm wide | 1 per Landing | 15100.00 |
820 | 3 | for Lift Landing door, having clear entrance of 1400/1500/1700mm wide | 1 per Landing | 23900.00 |
821 | 4 | for Lift Landing door, having clear entrance of 1800/2100/2200mm wide | 1 per Landing | 35800.00 |
Notes: | ||||
1 | General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. | |||
2 | Warrantee: - Job covers two years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. |
|||
Note 1 and 2 above shall be included in item description. | ||||
3 | If the lift shaft is greater than the required size of the lift as mentioned in relevant Indian Standard [with Amendments up to date], the provision of extra steel required for erecting supports of guide rails shall be made by the department as a separate item | |||
4 | The Electric power supply of 415 volts, 3 phase 4 wire,50Hz shall be made available up to Lift controller, and as per the provisions laid down in relevant The Electricity Safety Regulations 2010[with Amendments up to date], |
|||
Indian Standard, relevant Rules, the separate cables for lighting and power & shall be erected through lift shaft only with 2nos distinct earth connections from lift machine & controller | ||||
5 | The technical specification of Lift duty motor, control panel, brakes, guide rails, and guide shoes, lift car frame, car, counter weight and suspension, lift safety gear and governor, buffer, lift doors, locking device and contacts, lift wire rope of lifts shall be as per actual requirement of the job. | |||
6 | For nonstandard lift shafts the Lift capacity shall be selected so that all the safety clearances to be maintained as per the provisions laid down in relevant Indian Standard, & relevant Rules and work shall be carried out accordingly | |||
7 | For building having height of 15 mtr or more, lift shall meet the requirement of fireman lift as per the statutory requirements laid in relevant Indian Standard | |||
8 | While framing estimates of lifts for handicapped persons/ Hospital/Goods Lifts, the relevant Indian standard shall be referred for dimensions. | |||
9 | The sizes in mm for Lift car, entrance, available lift Shaft etc. with travel shall be mentioned in the Detailed Estimate | |||
10 | The above rates are for mostly installed Electric Traction Lifts, for Lift requirements with different purposes/ specifications, the items should be got approved from the competent authority | |||
11 | The Traffic Analysis [TA] shall be done as per the provisions laid down in relevant Indian standards for finalizing the capacity and number of Lifts in different types of buildings. | |||
13.2: LIFT REPAIR/MODERNIZATION | ||||
LIFT MACHINE | ||||
822 | ELEC-13.2.1 | Overhauling of Gearbox by opening the gear box, cleaning the oil path with oil adjusting the Thrust bearing, & bush with packings etc. and refilling with the fresh oil of requisite viscosity and sufficient quantity, complete with re-erection as original with necessary alignment & testing. |
1Job | 6000.00 |
823 | ELEC-13.2.2 | Providing dismantling the existing worn-out/damaged Thrust bearing & bush with allied accessories complete supplying &installing new Thrust bearing & Bush with allied accessories like packings etc. and refilling with the fresh gear oil of requisite viscosity and sufficient quantity, complete suitable up to 10 passenger lift car with re-erection as original with necessary alignment & testing | 1Job | 15000.00 |
824 | ELEC-13.2.3 | Providing dismantling the existing lift duty electric motor from lift gearbox coupling to carryout necessary repairs and re-erection the same as original with necessary alignment & testing complete after repairing |
1Job | 3000.00 |
825 | ELEC-13.2.4 | Providing rewinding of the electromagnetic type brake coil suitable to operate on 110V DC supply by superior quality enamelled copper wire of require size complete with testing | 1Job | 4500.00 |
826 | ELEC-13.2.5 | Providing and fixing new set brake liner of good quality complete with alignment & testing with removal of old worn-out brake liners | 1Job | 2500.00 |
827 | ELEC-13.2.6 | Providing dismantling the existing main driving sheave complete by hanging the lift car and providing and fixing a new main driving sheave made from superior quality cast iron completely finished having diameter up to 600mm suitable up to 4nos rope grooves the size for the same will be specified in the estimate | 1Job | 14500.00 |
