Sanitary and Drainage

SECTION (B) - SANITARY AND DRAINAGE WORKS (A)-(I)

(B)-(I) HYDRANT AND ALLIED WORKS

Item No	Description of Item	All Districts West Bengal
Item No	Description of Item	Unit	(Rs.)
	(a) Original Works
1.	Supplying, fitting and fixing ground hydrant of approved make
	(i) 20 mm	Each	966.00
	(ii) 25 mm	Each	1395.00
	(iii) 32 mm	Each	2777.00
	(iv) 40 mm	Each	3836.00
2.	Supplying, fitting and fixing street pattern hydrant 65 mm with guaranteed spindles and C.I.cover complete.	Each	4011.00
3.	Supplying, fitting and fixing C.I. cover for street pattern hydrant.	Each	815.00
4.	Supplying, fitting and fixing fire hydrant of approved make.
	(i) 20 mm	Each	956.00
	(ii) 25 mm	Each	1365.00
	(iii) 32 mm	Each	2828.00
	(iv) 40 mm	Each	3926.00
	(b) Repair Works
1.	Dismantling and refixing 65 mm street hydrant.	Each	64.00
2.	Renewing C.I. square head of street hydrant.	Each	127.00
3.	Renewing leather washer of street hydrant.
	(i) 50 mm	Each	59.00
	(ii) 45 mm	Each	56.00
4.	Renewing 150 mm X 150 mm grey rubber washer for flange of street hydrant.		45.00
5.	Supplying, fitting and fixing spindle (G.M.) nipple for hydrants to make house union 25 mm to 40 mm size.	Each	235.00
6.	Regrinding valve seat of street hydrant	Each	114.00
7.	Renewing brass jumper of street hydrant.	Each	114.00
8.	Dismantling garden hydrant and refixing the same after repair including regrinding seat 40 mm and above.	Each	14.00
9.	Dismantling fire hydrant after plugging off the supply for repairs and refixing the same including taking to workshop and back.	Each	338.00
10.	Renewing bolt and nut for hydrant.	Each	12.00
11.	Renewing spindle of hydrant
	(i) 15 mm	Each	72.00
	(ii) 20 mm	Each	81.00
	(iii) 25 mm	Each	92.00
	(iv) 32 mm	Each	131.00
	(v) 50 mm	Each	243.00
	(vi) 75 mm	Each	470.00
12.	Renewing pin for hydrant.	Each	26.00
13.	Renewing 65 mm bridge guage.	Each	267.00
14.	Renewing cap for 65 mm bridge guage.	Each	133.00
15.	Renewing brickets for hydrant.	Each	123.00
16.	Renewing English rubber seat.
	(i) 80 mm dia. 10 mm thick	Each	31.00
	(ii) 125 mm dia. 6 mm thick	Each	32.00

SECTION (B) - SANITARY AND DRAINAGE WORKS

B)-(II) SOIL PIPE AND FITTINGS

Item No.	Description of Item	All Districts of West Bengal
Item No.	Description of Item	Unit	Rs.
	(a) Original Works
1.	Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).
	(a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.
	(i) 150 mm dia. (internal)	Metre	1373.00
	(ii) 100 mm dia. (internal)	Metre	688.00
	(iii) 75 mm dia. (internal)	Metre	571.00
	(iv) 50 mm dia. (internal)	Metre	447.00
	(b) With lead caulked joints.
	(i) 150 mm dia. (internal)	Metre	1469.00
	(ii) 100 mm dia. (internal)	Metre	751.00
	(iii) 75 mm dia. (internal)	Metre	617.00
	(iv) 50 mm dia. (internal)	Metre	490.00
2.	Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/2002 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	1539.00
	(ii) 100 mm dia.	Each	794.00
	(iii) 75 mm dia.	Each	543.00
	(iv) 50 mm dia.	Each	476.00
	(b) With lead caulked joints
	(i) 150 mm dia.	Each	1727.00
	(ii) 100 mm dia.	Each	905.00
	(iii) 75 mm dia.	Each	622.00
	(iv) 50 mm dia.	Each	510.00
3.	Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	1803.00
	(ii) 100 mm dia.	Each	916.00
	(iii) 75 mm dia.	Each	709.00
	(iv) 50 mm dia.	Each	634.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	2074.00
	(ii) 100 mm dia.	Each	1069.00
	(iii) 75 mm dia.	Each	818.00
	(iv) 50 mm dia.	Each	699.00
	N.B. For single or double junction without door, the rates for items 2 & 3 will be reduced by Rs. 50.00.
