ELECTRO-MECHANICAL-4



    SECTION 6    
  6.1 SWAGED / OCTAGONAL POLES AND GARDEN POSTS  
320 ELEC-6.1.1 Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications.  The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete.(Rate per K. G) 1 Kg 67
321 ELEC-6.1.2 Fabrication and Supply of M.S. Poles for garden posts with 'B' class 60.25mm outer dia with base plate and suitable pole cap including cost and conveyance of all material including fixing of luminaire and labour charges etc., complete. (Rate per K. G) 1 Kg 61
322 ELEC-6.1.3 Supply of different sizes of M. S. Pipe brackets (Rate per K.G) 1 Kg 61
    OCTOGONAL POLEs    
323 ELEC-6.1.4 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet  as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 11760
324 ELEC-6.1.5 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet  as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 17000
325 ELEC-6.1.6 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet  as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 18690
326 ELEC-6.1.7 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet  as per IS specification suitable to withstand the wind speed of 180 KMPH for 12 mtrs height Pole having dimensions Bottom  240mm,  Top 100mm with 4mm thick, base plate 320 x320 x20mm and 4 Nos of M24 x 850 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 27000
    DECORATIVE DRAGON TYPE BRACKET WITH POLE  
327 ELEC-6.1.8 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitableboards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180KMPH for 9 Mtrs Mounting height Pole having dimensions Bttom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J' bolts along with templates. Including Supply of1.5M Dragon typedecorative  ...................
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
  a galvanised double arm with PU Painted bracket. 1 No 26600
  b galvanised Single arm with PU Painted bracket. 1 No 22800
  c Double arm GalvanizeFinished bracket 1 No 22500
  d Single arm GalvanizeFinished bracket 1 No 20400
328 ELEC-6.1.9 Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs Mounting height Pole having dimensions Bottom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000long 'J' bolts along with templates. Including Supply of 1.5M Dragon type decorative
Makes :  Bajaj / Valmont /Transrail/Utkarsh/ Skipper/
/United
1 No DELETED
329 ELEC-6.1.10 Fabrication, Transportation and supply of hot-dip                   PU Paint finish
Curved Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet  and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs Mounting height Curved Pole having dimensions Bottom 180 mm,. Top 85mm with 3mm thick, base plate 400 x 400 x 20mm and 4 Nos of M24 x 750 long 'J' bolts along with templates. Including Supply of 0.2M long Single arm bracket.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
  a Galvanized 1 No 22300
  b Galvanized PU paint finshed 1 No 30200
    POLE BRACKETS    
330 ELEC-6.1.11 Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 1300
331 ELEC-6.1.12 Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 1720
332 ELEC-6.1.13 Fabrication, Transportation and supply of 1 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 1610
333 ELEC-6.1.14 Fabrication, Transportation and supply of 1.50 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 2900
334 ELEC-6.1.15 Fabrication, Transportation and supply of 1.5 Mtr Length Single Arm   suitable size decorative galvanized  Bracket  with PU paint colour finish etc complete.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 4800
335 ELEC-6.1.16 Fabrication, Transportation and supply of 1.5 Mtr Length  Double Arm   suitable size decorative galvanized  Bracket  with PU paint colour finish etc complete.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 9100
336 ELEC-6.1.17 Fabrication, Transportation and supply of  of 1.5mtrs sword type or any decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 5300
337 ELEC-6.1.18 Fabrication, Transportation and supply of  of 1.5mtrs sword type or any decorative Single arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 4100
338 ELEC-6.1.19 Fabrication, Transportation and supply of  of 1.0mtrs sword type or any decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 4300
339 ELEC-6.1.20 Fabrication, Transportation and supply of  of 1.0 mtrs sword type or any decorative Single arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 3600
    HIGH MAST POLES    
340 ELEC-6.1.21 Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom  360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections  and single speed motor with M24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 105000
341 ELEC-6.1.22 Fabrication, transportation and supply of 16 Mtrs Polygon High Mast with two sections of Bottom 4mm thick and Top section with 3mm thick with GLS type aviation lamp of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 560mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections  and single speed  motor with M24 x 800 mm foundation bolts of required quantity with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 138000
342 ELEC-6.1.23 Fabrication, transportation and supply of 20 Mtrs Polygon High Mast with two sections of Bottom 4mm thick and Top section with 3mm thick of Bottom 460mm and Top 150mm  dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections  and single speed  motor with M30 x 750 mm foundation bolts of required quantity with GLS type aviation twin lamp.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
1 No 178500
    FEEDER PILLAR BOXES    
343 ELEC-6.1.24 Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A  FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm  3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. 1 No 18300
344 ELEC-6.1.25 Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A  FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 Sqmm  3 core copper cable for internal wiring , contactor, connectors and provision for energy meter etc., complete for finished item of work. 1 No 18900
    ERRECTION- HIGH MAST POLES    
345 ELEC-6.1.26 Earth work exacavation with a approximate quantity of
4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.
