RATES FOR MATERIALS



STATEMENT OFRATES FOR MATERIALS

Sl No DESCRIPTION OF MATERIALS UNIT RATE
1 2 3 4
I. CONSTRUCTION MATERIALS 
1 Acetylene gas cum 404.00
2  Acid resisting mortar mix kg 60.00
3 Acid resisting tiles  Dozen 224.00
4  Acrylic emulsion paint  ltr 236.00
5  Aluminium beading for glass fixing  Rm 32.00
6  Anti-corrosive bituminuous black paint   ltr 125.00
7  Asphalt 80 / 100 and 85 / 25 Grade  kg 39.00
8  Bentonite  tonne 7336.00
9  Binding wire  kg 57.00
10  Bolts / Nuts / Washers ( galvanized general purpose ) kg 90.00
11 Bolts / Nuts / Washers ( hot dipped galvanized ) kg 108.00
12  Bolts / Nuts / Washers ( MS general purpose ) kg 90.00
13  Bolts / Nuts / Washers ( stainless steel ) kg 182.00
14  Burnt bricks  1000 Nos 5723.00
15  Burnt stone slab 100 mm thick sqm 387.00
16  Cast iron blocks  kg 54.00
17  Cement 43 Gr  tonne 5560.00
18 Cement concrete solid bricks 40 x 20 x 20 cm  Each 39.00
19  Coal tar epoxy paint   ltr 226.00
20 Coarse aggregate 10-4.75 mm  cum 1615.00
21  Coarse aggregate 20-10 mm  cum 1325.00
22  Coarse aggregate 40-20 mm  cum 1015.00
23  Coarse aggregate 80-40 mm  cum 665.00
24  Coir brush  Each 31.00
25 Copper sheet 16 SWG  kg 558.00
26 Coursed rubble stone 300 x 300 x 450 mm  Each 34.00
27  Coursed rubble stone 300 x 300 x 600 mm  Each 41.00
28 Curing Compound   ltr 144.00
29  D - cord  Rm 10.00
30  De-greasing / de-rusting compound   ltr 311.00
31  Detonating fuse coil  Rm 6.00
32  Detonator delay type  Each 12.00
33 Detonator electric  Each 6.00
34 Detonator ordinary  Each 3.00
35  Ductile iron pipe ( 18 kg / sqcm test pressure ) 100 mm dia  Rm 1080.00
36  Ductile iron pipe ( 18 kg / sqcm test pressure ) 150 mm dia  Rm 1561.00
37  Ductile iron pipe ( 18 kg / sqcm test pressure ) 200 mm dia  Rm 2245.00
38  Ductile iron pipe ( 18 kg / sqcm test pressure ) 250 mm dia  Rm 3011.00
39  Ductile iron pipe ( 18 kg / sqcm test pressure ) 300 mm dia  Rm 3805.00
40  Ductile iron pipe ( 18 kg / sqcm test pressure ) 350 mm dia  Rm 4787.00
41  Ductile iron pipe ( 18 kg / sqcm test pressure ) 400 mm dia  Rm 5735.00
42  Ductile iron pipe ( 18 kg / sqcm test pressure ) 450 mm dia  Rm 6837.00
43  Ductile iron pipe ( 18 kg / sqcm test pressure ) 500 mm dia  Rm 7945.00
44  Ductile iron pipe ( 18 kg / sqcm test pressure ) 600 mm dia  Rm 10485.00
45  Ductile iron pipe ( 18 kg / sqcm test pressure ) 700 mm dia  Rm 12021.00
46  Ductile iron pipe ( 18 kg / sqcm test pressure ) 900 mm dia  Rm 18106.00
47  Ductile iron pipe ( 18 kg / sqcm test pressure ) 1100 mm dia  Rm 26594.00
48  Ductile iron pipe ( 18 kg / sqcm test pressure ) 1000 mm dia  Rm 21486.00
49  Ductile iron pipe ( 18 kg / sqcm test pressure ) 1200 mm dia  Rm 34538.00
50  Ductile iron pipe ( 18 kg / sqcm test pressure ) 800 mm dia  Rm 14524.00
51  Empty cement bag  Each 3.00
52 Explosive ANFO kg 44.00
53 Explosive ANFO high strength booster kg 60.00
54 Explosive small dia ( Kelvex-220 or equivalent ) kg 52.00
55 Fine aggregate / sand  ( unscreened ) cum 815.00
56 Fine aggregate / sand ( screened ) cum 1000.00
57 Manufactured Sand (M-Sand) cum 1486.00
58 Geo-textile ( filter fabric ) 200 gsm sqm 225.00
59 Geo-textile ( filter fabric ) 250 gsm sqm 258.00
60 G.I barbed wire 12 x 12 gauge kg 86.00
61 G.I chain link mesh 10 gauge 50 x 50 mm opening sqm 255.00
