FLOORING



BASIC RATES (SH: 11.0 FLOORING)
Code Description unit Rate
No.      
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00
0013 Machine for rubbing of floors day 300.00
0100 Bandhani day 617.00
0101 Bhisti day 617.00
0103 Blacksmith 2nd class day 679.00
0111 Carpenter 1st class day 738.00
0114 Beldar day 558.00
0115 Coolie day 558.00
0123 Mason (brick layer) 1st class day 738.00
0124 Mason (brick layer) 2nd class day 679.00
0126 Mason (for ornamental stone work) 1st class day 738.00
0127 Driver for (Road roller, concrete mixer, Trucks etc.) day 738.00
0130 Mistry day 738.00
0139 Skilled Beldar (for floor rubbing etc.) day 617.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1350.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0298 Stone Aggregate (Single size) : 06 mm nominal size cum 1400.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 34000.00
0367 Portland Cement (OPC-43 Grade) tonne 4940.00
0368 White Cement tonne 11200.00
0682 Oxidised mild steel screws 50 mm 100 Nos 76.00
0784 Marble dust/ powder cum 1130.00
0785 Marble chips up to 4 mm and down size White & black quintal 189.00
0788 Marble chips large size above 4 mm White & black quintal 250.00
0874 Black colour dark shade pigment kg 70.00
0875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment kg 60.00
0876 Green or blue medium shade pigment kg 56.00
0982 Coarse sand (zone III) cum 1350.00
0983 Fine sand (zone IV) cum 900.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4600.00
1008 Flats up to 10 mm in thickness quintal 4500.00
1149 Glass strip 4 mm thick 40 mm deep metre 20.00
1164 Red sand stone slab 40 mm thick (un-dressed) sqm 200.00
1165 White sand stone slab 40 mm thick (un-dressed) sqm 200.00
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm 280.00
1187 First class teak wood in scantling 10 cudm 880.00
1190 Second class teak wood in planks 10 cudm 791.00
1194 Second class deodar wood in planks 10 cudm 500.00
1201 Precast terrazzo tiles 22 mm thick (light shade) sqm 285.00
1202 Precast terrazzo tiles 22 mm thick (medium shade) sqm 265.00
1203 Precast terrazzo tiles 22 mm thick (dark shade) sqm 245.00
1215 Welding by electric plant cm 2.00
1227 Chequered terrazzo tiles 22 mm thick (light shade) sqm 275.00
1228 Chequered terrazzo tiles 22 mm thick (medium shade) sqm 300.00
1229 Chequered terrazzo tiles 22 mm thick (dark shade) sqm 260.00
1231 Extra for selected planks of second class teakwood 10 cudm 150.00
1240 18 mm thick Italian Marble stone slab, Perlato (slab area up to
0.5 sqm).
sqm 3209.00
1241 Commercial LPG in cylinder kg 82.00
1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm) sqm 2049.00
1243 Tile fixing chemical adhesive kg 8.70
1244 Cement Polymer Grout Compound kg 16.00
1245 Acid for cleaning tiles litre 18.00
2201 Carriage of Bricks 1000 Nos 276.72
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2204 Carriage of Timber cum 118.59
2205 Carriage of Steel tonne 92.24
2209 Carriage of Cement tonne 92.24
2211 Carriage of Tar / Bitumen tonne 103.77
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 92.24
2261 Carriage of Fine sand cum 103.77
2268 Carriage of Marble dust and/or marble chips cum 103.77
2500 Extra for selected planks of second class deodar wood 10 cudm 110.00
2602 Common burnt clay F.P.S. (non modular) bricks class designation 1000 Nos 4500.00
2708 Truf Paver (500 x 500 x 40 mm) sqm 500.00
2709 Ceremic Tiles Pieces for Crazy Flooring quintal 135.00
2710 White marble makrana second quality plain veined stone pieces for crazy flooring quintal 150.00
2711 FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm) each 750.00
2712 Zinc Electroplated Pedestals - 300 mm each 140.00
2713 Zinc Electroplated Pedestals - 450 mm each 200.00
2714 Zinc Electroplated Tube Stinger each 66.00
2715 Machine Screw for Fixing each 2.00
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 700.00
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 400.00
6001 White marble slab Makrana second quality plain veined 18 mm thick sqm 1430.00
6007 Pink marble slab plain 18 mm thick sqm 645.00
6010 Udaypur green marble slab plain 18 mm thick sqm 620.00
6019 Black Zebra marble slab plain 18 mm thick sqm 900.00
7024 Acid Proof cement tonne 7800.00
7048 Rawl plug 50 mm (designation 10 nos) each 25.00
7070 Chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm - Light shade using white cement sqm 400.00
7071 White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area sqm 600.00
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 520.00
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement sqm 225.00
7237 Precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement sqm 335.00
7254 Hardening compound litre 38.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 11.00
7800 Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black sqm 212.00
7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. sqm 209.10
7802 Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs except White, Ivory, Grey, Fume Red Brown etc. sqm 260.00
7803 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc. sqm 340.00
7804 Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc. sqm 400.00
7850 Agaria White marble slab plain 18 mm thick sqm 1100.00
8620 Vitrified floor tile 50x50 cm conforming to IS 15622:2006 group (B1a) sqm 490.00
8621 Vitrified floor tile 60x60 cm conforming to IS 15622:2006 group (B1a) sqm 659.72
8622 Vitrified floor tile 80x80 cm conforming to IS 15622:2006 group (B1a) sqm 850.00
8623 Vitrified floor tile 100x100 cm  conforming to IS 15622:2006 group (B1a) sqm 1390.00
8624 "Border tiles 200x75mm size each 16.00
8682 Epoxy Grout kg 371.00
8731 High polymer modified quickset tile adhesive kg 9.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00

 

BASIC RATES (SH: 12.0 FLOORING)
Code No Description Unit Rate
11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:    
  11.1.1 1:4 (1 cement : 4 coarse sand) sqm 867.45
  11.1.2 1:6 (1cement : 6 coarse sand) sqm 829.45
11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. sqm 680.85
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.    
