| 5.3 | ACCESSORIES FOR WATER HEATERS | |||
| 204 | ELEC-5.3.1 | Supply and fixing of stem type ISI marked (IS 3017 / 85) snap action adjustable thermostat storage water heater including making connection testing etc. as required.Makes: | ||
| a | 11" stem thermostat | 1 No | 190 | |
| b | 7" stem thermostat | 1 No | 170 | |
| 205 | ELEC-5.3.2 | Supply and fixing of stem type, ISI marked, push to reset type auto thermal cut off and rated at 20 A 250 V including testing etc. as required. | 1 No | 225 |
| 206 | ELEC-5.3.3 | Supply and fixing of ISI marked ( IS:4159) marked copper sheathed,nickle plated, mineral filled heating element including making connection testing etc as required | ||
| a | 3.0 KW | 1 No | 650 | |
| b | 2.0 KW | 1 No | 620 | |
| 207 | ELEC-5.3.4 | Supply and fixing of twin ceremic catridge, shock and hard water proof heating element including making connecton testing etc as required | ||
| a | 3.0 KW | 1 No | 750 | |
| b | 2.0 KW | 1 No | 650 | |
| 208 | ELEC-5.3.5 | Supply and fixing of base plate assembly with neoprene rubber gasket, inlet socket with inbuilt NRV/ PRV and drain out system and outlet socket pipe,fusible plug assembly,mounting hardwares complete etc. as required. |
||
| a | 15 Ltr. To 50 Ltr. Capacity SWH | 1 No | 1400 | |
| 209 | ELEC-5.3.5 | Supply and fixing of heavy duty C.P. connection for storage water heater for inlet and outlet of length 300- 600 mm including the cost of nuts, washers etc as required. | 1 set | 250 |
| 210 | ELEC-5.3.6 | Charges for brass welding of inner copper tank for storage water heater including opening,refixing,testing etc. as required | job | 400 |
| 211 | ELEC-5.3.7 | Charges for descaling of storage water heater including required chemical, opening, refixing, testing as complete |
job | 300 |
| 212 | ELEC-5.3.8 | Charges for Fixing of storage water heater including four nos. rag bolts of suitable size,supply & making heavy gauge inlet, outlet C.P. connection, testing, carrying from store to site,etc. as required |
job | 650 |
| 5.4 | PUMPSETS | |||
| SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS | ||||
| 213 | ELEC-5.4.1 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha |
||
| a | 0.75HP 8 Stage | 1 No | 14150 | |
| b | 1.00HP 10 Stage | 1 No | 16200 | |
| c | 1.00HP 15 Stage | 1 No | 16700 | |
| d | 1.50HP 21 Stage | 1 No | 20250 | |
| e | 2.00HP 25 Stage | 1 No | 24300 | |
| 214 | ELEC-5.4.2 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/Sabar/Fitwell |
||
| a | 0.75HP 8 Stage | 1 No | 12700 | |
| b | 1.00HP 10 Stage | 1 No | 14500 | |
| c | 1.00HP 15 Stage | 1 No | 15000 | |
| d | 1.50HP 21 Stage | 1 No | 18200 | |
| e | 2.00HP 25 Stage | 1 No | 21850 | |
| THREE PHASE SUBMERSIBLE MOTOR PUMP SETS. | ||||
| 215 | ELEC-5.4.3 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha |
||
| a | 3.00HP 15Stage | 1 No | 19700 | |
| b | 4.00HP 20Stage | 1 No | 23000 | |
| c | 5.00HP 25Stage | 1 No | 27200 | |
| 216 | ELEC-5.4.4 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/ Anco/ Sabar/Fitwell |
||
| a | 3.00HP 15Stage | 1 No | 18500 | |
| b | 4.00HP 20Stage | 1 No | 21600 | |
| c | 5.00HP 25Stage | 1 No | 25600 | |
| 217 | ELEC-5.4.5 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha |
||
| a | 3.00HP 5-10 Stage | 1 No | 30000 | |
| b | 5.00HP, 5-10Stage | 1 No | 33750 | |
| c | 5.00HP, 12-16 Stage | 1 No | 38500 | |
| d | 7.50HP, 5-10 Stage | 1 No | 37900 | |
| e | 7.50HP, 12-16 Stage | 1 No | 42000 | |
| f | 7.50HP, 20-24 Stage | 1 No | 43000 | |
| g | 10HP, 5-10 Stage | 1 No | 44500 | |
| h | 10HP, 12-16 Stage | 1 No | 46000 | |
| i | 10HP, 20-24 Stage | 1 No | 52000 | |
| j | 12.5HP, 8-12 Stage | 1 No | 46000 | |
| k | 12.5HP, 16-24 Stage | 1 No | 54000 | |
| l | 15HP, 8-12 Stage | 1 No | 57900 | |
| m | 15HP, 16-24 Stage | 1 No | 59800 | |
| n | 20HP 10-20 Stage | 1 No | 69500 | |
| o | 20HP 30-40 Stage | 1 No | 72500 | |
| p | 25HP 20-25 Stage | 1 No | 79000 | |
| 218 | ELEC-5.4.6 | Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/ Sabar/Fitwell/Polycab |
||
| a | 3.00HP 5-10 Stage | 1 No | 27000 | |
| b | 5.00HP, 5-10Stage | 1 No | 30300 | |
| c | 5.00HP, 12-16 Stage | 1 No | 34650 | |
| d | 7.50HP, 5-10 Stage | 1 No | 34100 | |
| e | 7.50HP, 12-16 Stage | 1 No | 37800 | |
| f | 7.50HP, 20-24 Stage | 1 No | 38700 | |
| g | 10HP, 5-10 Stage | 1 No | 40000 | |
| h | 10HP, 12-16 Stage | 1 No | 41500 | |
| i | 10HP, 20-24 Stage | 1 No | 46800 | |
| j | 12.5HP, 8-12 Stage | 1 No | 41500 | |
| k | 12.5HP, 16-24 Stage | 1 No | 48600 | |
| l | 15HP, 8-12 Stage | 1 No | 52100 | |
| m | 15HP, 16-24 Stage | 1 No | 53800 | |