828 | ELEC-13.2.7 | Providing dismantling the existing main driving sheave complete by hanging the lift car and providing and fixing a new main driving sheave made from superior quality cast iron completely finished having diameter 601 to 800mm suitable up to 4nos rope grooves . | 1Job | 18500.00 |
829 | ELEC-13.2.8 | Providing dismantling the existing diverter sheave complete by hanging the lift car and providing and fixing a new diverter sheave made from superior quality cast iron completely finished having diameter up to 250mm suitable up to 4nos rope grooves. | 1Job | 10400.00 |
830 | ELEC-13.2.9 | Providing dismantling the existing diverter sheave complete by hanging the lift car and providing and fixing a new diverter sheave made from superior quality cast iron completely finished having diameter 251 to 500mm suitable up to 4nos rope grooves. | 1Job | 11800.00 |
831 | ELEC-13.2.10 | Providing dismantling the existing OSG pulley set (top & bottom) complete and providing and fixing overspeed governor pulley set ( top& bottom) made from superior quality cast iron completely finished suitable for Lift car rated speed. | 1Job | 10200.00 |
832 | ELEC-13.2.11 | Providing dismantling the existing OSG rubber roller complete,providing and fixing new nylon roller of superior quality. | 1Job | 400.00 |
LIFT CAR | ||||
833 | ELEC-13.2.12 | Providing dismantling the existing lift car/counter weight guide shoe liner and providing and fixing new superior quality non-metallic car/counter weight guide shoe Liner complete with re- erection,alignment & adjustment complete with lubrication | 1Job | 2900.00 |
834 | ELEC-13.2.13 | Providing dismantling the existing unserviceable retiring cam (Door)by supplying & erecting new one of superior quality with necessary spare complete with re-erection and testing etc. with copper wound magnetic coil of 110V DC supply. | 1Job | 4600.00 |
835 | ELEC-13.2.14 | Providing dismantling the existing deteriorated lift car flooring/floor tiles by supplying & erecting SS chequered plate of required thickness and of superior quality with necessary material | 1Kg | 500.00 |
836 | ELEC-13.2.15 | Providing dismantling the existing deteriorated lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top &stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 4 to 8 passenger lift car |
1Job | 152100.00 |
837 | ELEC-13.2.16 | Providing dismantling the existing deteriorated lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top & stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 10 to 13 passenger lift |
1Job | 183200.00 |
838 | ELEC-13.2.17 | Providing dismantling the existing deteriorated lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top &stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 14 to 16 passenger lift car |
1Job | 213500.00 |
839 | ELEC-13.2.18 | Providing dismantling the existing deteriorated lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material | 1Job | 247500.00 |
complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top &stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 18 to 23 Passenger Lift Car | ||||
840 | ELEC-13.2.19 | Providing dismantling the existing deteriorated Lift car enclosure by supplying & erecting new enclosure made from 1.5mm thick stainless steel sheet SS304 grade of superior quality with necessary material complete with handrail, mirror, required thickness stainless steel chequered plate flooring and min. 2.5mm thick GI sheet car top &stainless steel 304grade 1.2mm thick false ceiling & required LED light fitting & cabin fan/blower, emergency light with necessary grill along with required accessories suitable for 26 to 36 Passenger Lift Car |
1Job | 315900.00 |
841 | ELEC-13.2.20 | Supplying erecting & testing & commissioning minimum 2000mm high Infra-Red/IR curtain with minimum 80beams, suitable to attach automatic Lift car door complete with electronic driver suitable to work on 230V AC supply with required wiring & accessories complete connected to the lift controller safety circuit. including dismantling of existing accessories as applicable | 1No | 49700.00 |