1 No 28400
346 ELEC-6.1.27 Earth work exacavation with a approximate quantity of
6.0 Cum for errection of 16 Mtrs high mast and refilling with a quantity of 0.65 Cum of PCC 1:4:8, 2.60 Cum M 20 grade concrete and (110 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.
1 No 35500
347 ELEC-6.1.28 Earth work exacavation with a approximate quantity of
7.0 Cum for errection of 20 Mtrs high mast and refilling with a quantity of 0.75 Cum of PCC 1:4:8, 3.60 Cum M20 grade concrete and (140 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.
1 No 45600
348 ELEC-6.1.29 Supply of ……. Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts    for cable entry including terminals etc., complete (sizes in mm)   Make : Hensel
  a 155 X 210 X 92 1 No 1650
  b 205 X 255 X112 1 No 2400
  c 225 X 295 X 122 1 No 8450
  d 255 X 600 X 170 1 No 9300
    FOUNDATION AND ERRECTION CHARGES OF POLES  
349 ELEC-6.1.30 Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion  with 4 Nos, 8" Anchor bolts with chemical treatment with  suitable "J" type bolts etc duly drilling holes to RCC slab  with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days  etc. including cost and conveyance of all material and all labour charges etc.complete as directed by the department officers. 1 Job 4200
350 ELEC-6.1.31 Foundation and erection charges with special T&P, for
7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.
1 Job 4900
351 ELEC-6.1.32 Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x
1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including  excavation of Earth/BT all labour charges and
cost and conveyance of materials etc.complete.
1 Job 6600
352 ELEC-6.1.33 Foundation and erection charges with special T&P, for 12Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.67Mtr x 0.67Mtrs x 1.50 Mtr size M20 cc work vibrated concreting mixing withnecessary steel (20kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including  excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete. 1 Job 8100
    GRP POLES    
353 ELEC-6.1.34 Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip/Helipole
  a …do…. 3.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 8500
  b …do…. 4.00 Mtrs height, Bottom dia  143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 10800
  c …do….  6.00 Mtrs height, Bottom dia  143mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 13500
  d …do….  8.00 Mtrs height, Bottom dia  193mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 17400
  e …do….  9.00 Mtrs height, Bottom dia  210mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 19000
  f …do….  10.00 Mtrs height, Bottom dia  227mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr 1 No 27500
354 ELEC-6.1.35 Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole
  a …do…. For 3.00 Mtrs Pole 1 No 1550
  b …do…. For 4.00 Mtrs Pole 1 No 1550
  c …do…. For 6.00 Mtrs Pole 1 No 1850
  d …do…. For 8.00 Mtrs Pole 1 No 2150
  e …do…. For 9.00 Mtrs Pole 1 No 4100
  f …do…. For 10.00 Mtrs Pole 1 No 5100
  6.2 LT PANEL AND ACCESSORIES    
355 ELEC-6.2.1 Supply Installation Testing and commissioning of  free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be  abricated from CPRI approved fabricator). 1 sqm 4250
356 ELEC-6.2.2 Supply and fixing of…………….. bus bar by means of  SMC / DMC type insulator, high tensile nuts and bolts spring  washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves
  a Electrolytic grade aluminium bus bar kg 375
  b Electrolytic grade copper bus bar kg 750
357 ELEC-6.2.3 Supply and Fixing  of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec
  a Analog type ( 96 mm x 96 mm ) 1 No 850
  b Digital type 1 No 1900
358 ELEC-6.2.4 Supply and Fixing  of CT operated direct reading type Ammeter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Make: Conzerve/Elmeasure/ Meco/HPL/L&T/Schneider/AE/Socomec
    Analog type ( 96 mm x 96 mm )    
  a Below 500 A 1 No 850
  b Above 500A 1 No 850
    Digital type    
  c Below 500 A 1 No 1900
  d Above 500 A 1 No 1900
359 ELEC-6.2.5 Supply and Fixing  of Current Transformer , with all necessary support in existing panel including connection etc. as required Make: Kappa/L&T/Seimens/C&S/Schneider
  a up to 150 / 5 Ratio , 5 VA , class 1 accuracy 1 No 475
  b from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy 1 No 700
  c from 500 / 5 to 1600/5 Ratio , 15 VA , class 1 accuracy 1 No 950
  d from 2000 / 5 to 3200 /5 Ratio , 15 VA, class 1 accuracy 1 No 1500
360 ELEC-6.2.6 Supply and Fixing of selector switch for voltmeter (4 position ) including making connection etc. as required Make: L&T /C&S/SALZER/HPL 1 No 340
361 ELEC-6.2.7 Supply and Fixing of CT linked selector switch of 10 A for Ampere meter (4position ) including making connection etc. as requiredMake: L&T
/C&S/SALZER/HPL
1 No 375
362 ELEC-6.2.8 Supply and fixing of single phase Electronic energy Meter,…       AC,50 HZ as per
IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.
