FINISHING



BASIC RATES (SH: 13.0 FINISHING)
Code
No.		 Description Unit Rate
0006 Hire charges of spraying machines including electric charges day 250.00
0101 Bhisti day 617.00
0112 Carpenter 2nd class day 679.00
0114 Beldar day 558.00
0117 Assistant Fitter or 2nd class Fitter day 558.00
0122 Mason (for plaster of paris work) 1st class day 738.00
0123 Mason (brick layer) 1st class day 738.00
0131 Painter day 679.00
0141 White Washer day 617.00
0155 Mason (average) day 709.00
0156 Carpenter (average) day 709.00
0324 Coal Tar litre 30.00
0367 Portland Cement (OPC-43 Grade) tonne 4940.00
0368 White Cement tonne 11200.00
0763 Glue kg 75.00
0771 Kerosene oil litre 50.00
0772 White cement based polymer modified self curing compound in
powder form		 kg 15.00
0775 Dehradun white lime quintal 600.00
0776 Satna lime quintal 370.00
0777 Dry hydrated lime (factory made) quintal 290.00
0801 Silicon and acrylic emulsion litre 130.00
0802 Acrylic distemper 1st quality , having VOC content less than
50 grams/ litre		 Kg 36.00
0803 Acrylic emulsion, having VOC content less than 50 grams/ litre litre 94.00
0820 Cement primer litre 80.00
0804 Premium acrylic emulsion of interior grade, having VOC contentless than 50 grams/ litre  Litre 220.00
0806 Ready mixed pink or grey primer on wood work (hard and soft wood)having VOC content less than 50 grams/ litre litre 105.00
0808 Water thinnable cement primer for interior wall surface, having VOCcontent less than 50 grams/ litre litre 50.00
0809 Exterior primer kg 140.00
0815 Dry distemper kg 30.00
0816 Ist quality Acrylic distemper(Ready mix) having VOC content less Than 50 grams/ litre kg 50.00
0818 Linseed oil (double boiled) l Litre 200.00
0821 Distemper primer l Litre 70.00
0823 Pink primer (for wood) litre 105.00
0824 White cement based putty kg  13.00
0826 Aluminium paint litre 150.00
0827 Acid proof paint (chocolate or black) litre 225.00
0828 Anticorrosive bituminous paint (black) litre 100.00
0829 Black Japan paint litre 90.00
0830 Enamel paint litre 165.00
0831 Floor enamel paint in all shades except green litre 250.00
0833 Synthetic enamel paint in black or chocolate shade litre 170.00
0834 Synthetic enamel paint in all shades except black or chocolate shade litre  
0835 Plastic acrylic emulsion paint litre 200.00
0836 100% Premium acrylic dirt resistance, Silicone additives exterior paint litre 270.00
0837 Acrylic Exterior Primer litre 100.00
0850 White lead kg 170.00
0851 Water proofing cement paint kg 38.00
0855 Wax polish (ready made) kg 230.00
0856 Ordinary varnish litre 100.00
0857 Superior copal varnish litre 115.00
0858 Superior spar varnish l Litre 115.00
0859 Oil type wood preservative litre 130.00
0868 Premixed super white gypsum plaster kg 6.00
0869 Plaster of Paris kg 5.000
0982 Coarse sand (zone III) cum 1350.00
0999 Shellac kg 300.00
1000 Spirit litre 48.00
1179 Crushed stone 2.36 mm to 12.5 mm size cum 900.00
1198 Second class kail wood in planks 10 cudm 260.00
1213 Water proofing materials kilogram 35.00
1216 Whiting quintal 600.00
1315 C.P. Brass chain with 40mm dia rubber plug each 40.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2209 Carriage of Cement tonne 92.24
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1150.00
4201 Aluminium primer litre 110.00
4202 Red oxide Zinc chromate primer litre  110.00
4203 Copper acetate kg 285.00
4204 Hydrochloric acid kg 33.00
4205 Copper chloride kg 270.00
4206 Copper nitrate kg 210.00
4207 Ammonium chloride kg 20.00
7239 Epoxy paint litre 230.00
7240 Fire retardant paint litre 260.00
7241 Melamine Polish 0 litre 280.00
7306 Aluminium T or L sections kg 190.00
8504 Multi surface paint litre 255.00
8505 Acrylic exterior paint litre 170.00
8506 Premium Acrylic exterior paint litre 180.00
8507 Textured exterior paint  Litre  240.00
85098508 Primer for cement paint litre 79.00
8509 Special Primer (C.W.) litre 140.00
8510 Metal Primer (U.G.) litre 90.00
8733 Synthetic ployster triangular fibre of length 6 mm, effectivediameter 10-40 microns and specific gravity of 1.34 to 1.40 kg 400.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00
13.0 FINISHING
13.1 12 mm cement plaster of mix :    
  13.1.1 1:4 (1 cement: 4 fine sand) sqm 266.85
  13.1.2 1:6 (1 cement: 6 fine sand) sqm 254.25
13.2 15 mm cement plaster on the rough side of single or half brick wall ofmix :    
  13.2.1 1:4 (1 cement: 4 fine sand) sqm 307.90
  13.2.2 1:6 (1 cement: 6 fine sand) sqm 292.85
13.3 20 mm cement plaster of mix :    
  13.3.1 1:4 (1 cement: 4 fine sand) sqm 365.25
  13.3.2 1:6 (1 cement: 6 fine sand) sqm 345.65
CEMENT PLASTER (IN COARSE SAND)
13.4 12 mm cement plaster of mix :    
  13.4.1 1:4 (1 cement: 4 coarse sand) sqm 276.15
  13.4.2 1:6 (1 cement: 6 coarse sand) sqm 263.55
13.5 1 15 mm cement plaster on rough side of single or half brick wall ofmix:    
  13.5.1 1:4 (1 cement: 4 coarse sand) sqm 318.95
  13.5.2 1:6 (1 cement: 6 coarse sand) sqm 303.90
13.6 20 mm cement plaster of mix :    
