GREEN BUILDING(2019-20)



SSR 2019-20 GREEN BUILDING
Sr. No. Chapter SSR Item No. Reference No. Description of the item Additional Specification Unit Completed Rate
excluding GST In Rs.
Labour Rate
excluding GST In Rs.
1585 Masonary 48.01   Providing   and   constructing   non   load   bearing   wall   with   200mm Horizontally  perforated  clay  hollow  blocks  of  approved  make  with compressive  strength  not  less  than  35  kg/Sqcm,  U  value  of  47.0 W/m2K,  Water  Absorption  of  15%,  masonry  to  be  done  using  fine aggregate  (natural  sand/crushed  sand  VSI  grade  finely  washed  etc.) cement  mortar  1:6  with  blocks  of  size  400mm  x  200mm  x  200mm (12.5 bricks per Sqm. excluding mortar joint thickness) including cost of   materials,   labour   charges,   scaffolding,   curing   at   all   heights, complete  as  per  specifications  &  directions  of  Engineer-in  Charge. Cost  shall  be  inclusive  of  filling  the  Blocks  with  Cement  mortar  at exposed  junctions  and  filling  with  concrete  using  12mm  down  size aggregates at Window and door Jambs for fixing hold fast, anchors etc. As directed by Engineer in charge Square Metre 1820 466
1586 Masonary 48.02   Providing   and   constructing   non   load   bearing   wall   with   150mm Horizontally  perforated  clay  hollow  blocks  of  approved  make  with compressive   strength  not  less   than  35Kg/Sqcm,  U   value  of  47.0 W/m2k,  Water  Absorption  of  15%,  with  cement  mortar  1:6  with blocks  of  size  400mm  x  150mm  x  200mm  (12.5  bricks  per  Sq.m excluding  mortar  joint  thickness)  including  cost  of  materials,  labour charges,    scaffolding,    curing    at    all    heights,    complete    as    per specifications   &   directions   of   Engineer-in   Charge.   Cost   shall   be inclusive of filling the Blocks with Cement mortar at exposed junctions and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast, anchors etc. As directed by Engineer in charge Square Metre 1530 426
1587 Masonary 48.03   Providing   and   constructing   non   load   bearing   wall   with   100mm Horizontally  perforated  clay  hollow  blocks  of  approved  make  with compressive  strength  not  less  than  35Kg/Sq.cm,  U  value  of  47.0 W/m2k,  Water  Absorption  of  15%,  with  cement  mortar  1:6  with blocks  of  size  400mm  x  100mm  x  200mm  (12.5  bricks  per  Sqm. excluding mortar joint thickness) At every  5th  course level,  Concrete band  of  100mm  thick  with  1:3:6  Mix  Concrete  along  with  Nominal Reinforcement to be provided. The rate inclusive of cost of materials, labour  charges,  scaffolding,  curing  at  all  height,  complete  as  per specifications   &   directions   of   Engineer-in   Charge.   Cost   shall   be inclusive of filling the Blocks with Cement mortar at exposed junctions and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast, anchors etc. As directed by Engineer in charge Square Metre 1331 386
1588 Flooring 48.04   Providing  and  laying  18  mm  thick  ADONI  BROWN  LEATHER  FINISH stone for flooring, machine cut in required size, approved shade, color and texture laid using white cement slurry over 20 mm (average) thick base of cement mortar 1:4 followed by laying, fixing and jointed with white cement slurry mixed with matching pigment, including rubbing and curing moulding and polishing to edge to give high gloss finish etc complete.  The  application  rate  for  tile  adhesives  shall  be  as  per manufacturer's  recommendations.  as  per  detail  drawing.  The  rate shall   be   inclusive   of   all   labour,   material,   wastage,   scaffolding, transportation,  taxes,  including  all  leads,  lifts  at  all  levels  and  as directed by Engineer in charge. Complete.