| n | 20HP 10-20 Stage | 1 No | 62500 | |
| o | 20HP 30-40 Stage | 1 No | 65200 | |
| SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR PUMP SETS | ||||
| 219 | ELEC-5.4.7 | Supply and Transportation of ……...Single phase open well submersible motor pumpset confirms to IS 14220 : 1994. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/PSG/ Aryen Varsha |
||
| a | 1.00HP | 1 No | 11200 | |
| b | 1.50HP | 1 No | 12600 | |
| c | 3.00HP | 1 No | 17200 | |
| 220 | ELEC-5.4.8 | Supply and Transportation of Single phase open well ISI submersible motor pumpsetconfirms to IS 14220 : 1994. Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Duke/LDK/Ellen/Suguna/UNItek/KSP/Anco/ Sabar/Fitwell |
||
| a | 1.00HP | 1 No | 10500 | |
| b | 1.50HP | 1 No | 12000 | |
| c | 3.00HP | 1 No | 16350 | |
| THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS | ||||
| 221 | ELEC-5.4.9 | Supply and Transportation of Three phase open well ISI submersible motor pumpset confirms to IS 14220 : 1994. . Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ Aryen Varsha |
||
| a | 3.00HP(65x50) | 1 No | 17200 | |
| b | 5.00HP(75x65) | 1 No | 21500 | |
| c | 7.50HP(100x75) | 1 No | 25500 | |
| d | 10.00HP(100x75) | 1 No | 32500 | |
| 222 | ELEC-5.4.10 | Supply and Transportation of Three phase open well ISI submersible motor pumpset confirms to IS 14220 : 1994. . Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Duke/LDK/Ellen/Suguna/UNItek/KSP /Polycab/ Anco/ Sabar/Fitwell |
||
| a | 3.00HP(65x50) | 1 No | 16500 | |
| b | 5.00HP(75x65) | 1 No | 20200 | |
| c | 7.50HP(100x75) | 1 No | 24000 | |
| d | 10.00HP(100x75) | 1 No | 31000 | |
| SINGLE PHASE MONO BLOCK MOTOR PUMP SETS. | ||||
| 223 | ELEC-5.4.11 | Supply and Transportation of ……. Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/Aryen Varsha |
||
| a | 0.5HP(25x25mm) | 1 No | 5000 | |
| b | 1.0HP (25x25mm) | 1 No | 7150 | |
| c | 1.5HP(32x25mm) | 1 No | 9600 | |
| 224 | ELEC-5.4.12 | Supply and Transportation of ……. Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Ellen/LDK/Suguna/UNItek/Polycab/Anco/ Sabar/Fitwell | ||
| a | 0.5HP(25x25mm) | 1 No | 4700 | |
| b | 1.0HP (25x25mm) | 1 No | 6800 | |
| c | 1.5HP(32x25mm) | 1 No | 9150 | |
| 225 | ELEC-5.4.13 | Supply and Transportation of Three phase ISI self priming Mono block IP44 motor pumpset . Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ Aryen Varsha |
||
| a | 2.00HP(40x40mm) | 1 No | 14200 | |
| b | 3.0HP (50x50mm) | 1 No | 19200 | |
| c | 5.00HP(80x80mm) | 1 No | 23200 | |
| 226 | ELEC-5.4.14 | Supply and Transportation of Three phase ISI self priming Mono block IP44 motor pumpset . Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Ellen/LDK/Suguna/UNItek/Polycab/Anco/ Sabar/Fitwell |
||
| a | 2.00HP(40x40mm) | 1 No | 13500 | |
| b | 3.0HP (50x50mm) | 1 No | 18300 | |
| c | 5.00HP(80x80mm) | 1 No | 22200 | |
| CONTROL PANEL BOARD FOR MOTOR PUMPSETS | ||||
| 227 | ELEC-5.4.15 | Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., | 1 No | 4500 |
| 228 | ELEC-5.4.16 | Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete.,. | 1 No | 6000 |
| 229 | ELEC-5.4.17 | Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. | ||
| Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No | ||||
| 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No. |
||||
| Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. | ||||
| 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No |
||||
| Indication lamps (R-Y-B) with switch control - 1set | ||||
| Voltmeter & Ammeter selector switch - 2 Nos | ||||
| Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. |
||||
| 230 | a | Upto 7.5 HP with DOL Starter of. Make C&S.Crompton / L&T / Siemens/BCH. |
1 No | 8000 |
| 231 | b | above 7.5 HP to 12.5 HP with Star- Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH. | 1 No | 14000 |
| 232 | c | From 15 HP up to 20 HP with Automatic Star Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH. |
1 No | 18500 |
| 233 | ELEC-5.4.18 | Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete suitable for…... Makes: Siemens / Crompton / L&T (MF1) |
||
| a | up to 3 HP | 1 No | 950 | |
| 234 | ELEC-5.4.19 | Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable for…... Makes: Siemens / Crompton / L&T (MK2 DOL). |
||
| a | up to 3 HP | 1 No | 1700 | |
| b | 5 to 7.5 HP | 1 No | 1900 | |
| c | 10 HP | 1 No | 2100 | |
| 235 | ELEC-5.4.20 | Supply & Fixing of Star-Delta Starter 415V, 3 phase, 50Hz.. enclosed with no volt coil, overload protection and single phase preventor , etc., complete suitable for Makes: Siemens / Crompton / L&T (MU1 DOL) | ||
