ELECTRO-MECHANICAL-6



  8.2 LEGEND PLATES    
513 ELEC-8.2.1 Danger Notice Plates of size                          , shall comply with IS:2551-1982
  a 250x200mm, 1 No 225
  b 200x150mm, 1 No 200
  c 150x100mm, 1 No 100
514 ELEC-8.2.2 Bus bar chamber 100mm x 40mm 1 No 50
515 ELEC-8.2.3 Cable Alley 100mm x 40mm 1 No 50
516 ELEC-8.2.4 Earth 40mm x 20mm 1 No 50
517 ELEC-8.2.5 Auto / Manuual 1 No 50
518 ELEC-8.2.6 Semi ovel type alluminium anodized legend plates ON
/ OFF / Forward / Reverse / Start / Stop / UP / DOWN / R Phase / Y Phase / B Phase / Trip / Open / Close / Left / Right / Motor on / Motor off / Accept / Retract / Reset / Emergency / Running / Pump off / Emergency Stop / Emergnecy on / Slow.
1 No 25
519 ELEC-8.2.7 Shock instrution chart in English / Hindi / Telugu duly framed with front glass 1 No 450
  8.3 COPPER / ALLUMINIUM / G.I. ITEMS (PER KG)    
520 ELEC-8.3.1 Copper Plate / Strip / SWG wire No.8 / 10 / 14 1 kg 590
521 ELEC-8.3.2 Copper winding wire 1 kg 680
522 ELEC-8.3.3 Copper winding wire with PVC Insulated of fine quality 1 kg 700
523 ELEC-8.3.4 Alluminum Bus bars / Strips / Accessories 1 kg 230
524 ELEC-8.3.5 Alluminum winding wire 1 kg 300
525 ELEC-8.3.6 G.I. Strip / Plate / Wire 1 kg 65
  8.4 SMC TYPE SUPPORTS FOR THE BUSBARS    
526 ELEC-8.4.1 Supply of type supports for the bus bars-------------    
  a 50 x 70 x 14 mm 1 No 30
  b 60 x 70 x 14 mm 1 No 35
  c 70 x 70 x 14 mm 1 No 65
  d 300 x 50 x 10 mm 1 No 20
  e 350 x 52 x 10 mm 1 No 160
  f 420 x 60 x 12 mm 1 No 230
527 ELEC-8.4.2 DMC Earth Flat Supports 20 x3 mm / 20x 6mm / 25 x 6mm / 25 x 3mm / 32 x 3 mm / 32 x 6mm / 40 x 3 mm / 40 x 6mm 1 No 50
528 ELEC-8.4.3 Heat shrinkable sleeves for the Bus bars up to 70 Sqmm 1 Mtr 15
529 ELEC-8.4.4 Heat shrinkable sleeves for the Bus bars above 70 Sqmm 1 Mtr 25
530 ELEC-8.4.5 8 mm LED series bulb    (54 Nos.) Set 300
531 ELEC-8.4.6 8 mm LED series bulb with Navar Patta  (250/300 Nos.) with necessary control gear Set 2500
  ELEC-8.4.7 LED RGB pixel series bulbs(50 Nos) Set 550
  ELEC-8.4.8 LED RGB pixel series bulbs with Navvar Patta(150 Nos) with necessary control gear Set 4500
  ELEC-8.4.9 Supply of 3W X54 LED RGB PAR cans with IP 67 protection 1 No 9500
533 ELEC-8.4.10 Supply and fixing of 6mm thick MS Chekered plate. 1 Kg 70
534 ELEC-8.4.11 Supply and fixing of 6mm thick Alluminium Chekered plate 1 Kg 250
535 ELEC-8.4.12 Copper old winding Wire scrap for 1 Kg 1 Kg 150
536 ELEC-8.4.13 Cement 1 Kg 8
537 ELEC-8.4.14 Cost of Sand 1 Cum 600
538 ELEC-8.4.15 Cost of Bricks 1000 Nos 4000
539 ELEC-8.4.16 Hylam Sheet 1 Sq inch 1
540 ELEC-8.4.17 Supply of Nominal-Bore                    G.I.Pipe    
  a 25mm Heavy grade 1 mtr 280
  b 25mm Medium grade 1 mtr 245
  c 40mm Heavy grade 1 mtr 420
  d 40mm Medium grade 1 mtr 350
541 ELEC-8.4.18 80mm Nominal Bore C.I.Earth Pipe of 3 Mtrs Length 1 no 3400
542 ELEC-8.4.19 Earth work excacvation including all soils for trench, Pole Pit and Earth Pit 1 cum 250
543 ELEC-8.4.20 Drilling of 16 Nos through holes of 12mm dia to G.I pipe 1 No 6
544 ELEC-8.4.21 G.I Nuts, Bolts and Washers each set 1 set 12
545 ELEC-8.4.22 18" dia 2" thick hume pipe ring 1 No 250
546 ELEC-8.4.23 18" dia 3" hume pipe ring 1 No 300
547 ELEC-8.4.24 2" thick CC cover for hume pipe ring with handle. 1 No 130
548 ELEC-8.4.25 Supply of Saddle / Clamps suitable for fixing ------------------  
  a 4 to 10 Sqmm 2 Core Cable 100 Nos 230
  b 4 & 6 Sqmm 4 Core Cable 100 Nos 230
  c 10 & 16 Sqmm 4 Core Cable 100 Nos 300
  d 25 & 35 Sqmm 3.5 Core Cable. 100 Nos 350
  e 50 Sqmm 3.5 Core Cable. 100 Nos 500
  f 70 & 95 Sqmm 3.5 Core Cable 100 Nos 550
  g 120 to 185 Sqmm 3.5 Core Cable 100 Nos 700
  h 240 & 300 Sqmm 3.5 Core Cable 100 Nos 850
  i 400 Sqmm 3.5 Core Cable 100 Nos 1100
549 ELEC-8.4.26 Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with----------------
  a Class A insulation having 2mm thickness upto 3.3KV 1 sqmt 3800
  b Class B insulation having 2.5mm thickness upto 11KV 1 sqmt 3900
  c Class C insulation having 3mm thickness upto 33KV 1 sqmt 4000
550 ELEC-8.4.27 Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook. ( MR ) 1 no 270
551 ELEC-8.4.28 Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint. 1 no 1100
552 ELEC-8.4.29 Supply of GI Louver shutter for exhaust fan    
  a 9 to 12" 1 no 150
  b 15 to 18" 1 no 180
553 ELEC-8.4.30 EICHER  model  11:10  with  100  H.  P  direct injestion  4 stroke engine with one spare wheel 3800 mm cabin high deck with jangla (full body) (4 wheeler) for generator 1 No 620000
  8.5 LABOUR RATES    
554 ELEC-8.5.1 Skilled Electrician 1 No  
555 ELEC-8.5.2 Semi Skilled Electrician / Lineman 1 No  
556 ELEC-8.5.3 Helper (Electrical) 1 No  
557 ELEC-8.5.4 Skilled Mason 1 No  
558 ELEC-8.5.5 Semi Skilled Mason 1 No  
559 ELEC-8.5.6 Skilled Welder 1 No  
560 ELEC-8.5.7 Skilled Fitter 1 No  
561 ELEC-8.5.8 Semi Skilled Fitter / Welder 1 No  
562 ELEC-8.5.9 Skilled Carpenter 1 No  
563 ELEC-8.5.10 Semi Skilled Carpenter 1 No  
564 ELEC-8.5.11 Man Mazdoor 1 No  
565 ELEC-8.5.12 DG Set operator/Air Compressor Operator 1 No  
566 ELEC-8.5.13 2nd Class DG Set operator/Air Compressor Operator 1 No  
567 ELEC-8.5.14 Plumber (Licensed)/Pipe Fitter 1 No  
568 ELEC-8.5.15 Painter Class -2 1 No  