Makes: CONZERVE / ELMEASURE / MECO /  HPL / HAVELLS/L&T.
  a Single Phase 1 No 1000
  b Three Phase 1 No 2800
363 ELEC-6.2.9 Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamp with integral circuit, terminal block, including connection etc. as required
  a Red/yellow/Green colour 1 No 120
  b Blue colour 1 No 200
364 ELEC-6.2.10 Supply and Fixing of Tap-off boxes suitable for following size of approved design
  a up to 95 sq. mm.( 3.5/4 core ) 1 No 400
  b from 120 sq. mm. to 185 sq. mm.( 3.5/4 core ) 1 No 700
365 ELEC-6.2.11 Supply and Fixing  of energy analyser (multy function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect. 1 No 10500
366 ELEC-6.2.12 Supply Installation Testing and commissioning of  self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required.Makes: L&T/Seimens/Epcos/Schneider/Havells
  a Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) 1 KVAR 200
  b Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) 1 KVAR 300
367 ELEC-6.2.13 Supply Installation Testing and commissioning of microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and following way, self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required Makes: L&T/Seimens/Epcos
/Schneider/ ABB/Neptune
    6 to 14 stage - sensitivity upto 50 milli Amp 1 No 18500
368 ELEC-6.2.14 Supply and Fixing of Cam operated rotary switches on existing panel with 2 way and off position makes: L&T (SALZER)/ABB/Schneider/Seimens/C&S/HPL
    one pole    
  a 16 A 1 No 350
  b 32 A 1 No 450
  c 63 A 1 No 650
    Two pole    
  d 16 A 1 No 400
  e 32 A 1 No 530
  f 63 A 1 No 875
    Three pole    
  g 16 A 1 No 500
  h 32 A 1 No 700
  i 63 A 1 No 1250
    Four pole    
  j 16 A 1 No 500
  k 32 A 1 No 750
  l 63 A 1 No 1400
369 ELEC-6.2.15 Supply and Fixing of  ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, Din rail mounting type including making connections, testing etc. as required Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
    3 pole AC3 Rating contactors    
  a Up to 12 Amp 1 No 800
  b 13 to 32 Amp 1 No 1325
  c 35 to 40 Amp 1 No 1600
  d 41 to 50 Amp 1 No 3500
    4 pole AC 1 Rating contactors    
  e Up to 25 Amp 1 No 1000
  f 26 to 32 Amp 1 No 1200
  g 33 to 45 Amp 1 No 2000
  h 46 to 60 Amp 1 No 4200
370 ELEC-6.2.16 Supply and Fixing  of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick dischargedamping resistors/ reactors to limit the inrush current ,conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type ncluding making  onnections, testing etc. as required. suitable for following capacity capacitor bank Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
  a Up to 6 KVAR 1 No 1600
  b 7 to 10 KVAR 1 No 1800
  c 11 to 20 KVAR 1 No 2700
  d 21 to 25 KVAR 1 No 3600
  e 30  KVAR 1 No 5200
  f 40  KVAR 1 No 8300
  g 50 KVAR 1 No 9600
371 ELEC-6.2.17 Supply and Fixing of  thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
  a Up to 14 A 1 No 1200
  b 15 to 20 A 1 No 1600
  c 21 to 30 A 1 No 2300
  d 31 to 40 A 1 No 2600
372 ELEC-6.2.18 Supply and Fixing of  push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL
  a Non luminous type 1 No 95
  b Luminous type 1 No 130
  6.3 SUB STATION EQUIPMENT AND TRANSFORMERS  
373 ELEC-6.3.1 Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: 1 No 24000
    (i) Provision for fixing Trivector Meter (To be supplied by DISCOMs)
    (ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs)
    (iii)TT Block    
    (iv) 6mm Bakelite sheet on all sides.    
    Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type  Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc complete for finished item of work.
a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC.
b) HT HRC fuse upto 63A - 3 nos.
c) Bus bar connection.
d) Indication lamps.
e) Manual trip Push buttion.
Make:ABB/ Megawin/Amara Raja/L&T
120000
    33 KV HT Panel (drawout type)    
374 ELEC-6.3.2 Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, 33 KV 800A VCB Panel with 3 Nos. VCBs suitable for 50Hz 3- phase system, suitable for 31.5kA/3sec short circuit withstand capacity & 31.5kA/1sec Internal Arc capacity. Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271-200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 sqmm XLPE 33 kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.
(Note - Cost of end termination not included in this item.) Makes:ABB/Schneider/Seimens/Kirloskar/Amara Raja/Megawin
1No 2655000
    INCOMER 1 No. each comprising the following    
    1 No. 800 Amp. VCB. 31.5KA    
    1 No. Integral Earth switch for line side earthing    
    3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection
    3 No. Cast Resin 33000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB.
    1 No. Digital voltmeter with selector switch.    
    1 No. Digital Ammeter with selector switch.    
    1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.
    1 No. Multi-function meter.    
    Set of MCBs for Panel AC/DC    
    Set of MCBs for Main AC/DC    
    Set of Indication lamps LED types    
    TNC Switch, L-R Switch, Pushbuttons for ON-OFF    
    OUTGOING 2 Nos. each comprising the following    
    1 No. 800 Amp. VCB.31.5KA    
    1 No. Integral Earth switch for line side earthing    
    3 No. dual core CTs 300A/1/1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection
    1 No. Digital Ammeter with selector switch.    
    1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.
    Set of MCBs for Panel AC/DC    
    Set of Indication lamps LED types    
    TNC Switch, L-R Switch, Pushbuttons for ON-OFF    
    11KV HT Panel (drawout type)    
375 ELEC-6.3.3 Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, 11 KV 800A VCB Panel with 3 Nos. VCBs suitable for 50Hz 3- phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity. Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271-200 as amended up to date and as per Technical specifications, IP4X for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ON-OFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3x185 to 3x 400 sqmm XLPE 11kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.
(Note - Cost of end termination not included in this item.)
1No 1345000
    Makes:ABB/Schneider/Seimens/Kirloskar/Amara Raja/Megawin    
    INCOMER 1 No. each comprising the following    
    1 No. 800 Amp. VCB. 26.3KA    
    1 No. Integral Earth switch for line side earthing    
    3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection
    3 No. Cast Resin 11000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy and 30VA burden max with and protection fuses / MCB.
    1 No. Digital voltmeter with selector switch.    
    1 No. Digital Ammeter with selector switch.    
    1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.
    1 No. Multi-function meter.    
    Set of MCBs for Panel AC/DC    
    Set of MCBs for Main AC/DC    
    Set of Indication lamps LED types    
    TNC Switch, L-R Switch, Pushbuttons for ON-OFF    
    OUTGOING 2 Nos. comprising the following    
    1 No. 800 Amp. VCB. 26.3KA    
    1 No. Integral Earth switch for line side earthing    
    3 No. dual core CTs 300A/1/1A of 7.5VA burden max and accuracy Class 0.5 for metering and class 5P10 for protection
    1 No. Digital Ammeter with selector switch.    
    1 No. Microprocessor based numerical relays with O/L, E/F and S/C protection with Integrated Arc sensing feature alongwith trip/lockout / antipumping / aux. relays.