a) Flooring
As directed by Engineer in charge Square Metre 3599 150
1589 Flooring 48.05   Providing  and  laying  18  mm  thick  ADONI  BROWN  LEATHER  FINISH stone for flooring, machine cut in required size, approved shade, color and texture laid using white cement slurry over 20 mm (average) thick base of cement mortar 1:4 followed by laying, fixing and jointed with white cement slurry mixed with matching pigment, including rubbing and curing moulding and polishing to edge to give high gloss finish etc complete.  The  application  rate  for  tile  adhesives  shall  be  as  per manufacturer's  recommendations.  as  per  detail  drawing.  The  rate shall   be   inclusive   of   all   labour,   material,   wastage,   scaffolding, transportation,  taxes,  including  all  leads,  lifts  at  all  levels  and  as directed by Engineer in charge.
Complete.
a) Skirting
As directed by Engineer in charge Square Metre 4536 909
1590 Flooring 48.06   Providing and Laying factory made coloured chamfered edge Cement concrete   grass   paver   blocks   of   required   strength,thickness   & size/shape,  made  by  table  vibratory  method  using  PU  mould,  laid  in required colour & pattern over 50mm thick compacted bed of fine fine aggregate  (natural  sand/crushed  sand  VSI  grade  finely  washed  etc.), compacting and proper embedding/laying of inter locking paver blocks into  the  fine  aggregate  (natural  sand/crushed  sand  VSI  grade  finely washed  etc.)  bedding  layer  through  vibratory  compaction  by  using plate    vibrator,    filling    the    joints    with    fine    aggregate    (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine  aggregate  (natural  sand/crushed  sand  VSI  grade  finely  washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge.   60mm   thick   CC   paver   block   of   M-35   grade concrete with approved colour and design & pattern. As directed by Engineer in charge Square Metre 742 0
1591 Flooring 48.07   Bamboowood 14 mm thick tile flooring including quater round, door reduces  and  plywood-Providing  &  fixing  in  position  Phenol  bonded Epitome  Bamboowood  flooring  with  planks  of  sizes  14mm  thick, 1800mm length (minimum) and 130mm wide (minimum), in approved colour,  texture  and  finish,  having  Performance  Appraisal  Certificate (PAC)  issued  by  Building  Materials  &  Technology  Promotion  Council (MBTPC).   The   flooring   shall   be   fixed   with   tongue   and   groove interlocaking system, with plywood of mr grade of 18mm thickness as base  and  underlayment  of  4mm  thick  expanded  poly  ethylene  foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer of size 1900mm  x  44mm,  wherever  required.  The  Epitome  Bamboowood planks  shall  have  minimum  density  of  1000  kg/cum  &  minimum Hardness 1000 Kgf. with Eco friendly UV coating, all  complete as  per direction of Engineer in-charge. As directed by Engineer in charge Square Metre 7293 190
1592 Flooring 48.08   Bamboowood  14mm  thick  Tile  Flooring  including  quarter  round  & door reducer - Providing & fixing in position Phenol bonded Epitome Bamboowood  flooring  with  planks  of  sizes  14mm  thick,  1800mm length  (minimum)  and  130mm  wide  (minimum),  in  approved  colour, texture  and  finish,  having  Performance  Appraisal  Certificate  (PAC) issued   by   Building   materials   &   Technology   Promotion   Council (BMTPC).   The   flooring   shall   be   fixed   with   tongue   and   groove interlocaking  system,  with  2mm  underlay  as  sound  abrobing  and moisture  barrier  and  underlayment  of  4mm  thick  expanded  poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer  of  size  1900mm  x  44mm,  wherever  required.  The  Epitome Bamboowood  planks  shall  have  minimum  density  of  1000 kg/cum  & minimum   Hardness   1000   Kgf.   with   Eco   friendly   UV   coating,   all complete as per direction of Engineer in-charge As directed by Engineer in charge Square Metre 5805 190
1593 Flooring 48.09   Bamboowood 14mm thick wall Skirting - Providing & fixing in position Phenol bonded Epitome Bamboowood in wall skirting with planks of sizes   14mm  thick,   1900mm  length  (minimum)   and  85mm   wide (minimum),    in    approved    colour,    texture    and    finish,    having Performance Appraisal Certificate (PAC) issued by Building materials & Technology Promotion Council (BMTPC). The skirting shall be fixed SS screws & rawl plugs, over underlayment of 4mm thick expanded poly ethylene   foam   sheets   having   density   40kg/cum,   over   prepared surface.   The   Epitome   Bamboowood   planks   shall   have   minimum density 1000 kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge As directed by Engineer in charge Square Metre 6124 843