569 ELEC-8.5.16 Diploma Engineer / Surveyor 1 No  
570 ELEC-8.5.17 Graduate Engineer 1 No  
571 ELEC-8.5.18 ITI Certificate holder 1 No  
572 ELEC-8.5.19 Stenographer / Computer Operator 1 No  
    NB : The labour rates may be adopted based on the common Civil SoR for the year 2018-19
  9.1 WIRELESS FIRE ALARAM SYSTEM    
573 ELEC-9.1.1 Supply and fixing of wireless smoke detection control panel of 28 wireless zones, 2 Hard wired Zones, Tamper Alert, Pass code protected, RF jamming recognition, diagnostic feature for RF signal strength between panel and each detector, vent reporting using PSTN telephone line, dialing upto 4 telephone numbers, event reporting as per users choice, LCD screen display, two way voice interaction, battery backup stand by time up to 12 hrs. Including transportation, all taxes and all labour charges etc complete.
Makes: Cease Fire / Visonic / Honeywell
1 No 35000
574 ELEC-9.1.2 Supply and fixing of Wireless Repeater.The wireless repeater extends the communication range of detection by relaying data between receiver and remote wireless transmitter including transportation, all taxes and all labour charges etc complete.
Makes: Cease Fire / Visonic / Honeywell.
1 No 8500
575 ELEC-9.1.3 Supply and fixing of Wireless Siren Strobe external wireless siren - a fully supervised power code outdoor (IP55) wireless Siren and strobe light. Designed for external installation. Wire - Free connection between control panel and siren. Convenient rapid no- mess installation. Separate fire alarm signals, 98db Piezo siren and high power strobe light. Weather resistant, IP55, 2-way communication for local and remote diagnostics. Plug-in power supply, NIMH rechargeable back-up power battery, transmits status, tamper, low- battery, supervisory and AC loss messages to the control panel, Tri- State tamper switch identifies screw manipulation removal of cover or playing from the wall including transportation, all taxes and all labour charges etc complete.
Makes: Cease Fire / Visonic / Honeywell.
1 No 11500
576 ELEC-9.1.4 Supply and fixing of wireless Fully Supervised Smoke Detector, Photoelectric detection technology for superior detection sensitivity , sound and transmitted for smoke, tamper and low battery, works on power code protocol, easy programming and enrolling to the control panel, long life 9 volt alkaline or lithium battery including transportation, all taxes and all labour charges etc complete.
Makes: Cease Fire / Visonic / Honeywell.
1 No 5750
  9.2 ADDRESSABLE - FIRE ALARM SYSTEM    
1 2 3 4 5
577 ELEC-9.2.1 Supply, Installation, testing and commissioning of wall mounting              Micro
Processor  based analog addressable fire  alarm Control  panel expandable by minimum 2 additional loops with minimum 80 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as perUL and FM/EN54 & VDS standards  and as required fixing of              Micro processor based Fire
Alarm control panel with zonal indictions and battery back up as per detailed specifications.
Makes: Notifier / Edwards/Bosch
  a 1 loop 1 No 175000
  b 2 loop 1 No 200000
  c 4 loop 1 No 245000
  d 6 loop 1 No 365000
  e 8 loop 1 No 400000
  f 10 loop 1 No 550000
577 ELEC-9.2.2 Supply, Installation, testing and commissioning of wall mounting              Micro
Processor  based analog addressable fire  alarm Control  panel expandable by minimum 2 additional loops with minimum 80 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as perUL and FM/EN54 & VDS standards  and as required fixing of             Micro processor based Fire Alarm
control panel with zonal indictions and battery back up as per detailed specifications.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara
  a 1 loop 1 No 157000
  b 2 loop 1 No 176000
  c 4 loop 1 No 204000
  d 6 loop 1 No 295000
  e 8 loop 1 No 342000
  f 10 loop 1 No 490000
578 ELEC-9.2.3 Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.
Makes: Notifier / Edwards/Bosch
1 No 105000
579 ELEC-9.2.4 Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara
1 No 85500
580 ELEC-9.2.5 Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.
Makes: Notifier / Edwards/Bosch
1 No 4600
581 ELEC-9.2.6 Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3700
582 ELEC-9.2.7 Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.
Makes: Notifier / Edwards/Bosch
1 No 4500
583 ELEC-9.2.8 Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 4000
584 ELEC-9.2.9 Supply and instllation of intallegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories.
Makes: Notifier / Edwards/Bosch
1 No 3800
585 ELEC-9.2.10 Supply and instllation of intallegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3350
586 ELEC-9.2.11 Supply and installation of intelligent analogue addressable rate of rise cum fixed temparature  heat detectors including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.
Makes: Notifier / Edwards/Bosch
1 No 4100
587 ELEC-9.2.12 Supply and installation of intelligent analogue addressable rate of rise cum fixed temparature  heat detectors including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3600
588 ELEC-9.2.13 Supply and installation of intelligent analogue addressable multi criterion detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.