    Set of MCBs for Panel AC/DC    
    Set of Indication lamps LED types    
    TNC Switch, L-R Switch, Pushbuttons for ON-OFF    
    Oil Immersed TRANSFORMERS    
376 ELEC-6.3.4 Supply and Transportation  of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 33 KV as per energy efficiency level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)     etc., complete  and as per the following continuous rating Make:ABB/ALSTOM/SEIMENS/Kirloskar/Voltamp/  Esennar/KPEL
  a 630 KVA 1 No 980000
  b 1000 KVA 1 No 1250000
  c 1250 KVA 1 No 1500000
  d 1600 KVA 1 No 1860000
  e 2000 KVA 1 No 2300000
377 ELEC-6.3.5 Supply and Transportation  of ISI marked copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONANtype , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)
+10% to -10%,  etc., complete  and as per the following continuous rating Make:Schneider/Kirloskar/Voltamp/  Esennar/ Toshiba/ KPEL/ Powertech
  a 100 KVA 1 No 325500
  b 160 KVA 1 No 550000
  c 250 KVA 1 No 650000
  d 315 KVA 1 No 800000
  e 500 KVA 1 No 1050000
  f 630 KVA 1 No 1130000
  g 1000 KVA 1 No 1480000
    Dry Type transformers    
378 ELEC-6.3.6 Supply  ,Transportation    of cast Resin (Dry Type)  indoor type copper double wound 33KV/0.433 KV, Three Phase 50 HzTransformers  desingned and manufactured as per IS 11171/IEC 60726 , ANSI and NEMA Standards with all standard fittings,connected Delta on Primary side and    Star on Secondary side with additional neutral brought out on load side 33000/433V with HV off load tap changing +5% to -15%  temperature rise by the resistance 90 degrees with terminal arrangement Cable box on HV side and Bus duct on LV Side with off circuit Tap links  etc.,,  complete Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Voltamp/  Esennar
  a 1000 KVA 1 No 2650000
  b 1250 KVA 1 No 3300000
  c 1600 KVA 1 No 3990000
  d 2000 KVA 1 No 4800000
  e 2500 KVA 1 No 5400000
379 ELEC-6.3.7 Supply  ,Transportation    of cast Resin (Dry Type)  indoor type copper double wound 11KV/0.433 KV, Three Phase 50 HzTransformers  desingned and manufactured as per IS 11171/IEC 60726 , ANSI and NEMA Standards with all standard fittings,connected Delta on Primary side and    Star on Secondary side with additional neutral brought out on load side 11000/433V with HV off  load tap changing +5% to -15%  temperature rise by the resistance 90 degrees with terminal arrangement Cable box on HV side and Bus duct on LV Side , with off circuit Tap links  etc.,,  complete  .
Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Voltamp/  Esennar
  a 250 KVA 1 No 651000
  b 315 KVA 1 No 756000
  c 500 KVA 1 No 918000
  d 630 KVA 1 No 1102500
  e 750 KVA 1 No 1260000
  f 1000 KVA 1 No  
  6.4 MAINTENANCE AND REPAIRS OF TRANSFORMERS  
380 ELEC-6.4.1 Carryout   routine maintenance, servicing and testing of 630A to 1000A L.T.ACB by cleaning fixed contacts, moving contacts and arcchutes  including servicing and putting the ACB in perfect working condition after detting all relay and ON, OFF mechanism etc done with only manufacturing companies 1 No 5000
381 ELEC-6.4.2 Carryout routine maintenance and servicing of LT.Cubical pannel board having approximately 15 to 22 Nos  of switches cleaning with power blower and servicing the contacts, tightning the connection of incoming and outgoing cables, and checking  the operating machanism for smooth functioning of switches and putting them in smooth working condition. 1 No 3000
382 ELEC-6.4.3 Routine maintenance of transformer, including testing of insulation resistance, oil break down strength.
Reconditioning / replacement of silicazel, cleaning of transformer and topping upto  oil  level if required (extra cost will be paid for oil).