842 | ELEC-13.2.21 | Supplying & erecting laminated type with minimum 6mm thick mirror confirming to relevant standard in the lift car complete pasting with necessary adhesives if required and fixing with SS frame &accessories complete, this job includes dismantling of existing accessories as applicable | 1Sqft | 500.00 |
LIFT SHAFT | ||||
843 | ELEC-13.2.22 | Providing Emergency Stop Switch as per IS [push to stop&pull/rotate clockwise to open] erected on GI box in pit/LMR /car top for maintenance work complete with necessary wires | 1No | 700.00 |
844 | ELEC-13.2.23 | Supplying & erecting over travel final/Terminal limit switchcomplete with nylon roller for up & down direction alongwithcams etc as required. | 1No | 2000.00 |
845 | ELEC-13.2.24 | Providing and fixing new magnetic reed switch with M.S. Flag for levelling the lift. Providing and fixing necessary magnet for the floor position indicator, providing and fixing electronics card with digital indicator, complete with re- erection including dismantling of existing accessories as applicable | 1No | 1000.00 |
846 | ELEC-13.2.25 | Supplying & erecting lift car door lock with electrical contact[spring loaded NO/NC of 5A/250V rating] complete unit withBakelite roller attached to bracket on car top with M.S. "T" bracket attached to car gate complete with Testing including dismantling of existing accessories as applicable |
1No | 1000.00 |
847 | ELEC-13.2.26 | Supplying & erecting main suspension wire rope of 13mm dia.having 8/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable | 1Mt | 200.00 |
848 | ELEC-13.2.27 | Supplying & erecting main suspension wire rope of 10mm dia. having 8/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable |
1Mt | 200.00 |
849 | ELEC-13.2.28 | Supplying & erecting main suspension wire rope of 8mm dia.having 8/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable | 1Mt | 150.00 |
850 | ELEC-13.2.29 | Supplying & erecting wire rope of 3/4/6mm dia. having 6/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable | 1Mt | 100.00 |
851 | ELEC-13.2.30 | Supplying & erecting GI eye bolt suitable for tie up of min. 13mm dia. lift wire ropes with 4nos bull dog clips 8/19 construction as per IS Complete with termination in provided eye bolts including dismantling of existing accessories as applicable | 1No | 1500.00 |
852 | ELEC-13.2.31 | Supplying & erecting GI eye bolt suitable for tie up of 8/10mm dia.lift wire ropes with 4nos bull dog clips 8/19 construction as per IS Complete with termination in provided eye bolts including dismantling of existing accessories as applicable. | 1No | 1200.00 |
CAR & LANDING DOORS: | ||||
853 | ELEC-13.2.32 | Repairing of M.S. collapsible landing/lift car door for broken rivets, pickets gibes, roller bearings complete with oiling etc. complete with re-erection, and alignment for smooth operation |
1Job | 900.00 |
854 | ELEC-13.2.33 | Supplying & erecting MS collapsible type perforate Car/Landingdoor with 50mm high 8mm thick MS pata at top with roller bearings & nylon gibes complete having adequate strength as per requirements with necessary alignment complete with having clear opening of 700/800mm in width and clear height not less than 2000mm including dismantling of existing door as applicable | 1Job | 9000.00 |
855 | ELEC-13.2.34 | Supplying & erecting MS collapsible type perforate Car/Landingdoor with 50mm high 8mm thick MS pata at top with roller bearings & nylon gibes complete having adequate strength as per requirements with necessary alignment complete with having clear opening of 1000/1200mm in width and clear height not less than 2000mm including dismantling of existing door as applicable | 1Job | 10700.00 |
856 | ELEC-13.2.35 | Supplying & erecting MS Collapsible type imperforate Car/Landing door with 50mm high 8mm thick MS pata at top with roller bearings & Nylon gibes complete having adequate strength as per requirements with necessary alignment complete with grassing | 1Job | 14000.00 |
Note for Imperforate door the thickness of CRCA sheet not less than 1.mm having clear opening of 700/800mm in width and clear height not less than 2000mm, including dismantling of existing door as applicable | ||||
