Plumbing Works



SECTION (A) - PLUMBING WORKS

(A)-(I) FERRULE AND FERRULE CONNECTION

Item No

Description of Item

All Districts West Bengal

Unit

(Rs.)

 

(a) ORIGINAL WORKS

 

 

1.

Supplying,fitting and fixing brass ferrule including connection with G.I. pipes of TATA make of following dia. and upto 450 mm long with screw,jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge.

 

 

 

(i) 25 mm dia.

Each

1884.00

 

(ii) 20 mm dia.

Each

1338.00

 

(iii) 15 mm dia

Each

981.00

 

(iv) 10 mm dia.

Each

965.00

2.

Supplying, fitting and fixing brass ferrule including connection with P.V.C. pipe of approved make upto 450 mm long with plumbing joint,brass over C.P. coupling at both ends, with cap and lining complete in all respect, including cutting trenches in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge.

 

 

 

(i) 25 mm dia.

Each

1825.00

 

(ii) 20 mm dia.

Each

1267.00

 

(iii) 15 mm dia

Each

942.00

 

(iv) 10 mm dia.

Each

922.00

 

(b) REPAIR WORKS

 

 

1.

Renewing brass ferrule for connecting mains.

 

 

 

(i) 25 mm dia.

Each

1685.00

 

(ii) 20 mm dia.

Each

1160.00

 

(iii) 15 mm dia

Each

853.00

 

(iv) 10 mm dia.

Each

826.00

2.

Dismantling ferrule with all pipe connections.

Each set

172.00

3.

Dismantling existing ferrule with fittings and refixing same after cleaning.

Each Set

191.00

SECTION (A) - PLUMBING WORKS

(A)-(II) G.I. PIPE WORKS AND FITTINGS

Item No

Description of Item

All Districts West Bengal

Unit

(Rs.)

1

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

 

 

 

(A) For Exposed Work

 

 

 

(a) (i) 15 mm dia. light quality

     (ii) 15 mm dia. medium quality

(b) (i) 20 mm dia. light quality

      (ii) 20 mm dia. medium quality

(c) (i) 25 mm dia. light quality

     (ii) 25 mm dia. medium quality

(d) (i) 32 mm dia. light quality

     (ii) 32 mm dia. medium quality

(e) (i) 40 mm dia. light quality

    (ii) 40 mm dia. medium quality

(f) (i) 50 mm dia. light quality

    (ii) 50 mm dia. medium qualit

(g) (i) 65 mm dia. light qualit

     (ii) 65 mm dia. medium quality

(h) (i) 80 mm dia. light quality

     (ii) 80 mm dia. medium quality

(i) (i) 100 mm dia. medium quality

    (ii) 100 mm dia. heavy quality

(j) (i) 125 mm dia. medium quality

    (ii) 125 mm dia. heavy quality

(k) (i) 150 mm dia. medium quality

     (ii) 150 mm dia. heavy quality

(B) For Concealed Work

(a) 15 mm dia. medium quality

(b) 20 mm dia. medium quality

(c) 25 mm dia. medium quality

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

Mtr

 

 

Mtr

Mtr

Mtr

177.00

192.00

201.00

226..00

267.00

305.00

304.00

355.00

352.00

415.00

458.00

540.00

567.00

665.00

706.00

818.00

1033.00

1325.00

1495.00

1543.00

1671.00

 

 

238.00

266.00

364.00

2.

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)

(i) 15 mm dia. medium quality

(ii) 20 mm dia. medium quality

(iii) 25 mm dia. medium quality

 (iv) 32 mm dia. medium quality

(v) 40 mm dia. medium quality

(vi) 50 mm dia. medium quality

 (vii) 65 mm dia. medium quality

(viii) 80 mm dia. medium quality

(ix) 100 mm dia. medium quality

(x) 125 mm dia. medium quality

(xi) 150 mm dia. medium quality

Metre

Metre

Metre

Metre

Metre

Metre

Metre

Metre

Metre

Metre

Metre

214.00

240.00

319.00

354.00

400.00

520.00

645.00

798.00

1006.00

1299.00

1510.00

3.

Supplying, fitting and fixing shower of approved brand and make.

(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(ii) Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

 

 

 

Each

Each

 

 

452.00

360.00

 

 

(iii) Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

 (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).

 (c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar).

 (d) Chromium plated Hand shower with Flexible Tube &

fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).).

 (e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).

 (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar)

(g) PTMT overhead shower ( Prayag or equivalent)

 (i) 75 mm round each 179.00

     (ii) 150 mm round each 340.00

(h) Polythene overhead shower of approved make 15 mm X 125 mm each 154.00

 (i) (1) Chromium plated overhead Rain shower (Square), size-180x180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent)

(i) (2) Chromium plated overhead Rain shower (Round), size-200mm dia. with revolving joint (Model Code No. F7010601 of CERA or equivalent)

(Note: Item 3(b, d, e & f) to be done as per specific direction of the Superintending Engineer)

Each

 

Each

 

Each

 

Each

 

Each

Each

Each

Each

Each

Each

Each

309.00

 

1412.00

 

1228.00

 

2390.00

 

516.00

1251.00

179.00

340.00

154.00

380.00

457.00

4

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).

(i) 100 Dia.

(ii) 80 mm Dia.

 

Each

Each

 

1091.0

5526.00

 

(iii) 65 mm dia.

(iv) 50 mm dia.

(v) 40 mm dia.

(vi) 32 mm dia.

(vii) 25 mm dia.

(viii) 20 mm dia

(ix) 15 mm dia

Each

Each

Each

Each

Each

Each

Each

3949.00

2362.00

1646.00

1258.00

912.00

657.00

521.00

5.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

(i) 100 mm dia

(ii) 80 mm dia

(iii) 65 mm dia

(iv) 50 mm dia

(v) 40 mm dia

(vi) 32 mm dia

(vii) 25 mm dia

(viii) 20 mm dia

(ix) 15 mm dia

 

 

 

Each

Each

Each

Each

Each

Each

Each

Each

Each

 

 

9608.00

5591.00

3929.00

2277.00

1590.00

1160.00

778.00

604.00

438.00

6.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 35 kg per sq. cm. (for gas line only).

(i) 100 mm dia

(ii) 80 mm dia

(iii) 65 mm dia

(iv) 50 mm dia

(v) 40 mm dia

vi) 32 mm dia

(vii) 25 mm dia

(viii) 20 mm dia

(ix) 15 mm dia

 

Each

Each

Each

Each

Each

Each

Each

Each

Each

 

12432.00

6384.00

5016.00

3018.00

2151.00

1622.00

1138.00

789.00

582.00

12.

Supplying, fitting and fixing cast iron spun pipe conforming to I.S.

1536/1976 with all necessary specials including cutting trenches in any soil or through masonry, concrete etc., if necessary,and mending good all damages including jointing pipes with Tyton joints as per manufacturer's specifications and filling up the trenches all complete but excluding the cost of masonry or concrete work, if required

 

 

 

(a) Class A:

 

 

 

(i) 80 mm nominal dia.