4.	Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	862.00
	(ii) 100 mm dia.	Each	543.00
	(iii) 75 mm dia.	Each	421.00
	(iv) 50 mm dia.	Each	372.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	1040.00
	(ii) 100 mm dia.	Each	66.00
	(iii) 75 mm dia.	Each	505.00
	(iv) 50 mm dia.	Each	420.00
5.	Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	890.00
	(ii) 100 mm dia.	Each	496.00
	(iii) 75 mm dia.	Each	410.00
	(iv) 50 mm dia.	Each	320.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	1068.00
	(ii) 100 mm dia.	Each	600.00
	(iii) 75 mm dia.	Each	494.00
	(iv) 50 mm dia.	Each	369.00
6.	Supplying, fitting & fixing H.C.I. heel rest bend conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	996.00
	(ii) 100 mm dia.	Each	550.00
	(iii) 75 mm dia.	Each	435.00
	(iv) 50 mm dia.	Each	395.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	1167.00
	(ii) 100 mm dia.	Each	649.00
	(iii) 75 mm dia.	Each	544.00
	(iv) 50 mm dia.	Each	455.00
7.	(A) Supplying, fitting & fixing H.C.I. offset conforming to I.S.S. including jointing complete with or without ear (75 mm projection) and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	846.00
	(ii) 100 mm dia.	Each	619.00
	(iii) 75 mm dia.	Each	443.00
	(iv) 50 mm dia.	Each	350.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	1023.00
	(ii) 100 mm dia.	Each	722.00
	(iii) 75 mm dia.	Each	527.00
	(iv) 50 mm dia.	Each	399.00
	(B) Supplying, fitting & fixing H.C.I. offset conforming to I.S.S. including jointing complete with or without ear (150 mm projection) and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1)
	(i) 150 mm dia.	Each	1055.00
	(ii) 100 mm dia.	Each	646.00
	(iii) 75 mm dia.	Each	536.00
	(iv) 50 mm dia.	Each	443.00
	b) With lead caulked joints
	(i) 150 mm dia.	Each	1232.00
	(ii) 100 mm dia.	Each	749.00
	(iii) 75 mm dia.	Each	620.00
	(iv) 50 mm dia.	Each	491.00
8.	(a) H.C.I. bell mouth plain trap supplied, fitted and fixed with leadjointing complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).	Each	845.00
	(b) H.C.I. bell mouth plain trap supplied, fitted and fixed with valamoid joint complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
9.	Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
	(ii) 100 mm dia.	Each	367.00
	(iii) 75 mm dia.	Each	273.00
	(iv) 50 mm dia.	Each	241.00
10.	Supplying, fitting & fixing Aluminium domical grating.
	(i) 150 mm	Each	74.00
	(ii) 125 mm	Each	56.00
	(iii) 100 mm	Each	49.00
	(iv) 87.5 mm	Each	42.00
	(v) 75 mm	Each	41.00
	(vi) 50 mm	Each	38.00
11.	Supplying, fitting & fixing Cast Iron Fresh air inlet valve 100 mm and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately).	Each	171.00
12.	Supplying, fitting & fixing Cast iron inverted single junction or antisyphon all degrees conforming to I.S. 3989/2009 and 1729/ 2002 including jointing and painting two coats to the exposed surface.(Painting will however be paid separately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1) upto quarter depth.
	(i) 50 mm X 50 mm	Each	561.00
	(ii) 100 mm X 50 mm	Each	716.00
13.	Supplying, fitting & fixing Cast iron inverted double junction or antisyphon all degrees conforming to I.S. 3989/2009 and 1729 / 2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Measurement of Painting will however be paid separately).
	(a) With valamoid joints including sealing the top with cement mortar (4:1) upto quarter depth.
	i) 100 mm X 50 mm X 50 mm	Each	885.00
	(b) with lead caulked joints.
	(i) 100 mm X 50 mm X 50 mm	Each	1067.00
14.	Supplying, fitting and fixing cast iron 'P' or 'S' trap conforming to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid separately).
