REPAIRS TO BUILDING



BASIC RATES (SH: 14.0 REPAIRS TO BUILDING)
Code
No.
Description Unit Rate
0006 Hire charges of Spraying machine including electric charges day 250.00
0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0058 Air compressor hour 200.00
0085 Using cost of Ultra Violet Radiation tube Hour 189.00
0086 Compressor, gun, rubber pipes & other accessories- hire charge of plant & machinery i/c necessary fuel day 4000.00
0087 Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL and operator day 36000.00
0100 Bandhani day 617.00
0101 Bhisti day 617.00
0102 Blacksmith 1st class day 738.00
0103 Blacksmith 2nd class day 679.00
0111 Carpenter 1st class day 738.00
0112 Carpenter 2nd class day 679.00
0114 Beldar day 558.00
0115 Coolie day 558.00
0116 Fitter (grade 1) day 738.00
0117 Assistant Fitter or 2nd class Fitter day 679.00
0119 Glazier day 679.00
0123 Mason (brick layer) 1st class day 738.00
0124 Mason (brick layer) 2nd class day 679.00
0126 Mason (for ornamental stone work) 1st class day 738.00
0128 Mate day 617.00
0129 Sewer man day 558.00
0130 Mistry day 738.00
0131 Painter day 679.00
0138 Sprayer (for bitumen, tar etc.) day 617.00
0139 Skilled Beldar (for floor rubbing etc.) day 617.00
0141 White Washer day 617.00
0155 Mason (average) day 709.00
0156 Carpenter (average) day 709.00
0159 Skilled torch operator for laying tack day 738.00
0160 Technician day 775.00
0164 Security guard without gun (8 hours shift duty per day) day 617.00
0165 Security guard with gun (8 hours shift duty per day) day 679.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1350.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1350.00
0302 Safeda ballies 125 mm diameter metre 40.00
0308 Bhusa quintal 500.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 34000.00
0316 Bitumen solution primer of approved quality litre 45.00
0367 Portland Cement (OPC-43 Grade) tonne 4940.00
0370 Coal (stream) quintal 440.00
0389 Brass single acting spring hinges 150 mm each 425.00
0390 Brass single acting spring hinges 125 mm each 285.00
0391 Brass single acting spring hinges 100 mm each 250.00
0392 Brass double acting spring hinges 150 mm each 480.00
0393 Brass double acting spring hinges 125 mm each 400.00
0394 Brass double acting spring hinges 100 mm each 390.00
0404 Brass flush bolt 250 mm each 150.00
0405 Brass flush bolt 150 mm each 130.00
0406 Brass flush bolt 100 mm each 90.00
0417 Brass 150 mm floor door stopper weighing not less than 0.357kg each 160.00
0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 600.00
0419 Brass hard drawn hooks and eyes 250 mm 10 Nos 574.00
0420 Brass hard drawn hooks and eyes 200 mm 10 Nos 510.00
0421 Brass hard drawn hooks and eyes 150 mm 10 Nos 400.00
0422 Brass hard drawn hooks and eyes 100 mm 10 Nos 345.00
0423 Brass casement window fastener each 45.00
0427 Brass quadrant stays 300 mm each 110.00
0428  Brass fanlight catch 10 Nos 170.00
0429 Brass fanlight pivot 10 Nos 168.00
0430 Brass chain with hook for fan light catch each 36.00
0442 Brass helical spring 150 mm each 290.00
0444 Brass curtain rod 20 mm dia 1.25 mm thick metre 140.00
0445 Brass curtain rod 25 mm dia 1.25 mm thick - metre 190.00
0446 Brass brackets (curtain rods) 20 mm each 45.00
0449 Brass screws 50 mm 100 Nos 220.00
0452 Brass screws 25 mm 100 Nos 100.00
0524 Chromium plated Brass butt hinges (heavy) type 75x65x 4 mm weighing not less than 200gms 10 Nos 905.00
0525 Chromium plated Brass butt hinges (light/ordinary) type 125x70x4mm 10 Nos 805.00
0526 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm 10 Nos 690.00
0527 Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm 10 Nos 421.00
0528 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm 10 Nos 180.00
0585 Chromium plated Brass screws 50 mm 100 Nos 300.00
0586 Chromium plated Brass screws 40 mm 100 Nos 290.00
0587 Chromium plated Brass screws 30 mm 100 Nos 240.00
0589 Chromium plated Brass screws 20 mm 100 Nos 160.00
0595 Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 10 Nos 80.00
0597 Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm 10 Nos 49.00
0608 Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide metre 39.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00    
0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 36.00
0640 Bright finished or black enameled mild steel screws 20 mm 100 Nos 30.00
0761 Fuel wood quintal 500.00
0771 Kerosene oil litre 50.00