Metre

1238.00

 

(ii) 100 mm nominal dia

Metre

1419.00

 

(iii) 125 mm nominal dia

Metre

1963.00

 

(iv) 150 mm nominal dia

Metre

2206.00

 

(v) 200 mm nominal dia

Metre

3251.00

 

(vi) 250 mm nominal dia

Metre

4221.00

 

(vii) 300 mm nominal dia

Metre

5434.00

 

(b) Class A:

 

 

 

(i) 80 mm nominal dia.

Metre

1342.00

 

(ii) 100 mm nominal dia

Metre

1540.00

 

(iii) 125 mm nominal dia

Metre

2134.00

 

(iv) 150 mm nominal dia

Metre

2398.00

 

(v) 200 mm nominal dia

Metre

3537.00

 

(vi) 250 mm nominal dia

Metre

4595.00

 

(vii) 300 mm nominal dia

Metre

5918.00

 

(c) Class LA:

 

 

 

(i) 80 mm nominal dia.

Metre

1133.00

 

(ii) 100 mm nominal dia

Metre

1298.00

 

(iii) 125 mm nominal dia

Metre

1793.00

 

(iv) 150 mm nominal dia

Metre

2013.00

 

(v) 200 mm nominal dia

Metre

2965.00

 

(vi) 250 mm nominal dia

Metre

3847.00

 

(vii) 300 mm nominal dia

Metre

4947.0

13.

Renewing specials only of cast iron spun pipe conforming to I.S.

1536/1976 including cutting trenches in any soil or through masonry, concrete etc., if necessary and mending good damages including jointing with Tyton joints as per manufacturer's specifications excluding the cost of concrete or masonry work, if required, but including the cost of filling up trenches (for all dia. specials, payment will be made on the basis of actual weight of the specials).

 

 

Kg

 

 

91.00

14.

Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.

 

 

 

(i) 15 mm

Each

25.00

 

(ii) 20 mm

Each

29.00

 

(iii) 25 mm

Each

31.00

 

(iv) 32 mm

Each

46.00

 

(v) 40 mm

Each

48.00

 

(vi) 50 mm

Each

57.00

 

(vii) 65 mm

Each

121.00

 

(viii) 80 mm

Each

146.00

 

(ix) 100 mm

Each

166.00

15.

Supplying, fitting and fixing self closing C.P. water tap of approved brand and make - 15 mm dia.

Each

273.00

16.

Supplying, fitting and fixing G.I. gravity operated water tap for public use with pilfer proof arrangement of approved brand and make.

 

 

 

(i) 15 mm dia

Each

298.00

 

(ii) 20 mm dia

Each

343.00

17.

Supplying,fitting and fixing steel reducing bush.

(i) 20 mm X 15 mm and below

Each

24.00

 

(ii) 25 mm X 20 mm and below

Each

28.00

 

(iii) 15 mm X 10 mm and below

Each

24.00

 

(iv) 32 mm X 25 mm

Each

47.00

 

(v) 40 mm X 32 mm

Each

59.00

 

(vi) 50 mm X 40 mm

Each

92.00

18.

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. )

 

 

 

(A) Above Ground

 

 

 

(i) 15 mm

Metre

26.00

 

(ii) 20 mm

Metre

27.00

 

(iii) 25 mm

Metre

28.00

 

(iv) 32 mm

Metre

28.00

 

(v) 40 mm

Metre

37.00

 

(vi) 50 mm

Metre

40.00

 

(vii) 65 mm

Metre

47.00

 

(viii) 75 mm dia. / 80 mm dia.

Metre

56.00

 

(ix) 100 mm dia. / 110 mm dia.

Metre

58.00

 

(x) 140 mm dia.

Metre

74.00

 

(xi) 160 mm dia.

Metre

75.00

 

(B)Under Ground

 

 

 

(i) 15 mm

Metre

42.00

 

(ii) 20 mm

Metre

42.00

 

(iii) 25 mm

Metre

42.00

 

(iv) 32 mm

Metre

42.00

 

(v) 40 mm

Metre

47.00

 

(vi) 50 mm

Metre

60.00

 

(vii) 65 mm

Metre

71.0

 

(viii) 75 mm dia. / 80 mm dia.

Metre

85.00

 

(ix) 100 mm dia. / 110 mm dia.

Metre

87.00

 

(x) 140 mm dia.

Metre

88.00

 

(xi) 160 mm dia.

Metre

95.00

19(I)

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work PVC Pipes

 

 

 

(i) 15 mm

Metre

101.00

 

(ii) 20 mm

Metre

129.00

 

(iii) 25 mm

Metre

177.00

 

(iv) 32 mm

Metre

236.00

 

(v) 40 mm

Metre

292.00

 

(vi) 50 mm

Metre

384.00

 

(vii) 65 mm

Metre

599.00

 

(viii) 80 mm

Metre

768.00

 

(ix) 100 mm

Metre

1134.00

 

(x) 125 mm

Metre

1504.00

 

(xi)150 mm

Metre

1824.00

 

(xii) 200 mm

Metre

2703.00

 

(xiii) 250 mm

Metre

3712.00

 

(xiv)300 mm

Metre

5090.00

 

300 mm

 

 

 

(b) For Concealed Work

 

 

 

(Dia)

 

 

 

15 mm

Metre

137.00

 

20 mm

Metre

158.00

 

25 mm

Metre

205.00

19(II)

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)

 

 

 

PVC Pipes(Dia)

 

 

 

(i) 15 mm

Metre

117.00

 

(ii) 20 mm

Metre

143.00

 

(iii) 25 mm

Mertre

191.00

 

(iv) 32 mm

Metre

250.00

 

(v) 40 mm

Metre

311.00

 

(vi) 50 mm

Metre

403.00

 

(vii) 65 mm

Metre

652.00

 

(viii) 80 mm

Metre

795.00

 

(ix) 100 mm

Metre

1162.00

 

(x) 125 mm

Metre

1532.00

 

(xi)150 mm

Metre

1836.00

 

(xii) 200 mm

Metre

2716.00

 

(xiii) 250 mm

Metre

3718.00

 

(xiv)300 mm

Metre

5102.00

19(III)

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).