1594 Flooring 48.10   Bamboowood 20mm thick Decking Outdoor Flooring Tile Providing & fixing in position Phenol bonded Epitome Bamboowood deck flooring tiles  with  planks  of  sizes  20mm  thick,  1900  mm  length  and  135mm wide  ,in  approved  colour  ,  texture  and  finish  ,  having  performance Appraisal  Certificate  (PAC)  issued  by  Building  Materials&  Technology promotion Council (BMTPC)with necessary profiled edges and groove fixed with 40mm ss screws 3 nos in each tile to frame work made of second  class  seasoned  and  treated  teak  wood  of  size  38x38  mm placed underneath acoss the tile at both ends and in centre fixed with clips holding in position. The Epitome Bamboowood planks shall have minimum  density  of  1000  kg/cum  &  minimum  hardness  1000  kgf.all complete as per direction of engineer in-charge. As directed by Engineer in charge Square Metre 10490 299
1595 Colouring 48.11   Providing  and  applying  2  coats  of  100%  Pure  acrylic  low  VOC  and APEO  &  HCHO  free  water  based  paint  of  approved  colour  that belongs  to  class  1  flame  spread  resistance  of  approved   make  Paint should  provide  durable  and  long  lasting  silk  finish  with  a  high  crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be  applied  on  smooth  and  uniform  surface  prepared  by  an  acrylic copolymer  low  VOC  &  Odour  putty.  This  surface  should  be  primed with water based low VOC Primer. The work activity should cover all aspects  of  applying  paints  from  surface  preparation  as  directed  by Engineer in charge. As directed by Engineer in charge Square Metre 291 0
1596 Colouring 48.12   Providing  and  applying  2  Coats  of  100%  Pure  acrylic  water  based paint  with  special  heat  reflectance  property  to  withstand the  harsh climate for period of atleast 10 years of approved  make. Paint system should  provide  durable  and  long  lasting  finish  with  DFT  of  min  90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalent concrete layer thickness value of min 150 cm. Paint should have breathability property and should be able to cover hairline cracks in the surface upto 0.5mm The paint has to be applied  on  a  coat  of  high  quality  acrylic  copolymer  based  alkali resistant   primer   with   excellent   penetrating   properties   including cleaning, with all leads and lifts at all levels etc complete, as directed by Engineer in charge. As directed by Engineer in charge Square Metre 209 0
1597 Colouring 48.13   Providing and applying 2 Coats of high quality acrylic copolymer matt latex  low  VOC  emulsion  paint  of  approved  shadethat  gives  smooth, flat  and  washable  and  durable  finishing  of  approved   make.  Paint should have good flow levelling property  with good colour  retention and  incan  antibacterial  property.  Paint  has  to  be  applied  on  smooth and  uniform  surface  prepared  by  an  acrylic  copolymer  low  VOC  & Odour putty. This surface should be primed with water based low VOC acrylic  copolymer  based  primer  sealer  that  has  incan  antibacterial property. The work activity should cover all aspects of applying paints from   surface   preparation,   filling   to   erecting   and   dismantling   of scaffolding, finishing the surface etc as directed by Engineer in charge. As directed by Engineer in charge Square Metre 136 0
1598 Colouring 48.14   Providing and applying 2 Coats of 100% Pure acrylic  low VOC  water based   paint   with   to   withstand   for   period   of   atleast   5  years   of approved   make.  Paint  should  provide  durable  long  lasting  silk  finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600  and  ability  to  built  cracks  upto  min  0.7mm.  The  paint  has  to  be applied  on  High  quality  water  based  acrylic  copolymer  primer  with good  alkali  resistance  properties.  With  all  leads  and  lifts  at  all  levels etc. complete, as directed by Engineer in charge. As directed by Engineer in charge Square Metre 154 0
1599 Colouring 48.15   Providing   and   applying    impression   24   carrat   Luxury   paint   of approved   make  &  approved  brand  Emulsion  paint  to  interior  walls and ceilings  of approved quality, colour and shade to  new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer   coats   including   scaffolding,   preparing   the   surface.   etc. complete (Low VOC). As directed by Engineer in charge Square Metre 188 0
1600 Colouring 48.16   Providing and applying  antipeel paint of approved  make &  approved brand exterior Emulsion paint of approved quality, colour and  shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective
Paint).
