*IMPORTANT IS CODES*



IMPORTANT IS CODES 

1 IS 10430 : 2000 Criteria for Design of Lined Canals and Guidance for Selection of Type of Lining
2 IS 10646 : 1991 Canal linings - Cement concrete tiles
3 IS 11570 : 1985 Criteria for hydraulic design of irrigation intake structures
4 IS 11809 : 1994 Lining For Canals By Stone Masonry - Code Of Practice
5 IS 12331 : 1988 General Requirements for Canal Outlets
6 IS 12379 : 1988 Code of practice for lining of water-courses and field channels
7 IS 13143 : 1991 Joints in concrete lining of canals - sealing compound
8 IS 16238 : 2017 Planning of Parallel Canals - Guidelines
9 IS 16472 : 2016 Design and Construction of Water Courses - Guidelines
10 IS 3872 : 2002 Lining of Canals with Burnt Clay Tiles - Code of Practice
11 IS 3873 : 1993 Laying cement concrete/stone slab lining on canals - Code of practice
12 IS 4410 : Part 15 : Sec 1 : 1973 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 1 General terms
13 IS 4410 : Part 15 : Sec 2 : 1973 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 2 Transitions
14 IS 4410 : Part 15 : Sec 3 : 1977 Glossary of Terms Relating to River Valley Projects - Part XV : Canal Structures - Section 3 : Flumes
15 IS 4410 : Part 15 : Sec 4 : 1977 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 4 Regulating works
16 IS 4410 : Part 15 : Sec 5 : 1992 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 5 Cross drainage works
17 IS 4410 : Part 5 : 1982 Glossary of terms relating to river valley projects: Part 5 Canals
18 IS 4515 : 2002 Stone Pitched Lining for Canals - Code of Practice
19 IS 4558 : 1995 Under-drainage of lined canals - Code of practice
20 IS 4701 : 1982 Code of practice for earthwork on canals
21 IS 4839 : Part 1 : 1992 Maintenance of canals - Code of practice : Part 1 Unlined canals
22 IS 4839 : Part 2 : 1992 Maintenance of canals - Code of practice : Part 2 Lined canals
23 IS 4839 : Part 3 : 1992 Code of Practice for Maintenance of Canals - Part 3 : Canal Structures, Drains, Outlets, Jungle, Clearance, Plantation and Regulation
24 IS 5256 : 1992 Sealing Expansion Joints in Concrete Lining of Canals - Code of practice
25 IS 5690 : 1982 Guide for laying combination lining for existing unlined canals
26 IS 5968 : 1987 Guide for planning and layout of canal system for irrigation
27 IS 6004 : 1980 Criteria for hydraulic design of sediment ejector for irrigation and power channels
28 IS 6522 : 1972 Criteria for design of silt vanes for sediment control in offtaking canals
29 IS 6531 : 1994 Canal Head Regulators - Criteria for Design
