LIFT IRRIGATION SCHEME



GOVERNMENT OF MAHARASHTRA
COMMON SCHEDULE OF RATES FOR 2017-18
LIFT IRRIGATION SCHEME
 

Sl. No. Item Unit Rate for 2017-18 (Rate in Rs.)
Completed Item Labour
107 Item No.107 :-
Excavation for deep trenches for laying rising main in Earth, Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same upto a distance of 15 metres and lifts of 1.5 m as directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications. (Payable measurements with vertical excavation)
Cum. 76.20 20.00
108 Item No.108 :-
Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, hard man and boulder including trimming to correct line and level and to specified width, including removing the excavated material and stacking or spreading the same upto a distance of 15 metres and lifts of 1.5 m as directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.
(Payable measurements with vertical excavation)
Cum. 93.10 27.00
109 Item No.109 :-
Excavation for deep trenches for laying rising main in Soft Rock by crow bar and shavel including trimming to correct line and level and to specified width including trimming and levelling the bed by chiselling, removing the excavated material and stacking the same upto a distance of 15 metres and lifts of 1.5 m as directed and safety precautions to keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.
(Payable measurements with vertical excavation)
Cum. 112.90 25.00
110 Item No.110 :-
Excavation for deep trenches for laying rising main in Hard Rock of any toughness by blasting to correct line and level and to specified width including trimming and levelling the bed as directed, removing the excavated material and sorting, stacking the same upto a distance of 15 metres and lifts of 1.5 m as directed, preparing the bed for foundation and keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.
(Payable measurements with vertical excavation)
Cum. 411.20 348.40
111 Item No.111 :-
Murum bedding in trenches with murum of approved quality in layers not exceeding 150 mm to 200 mm, each layer shall be consolidated by watering and ramming as directed etc complete.
Cum. 151.10 109.50
112 Item No.112 :-
Providing and filling in sand boxing in trenches with sand of approved quality including watering and compaction as directed etc complete.
Cum. 764.20 107.10
113 Item No.113 :-
Backfilling the trenches in layers not exceeding 300 mm, each layer shall be consolidated by watering and ramming without disturbing the pipe line with excavated stuff as directed including breaking of clods of soil etc complete. (The backfilling on the two sides of the pipeline should be carried out simultaneously)
Cum. 157.90 157.90
114 Item No.114 :-
Manufacturing, Providing and Supplying spirally welded / ERW / SAW / fabricated M.S. pipes (Commercial Quality) made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable lengths to form pipes, all continuous spiral/circumferential and longitudinal welding to form a pipe on automatic welding machine using electrodes having weldmark E7018 (Low Hydrogen electrodes) and forming 'V' edge on both ends of pipes, (Item contd. on next page) third party inspection charges, lowering and laying to correct position on prepared bedding or on pedastals or chairs, field hydraulic testing at specified test pressure as per IS 5822: 1994 sec 11, field welding to join pipes after laying, Radiographic (5%) and ultrasonic (10%) testing of welds including all equipments submitting report, expert personnel required for testing, interpreting and submitting report along with develop film where applicable, all incidental charges etc complete as per IS - 3589:2001 and as per specifications (No negative Tolerance in thickness is permissible).
Kg 66.25 12.40
115 Item No.115 :-
Lowering, laying in position to correct line & level including M.S. pipes with / without any outcoating on prepared bedding or on pedaetals or chairs or upon prepared formation including loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 m etc. completed as specified with all lead & lift etc. complete including field hydraulic testing at specified pressure and as per procedure mentioned in section 11 of IS 5822: 1994. (item to be used only in situations where pipes are already procured)
Kg 6.70 3.89
116 Item No.116 :-
Manufacturing, Providing and Supplying tapers made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding, full welding on either automatic welding machine or manually and forming 'V' edge on both ends for welding it to pipe, including fabrication & full welding of stiffeners as per design requirements, third party inspection charges, lowering & laying to correct position etc, complete as per IS - 3589 and IS - 5504 as applicable and as per detailed specifications. Cost of longitudinal welding and " V " edging required for circumferencial welding required to connect MS special to Rising main / delivery pipes is inclusive in the rate however  circumferencial welding for connecting the M.S. special to Rising main shall be paid separately on running meter basis. (No negative Tolerance in thickness is permissible)
Kg 69.70 14.85
117 Item No.117 :-
Manufacturing, Providing and Supplying "Y" connection with Crotch plate made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding, full welding on either automatic welding machine or manually and forming 'V' edge on all the three ends for welding it to pipe, including fabrication and full welding of crotch plate and stiffeners as per design requirements, third party inspection charges ,lowering & laying to correct position etc, complete as per IS - 3589 and IS - 5504 as applicable as per detailed specifications. Cost of welding of crotch plate is included in the rate. Cost of longitudinal welding and " V " edging required for circumferencial welding required to connect MS special to Rising main /delivery pipe is inclusive in the rate however circumferencial welding required for connecting Y-piece to Rising main / manifold pipe shall be paid separately on running meter basis. (No negative Tolerance in thickness is permissible).
Kg 80.00 18.60
118 Item No.118 :-
