AMENDMENTS



Amendment in Haryana Building Code, 2017
PUBLIC NOTICE

(For the purpose of inviting objections/suggestions)

Certain  amendments  in  Chapter-4  &  6  of  the  Haryana  Building Code,  2017  as  per  the  attached  annexure  have  been  approved  by  the Government.   While   hosting   on   the   website   of   the   Department,   the suggestions/objections on the said amendments are invited from the general public and all stake holders. These may be forwarded through Email to the following within a period of 30 days of the issuance of this public notice i.e. upto 30.03.2019:-

1.  DTCP, Haryana, Chandigarh : tcpharyana7@gmail.com.

2.   Architect, HQ : architect.hqhs.tcp@gmail.com.

Dated:- 01.03.2019
Place:- Chandigarh

-Sd/-
(K. Makrand Pandurang, IAS) Director,
Town and Country Planning, Haryana, Chandigarh

Draft Amendments in Chapter 4 and 6 of the Haryana Building Code-2017.  

1. Amendments in Chapter-4.

(a) Code 4.10 (3) (i) shall be substituted as under: “(i).

(a) For residential plots, minimum 25% of the total permissible ground coverage, shall be essential to be constructed to obtain occupation certificate, wherein one habitable room, a kitchen and a toilet forming part of submitted building plan is completed.

(b) For Inland Container Depot (ICD) minimum area for considering approval  of grant of occupation certificate shall be 2.5% of the permissible ground  coverage.

(c) For other buildings, the minimum area norm for grant of occupation   certificate shall be as under:-   

Sr.
No.
Area of site Minimum area required for approval of building plan and grant of occupation certificate.
1 Upto 1 acre 25%   of   permitted   coverage   on   all   floors   i.e.   total
permissible FAR.
2. Above   1   acre   and
upto 5 acres
20%   of   permitted   coverage   on   all   floors   i.e.   total permissible FAR.
3. Above  5  acres  and
upto 10 acres
15%   of   permitted   coverage   on   all   floors   i.e.   total permissible FAR.
4. Above 10 acres 10%   of   permitted   coverage   on   all   floors   i.e.   total
permissible FAR.

Note:- The area to be constructed in all types of cases under category (i) (a), (b) and (c) above can be achieved either at ground floor or at subsequent floors.” 

(b).   After Code 4.10 (6), the following Code 4.10 (7) shall be added as under: 
“4.10 (7). The cases where building plans have been approved under Punjab Scheduled Roads & Controlled Areas Restriction of Unregulated Development Rules, 1965 i.e. prior to implementation of Building Code, and their applications for Occupation Certificates are being considered now as per Building Code, 2017, in such cases building plans should be considered as deemed approved as per the provisions of Haryana Building Code, 2017, subject to payment of composition charges”. 

2. Amendment in Chapter 6 (a) Code 6.3 (2)(i) :- 

The Maximum permissible Ground Coverage, Permissible basement, Maximum permissible Floor Area Ratio (FAR), Maximum permissible Height [G+3 Floor (including stilt (S+4))(in metres)] in Residential Plots of Core Areas shall be substituted as under:- 
Sr

Sr.
No.
Plot area slabs Maximum permissible Ground Coverage Permissible basement Maximum permissible Floor     Area Ratio (FAR) Maximum permissible   Height (G+3              Floor) (including stilt (S+4
Floor)) (in metres)
1. Upto  60  square metres 85% Single Level 220% 15.0 or with prior
approval of Fire Office upto 16.5
2. Above   60      to
150         square metres
80% Single Level 200% 15.0 or with prior
approval of Fire Office upto 16.5
3. Above    150    to
225         square metres
70% Single Level 180% 15.0 or with prior
approval of Fire Office upto 16.5
4. Above    225    to
450         square metres
60% Single Level 160% 15.0 or with prior
approval of Fire Office upto 16.5
5. Above          450
square metres
50% Single Level 140% 15.0 or with prior
approval of Fire Office upto 16.5

(b) Code 6.3 (3)(i)(a): - 

The Maximum permissible Ground Coverage, Permissible basement, Maximum permissible Floor Area Ratio (FAR), Maximum permissible Height [G+3 Floor (including stilt (S+4))(in metres)] in Residential Plotted for Areas other than Core areas shall be substituted as under:- 

Sr.
No.
Plot area slabs Maximum permissible Ground Coverage Permissible Basement Maximum permissible Floor     Area Ratio (FAR) Maximum permissible Height         (G+3 Floor)  (including
stilt  (S+4  Floor)) (in metres)
1. Upto 100 square metres 66% Single Level 165% 15.0 or with prior
approval of Fire Office upto 16.5
2. Above    100    to
250         square metres
66% Single Level 145% 15.0 or with prior approval of Fire
Office upto 16.5
3. Above    250    to
350         square metres
60% Single Level 130% 15.0 or with prior approval of Fire
Office upto 16.5
4. Above    350    to
500         square metres
60% Single Level 120% 15.0 or with prior approval of Fire
Office upto 16.5
5. Above    500    to
1000        square metres
60% Single Level 100% 15.0 or with prior approval of Fire
Office upto 16.5

(c) Code 6.3 (3) (iv) Sr. No. 2:  The Maximum Ground Coverage, Permissible Basements, Maximum permissible Floor Area Ratio, Maximum Permissible Height at 6.3 (3) (iv) Sr. No. 2 relating to Apparel and Footwear shall be substituted as under: 

Sr.
No.
Type              of
Industry
Maximum ground coverage Permissible basement Maximum permissible Floor  Area
Ratio
Maximum Permissible Height Remarks
2. Apparel        and Footwear 60% Unrestricted 250% Unrestricted To be located on  roads  with a    Right    Of Way    of    15
meters      and above

*****