Makes: Notifier / Edwards/Bosch
1 No 4200
589 ELEC-9.2.14 Supply and installation of intalligent analogue addressable multi criterion detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3600
590 ELEC-9.2.15 Supply and Installation of Intelligent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required.
Makes: Notifier / Edwards/Bosch
1 No 4200
591 ELEC-9.2.16 Supply and Installation of Intelligent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3700
592 ELEC-9.2.17 Supply and Installation of Intelligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required.
Makes: Notifier / Edwards/Bosch
1 No 4200
593 ELEC-9.2.18 Supply and Installation of Intelligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3700
594 ELEC-9.2.19 Supply and Installation of Intelligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. Makes: Notifier / Edwards/Bosch 1 No 3800
595 ELEC-9.2.20 Supply and Installation of Intelligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required.
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara.
1 No 3000
  9.3 CONVENTIONAL - FIRE ALARM SYSTEM    
596 ELEC-9.3.1 Supply, Installation, testing and commissioning of conventional Micro processor based Fire Alarm panel with ……., 12V SMF batteries etc., complete with all standard accessories. Makes: System Censor / Ravel/Vertex
  a 2 Zone 1 No 13500
  b 4 Zone 1 No 14500
  c 6 Zone 1 No 15000
  d 8 Zone 1 No 15500
  e 10 Zone 1 No 19500
  f 12 Zone 1 No 22500
  g 14 Zone 1 No 25500
597 ELEC-9.3.2 Supply and installation of Repeater panel including the cost of mounting accessories complete as per specifications and as required.
Makes: Makes: System Censor / Ravel/Vertex
1 No 12000
598 ELEC-9.3.3 Supply and installation of duel tone electronic hooter of 85dB including the cost of mounting accessories complete as per specifications and as required.Makes: System Censor / Ravel/Vertex 1 No 750
599 ELEC-9.3.4 Supply and installation of dust and vermin proof manual call point to initiate audio visual alarm including the cost of mounting accessories complete as per specifications and as required.Makes: System Censor / Ravel/Vertex 1 No 600
600 ELEC-9.3.5 Supply and installation of response indicators for above false ceiling detectors.Makes: System Censor / Ravel/Vertex 1 No 150
601 ELEC-9.3.6 Supply and installation of plug - in type multi criterion detectors including the cost of base plate. 75mm dia
M.S. outlet box for fixing of the detector base. Mounting accessories etc., complete as per specifications as required.
Makes: Makes: System Censor / Ravel/Vertex
1 No 1600
602 ELEC-9.3.7 Supply and installation of plug -in type photo electric smoke detectors including the cost of base plate.
75mm dia MS outlet box for fixing of the detector base. Mounting accessories etc complete and as per specifications and as required.
Makes: System Censor / Ravel/Vertex
1 No 1400
603 ELEC-9.3.8 Supply and installation of plug -in type rate of rise cum fixed temperature heat detectors including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.
Makes: System Censor / Ravel/Vertex
1 No 1300
  9.4 POWDER BASED FIRE EXTINGUISHERS    
604   Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM  Rubbers, Pressure Guage, which work effectively on all  class of fires (A, B, C & Electrical fires) with 5 years warranty  Including transportation, all taxes and all labour charges etc complete.
  ELEC-9.4.1 Makes : Cease Fire / Minimax 1 No 8100
  ELEC-9.4.2 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 5200
605   Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 2 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 3.6 kg, empty wt.1.6 kg,  Discharge time minimum 8 sec, controllable discharge mechanism, range min. 2 mts applicable on classes A,B, C & electrically started fire, A rating -2 A, B rating -21 B,  can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.
  ELEC-9.4.3 Makes : Cease Fire / Minimax 1 No 4000
  ELEC-9.4.4 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 3400
606   Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 6.9 kg, empty wt.2.9 kg,  Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B,  can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.
  ELEC-9.4.5 Makes : Cease Fire / Minimax 1 No 5700
  ELEC-9.4.6 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 3800
607   Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg,  Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B,  can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.
  ELEC-9.4.7 Makes : Cease Fire / Minimax 1 No 6500
  ELEC-9.4.8 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 5200
    CLEAN AGENT FIRE EXTINGUISHERS    
608   Supply and fixing of ISI mark (IS:15683) Clean Agent HCFC 123, 2 KGFire exitinguisher , Stored pressure type, pressure guage, gross weight 3.7Kg , empty weight 1.7 Kg,  discharge time minimum 8 secs, controllable discharge mechanism, range minimum 2 meters, applicable on class A,B,C and electrically started Fire, A rating- 1A, B rating-21B, can construction: Deep drawn & CO2 mig welded, Valve construction: Forging & Machining, Internal coating of Can: Epoxy powder coating, External coating of can: Epoxy polyster powder coating, sheet metal thickness: 1.60 mm, Helium leak detection tested, 5 Years warranty
  ELEC-9.4.9 Makes : Cease Fire / Minimax 1 No 11600
  ELEC-9.4.10 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 9600
609   Supply and fixing of ISI mark (IS:15683) Clean Agent HCFC 123, 4 Kg Fire exitinguisher , Stored pressure type, pressure guage, gross weight 6.9Kg , empty weight 2.9 Kg,  discharge time minimum 8 secs, controllable discharge mechanism, range minimum 2 meters, applicable on class A,B,C and electrically started Fire, A rating- 1A, B rating-21B, can construction: Deep drawn & CO2 mig welded, Valve construction: Forging & Machining, Internal coating of Can: Epoxy powder coating, External coating of can: Epoxy polyster powder coating, sheet metal thickness: 1.60 mm, Helium leak detection tested, 5 Years warranty.
  ELEC-9.4.11 Makes : Cease Fire / Minimax 1 No 19500
  ELEC-9.4.12 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 17500
610   Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI  marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc complete.
  ELEC-9.4.13 Makes : Cease Fire / Minimax 1 No 8900
  ELEC-9.4.14 Makes : Safex / Kenex / Bharat / Reliance/NewTech 1 No 6700
611 ELEC-9.4.15 Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton. Makes: Cease Fire or its equivalent make Model- 1ES01 1 No 1200
612 ELEC-9.4.16 Supply and fixing of Cease fire or its equivalent Escape gear Mild Steel box size 425mmx360mmx140mm Epoxy powder coated to protect it from Weathering , smoke hood tested to Eupropean Standard EN 403 1993-S known to reduce Carbon Monoxide, propend(acrloein), hydrogen chloride, hydrogen Cyanide and Solid  and liquid toxic particles to manageable level for atleast 15 minutes shall with stand tempeartures upto 80 degrees single use only Fire Blanket size 1.2m x1.8m used to cover any vessel containing used to Extinguish a clothing fire wrap blanket around the victim. 1 No 13500
613 ELEC-9.4.17 Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket. 1 Set 1200
614 ELEC-9.4.18 Supply and fixing of Fire bucket stand fabricated by
M.S. angles to install for Four numbers of buckets as per local fire officers standards.