 

 

 

(A) PVC Pipes Dia

 

 

 

(i) 15 mm

 

 

 

(ii) 20 mm

 

 

 

(iii) 25 mm

 

 

 

(iv) 32 mm

 

 

 

(v) 40 mm

 

 

 

(vi) 50 mm

 

 

 

(vii) 65 mm

 

 

 

(viii) 80 mm

Metre

578.00

 

(ix) 100 mm

Metre

874.00

 

(x) 125 mm

Metre

1174.00

 

(xi)150 mm

Metre

1420.00

 

(xii) 200 mm

Metre

2134.00

 

(xiii) 250 mm

Metre

2947.00

 

(xiv)300 mm

Metre

4071.00

 

(B) Socket (Dia)

 

 

 

(i) 15 mm

Each

10.00

 

(ii) 20 mm

Each

14.00

 

(iii) 25 mm

Each

23.00

 

(iv) 32 mm

Each

33.00

 

(v) 40 mm

Each

42.00

 

(vi) 50 mm

Each

53.00

 

(vii) 65 mm

Each

111.00

 

(viii) 80 mm

Each

180.00

 

(ix) 100 mm

Each

242.00

 

(x) 125 mm

Each

255.00

 

(xi)150 mm

Each

303.00

 

(xii) 200 mm

Each

523.00

 

(xiii) 250 mm

Each

660.00

 

(xiv)300 mm

Each

880.00

 

(C) Elbow (Dia)

 

 

 

(i) 15 mm

Each

13.00

 

(ii) 20 mm

Each

18.00

 

(iii) 25 mm

Each

27.00

 

(iv) 32 mm

Each

41.00

 

(v) 40 mm

Each

69.00

 

(vi) 50 mm

Each

113.00

 

(vii) 65 mm

Each

165.00

 

(viii) 80 mm

Each

266.00

 

(ix) 100 mm

Each

4798.00

 

(x) 125 mm

Each

600.

 

(xi)150 mm

Each

1261.00

 

(xii) 200 mm

Each

1595.00

 

(xiii) 250 mm

Each

2090.00

 

(xiv)300 mm

Each

2530.00

 

(D) Long Bend (90 Degree) (Dia)

 

 

 

(i) 15 mm

Each

25.00

 

(ii) 20 mm

Each

35.00

 

(iii) 25 mm

Each

59.00

 

(iv) 32 mm

Each

95.00

 

(v) 40 mm

Each

143.00

 

(vi) 50 mm

Each

201.00

 

(vii) 65 mm

Each

398.00

 

(viii) 80 mm

Each

592.00

 

(ix) 100 mm

Each

825.00

 

(x) 125 mm

Each

1018.00

 

(xi)150 mm

Each

1144.00

 

(xii) 200 mm

Each

3179.00

 

(xiii) 250 mm

Each

3960.00

 

(xiv)300 mm

Each

4785.00

 

(E) Tee (Dia)

 

 

 

(i) 15 mm

Each

14.00

 

(ii) 20 mm

Each

23.00

 

(iii) 25 mm

Each

36.00

 

(iv) 32 mm

Each

56.00

 

(v) 40 mm

Each

99.00

 

(vi) 50 mm

Each

125.00

 

(vii) 65 mm

Each

241.00

 

(viii) 80 mm

Each

349.00

 

(ix) 100 mm

Each

642.00

 

(x) 125 mm

Each

863.00

 

(xi)150 mm

Each

2255.00

 

(xii) 200 mm

Each

3355.00

 

(xiii) 250 mm

Each

4345.00

 

(xiv)300 mm

Each

5170.00

 

(F) (i) Nipple (75 mm long) (Dia)

 

 

 

(i) 15 mm

Each

11.00

 

(ii) 20 mm

Each

15.00

 

(iii) 25 mm

Each

19.00

 

(iv) 32 mm

Each

28.00

 

(v) 40 mm

Each

34.00

 

(vi) 50 mm

Each

36.0

 

(vii) 65 mm

Each

56.00

 

(viii) 80 mm

Each

83.00

 

(ix) 100 mm

 

 

 

(ii) Nipple (100 mm long) Dia

 

 

 

(i) 15 mm

Each

17.00

 

(ii) 20 mm

Each

23.00

 

(iii) 25 mm

Each

26.00

 

(iv) 32 mm

Each

35.00

 

(v) 40 mm

Each

40.00

 

(vi) 50 mm

Each

42.00

 

(iii) Nipple (150 mm long) (Dia)

 

 

 

(i) 15 mm

Each

19.00

 

(ii) 20 mm

Each

26.00

 

(iii) 25 mm

Each

28.00

 

(iv) 32 mm

Each

36.00

 

(v) 40 mm

Each

44.00

 

(vi) 50 mm

Each

52.00

 

(vii) 65 mm

Each

95.00

 

(viii) 80 mm

Each

123.00

 

(ix) 100 mm

Each

137.00

 

(iv) Nipple (200 mm long) (Dia)

 

 

 

(i) 15 mm

Each

26.00

 

(ii) 20 mm

Each

35.00

 

(iii) 25 mm

Each

47.00

 

(iv) 32 mm

Each

56.00

 

(v) 40 mm

Each

70.00

 

(vi) 50 mm

Each

126.00

 

(vii) 65 mm

Each

164.00

 

(viii) 80 mm

Each

219.00

 

(ix) 100 mm

Each

263.00

 

(v) Nipple (300 mm long) Dia

 

 

 

(i) 15 mm

Each

28.00

 

(ii) 20 mm

Each

38.00

 

(iii) 25 mm

Each

53.00

 

(iv) 32 mm

Each

64.00

 

(v) 40 mm

Each

85.00

 

(vi) 50 mm

Each

103.00

 

(vii) 65 mm

Each

169.00

 

(viii) 80 mm

Each

228.00

 

(ix) 100 mm

Each

375.00

 

(x) 125 mm

Each

328.00

 

(xi)150 mm

Each

450.00

 

(xii) 200 mm

Each

681.00

 

(xiii) 250 mm

Each

1032.00

 

(xiv)300 mm

Each

1568.00

 

(G) Flange (Dia)

 

 

 

(i) 15 mm

Pair

47.00

 

(ii) 20 mm

Pair

66.00

 

(iii) 25 mm

Pair

85.00

 

(iv) 32 mm

Pair

104.00

 

(v) 40 mm

Pair

131.00

 

(vi) 50 mm

Pair

160.00

 

(vii) 65 mm

Pair

253.00

 

(viii) 80 mm

Pair

310.00

 

(ix) 100 mm

Pair

363.00

 

(x) 125 mm

Pair

469.00

 

(xi)150 mm

Pair

591.00

 

(xii) 200 mm

Pair

891.00

 

(xiii) 250 mm

Pair

1032.00

 

(xiv)300 mm

Pair

1313.00

 

(H) Threaded Adopter (Dia)

 

 

 

(i) 15 mm

Each

11.00

 

(ii) 20 mm

Each

15.00

 

(iii) 25 mm

Each

19.00

 

(iv) 32 mm

Each

38.00

 

(v) 40 mm

Each

68.00

 

(vi) 50 mm

Each

94.00

 

(vii) 65 mm

Each

113.00

 

(viii) 80 mm

Each

131.00

 

(ix) 100 mm

Each

178.00

 

(x) 125 mm

Each

235.00

 

(xi)150 mm

Each

272.00

 

(xii) 200 mm

Each

666.00

 

(I) Union (Dia)

 

 

 

(i) 15 mm

Each

28.00

 

(ii) 20 mm

Each

41.00

 

(iii) 25 mm

Each

56.00

 