	(A) 'P' Trap
	(i) 50 mm	Each	507.00
	(ii) 75 mm	Each	602.00
	(iii) 100 mm	Each	948.00
	(iv) 150 mm	Each	1687.00
	(B) 'S' Trap
	(i) 50 mm	Each	675.00
	(ii) 75 mm	Each	656.00
	(iii) 100 mm	Each	803.00
	(iv) 150 mm	Each	1468.00
15.	Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/2009 and 1729/2002 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
(a)	(i) 100 mm X 150 mm	Each	461.00
	(ii) 100 mm X 225 mm	Each	511.00
	(iii) 100 mm X 300 mm	Each	555.00
	(iv) 100 mm X 375 mm	Each	586.00
	(v) 100 mm X 450 mm	Each	616.00
	(vi) 100 mm X 525 mm	Each	685.300
	(vii) 100 mm X 600 mm	Each	710.00
	(b) Extension 50 mm one way
	(i) 100 mm X 375 mm	Each	619.00
	(c) Extension 50 mm two way
	(i) 100 mm X 375 mm	each	744.00
16	Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).
	(i) 300 mm	Mtr	927.00
	(ii) 225 mm	Mtr	528.00
	(iii) 150 mm	Mtr	334.00
	(iv) 100 mm	Mtr	294.00
17.	Supplying, fitting and fixing with cement jointing (3:1) with jute gasket soaked in cement mortar.
	(a) Stoneware bend
	(i) 300 mm	Each	532.00
	(ii) 225 mm	Each	447.00
	(iii) 150 mm	Each	350.00
	(iv) 100 mm	Each	309.00
	(b) Stoneware single T or Y junction
	(i) 225 mm	Each	506.00
	(ii) 150 mm	Each	447.00
	(iii) 100 mm	Each	282.00
	(c) Stoneware double T or Y junction
	(i) 150 mm	Each	485.00
	(ii) 100 mm	Each	434.00
18.	Supplying, fitting and fixing C.I. round grating
	(i) 1000 mm	Each	62.00
	(ii) 150 mm	Each	85.00
	(iii) 225 mm	Each	119.00
19.	Supplying, fitting and fixing C.I. square jalli.
	(i) 1000 mm	Each	73.00
	(ii) 150 mm	Each	102.00
	(iii) 225 mm	Each	142.00
	(iv) 450 mm	Each	185.00
20	Supplying, fitting and fixing yard gully with approved H.C.I. grating complete.
	(i) 225 mm X 150 mm with 230 mm gratings	Each	508.00
	(ii) 150 mm X 100 mm with 150 mm gratings	Each	311.00
21.	Supplying, fitting and fixing S.W. master trap.
	(i) 150 mm X 150 mm	Each	947.00
	(ii) 225 mm X 225 mm	Each	5720.00
22.	Cast Iron fittings for soil pipe line conforming to I.S. 1729/2002 including jointing and fitting and fixing in position and painting two coats to the exposed surface complete including cost of all materials & labour.(Payment of paiting will be paid seperatly.)
	(a) Single junction of 150 mm.X 100 mm. dia with door
	i) With valamoid joint including sealing the top with cement mortar (4:1)	Each	1417.00
	(ii) With lead caulked joints	Each	1426.00
	(b) Double junction of 150 mm.dia X 100 mm.dia X 100 mm. with door
	(i) With valamoid joints including sealing the top with cement mortar (4:1)	Each	1441.00
	(ii) With lead caulked joints	Each	1629.00
	c) Double 'Y' junction of 150 mm.dia X 100 mm.dia X 100 mm.dia with door
	(i) With valamoid joints including sealing the top with cement mortar (4:1)	Each	1375.300
	(ii) With lead caulked joints	Each	1563.00
	N.B. For any junction without door the rate for above items will be reduced by Rs. 50.00
23.	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
	A) (i) Single Socketed 3 Meter Length
	(a) 75 mm	Metre	196.00
	(b) 110 mm	Metre	292.00
	(c) 160 mm	Metre	546.00
	(ii) Double Socketed 3 Meter Length