1 Set 1500
    AEROSOL GENERATION SYSTEM
(An alternative to water based sprinkler system)
  ELEC-9.4.19 Supply,Installationand commissioning   of  Auto Detection and Suppression System using Non Pressurised  Aerosol Generator System with detection of thermocord  to make the system standalone. It can be used  for  all classes of fire, The product Min. Life shall be 15 years and no Maintenance.  The Discharge time shall be 8 sec.  The Generator has a net weight of 0.5 kg. Active Substance of 50gms. The Generator has a capacity to cover 1 m³.
Makes: SEAARA/AGS/SALAMANDRA
1 No 4500
  ELEC-9.4.20 Supply,Installationand commissioning   of  Auto Detection and Suppression System using Non Pressurised  Aerosol Generator System with detection of thermocord and Inbuilt Aerosol Sprinkler  flexibility of adjusting it for a temperature of 57/68/93/141 degree centigrade as per  the site environment to make the system standalone. It can be used  for  all classes of fire, The product Min. Life shall be 15 years and no Maintenance.The Discharge time shall be 18 sec.  The Generator has a net weight of 2 kg. Active Substance of 300 gms. The Generator has a capacity to cover 6 m³.
Makes: SEAARA/AGS/SALAMANDRA
1 No 35000
  ELEC-9.4.21 Supply,Installationand commissioning   of  Auto Detection and Suppression System using Non Pressurised  Aerosol Generator System with detection of thermocord and Inbuilt Aerosol Sprinkler  flexibility of adjusting it for a temperature of 57/68/93/141 degree centigrade as per  the site environment to make the system standalone . It can be used  for  all classes of fire, The product Min. Life shall be 15 years and no Maintenance. The Discharge time shall be 22 sec.  The Generator has a net weight of 3 kg. Active Substance of 0.5 kg. The Generator has a capacity to cover 10 m³.
Makes: SEAARA/AGS/SALAMANDRA
1 No 45000
  ELEC-9.4.22 Supply,Installationand commissioning    of  Auto Detection and Suppression System using Non Pressurised  Aerosol Generator System with detection of thermocord and Inbuilt Aerosol Sprinkler  flexibility of adjusting it for a temperature of 57/68/93/141 degree centigrade as per the site environment to make the system standalone to make the system standalone. It can be used  for  all classes of fire, The product Min. Life shall be 15 years and no Maintenance. The Discharge time shall be 45 sec. The Generator has a net weight of 4.6 kg. Active Substance of 1 kg. The Generator has a capacity to cover 20 m³. Makes: SEAARA/AGS/SALAMANDRA 1 No 65000
  ELEC-9.4.23 Supply,Installationand commissioning   of  Auto Detection and Suppression System using Non Pressurised  Aerosol Generator System with detection of thermocord and Inbuilt Aerosol Sprinkler  flexibility of adjusting it for a temperature of 57/68/93/141 degree centigrade as per the site environment to make the system standalone to make the system standalone. It can be used  for  all classes of fire. The product Min. Life shall be 15 years and no Maintenance.  The Discharge time shall be 56 sec.The Generator has a net weight of 5.6 kg. Active Substance of 2 kg. The Generator has a capacity to cover 40 m³.
Makes: SEAARA/AGS/SALAMANDRA
1 No 82000
  ELEC-9.4.24 Supply,Installationand commissioning    of  Auto Detection and Aerosol Suppression System using Non Pressurised Aerosol Generator System with detection of thermocord and Inbuilt Aerosol Sprinkler  flexibility of adjusting it for a temperature of 57/68/93/141 degree centigrade as per  the site environment to make the system standalone. It can be used  for  all classes of fire, The product Min. Life shall be 15 years and no Maintenance. The Discharge time should  be 80 sec. The Generator has a net weight of 8 kg. Active Substance of 4 kg.  The Generator has a capacity to cover  80 m³.
Makes: SEAARA/AGS/SALAMANDRA
1 No 93000
  ELEC-9.4.25 Supply,Installationand commissioning  of Aerosol Fire suppression control Panel is basically a 10 Zone conventional panel with LED indications for sensors is open or fire. When the fire is detected by Sprinkler, Aerosol gets activated. 10 Aerosol Sprinkler input and 10 Aerosol Generator outputs provided. The Panel consists of 10 individual manual operation switch and one master switch to activate 10 Aerosol Generator outputs simultaniously 1 No 70000
  ELEC-9.4.26 Supply,Installationand commissioning  of Aerosol control Switch is a Controller for Activation of Each Aerosol Generator
Makes: SEAARA/AGS/SALAMANDRA
1 No 19500
  ELEC-9.4.27 Providing 'Fire Retardant Paint 1 hr Fire Resistance can be used to 'flame retard only 100 % cotton fabric, is normally used 'to treat coarse fabric e.g. tents etc. and gives coverage of 'approx. 120 to 130 sq.ft. to a fabric of 275-325 gsm. 'Can be applied 'Meant only for 100% cotton and coarse fabric like canvas '/ tents, natural wood etc.
Makes: SEAARA/AGS/SALAMANDRA
1 No 1900
  ELEC-9.4.28 Providing 'Flame retard any kind of fabric, be it 100% polyester or '100% cotton. It is normally used to flame 'retard upholstery, curtains, carpets etc., gives a coverage 'of approx. 120 to 130 sq.ft. to a fabric of 275-325 gsm. 1 No 2600
  ELEC-9.4.29 Providing 'Fire Retardant coat towards passive protection to sustain 'up to 1000 Deg.C. for 1 hour. This product can be used for 'all the materials such as cable, steel, wood, cloth  & 'concrete surface etc. 1 No 4200
  9.5 FIRE HYDRANT AND SPRINKLER SYSTEM    
    ELECTRIC DRIVEN MAIN FIRE PUMPS(SPLIT CASE)  
615 ELEC-9.5.1 Supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following complete in all respect as required 1 Set 320000
    a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 1620 lpm at 56 Mtr. head conforming to IS 1520
    b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
616 ELEC-9.5.2 Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 360000
    a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr. head conforming to IS 1520
    b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
617 ELEC-9.5.3 Supplying Installation, testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following Complete in all respect as required. 560000
    a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with  stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280 LPM and 120 Metres head conforming to IS 1520.