0772 White cement based polymer modified self curing compound in powder form kg 15.00
0775 Dehradun white lime quintal 600.00
0811 Mud (dry) cum 165.00
0815 Dry distemper kg 30.00
0816 Ist quality Acrylic distemper(Ready mix) having VOC content less than 50 grams/ litre kg 50.00
0826 Aluminium paint litre 150.00
0827 Acid proof paint (chocolate or black) litre 225.00
0828 Anticorrosive bituminous paint (black) litre 100.00
0829 Black Japan paint litre 90.00
0833 Synthetic enamel paint in black or chocolate shade litre 170.00
0835 Plastic acrylic emulsion paint litre 200.00
0845 Roofing paint for iron sheets in red colour litre 120.00
0851 Water proofing cement paint kg 38.00
0855 Wax polish (ready made) kg 230.00
0856 Ordinary varnish litre 100.00
0857 Superior copal varnish litre 115.00
0858 Superior spar varnish litre 115.00
0859 Oil type wood preservative litre 130.00
0863 Putty for wood work kg 30.00
0982 Coarse sand (zone III) cum 1350.00
0999 Shellac kg 300.00
1000 Spirit litre 48.00
1003 Mild steel round bar above 12 mm dia quintal 4400.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4600.00
1008 Flats up to 10 mm in thickness quintal 4500.00
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 120.00
1034 Bolts and nuts up to 300 mm in length quintal 4800.00
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 225.00
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar in planks 10 cudm 1100.00
1188 First class teak wood in planks 10 cudm 850.00
1189 Second class teak wood in scantling 10 cudm 776.00
1190 Second class teak wood in planks 10 cudm 791.00
1194 Second class deodar wood in planks 10 cudm 500.00
1196 First class kail wood in planks 10cudm 300.00
1199 Sal wood in scantling 10 cudm 600.00
1208 Bitumen washer 100 Nos 30.00
1209 G.I. plain washer thick 100 Nos 35.00
1213 Water proofing materials kilogram 35.00
1215 Welding by electric plant cm 2.00
1241 Commercial LPG in Cylinder kg 82.00
1301 Bleaching powder quintal 1800.00
1314 C.P.brass chain with 32 mm dia rubber plug each 40.00
1315 C.P.brass chain with 40 mm dia rubber plug each 40.00
880 Dismenteled P or S trap scrap (approx wt 2kg) kg 22.00
1890 Centrifugally SCI(spun) S & S P or S trap each 300.00
1953 Vitreous china Indian type W.C. pan of size 580 mm each 450.00
1954 Vitreous china orrisa type W.C. pan of size 580 mm each 1200.00
1970 Vitreous china foot rests 250x125x25 mm pair 100.00 2200 Carriage of steam coal tonne 120.00
2201 Carriage of Bricks 1000 Nos 276.72
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2204 Carriage of Timber cum 118.59
2205 Carriage of Steel tonne 92.24
2209 Carriage of Cement tonne 92.24
2211 Carriage of Tar/ Bitumen tonne 103.77
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 92.24
2264 Carriage of Rubbish cum 103.77
2406 Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) sqm 300.00
2407 Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) sqm 500.00
2466 Hollock wood in scantling 10 cudm 350.00
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete each 165.00
2602 Common burnt clay F.P.S. (non modular) bricks class designation 1000 Nos 4500.00 4009 Mild steel tubes hot finished welded type kg 57.00
4202 Red oxide Zinc chromate primer litre 110.00
4203 Copper acetate kg 285.00
7019 Dash fastener / Chemical fastener each 14.00
7241 Melamine polish litre 280.00
7346 Double coupler each 46.00
7387 Spigot for standard jointing kg 43.00
7397 Base Jack each 145.00
7398 Challies each 765.00
7399 Cup locks each 48.00
7442 Wheel 75 mm dia. 40 mm wide each 62.00
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 840.00
8200 A.P.P. modified polymeric felt (two layers) 1.5mm thick sqm 80.00
8201 A.P.P. modified polymeric felt (two layers) 2mm thick sqm 100.00
8203 A.P.P. modified 2 mm thick membrane reinforced with glass fibre malt sqm 126.67
8204 A.P.P. modified 3 mm thick membrane reinforced with glass fible matt sqm 190.00
8205 A.P.P. modified 3 mm thick membrane with polyester matt sqm 205.00
8206 Bitumen primer for bitumen membrane litre 80.00
8207 Geotextile 120 grams per sqm membrane sqm 45.00
8500 Water for jetting / blowback 1000 litre 1500.00
8505 Acrylic exterior paint litre 170.00
8506 Premium Acrylic exterior paint litre 180.00
8507 Textured exterior paint litre 240.00
8508 Primer for cement paint litre 79.00    
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00
  14.0 REPAIRS TO BUILDING    
14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.    