	(a) 75 mm	Metre	211.00
	(b) 110 mm	Metre	315.00
	(c) 160 mm	Metre	598.300
	(iii) Single Socketed 1.8 Meter Length
	(a) 75 mm	Metre	204.00
	(b) 110 mm	Metre	293.00
	(iv) Double Socketed 1.8 Meter Length
	(a) 75 mm	Metre	210.00
	(b) 110 mm	Metre	317.00
	(v) Double Socketed 1.2 Meter Length
	(a) 75 mm	Metre	219.00
	(b) 110 mm	Metre	322.00
	(vi) Double Socketed 0.9 Meter Length
	(a) 75 mm	Metre	226.00
	(b) 110 mm	Metre	324.00
	(vii) Double Socketed 0.60 Meter Length
	(a) 75 mm	Metre	236.00
	(b) 110 mm	Metre	337.00
	(B) Fittings
	(i) Coupler
	(a) 75 mm	Each	46.00
	(b) 110 mm	Each	85.00
	(c) 160 mm	Each	261.00
	(ii) Plain Tee
	(a) 75 mm	Each	46.00
	(b) 110 mm	Each	85.00
	(c) 160 mm	Each	262.00
	(iii) Door Tee
	(a) 75 mm	Each	101.00
	(b) 110 mm	Each	195.00
	(c) 160 mm	Each	514.00
	iv) Door Tee(LH) & (RH)
	(a) 75 mm	Each	178.00
	(b) 110 mm	Each	312.00
	v) Plain Y
	(a) 75 mm	Each	102.00
	(b) 110 mm	Each	206.00
	(c) 160 mm	Each	583.00
	vi) Door Y (LH) & (RH)
	(a) 75 mm	Each	140.00
	(b) 110 mm	Each	276.00
	vii) Double Y
	(a) 75 mm	Each	150.00
	(b) 110 mm	Each	274.00
	viii) Double Y with Door
	(a) 75 mm	Each	215.00
	(b) 110 mm	Each	345.00
	ix) Bend 45º
	(a) 75 mm	Each	54.00
	(b) 110 mm	Each	89.00
	(c) 160 mm	Each	293.00
	x) Bend 87.5º
	(a) 75 mm	Each	61.00
	(b) 110 mm	Each	120.00
	(c) 160 mm	Each	338.00
	xi) Door Bend (T.S.)
	(a) 75 mm	Each	84.00
	(b) 110 mm	Each	147.00
	(c) 160 mm	Each	369.00
	xii) Door Bend (LH) & (RH)
	(a) 75 mm	Each	125.00
	(b) 110 mm	Each	284.00
	xiii) Cross Tee
	(a) 75 mm	Each	145.00
	(b) 110 mm	Each	239.00
	xiv) Cross Tee with Door
	(a) 75 mm	Each	216.00
	(b) 110 mm	Each	239.00
	xv) Vent Cowl
	(a) 75 mm	Each	25.00
	(b) 110 mm	Each	33.00
	(c) 160 mm	Each	57.00
	xvi) Pipe Clip
	(a) 75 mm	Each	16.00
	(b) 110 mm	Each	21.00
	(c) 160 mm	Each	43.00
	xvii) W.C. Connector (150 mm long) 125 X 110(W/WC Ring)
	75 mm	Each	142.00
	xviii) W.C. Connector (450 mm long) W / lipring
	75 mm	Each	277.00
	xix) W.C. Connector Bend W / lipring
	75 mm	Each	159.00
	xx) 125/110 P Trap with W.C. Ring
	75 mm	Each	340.00
	xxi) 110 X 110 P Trap
	75 mm	Each	281.00
	xxii) 125/110 S Trap with W.C. Ring
	75 mm	Each	552.00
	xxiii) 110/110 S Trap
	75 mm	Each	434.00
	xxiv) 125/110 Q Trap with W.C. Ring
	75 mm	Each	472.00
	xxv) 110/110 Q Trap
	75 mm	Each	345.00
	xxvi) Reducer 110 X 75 mm
	75 mm	Each	80.00
	xxvii) Reducing Tee (110 X 75 mm)
	75 mm	Each	142.00
	xxviii) Reducing Tee (160 X 110 mm)
	75 mm	Each	405.00
	xxix) Passover
	(a) 75 mm	Each	285.00
	(b) 110 mm	Each	407.00
	xxx) Cleaning Pipe
	(a) 75 mm	Each	93.00
	(b) 110 mm	Each	182.00
	(c) 160 mm	Each	459.00
	xxxi) Plain Floor Trap with Top tile & Strainer
	75 mm	Each	144.00
	xxxii) Plain Floor Trap without Top tile & Strainer
	75 mm	Each	144.00
	xxxiii) Multi Floor Trap with Top tile & Strainer
	75 mm	Each	171.00
	xxxiv) Multi Floor Trap without Top tile & Strainer
	75 mm	Each	175.00
	xxxv) Socket Plug
	75 mm	Each	42.00
	110 mm	Each	54.00
	xxxvi) Reducing Door Tee 160 X 110 mm
	75 mm	396.00
	xxxvii) Reducing Door Tee 160 X 75 mm
	75 mm	Each	159.00