857 | ELEC-13.2.36 | Supplying & erecting COPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock &nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 700mm in width and clear height not less than2000mm, including dismantling of existing door as applicable. |
1Job | 62700.00 |
858 | ELEC-13.2.37 | Supplying & erecting COPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock &nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 800mm in width and clear height not less than2000mm, including dismantling of existing door as applicable |
1Job | 67200.00 |
859 | ELEC-13.2.38 | Supplying & erecting COPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock&nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 900mm in width and clear height not less than2000mm, including dismantling of existing door as applicable |
1Job | 76200.00 |
860 | ELEC-13.2.39 | Supplying & erecting COPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock &nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 1000mm in width and clear height not less than 2000mm, including dismantling of existing door as applicable |
1Job | 86800.00 |
861 | ELEC-13.2.40 | Supplying & erecting COPO car/landing door panels with frame made from 1.5mm thick SS 304grade sheet complete with necessary coupler arrangements, nylon bearings at hanger with header assembly with all required accessories with electromechanical lock & nylon coated guide shoes complete having adequate strength as per requirements with necessary alignment complete with greasing having clear opening of 1200mm in width and clear height not less than 2000mm, including dismantling of existing door as applicable |
1Job | 99000.00 |
862 | ELEC-13.2.41 | Providing & fixing aluminium sill with 1 track suitable for fixing of car/ landing door with necessary material like MS brackets, fasteners complete with alignment, including dismantling of existing door as applicable | 1Mt | 1050.00 |
863 | ELEC-13.2.42 | Providing & fixing aluminium Sill with 2 track suitable for fixing of car/ landing door with necessary material like MS brackets, fasteners complete with alignment, including dismantling of existing door as applicable | 1Mt | 1400.00 |
864 | ELEC-13.2.43 | Providing & fixing landing door gate lock of superior quality with necessary adjustable operating lever complies with the relevant IS suitable for swing or collapsible type landing doors | 1No | 4000.00 |
865 | ELEC-13.2.44 | Providing & fixing landing/Car gate movable contact electricalswitch of superior quality complies with the relevant IS suitable for all type of landing/car doors | 1No | 150.00 |
866 | ELEC-13.2.45 | Providing & fixing LOP with single push button with metallic top& Braille Coded suitable for UP/DN having luminous glow indicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for 1digits) complete with necessary connections, including dismantling of existing door as applicable | 1No | 4400.00 |
867 | ELEC-13.2.46 | Providing & fixing LOP with two push button with metallic top & Braille coded suitable for UP/DN having luminous glow indicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for 2digits) complete with necessary connections, including dismantling of existing door as applicable | 1No | 5300.00 |
868 | ELEC-13.2.47 | Providing & fixing COP with push buttons having luminous glow indicator around button suitable for G+7 floors with push buttons with metallic top & Braille coded suitable for door close, door open,alarm bell, stop, light, fan, intercom etc, FPI, with MS box & 3mm thick SS face Plate with UP & DN arrows & digital FPI (suitable for 2digits) complete with necessary connections, including dismantling of existing COP as applicable | 1No | 16300.00 |
869 | ELEC-13.2.48 | Providing & fixing push button suitable with micro switch withpush button on existing COP/LOP with necessary connections and testing complete including dismantling of existing button accessories as applicable | 1No | 950.00 |
870 | ELEC-13.2.49 | Providing & fixing 40mm high fixing digital indicator module ofgives indication of required shade with connections and testing complete including dismantling of existing accessories as applicable | 1No | 1200.00 |