    b)Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325
    c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
    d)Suitable CC foundation of 1:2:4 ratio ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) duly plastered and with anti vibration pads
Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar
618 ELEC-9.5.4 Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required. 1 Set 415000
    a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 70 Mtr. head conforming to IS 1520
    b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
  ELEC-9.5.5 Supplying Installation, testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following Complete in all respect as required. 1 Set 580000
    a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with  stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2850 LPM and 120 Metres head conforming to IS 1520.
    b)Suitable HP SQ cage induction motor, TEFC, synchronous speed 1470 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325
    c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
    d)Suitable CC foundation of 1:2:4 ratio ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) duly plastered and with anti vibration pads
    DIESEL ENGINE DRIVEN FIRE PUMPS    
619 ELEC-9.5.6 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 416000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg
/ sq.cm. at highest and farthest outlet at specified flow of 1620 lpm at 56 Mtr head
conforming to IS 1520
    b) Suitable HP, 1500 RPM water cooled  with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
620 ELEC-9.5.7 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 600000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg
/ sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr head
conforming to IS 1520
    b) Suitable HP, 1500 RPM water cooled  with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
621 ELEC-9.5.8 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 725000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg
/ sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 120 Mtr head conforming to IS 1520
    b) Suitable HP, 1500 RPM water cooled  with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
622 ELEC-9.5.9 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 680000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg
/ sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 70 Mtr head
conforming to IS 1520
    b) Suitable HP, 1500 RPM water cooled  with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
623 ELEC-9.5.10 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 775000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg
/ sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 120 Mtr head conforming to IS 1520
    b) Suitable HP, 1500 RPM water cooled  with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
    ELECTRIC DRIVEN MAIN FIRE PUMPS(END SUCTION)  
624 ELEC-9.5.11 Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 240000
    a) End suction back pull out centrifugal pump, Std fitted with BRONZE IMPELLER &  gland packing ,capacity 171 Cum/hr (2850 LPM) at total head 70 M at operating speed 2900 rpm. Pump duty as per TAC
    b) 55 KW / 75 HP, 3000 srpm, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class „F? insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
625 ELEC 9.5.12 Supplying , installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 196000
    a) End suction back pull out centrifugal pump, Std fitted  with BRONZE IMPELLER &  gland packing ,capacity 137 Cum/hr (2280 LPM) at total head 70 mwc at operating speed 2900 rpm. Pump duty as per TAC
    b) 45 KW / 60 HP, 3000 srpm, TEFC (IP55) Horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class „F? insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 225 M frame
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
626 ELEC 9.5.13 Supplying, installation, Testing and commissioning of Electric engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 144000
    a) End suction back pull out centrifugal pump, Std fitted  with BRONZE IMPELLER &  gland packing ,capacity 97 Cum/hr (1620 LPM) at total head 56 mwc at operating speed 2900 rpm. Pump duty as per TAC
    b)  30 KW / 40 HP, 3000 srpm, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class „F? insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump.
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
    DIESEL ENGINE  DRIVEN MAIN FIRE PUMPS(END SUCTION)
627 ELEC-9.5.14 Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 499000
    a) End suction back pull out pump, Std fitted with BRONZE Impeller  & gland packing, capable of delivering 171 Cum/hr(2850 LPM) at a total head of 70 M when operated at 1800 rpm and pump duty as per TAC
    b) Liquid cooled, 85 BHP at 1800 rpm, diesel engine (Radiator cooled) 12 Volts starting system with standard accessories
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
628 ELEC-9.5.15 Supplying, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 398000
    a) End suction back pull out pump, Std fitted with BRONZE Impeller  & gland packing, capable of delivering 137 Cum/hr(2280 LPM) at a total head of 70 M when operated at 2150 rpm and pump duty as per TAC
    b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine (Radiator cooled) 12 Volts starting system with standard accessories
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
629 ELEC-9.5.16 Supplying , installation, Testing and commissioning of Diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 348000
    a) End suction back pull out pump, Std fitted with BRONZE Impeller  & gland packing, capable of delivering 97 Cum/hr(1620 LPM) at a total head of 56 M when operated at 2150 rpm and pump duty as per TAC
    b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator cooled) 12 Volts starting system with standard accessories
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins.
Makes of Pumps  : Kirloskar / Mather&Platt
    JOCKEY PUMPS    
630 ELEC-9.5.17 Supplying , installation , testing and commissioning of electric driven  pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 49000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  180 lpm at 56 Mtr head conforming to IS 1520
    b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55  class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
631 ELEC-9.5.18 Supplying , installation , testing and commissioning of electric driven  pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required 1 Set 72000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  180 lpm at 70 Mtr head conforming to IS 1520
    b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55  class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
632 ELEC-9.5.19 Supplying , installation , testing and commissioning of electric driven  pressurisation / Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required 1set 110000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  180 lpm at 120 Mtr head conforming to IS 1520
    b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55  class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
    BOOSTER PUMPS    
632 ELEC-9.5.20 Supplying , installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. 1 Set 56000
    a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  900 lpm at 45 Mtr head conforming to IS 1520
    b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55  class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens / ABB / Kirloskar
633 ELEC-9.5.21 Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. 1 Set 43500
    a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  900 lpm at 45 Mtr head conforming to IS 1520
    b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller and Gland Packing with 9.3 KW / 12.5HP, 2 pole, TEFC, 415 V, 3ph motor
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar
634 ELEC-9.5.22 Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. 1 Set 41500
    a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  750 lpm at 35 Mtr head conforming to IS 1520
    b) Three Phase High Speed Centrifugal  Pump. Pump with CI Impeller and Gland Packing with 7.5 KW / 10 HP, 2 pole, TEFC, 415 V, 3ph motor
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar
635 ELEC-9.5.23 Supplying , installation , testing and commissioning of electric driven Terrace / Mono Bloc Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. 1 Set 38200
    a) Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal  and flow of  450 lpm at 35 Mtr head conforming to IS 1520
    b) Three Phase High Speed Centrifugal  Pump. Pump with CI Impeller and Gland Packing with 5 KW / 7.5 HP, 2 pole, TEFC, 415 V, 3ph motor
    c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
    d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes : Kirloskar
    CONTROL PANELS    
  ELEC-9.5.24 Fabrication, supply,Transportation, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete  with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply.