  14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 417.80
  14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 429.60
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge    
  14.2.1 Door chowkhats each 1366.85
  14.2.2 Window chowkhats each 858.90
  14.2.3 Clerestory window chowkhats each 637.85
14.3 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. each 193.95
14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.    
  14.4.1 For door/ window/ clerestory window sqm 932.45
14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:    
  14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) sqm 890.50
  14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) sqm 1184.85
14.6 Renewing glass panes, with wooden fillets wherever necessary:    
  14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) sqm 1263.00
  14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) sqm 1557.35
14.7 Renewing glass panes and refixing existing wooden fillets:    
  14.7.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) sqm 989.85
  14.7.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) sqm 1284.20
14.8 Supplying and fixing new wooden fillets wherever necessary:    
  14.8.1 2nd class teak wood fillets metre 61.50
  14.8.2 Hollock wood fillets metre 54.70
14.9 Renewal of old putty of glass panes (length) metre 42.60
14.10 Refixing old glass panes with putty and nails sqm 554.05
14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets) sqm 510.75
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. each 425.10
14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. sqm 521.60
14.14 Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary repairs and cement pointing with same mortar complete, including disposal of rubbish to dumping ground, all complete as per direction of Engineer-in-Charge.    
  14.14.1 Red/ white sand stone slabs 30 to 50 mm thick sqm 957.70    
14.15 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.    
  14.15.1 Sal wood battens cum 91114.45
14.16 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.    
  14.16.1 Not exceeding 4.00 metres in length    
  14.16.1.1 Sal wood beams cum 95325.80
  14.16.1.2 Hollock wood beams cum 60859.95
14.16.2 Above 4.00 metres and upto 5.00 metres length.    
  14.16.2.1 Sal wood beams cum 97267.00
  14.16.2.2 Hollock wood beams cum 62765.35
  14.17 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. sqm 51.70
14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :    
  14.18.1 With F.P.S. brick tiles sqm 103.45
  14.18.2 With modular brick tiles sqm 104.65
14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. kg 4.00
14.20 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. metre 102.60
14.21 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. kg 224.60
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete.    
  14.22.1 Wheel 50 mm dia and below per wheel 146.75
  14.22.2 Wheel above 50 mm dia per wheel 240.45
EARTH WORK
14.23 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. kilo litre 169.05
14.24 Mud mortar made with local clay good earth. cum 737.00
BRICK WORK
14.25 Brick work with common burnt clay bricks of class designation 7.5 in mud mortar cum 5281.35
WOOD WORK
14.26 Providing and fixing 25 mm thick shutters for cup board etc. :    
14.26.1 Panelled or panelled & glazed shutters :    
  14.26.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 4456.60
  14.26.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3852.70
14.26.2 Glazed shutters :    
  14.26.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 4448.45
  14.26.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm 3798.05
14.27 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with :    
  14.27.1 Second class teak wood sqm 4069.70
14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.    
  14.28.1 20 mm diameter. metre 292.90
  14.28.2 25 mm diameter. metre 359.80
14.29 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. kg 92.05 14.30 Providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with :    
  14.30.1 Sal wood cum  90056.65
  14.30.2 Hollock wood cum 55939.25
14.31 Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :    
  14.31.1 150 mm each 647.55
  14.31.2 125 mm each 460.25
  14.31.3 100 mm each 408.10
14.32 Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete :    
  14.32.1 150 mm each 721.15
  14.32.2 125 mm each 614.10
  14.32.3 100 mm each 595.40
14.33 Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete :    
  14.33.1 250 mm each 229.45
  14.33.2 150 mm each 199.50
  14.33.3 100 mm each 145.95
14.34 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete each 232.5
14.35 Providing and fixing bright finished brass hard drawn hooks and eyes :    
  14.35.1 300 mm  each 86.45
  14.35.2 250 mm each 82.95
  14.35.3 200 mm each 74.40
  14.35.4 150 mm each 59.70
  14.35.5 100 mm each 52.35
14.36 Providing and fixing bright finished brass fan light pivot with necessary brass screws etc. complete. each 39.70
  14.37 Providing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary brass screws etc. complete. each 63.65
14.38 Providing and fixing bright finished brass quadrant stay 300 mm long with necessary brass screws etc. complete. each 162.65 14.39 Providing and fixing bright finished brass helical door spring (superior quality). each 457.90
14.39 Providing and fixing bright finished brass helical door spring (superior quality). each 457.90
14.40 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.    