1 No 4500
383 ELEC-6.4.4 Testing of Transformer oil for dielectric breakdown strength. 1 No 600
384 ELEC-6.4.5 Removing  the existing transformer from the plinth / Pole and refixing the standby transformer of following capacity including connections etc., complete………….
  a up to 315 KVA 1 No 3500
  b 500 / 1000 KVA 1 No 4500
385 ELEC-6.4.6 Replacing old and unserviceable gasket of top cover plate of transformer having following capacity. -…………
  a up to 315 KVA 1 No 750
  b 500 / 1000 KVA 1 No 1000
386 ELEC-6.4.7 Replacing old and unserviceable gasket   of  bushing for the following Transformer capacity. -………….
  a up to 315 KVA     HT, 1 No 350
  b 500 / 1000 KVA   HT, 1 No 750
  c up to 315 KVA     LT, 1 No 900
  d 500 / 1000 KVA   LT, 1 No 1500
387 ELEC-6.4.8 Replacement the H T / L. T burntout  winding coils of distribution transformer including rewinding, varnishing and vaccuming etc.,duly retaining the removed burnt winding coils by the Contractor / Firm- …….
  a For copper coils 1 Kg 600
  b For aluminium coils 1 Kg 400
387 ELEC-6.4.9 Insulating HT / LT copper / aluminium coils for Transformers. 1 Kg 325
388 ELEC-6.4.10 Painting to transformer with 2 coats Zinchromate red oxide duly scraping existing paint  followed by 2 coats of hammerton grey paint etc., complete. -……….
  a Upto 500 KVA 1 No 3500
  b 630 / 1000 KVA 1 No 4500
389 ELEC-6.4.11 Replacing                for distribution Transformer by new one.  
  a H.T bushing 1 No 350
  b H.T bushing with metal parts 1 No 400
  c L.T bushing             Upto 315 KVA 1 No 200
  d L.T bushing             500 / 1000 KVA 1 No 250
  e L.T bushing rod with metal parts    up to 315 KVA 1 No 500
  f L.T bushing rod with metal parts    500/1000 KVA 1 No 1850
390 ELEC-6.4.12 Drying the repaired transformer with appropriate heat / air of following capacity of transformers. ……..-
  a Upto 315 KVA 1 No 4400
  b 500  / 1000KVA 1 No 5500
391 ELEC-6.4.13 Loading, transportation and Unloading of transformer from site to Workshop or vice verse. ………
  a Upto 500 KVA 1 No 4500
  b 630 / 1000 KVA 1 No 7000
392 ELEC-6.4.14 Supply of new and tested transformer oil as per IS-335
- 1972 (per Ltr)
1 Ltr 120
393 ELEC-6.4.15 Filteration of transformer oil as per ISS specifications filters to dielectric strength above 40KV ……..
  a at site. (per Ltr) excluding transportation 1 Ltr 10
  b at workshop (per Ltr) 1 Ltr 7
  6.5 OVERHEAD LINES& LINE MATERIALS    
394 ELEC-6.5.1 Supply and transportation   of                   PSCC Poles  
  a 8.0 Mtr ,Working load-140 Kgs 1No 2150
  b 8.0 Mtr ,Working load-200 Kgs 1No 2275
  c 9.1 Mtr ,Working load-280 Kgs 1No 4150
395 ELEC-6.5.2 Supply and transportation of  9 mtr length                  RS Joist Poles
  f 150 x 75 mm(Wt of the pole-140 Kgs) 1No 8600
  g 175 x 85 mm(Wt of the pole-215Kgs) 1No 13250
  h 150 x 150 mm(Wt of the pole-333 Kgs) 1No 20500
396 ELEC-6.5.3 Supply and errection of GI stay set of dia            including stay clamps , turn buckle
and GI stay wire tight end through strain insulator including excavation of pit and cc work etc.,complete
  a 20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm 1 set 1850
  b 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm 1 set 1400
397 ELEC-6.5.4 Supply and fixing of  11KV -V- cross arms with                        duly welded with
necessary clamping arrangements etc., complete
  a 75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs) 1 No 1200
  b 65 x65 x6 MS angle (8.2 Kgs) 1 No 850
398 ELEC-6.5.5 Supply and fixing of  LT 3 phase 4 wire  cross arm of length 3' 8" with……. and necessary clamping arrangements ,cutting ,drilling and welding etc., complete
  a 50 x 50 x6 mm MS angle ( wt 5.75 Kgs) 1 No 415
  b 65 x65 x6 MS angle (wt 7 Kgs) 1 No 490
399 ELEC-6.5.6 Supply and fixing of  LT 3 phase 5 wire cross arm of length 4' 5" with……. and necessary clamping arrangements ,cutting ,drilling and welding etc., complete
  a 50 x 50 x6 mm MS angle ( wt 7.30Kgs) 1 No 535
  b 65 x65 x6 MS angle (wt 9.60 Kgs) 1 No 675
400 ELEC-6.5.7 Supply and fixing of  LT  single phase 3 wire cross arm  with 50 x 50 x6 mm MS angle of 2' 5" ( wt 4.20 Kgs ) and necessary clamping arrangements ,cutting ,drilling and welding etc., complete 330