  13.6.1 1:4 (1 cement: 4 coarse sand) sqm 379.70
  13.6.2 1:6 (1 cement: 6 coarse sand) sqm 360.10
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT
13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :    
  13.7.1 1:3 (1 cement: 3 fine sand) sqm 340.85
  13.7.2 1:4 (1 cement: 4 fine sand) sqm 328.25
13.8 1 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :    
  13.8.1 1:3 (1 cement: 3 fine sand) sqm 384.35
  13.8.2 1:4 (1 cement: 4 fine sand) sqm 369.30
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floatingcoat of neat cement.    
  13.9.1 12 mm cement plaster sqm 350.15
  13.9.2 20 mm cement plaster sqm 460.70
13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. sqm 395.40
CEMENT PLASTER IN TWO COATS
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). sqm 399.30
13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. sqm 416.55
13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust). sqm 297.30
13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall. sqm 344.25
13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust). sqm 412.60
6MM CEMENT PLASTER
13.16 6 mm cement plaster of mix :    
  13.16.1 1:3 (1 cement : 3 fine sand) sqm 227.35
13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. sqm 301.65
13.18 Neat cement punning. sqm 62.75
ROUGH CAST PLASTER
13.19 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.    
13.19.1 Ordinary cement finish using ordinary cement sqm 681.10
PEBBLE DASH PLASTER
13.20 Pebble dash plaster upto 10 m height above ground level with  mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. sqm 638.95
13.21 Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers. 50kg cement
used in the mix 59.75		    
13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. sqm 65.95
13.23 Extra for plastering on circular work not exceeding 6 m in radius:    
  13.23.1 In one coat sqm 35.80
  13.23.2 In two coats sqm 54.45
13.24 Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:    
  13.24.1 In one coat sqm 532.75
  13.24.2 In two coats sqm 878.40
13.25 Extra for plastering:    
  13.25.1 Spherical ceiling sqm 133.60
  13.25.2 Groined ceiling sqm 144.75
  13.25.3 Flewing soffits sqm 88.35
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 196.70
  ARTIFICIAL STONE PLASTER    
 
13.27 Extra for lining out plaster to imitate stone or concrete blocks walling. sqm 85.25
PLAIN CEMENT MORTAR BANDS
13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand):    
  13.28.1 Flush Band cm per metre 5.70
  13.28.2 Sunk Band cm per metre 6.20 metre 7.10
  13.28.3 Raised Band cm per metre 12.15
  13.28.4 Moulded Band cm per    
13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand):    
  13.29.1 Flush Band cm per metre 6.90
  13.29.2 Sunk Band cm per metre 7.60
  13.29.3 Raised Band cm per cm per metre 8.70
  13.29.4 Moulded Band cm per cm per metre 16.25
13.30 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand). cm per metre 16.20
POINTING ON BRICK WORK
13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):    
  13.31.1 Flush / Ruled/ Struck or weathered pointing sqm 191.55
  13.31.2 Raised and cut pointing sqm 313.80
POINTING ON TILE BRICK WORK
13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):    
  13.32.1 Flush/ Ruled/ Struck or weathered pointing sqm 260.90
POINTING ON STONE WORK
13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :    
  13.33.1 Flush/ Ruled pointing sqm 285.40
  13.33.2 Raised and cut pointing sqm 520.75
13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1  white cement : 3 marble dust). sqm 538.25    
13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):    
  13.35.1 Flush/ Ruled pointing sqm 159.00
13.36 Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. sqm 7.15
POINTING ON STONE WORK
13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :    
  13.33.1 Flush/ Ruled pointing sqm 285.40
  13.33.2 Raised and cut pointing sqm 520.75
13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust). sqm 538.25
13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):    
13.35.1 Flush/ Ruled pointing sqm 159.00
13.36 Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. sqm 7.15
INTERIOR FINISHING
13.37 White washing with lime to give an even shade :    
  13.37.1 New work (three or more coats) sqm 28.55
13.38 Satna lime wash on walls with one coat. sqm 11.50
13.39 Colour washing such as green, blue or buff to give an even shade :    
  13.39.1 New work (two or more coats) with a base coat of white washing with lime sqm 38.95
  13.39.2 New work (two or more coats) with a base coat of whiting sqm 38.50
13.40 Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. sqm 117.75
13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :    
  13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer sqm 153.45
13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.    
  13.42.1 Two or more coats on new work sqm 87.15
13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :    
  13.43.1 Water thinnable cement primer sqm 60.00