30 IS 6936 : 1992 Guide for location, selection and hydraulic design of canal escapes
31 IS 7112 : 2002 Criteria for Design of Cross-Section for Unlined Canals in Alluvial Soil
32 IS 7113 : 2003 Soil-Cement Lining for Canals - Code of Practice
33 IS 7114 : 1973 Criteria for hydraulic design of cross regulators for canals
34 IS 7331 : 1981 Code of practice for inspection and maintenance of cross-drainage works
35 IS 7495 : 1974 Criteria for hydraulic design of silt selective head regulator for sediment control in offtaking canals
36 IS 7784 : Part 1 : 2013 Design of cross drainage works- Code of practice : Part 1 General features
37 IS 7784 : Part 2 : Sec 1 : 1995 Design of cross drainage works -Code of practice : Part 2 Specific requirements Section I Aqueducts
38 IS 7784 : Part 2 : Sec 2 : 2000 Code of Practice for Design of Cross Drainage Works - Part 2 : Specific Requirements - Section 2 : Superpassages
39 IS 7784 : Part 2 : Sec 3 : 1996 Code of practice for design of cross drainage works: Part 2 Specific requirements Section 3 Canal syphons
40 IS 7784 : Part 2 : Sec 4 : 1999 Design of Cross Drainage Works - Code of Practice - Part 2 : Specific Requirements - Section 4 : Level Crossings
41 IS 7784 : Part 2 : Sec 5 : 2000 Code of Practice for Design of Cross Drainage Works - Part 2 : Specific Requirements - Section 5 : Syphon Aqueducts
42 IS 7871 : 1975 Criteria for hydraulic design of groyne walls (curved wing) for sediment distribution at offtake points in a canal
43 IS 7873 : 1975 Code of practice for lime concrete lining for canals
44 IS 7880 : 1975 Criteria for hydraulic design of skimming platform for sediment control in offtaking canal
45 IS 7986 : 1976 Code of practice for canal outlets
46 IS 8835 : 1978 Guidelines for planning and design of surface drains
47 IS 9097 : 1979 Guide for laying lining of canals with hot bitumen or bituminous felts
48 IS 9447 : 1980 Guidelines for assessment of seepage losses from canals by analytical method
49 IS 9451 : 1994 Guidelines for lining of canals in expansive soils
50 IS 9452 : Part 1 : 1993 Measurement of seepage losses from canals - Code of practice: Part 1 Ponding method
51 IS 9452 : Part 2 : 1980 Code of practice for measurement of seepage losses from canals: Part 2 Inflow - Outflow method
52 IS 9452 : Part 3 : 1988 Code of Practice for Measurement of Seepage Losses from Canals - Part 3 : Seepage Meter Method
53 IS 9698 : 1995 Lining of Canals with Polyethylene Film - Code of Practice
54 IS 9913 : 2000 Code of Practice for Construction of Cross Drainage Works