| a | 12.50 to 15HP. | 1 No | 6800 | |
| b | 25HP to 30HP | 1 No | 11220 | |
| UPVC PIPES AND FITTINGS | ||||
| 236 | ELEC-5.4.21 | Supply and delivery of for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes : Ashirvad / Finolex / Waterflo /Sudhakar |
||
| a | 42 / 32mm dia UPVC raising column pipe, with standing upto 20 Kgs / CM2 upto 200 Mts | 1RM | 130 | |
| b | 48 / 40mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts | 1RM | 160 | |
| c | 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts | 1RM | 230 | |
| d | 75/65 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts | 1RM | 310 | |
| e | 88/80 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts | 1RM | 445 | |
| 237 | ELEC-5.4.22 | Supply and delivery of heavy duty couplings 42/32 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts | 1NO | 40 |
| 238 | ELEC-5.4.23 | Supply and delivery of heavy duty couplings 48/40 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts | 1NO | 55 |
| 239 | ELEC-5.4.24 | Supply and delivery of heavy duty couplings 60/50 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts | 1NO | 60 |
| 240 | ELEC-5.4.25 | Supply and delivery off heavy duty couplings 75/65 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts | 1NO | 70 |
| 241 | ELEC-5.4.26 | Supply and delivery of heavy duty couplings 88/80 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts | 1NO | 80 |
| 242 | ELEC-5.4.27 | Supply and Delivery of CI Adopter Assembly Makes : Ashirvad / Finolex / Waterflo | ||
| a | 1/2" (48/40mm) | 1NO | 575 | |
| b | 2" (60/50mm) | 1NO | 760 | |
| c | 2 1/2" (75/65 mm) | 1NO | 980 | |
| 243 | ELEC-5.4.28 | Supply and Delivery of pump guard assembly with 2Nos SS Powder coated flange and 2Nos SS Rods with nut and colter pin. Makes : Ashirvad / Finolex / Waterflo / Apollo |
||
| a | 1 1/2" (48/40mm) | 1NO | 360 | |
| b | 2" (60/50mm) | 1NO | 400 | |
| c | 2 1/2" (75/65 mm) | 1NO | 550 | |
| d | 3"(88/80 mm) | 1NO | 800 | |
| 5.5 | AIR CONDITIONERS | |||
| 244 | ELEC-5.5.1 | Supply of split AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc. |
||
| 1.5TR Split ACs | ||||
| a | 1.5 TR 3 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A. Makes: Mitsubishi MS-GK 18VA / O General ASGA18FTTC/Toshiba RAS18S3KPS | 1 No | 44500 | |
| b | 1.5 TR 3 Star capable of delivering 18000 BTU / hr and above with operating on refrigerant R-32 / R-410A Makes: Blue Star 3HW18VCTU / Daikin FTE-M or N Sereis / Hitachi / Voltas / Carrier Superia. | 1 No | 41500 | |
| 2.0 TR Split ACs | ||||
| c | 2.0 TR 3 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A Makes: Mitsubishi MS-GK24VA / O General ASG24FUTC/ Toshiba RAS24S3KPS | 1 No | 51500 | |
| d | 2.0 TR 3 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A Makes: / Hitachi / Blue Star 3HW24LBTU / Daikin / Voltas / Carrier Superia. | 1 No | 45500 | |
| Inverter Split AC Unts (Cooling Only) | ||||
| 245 | ELEC-5.5.2 | Supply of ...............INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation. | ||
| 0.8/ 1.0TR Split ACs | ||||
| a | 0.8 TR 5 Star capable of delivering 9600 BTU/hr and above with operating on refrigerant R-32/ R-410A Makes: Mitsubishi MSY- GN01VF/ O General ASGG09JLCA / Toshiba | 34500 | ||
| b | 0.8 TR 5 Star capable of delivering 9600 BTU/hr and above with operating on refrigerant R-32/ R-410A Makes: Blue star 5CNHW09PAFU/Carrier Superia/Hitachi/Daikin | 29500 | ||
| c | 1.0 TR 5 Star capable of delivering 12000 BTU/hr and above with operating on refrigerant R-32/ R-410A Makes: Mitsubishi MSY-GN13VF/ O General ASGG12CGTA/ Toshiba RAS13N3KCV | 38500 | ||
| d | 1.0 TR 5 Star capable of delivering 12000 BTU/hr and above with operating on refrigerant R-32/ R-410A Makes: Blue Star 5HW12PAFU / Carrier Supiria / Hitachi / Daikin | 33500 | ||
| 1.5, 1.8 & 2.0TR Split ACs | ||||
| e | 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes: Mitsubishi MS- GN18VF / O General ASGA18JCC/Toshiba RAS18N3KCV | 1 No | 48500 | |
| f | 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R- 410A,COP not less than 4.5 Makes: / Blue Star PAFU-DAFU series / Daikin FTKC50NVM / Hitachi | 1 No | 46500 | |
| g | 1.8/1.9TR 5star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: Mitsubishi MSY-GN22UF / O General /Toshiba RAS 22N 3KCV |
1 No | 57000 | |
| h | 1.8/1.9 TR 5 Star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: Blue star CAFU-OATU series / Hitachi / Daikin | 1 No | 54000 | |
| i | 2.0/2.2 TR 5 star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: Mitsubishi MS-GN26VF / O General ASGA24JCC/Toshiba | 1 No | 66500 | |