401 ELEC-6.5.8 Supply and fixing of  11 KV pin Insulator (IS 731/1971 ) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., each 200
402 ELEC-6.5.9 Supply and fixing of               LT pocelain pininsulator as per IS 1447-1997 suitable
for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,
  a 100 x 65 mm each 80
  b 100 x 85 mm each 90
403 ELEC-6.5.10 Supply and fixing of               LT pocelain shackle insulator as per IS 1443-1979
suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,
  a 75 x 90 mm each 140
  b 100  x 110 mm each 170
404 ELEC-6.5.11 Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070  with mounting base on the existing DP structure each 2500
405 ELEC-6.5.12 Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 nos 24 KV
/22 KV post Insulators( IS 5350, Hot dipped Hard ware, fuse wire of required size etc., complete
each 5500
406 ELEC-6.5.13 Supply and fixing of  11 KV danger plates on the existing poles each 100
407 ELEC-6.5.14 Supply and fixing of  11 KV ,400 A 3 phase central post rotating double break  type AB switch(isolator) as per IS 9921) without earth blade,gang operated
,Hozizontal type,operating mechanism with GI spring loaded reverse loop type fixed contact,solid HD electrolytic copper tubular moving contact with silver/Nicle plated at end points,9 Nos post insulators of 12 Kv(IS 2594 and IS 5350) ,Hot Dip galvenizing hardware,GI pipe,Nuts and bolts etc., complete.,
each 18000
408 ELEC-6.5.15 Supply and Transportation of Over Head  …………. Conductor as per  IS 398 (PART - II) : 1996
  a 7/3.55 ACSR Rabbit   (214 Kg/KM) 1KM  
  b 7/2.59 ACSR  weasel (128 Kg/KM) 1KM  
  c 7/2.11 ACSR  squirrel (85 Kg/KM) 1KM  
  d 100 sqmm AAA 1KM 50953
  e 55 sqmm AAA 1KM 29490
  f 34 sqmm AAA 1KM 17685
409 ELEC-6.5.16 Supply and errecting fencing section having size 2045 mt height from ground level and 1.2 mt width by using angle iron size 50 x50 x6 mm errected in cc foundation 15 x15x40 cm deep . The section of the frame shall be fitted with flat iron support of size 25 x 6 mm on top , bottom an dmid way and chain link  jolley of 3.26 mm dia /10 SWG GI hard wire mesh of 50 x50 mm to the angle iron at every distance of 30 cm , by iron studs complete duly painted with one coat of red oxide and 2 coats of aluminium paint, 1 No As per DATA
410 ELEC-6.5.17 Supply and errecting double leaf hinged door each 150 cm in width and 180 cm in height using 40 mm dia B grade ISI mark GI pipe from all 4 sides with necessary bends and cross supports of angle iron 45 X45 X5 mm with the door leaf covered with chain links jolley  50 X 50 mm made from 3.26 mm dia/10 SWG Gi wire with necessary flat iron covering all round with necessary no of spikes of size 10 mm dia  at top and bottom at 150 mm apart to match the height of fencing. The door shall have latches and side channel of 100 X50 X5 mm regidly welded for providing locking arrangement Godrej/Navtal make medium size lock with duplicate keys, fencing completely errected and painted with anti corrosive red oxide paint and 2 coats of prescribed enamel paint/silver paint. The Channel iron of size 150X75 mm by 2.5 mtr long shall be provided and errected at both sides of gate. 1 No As per DATA
411 ELEC-6.5.18 Supply and errecting 50 X50X6 mm angle iron corner support  0.5 mt way from the fence supports fixed at the middle fencing frame and other side in cc foundation 15 X15X 40 cm complete duly painted with 1 coat of red oxide and 2 coats of alluminum paint. 1 No As per DATA
412 ELEC-6.5.19 Providing and spreading HBG metal of size 40 mm size for 100 mm depth above the ground level. As per DATA
  ELEC-6.5.20 Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete. 1 No 10000
  ELEC-6.5.21 Providing CTPT plinth 600mm x 600mm x 2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc., complete. 1 No 6000
  6.6 LIGHTENING PROTECTIVE SYSTEM    
    Advanced LPS    
  ELEC-6.6.1 a Supply of ESE Air Terminal of external wide area of protection system based on  proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high- quality, non corrosive and  weather resistant XL-304 Stainless Steel Having triggering advance r t =30µs, Protection Radius ranging from 48 Meters in Level-I to 71 Meters in Level-IV  when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of  25mm.
Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND
1 No 95000
  ELEC-6.6.1 b Supply of ESE Air Terminal of external wide area of protection system based on  proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high- quality, non corrosive and weather resistant XL-304 Stainless Steel Having triggering advance r t =50µs, Protection Radius ranging from 68 Meters in Level-I to 95 Meters in Level-IV when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of  25mm.
Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND
1 No 100000
413 ELEC-6.6.1 c Supply of ESE Air Terminal of external wide area of protection system based on  proactive Early Steamer Emission (ESE) Technology manufactured in accordance with NFC 17-102:2011, is made of high- quality, non corrosive and  weather resistant XL-304 Stainless Steel Having triggering advance r t =60µs, Protection Radius ranging from 79 Meters in Level-I to 107 Meters in Level-IV  when installed on a 5 Meters Mast. ESE terminal is capable to withstand Current
Impulses of 40kA (5 Shots of 8/20µs wave shape) and having capturing rod dia of
25mm.
Make : THUNDERGUARD(EARTHPLUS)/ KALRE/ NIMBUS / FOREND
1 No 114000
414 ELEC-6.6.2 Installation and commissioning of advanced lighting protection systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of GI Mast with stay wire.
6. Installation of Earth Electrodes
7. Interconnection between the Electrodes
8. Termination of down conductor to earth bus etc complete.
1 No 29000
415 ELEC-6.6.3 Supply  of 6 Digit Electronic/Mechanical counter Make: EARTHPLUS (THUNDER
GUARD) / NIMBUS / KALRE / FOREND
1 No 15000
416 ELEC-6.6.4 Supply of G.I mast of 5 Meters length, 50 mm Dia, with FRP Collar (Insulating Bush) Base Plate & Complete Fitting Accessories with Supporting Guy Wire (Stay Wires) and all fitting accessories 1 Set 6000
418 ELEC-6.6.5 Supply of IEC 62561-7 compliant Eco-friendly, Maintenance free, anti-corrosive, lead-free, super conductive, mineral based high-grade earthing compound, To enhance soil conductivity. With resistance <0.12 ohms-meter, Sulphur Free, Should be tested as per IEC-62561-7 for resistance Toxic Elements, Leachable elements etc. 25 Kg Bag
Make: EARTHPLUS /CIRPROTEC / INDALAC / INGESCO
1 No 2200
419 ELEC-6.6.6 Supply of Bentonite Moisture Retaining Powder 30 Kg Bag 1 No 170
420 ELEC-6.6.7 Supply of Concrete Earth Pit of Dimensions: Width: 320 mm, Length: 320 mm, Height: 192mm, Weight 30 Kgs, Load bearing Capacity: 5000 Kgs 1 No 1500
    CONVENTIONAL LPS AS PER IS/IEC 62305    
    Air Terminal    
421 ELEC-6.6.8 Supply, installation, testing and commissioning of 8 mm Aluminum Round Conductor complete  as per requirements of DIN EN 50164-2 (VDE 0185 part 202)
& VDE 0185-305 (IS/IEC 62305)
1 RM 90
422 ELEC-6.6.9 Supply, installation, testing and commissioning of Roof conductor holder  for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance each 50
423 ELEC-6.6.10 Supply, installation, testing and commissioning of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black  @ 1 meter distance.
each 130
424 ELEC-6.6.11 Supply, installation, testing and commissioning of Fang Fix Junior system - Inclusive of Al intrception rod of 1Mtr length(10mm dia ) , Quick mounting of the interception rod in the base using plug technology each 1650
425 ELEC-6.6.12 Supply, installation, testing and commissioning of  cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised  iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts each 132
426 ELEC-6.6.13 Supply, installation, testing and commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU.Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS- IEC 62305)(2nos/expansion piece ). each 395

*****