	xxxviii) Reducing Tee 160 X 75 mm
	75 mm	Each	364.00
	xxxix) Reducing Y 110 X 75 mm
	75 mm	Each	145.00
	xI) Branch Saddle 110 X 75 mm
	75 mm	Each	80.00
	xIi) Branch Saddle 110 X 50 mm
	75 mm	Each	75.00
	xIii) Branch Saddle 110 X 40 mm
	75 mm	Each	66.00
	xIiii) Branch Saddle 75 X 50 mm
	75 mm	Each	19.00
	xIiv) Branch Saddle 75 X 40 mm
	75 mm	Each	19.00
	xIv) Round Jali
	75 mm	Each	24.00
	xIvi) Door Cap
	(a) 75 mm	Each	37.00
	(b) 110 mm	Each	51.00
	xIvii) W.C. Ring
	110 mm	Each	124.00
	xIviii) Lip Ring
	110 mm	Each	61.00
	xIix) Door Gasket
	(a) 75 mm	Each	6.00
	(b) 110 mm	Each	8.00
	L) Rubber Ring
	(a) 75 mm	Each	14.00
	(b) 110 mm	Each	17.00
	© 160 mm	Each	30.00
	Li) Nahani Trap
	(a) 90 mm	Each	105.00
C.	Rubber Lubricant 500 ML	500 ML	187.00
D	Solvent Cement 250 ML	250 ML	103.00
24.	Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.
	(A) Above ground
	(i) 75 mm dia.	Metre	45.00
	(ii) 110 mm dia	Metre	57.00
	(iii) 160 mm dia.	Metre	66.00
	(B) Under ground
	(i) 75 mm dia.	Metre	73.00
	(ii) 110 mm dia	Metre	84.00
	(iii) 160 mm dia.	Metre	93.00
25.	Supplying, fitting & fixing Centrifugally Cast (spun) iron soil,waste water and rain water (Hubless) pipe epoxy coated inside & outside conforming to I.S. 15905 / 2011 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).
	(i) 150 mm dia. (internal)	Metre	1425.00
	(ii) 100 mm dia. (internal)	Metre	852.00
	(iii) 75 mm dia. (internal)	Metre	699.00
	(iv) 50 mm dia. (internal)	Metre	597.00
26.	Supplying, fitting & fixing Centrifugally Cast (spun) iron (Hubless) double branch equal without door conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling.
	(i) 150 mm dia..-Y 45 D	Nos	1565.00
	(i) a. 100 mm dia – Y 45 D	Nos	722.00
	(ii) b. 100 mm dia – Y 88 D	Nos	595.00
	(iii)a. 75 mm dia..-Y 45 D	Nos	391.00
	(iii)b. 75 mm dia.- Y 88 D	Nos	329.00
27.	Supplying, fitting & fixing Centrifugally Cast (spun) iron (Hubless) bend with door conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling.
	(i) 100 mm dia	Nos	430.00
	(ii) 75 mm dia	Nos	268.00
28.	Supplying, fitting & fixing Centrifugally Cast (spun) iron (Hubless) bend without door conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling
	(i)a . 150 mm dia.- 88 degree	Nos	595.00
	(i)b . 150 mm dia.- 45 degree	Nos	438.00
	(ii)a . 100 mm dia..- 88 degree	Nos	282.00
	(ii)b . 100 mm dia.- 45 degree	Nos	219.00
	(iii)a . 75 mm dia..- 88 degree	Nos	198.00
	(iii)b . 75 mm dia.- 45 degree	Nos	145.00
	(iv)a . 50 mm dia..- 88 degree	Nos	105.00
	(iv)b . 50 mm dia.- 45 degree	Nos	98.00
29.	Supplying, fitting & fixing Centrifugally Cast (spun) iron (Hubless) offset conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling.
	(A) Offset (65 mm projection)
	(i) 150 mm dia.	Nos	700.00
	(ii) 100 mm dia.	Nos	428.00
	(iii) 75 mm dia.	Nos	350.00
	(iv) 50 mm dia.	Nos	133.00
	(B) Offset (130 mm projection)
	(ii) 100 mm dia.	Nos	494.00
	(iii) 75 mm dia.	Nos	353.00
	(iv) 50 mm dia.	Nos	182.00
30.	Supplying, fitting & fixing Centrifugally Cast (spun) iron vent cowl conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling.