871 | ELEC-13.2.50 | Providing & fixing car door operator motor with assembly ofsuitable capacity & speed with necessary pulleys & required accessories complete including dismantling of existing accessories as applicable | 1No | 24000.00 |
872 | ELEC-13.2.51 | Providing & fixing hydraulic type landing door closer suitable for swing door with necessary material complete, including dismantling of existing accessories as applicable | 1No | 1250.00 |
873 | ELEC-13.2.52 | Providing & fixing car/landing door guide shoe liner/gibescomplete with necessary material like nylon coating complete including dismantling of existing accessories as applicable | 1 door | 600.00 |
CONTROLLER | ||||
874 | ELEC-13.2.53 | Supplying erecting, testing & commissioning of electronic microprocessor/ PLC based collective-selective lift controller with closed loop logic suitable up to 5.5kW capacity lift duty motor without VVVF Drive and lift car travelling Gr+7 floors having manual operated doors complete erected on wall or floor made from 1.5mm thick CRCA sheet with powder coated enclosure having IP54 protection grade, including dismantling of existing accessories asapplicable. |
1Job | 104800.00 |
875 | ELEC-13.2.54 | Supplying erecting, testing & commissioning of electronic microprocessor/PLC based collective-selective lift controller with closed loop logic suitable up to 5.5kW capacity lift duty motor without VVVF Drive & lift car travelling Gr+7 floors having power operated doors complete erected on wall or floor made from 1.5mm thick CRCA sheet with powder coated enclosure having IP54 protection grade. including dismantling of existing accessories asapplicable | 1Job | 124700.00 |
876 | ELEC-13.2.55 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 5.5kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable | 1Job | 60900.00 |
877 | ELEC-13.2.56 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 7.5kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable | 1Job | 71350.00 |
878 | ELEC-13.2.57 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 10/11kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable | 1Job | 91200.00 |
879 | ELEC-13.2.58 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 15kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable | 1Job | 115300.00 |
880 | ELEC-13.2.59 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic suitable to drive lift door operator motor up to 0.5/0.75kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable | 1Job | 23900.00 |
881 | ELEC-13.2.60 | Supplying erecting, testing & commissioning of rotary encoder mounted on the lift motor shaft for correct & control the positioning & direction of the lift car & providing closed loop feedback to the lift controller complete with necessary shielded data cable up to controller with necessary connectors, this job includes dismantling of existing encoder if any. | 1Job | 22200.00 |
882 | ELEC-13.2.61 | Providing & fixing inspection/maintenance box with cover ofsuitable size with UP/DN push buttons (with mechanical protection),stop button as per IS, mechanically protected, toggle switch for normal/inspection/maintenance mode, 6A/250V 3Pin socket & 6A piano type switch protected cover with bulb & switch having IP54 grade protection class, this job includes dismantling of existing Inspection/maintenance box if any. | 1Job | 1500.00 |
883 | ELEC-13.2.62 | Providing & fixing junction box having size of 300x300mm & height of 80mm complete with Bakelite terminal strip of 16A/500V rating with cover having IP54 grade protection class includes dismantling of existing Junction box if any. This job includes dismantling of existing inspection/maintenance box if any. | 1Job | 1100.00 |
884 | ELEC-13.2.63 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for up to 8 passenger capacity lift car including dismantling of existing accessories as applicable | 1Job | 78600.00 |
885 | ELEC-13.2.64 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for 9 to 12 passenger capacity lift car. Including dismantling of existing accessories as applicable | 1Job | 89100.00 |
886 | ELEC-13.2.65 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for 13 to 16 passenger capacity lift car. Including dismantling of existing accessories as applicable | 1Job | 101800.00 |