  11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 498.35
11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete sqm 787.5
11.5 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete sqm 854.3
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.    
  11.6.1 18 mm thick sqm 521.15
11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. sqm 7335.1
11.8 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc sqm 63.2
TERRAZO FLOORING
11.9 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete :    
  11.9.1 Dark shade pigment with ordinary cement sqm 847
  11.9.2 Light shade pigment with white cement sqm 877.1
  11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement sqm 858.7
  11.9.4 White cement without any pigment sqm 855.6
  11.9.5 Light shade pigment with ordinary cement sqm 843.2
  11.9.6 Ordinary cement without any pigment sqm 818.45
11.1 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete    
  11.10.1 Dark shade pigment with Ordinary cement sqm 876.9
  11.10.2 Light shade pigment with white cement sqm 919.9
  11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement sqm 893.5
  11.10.4 White cement without any pigment sqm 893.1
  11.10.5 Light shade pigment with ordinary cement sqm 873.1
  11.10.6 Ordinary cement without any pigment sqm 837.5
11.11 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume, including cement slurry etc. complete :    
  11.11.1 Dark shade pigment with ordinary cement sqm 909.85
  11.11.2 Light shade pigment with white cement sqm 970.1
  11.11.3 Medium shade pigment with 50% white cement and 50% ordinary cement sqm 933.15
  11.11.4 White cement without any pigment sqm 923.4
  11.11.5 Light shade pigment with ordinary cement sqm 902.25
  11.11.6 Ordinary cement without any pigment sqm 855.55
11.12 Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :    
  11.12.1 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :    
  11.12.1.1 Dark shade pigment with ordinary cement sqm 1398.2
  11.12.1.2 Light shade pigment with white cement sqm 1428.3
  11.12.1.3 Medium shade pigment with 50% white cement and 50% ordinary cement sqm 1409.9
  11.12.1.4 White cement without any pigment sqm 1406.8
  11.12.1.5 Light shade pigment with ordinary cement sqm 1394.4
  11.12.1.6 Ordinary cement without any pigment sqm 1370.7
11.13 Providing and fixing glass strips in joints of terrazo/ cement concrete floors.    
  11.13.1 40 mm wide and 4 mm thick sqm 75.15
11.14 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width, including cost of forming, nosing etc. sqm 72.05
11.15 Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete :    
  11.15.1 18 mm thick crazy marble stone white, black or as specified sqm 1329.3
TILE FLOORING
11.16 Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :    
  11.16.1 Light shade pigment using white cement sqm 1238.6
  11.16.2 Medium shade pigment using 50% white cement and 50% ordinary cement sqm 1189.1
  11.16.3 Dark shade pigment using ordinary cement sqm 1147
  11.16.4 Ordinary cement without any pigment sqm 1091.6
11.17 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. sqm 90.05
11.18 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :    
  11.18.1 Light shade pigment using white cement sqm 1865.4
  11.18.2 Medium shades pigment using 50% white cement and 50% ordinary cement sqm 1805.9
  11.18.3 Dark shade pigment using ordinary cement sqm 1757.5
  11.18.4 Ordinary cement without any pigment sqm 1687.6
11.19 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :    
  11.19.1 Light shade pigment using white cement sqm 1223.9
  11.19.2 Medium shade pigment using 50% white cement, 50% ordinary cement sqm 1240.6
  11.19.3 Dark shade pigment using ordinary cement sqm 1169.1
  11.19.4 Ordinary cement without any pigment sqm 1113.8
11.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).    