	(i) 150 mm dia.	Nos	673.00
	(ii) 100 mm dia.	Nos	311.00
	(iii) 75 mm dia.	Nos	238.00
31.	Supplying,fitting and fixing Centrifugally Cast (spun) iron (Hubless) 'P' trap conforming to I.S. 15905 / 2011 including all joining materials but excluding coupling and painting two coats to the exposed surface. (Coupling & Painting to be paid seperately).
	(i) 50 mm	Nos	227.00
	(ii) 75 mm	Nos	460.00
	(iii) 100 mm	Nos	631.00
	(iv) 150 mm	Nos	1245.0
33.	Supplying,fitting and fixing Centrifugally Cast (spun) iron (Hubless) composite 88 degree 'T -Y' single branch conforming to I.S. 15905 / 2011 including all joining materials but excluding couplin g. (Coupling to be paid seperately).
	(i) 50 mm	Nos	229.00
	(ii) 75 mm	Nos	457.00
	(iii) 100 mm	Nos	635.00
	(iv) 150 mm	Nos	1541.00
34.	Supplying,fitting and fixing shielded stainless steel (Grade:304) coupling with EPDM rubber gasket of appropriate size conforming to I.S. 15905 / 2011 complete as per satisfaction of Engineer-in-Charge.
	(i) 50 mm	Nos	264.00
	(ii) 75 mm	Nos	283.00
	(iii) 100 mm	Nos	310.00
	(iv) 150 mm	Nos	441.00
	(b) Repair Works
1.	Dismantling H.C.I. pipe with fittings including melting lead caulked joints.
	(i) 50 mm	Nos	50.00
	(ii) 75 mm	Nos	57.00
	(iii) 100 mm	Nos	64.00
	(iv) 150 mm	Nos	71.00
2.	Refixing H.C.I. pipe with fittings including lead caulked joints (with the old molten lead).
	(i) 50 mm	Nos	36.00
	(ii) 75 mm	Nos	54.00
3.	Melting out lead caulked joint.
	(i) 50 mm	Nos	15.00
	(ii) 75 mm	Nos	22.00
	(iii) 100 mm	Nos	26.00
	(iv) 150 mm	Nos	36.00
4.	Renewing lead caulked joints for H.C.I. pipe with new gaskets.
	(i) 150 mm (2.07 kg of lead)	Each	408.00
	(ii) 100 mm (1.25 kg of lead)	Each	261.00
	(iii) 75 mm (0.87 kg of lead)	Each	182.00
	(iv) 50 mm (0.56 kg of lead)	Each	127.00
5.	Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe.	Each	86.00
6.	Dismantling door of H.C.I. bend or junction and taking out broken nuts by drilling and refixing the same with new nuts including putty joints complete.	Each	29.00
7.	Cutting out patent stone / mosaic floor for embedding pipe and mending good all damages including concreting (4:2:1) and bringing the floor to original nature.	Metre	96.00
8.	Renewing door of H.C.I. bend or junction with new bolts and nuts including taking out.	Set	84.00
9.	Dismantling yard gully with gratings.
	(i) 100 mm	Each	35.00
	(ii) 150 mm	Each	35.00
	(iii) 225 mm	Each	53.00
	(iv) 300 mm	Each	53.00
10.	Refixing yard gully including necessary cement brick work (4:1) and 13 mm thick cement plaster (2:1) etc. complete including mending good all damages. (Cement work will be paid seperately).
	(i) 100 mm	Each	21.00
	(ii) 150 mm	Each	21.00
	(iii) 225 mm	Each	35.00
	(iv) 300 mm	Each	35.00
11.	Removing chokage of yard gully.	Each	25.00
12.	Removing chokage of H.C.I. or S.W. pipe with split bamboo.
	(a) Underground	Metre	11.00
	(b) Over ground	Metre	9.00
13.	Scraping the hard scum of 'S' trap carefully to render the flushing flow easy after soaking with strong acid through W.C. pan on floor and also cleaning through flanged junction door underneath the ceiling including necessary scafolding and resetting the flanged door watertight by putty joints by methor labour	Each	87.00

SECTION (B) - SANITARY AND DRAINAGE WORKS

(B)-(III) WATER CLOSETS AND URINALS

	(a) Original Works
1.	Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).