| j | 2.0 TR 5 Star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: Blue star BAFU-DAFU series / Hitachi / Daikin | 1 No | 59000 | |
| INVERTER CASSETTE TYPE AC UNITS | ||||
| 246 | ELEC-5.5.35 | Supply of .......... inverter Cassette type AC unit with ceiling mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc. complete with Wireless remote controller, without refrigerent piping and cable. | ||
| a | 1.5 TR 4 star Single Phase capable of delivering 18000 BTU / hr and above with operating on refrigerant R-32 / R-410A. Makes: Mitsubishi PLY- SP18BA / Toshiba RAV-SE561UP / O General. | 1 No | 73000 | |
| b | 2.0TR 4 star Single Phase capable of delivering 24000 BTU / hr and above with operating on refrigerant R-32 / R-410A, Makes: Mitsubishi PLY- SP24BA / O General AUGA2SFRTA / Toshiba RAV- SE801UP | 1 No | 78000 | |
| c | 2.0TR 4 star Single Phase capable of delivering 24000 BTU / hr and above with operating on refrigerant R-32 / R-410A Makes: Blue Star3HNCS24YAF/ Daikin / Carrier. | 1 No | 75000 | |
| d | 3.5 TR 4 star Three Phase capable of delivering 42000 BTU / hr and above with operating on refrigerant R-32 / R-410A, Makes: Mitsubishi PLY- SP42BA / O General /Toshiba | 1 No | 138000 | |
| e | 3.5 TR 4 star Three Phase capable of delivering 42000 BTU / hr and above with operating on refrigerant R-32 / R-410A Makes: Daikin / Bluestar / Carrier | 1 No | 135500 | |
| f | 4.0 TR 4 star Three Phase capable of delivering 48000 BTU / hr and above with operating on refrigerant R-32 / R-410A Makes: Mitsubishi PLY- SP48BA / O General / Toshiba RAV-SE1251UP | 1 No | 142000 | |
| g | 4.0 TR 4 star Three Phase capable of delivering 48000 BTU / hr and above with operating on refrigerant R-32 / R-410A Makes: Blue Star / Carrier / Daikin | 1 No | 129000 | |
| TOWER MODEL (Vertical) TYPE AC UNITS | ||||
| 247 | ELEC-5.5.36 | Supply of Slim line / Tower Model/Verticool type split AC unit with indoor unit and floor mounted outdoor condencing unit with 3.5 mtr of Copper piping,insulation kit and 4 mtr of 4 core copper flexible card with refrigerant 410A/R32, Hermetically sealed Scroll compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with cordless remote control |
||
| a | 3.0/ 3.3TR Three Phase capable of delivering 39600 BTU/hr and above woth operating on refrigerant R-32/R-410 Makes: Carrier /Daikin / Blue Star | 1 No | 91000 | |
| b | 3.8 /4.0TR Three Phase capable of delivering 45600BTU/hr and above woth operating on refrigerant R-32/R-410 Makes: Carrier /Daikin / Blue Star | 1 No | 96500 | |
| c | 4.5/ 4.6TR Three Phase capable of delivering 55200 BTU/hr and above woth operating on refrigerant R-32/R-410 Makes: Carrier /Daikin / Blue Star | 1 No | 105000 | |
| 5.6 | HVAC SYSTEMS(VRV/VRF) | |||
| 248 | ELEC-5.6.1 | Supply of Air cooled VRV / VRF Air Conditioning system of having high COP complete with indoor and outdoor units duly charged with refrigerant R-410A and oil (first charge) suitable for cooling with individual controller, (suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and complete with all accessories, fittings etc. The units shall be BMS Compatible. Outdoor Units shall be fully inverter system complete with 100% scroll/rotary compressor and drive arrangement, initial charge of refrigerant (R- 410A),refrigerant piping, drier, sight glass, dual pressure cutout all housed and supported properly in cabinet, air cooled condenser & its controller for following capacities. The VRV system shall be cooling only system. Makes: Mitsubishi /DAIKIN/Toshiba/O General |
||
| Type of Compressor : Hermitic sealed Inverter Scroll/Twin Rotary | ||||
| ODU should delvier the required capacity at the ambient conditions of the place as per ISHRAE Standards. | ||||
| The System should be highly energy efficient and COP shall not be less than 3.7. The outdoor units shall be suitable for operation between 5 and 53 deg C in cooling mode. | ||||
| a | 6 HP | 1 No | 145000 | |
| b | 8 HP | 1 No | 158000 | |
| c | 10 HP | 1 No | 196000 | |
| d | 12 HP | 1 No | 220000 | |
| e | 14 HP | 1 No | 249000 | |
| f | 16 HP | 1 No | 284000 | |
| g | 18 HP | 1 No | 312000 | |
| h | 20 HP | 1 No | 343000 | |
| 249 | ELEC-5.6.2 | Supply of Air cooled VRV / VRF Air Conditioning system of having high COP complete with indoor and outdoor units duly charged with refrigerant R-410A and oil (first charge) suitable for cooling with individual controller, (suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and complete with all accessories, fittings etc. The units shall be BMS Compatible. Outdoor Units shall be fully inverter system complete with 100% scroll/rotary compressor and drive arrangement, initial charge of refrigerant (R- 410A),refrigerant piping, drier, sight glass, dual pressure cutout all housed and supported properly in cabinet, air cooled condenser & its controller for following capacities. The VRV system shall be cooling only system. Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung |
||
| Type of Compressor : Hermitic sealed Inverter Scroll/Twin Rotary | ||||
| ODU should delvier the required capacity at the ambient conditions of the place as per ISHRAE Standards. | ||||
| The System should be highly energy efficient and COP shall not be less than 3.7. The outdoor units shall be suitable for operation between 5 and 53 deg C in cooling mode. | ||||
| a | 6 HP | 1 No | 133500 | |
| b | 8 HP | 1 No | 145000 | |
| c | 10 HP | 1 No | 180300 | |
| d | 12 HP | 1 No | 202400 | |
| e | 14 HP | 1 No | 229000 | |
| f | 16 HP | 1 No | 261000 | |
| g | 18 HP | 1 No | 287000 | |
| h | 20 HP | 1 No | 315000 | |
| ELEC-5.6.3 | Supply and Installation of Ref Nets for Double ODU connections | 1 No | 4800 | |
| 250 | ELEC-5.6.4 | Supply and Installation of Ref Nets for Triple ODU connections | 1 No | 9200 |
| 251 | ELEC-5.6.5 | Supply and Installation of Multi Connection Joint / Ref Nets for IDUs | 1 No | 4200 |
| 252 | ELEC-5.6.6 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: Mitsubishi /DAIKIN/Toshiba/ O General |
||
| Type Of Units :Hi Wall type units | ||||
| a | 1.0 TR | 1 No | 27500 | |
| b | 1.6 TR | 1 No | 30000 | |
| c | 2.0 TR | 1 No | 31000 | |
| ELEC-5.6.7 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung |
|||
| Type Of Units :Hi Wall type units | 1 No | 25300 | ||
| a | 1.0 TR | 1 No | 27600 | |
| b | 1.6 TR | 1 No | 28500 | |
| c | 2.0 TR | 1 No | ||
| 253 | ELEC-5.6.8 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: Mitsubishi /DAIKIN/Toshiba /O General |
||
| Type Of Units :Roundflow/4 way Cassette units | ||||
| a | 1.0 TR | 1 No | 36600 | |
| b | 1.5/1.6 TR | 1 No | 41000 | |
| c | 2.0 TR | 1 No | 42000 | |
| d | 2.6 TR | 1 No | 46000 | |
| e | 3.2 TR | 1 No | 47000 | |
| f | 4.0 TR | 1 No | 48000 | |
| g | 4.5 TR | 1 No | 50300 | |
| ELEC-5.6.9 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung |
|||
| Type Of Units :Roundflow/4 way Cassette units | ||||
| a | 1.0 TR | 1 No | 33600 | |
| b | 1.5/1.6 TR | 1 No | 37700 | |
| c | 2.0 TR | 1 No | 38600 | |
| d | 2.6 TR | 1 No | 42300 | |
| e | 3.2 TR | 1 No | 43200 | |
| f | 4.0 TR | 1 No | 44000 | |
| g | 4.5 TR | 1 No | 46200 | |
| 254 | ELEC-5.6.10 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: Mitsubishi /DAIKIN/Toshiba/ O General |
||
| Type Of Units :High Static Duct Units | ||||
| a | 3.2 TR | 1 No | 50300 | |
| b | 4.0 TR | 1 No | 52800 | |
| c | 4.5 TR | 1 No | 62500 | |
| d | 5.5 TR | 1 No | 84200 | |
| e | 6.3 TR | 1 No | 88700 | |
| f | 8.0 TR | 1 No | 93500 | |
| ELEC-5.6.11 | Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung |
|||
| Type Of Units :High Static Duct Units | ||||
| a | 3.2 TR | 1 No | 46000 | |
| b | 4.0 TR | 1 No | 48000 | |
| c | 4.5 TR | 1 No | 57500 | |
| d | 5.5 TR | 1 No | 77000 | |
| e | 6.3 TR | 1 No | 81000 | |
| f | 8.0 TR | 1 No | 86000 | |
| 255 | ELEC-5.6.12 | Supply, Installation, Testing & Commissioning Simple wireless remote contoller to control the IDUs with Machine coding, ON-OFF & Temp. setting of individual IDU and group of IDU. | 1400 | |
| 256 | ELEC-5.6.13 | Supply of Indoor Units consisting of 3/4 row deep DX coil, drain pan, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls, duly wired, thermostatic control corded/cordless remote controller supports for indoor units etc. Makes: Mitsubishi /DAIKIN/Toshiba/ O General |
||
| Type of Units : Ductable TFA Units | ||||
| a | 4TR | 1 No | 82650 | |
| b | 6TR | 1 No | 99600 | |
| c | 8TR | 1 No | 105000 | |
| ELEC-5.6.14 | Supply of Indoor Units consisting of 3/4 row deep DX coil, drain pan, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls, duly wired, thermostatic control corded/cordless remote controller supports for indoor units etc. Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung |
|||
| Type of Units : Ductable TFA Units | ||||
| a | 4TR | 1 No | 76000 | |
| b | 6TR | 1 No | 91000 | |
| c | 8TR | 1 No | 96500 | |
| HVAC-LOW SIDE WORKS | ||||
| 257 | ELEC-5.6.15 | Lifting, shifting, positioning, Installation and testing of the ODUs including all accessories with Vibration Isolators for ODUs etc., complete | ||
| a | 6 to 8 HP | 1 No | 7000 | |
| b | 10 to 12 HP | 1 No | 10000 | |
| c | 14 to 20 HP | 1 No | 12000 | |