As directed by Engineer in charge Square Metre 209 0
1601 Colouring 48.17   Providing   and   applying     top   coat   exterior   paint   to   terrace   of approved   make,  shade  and  quality  and  one  coat  of  primer  before applying  textured  paint  including  scaffolding  if  necessary  preparing surface  by  throughly  cleaning  of  oil,  grease,  dirt  and  other  material and   fine   aggregate   (natural   sand/crushed   sand   VSI   grade   finely washed etc.) preparing as required, etc. complete. As directed by Engineer in charge Square Metre 78 0
1602 Roofing 48.18   Providing  &  laying  water  proof  treatment  of  terrace  slab  with  B.B. Coba  in  all  position  with  an  average  thickness  of  150mm  consisting specialised   materials   as   per   the   manufactures   specifications   and covering  10  years  guarantee  on  court  fee  stamp  paper  including  all lead, lift, etc. complete. As directed by Engineer in charge Square Metre 1464 473
1603 Roofing 48.19   Providing   and   applying   two   coats   of   High   Albedo   paint   having minimum  Solar  Reflective  Index  (SRI)  108  (with  solar  reflectance  & thermal  emittance  tested  as  per  ASTM)  C  1549  and  ASTM  C  1371 respectively,  VOC  less  than  10  cc/gm.  The  coating  thickness  and  the methodology   of   application   shall   strctly   as   per   manufacturer's specifitions   and   as   approved   by   engineer   in   charge.   Surface preparation  includes  cleaning  with  metal  wire  brush  to  remove  all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance  of SRI  and also  the durabitity  of coating, all complete as per direction of Engineer - in- incharge. As directed by Engineer in charge Square Metre 236 0
1604 Doors & Windows 48.20   Bamboowood  paneling   or   paneling   and  glazing   in  paneled   and glazed shutters for  doors of 25 to 40mm thick. Providing & fixing in position Phenol bonded Bamboowood paneling of 10mm thick, in 25 to  40  mm  thick  paneled  or  paneled  and  glazed  shutters  for  doors, windows,  clerestorey  windows  in  approved  colous,  texture  &  finishi. The bamboo wood planks shall have minimum density of 1000 kg/cum &   minimum   Hardness   1000   Kgf.   The   panels   shall   have   profiled interlocking system locked in place with bamboo pins, all complete as per direction of the Entgineer inchargeand  (Area of opening for panel inserts excluding portion inside grooves or rebates) As directed by Engineer in charge Square Metre 3192 563
1605 Doors & Windows 48.21   Bamboowood  paneled  or  paneled  and  glazed  Shutters  of  Doors Providing of fixing, in position Phenol bonded Bamboowood panelled or   paneled   and   glazed   shutters   for   doors,   windows,   clerestorey windows  with  pre-molded  30mm  thick  planks,  in  approved  colous, texture  &  finish.  It  shall  have  10mm  wide,  25mm  deep  grove  to  fit inpanels.  The  bamboowood  shall  have  minimum  density  of  1000 Kg/cum,  minimum  Hardness  1000  Kgf.  All  styles  and  rails  shall  have profiled  interlocking  system  locked  in  place  by  bamboo  pins,  all complete as per direction of Engineer in-charge  (The paneling will be paid for separately) As directed by Engineer in charge Square Metre 5133 191
1606 Doors & Windows 48.22   Providing  and  fixing  in  position  U.P.V.C.(Unplasticized  Poly  Vinyl Chloride) having multi-chambered outer frame section (73 x 50)mm with  an  outer  wall  thickness  of  2mm  &  steel  reinforcement,  multi- chambered slider frame (73x 60) mm with steel reinforcement, multi- chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm  spacer  of  good  quality  including  alluminium  track,  Inter-locking profile,   coextruded   beadings,   EPDM   gaskets,silicon   sealent,sliding handle,  fixtures  and  fastenings  (couplings,  hinges)  including  with  all required  screws  and  nuts  with  all  necessary  U.P.V.C.  sections  as  per the   detailed   drawing   and   as   directed   by  Engineer-In-Charge   etc. complete. As directed by Engineer in charge Square Metre 9462 0