Makes: L&T- D shine / Schneider-NS NSX/Legrand - DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 215000
    INCOMING :    
    250A, 50kA 4 Pole MCCB, Ics=100% Icu rating    
    Digital Voltmeter 0-500V with selector switch    
    Digital Ammeter (0-250 A) with selector swtich & CTs etc.  
    LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
    Set of Copper Bus Bar 300A    
    OUTGOING :    
    ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
    MAIN FIRE PUMP    
    125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation selector switch for local/remote, auto/manual/OFF operation.
    JOCKEY PUMP    
    63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for ocal/remote, auto/manual/OFF operation.
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Water Temp and Engine on indication. Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.
  ELEC-9.5.25 Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Makes: L&T- D shine / Schneider-NS NSX/Legrand - DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 253000
    INCOMING :    
    400A, 50kA 4 Pole MCCB, Ics=100% Icu rating    
    Digital Voltmeter 0-500V with selector switch    
    Ammeter (0-400 A) with selector swtich & CTs etc.    
    LED type RYB phase indicating lamps, ON, OFF, trip  
    indicating lamps    
    Set of Copper Bus Bar 500A    
    OUTGOING :    
    ( Note : All outgoing feeders for pumps should have    
    digital Ammeter with selector switches, and LED type  
    ON, OFF, trip indicating lamps)    
    MAIN FIRE PUMP    
    200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
    JOCKEY PUMP    
    100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller
  ELEC-9.5.26 Designing, Supply, Transportation,  Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
Makes: L&T- D shine / Schneider-NS NSX/Legrand - DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 280000
    INCOMING :    
    630A, 50kA 4 Pole MCCB, Ics=100% Icu rating    
    Digital Voltmeter 0-500V with selector switch    
    Ammeter (0-630 A) with selector swtich & CTs etc.    
    LED type RYB phase indicating lamps, ON, OFF, trip  
    indicating lamps    
    Set of Copper Bus Bar 800Amps    
    OUT GOING :    
    ( Note : All outgoing feeders for pumps should have    
    digital Ammeter with selector switches, and LED type  
    ON, OFF, trip indicating lamps)    
    MAIN FIRE PUMP    
    250 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
    JOCKEY PUMP    
    125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with over load protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.
  ELEC-9.5.27 Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Makes: L&T- D shine / Schneider-NS NSX/Legrand - DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 328000
    INCOMING :    
    400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating    
    Digital Voltmeter 0-500V with selector switch    
    Ammeter (0-400 A) with selector swtich & CTs etc.    
    LED type RYB phase indicating lamps, ON, OFF, trip  
    indicating lamps    
    Set of Copper Bus Bar 500Amps    
    OUT GOING :    
    ( Note : All outgoing feeders for pumps should have    
    digital Ammeter with selector switches, and LED type  
    ON, OFF, trip indicating lamps)    
    MAIN FIRE PUMPS    
    125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
- 2 sets
    JOCKEY PUMP    
    63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indi Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller
  ELEC-9.5.28 Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Makes: L&T- D shine / Schneider-NS NSX/Legrand - DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2 Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 392000
    INCOMING :    
    630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating    
    Digital Voltmeter 0-500V with selector switch    
    Ammeter (0-630 A) with selector swtich & CTs etc.    
    LED type RYB phase indicating lamps, ON, OFF, trip  
    indicating lamps    
    Set of Copper Bus Bar 800Amps    
    OUT GOING :    
    (Note : All outgoing feeders for pumps should have    
    digital Ammeter with selector switches, and LED type  
    ON, OFF, trip indicating lamps)    
    MAIN FIRE PUMP    
    200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
- 2 sets
    JOCKEY PUMP    
    100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.
  ELEC-9.5.29 Designing, Supply, Transportation, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Makes of MCCBs : L&T / Siemens / Legrand / Schneider / ABB / Hager
Makes of Meters :  Schneider (Conzerve) / L&T / Elmeasure / Siemens
1 No 500000
    INCOMING :    
    800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating    
    Digital Voltmeter 0-500V with selector switch    
    Ammeter (0-800 A) with selector swtich & CTs etc.    
    LED type RYB phase indicating lamps, ON, OFF, trip  
    indicating lamps    
    Set of Copper Bus Bar 1000Amps    
    OUT GOING :    
    ( Note : All outgoing feeders for pumps should have    
    digital Ammeter with selector switches, and LED type  
    ON, OFF, trip indicating lamps)    
    Main Fire Pump    
    250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
- 2 sets
    JOCKEY PUMP    
    125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
    DIESEL ENGINE CONTROL    
    Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller
    MS PIPES    
636 ELEC-9.5.30 Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes/Prakash Surya
    C-CLASS MS PIPES    
  a 250 mm dia 1 Mtr 3400
  b 200 mm dia 1 Mtr 2950
  c 150 mm dia 1 Mtr 2250
  d 100 mm dia 1 Mtr 1400
  e 80 mm dia 1 Mtr 930
  f 65 mm dia 1 Mtr 700
  g 50 mm dia 1 Mtr 560
  h 40 mm dia 1 Mtr 475
  i 32 mm dia 1 Mtr 375
  j 25 mm dia 1 Mtr 280
    B- CLASS MS PIPES    
  a 250 mm dia 1 Mtr 3000
  b 200 mm dia 1 Mtr 2600
  c 150 mm dia 1 Mtr 1800
  d 100 mm dia 1 Mtr 1200
  e 80 mm dia 1 Mtr 850
  f 65 mm dia 1 Mtr 630
  g 50 mm dia 1 Mtr 490
  h 40 mm dia 1 Mtr 370
  i 32 mm dia 1 Mtr 300
  j 25 mm dia 1 Mtr 250
637 ELEC-9.5.31 Supplying and fixing single headed Internal / External hydrant valve with instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required.