OTHER IMPORTANT IS CODES 

1 IS 3872 :2002 Lining of Canals with Burnt Clay Tiles - Code of Practice
2 IS 3873:1993 Laying cement concrete/stone slab lining on canals - Code of practice
3 IS 4410-5 :1982 Glossary of terms relating to river valley projects, Part 5: Canals
4 IS 4410-15-2:1973 Glossary of terms relating to river valley projects, Part 15: Canal structures, Section 2: Transitions
5 IS 4410-15-3 :1977 Glossary of Terms Relating to River Valley Projects, Part XV: Canal Structures, Section 3: Flumes
6 IS 4410-15-4 :1977 Glossary of terms relating to river valley projects, Part 15: Canal structures, Section 4: Regulating works
7 IS 4410-15-5:1992 Glossary of terms relating to river valley projects, Part 15: Canal structures, Section 5: Cross drainage works
8 IS 4515 :2002 Stone Pitched Lining for Canals - Code of Practice
9 IS 4558:1995 Under-drainage of lined canals - Code of practice
10 IS 4701:1982 Code of practice for earthwork on canals
11 IS 4839-1 :1992 Maintenance of canals - Code of practice, Part 1: Unlined canals
12 IS 4839-2 :1992 Maintenance of canals - Code of practice, Part 2: Lined canals
13 IS 4839-3:1992 Code of Practice for Maintenance of Canals, Part 3: Canal Structures, Drains, Outlets, Jungle, Clearance, Plantation and Regulation
14 IS 5256 :1992 Sealing Expansion Joints in Concrete Lining of Canals - Code of practice
15 IS 5690:1982 Guide for laying combination lining for existing unlined canals
16 IS 5968:1987 Guide for planning and layout of canal system for irrigation
17 IS 6004:1980 Criteria for hydraulic design of sediment ejector for irrigation and power channels
18 IS 6522:1972 Criteria for design of silt vanes for sediment control in offtaking canals
19 IS 6936:1992 Guide for location, selection and hydraulic design of canal escapes
20 IS 7112 :2002 Criteria for Design of Cross-Section for Unlined Canals in Alluvial Soil
21 IS 7113 :2003 Soil-Cement Lining for Canals - Code of Practice
22 IS 7114:1973 Criteria for hydraulic design of cross regulators for canals
23 IS 7331 :1981 Code of practice for inspection and maintenance of cross-drainage works
24 IS 7495:1974 Criteria for hydraulic design of silt selective head regulator for sediment control in offtaking canals
25 IS 7784-1:1993 Design of cross drainage works- Code of practice, Part 1: General features
26 IS 7784-2-1:1995 Design of cross drainage works -Code of practice, Part 2: Specific requirements Section I Aqueducts
27 IS 7784-2-2:2000 Code of Practice for Design of Cross Drainage Works, Part 2: Specific Requirements, Section 2: Superpassages
28 IS 7784-2-3:1996 Code of practice for design of cross drainage works, Part 2: Specific requirements, Section 3: Canal syphons
29 IS 7784-2-4:1999 Design of Cross Drainage Works - Code of Practice, Part 2: Specific Requirements, Section 4: Level Crossings
30 IS 7784-2-5:2000 Code of Practice for Design of Cross Drainage Works, Part 2: Specific Requirements, Section 5: Syphon Aqueducts
31 IS 7871:1975 Criteria for hydraulic design of groyne walls (curved wing) for sediment distribution at offtake points in a canal
32 IS 7873:1975 Code of practice for lime concrete lining for canals
33 IS 7880:1975 Criteria for hydraulic design of skimming platform for sediment control in offtaking canal
34 IS 7986:1976 Code of practice for canal outlets
35 IS 8835:1978 Guidelines for planning and design of surface drains
36 IS 9097:1979 Guide for laying lining of canals with hot bitumen or bituminous felts
37 IS 9447:1980 Guidelines for assessment of seepage losses from canals by analytical method
38 IS 9451:1994 Guidelines for lining of canals in expansive soils
39 IS 9452-1:1993 Measurement of seepage losses from canals - Code of practice, Part 1: Ponding method
40 IS 9452-2:1980 Code of practice for measurement of seepage losses from canals, Part 2: Inflow - Outflow method
41 IS 9452-3:1988 Code of Practice for Measurement of Seepage Losses from Canals, Part 3: Seepage Meter Method
42 IS 9698:1995 Lining of Canals with Polyethylene Film - Code of Practice
43 IS 9913:2000 Code of Practice for Construction of Cross Drainage Works
44 IS 10430 :2000 Criteria for Design of Lined Canals and Guidance for Selection of Type of Lining
45 IS 10646:1991 Canal linings - Cement concrete tiles
46 IS 11809:1994 Lining for canals by stone masonry - Code of practice
47 IS 12331:1988 General Requirements for Canal Outlets
48 IS 12379:1988 Code of practice for lining of water-courses and field channels
49 IS 13143:1991 Joints in concrete lining of canals - sealing compound