1607 Doors & Windows 48.23   Sliding  Window-  3  Track  (2  Glass  shutter  +  1  flymesh)  of  approved make  with  DGU,  providing  and  fixing  of  Sliding  Window-  3  Track  (2 Glass  shutter  +  1  flymesh  ).  For  details  refer  to  Specifications.  As directed by Engineer in charge. As directed by Engineer in charge Square Metre 20450 0
1608 Doors & Windows 48.24   Providing & fixing of Casement fixed window  of approved make with DGU.  The  extruded  aluminium  sections  of  Alloy  6063  tolerances confirming  to  DIN  standard  from  approved  raw  material  V2  /  V4  as directed by Engineer in charge. As directed by Engineer in charge Square Metre 17450 0
1609 Plumbing 48.25   Providing  and  fixing   sink  cock  with  regular  swinging  spout  (Wall Mounted  Model)  with  wall  flange  with  approved   make  incluidng other  necessary  fitting,  etc.  complete  as  directed  by  Engineer  in
charge.
As directed by Engineer in charge Number 1924 37
1610 Plumbing 48.26   Providing  and  fixing   sink  cock  with  regular  swinging  spout  (Wall Mounted  Model)  with  wall  flange  with  approved   make  incluidng other necessary fitting, etc complete as directed by Engineer in charge. As directed by Engineer in charge Number 1594 37
1611 Plumbing 48.27   Providing and fixing C.P. 2 Way BIB cock with wall flange of approved
make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
As directed by Engineer in charge Number 1729 37
1612 Plumbing 48.28   Providing and fixing C.P. BIB cock with wall flange of approved  make
including  necessary  sockets/  union  nut  etc.  complete  as  directed  by Engineer in charge.
As directed by Engineer in charge Number 1319 37
1613 Plumbing 48.29   Providing and fixing  Hand shower (health faucet) with 8mm dia. 1m long  flexible  tube  having  wall  hook  with   approved   make  including necessary sockets/ union nut etc. complete as directed by Engineer in
charge.
As directed by Engineer in charge Number 1642 37
1614 Plumbing 48.3   Providing and fixing white european type wall-hung, of size 360mm x 360mm x  575mm with flush valve  of approved   make   including  soil pipe,  vent  pipe  upto  outside  face  of  wall,  100mm  dia  C.I.  plug  bend inlet  pipe  all   fittings,cutting   &   making   good  walls,   floors   etc   as directed by Engineer in charge. As directed by Engineer in charge Number 17471 624
1615 Plumbing 48.31   Providing  and  fixing  white  glazed  urinal  of  series   with  Pressmatic auto closing  valve  of having   32mm diameter P.V.C.  flush pipe  with fitting  and  flushing  of  approved   make  and   arrangement  including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge. As directed by Engineer in charge Number 9987 624
1616 Plumbing 48.32   Providing    and    fixing     wall    hung    white    wash    basin    of    size 350x450x165mm  with  approved   make  pillar  cock,  C.P.  Angular  stop cock long thread approved make continental  including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge. As directed by Engineer in charge Number 5116 624
1617 Plumbing 48.33   Providing  and  fixing   Shower  Head  with   shower  arm  of  approved make shower tube  hand shower  with divertor of spout  including all necessary  pipe  fittings  and  connections  etc. complete  as  directed  by
Engineer in charge.