887 | ELEC-13.2.66 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for 17 to 22 passenger capacity lift car. Including dismantling of existing accessories as applicable | 1Job | 116000.00 |
888 | ELEC-13.2.67 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for 23 to 29 passenger capacity lift car. Including dismantling of existing accessories as applicable | 1Job | 133300.00 |
889 | ELEC-13.2.68 | Providing complete lift shaft wiring in copper wire/cable frommain controller to car top with COP & to all landing push button panel to all landing gate locks to all floor levelling switch to main motor to brake unit & final limit switch indicator system using ISI mark single pvc insulated flexible copper wire having minimum1.0 sq. mm size from controller to safety devices & 0.75Sqmm size for indication system complete in PVC/GI trunking with cover for lift with manually/power operated doors travelling up to G+1floors /2stops& 2landings for floor height up to 4.2mtrs includingdismantling of existing accessories as applicable | 1Job | 20000.00 |
890 | ELEC-13.2.69 | Supplying, erecting & terminating flat flexible PVC insulated cable 4core 1.0 sq. mm copper conductor used for railing cables complete erected with PVC/wooden fastening arrangement & lugs, on wall / trunking as per specification including dismantling of existing accessories as applicable |
1Mt | 150.00 |
891 | ELEC-13.2.70 | Supplying, erecting & terminating flat flexible PVC insulated cable 12core 1.0 sq. mm copper conductor used for trailing cables complete erected with pvc/wooden fastening arrangement & lugs, on wall/ trunking as per specification including dismantling of existing accessories as applicable |
1Mt | 400.00 |
892 | ELEC-13.2.71 | Supplying, erecting, testing & commissioning programmable rope mounted Overload Warning Device (OWD) within built digital indicator complete with required wiring & accessories with audio visual indication in lift car including dismantling of existing accessories as applicable. | 1Job | 63800.00 |
Note: | 1.For item no 13-2-2. for 11 to 20 passenger capacity lift, add 15% to the basic cost |
|||
2.For item no 13-2-2. for 21 to 29 passenger capacity lift, add 25% to the basic cost |
||||
3.For item nos. 13-2-6 to 13-2-9 main/diverter sheave for additional groove exceeding 4nos, add 10% in the basic cost per additional groove | ||||
4.For item no's 13-2-33 to 13-2-35 for Stainless Steel Collapsible doors, basic cost of MS collapsible shall be doubled,Note:- This item shall be operated with prior permission in writing from the concern Superintending Engineer (Electrical). | ||||
5.For item no's 13-2-33 to 13-2-35, If the requirements for landing/car doors clear height above 2000mm , for Manual operated MS door panels add Rs.1,000/- per 100mm rise per landing. | ||||
6. For item nos. 13-2-36 to 13-2-40 the rates are for automatic landing/car door with clear height of 2000mm If the Requirements for landing/car doors clear height above 2000mm, refer add on item no. 13-1/G (b) |
||||
7.For item no 13-2-47- Providing & fixing additional Floor button with allied hardware components on COP, add Rs. 2500/- per additional button. |
||||
8.For item no 13-2-53 & 13-2-54... Lift Controller for Lift car travelling 9 stops to 15 stops, add Rs. 27300/-. | ||||
9.For item no 13-2-53 & 13-2-54... Lift Controller for Lift car travelling 16 stops to 21 stops, Rs. 46000/-. | ||||
10.For item no 13-2-53 & 13-2- 54....Lift Controller for PowerCircuit suitable for above 5.5kW & up to 10kW motor, add Rs.7500/-. | ||||
11.For item no 13-2-53 & 13-2-54... Lift Controller for PowerCircuit suitable for above 10kW & up to 15kW motor, add Rs.10900/- | ||||
12.For item no 13-2-68 ... For Lift Shaft Wiring in copper wire/cable, above 1st floor for lifts with manually/power operated doors, add Rs. 2500/- per floor. | ||||
13.The cost of dismantled material of lift parts, shall be calculatedon the rate analysis based on weight density calculations of actual dismantled material e.g. mild steel/MS/GI/SS sheets, motors, copper wire, wooden parts etc. | ||||
14.The lift dismantled retrieved material will be handed over to agency and the calculated amount will be deducted in the bill. | ||||