(iv) 32 mm

Each

85.00

 

(v) 40 mm

Each

122.00

 

(vi) 50 mm

Each

150.00

 

(K) End Plug (Dia)

 

 

 

(i) 100 mm

Each

220.00

 

(ii) 125 mm

Each

611.00

 

(iii)150 mm

Each

907.00

 

(iv) 200 mm

Each

1072.00

 

(v) 200 mm

Each

1452.00

 

(L) Reducing Socket (mm X mm)

 

 

 

20 x15

Each

15.00

 

25 X 15

Each

26.00

 

25 X 20

Each

23.00

 

32 X 25

Each

30.00

 

40 X 25

Each

71.00

 

40 X 32

Each

43.00

 

50 X 25

Each

137.00

 

50 X40

Each

66.00

 

65 X 40

Each

114.00

 

65 X 50

Each

117.00

 

80 X 40

Each

136.00

 

80 X 50

Each

141.00

 

80 X 65

Each

151.00

 

100 X 40

Each

202.00

 

100 X 50

Each

171.00

 

100 X 80

Each

142.00

 

125 X 50

Each

216.00

 

125 X 80

Each

807.00

 

125 X 100

Each

648.00

 

150 X 50

Each

657.00

 

150 X 80

Each

455.00

 

150 X 100

Each

443.00

 

150 X 125

Each

470.00

 

(M) Reducing Tee (mm X mm)

 

 

 

20 x15

 

 

 

25 X 15

 

 

 

25 X 20

 

 

 

40 X 15

 

 

 

40 X 20

 

 

 

40 X 25

 

 

 

40 X 32

 

 

 

50 X 15

 

 

 

50 X 25

 

 

 

50 X 32

 

 

 

65 X 25

 

 

 

65 X 40

 

 

 

75 mm ( outer dia)

m

532.00

 

90 mm ( outer dia )

m

754.00

 

110 mm ( outer dia )

m

1078.00

 

B. For Concealed Work I)SDR 7.4/PN-16 Pipes

 

 

 

20 mm (outer dia )

m

167.00

 

25 mm ( outer dia )

m

216.00

 

32 mm ( outer dia )

m

247.00

22

Supply ,Fitting & Fixing of PVC Bottle waste tap

 

 

 

i) 32 mm

Each

157.00

 

ii) 40 mm

Each

164.00

23

Supply, Fitting & Fixing of 32 mm PVC Waste Nozzle with jamnut, full thread or half thread complete

Each

48.00

24

Supply, Fitting & Fixing of 40 mm PVC Waste Nozzle with jamnut, full thread or half thread complete.

Each

54.00

25

Supply , Fitting & Fixing of Plug with chain for waste with jammut, full thread or half thread complete.

Each

33.00

26

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 15 mm size

Each

28.00

27

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 20 mm size

Each

28.00

28

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 25 mm size

Each

29.00

29

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 32 mm size

Each

29.00

30

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 40 mm size

Each

40.00

31

Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 50 mm size

Each

45.00

32

Supply, Fitting & Fixing of Polythene flange.

 

 

 

i) 15 mm dia

Each

42.00

 

ii) 20 mm dia

Each

60.00

 

iii) 25 mm dia

Each

68.00

 

iv) 40 mm dia

Each

114.00

 

v) 50 mm dia

Each

135.00

33

(A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately)

 

 

 

(i) 15 mm

Metre

46.00

 

(ii) 20 mm

Metre

53.00

 

(iii) 25 mm

Metre

54.00

 

(iv) 32 mm

Metre

79.00

 

(v) 40 mm

Metre

92.00

 

(vi) 50 mm

Metre

93.00

 

(vii) 65 mm

Metre

94.00

 

(viii) 80 mm

Metre

94.00

 

(ix) 100 mm

Metre

124.00

 

(x) 125 mm

Metre

126.00

 

(xi)150 mm

Metre

127.00

 

(B) Labour for fitting and fixing G.I. pipes above ground (concealed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately.)

 

 

 

(i) 15 mm

Metre

93.00

 

(ii) 20 mm

Metre

93.00

 

(iii) 25 mm

Metre

93.00

34.

Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of  painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.)

 

 

 

(i) 15 mm

Metre

61.00

 

(ii) 20 mm

 

68.00

 

(iii) 25 mm

 

68.00

 

(iv) 32 mm

 

79.00

 

(v) 40 mm

 

88.00

 

(vi) 50 mm

 

89.00

 

(vii) 65 mm

 

89.300

 

(viii) 80 mm

 

90.00

 

(ix) 100 mm

 

113.00

 

(x) 125 mm

 

114.00

 

(xi)150 mm

 

116.00

35.

Labour for fitting and fixing G.I. specials including cost of jointing materials.

 

 

 

(a) Plug.

 

 

 

(i) Upto 25 mm dia.

Each

7.00

 

(ii) Above 25 mm upto 50 mm dia.

Each

10.00

 

(iii) Above 50 mm upto 80 mm dia.

Each

11.00

 

(iv) Above 80 mm upto 150 mm dia.

Each

14.00

 

(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece.

 

 

 

(i) Upto 25 mm dia.

Each

7.00

 

(ii) Above 25 mm upto 50 mm dia.

Each

10.00

 

(iii) Above 50 mm upto 80 mm dia.

Each

11.00

 

(iv) Above 80 mm upto 150 mm dia.

Each

14.00

 

(c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple

 

 

 

(i) Upto 25 mm dia.

Each

7.00

 

(ii) Above 25 mm upto 50 mm dia.

Each

10.00

 

(iii) Above 50 mm upto 80 mm dia.

Each

11.00

 

(iv) Above 80 mm upto 150 mm dia.

Each

14.00

 

(d) Cross, Union, Long screw.

 

 

 

(i) Upto 25 mm dia.

Each

7.00

 

(ii) Above 25 mm upto 50 mm dia.

Each

10.00

 

(iii) Above 50 mm upto 80 mm dia.

Each

11.00

 

(iv) Above 80 mm upto 150 mm dia.

Each

14.00

36

Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application.

 

 

 

(i) 150mm internal dia.

Metre

420.00

 

(ii) 200mm internal dia.

Metre

604.00

 

(iii) 250mm internal dia.

Metre

1011.00

 

(iv) 300mm internal dia.

Metre

1349.00

 

(v) 400mm internal dia.

Metre

1950.00

 

(vi) 500mm internal dia.

Metre

3663.00

 

(vii) 600mm internal dia.

Metre

4594.00

 

viii) 800mm internal dia.

Metre

8700.00

 

(ix) 1000mm internal dia.

Metre

13926.00

 

(B) Repair Works:

 

 

1.

Labour for dismantling G.I. pipe with fittings.

 

 

 

(i) 15 mm

Metre

6.00

 

(ii) 20 mm

Metre

6.00

 

(iii) 25 mm

Metre

6.00

 

(iv) 32 mm

Metre

6.00

 

(v) 40 mm

Metre

8.00

 

(vi) 50 mm

Metre

8.00

 

(vii) 65 mm

Metre

8.00

 

(viii) 80 mm

Metre

11.00

 

(ix) 100 mm

Metre

11.00

2.