	(i) 580 mm long	Each	973.00
	(ii) 510 mm long	Each	900.00
	(iii) 450 mm long	Each	872.00
2.	Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc
	(a) With 'P' trap	Each	1421.00
	(b) With 'S' trap	Each	1512.00
3.	Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc
	(a) With 'P' trap (with vent)	Each	3104.00
	b) With 'S' trap (with vent)	Each	3287.00
	N.B. For W.C. with trap without vent the rate will be reduced by Rs.25.00
4.	Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
	(i) 580 mm X 440 mm	Each	1613.00
	(ii) 530 mm X 410 mm	Each	1522.00
5.	Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.)	Each	3938.00
	(This item to be executed on specific permission of Superintending Engineer)
6.	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
	(i) 635 mm X 395 mm X 420 mm	Each	2869.00
	(ii) 470 mm X 280 mm X 340 mm	Each	945.00
	(iii) Corner urinal 440 mm X 345 mm X 250 mm	Each	1167.00
7.	Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
	(i) 450 mm X 350 mm	Each	881.00
8.	Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
	(i) 600 mm X 100 mm
	a) Salt glazed stone ware	Metre	124.00
	(b) White vitreous chinaware	Metre	466.00
	(ii) 600 mm X 150 mm
	(a) Salt glazed stone ware	Metre	138.00
	(b) White vitreous chinaware	Metre	579.00
	(A) Extra for item 8(i)(b) & 8(ii)(b)
	(i) Channel with outlet, stop end	Metre	37.00
	(ii) Channel with 'L' or 'T'	Metre	192.00
9.	Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with
	(a) Artificial stone (4:2:1) with 6 mm stone chips and chequered including adding colour as necessary.	Each pair	58.00
	(b) Porcelain of approved make.	Each pair	214.00
10.	Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
	(a) E.W.C.
	i) Plastic (hallow type) black	Each	302.00
	ii) Plastic (hallow type) white	Each	380.00
	(iii) Bestolite (solid type) black	Each	535.00
	(iv) Bestolite (solid type) white	Each	715.00
	(b) Anglo Indian
	(i) Plastic (hallow type) black	Each	371.00
	(ii) Plastic (hallow type) white	Each	485.00
11.	Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.
	i) Polythene Flush Pipe	Each	155.00
	ii) C. P. Flush Pipe	Each	295.00
12.	Supplying, fitting and fixing urinal flush pipe fittings of approved brand.
	(a) C.P. urinal flush pipe fittings range of one	Each	414.00
	(b) C.P. urinal flush pipe fittings range of two	Each	917.00
	(c) C.P. urinal flush pipe fittings range of three	Each	1248.00
13.	Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.	Sqm	1426.00
14.	Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.	Each	1132.00
15.	Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
	(i) 450 mm X 300 mm	Each	367.00
	(ii) 600 mm X 450 mm	Each	484.00
16.	Supplying, fitting and fixing glass shelf with aluminium guard rails.
	(a) Ordinary type with 5.5 mm sheet glass
	(i) 450 mm X 125 mm	Each	341.00
	(ii) 600 mm X 125 mm	Each	480.00
17.	Supplying, fitting and fixing liquid soap container.
	(a) Cromium plated.	Each	393.00
	(b) PTMT(Prayag or equivalent)	Each	210.00
	c) Fibre glass	Each	188.00
	(d) Polythene	Each	98.00
18.	Supplying, fitting and fixing soap holder.
	(a) PTMT (Prayag or equivalent)	Each	135.00
	b) Fibre glass	Each	58.00
	c) Polythene	Each	50.00
19.	Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm	Each	613.00
20.	Supplying, fitting and fixing Tooth brush and Tumbler holder of approved make of size 140 mm X 65 mm (porcelain).	Each	361.00
21.	Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.	Each	223.00
22.	Supplying, fitting and fixing towel rail with two brackets.
	(a) C.P. over brass
	(i) 25 mm dia. and 450 mm long	Each	384.00
	(ii) 25 mm dia. and 600 mm long	Each	430.00
	(iii) 25 mm dia. and 750 mm long	Each	475.00
	(b) Aluminium
	(i) 25 mm dia. and 450 mm long	Each	142.00
	(ii) 25 mm dia. and 600 mm long	Each	164.00
	(iii) 25 mm dia. and 750 mm long	Each	187.00
23	Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary.