SOME OTHER IMPORTANT IS CODES/General

1 IS 456:2000  Code of practice for plain and reinforced concrete (fourth revision)
2 IS 457:1957  Code of practice for general construction of plain and reinforced concrete for dams and other massive structures
3 IS 1343:2012  Code of practice for prestressed concrete (second revision)
4 IS 3370(Part 1):2009  Code of practice for concrete structures for storage of liquids: Part 1 General requirements (first revision)
5 IS 3370(Part 2):2009  Code of practice for concrete structures for storage of liquids: Part 2 Reinforced concrete structures (first revision)
6 IS 3370(Part 3):1967  Code of practice for concrete structures for the storage of liquids: Part 3 Prestressed concrete structures
7 IS 3370(Part 4):1967  Code of practice for concrete structures for the storage of liquids: Part 4 Design tables
8 IS 800:2007  Code of practice for general construction in steel (third revision)
9 IS 801:1975  Code of practice for use of cold formed light gauge steel structural members in general building construction (first revision)
10 IS 802(Part 1/Sec Code of practice for use of structural steel in overhead 1):1995  transmission line towers, Part 1 Materials, Loads and permissible stresses Section 1 Materials and Loads (third revision)
11 IS 802(Part 1/Sec Code of practice for use of structural steel in overhead 2):1992  transmission line towers Part 1 : Material, loads and permissible stress Section 2 Permissible stress (third revision)
12 IS 802(Part 2):1978  Code of practice for use of structural steel in overhead transmission line towers: Part 2 Fabrication, galvanizing, inspection and packing 6 IS 802(Part 3):1978 Code of practice for use of structural steel in overhead transmission line towers: Part 3 Testing
13 IS 803:1976  Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks (first revision)
14 IS 804:1967  Specification for rectangular pressed steel tanks (first revision)
15 IS 805:1968  Code of practice for use of steel in gravity water
16 IS 806:1968  Code of practice for use of steel tubes in general building construction (first revision)
17 IS 808:1989  Dimensions for hot rolled steel beam, column, channel and angle sections (third Revision)
18 IS 811:1987  Specification for cold formed light gauge structural steel sections (second revision)
19 IS 4000:1992  Code of practice for high strength bolts in steel structures (first revision)
20 IS 4014(Part 1):1967  Code of practice for steel tubular scaffolding Part 1 Definitions and materials
21 IS 6533(Part 1):1989  Code of practice for design and construction of steel chimneys Part 1 Mechanical aspects (first revision)
22 IS 6533(Part 2):1989  Code of practice for design and construction of steel chimneys Part 2 Structural aspects (first revision)
23 IS 7205:1974  Safety code for erection of structural steel work
24 IS 7215:1974  Tolerances for fabrication of steel structures
25 IS 10987:1992 Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical storage tanks for petroleum products (first revision)
26 IS 1893:1984  Criteria for earthquake resistant design of structures (fourth revision)
27 IS 1893(Part 1):2002  Criteria for earthquake resistant design of structures: Part 1 General Provisions and buildings (fifth revision)
28 IS 1893(Part 4):2005  Criteria for earthquake resistant design of structures: Part 4 Industrial structures including stack-like structure
29 IS 4326:2013  Code of practice for earthquake resistant design and construction of buildings (third revision)
30 IS 4967:1968  Recommendations for seismic instrumentation for river valley projects
31 IS 4991:1968  Criteria for blast resistant design of structures for explosions above ground
32 IS 6922:1973  Criteria for safety and design of structures subject to underground blasts
33 IS 13827:1993  Improving earthquake resistance of earthen buildings –
34 IS 13828:1993  Improving earthquake resistance of low strength masonry buildings - Guidelines
35 IS 13920:1993  Ductile detailing of reinforced concrete structures subjected to seismic forces- Code of practice
36 IS 13935:2009  Guidelines for evaluation, repair and seismic strengthening of masonry buildings (first revision)
37 IS 15988:2013  Seismic Evaluation and Strengthening of Existing Reinforced Concrete Buildings - Guidelines.
38 IS 875(Part 1):1987  Code of practice for design loads (other than earthquake) for buildings and structures Part 1 Dead loads - Unit weights of building material and stored materials (second revision) (Incorporating IS:1911-1967)
39 IS 875(Part 2):1987  Code of practice for design loads (other than earthquake) for buildings and structures: Part 2 Imposed loads (second revision)
40 IS 875(Part 3):1987  Code of practice for design loads (other than earthquake) for buildings and structures: Part 3 Wind loads (second revision)
41 IS 875(Part 4):1987  Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads (second revision)
42 IS 875(Part 5):1987  Code of practice for design loads (other than earthquake) for buildings and structures Part 5 Special loads and load combinations (second revision)
43 SP 64(S&T):2001  Explanatory Handbook on Indian Standard Code of practice for Design Loads (Other than Earthquake) for Buildings and Structures: Part 3 Wind Loads [IS 875(Part 3):1987]

(Latest IS Codes may be referred)

*****