Refixing G.I. pipe with fittings after cleaning where  necessary.

 

 

 

(i) 15 mm

Metre

6.00

 

(ii) 20 mm

Metre

6.00

 

(iii) 25 mm

Metre

6.00

 

(iv) 32 mm

Metre

8.00

 

(v) 40 mm

Metre

9.00

 

(vi) 50 mm

Metre

9.00

 

(vii) 65 mm

Metre

15.00

 

(viii) 80 mm

Metre

16.00

 

(ix) 100 mm

Metre

16.00

3.

Removing chokage in G.I. pipe including cleaning pipe.

 

 

 

(i) 15 mm

Metre

7.00

 

(ii) 20 mm

Metre

7.00

 

(iii) 25 mm

Metre

7.00

 

(iv) 32 mm

Metre

9.00

 

(v) 40 mm

Metre

9.00

 

(vi) 50 mm

Metre

9.00

 

(vii) 65 mm

Metre

10.00

 

(viii) 80 mm

Metre

10.00

 

(ix) 100 mm

Metre

10.00

4.

Renewing C.I. clamp for pipe including cutting hole in wall etc. and

 

 

 

(i) 15 mm

Each

25.00

 

(ii) 20 mm

Each

29.00

 

(iii) 25 mm

Each

32.00

 

(iv) 32 mm

Each

45.00

 

(v) 40 mm

Each

46.00

 

(vi) 50 mm

Each

58.00

 

(vii) 65 mm

Each

120.00

 

(viii) 80 mm

Each

127.00

 

(ix) 100 mm

each

144.00

5.

Renewing P.V.C. clip with necessary screws.

 

 

 

(i) 15 mm

Each

9.00

 

(ii) 20 mm

Each

11.00

 

(iii) 25 mm

Each

16.00

 

(iv) 32 mm

Each

18.00

 

(v) 40 mm

Each

22.00

 

(vi) 50 mm

Each

25.00

 

(vii) 65 mm

Each

33.00

6.

Opening out leaky water supply pipe and making the joints water tight i(ni)c l uUdpintog 4c0u tmtinmg dthiar.eads

 

 

 

(i) Upto 40 mm dia.

Each

59.00

 

(ii) 50 mm dia.

Each

69.00

 

(iii) 65 mm to 100 mm dia.

Each

113.00

7.

Renewing iron jamnut with washer.

 

 

 

(i) 15 mm

Each

12.00

 

(ii) 20 mm

Each

14.00

 

(iii) 25 mm

Each

15.00

8.

Cutting out pipe and making threads.

 

 

 

i) Upto 20 mm dia.

Each

9.00

 

(ii) Above 20 mm upto 32 mm dia.

Each

12.00

 

(iii) Above 32 mm upto 50 mm dia.

Each

25.00

 

(iv) Above 50 mm upto 80 mm dia.

Each

32.00

 

(v) Above 80 mm upto 150 mm dia.

Each

45.00

9.

Perforating G.I. pipe of all diameters by drilling including taking G.I.

Dozzen

57.00

10.

Making bend/offset in G.I. pipe by heat.

 

 

 

(i) Upto 50 mm dia.

Each

34.00

 

(ii) Above 50 mm upto 80 mm dia.

Each

51.00

 

(iii) Above 80 mm upto 150 mm dia.

Each

147.00

11.

Cutting out section of G.I. water main pipe upto 100 mm.

 

40.00

12.

Dismantling and refixing bib cock or stop cock.

 

 

 

(i) 15 mm

Each

12.00

 

(ii) 20 mm

Each

16.00

13.

Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland

 

 

 

(i) 15 mm

Each

13.00

 

(ii) 20 mm

Each

16.00

 

(iii) 25 mm

Each

17.00

 

(iv) 40 mm

Each

24.00

14.

Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar

 

 

 

(i) 15 mm

Each

74.00

 

(ii) 20 mm

Each

93.00

15.

Dismantling and refixing shower rose after cleaning.

Each

12.00

16.

Renewing cromium plating of

 

 

 

(a) bib cock/ stop cock/ pillar cock/ waste fittings.

Each

49.00

 

(b) Elbow action bib/ pillar tap.

Each

66.00

17

Cutting out existing G.I.F.W. or U.F.W. or gas pipeline to required size

 

 

 

(i) 15 mm to 20 mm

Set

61.00

 

(ii) 25 mm to 32 mm

Set

61.00

 

(iii) 40 mm to 50 mm

Set

88.00

 

(iv) 65 mm to 80 mm

Set

108.00

 

(v) 100 mm

Set

113.00

18.

Drilling and tapping C.I. main.

 

 

 

(i) Upto 15 mm

Set

160.00

 

(ii) Above 15 mm upto 25 mm

Set

200.00

 

(iii) Above 25 mm

Set

239.00

19.

Plugging up C.I. main with necessary materials & Labour Complete

Set

200.00

20.

Renewing copper plated gas cock C.P. or oxidised (approved brand, wall/ b6e nmcmh /t y1p0e m).m/ 15 mm

 

 

 

(i) One way

Each

167.00

 

(ii) Two way

Each

177.00

 

(iii) Three way

Each

221.00

 

(iv) Four way

Each

270.00

21.

Renewing special make up piece of pipe having threads on both sides.

 

 

 

(i) 15 mm

Each

52.00

 

(ii) 20 mm

Each

57.00

 

(iii) 25 mm

Each

61.00

 

(iv) 32 mm

Each

65.00

 

(v) 40 mm

Each

74.00

 

(vi) 50 mm

Each

76.00

22.

Dismantling upto 100 mm sluice valve by parts and cutting out worn out bolts and reassembling the same after regrinding valve,rewashering flanges, asbestos diamond packing including studs,bolts, nuts and necessary repairs.

Each Set

445.00

SECTION (A) - PLUMBING WORKS

(A)-(III) CPVC PIPE WORKS AND FITTINGS

Item No.

Description of Item

All Districts of West Bengal

Unit

(Rs.)

 

(a) Original Works

 

 

1.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.

 

 

 

(a) For Exposed Work

 

 

 

(i) CPVC Pipes Class-I, SDR –II Dia

 

 

 

(i) 15 mm

Mtr

106.00

 

(ii) 20 mm

Mtr

143.00

 

(iii) 25 mm

Mtr

208.00

 

(iv) 32 mm

Mtr

283.000

 

(v) 40 mm

Mtr

403.00

 

(vi) 50 mm

Mtr

658.00

 

(i) CPVC Pipes Class-2, SDR –13.5  Dia

 

 

 

(i) 15 mm

Mtr

93.00

 

(ii) 20 mm

Mtr

133.00

 

(iii) 25 mm

Mtr

180.00

 

(iv) 32 mm

Mtr

265.00

 

(v) 40 mm

Mtr

368.00

 

(vi) 50 mm

Mtr

585.00

 

(b) For Concealed Work

 

 

 

(i) CPVC Pipes Class-1, SDR – 11  Dia

 

 

 

(i) 15 mm

Mtr

14.00

 

(ii) 20 mm

Mtr

171.00

 

(iii) 25 mm

Mtr

235.00

 

(i) CPVC Pipes Class-2, SDR –13.5  Dia

 

 

 

(i) 15 mm

Mtr

127.00

 

(ii) 20 mm

Mtr

160.00

 

(iii) 25 mm

Mtr

207.00

 

(a) Original Works

 

 

2.