13.3: DISMANTLING | ||||
893 | ELEC-13.3.1 | Dismantling the existing 4 to 7 Passenger lift of all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails,controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material upto division/section store and handing over to the section engineer/store keeper in charge complete. | 1Job | 30000.00 |
894 | ELEC-13.3.2 | Dismantling the existing 8 to 12 Passenger lift of all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails,controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material upto division/section store and handing over to the section engineer/store keeper in charge complete | 1Job | 35000.00 |
895 | ELEC-13.3.3 | Dismantling the existing 13 to 17 passenger/Stretcher/Goods lift of all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material up to division/section store and handing over to the section engineer/store keeper in charge complete | 1Job | 40000.00 |
896 | ELEC-13.3.4 | Dismantling the existing 18 to 22 Passenger/Stretcher/Goods lift of all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material up to division/section store and handing over to the section engineer/store keeper in charge complete | 1Job | 42000.00 |
897 | ELEC-13.3.5 | Dismantling the existing 23 to 26 Passenger/Stretcher/Goods lift of all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material up to division/section store and handing over to the section engineer/store keeper in charge complete | 1Job | 48000.00 |
898 | ELEC-13.3.6 | Dismantling the existing 27 to 36 Passenger/Stretcher/Goods liftof all types travelling G+1 floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material up to division/section store and handing over to the section engineer/store keeper in charge complete | 1Job | 52000.00 |
899 | ELEC-13.3.7 | Dismantling the 3000 to 5000KG Goods lift of all types travelling G+1Upper Floors (2 Landings/2Stops) having with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all respect complete with refilling the holes with cement mortar & making the site as original this job includes transportation of the dismantled material up to division/section store and handing over to the section engineer/store keeper in charge complete Add On | 1Job | 54000.00 |
A | If there are addition of floors for lift travelling up to six floors, add as given below | |||
1 | For 4 to 7 passenger lift of all types | 1Floor | 2500.00 | |
2 | For 8 to 12 passenger lift of all types | 1Floor | 2700.00 | |
3 | For 13 to 17 passenger/stretcher/goods lift of all types | 1Floor | 2900.00 | |
4 | For 18 to 23 passenger/stretcher/goods lift of all types | 1Floor | 3300.00 | |
5 | For 23 to 26 passenger/stretcher/goods lift of all types | 1Floor | 3400.00 | |
6 | For 27 to 36 passenger/stretcher/goods lift of all types | 1Floor | 3600.00 | |
7 | For 3000 to 5000Kg goods lift of all types | 1Floor | 3900.00 | |
A1 | If there are additional floors for Lift travelling above Six floors and up to Fifteen floors Add as given below | |||
1 | For 4 to 7 passenger lift of all types | 1Floor | 2700.00 | |
2 | For 8 to 12 passenger lift of all types | 1Floor | 2900.00 | |
3 | For 13 to 17 passenger/stretcher/goods lift of all types | 1Floor | 3300.00 | |
4 | For 18 to 23 passenger/stretcher/goods lift of all types | 1Floor | 3400.00 | |
5 | For 23 to 26 passenger/stretcher/goods lift of all types | 1Floor | 3600.00 | |
6 | For 27 to 36 passenger/stretcher/goods lift of all types | 1Floor | 3900.00 | |
7 | For 3000 to 5000Kg goods lift of all types | 1Floor | 4100.00 | |
A2 | If there are additional floors for Lift travelling above fifteen floors and up to Twenty floors , add as given below | |||
1 | For 4 to 7 passenger lift of all types | 1Floor | 2900.00 | |
2 | For 8 to 12 passenger lift of all types | 1Floor | 3300.00 | |
3 | For 13 to 17 passenger/stretcher/goods lift of all types | 1Floor | 3400.00 | |
4 | For 18 to 23 passenger/stretcher/goods lift of all types | 1Floor | 3600.00 | |
5 | For 23 to 26 passenger/stretcher/goods lift of all types | 1Floor | 3900.00 | |
6 | For 27 to 36 passenger/stretcher/goods lift of all types | 1Floor | 4100.00 | |
7 | For 3000 to 5000Kg goods lift of all types | 1Floor | 4500.00 | |