| 258 | ELEC-5.6.16 | Lifting Shifting, Positioning ,Installation Testing and commissioning of the following indoor units with including all required accessoires etc complete., | ||
| Type Of Units :Hi Wall Units | 1 No | |||
| a | 1.0 TR to 2.0 TR | 1 No | 1200 | |
| 259 | ELEC-5.6.17 | Lifting Shifting, Positioning ,Installation Testing and commissioning of the following indoor units with including all required accessoires etc complete., | ||
| Type Of Units :Round Flow /4 way Cassette units | ||||
| a | 1.0 TR to 2.0 TR | 1 No | 1500 | |
| b | 2.6 TR to 4.5 TR | 1 No | 2500 | |
| 260 | ELEC-5.6.18 | Lifting Shifting, Positioning ,Installation Testing and commissioning of the following indoor units with including all required accessoires etc complete., | ||
| Type Of Units :High Static Duct Units | ||||
| a | 3.2 TR to 4.5 TR | 1 No | 3000 | |
| b | 5.5 TR to 8.0 TR | 1 No | 4500 | |
| 261 | ELEC-5.6.19 | Installation, testing & commissioning of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls duly wired, thermostatic control corded/cordless remote controller supports for indoor units etc. | ||
| Type of Units : Ductable TFA Units | ||||
| a | 4 TR to 8 TR | 1 No | 4500 | |
| Refrigerant Piping | ||||
| 262 | ELEC-5.6.20 | Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes:Totaline/Mandav/Mexico |
||
| The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm. The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm. |
||||
| Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations | ||||
| a | 34.9 mm dia | Rmt | 1150 | |
| b | 28.6 mm dia | Rmt | 1050 | |
| c | 22.2 mm dia | Rmt | 950 | |
| d | 19.1 mm dia | Rmt | 850 | |
| e | 15.9 mm dia | Rmt | 750 | |
| f | 12.7 mm dia | Rmt | 650 | |
| g | 9.5 mm dia | Rmt | 480 | |
| h | 6.4 mm dia | Rmt | 420 | |
| 263 | ELEC-5.6.21 | Supply, installation and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings(Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. |
||
| a | 25 mm dia | Rmt | 150 | |
| b | 32 mm dia | Rmt | 180 | |
| c | 40mm dia | Rmt | 220 | |
| d | 50 mm dia | Rmt | 260 | |
| Supply of PVC insulated 2 core 1.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990. ( Covered in Section -1) | Rmt | |||
| 264 | ELEC-5.6.22 | Supply and transportation of R 410A Gas for the system. | kg | 1050 |
| 265 | ELEC-5.6.23 | Providing Pressure testing of entire system with Nitrogen and vaccuming nitrogen for all indoor and outdoor units. The pressure testing shall be done as per OEM recommendation. | HP | 1250 |
| 266 | ELEC-5.6.24 | Supply, installation, testing &commissioning of Stand alone, intelligent Touch controller with Display for controlling the indoor & outdoor units from a Remote place for all the circuits. | No | 74000 |
| 267 | ELEC-5.6.25 | Supply, installation, testing & commissioning of GSS Ducting with required angle flanges & installation materials such as heavy duty supports by anchor fasteners etc as required asper IS 655 /SMACNA Standards Makes:TATA/Jindal | ||
| a | 24 G | sqm | 825 | |
| b | 22 G | sqm | 925 | |
| c | 20 G | sqm | 1100 | |
| d | 18 G | sqm | 1200 | |
| Thermal Insulation | ||||
| 268 | ELEC-5.6.26 | Supply &Fixing of Duct Thermal Insulation applied outside of the duct work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with adhesive and tapes. | ||
| 13 mm Thick | sqm | 580 | ||
| Accoustic Insulation | ||||
| 269 | ELEC-5.6.27 | Supply & Fixing of Duct Accoustic Insulation applied inside of the duct work with All. backed Open cell nitrile duly fixed with adhesive and tapes | ||
| a | 10/15 mm Thick | sqm | 900 | |
| 270 | ELEC-5.6.28 | Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for supply with removable core type with collar damper | sqm | 8500 |
| 271 | ELEC-5.6.29 | Supply, Installation, Testing and commissioning of extruded Aluminum powder coated grills/ diffusers for retrun with removable core type without collar damper | sqm | 6200 |
| 272 | ELEC-5.6.30 | Supply , Erection and Testing of GI Opposed blade Volume control dampers made out of 18G frame and 20G blades | sqm | 5400 |
| 273 | ELEC-5.6.31 | Supply , Erection of Fresh air louver with extruded aluminium grill with SS wire mesh and GI volume control damper with 20 micron filters | sqm | 4300 |
| 274 | ELEC-5.6.32 | Supply and Installation of Underdeck Insulation with 50 mm thk EPS, 48 Kg/Cum density, factory laminated faced alumimun foil coreved with GI cross wiring. | sqm | 650 |
| 275 | ELEC-5.6.33 | Supply and Installation of GI Fusible link Fire dampers 500 mm long with sleeve as per UL 555 Standard,Minimum width of damper shall be 225 mm. | sqm | 6500 |