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes

& fittings conforming to IS-15778: 2007

 

 

 

(A) (I) CPVC Pipes Class-I, SDR –11 Dia

 

 

 

(i) 15 mm

Mtr

71.00

 

(ii) 20 mm

Mtr

104.00

 

(iii) 25 mm

Mtr

161.00

 

(iv) 32 mm

Mtr

228.00

 

(v) 40 mm

Mtr

325.00

 

(vi) 50 mm

Mtr

554.00

 

(A)(II) CPVC Pipes Class-2,SDR-13.5

 

 

 

(i) 15 mm

Mtr

59.00

 

(ii) 20 mm

Mtr

94.00

 

(iii) 25 mm

Mtr

136.00

 

(iv) 32 mm

Mtr

212.00

 

(v) 40 mm

Mtr

294.00

 

(vi) 50 mm

Mtr

489.00

 

(B) Socker Dia

 

 

 

(i) 15 mm

Each

8.00

 

(ii) 20 mm

Each

11.00

 

(iii) 25 mm

Each

20.00

 

(iv) 32 mm

Each

34.00

 

(v) 40 mm

Each

61.00

 

(vi) 50 mm

Each

147.00

 

(C) Equal Tee Dia

 

 

 

(i) 15 mm

Each

12.00

 

(ii) 20 mm

Each

21.00

 

(iii) 25 mm

Each

39.00

 

(iv) 32 mm

Each

57.00

 

(v) 40 mm

Each

90.00

 

(vi) 50 mm

Each

303.00

 

(D) Reducing Socker

 

 

 

20mm X 15mm

Each

12.00

 

25 mm X20 mm

Each

17.00

 

25 mm X 15mm

Each

20.00

 

(a) Original Works

 

 

 

(E) Reducing Elbow Size

 

 

 

20mm X 15mm

Each

16.00

 

25 mm X20 mm

each

19.00

 

(F) Reducing Bush Size

 

 

 

20mm X 15mm

Each

7.00

 

25 mm X20 mm

Each

15.00

 

25 mm X15 mm

Each

19.00

 

32mm X15 mm

Each

25.00

 

32mm X20 mm

Each

27.00

 

32mm X25mm

Each

21.00

 

40 mm X15 mm

Each

38.00

 

40 mm X20mm

Each

31.00

 

40 mm X25mm

Each

44.00

 

40 mm X32 mm

Each

31.00

 

50 mm X15 mm

Each

91.00

 

50 mm X20mm

Each

83.00

 

50 mm X25mm

Each

100.00

 

50 mm X32mm

Each

94.00

 

50 mm X40mm

Each

83.00

 

(G) End Cap

 

 

 

(i) 15 mm

Each

6.00

 

(ii) 20 mm

Each

9.00

 

(iii) 25 mm

Each

14.00

 

(iv) 32 mm

Each

26.00

 

(v) 40 mm

Each

40.00

 

(vi) 50 mm

Each

80.00

 

(H) Step over bend

 

 

 

(i) 15 mm

Each

35.00

 

(ii) 20 mm

Each

38.00

 

(iii) 25 mm

Each

82.00

 

(I) Tank connecting nipple

 

 

 

(ii) 20 mm

Each

 

 

(iii) 25 mm

Each

 

 

(iv) 32 mm

Each

 

 

(v) 40 mm

Each

 

 

(vi) 50 mm

Each

 

 

(J) Male threaded adopter

 

 

 

(i) 15 mm

Each

11.00

 

(ii) 20 mm

Each

15.00

 

(iii) 25 mm

Each

25.00

 

(iv) 32 mm

Each

52.00

 

(v) 40 mm

Each

60.00

 

(vi) 50 mm

Each

119.00

 

Size

 

 

 

20mmX15mm

Each

16.00

 

(K) Elbow 90o Dia

 

 

 

(i) 15 mm

Each

10.00

 

(ii) 20 mm

Each

15.00

 

(iii) 25 mm

Each

29.00

 

(iv) 32 mm

Each

43.00

 

(v) 40 mm

Each

76.00

 

(vi) 50 mm

Each

221.00

 

(L) Elbow (45°) Dia

 

 

 

(i) 15 mm

Each

9.00

 

(ii) 20 mm

Each

27.00

 

(iii) 25 mm

Each

51.00

 

(iv) 32 mm

Each

53.00

 

(v) 40 mm

Each

84.00

 

(vi) 50 mm

Each

190.00

 

(M) Cross Tee (Dia)

 

 

 

(i) 15 mm

Each

18.00

 

(ii) 20 mm

Each

22.00

 

(iii) 25 mm

Each

51.00

 

(iv) 32 mm

Each

92.00

 

(v) 40 mm

Each

147.00

 

(vi) 50 mm

Each

314.00

 

(N) Union (Dia)

 

 

 

(i) 15 mm

Each

43.00

 

(ii) 20 mm

Each

84.00

 

(iii) 25 mm

Each

121.00

 

(iv) 32 mm

Each

149.00

 

(v) 40 mm

Each

202.00

 

(vi) 50 mm

Each

363.00

 

(O) Reducing Tee (Size)

 

 

 

15 mm x 15mm x20mm

Each

32.00

 

20mm x 15mm x15mm

Each

29.00

 

20mm x 15mm x20mm

Each

29.00

 

20 mm x 20 mm x15mm

Each

21.00

 

25 mm x 25mm x20mm

Each

35.00

 

25 mm x 20mm x20mm

Each

59.00

 

25 mm x 25mm x15mm

Each

36.00

 

40 mm x 40mm x25mm

Each

106.00

 

(P) Pipe Clip (Dia)

 

 

 

(i) 15 mm

Each

5.00

 

(ii) 20 mm

Each

4.00

 

(iii) 25 mm

Each

5.00

 

(iv) 32 mm

Each

8.00

 

(v) 40 mm

Each

14.00

 

(vi) 50 mm

Each

20.00

 

(Q)  Ball Value (Dia)

 

 

 

(i) 15 mm

Each

99.00

 

(ii) 20 mm

Each

152.00

 

(iii) 25 mm

Each

239.00

 

(iv) 32 mm

Each

399.00

 

(v) 40 mm

Each

553.00

 

(vi) 50 mm

Each

1128.00

 

(R) Female threaded adopter (Dia)

 