EXTERIOR FINISHING
13.44 Finishing walls with water proofing cement paint of required shade :    
  13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 91.25
13.45 Finishing walls with textured exterior paint of required shade :    
  13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm sqm 232.00
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :    
  13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 164.70
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:    
  13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 161.15
13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :    
  13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm sqm 142.20
  13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture sqm 130.25
  13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture sqm 125.80
13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.    
  13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. sqm 146.20
13.50 Applying priming coat:    
  13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 57.05
  13.50.2 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood sqm 57.55
  13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/
steel works		 sqm 50.70
  13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) sqm 27.20
13.51 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :    
  13.51.1 One coat sqm 81.20
  13.51.2 Two coats sqm 129.05
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.    
  13.52.1 On steel work sqm 189.75
  13.52.2 On concrete work sqm 189.40
13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :    
  13.53.1 New work (two or more coats) including a coat of approvedsteel primer but excluding a coat of mordant solution sqm 138.00
13.54 Applying a coat of mordant solution on G.S. sheet:    
  13.54.1 With a solution of 38 gms of copper acetate in a litre of
soft water		 sqm 48.25
  13.54.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water sqm 48.05
13.55 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work:		    
  13.55.1 100 mm diameter pipes metre 58.15
  13.55.2 150 mm diameter pipes metre 86.70
13.56 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work.    
  13.56.1 100 mm diameter pipes metre 63.70
  13.56.2 150 mm diameter pipes metre 94.85
13.57 Painting with oil type wood preservative of approved brand an  manufacture :    
  13.57.1 New work (two or more coats) sqm 44.50
13.58 Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. sqm 292.00
13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively. sqm 50.30
13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :    
  13.60.1 Two or more coats on new work sqm 128.65
13.61 Painting with synthetic enamel paint of approved brand an manufacture to give an even shade :    
  13.61.1 Two or more coats on new work sqm 121.55
13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :    
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 177.15
13.63 Painting with aluminium paint of approved brand and manufacture to give an even shade .    
  13.63.1 Two or more coats on new work sqm 112.25
13.64 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :    
  13.64.1 Two or more coats on new work sqm 130.5
13.65 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :    
  13.65.1 Two or more coats on new work sqm 106.05
13.66 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :    
  13.66.1 Two or more coats on new work sqm 144.65
13.67 Varnishing with varnish of approved brand and manufacture :    
  13.67.1Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish sqm 182.40
  13.67.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish sqm 183.25
13.68 French spirit polishing :    
  13.68.1 Two or more coats on new works including a coat of wood filler sqm 351.15
13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture :    
  13.69.1 New work sqm 150.90
13.70 0Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. sqm 72.85
13.71 Lettering with black Japan paint of approved brand and manufacture per letter per cm height 4.70
13.72 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). sqm 896.75
13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :    
  13.73.1 15 mm wide and 15 mm deep groove metre 57.15
  13.73.2 20 mm wide and 15 mm deep groove metre 57.75
13.74 Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. sqm 129.65
13.75 Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats). sqm 101.10
13.76 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge. metre 86.75
13.77 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. sqm 83.75
13.78 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. sqm 342.85
13.79 Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic per bag of Polyester triangular fibre for 50 Kgs. cement used in cement mortar 50kg of as per directions of Engineer-in-Charge. cement 66.90
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 115.15
13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.    