  11.20.1 Light shade pigment using white cement sqm 1221.7
  11.20.2 Medium shade pigment using 50% white cement 50% Grey cement sqm 1104.3
  11.20.3 Dark shade pigment using ordinary cement sqm 928
  11.20.4 Ordinary cement without any pigment sqm 872.55
11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.    
  11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)    
  11.21.1.1 Acid and alkali resistant tile sqm 1495
  11.21.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)    
  11.21.2.1 Acid and alkali resistant tile sqm 1607.7
11.22 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.    
  11.22.1 Marble tiles (polished) Raj Nagar    
  11.22.1.1 8 mm thick sqm 1239.6
STONE FLOORING
11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :    
  11.23.1 Makrana white second quality sqm 3237.8
  11.23.2 Raj Nagar plain sqm 1960.8
  11.23.3 Agaria White sqm 2730.1
  11.23.4 Black Zebra sqm 2422.3
  11.23.5 Udaipur green marble sqm 1991.5
  11.23.6 Pink plain marble sqm 2030
11.24 Extra for pre finished nosing to treads of steps of marble stone metre 530.25
11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre sqm 622.75
KOTA STONE FLOORING
11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :    
  11.26.1 25 mm thick sqm 1531.9
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete sqm 1810.1
SAND STONE FLOORING
11.28 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.    
  11.28.1 Red sand stone sqm 888.95
  11.28.2 White sand stone sqm 888.95
11.29 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.    
  11.29.1 Red sand stone sqm 1074.6
  11.29.2 White sand stone sqm 1074.6
11.3 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.    
  11.30.1 Red sand stone sqm 1165.2
  11.30.2 White sand stone sqm 1165.2
11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab metre 148.1
11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre sqm 33.1
WOODEN FLOORING
11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :    
  11.33.1 Second class teak wood sqm 4152.5
  11.33.2 Second class deodar wood sqm 2759.1
11.34 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete sqm 9971.2
11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. kg 132.25
CERAMIC GLAZED TILES
11.36 Item Shifted to Sub Head 8 as item 8.31    
11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete sqm 926.9
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 927.9
11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. sqm 996.7
11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete sqm 1088.4
11.4 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. sqm 1170.7
VITRIFIED FLOOR TILES
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.    
  11.41.1 Size of Tile 500x500 mm sqm 1267.8
  11.41.2 Size of Tile 600x600 mm sqm 1500.6
  11.41.3 Size of Tile 800x800 mm sqm 1758.7
  11.41.4 Size of Tile 1000x1000 mm sqm 2499.3
11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm sqm 677.55
11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness sqm 587.2
11.44 Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge sqm 735.65
11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. sqm 1511.9
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.    
  11.46.1 Size of Tile 500x500 mm sqm 1313.1
  11.46.2 Size of Tile 600x600 mm sqm 1545.9
  11.46.3 Size of Tile 800x800 mm sqm 1806.8
  11.46.4 Size of Tile 1000x1000 mm sqm 2547.4
11.46A Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge metre 164.65
11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).    
  11.47.1 Size of Tile 500x500 mm sqm 1501.3
  11.47.2 Size of Tile 600x600 mm sqm 1734
  11.47.3 Size of Tile 800x800 mm sqm 1995
  11.47.4 Size of Tile 1000x1000 mm sqm 2735.5
11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.    
  11.48.1 Size of Tile 500x500 mm sqm 291
  11.48.2 Size of Tile 600x600 mm sqm 241.45
  11.48.3 Size of Tile 800x800 mm sqm 191.85
  11.48.4 Size of Tile 1000x1000 mm sqm 137.35
11.49 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)    
  11.49.1 Size of Tile 500x500 mm sqm 1377.2
  11.49.2 Size of Tile 600x600 mm sqm 1610
  11.49.3 Size of Tile 800x800 mm sqm 1870.9
  11.49.4 Size of Tile 1000x1000 mm sqm 2611.5
11.5 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. sqm 11
11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.    
  11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 5986.2
11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.    
  11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc sqm 6276.1
11.53 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: sqm 3250.4
11.54 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:    
  (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.    
  (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.    
  (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.    
  11.54.1 300 mm Finished Floor Height (FFH) sqm 5075.3
  11.54.2 450 mm Finished Floor Height (FFH). sqm 5364.3
11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :    
  11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 2476.5
11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge    
  11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite  Cat Eye or equivalent sqm 3526.6
  Note: Item no 11.55 & 11.56 are brought from Sub Head 8 i.e. Cladding Work Item no 8.12 & 8.13    

*****