Manufacturing, Providing and Supplying "Y" and "T" branches with collar plate made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding, full welding on either automatic welding machine or manually and forming 'V' edge on both ends for welding it to pipe, including fabrication & full welding of collar plate and stiffeners as per design requirements, third party inspection charges ,lowering & laying to correct position etc, complete as per IS - 3589 and IS - 5504 as applicable as per detailed specifications. Cost of "V" edging, machining and welding of collar plate in "Y" and "T" connection is included in the rate. Cost of longitudinal welding and "V" edging required for circumferencial welding required to connect MS special to Rising main / delivery pipes is inclusive in the rate however circumferencial welding required to connect Y/T to Rising main or manifold shall be paid separately on running meter basis. (No negative Tolerance in thickness is permissible).
Kg 71.30 16.10
119 Item No.119 :-
Manufacturing, Providing and Supplying manhole covers made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding and full welding on either automatic welding machine or manually and forming 'V' edge on both ends, including fabrication and full welding of stiffeners as per design requirements, lowering & laying to correct position etc, third party inspection charges complete as per IS - 3589 and IS - 5504 as applicable and as per detailed specifications. Cost of longitudinal welding and 'V' edging required for circumferencial welding required to connect MS special to Rising main /delivery pipes is inclusive in the rate however circumferencial welding required for connecting man hole to Rising main shall be paid separately on running meter basis. Cost of washers , nuts, bolts, etc. required for fixing manhole cover is included in the rate. (No negative Tolerance in thickness is permissible).
Kg 71.30 16.10
120 Item No.120 :-
Manufacturing, Providing and Supplying M S bends made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding, full welding on either automatic welding machine or manually and forming 'V' edge on both ends for welding it to pipe, including fabrication & full welding of stiffeners as per design requirements, lowering & laying to correct position, third party inspection charges etc, complete as per IS - 3589 and IS - 5504 as applicable as per detailed specifications. Cost of longitudinal welding and " V " edging required for circumferencial welding required to connect MS special to Rising main /delivery pipes is inclusive in the rate however circumferencial welding required for connecting M.S. special to Rising Main shall be paid separately on running meter basis.
(No negative Tolerance in thickness is permissible).
Kg 71.30 16.10
121 Item No.121 :-
Manufacturing, Providing and Supplying short pipes, cants made out of MS plate conforming to IS 2062:1992 including procurement of plates, gas cutting to required size and shape, rolling, tack welding, full welding on either automatic welding machine or manually and forming 'V' edge on both ends for welding it to pipe, including fabrication and full welding of stiffeners as per design requirements, lowering & laying to correct position third party inspection charges etc, complete as per IS - 3589 and IS - 5504 as applicable as per detailed specifications. Cost of longitudinal welding and " V " edging required for circumferencial welding required to connect MS special to Rising main /delivery pipes is inclusive in the rate however circumferencial welding required for connecting M.S. special to Rising Main shall be paid separately on running meter basis. (No negative Tolerance in thickness is permissible).
Kg 66.75 13.6
122 Item No.122 :-
Radiographic testing of welded butt joints in Rising main as per Procedure given in IS 4853:1982 including cost of all materials, equipments & expert personnel required for testing, developing, interpreting and submitting report along with developed films, including all incidental charges, transportation to site and local transportation on site etc. complete.
Rmt 1388.40 836.70
123 Item No.123 :-
Ultrasonic testing of field welded joints as per Procedure laid down in IS 4260:1986 including actual testing, interpreting and submitting test report in detail including cost of all materials, equipments & expert personnel required for testing, developing, interpreting and submitting report, including all incidental charges, transportation to site and local transportation on site etc. complete.
Rmt 324.60 184.40
124 Item No.124 :-
Cleaning the surface of rising main pipe by Sand Blasting to expose fresh metal surface ready for painting including removal of all rust, oil, grease, etc. as per specification including all material, labour and equipments etc complete. (Qty. of sand 3cum/100sq.mtr.)
Sqm 70.30 19.60
125 Item No.125 :-
Providing & applying Liquid epoxy coating system to the external surface of Rising Main Pipes as per Annex-B of IS 3589:2001, preferably by airless spray with one coat of Zinc rich epoxy primer (90 % zink (DFT 40 micron , coverage 9 Sqm / lit) and two coats of coal tar epoxy paint (DFT 120 X 2 micron coverage 5 Sqm / Lit / coat) including cleaning the surface to the satisfaction of Engineer in charge by sand blasting / scraping removing oil, grease, other foreign materials including all necessary material , labour with all leads and lifts etc. complete.
Sqm 549.70 335.00
126 Item No.126 :-
Providing & applying Liquid epoxy coating system to the interior surface of Rising Main Pipes as per Annex - B of IS 3589:2001, preferably by airless spray with one coat of Zinc rich epoxy primer (90% zink ,DFT 40 micron , coverage 9 Sqm / lit) and three coats of coal tar epoxy paint (DFT 120 X 3 micron coverage 5 Sqm/Lit/coat) including cleaning the surface to the satisfaction of Engineer in charge by sand blasting /chemical cleaning / scraping removing oil, grease, other foreign materials including all necessary material, labour with all leads and lifts etc. complete. (Qty. of sand 3cum/100sq.mtr.)
Sqm 677.50 426.00
127 Item No.127 :-
Providing and applying external 25 mm thick cement mortar coating in CM 1 : 3 (cement consumption 15.94 kg/sqm) pnumatically under pressure of 2.1 to 2.8 kg /Sq cm, with weld mesh 50 x 50 x 2.54 mm (13 gauge), after duly cleaning the surface by wire brushing, degreasing etc. including necessary admixtures (200 ml / bag of cement), curing, rehandling the pipe from fabrication shop to guniting place and from guniting place to laying location etc. complete with all leads & lifts.
Sqm 464.20 59.90
128 Item No.128 :-
Providing inner cement mortar lining of specified thickness in proportion 1:1.5 using mechanical spinning machine, including all necessary labour, material, plants and equipments, local handling etc. complete as per procedure laid down in IS 3589:2001.
     