| 276 | ELEC-5.6.34 | Supply and Installation of GI backdraft dampers as per UL 555 Standard, | sqm | 5400 |
| 277 | ELEC-5.6.35 | Supply, installation and testing of Canvas connection for the Treated Fresh Air units to the duct | each | 2200 |
| 5.7 | EVAPORATIVE AIR COOLING SYSTEM | |||
| 278 | ELEC-5.7.1 | Supply of single phase evaporative air cooling unit with a capacity of 9000 CFM consisting cabinet and water tank made of polypropylenematerial, blower water pump of 40W, single phase 1.20 KW motor axial type fan with variable speed, 20 micron filteration, noise levelless than 78 dBA with auto cleaning,humidity control and water lack protection etccomplete. Makes: Cool Breeze / Breeze Air | 1 No | 105000 |
| 279 | ELEC-5.7.2 | Supply of Three phase evaporative air cooling unit with a capacity of 12000 - 15000 CFM consisting cabinet and water tank made of polypropylene material, blower water pump of 40W, Three phase 3.0 KW motor axial type fan with 2 speed, 20 micron filteration, noise level less than 78 dBA with auto cleaning and water lack protection etc complete. Makes: Cool Breeze /Breeze Air | 1 No | 180000 |
| 280 | ELEC-5.7.3 | Supply and fixing of 13mm thick Nitrile insulation for out door unit. | 1 sft | 55 |
| 281 | ELEC-5.7.4 | Supply and fixing of 50mm thick glasswool of 24 kg density with alluminium foil insulation for indoor duct. | 1 sft | 58 |
| 282 | ELEC-5.7.5 | Supply and fixing of angular iron frame with 2 coats of zincromat red oxide for installation of air cooling unit | 1 No | 5000 |
| 283 | ELEC-5.7.6 | Installation and commissioning charges for air cooling unit | 1 No | 3600 |
| 5.8 | STABILIZERS | |||
| 284 | ELEC-5.8.1 | Supplly of ………... Stabilizer. Makes: V-Guard / Real Guard / Uni Stab / ITL. | ||
| a | 0.5 KVA | 1 No | 820 | |
| b | 1.0 KVA | 1 No | 1450 | |
| c | 3.0 KVA | 1 No | 2000 | |
| d | 4.0 KVA | 1 No | 2700 | |
| e | 5.0 KVA | 1 No | 3300 | |
| 285 | ELEC-5.8.2 | Supplly of Stabilizer. Makes: Keeline / Soft Line |
||
| a | 0.5 KVA | 1 No | 675 | |
| b | 1.0 KVA | 1 No | 1300 | |
| c | 3.0 KVA | 1 No | 1700 | |
| d | 4.0 KVA | 1 No | 2500 | |
| e | 5.0 KVA | 1 No | 3100 | |
| 5.9 | REPAIRING OF FANS, COOLERS, PUMPS, MOTORS, FRIDGES AND AIRCONDITIONERS | |||
| 286 | ELEC-5.9.1 | Rewinding of ceiling fan motor (starting and running winding) including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as required. (New model ceiling fan) | ||
| a | 900/1200 mm sweep | 1 No | 325 | |
| b | 1400 mm sweep | 1 No | 390 | |
| 287 | ELEC-5.9.2 | Charges for oiling, greasing, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing,refixing of fan from site and testing etc. as required | 1 No | 150 |
| 288 | ELEC-5.9.3 | Providing and Replacement of ball bearing of ceiling/ exhaust fan as required. (NBC/ SKF) | 1 No | 175 |
| 289 | ELEC-5.9.4 | Providing and Replacement of Gun metal bush of ceiling/ exhaust/cooler fan/ as required | 1 No | 150 |
| 290 | ELEC-5.9.5 | Servicing and overhauling of 20" sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. | 1 No | 250 |
| 291 | ELEC-5.9.6 | Painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required | 1 No | 450 |
| 292 | ELEC-5.9.7 | Replacement of cooler pads (heavy) set of 3 no. of size 25" x 27" | 1 No | 150 |
| 293 | ELEC-5.9.8 | Supply and fixing of Brass float valve of weighing approx. 250 gm, 8" long rod,PVC ball of 4" dia. For desert coler as required. | 1 No | 200 |
| 294 | ELEC-5.9.9 | Supply and fixing of adjustable M.S.grill 20/22 gauge of size approx. 24" x 26" including painting etc. as required | 1 No | 360 |
| 295 | ELEC-5.9.10 | Spray painting of ceiling fan of size 900/1200/ 1400 mm with two coats of white/ brown enamelled paint after cleaning with sand paper. Filling etc. as required. | 1 No | 175 |
| 296 | ELEC-5.9.11 | Rewinding of Heavy duty Exhaust fan motor including all necessary material,The motor is to be wound taking no. of coils,turns and pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as required. |
||
| a | 300/ 380 mm sweep | 1 No | 550 | |
| b | 450 mm sweep | 1 No | 650 | |
| c | 600 mm sweep | 1 No | 1100 | |
| 297 | ELEC-5.9.12 | Rewinding of 400 mm table fan/pedestal fan motor including all necessary material,The motor is to be wound taking no. of coils,turnsand pitch as it was originally wound with required size super enamelled wire with 'E' class insulation material and making connections etc. as required. | 1 No | 350 |
| 298 | ELEC-5.9.13 | Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. | 1 No | |
| a | 0.5 H.P. To 1.00 H.P. | 1 No | 700 | |
| b | 2.0 H.P | 1 No | 1150 | |