 

 

(i) 15 mm

Each

11.00

 

(ii) 20 mm

Each

19.00

 

(iii) 25 mm

Each

26.00

 

(iv) 32 mm

Each

47.00

 

(v) 40 mm

Each

65.00

 

(vi) 50 mm

Each

137.00

 

Size

 

 

 

20mmX15mm

Each

18.00

 

(S) Strong Plug  (Dia)

 

 

 

(i) 15 mm

Each

15.00

 

(ii) 20 mm

Each

26.00

 

(T) GIS to CTS transition Bush (Size)

 

 

 

20mm GIS to 20 mm CTS

Each

10.00

 

25 mm GIS to 25 mm CTS

Each

15.00

 

(U) Male threaded adopter

 

 

 

(i) 15 mm

Each

104.00

 

(ii) 20 mm

Each

118.00

 

(iii) 25 mm

Each

251.00

 

(iv) 32 mm

Each

433.00

 

(v) 40 mm

Each

585.00

 

(vi) 50 mm

Each

1093.00

 

Size

 

 

 

20 mm X 15 mm

Each

78.00

 

25 mm X 15 mm

Each

80.00

 

(V) Female threaded adopter

 

 

 

(i) 15 mm

Each

101.00

 

(ii) 20 mm

Each

81.00

 

(iii) 25 mm

Each

292.00

 

(iv) 32 mm

Each

525.00

 

(v) 40 mm

Each

612.00

 

(vi) 50 mm

Each

947.00

 

Size

 

 

 

20 mm X 15 mm

Each

58.00

 

25 mm X 15 mm

Each

67.00

 

(W) Female Elbow (Brass threaded) (Dia)

 

 

 

(i) 15 mm

Each

65.00

 

(ii) 20 mm

Each

81.00

 

Size

 

 

 

20mmX15mm

Each

55.00

 

20mmX15mm

Each

70.00

 

(X) Male Elbow  (Brass threaded )(Dia)

 

 

 

(i) 15 mm

Each

74.00

 

(ii) 20 mm

Each

115.00

 

Size

 

 

 

20mmX15mm

Each

70.00

 

20mmX15mm

Each

84.00

 

(Y) female Tee Brass Threaded Dia

 

 

 

(i) 15 mm

Each

74.00

 

Size

 

 

 

20 mm X 15 mm

Each

61.00

 

25 mm X 15 mm

Each

83.00

 

(Z) Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings.

(As per ASTM D 2467, Schedule 80) Dia

 

 

 

(i) 15 mm

Each

208.00

 

(ii) 20 mm

Each

217.00

 

(iii) 25 mm

Each

293.00

 

(iv) 32 mm

Each

607.00

 

(v) 40 mm

Each

705.00

 

(vi) 50 mm

Each

965.00

SECTION (A) - PLUMBING WORKS

(A)-(IV) CISTERN, G.I. TANKS WITH PARTS

Item No.

Description of Item

All Districts of West Bengal

Unit

(Rs)

 

(a) Original Works

 

 

1

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings

 

 

 

White

Each

2297.00

2.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Each

1015.00

3.

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make without fittings and brackets.

 

 

 

White

Each

1367.00

 

For item 1 & 3 above for using coloured Porcelain :-

N.B. Cisterns the rate will enhanced over the  corresponding item of white Porcelain cistern as follows.

 

 

 

(a) Sky blue, Venetian, Min. green, Turquoise, Citrus yellow , Champage, Saphire - By 50%

 

 

 

(b) Roman brown, Fern green, Misty lilac, Orange, Sienna gold, Silver grey, Sepia, Alpine, Cornil sorvinto blue - 100%

 

 

 

(c) Burgandy, Emerald green coloured - 200%

 

 

4.

Supplying, fitting and fixing concealed cistern of approved make with flash plate Cute/Loop/Shell/Nova (Code No. concealo- H(80mm Body sap code 508179 of Hindware or equivalent).

 

 

 

Matt/Gloss

Nos

7440.00

5.

Supplying G.I. tank with Galvanised iron sheet with 450 mm dia C.I. raised approved type locking cover and 50 mm cleaning flange and plug.

 

 

 

(a) With 2 mm thick G.I. sheet

 

 

 

(i) 1812 litre capacity

Each

16075.00

 

(ii) 1364 litre capacity

Each

14556.00

 

b) With 1.6 mm thick G.I. sheet

 

 

 

(i) 908 litre capacity

Each

8997.0

 

(ii) 540 litre capacity

Each

8670.00

6.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer

 

 

 

(a) 500 litre capacity

Each

2584.00

 

(b) 1000 litre capacity

Each

5128.00

 

(c) 1500 litre capacity

Each

7840.00

 

d) 2000 litre capacity

Each

10434.00

 

(e) 2500 litre capacity

Each

13027.00

 

(f) 3000 litre capacity

Each

15635.00

 

(g) 4000 litre capacity

Each

20821.00

 

(h) 5000 litre capacity

Each

27046.00

7.

Supplying, fitting and fixing cast iron raised rain proof tank cover 450mm.

Each

1014.00

8

Supplying, fitting and fixing cast iron raised rain proof tank cover 500 mm dia. with locking arrangements (weighing not less than 12 kg).

Each

1263.00

9.

Hoisting G.I. tank (upto and including 1812 litre capacity).

 

 

 

(a) 1st story from G.L.

Each

438.00

 

(b) Extra for each additional story

Each

144.00

10.

Labour for hoisting plastic water storage tank.

 

 

 

(i) Upto 1500 litre capacity.

 

 

 

(a) Upto 1st story from G.L.

Each

96.00

 

(b) Extra for each additional story

Each

43.00

 

(ii) Above 1500 litre upto 5000 litre capacity.

 

 

 

(a) Upto 1st story from G.L.

Each

154.00

 

(b) Extra for each additional story

Each

72.00

11.

Lowering G.I. tank (upto and including 1812 litre capacity).

 

 

 

(a) From 1st story to G.L.

Each

312.00

 

(b) Extra for each additional story

Each

95.00

12.

Labour for lowering plastic water storage tank and stacking in places as directed.

 

 

 

(i) Upto 1500 litre capacity.

Each

58.00

 

(a) From 1st story to G.L.

Each

29.00

 

(b) Extra for each additional story

 

 

 

(ii) Above 1500 litre upto 5000 litre capacity.

 

 

 

(a) From 1st story to G.L.

Each

95.00

 

(b) Extra for each additional story

Each

43.00

13.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Each

19.00

14

Providing and fixing concealed cistern of size 380 mm long, 400 mm wide, 100 mm thick alongwith flush plate and flush pipe with minimum distances

of 37 mm from wall face with concealed fittings arrangement of approved quality with all fittings and fixtures complete, including cutting and making good the walls wherever required. (Model: Cento of Hindware or similar brand.) [Note: This work should not be executed without specific permission of Superintending Engineer.]

Each

5604.00

 

(b) Repair Works

 

 

1.

