REINFORCED CEMENT CONCRETE



BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)
Code
No.
Description Unit Rate
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 0 day 800.00
0004 Production cost of concrete by batch mix plant cum 350.00 cum 350.00
0009 Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
cum 210.00
0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0012 Vibrator (Needle type 40 mm) day 370.00
0025 Hire and running charges of light crane day 3000.00
0026 Hire and running charges of bentonite pump day 3500.00
0029 Carriage of concrete by transit mixer km/cum 30.00
0052 Front end loader 1 cum bucket capacity (incl POL) hour 900.00
0066 Batching and Mixing Plant @ 75 cum per hour hour 2400.00
0070 Generator 100 KVA/125 KVA hour 250.00
0082 Excavation of Diaphragm wall by Mechanical Grab sqm 1300.00
0101 Bhisti day 617.00
0102 Blacksmith 1st class day 738.00
0103 Blacksmith 2nd class day 679.00
0112 Carpenter 2nd class day 679.00
0114 Beldar day 558.00
0115 Coolie day 558.00
0116 Fitter (grade 1) day 738.00
0123 Mason (brick layer) 1st class day 738.00
0124 Mason (brick layer) 2nd class day 679.00
0126 Mason (for ornamental stone work) 1st class day 738.00
0128 Mate day 617.00
0131 Painter day 679.00
0155 Mason (average) day 709.00
0236 Multi purpose fibre (high impact poly propelene reinforced)
cement board 6 mm thick
sqm 210.00
0242 6mm thick multipurpose cement bonded wood particle boardconforming to IS : 14276quality tonne 34000.000314 Bitumen hot sealing compound : grade A kg 28.00 BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)SUB HEAD sqm 195.00
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 1300.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0302 Safeda ballies 125 mm diameter metre 40.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality
tonne 34000.0
0314 Bitumen hot sealing compound : grade A kg 28.00
0316  Bitumen solution primer of approved quality litre 45.00
0339 Flame retardant face insulating, Impregnated fibre board 12 mmthick sqm 375.00
0349 Curing compound litre 38.00
0367 Portland Cement (OPC-43 Grade) tonne 4940.00
0370 Coal (steam)  quintal 440.00
0596 Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm 10 Nos 56.00
0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 36.00
0768 Cement Concrete Jali 50 mm thick sqm 400.00
0769 Cement Concrete Jali 40 mm thick sqm 350.00
0770 Cement Concrete Jali 25 mm thick sqm 275.00
0967 Copper plate kg 527.00
0982 Coarse sand (zone III) cum 1350.00
0983 Fine sand (zone IV) cum 900.00
0992 Galvanised steel plain sheets quintal 5000.00
1004 Average rate of Mild steel round bars for reinforcement quintal 4500.00
1005 Twisted steel/ deformed TMT bars Fe-500D quintal 4600.00
1015 Mild steel expanded metal 20x60 mm strands 3.25 mm wide1.60 mm thick sqm 280.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight notless than 7.75 kg/sqm sqm 430.00
1034 Bolts and nuts up to 300 mm in length quintal 4800.00
1197 Second class kail wood in scantling 10 cudm 260.00
1198 Second class kail wood in planks 10 cudm 260.00
1215 Welding by electric plant cm 2.00
1224 Hard drawn steel wire quintal 4800.00
1225 Mild steel flat strap fitting quintal 4120.00
1980 Fly ash cum 10.00
2200 Carriage of Steam coal tonne 120.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2204 Carriage of Timber cum 118.59
2205 Carriage of Steel tonne 92.24
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 112.79
2209 Carriage of Cement tonne 92.24
2211 Carriage of Tar / Bitumen tonne 103.77
2261 Carriage of Fine sand (1 Part badarpur sand : 2 Parts Jamuna sand) cum 103.77
2262 Carriage of Flyash cum 103.77
2273 Carriage of A.C.sheet and accessories tonne 92.24
2302 Carriage of G.I. sheet and accessories tonne 92.24
2391 Strips-Aluminium fluted 3.15 mm thick and 150 mm wide metre 278.00
2392 Strips Aluminium fluted 3.15 mm thick and 200 mm wide metre 370.00
2393 1 mm thick Stainless Steel Cover plate grade 304 kg 275.00
2394 Coupler 16 mm dia each 30.00
2395 Coupler 20 mm dia each 39.00
2396 Coupler 25 mm dia each 69.50
2397 Coupler 28 mm dia each 80.00
2398 Coupler 32 mm dia each 110.00
2399 Complete Roof Joint of 100 mm metre 2800.00
2400 Complete Roof Joint of 150 mm metre 3200.00
2401 Complete Roof Joint of 200 mm metre 4000.00
2402 Epoxy adhesive kg 150.00
2403 Floor Joint of 100 mm metre 3100.00
2404 Floor Joint of 150 mm metre 4000.00
2405 Floor Joint of 200 mm metre 5400.00
2409 Wall Joint of 100 mm metre 2400.00
2410 Wall Joint of 150 mm metre 2800.00
2411 Wall Joint of 200 mm metre 3400.00
2447 Hollock ballies 125 mm diameter metre 35.00
7183 Bentonite of 35 kg per pile tonne 2960.00
7318 Plasticizer / super plasticizer kg 36.00
7319 Wall form panel 1250x500 mm each 860.00
7320 Tie bolt 12 mm dia 100 mm length each 38.00
7321 Tie bolt 12 mm dia 150 mm length each 48.00
7322 Tie bolt 20 mm dia 150 mm length each 57.00
7323 Tie bolt 20 mm dia 225 mm length each 67.00
7324 Spring coil 12 mm each 15.00
7325 Plastic cone 12 mm dia each 17.00
7326 Corner angle 45x45x5 mm 1.50 m long each 240.00
7327 100 mm channel shoulder 2.5 m long each 910.00
7328 Double clip (bridge clip) each 76.00
7329 Single clip each 59.00
7330 M.S. tube 40 mm dia metre 215.00
7331 Wall form panel 1250x450 mm each 860.00
7332 Corner angle 45x45x5 mm 2.50 m long each 255.00
7333 Column clamp 450x1070 mm each 965.00
7334 Prop 2 m ( 2-3.5 m) each 635.00
7342 Adjustable span ESO+SI (2.35-3.40) each 1480.00
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each 955.00
7344 Beam clamp 300-380 mm (450-1070 mm) each set 355.00
7345 Prop 4 m e each 910.00
7346 Double coupler each 46.00
8647 Stainless steel screws 30 mm x4 mm 100 Nos 32.00
8659 Water proof ply 12 mm thick sqm 517.00
8953 Micro Silica kg 32.00
8954 Stop end tubes for diaphragmwall 600 mm dia. sqm 4.50
8955 Driving end tubes for diaphragm wall 600 mm dia. sqm 72.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00
5.0 REINFORCED CEMENT CONCRETE
Code
No.
Description Unit Rate
CAST IN SITU
5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :    
  5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) cum 7718.25
  5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) cum 7296.35
5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :    
  5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) cum 9306.00
5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). cum 9763.80
5.4 Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). cum 8962.70
5.5 Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). cum 10289.00
5.6 Reinforced cement concrete work in chimneys, shafts, up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3
graded stone aggregate 20 mm nominal size).
cum 9500.10
5.7 Reinforced cement concrete work in well-steining, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). cum 7270.30
5.8 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size). cum 8550.25

*****