As directed by Engineer in charge Number 16060 624
1618 Plumbing 48.34   Providing  and  fixing   Shower  Head,  with   shower  arm  of  approved make  mixer  of   including  all  necessary  pipe  fittings  and  connections etc. complete as directed by Engineer in charge. As directed by Engineer in charge Number 6284 624
1619 Plumbing 48.35   Providing  and  fixing   Oval  Type  Under  Counter  Wash Hand  Basin of 420 x 590 x 195mm size with  pillar cock, C.P.Angular stop cock, long thread  of  approved  make  continental  including  SS  bottle  trap  of necessary  pipe connection up to  the outside face of the wall, having Telephonic  Black  /  Colour  Granite  of  180  mm  thick  fixed  on  Black Kadappa Framework, etc. Complete as directed by Engineer in charge. As directed by Engineer in charge Number 17800 624
1620 Plumbing 48.36   Providing    and    fixing     Table    top    white    wash    basin    of    size 120x635x405mm  rubber  plugs  and  brass  chain,  with   pillar  cock, C.P.Angular  stop  cock  long  thread,  continental   including  S.S.  bottle trap  of  approved  make  having   necessary  pipe  connection  up  to theoutside  face  of  the  wall.etc  complete  as  directed  by  Engineer  in
charge.
As directed by Engineer in charge Number 22268 624
1621 Plumbing 48.37   Providing  and  fixing  white  Opal  series European  type  wall-hung,   of size   400mmx370mmx575mm   with   approved   make   flush   valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. As directed by Engineer in charge Number 17574 624
1622 Plumbing 48.38   Providing   and   fixing    Orissa   Pan   of   size   580x445x260   mm   with approved make flush valve  including trap, C.I. soil and vent pipe upto outside   face   of   wall   including   100mm   dia.   C.I.   plug,   bend   and necessary  pipe  connection,  etc  complete.  As  directed  by  Engineer  in
charge.
As directed by Engineer in charge Number 6294 624
1623 Plumbing 48.39   Providing  and  fixing  C.P.   a  2-Way   BIB   cock   with  wall   flange  of approved  make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. As directed by Engineer in charge Number 2364 223
1624 Plumbing 48.4   Providing  and  fixing  white  wash  basin  with  half  pedestal  of  size 515mmX615mmX460mm including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including
S.S. bottle trap of necessary pipe connection upto the outside face of
the wall.
As directed by Engineer in charge Number 11565 0
1625 Plumbing 48.41   Providing  and  fixing  white  european  type  wall-hung  pan,   of  size 350mm   x   355mm   x   570   mm      concealed   flush   tank   with floor- mounting  frame  installing  kit  and  drain  pipe  connection  set  for  wall hung  WC,  with  approved  make  square  control  plates  including  soil pipe,  vent  pipe  upto  the  outside  face  of  wall,  100mm  dia  C.I.  plug bend  inlet  pipe  all  fittings,cutting  &  making  good  walls,  floors  etc.
complete.
As directed by Engineer in charge Number 30447 0
1626 Plumbing 48.42   Providing  and  fixing  Orissa  type  white  glazed  earthenware  water closet  pan  of  size  260mm  x  440mm  x  580mm  with approved   make Slim wall  hung cistern with installation kit  including S or P trap with cast iron soil  and vent  pipe upto  outside face  of the  wall  1:2:4  brick bat  lime  concrete  bedding  without  flushing  tank  and  its  accessories etc.complete. As directed by Engineer in charge Number 3358 0
1627 Plumbing 48.43   Providing and fixing white glazed  urinal of size 710x460x300mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting and flushing arrangement including  lead  soil  pipe,  lead  trap  &  soil  pipe  connection  upto  the outside face of wall etc complete. As directed by Engineer in charge Number 14523 0
1628 Plumbing 48.44   Providing  and  fixing  of  approved  make  white  aquafree  Waterless
Urinal of with cartride size of 31.5x33x60cm including other necessary fittings etc. complete.