Supplying, fitting and fixing low-down cistern parts.

 

 

 

(i) Internal fittings for cistern complete of approved make.

Each set

284.00

 

(ii) Outlet Assembly

Each

279.00

 

(iii) Intlet Assembly

Each

64.00

 

iv) Rubber Kid

Each

304.00

 

(v) Knob

Each

304.00

 

(vi) Brackets (pair)

Each

304.00

 

(vii) CP Flush Bend (local) best quality

 

 

 

a) Orrisa & Indian Pattern WC

Each

286.00

 

b) E. W.C. & Anglo-Indian W.C.

Each

272.00

2.

Renewing bolts and nuts for cistern.

Each set

40.00

3.

Renewing brass screws in auto cistern.

Each set

32.00

4.

Changing the lather only of syphon of automatic cistern including taking out and refixing necessary parts.

Each set

39.00

5.

Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:

 

 

 

(i) 32 mm

Each

165.00

 

(ii) 25 mm

Each

120.00

 

(iii) 20 mm

Each

86.00

 

(iv) 15 mm

Each

71.00

6.

Renewing polythene ball of approved quality for pipe of dia.:

 

 

 

(i) 32 mm

Each

132.00

 

(ii) 25 mm

Each

96.00

 

(iii) 20 mm

Each

76.00

 

(iv) 15 mm

Each

43.00

7.

Dismantling G.I. tank including disconnecting pipe connection.

Each

115.00

8.

Fixing G.I. tank in position including refitting pipe connection.

Each

115.00

9.

Dewatering and repairing G.I. tank above 1000 litre and upto 2000 litre capacity with G.I. washer, bolts, nuts and cement concrete at bottom as necessary.

Each

277.00

10.

Dewatering and repairing G.I. tank upto 1000 litre capacity with G.I. washer, bolts and nuts and washer.

Each

208.00

11.

Punching holes in tank(G.I.).

Each

38.00

12.

Cleaning and removing mud upto 2000 litre Water Tank including masonry reservoir.

Each

110.00

13.

Cleaning and removing mud above 2000 litre Water Tank including masonry reservoir.

Cum

67.00

14.

Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.

Each

155.00

15.

Cleaning and disinfecting above 2000 litre Water Tank including masonry reservoir.

Cum

88.00

16.

Repairing damaged G.I. tank of any capacity after lowering on roof by replacing with new 2 mm thick G.I. sheet by rivetting with necessary packing, painting new portions, refixing the existing C.I. tank cover by rivetting in new position, if necessary, after taking out old cover very carefully etc. complete (excluding the cost of dismantling and refixing tank

but including the cost of cutting out worn out portion by suitable means to regular shape). (Payment will be made on the basis of area of damaged portion replaced.)

Sq.m

1791.00

SECTION (A) - PLUMBING WORKS

(A)-(V) BASIN AND SINKS WITH PARTS

Item No.

Description of Item

All Districts of West Bengal

Unit

(Rs)

 

(a) Original Works

 

 

1.

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.

 

 

 

(i) 450 mm X 300 mm size

Each

1155.00

 

(ii) 550 mm X 400 mm size

Each

1383.00

 

(iii) 630 mm X 450 mm size

Each

2435.00

 

(iv) Angle back wash basin 400 mm X 400 mm

Each

1210.00

 

(v) Surgeon's wash basin 650 mm X 450 mm

Each

3862.00

 

(vi) Spitton for Dental Surgeon

Each

2636.00

2.

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.

 

 

 

(i) 450 mm X 300 mm size

Each

1979.00

 

(ii) 550 mm X 400 mm size

Each

2208.00

 

(iii) 630 mm X 450 mm size

Each

3260.00

 

(iv) Angle back wash basin 400 mm X 400 mm

Each

2034.00

3.

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

 

 

4.

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint

 

 

 

(i) 600 mm X 450 mm X 200 mm

Each

826.00

 

(ii) 600 mm X 450 mm X 250 mm

Each

846.00

 

(iii) 750 mm X 450 mm X 250 mm

Each

1026.00

5

Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.

 

 

 

(a) Plain edge sink with overflow

 

 

 

(i) 610 mm X 450 mm X 200 mm

Each

4933.00

 

(ii) 610 mm X 450 mm X 250 mm

Each

5445.00

 

(b) Laboratory sink with rim and overflow

 

 

 

(i) 450 mm X 300 mm X 150 mm

Each

2381.00

 

(ii) 500 mm X 300 mm X 150 mm

Each

3442.00

 

(c) Laboratory table sink including cutting of laboratory table as required.

450 mm X 300 mm X 150 mm

Each

2262.00

 

N.B. For using coloured Basin, Sink, Pedestal etc. th rates of the corresponding rates of white viterous porcelain colour will be enhanced by as followes:

 

 

 

(a) Sky blue, Venetian, Min. green, Turquoise, Citrus yellow , Champage, Saphire - By 50%

 

 

 

(b) Roman brown, Fern green, Misty lilac, Orange, Sienna gold, Silver grey, Sepia, Alpine, Cornil sorvinto blue - 100%

 

 

 

(c) Burgandy, Emerald green coloured - 200%

 

 

6.

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.

 

 

 

(a) Sink only

 

 

 

(i) 530 mm X 430 mm x 180 mm

Each

3285.00

 

(ii) 630 mm X 550 mm X 180 mm

Each

3788.00

 

(b) Sink with drain board 1050 mm X 450 mm X 180 mm

Each

5006.00

7.

Supplying, fitting and fixing of Fire clay Kitchen Sink with overflow conforming to IS: 771 with waste fittings and C.I. Brackets.(White Colour)

 

 

 

(i) 750 mm X 450 m X 250 mm

Each

5023.00

 

(ii) 600mm X 400 mm X 250 mm

Each

3722.00

 

(iii) 600 mm X 450 mm X 200 mm

Each

3641.00

8

Supplying, fitting and fixing Drain boards for sinks with brackets in position.

 

 

 

(a) Porcelain fluted drain board of approved make

 

 

 

(i) 530 mm X 450 mm

Each

1728.00

9.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.

 

 

 

(i) 300 mm long

Each

57.00

 

(ii) 450 mm long

Each

82.00

 

(iii) 600 mm long

Each

107.00

 

(iv) 750 mm long

Each

117.00

 

(v) 900 mm long

Each

147.00

10.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps

 

 

 

(i) 600 mm long

Each

47.00

 

(ii) 750 mm long

Each

59.00

 

(iii) 900 mm long

Each

75.00

 

(iv) 1050 mm long

Each

91.00

11.

Supplying, fitting and fixing C.P. chain and stay with rubber plug.

 

 

 

(i) 25 mm dia. of plug

Each set

45.00

 

(ii) 32 mm dia of plug

Each set

50.00

 

(iii) 40 mm dia of plug

Each set

55.00

 

(iv) 45 mm dia.of plug

Each set

62.00

 

(v) 50 mm dia. of plug

Each set

65.00