  (A) For 9 mm thick inner mortar lining Sqm 315.60 95.70
  (B) For 12 mm thick inner mortar lining Sqm 394.75 100.00
129 Item No.129 :-
Providing 'X' Ray Quality M.S. Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification, using electrodes having weldmark E7018 (Low hydrogen electrodes), including Surface preparation (i.e. Removal of scale, cleaning, etc.) including all materials, labour, equipments, etc. complete.
     
  A : Single 'V' Butt Joint      
  Butt Joint : Plate thickness      
  6 mm  Rmt. 320.00 --
  8 mm  Rmt. 453.00 --
  10 mm  Rmt. 638.00 --
  12 mm  Rmt. 747.00 --
  14 mm  Rmt. 934.00 --
  16 mm  Rmt. 1125.00 --
  18 mm  Rmt. 1348.00 --
  20 mm  Rmt. 1587.00 --
  22 mm  Rmt. 1795.00 --
  25 mm  Rmt. 2055.00 --
  B : Fillet Type Joint      
  Fillet Weld Size      
  4 mm  Rmt 132.00 --
  5 mm  Rmt 198.00 --
  6 mm  Rmt 270.00 --
  8mm  Rmt 373.00 --
  10 mm  Rmt 569.00 --
  12 mm  Rmt 794.00 --
  14 mm  Rmt 1085.00 --
  16 mm  Rmt 1515.00 --
 

*****