Makes: Newage/ Winco/ Padmini / Safex/Minimax/ Newtech/Honeywell
  a Single Headed Gun Metal 1 No 7300
  b Single Headed Stainless Steel 1 No 6500
638 ELEC-9.5.32 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze
/ Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU- G/Honeywell
  a (a) 250 mm . dia 1 No 11500
  b (b) 200 mm . dia 1 No 4900
  c (c) 150 mm   dia 1 No 4100
  d (d) 100 mm  dia 1 No 3150
  e (e)  80 mm   dia 1 No 2900
639 ELEC-9.5.33 Providing, installation, testing and commissioning of  dual Plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required
Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell
  a a) 250mm dia 1 No 18000
  b (b) 200 mm  dia 1 No 9200
  c (c) 150 mm  dia 1 No 6600
  d (d) 100 mm  dia 1 No 3500
  e (e)  80 mm   dia 1 No 3400
  f (f)  50 mm   dia 1 No 1800
640 ELEC-9.5.34 Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991  (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked  Rate at Ex-Factory
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU- G/Honeywell
  a 250 mm . dia 1 No 15300
  b 200 mm . dia 1 No 11000
  c 150 mm   dia 1 No 7000
  d 100 mm  dia 1 No 4700
  e 80 mm   dia 1 No 3500
  f (50 mm   dia 1 No 2800
641 ELEC-9.5.35 Providing, installation, testing and commissioning of gun metal valves of following sizes  as required.
Make: NEU-G/Zolotto/Padmini/SANT/Honeywell
  a 50 mm   dia 1 No 1600
  b 40 mm   dia 1 No 1300
  c 32 mm   dia 1 No 1175
642 ELEC-9.5.36 Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.
Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell
  a Gun metal 1 No 5630
  b SS couplings 1 No 4200
643 ELEC-9.5.37 Supplying and fixing 63mm dia, 15 mtr long CP hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.
Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell
  a Gun metal 1 No 4800
  b SS couplings 1 No 4000
644 ELEC-9.5.38 Supply, installation, testing and commissioning of stainless steel  Y – Stainer fabricated outof 1.6 mm thick SS 304 with following sizes confirming to IS specifications complete with rubber gasket, GI bolts , nuts, washers etc as required Makes:  Leader / Zolotto/SANT/Honeywell.
  a 250mm dia 1 No 18400
  b 200 mm . dia 1 No 17000
  c 150 mm   dia 1 No 8000
  d 100 mm  dia 1 No 4300
  e 80 mm   dia 1 No 3900
645 ELEC-9.5.39 Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. 1 No 6700
    a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585
Makes:  Reliance/ Newage/  Safex/NewTech/Winco/Minimax
    b) 20mm (Nominal internal) dia gun metal ball/gate valve and nozzle. Makes:NEU-G/SANT / Safex.
    c) Drum and brackets for fixing the equipments on wall.  
    d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
646 ELEC-9.5.40 Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. makes:Minimax/Safex/Newage/Winco/Padmini/NewTe ch 1 No 2900
647 ELEC-9.5.41 Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose  pipe coupling as required.
Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech
  a Gun metal 1 No 2200
  b SS couplings 1 No 1600
648 ELEC-9.5.42 Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos  Gun metal  Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell 1 No 8000
649 ELEC-9.5.43 Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos  Gun metal  Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell 1 No 6000
650 ELEC-9.5.44 Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 1 No 14300
651 ELEC-9.5.45 Providing fixing, testing and commissioning of 15mm size quartzoid bulb type sprinklers of rating 68º C. pendent / side wall with required accessories.
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX
1 No 440
652 ELEC-9.5.46 Supply  fixing, testing and commissioning of UL approved flexible dropper of 1.5 mtr length with required accessories
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP / SAFEX
1 No 1050
653 ELEC-9.5.47 Providing and fixing of Pressure Switch in the MS pipe Line including connection etc as required.
Makes : Danfoss / Indfoss  /Systemsensor/Honeywell
1 No 2250
654 ELEC-9.5.48 Providing and fixing Flow Switches  in 100mm dia  MS pipe.
Makes : System Sensor / Switzer /Honeywell
1 No 4800
655 ELEC-9.5.49 Providing and fixing Flow Switches  in 150 mm dia  MS pipe.
Makes : System Sensor / Switzer /Honeywell
1 No 6700
656 ELEC-9.5.50 Supply, installation, testing and commissioning of Bourden type, stainless steel  dial type pressure gauge with  isolation valve and pipe having calibration of 0-16 kg/cm2.
MAKES: HGURU / FIEBIG
1 No 600
657 ELEC-9.5.51 Supply, installation, testing and commissioning of 25mm dia Gate valve
Makes : Zoloto / Leader / SANT/NEU-G
1 No 1050
658 ELEC-9.5.52 Supply, installation, testing and commissioning of 25mm dia Ball valve
Makes : Zoloto / Leader / SANT/NEU-G
1 No 580
659 ELEC-9.5.53 Supply, installation, testing and commissioning of  25 / 20mm dia Air Release Valve Makes : Zoloto / Leader / SANT 1 No 1100
  ELEC-9.5.54 Supply, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required Makes : Tyko/Newage/HD
  a 750mm to 800 mm 1 No 900
  b 1000 mm to 1200 mm 1 No 1050
  c 1500 mm 1 No 1250
660 ELEC-9.5.55 Providing, fixing, testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
Makes : HD / TYCO / NEWAGE
  a 80mm dia 1 No 36000
  b 100mm dia 1 No 38000
  c 150mm dia 1 No 40000
661 ELEC-9.5.56 Supplying, installing, testing and commissioning of CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line.
Makes:Normex /SANT
  a a) 200mm nominal dia 1 Ea 22300
  b b) 150mm nominal dia 1 Ea 12000
  c c) 100mm nominal dia 1 Ea 6700
  d d)   80mm nominal dia 1 Ea 4600
  ELEC-9.5.57 Supply and laying of 300mm dia NP2 RCC Hume pipe with Collars for Road crossings -As per Civil SoR
662 ELEC-9.5.58 Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specificatios.
Make:IWL(PIPE KOT) or its equivalent
  A a) 200mm nominal dia 1 Mtr 400
  B b) 150mm nominal dia 1 Mtr 300
  C c) 100mm nominal dia 1 Mtr 270
  D d)   80mm nominal dia 1 Mtr 230
663 ELEC-9.5.59 Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting. 1 Kg 63
    SECTION 10    
  10.1 GENERATORS SPECIFICATION    
664 ELEC-10.1.1 Supply Installation Testing And commissioning of  DG Set complete with 1500 RPM Diesel Engine of suitableBHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.
Alternator: It shall be self regulated, self excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection( Over voltage, over speed & under voltage).
DieselEngine: Itshall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel and AVM. The diesel engine shall be capable of providing 10% over load for 1 Hr for every 11 Hrs of continuious running at full load.
Accoustic Enclosure: Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets.
    The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having  processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind.
Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms,complete in all respect of following capacity :
    Radiator Cooled and Turbocharged    
  a 15 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 340000
  b 30 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 440000
  c 40 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 548000
  d 62.5kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 630000
  e 125 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 825000
  (a to e) Engine Makes:Cummins/Koel Green/Sterling/ mahindra/Volvo-Eicher Alternator Make:Stamford/ Kirloskar/ CromptonGreaves /Leroysomer
  f 160 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1080000
  g DELETED 1 No  
  h 250 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1450000
  i 320 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2250000
  j 380 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2870000
  (f to j) Engine Makes:Caterpillar/Cummins/Koel Green
Alternator Make:Leroy somer/Crompton Greaves/Stamford
  k 500kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 3150000
  l 625 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 3800000
  m 750 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 4730000
  n 1000 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 5700000
  o 1250  kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 7700000
  p 1500 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 8740000
  (k to p) Engine Makes:Caterpillar/Perkins/Cummins
Alternator Make:Leroy somer/Crompton Greaves/Stamford
665 ELEC-10.1.2 Supply Installation Testing and Commissioning of   AUTO  MAINS  FAILURE (AMF) Panel with IP 52 protection, fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine  START & STOP commands,control RELAYS, selector switches for  Ammeter &  Voltmeter, Ammeter &  Voltmeter , Control & Power  Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for  faults, UPS, operator interface panel complete in all respect suitable  for following capacity DG sets:
    PLC based AMF Panel    
  a 25 to 40 KVA 1 No 75000
  b 50 to 63.5 KVA 1 No 110000
  c 80 to 160 KVA 1 No 155000
  d 180 to 250 KVA 1 No 210000
  e 320 to 500 KVA 1 No 260000
    Electro-Mechanical Relay Based  AMF Panel    
  f 25 to 63.5 KVA 1 No 55000
  f 80 to 180 KVA 1 No 92500
  g 200 to 500 KVA 1 No 135000
666 ELEC-10.1.3 Supply and fixing of Thermal Insulation With Asbestos Rope for Exhaust pipe Mtr 251
667 ELEC-10.1.4 Supply and fixing of Thermal Insulation With Rock/Glass Wool wwith Alluminium cladding (Density - 96 Kg/m3 thickness -50mm) for Exhaust pipe Mtr 1247
    SECTION 11    
  11.1 INVERTERS and ONLINE UPS SYSTEMS    
668 ELEC-11.1.1 Supply and installation of  ……. Inverter(home UPS system) pure sine wave out put, single phase input / Single phase output.
Makes:  Exide / Amar Raja / Samhitha/ Microtek
  a 800 VA, 12 V DC 1 No 8500
  b 1400 VA, 24 V DC 1No 12000
  c 2000 VA, 36 V DC 1No 17000
669 ELEC-11.1.2 Supply   installation Testing and commissioning of            KVA on line UPS system
confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with  IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output.
Makes: Numeric/APC/Consul Neowatt/Sakshham /Emerson
  a 2.0 KVA , 72/96VDC 1 No 24000
  b 3.0 KVA , 72/96 VDC 1 No 33000
  c 3.0 KVA , 72/96 VDC with Isolation Transformer 1 No 37800
  d 6.0 KVA , 192/240 VDC with Isolation Transformer 1 No 65000
  e 7.0 KVA , 192/240 VDC with Isolation Transformer 1 No 78500
  f 10.0 KVA , 192-240 VDC with Isolation Transformer 1 No 94500
670 ELEC-11.1.3 Supply   installation Testing and commissioning of            KVA on line UPS system
as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions
,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC,  PWM, pure sine wave out put, double conversion
,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three  phase output. Accoustic level shall be less than 58dB at 1 mtr distance.
Makes:  Numeric/APC/Consul Neowatt/Sakshham /Emerson
  a 10.0 KVA  312/360 V DC 1 No 165000
  b 15.0 KVA  312/360 V DC 1 No 180000
  c 20.0 KVA  312/360 V DC 1 No 210000
  d 30.0 KVA  312/360 V DC 1 No 275000
  e 40.0 KVA  312/360 V DC 1 No 350000
671 ELEC-11.1.4 Supply   installation Testing and commissioning of            KVA on line UPS system
as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions
,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC,  PWM, pure sine wave out put, double conversion
,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three  phase output. Accoustic level shall be less than 58dB at 1 mtr distance.
Makes:  Mitsubishi/ Socomec  /Schiender(APC)/ Legrand/Consul NeoWatt
  a 60 KVA 1 No 650000
  b 80.0 KVA 1 No 850000
  c 100.0 KVA 1 No 985000
  d 120.0 KVA 1 No 1118000
  e 160.0 KVA 1 No 1248000
  f 200.0 KVA 1 No 1274000
672 ELEC-11.1.5 Supply and providing of UPS cum battery rack up to 4 batteries 1 No 1500
673 ELEC-11.1.6 Supply and providing of battery rack for 5  to 10 batteries (42 AH) 1 No 3000
674 ELEC-11.1.7 Supply and providing of  battery rack upto 11 to 20 batteries (42 AH) 1 No 5000
675 ELEC-11.1.8 Supply and providing of  battery rack upto  20 to 30 batteries (65 & 100 AH) 1 No 9000
676 ELEC-11.1.9 Supply and fixing of 12V 26 AH SMF battery with 3 years Warrenty,  including wire leads ,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 3200
677 ELEC-11.1.10 Supply and fixing of 12V 42 AH SMF battery with 3 years Warrentyincluding wire leads ,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 5700
678 ELEC-11.1.11 Supply and fixing of 12V 65 AH SMF battery with 3 years warrenty including wire leads ,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 7200
679 ELEC-11.1.12 Supply and fixing of 12V 100 AH SMF battery with 3 years warrenty including wire leads,connections etc complete.,
Makes:  Quanta / Racket / Exide.
1 No 10440
680 ELEC-11.1.13 Supply and fixing of 12V 120/130 AH SMF battery with 3 years warrenty including wire leads,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 11160
681 ELEC-11.1.14 Supply and fixing of 12V, 150 AH SMF battery with 3 years warrentyincluding wire leads,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 15600
682 ELEC-11.1.15 Supply and fixing of 12V, 200 AH SMF battery with 3 years warrenty including wire leads ,connections etc complete.,
Makes: Quanta / Racket / Exide.
1 No 21600
683 ELEC-11.1.16 Supply and fixing of 12V, 120 AH MF battery including wire leads
Makes: Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic / Gotech.
1 No deleted
684 ELEC-11.1.17 Supply and fixing of 12V, 150 AH MF battery including wire leads
Makes: Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic / Gotech.
1 No 12000

*****