  14.40.1 125x70x4 mm (ordinary type) each 170.10
  14.40.2 100x70x4 mm (ordinary type) each 145.60
  14.40.3 75x65x4 mm (heavy type) each 162.15
  14.40.4 75x40x2.5 mm (ordinary type) each 97.35
  14.40.5 50x40x2.5 mm (ordinary type) each 40.80
14.41 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. each 245.20
FINISHING
14.42 Item Shifted to Sub Head 13 as item 13.87    
14.43 Item Shifted to Sub Head 13 as item 13.88    
14.44 Item Shifted to Sub Head 13 as item 13.89    
14.45 Item Shifted to Sub Head 13 as item 13.90    
14.46 Item Shifted to Sub Head 13 as item 13.91    
14.47 Item Shifted to Sub Head 13 as item 13.92    
14.48 Item Shifted to Sub Head 13 as item 13.93    
14.49 Item Shifted to Sub Head 13 as item 13.94    
14.50 Item Shifted to Sub Head 13 as item 13.95    
14.51 Item Shifted to Sub Head 13 as item 13.96    
14.52 Item Shifted to Sub Head 13 as item 13.97    
14.53 Item Shifted to Sub Head 13 as item 13.98    
14.54 Item Shifted to Sub Head 13 as item 13.99    
14.55 Item Shifted to Sub Head 13 as item 13.100    
14.56 Item Shifted to Sub Head 13 as item 13.101    
14.57 Item Shifted to Sub Head 13 as item 13.102    
14.58 Item Shifted to Sub Head 13 as item 13.103    
14.59 Item Shifted to Sub Head 13 as item 13.104    
14.60 Item Shifted to Sub Head 13 as item 13.105    
14.61 Item Shifted to Sub Head 13 as item 13.106    
14.62 Item Shifted to Sub Head 13 as item 13.107    
14.63 Item Shifted to Sub Head 13 as item 13.108    
14.64 Item Shifted to Sub Head 13 as item 13.109    
14.65 Item Shifted to Sub Head 13 as item 13.110    
14.66 Item Shifted to Sub Head 13 as item 13.111    
14.67 Item Shifted to Sub Head 13 as item 13.112    
14.69 Item Shifted to Sub Head 13 as item 13.113    
14.70 Item Shifted to Sub Head 13 as item 13.114    
14.71 Item Shifted to Sub Head 13 as item 13.115    
14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm 257.95
  Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.    
14.73 Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete. kg 473.90
14.74 Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine screws etc. complete. each 57.30
14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. sqm 512.00
ROUTINE MAINTENANCE WORK
14.75A A Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paintand if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) litre 0.35
14.76 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. each 77.65
14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm metre 256.90
14.7  Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. sqm 63.70
14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. each 317.75
14.80 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.    
  14.80.1 Long pattern W.C Pan of size 580x440 mm each 2724.10
  14.80.2 Orissa pattern W.C Pan of size 580x440 mm each 3537.80
14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. each 220.40
14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. each 96.00
14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. sqm 2.50
14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge.
(a) Internal Work- Exposed on wall
metre 2.70
14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. each 297.85
14.86 Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). sqm 592.65
14.87 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). sqm 408.75
14.88 Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymericmix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). sqm 651.50
14.89 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrane , black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.    
  14.89.1 2mm (for corrugated roof sheets) sqm 419.75
14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :    
  14.90.1 3 mm thick sqm 512.95
14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :    
  14.91.1 3 mm thick sqm 535.00
14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. sqm 99.75
  Note: Item no 14.86 to 14.92 are brought from Sub Head 22 i.e. Water Proofing, Item no 22.15 to 22.21    
14.93 Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour’s shift including necessary T&P like torch, lathi and uniform etc.complete,as per the direction of Engineer-in-charge.(One job means 8 hour’s duty). each job 732.55
14.94 Providing round the clock security guard with gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour’s shift including necessary T&P like torch, lathi and uniform etc.complete, as per the direction of Engineer-in-charge.(One job means 8 hour’s duty). each job 803.85
  Note: Item no 14.93 & 14.94 are brought from Sub Head 26 i.e. New Technologies and Materials, Item no 26.20 & 26.21    

*****