As directed by Engineer in charge Number 17998 624
1629 Plumbing 48.45   Providing    and    fixing     wall-hung    white    wash    basin    of    size 470x575x190mm   of   approved   make   half   pedestal,   pillar   cock, C.P.Angular  stop  cock,  long  thread  continental  including  S.S.  bottle trap of   having  necessary  pipe  connections  up  to  the  outside face  of
the wall.etc complete.
As directed by Engineer in charge Number 8806 624
1630 Rain water harvesting 48.46   RWH  -  Shallow  Percolation  Pit  providing,  constructing  2.0m  deep shallow  depth  percolation  pit  comprising  of  1.0m  dia  pre-cast  RCC rings,  300mm  thick  side  filling  around  outside  of  RCC  rings  (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade   finely   washed   etc.)   including   netlon   mesh   between   each gravel/fine  aggregate  (natural  sand/crushed  sand  VSI  grade  finely washed  etc.)  media  layer  including  covering  with  RCC  slab,  manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be    inclusive    of    all     labour,    material,    wastage,    scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge As directed by Engineer in charge Number 51500 0
1631 Rain water harvesting 48.47   RWH - Recharge Pit
Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of  solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick  sidefilling  around  outside  of  RCC  rings  (annular  space)  with 40mm size boulders including filling of recharge pit up to 0.5m depth with  25-75mm  clean  washed  gravels  from  bottom  up  followed  by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed  river  fine  aggregate  (natural  sand/crushed  sand  VSI  grade finely  washed  etc.)  including  netlon  mesh  between  each  gravel/fine aggregate  (natural  sand/crushed  sand  VSI  grade  finely  washed  etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet &  outlet  pipe  excavation  &  backfilling  as  shown  in  the  drawing.The rate  shall  be  inclusive  of  all  labour,  material,  wastage,  scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
As directed by Engineer in charge Number 91300 0
1632 Rain water harvesting 48.48   Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable  method  prescribed  in  IS:  2800  (part  I),  including  collecting samples from different strata, preparing and submitting strata  chart/ bore  log,  including  hire  &  running  charges  of  all  equipments,  tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. As directed by Engineer in charge Running metre 412 89
1633 Rain water harvesting 48.49   Supplying, assembling, lowering and fixing in vertical position in bore well,  unplasticized  PVC  medium  well-casing  pipe  of  150mm  dia, conforming  to  IS:12818,  including  required  hire  and  labour  charges, fittings  &  accessories  etc.  all  complete,  for  all  depths,  as  per  the direction of Engineer in charge. As directed by Engineer in charge Running metre 468 17
1634 Rain water harvesting 48.50   Supplying, assembling, lowering and fixing in vertical position in bore well,   unplasticized  PVC   medium  well   screen   pipes  with  ribs  of 100mm  dia,  conforming  to  IS:12818,  including  required  hire  and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. As directed by Engineer in charge Number 324 6
1635 Rain water harvesting 48.51   Supplying,  filling,  spreading  &  leveling  stone  boulders  of  size  range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge. As directed by Engineer in charge Cubic Metre 688 149
1636 Rain water harvesting 48.52   Supplying,  filling,  spreading  &  leveling  gravels  of  size  range  5mm  to 10mm,  in  the  recharge  pit,  over  the  existing  layer  of  boulders,  in required thickness, for all leads & lifts, all complete as per direction of
Engineer-incharge.
As directed by Engineer in charge Cubic Metre 1117 149
1637 Rain water harvesting 48.53   Supplying, filling, spreading & leveling coarse fine aggregate (natural sand/crushed  sand  VSI  grade   finely   washed  etc.)   of  size   range 1.5mm to 2mm in recharge pit, in required thickness
over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.