62 G I Pipe 15 mm dia A class Rm 116.00
63 G I pipe 25 mm dia A class Rm 176.00
64 G I pipe 40 mm dia B class Rm 265.00
65 G I pipe 50 mm dia A class Rm 292.00
66 G I Pipe 80 mm dia B Class Rm 492.00
67 G I Pipe 100 mm dia B Class Rm 747.00
68 G.I sheet ( corrugated ) Class-II 1 mm thick tonne 66539.00
69 G.I sheet ( plain ) Class-II 1 mm thick tonne 62337.00
70 G.I Stretcher wire kg 83.00
71 Hariyali turfing sods sqm 30.00
72 Hectometre stone one line dressed Each 275.00
73 Hemp yarn kg 94.00
74 Honne wood planks cum 60140.00
75 Hume pipe with collar 150 mm dia Rm 356.00
76 Hume pipe with collar 300 mm dia Rm 733.00
77 Ironite compound kg 26.00
78 J- Bolts 300 mm long Each 41.00
79 Jungle wood planks cum 35068.00
80 Kilometre stone one line dressed Each 596.00
81 LDPE sheet 500 micron thick sqm 121.00
82 LDPE sheet 750 micron thick sqm 178.00
83 LDPE sheet 1000 micron thick sqm 236.00
84 M.S pipe 200 / 300 mm dia kg 63.00
85 M.S pipe 32 mm dia Rm 208.00
86 Murum / Gravel cum 215.00
87 Oxalic acid ltr 95.00
88 Oxygen gas cum 84.00
89 Plain glass 4 mm thick sqm 451.00
90 Pre-stressed concrete pipe ( 18 kg / sqcm test pressure ) 1000 mm dia Rm 6600.00
91 Pre-stressed concrete pipe ( 18 kg / sqcm test pressure ) 1200 mm dia Rm 7973.00
92 Pre-stressed concrete pipe ( 18 kg / sqcm test pressure ) 800 mm dia Rm 5537.00
93 PVC sealing strip Rm 48.00
94 PVC water stopper 310 mm wide ( central bulb type ) Rm 243.00
95 Rapid wire mesh 50 x 50 mm opening non-galvanized sqm 164.00
96 Reinforcement steel tonne 49031.00
97 Resin bond Cement capsule Each 73.00
98 Rivets kg 95.00
99 Rolling shutter sqm 2281.00
100 Rolling shutter top cover Rm 540.00
101 Rough stone 200 x 200 x 750 mm Each 22.00
102 Rubber bottom seal for gate ( flat type ) Rm 219.00
103 Rubber corner seal for gate ( music note type teflon claded ) Rm 1158.00
104 Rubber corner seal for gate ( music note type uncladed ) Rm 441.00
105 Rubber side seal for gates ( music note  type teflon claded ) Rm 1049.00
106 Rubber side seal for gate ( music note type uncladed ) Rm 368.00
107 Rubber side seal for gate (  Z type ) Rm 411.00
108 Size stone 150 to 200 mm height Each 14.00
109 Size stone 200 to 250 mm height Each 15.00
110 Size stone 250 to 300 mm height Each 19.00
111 Shahabad stone slab sqm 288.00
112 Shalimastic sealing compound kg 131.00
113 Stainless steel plate / flats kg 231.00
114 Steel door ( frame and Shutter tubular sections ) sqm 6192.00
115 Steel door ( frame CRCA sheet Shutter tubular sections ) sqm 5093.00
116 Steel window ( tubular frame and tubular section shutter excluding glass) sqm 2860.00
117 Steel window ( tubular frame and Z section shutter excluding glass) sqm 2247.00
118 Stone chips ( Excavated material at work site) cum 435.00
119 Stone chips ( at quarry ) cum 570.00
120 Structural steel angle / channel / beam / bars tonne 39547.00
121 Structural steel plate / flats tonne 39547.00
122 Super Plasticizer ( Conplast RP-264 or equivalent ) ltr 111.00
123 Synthetic Enamel paint 1st quality ltr 233.00
124 Tarfelt joint filler board 12 mm thick sqm 353.00
125 Tarfelt joint filler board 20 mm thick sqm 556.00
126 Through stones 200 x 200 x 300 to 450 mm long Each 19.00
127 Through stones 250 x 250 x 450 to 600 mm long Each 24.00
128 Through stones 300 x 300 x 650 to 750 mm long Each 31.00