B | If there are additional set of lift car door and landing door, add | |||
as given below | ||||
1 | For 4 to 7 passenger lift of all types | 1Set | 1800.00 | |
2 | For 8 to 12 passenger lift of all types | 1Set | 2000.00 | |
3 | For 13 to 17 passenger/stretcher/goods lift of all types | 1Set | 2100.00 | |
4 | For 18 to 23 passenger/stretcher/goods lift of all types | 1Set | 2400.00 | |
5 | For 23 to 26 passenger/stretcher/goods lift of all types | 1Set | 2100.00 | |
6 | For 27 to 36 passenger/stretcher/goods lift of all types | 1Set | 2500.00 | |
7 | For 3000 to 5000Kg goods lift of all types | 1Set | 3000.00 | |
Notes: | 1) The lift dismantled material cost shall be calculated on the rate analysis based on weight density calculations of actual dismantled material e. mild steel/MS/GI/SS sheets, motors, copper wire,wooden parts etc | |||
2) The lift dismantled retrieved material will be handed over to agency and the calculated amount will be deducted in the bill. | ||||
References | ||||
The applicable Indian Standards for Lifts are as follows | ||||
National Building Code 2016 - Part 8 Building Services Section 5 & 5A Installation of Lifts, |
||||
IS 8216:1976 Guide for Inspection of Wire Ropes | ||||
IS 14665 (Part 1) :2000 -Electric Traction Lifts Part 1 Guidelines For Outline Dimensions of Passenger, Goods, Service and Hospital Lifts | ||||
IS 14665 (Part 2/Sec 1 & 2) : 2000 - Electric Traction Lifts Part 2 Code of Practice For Installation, Operation and Maintenance Section 1 Passenger and Goods Lifts Section 2 Service Lifts |
||||
IS 14665 (Part 3/Sec 1 & 2 ) : 2000- Electric Traction Part 3 Safety Rules Lifts Section 1 Passenger and Goods Lifts, Section 2 Service Lifts |
||||
IS 14665 (Part 4/Sec 1 to 9) : 2001 - Electric Traction Lifts Part 4 Components Section 1 Lift Buffers, Section 2 Lift Guide Rails and Guide Shoes, Section 3 Lift Car frame, Car, Counterweight and Suspension, Section 4 Lift Safety Gears and Governors, Section 5 Lift Retiring Cam, Section 6 Lift Doors and Locking Devices and Contacts, Section 7 Lift Machines and Brakes, Section 8 Lift Wire Ropes, Section 9 Controller and Operating Devices for Lifts |
||||
IS 14665 (Part 5) :1999 -Electric Traction Lifts — Specification Part 5 Inspection Manual | ||||
IS 15785 : 2007 Installation and Maintenance of Lift without conventional Machine Rooms Code of Practice | ||||
IS 15330: 2003 Code of Practice for Installation and Maintenance of Lifts for differently abled Persons | ||||
Local Authority Rules : The Development Control Regulations of The local Authority | ||||
Abbreviations | ||||
Symbol | Meaning | |||
ARD | Automatic Rescue Device | |||
CCTV | Closed Circuit Television | |||
COP | Car Operating Panel | |||
COPO | Centre Opening Power Operated | |||
CPI | Car Position Indicator | |||
CRCA | Cold Rolled Close Annealed | |||
FCAMC | Fully Comprehensive Annual Maintenance Contract | |||
FCC | Fire Command Centre | |||
FHD | Full High Definition | |||
FPI | Floor Position Indicator | |||
GI | Galvanised Iron | |||
HDR | High Definition Recording | |||
IBMS | Intelligent Building Management System | |||
IP | Internet Protocol | |||
IP54 | Ingress Protection i. e Protection from limited dust ingress & Protection from water spray from any direction | |||
IS | Indian Standards | |||
ISI | Indian Standards Institute, | |||
Kg | Kilograms | |||
kW | Kilowatt rating | |||
LED | Light Emitting Diode | |||
LFT | Lift Installation | |||
LMR | Lift Machine Room | |||
LOP | Landing Operating Panel | |||
MP | Mega Pixel | |||
mps | meters per second | |||
MR | Machine Room | |||
MRL | Machine Room Less | |||
MS | Mild Steel | |||
mtrs | meters | |||
NBC | National Building Code | |||
NVR | Network Video Recorder | |||
OSG | Over speed Safety Governor | |||
OWD | Overload Warning Device | |||
PLC | Programmable Logic Control | |||
PMSM | Permanent Magnet Synchronous AC Machine | |||
PVC | Polyvinyl Chloride | |||
SITC | Supplying, Installing, Testing and Commissioning | |||
SMF | Sealed Maintenance Free | |||
SS | Stainless Steel | |||
TOPO | Telescopic Opening Power Operated | |||
UP/DN | Up/Down | |||
VAS | Voice Annunciation System | |||
VRLA | Valve-Regulated Lead-Acid | |||
VS | Variable Speed | |||
VVVF | Variable Voltage Variable Frequency |
*****