HIGHWAYS



ANNEXURE-X
ADDITIONAL NEW ITEMS FOR HIGHWAYS DEPARTMENT
SI. No. Description of Item Unit Basic Rate approved
for the year 2019-2020
(w.e.f. 17.06.2019)
1 Supplying and installation of STRIP SEAL EXPANSION JOINT system confirming to specifications for road and bridge works in the 40mm wide expansion gap provided in between decks over piers and in between deck and dirt wall over abutment with fatigue tested structural steel section at the nosing and anchorage assembly, including labour, equipment and incidental charges for fixing the joints complete in all respects, as per section 2600 of MORT & H specification (V Revision) RM 11800
2 Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete RM 550
3 Supplying and fixing GI DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanised iron pipes and flats and fixing them in position, etc., complete as per cl 2705 of MORT&H specification. (V Revision) Each 2100
4 Supplying and fixing KRAFT PAPER for full width of seating of deck slab and including cost and conveyance to worksite, labour for fixing the same in correct position and all other incidental charges etc., complete. sqm. 100
5 Supplying and Fixing of ELASTOMERIC BEARING as shown in the drawing including cost and conveyance to work site, labour for fixing the bearing in position and all other incidental charges etc., complete as per section 2000 of MORT & H specification. (V Revision) Cum 1.5
6 Supply of NP3 Class RCC Pipe confirming to IS 458/2003 including cost of pipe as a finished work including all other incidental charges, testing charges including loading, unloading, transport and delivery in good condition at work site etc., complete, as directed by the Departmental Officers, as per standard specifications.    
a 1200mm dia RM 5400
b 1000mm dia RM 3700
c 900mm dia RM 3300
7 Hoisting and fixing of NP3 Class RCC Pipe and Collars in proper gradient including all labour charges and all other incidental charges etc., complete, as directed by the Departmental Officers, as per standard specifications.    
a 1200mm dia RM 227
b 1000mm dia RM 197
c 900mm dia RM 240
NOTE:    
1 The Basic Rate adopted under this Head, "Annexure-X - Additional New Items for Highways Department" is exclusive of all taxes and GST.

*****