As directed by Engineer in charge Cubic Metre 993 146
1638 Rain water harvesting 48.54   Gravel  packing  in tubewell  construction in accordance with IS:4097, including providing gravel: fine/ medium/ coarse,  in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge. As directed by Engineer in charge Cubic Metre 1147 178
1639 Others 48.55   Providing and Fixing Sun Louvre panels roll formed, 0.6mm thick, pre- painted stove enameled aluminium strip of a corrosion resistant alloy, including  necessary  fitting  etc.  complete,  as  directed  by  Engineer  in
Charge.
As directed by Engineer in charge Square  Metre 7091 0
1640 Others 48.56   Providing  &  fixing  heat  insulation  by  wrapping  the  pipes  with  glass
wool/asbestos  fibre  rope  or  tape/videoflex  32  mm  as  directed  by Engineer in charge.
As directed by Engineer in charge Running metre 220 0
1641 Others 48.57   Providing  &  fixing  heat  insulation  by  wrapping  the  pipes  with  glass
wool/asbestos  fibre  rope  or  tape/videoflex  25  mm  as  directed  by Engineer in charge.
As directed by Engineer in charge Running metre 169 0
1642 Others 48.58   Providing  &  fixing  heat  insulation  by  wrapping  the  pipes  with  glass
wool/asbestos  fibre  rope  or  tape/videoflex  15  mm  as  directed  by Engineer in charge.
As directed by Engineer in charge Running metre 136 0
1643 Others 48.59   CoolMortar - Providing & fixing 40mm thick CoolMortar for insulation which  has  proportioned  blend  of  white  cement,  well-graded  fine aggregate  (natural  sand/crushed  sand  VSI  grade  finely  washed  etc.) and  selected  assortment  of  fine  metal  and  mineral  stabilizers  to provide  a  heat  barrier  including  filling  joints,  curing  and  cleaning complete.   The   rate   shall   be   inclusive   of   all   labour,   material, scaffolding, transportation, taxes, including all  leads, lifts  at all  levels and shall be as directed by Engineer in charge. As directed by Engineer in charge Square  Metre 3222 0
1644 Others 48.60   Bamboowood  10mm  thick  Wall  Cladding  including  Threshold  &  T- mold  -  Providing  &  fixing  in  position  Phenol  bonded  Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1900mm length  (minimum)  and  135mm  wide  approved  colour,  texture  and finish,   having   Performance   Appraisal   Certificate   (PAC)   issued   by Building  materials  &  Technology  Promotion  Council  (BMTPC).  with necessary  profiled  edges  fixed  with  BR  nails  to  frame  work  made  of second class teak wood of size 50 x 50mm in centre and ends of each tile.  The  bamboowood  cladding  shall  be  laid  over  teak  wood  frame and hold in place by  50mm thick  teak wood  placed in  centre of  two teak   wood   and   backlayment   and   covered   with   1.00mm   thick expanded poly ethylene foam of density 25kg/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The Bamboowood planks  shall  have minimum density  of  1000  kg/cum  &  minimum  Hardness  1000  Kgf.  with  Eco friendly UV coating, all complete as per direction of Engineer in-charge. As directed by Engineer in charge Square Metre 6820 975
1645 Others 48.61   Bamboowood  10mm  thick  Wall  Cladding  including  Threshold  &  T- mold  for  Accoustic  purpose  Providing  &  fixing  in  position  Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1900mm length (minimum) and 135mm wide approved colour,  texture  and  finish,  having  Performance  Appraisal  Certificate (PAC)  issued  by  Building  Materials  &  Technology  Promotion  Council (BMTPC)  with  necessary  profiled  edges  fixed  with  BR  nails  to  frame work  made  of  second  class  teak  wood  of  size  50  x  50  mm  in  centre and  ends  of  each  tile.  The  bamboowood  cladding  shall  be  laid  over glass wool of 50mm thickness filled in between two teak wood frame and hold in place by 50mm thick teak wood placed centre of two teak wood and covered with mesh (rabbit) fixed to teak woodframe work with   wire  nails   as   backlayment   and  covered   with  1.00mm   thick expanded poly ethylene foam of density 25kg/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame
under cladding. The Bamboowood planks shall have minimum density of 1000 kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.
As directed by Engineer in charge Square Metre 6344 300

*****