129  Un-coursed rubble stones( Excavated material at work site)  cum  360.00
130  Un-coursed rubble stones ( at quarry   cum  460.00
131  Water proof cement paint  kg 52.00
132  Water proofing compound  kg 52.00
133 Welding electrodes 4 mm dia ( general purpose )  Each 10.00
134  Welding electrodes 4 mm dia ( radiographic low hydrogen )  Each 21.00
135 Welding electrodes 4 mm dia ( stainless steel ) Each 62.00
136  Weld mess 100 x 50 mm 10 gauge non-galvanized  sqm 242.00
137  Wire brush  Each 53.00
138  Weld mesh 50 x 50 mm 13 gauge  sqm 229.00
139  Wire mesh 20 gauge ( 50 mm x 50 mm chain link ) sqm 241.00
140 Zinc kg 139.00
141  Zinc chromate red oxide primer paint  ltr  139.00
142  Zinc rich epoxy primer paint ( zinc content - 90 % ) ltr  244.00
143 Ground Granualated Blast Furnance Slag (GGBS) MT 3500.00
II. MANUFACTURED MATERIALS FOR GATES / HOISTS :
1  Cast steel Wheel / Pulley / Hub / Plummer / Roller  kg 155.00
2  Cast steel Drum / Gear  kg 190.00
3  Cast steel Pinion  kg 190.00
4  Forged steel Hook / Shackle  kg 210.00
5  Alloy steel Shaft ( Corbon steel ) kg 280.00
6  Alloy steel Pin ( Stainless steel ) kg 345.00
7  Bronze-alluminium alloy Bearing / Bush  kg 810.00
III. ACCESSORIES FOR MACHINERY / EQUIPMENT :
1  Air hose 25 mm dia  Rm 204.00
2  Air hose 50 mm dia  Rm 276.00
3 Cardium compound  kg 102.00
4 Casing shoe bit  Each  10720.00
5 Diamond core bit BX size  Each  12239.00
6 Diamond core bit NX size  Each  15512.00
7  Diesel  ltr 69.00
8 Double tube core barrel Each  12212.00
9  Electric power ( HT - 2B category ) Kwhr 8.24
10  Extension rod with coupling sleeve  Rm 4271.00
11 Gear oil HP-90 ltr 234.00
12 Grease GEM-RR3 kg 233.00
13  Jack hammer drill rod 1.5 m Each  4054.00
14  Jack hammer drill rod 2.5 m Each  6723.00
15  Lubricant ltr 238.00
16 Nozzle for guniting / sand blasting gun Each 381.00
17 Nylon conveyor belt 3 ply 600 mm width Rm 2417.00
18 Nylon conveyor belt 3 ply 1000 mm width Rm 3776.00
19 Paving cylinder Each 23619.00
20 Petrol ltr 77.67
21 Rails tonne 47458.00
22 Reamer shell Each 5251.00
23 Shutter oil ltr 33.00
24 Spinning belt Each 10791.00
25 T.C cross bit 100 mm dia Each 12422.00
26 T.C cross bit 50 mm dia Each 4506.00
27 T.C cross bit 75 mm dia Each 9940.00
28 Tyre and tube set for truck Set 16019.00
29 Water hose ( pressure hose ) Rm 188.00
30 Wire rope ( conforming to IS-2266 ) kg 163.00

NOTES : 

1 The rates provided for materials are exclusive of G.S.T .
2 The rates provided for materials are inclusive of royalty charges wherever applicable.
3 The rates provided for materials, except those for which conveyance charges are admissible as per the statement of conveyance charges, are for all leads
4 The rates provided for useful rubble and stone chips from excavation are at dump yard.
5 The width and length of Size stone shall not be less than 1.5 times the height.
6 Manufactured Sand shall conform to IS-383-2007 . Further Indian Institute of Science, Bangalore, have conducted tests on use of Manufactured Sand in cement mortars and has concluded that it shall conform to IS- 2116 (Reaffirmed-1998). In this regard the guildlines in circular issued by the Government vide Circular No: PW/72/BMS/2013 dated:31.07.2013 & circular No: PW/518/BMS/2014 dated:30.09.2014,shall be followed.

*****