  13.81.1 One coat sqm 50.60
  13.81.2 Two coats sqm 81.90
13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.    
  13.82.1 One coat sqm 71.80
  13.82.2 Two coats sqm 106.80
13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.    
  13.83.1 One coat sqm 75.10    
  13.83.2 Two coats sqm 113.90    
13.84 DELETED    
  13.84.1 DELETED    
  13.84.2 DELETED    
13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.    
  13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre sqm 57.05
  13.85.2 DELETED    
  13.85.3 With water thinnable cement primer on wall surfacehaving VOC content less than 50 grams/litre sqm 60.00    
13.86 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. sqm 205.50
13.87 White washing with lime to give an even shade :    
  13.87.1 Old work (two or more coats) sqm 16.75
  13.87.2 Old work (one or more coats) sqm 10.25
13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches
etc. complete		 sqm 14.20
13.89 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. sqm 49.55
13.90 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :    
  13.90.1 Old work (one or more coats) sqm 54.30
13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm 18.25
13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :    
  13.92.1 Old work (one or more coats) sqm 71.05
13.93 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work :    
  13.93.1 75 mm diameter pipes metre 43.60    
13.94 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :    
  13.94.1 75 mm diameter pipes metre 20.55
  13.94.2 100 mm diameter pipes metre 27.15
  13.94.3 150 mm diameter pipes metre 39.10
13.95 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work :    
  13.95.1 75 mm diameter pipes metre 45.15
  13.95.2 100 mm diameter pipes metre 62.65
  13.95.3 150 mm diameter pipes metre 93.35
13.96 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :    
  13.96.1 75 mm diameter pipes metre 21.75
  13.96.2 100 mm diameter pipes metre 27.95
  13.96.3 150 mm diameter pipes metre 40.20
13.97 Painting with oil type wood preservative of approved brand and manufacture    
  13.97.1 Old work (one or more coats) sqm 33.90
13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:    
  13.98.1 One or more coats on old work sqm 84.65
13.99 Painting with synthetic enamel paint of approved brand and  manufacture of required colour to give an even shade :    
  13.99.1 One or more coats on old work sqm 79.95
13.100 Painting with aluminium paint of approved brand and manufacture to give an even shade:    
  13.100.1 One or more coats on old work sqm 73.25
13.102 Painting with black anti-corrosive bitumastic paint of approved brand  and manufacture to give an even shade :    
  13.102.1 One or more coats on old work sqm 70.95
13.103 French spirit polishing :    
  13.103.1 One or more coats on old work sqm 176.85
13.104 Polishing on wood work with ready made wax polish of approved brand and manufacture :    
  13.104.1 Old work sqm 76.30
13.105 Re-lettering with black Japan paint of approved brand and manufacture. per letter per cm
height		 3.00
13.106 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. sqm 72.45
13.107 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin:    
  13.107.1 32 mm dia each 75.10
  13.107.2 40 mm dia each 75.10
13.108 Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification.    
  13.108.1 One or more coats on old work sqm 48.05
13.109 Finishing walls with water proofing cement paint of required shade :    
  13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. sqm 87.20
  13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 59.35
13.110 Finishing walls with textured exterior paint of required shade :    
  13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. sqm 168.75
  13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm 105.30
13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :    
  13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface sqm 99.90
  13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 67.35
13.112 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade    
  13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface sqm 97.75
  13.112.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 66.95
13.113 Varnishing with varnish of approved brand and manufacture: sqm 73.40
  13.113.1 One or more coats with copal varnish sqm 73.40
  13.113.2 One or more coats with spar varnish sqm 73.85
13.114 13.114 Melamine polishing on wood work (one or more coat). sqm 110.75
13.115 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. sqm

76.65

Note: Item no 13.87 to 13.115 are brought from Sub Head 14 i.e. Repairs to Building Item no 14.42 to 14.71

*****