| 299 | ELEC-5.9.14 | Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. | ||
| a | 3.0 H.P. | 1 No | 1700 | |
| b | 5.0 H.P. | 1 No | 2400 | |
| c | 7.5 H.P | 1 No | 2600 | |
| d | 10.0 H.P | 1 No | 3500 | |
| e | 12.5 H.P | 1 No | 3700 | |
| f | 15.0 H.P | 1 No | 4500 | |
| 300 | ELEC-5.9.15 | Supply and charging of fresh refrigerant and testing of performance of air conditioner/ fridge/ water cooler of following capacity including capallary and strainer/ filter. |
||
| a | 1.0 TR Window/ Split A.C | 1 No | 1900 | |
| b | 1.5 TR Window/ Split A.C | 1 No | 2100 | |
| c | 2.0 TR Window/ Split A.C | 1 No | 2500 | |
| d | 25/50 / 40/80 Ltr. Water cooler | 1 No | 2000 | |
| e | 60/120 Ltr. Water cooler | 1 No | 2300 | |
| f | 150/150 Ltr. Water cooler | 1 No | 2800 | |
| g | 165 Ltr Refrigerator | 1 No | 1250 | |
| h | 200/210 Ltr Refrigerator | 1 No | 1800 | |
| i | 286/310 Ltr Refrigerator | 1 No | 2100 | |
| 301 | ELEC-5.9.16 | Replacement of defective compressor by company repaired compressor of fridge./water cooler including testing etc. as required. (Carrier/ Kirlosker/ Techam- Shah/ Shriram/ Voltas) | ||
| a | 25/50 / 40/80 Ltr. Water cooler | 1 No | 6000 | |
| b | 60/120 Ltr. Water cooler | 1 No | 7600 | |
| c | 150/150 Ltr. Water cooler | 1 No | 9000 | |
| d | 165 Ltr Refrigerator (Carrier/ Kirlosker/ Techam-Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator) | 1 No | 3100 | |
| e | 200/210 Ltr Refrigerator (Carrier/ Kirlosker/ Techam- Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator) | 1 No | 3800 | |
| f | 286/310 Ltr Refrigerator (Carrier/ Kirlosker/ Techam- Shah/ Shriram/ Voltas/ BPL/ Zenith/ Kelvinator) | 1 No | 4300 | |
| 302 | ELEC-5.9.17 | Supply of ……… brandnew Rotary type sealed compressor for Air conditioner Makes: DAIKIN/LG/Carrier/Kirloskar/Techam-shah | ||
| a | 1.0/1.5 TR | 1 No | 9500 | |
| b | 2 TR | 1 No | 10450 | |
| 303 | ELEC-5.9.18 | Replacement of condensing/ cooling coil of copper fins for following capacity A.C./ Water cooler/ Fridge as required | ||
| a | 1.0 TR A.C. | 1 No | 3565 | |
| b | 1.5 TR A.C. | 1 No | 4025 | |
| c | 2.0 TR A.C. | 1 No | 4485 | |
| d | 25/50 / 40/80 Ltr. Water cooler | 1 No | 2400 | |
| e | 60/120 Ltr. Water cooler | 1 No | 3500 | |
| f | 150/150 Ltr. Water cooler | 1 No | 3500 | |
| g | 165 Ltr Refrigerator | 1 No | 1100 | |
| h | 200/210 Ltr Refrigerator | 1 No | 1200 | |
| i | 286/310 Ltr Refrigerator | 1 No | 1550 | |
| 304 | ELEC-5.9.19 | Replacement of overload protection of A.C./ Water cooler as required | 1 No | 500 |
| 305 | ELEC-5.9.20 | Replacement of thermostat of A.C./ Water cooler/fridge as required. | 1 No | 450 |
| 306 | ELEC-5.9.21 | Replacement of starting relay of A.C/water cooler/fridge compressor as required | 1 No | 490 |
| 307 | ELEC-5.9.22 | Spray painting of complete fridge (inside and outside ) of 165/ 200/286/310 Ltr. Capacity | 1 No | 1600 |
| 308 | ELEC-5.9.23 | Supply and fixing of 230V/ 275V, 50Hz rating ………. | ||
| Starting capacitor | ||||
| a | 20-60 micro farad | 1 No | 200 | |
| b | 80-150 micro farad | 1 No | 400 | |
| Running capacitor | 1 No | |||
| a | 2.5/3.15/4.0/6.0 micro farad | 1 No | 75 | |
| b | 8.0 micro farad | 1 No | 110 | |
| c | 10.0 micro farad | 1 No | 150 | |
| d | 15.0 to 36.0 micro farad | 1 No | 350 | |
| 309 | ELEC-5.9.24 | Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit. | 1 Set | 1200 |
| 310 | ELEC-5.9.25 | Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev. Nitrile Insulation: Kflex/ Totaline /Armaflex |
||
| a | 1/2" x 1/4" | 1 Mtr | 810 | |
| b | 5/8" x 1/4" | 1 Mtr | 890 | |
| c | 3/4" x 3/8" | 1 Mtr | 975 | |
| d | 7/8" x 1/2" | 1 Mtr | 1100 | |
| e | 1 1/8" x 5/8" | 1 Mtr | 1350 | |
| 311 | ELEC-5.9.26 | Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton Window A.C.Unit Makes : Crompton / AU. | 1 No | 1425 |
| 312 | ELEC-5.9.27 | Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. / NYLON. | 1 No | 250 |
| 313 | ELEC-5.9.28 | Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / NYLON. |
1 No | 430 |
| 314 | ELEC-5.9.29 | Fan blade for 1.0 / 1.5 Ton A.C.Machine. | 1 No | 500 |
| 315 | ELEC-5.9.30 | Installation of Split Air Conditioners. | 1 No | 1600 |
| 316 | ELEC-5.9.31 | Removing of existing Split Air Conditioners without damaging to copper pipe. | 1 No | 600 |
| 317 | ELEC-5.9.32 | Installation of Cassette type Split Air Conditioners. | 1 No | 4000 |
| 318 | ELEC-5.9.33 | Installation of Tower type Split Air Conditioners. | 1 No | 3000 |
| 319 | ELEC-5.9.34 | Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of 3.5 /4.50 TR Casseete AC unit. | 1 Set | 1700 |
*****