	i) Roll type size 250 mm X 125 mm	Each	293.00
	(ii) Box type size 175 mm X 150 mm	Each	338.00
	(iii) Recess roll type size 150 mm X 150 mm	Each	384.00
24.	Supplying, fitting and fixing porcelain soap tray of approved make
	(i) Recessed soap tray of size 150 mm X 150 mm	Each	338.00
25.	Supplying, fitting and fixing bathroom shelf of approved make of size 580mm X 150 mm (porcelain).	Each	613.00
	N.B. For coloured sanitary wares rates will be enhanced over the rates of corresponding items of white glazed sanitary wares as follows:
	(a) Sky blue, Venetian pink, Min. green, Turquoise, Citrus yellow, Champange, Saphire - by 50 %
	(b) Roman brown, Fern green, Misty lilac, Orange, Sienna gold, Sepia, Silver grey, Alpine, Cornil, Sorvinto Blue - by 100%
26.	Supplying, fitting & fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610x390x370 mm having pre & post flushing with water (250 ml & 350 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. (Model: Senso Art of Hindware or similar brand.) [Note: This work should not be executed without specific permission of Superintending Engineer.]
	15 mm normal bore	Each	13215.00
27.	Supplying, fitting and fixing WALL HUNG TYPE water closet (European type) size - 500x360x350 mm of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (MODEL CARAT of CERA or equivalent.)	Each	3560.00
	(This item to be executed on specific permission of Superintending Engineer)
28.	AMBULANT DISABLED TOILET
A.	Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
	(This item to be executed on specific permission of Superintending Engineer)	Each	5446.00
B.	Fittings of Ambulant Disabled Toilet
a)	Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)
	White
b)	Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.)
	White	Each	2406.00
c)	Supplying, fitting and fixing Stainless steel Wall Mounted Grab Bar. Load bearing capacity 150 kg, covered by Nylon surface with contour finish (for better grip) with Anti-bacterial surface complete. (Model Code No. B2210106 of CERA or equivalent.)
	60 mm Long	Each	1825.00
d)	Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets.(Model Code No.B2210108 of CERA or equivalent.)
	750 mm long	Each	6760.00
e)	Supplying, fitting and fixing 15 mm Twin Flush Fitting (Model Code No. B1810112 of CERA or equivalent).	Each	1041.00
f)	Supplying, fitting and fixing 15 mm Spatula Single Lever Basin Mixer (Model Code No. F9030451 of CERA or equivalent).	Each	1973.00
	(b) repair Works
1.	Foot rest for Indian pattern water closet
	(a) Dismantling	No	18.00
	(b) Refixing	No	20.00
2.	Dismantling Indian W.C. including taking out base concrete as necessary	Each	45.00
3.	Refixing Indian W.C. excluding cost of base concrete if necessary complete	Each	70.00
4.	Dismantling E.P. or Anglo-Indian W.C.	Each	45.00
5.	Refixing E.P. or Anglo-Indian W.C.	Each	88.00
6.	Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete.	Each	45.00

7.	Refixing Orissa pattern W.C. Including cost of base concrete, if necessary, complete.Payment of concrete to be paid seperatly.	Each	88.00
8.	Dismantling urinal.	Each	33.00
9.	Refixing urinal.	Each	35.00
10.	Dismantling flush pipe of water closet		17.00
11.	Refixing flush pipe of water closet.	Each	22.00
12.	Refixing flush pipe/ M.S. bend/ C.P. flush pipe with I.R. adapter.		35.00
13.	Cleaning I.P.W.C. with acid	Each	19.00
14.	Cleaning E.P. or Anglo-Indian W.C. with acid.	Each	27.00
15.	Cleaning urinal with channel with acid.	Each set	20.00
16.	Cleaning glazed tiles with acid	Sqm.	10.00
17.	Cleaning white glazed channels with acid.	Metre	10.00
18.	Cleaning and polishing marble or mosaic partition including removing stains.	Sqm	10.00
19.	Dismantling and refixing marble or mosaic partition.	Each	100.00
20.	Removing chokage of water closet	Each	26.00
21.	Removing chokage of urinal and waste trap.	Each	26.00
22.	Repairing C.P. hinges of W.C. seat.	Each	82.00
23.	Repairing W.C. seat with brass plate and screws.	Set	82.00
24.	Polishing W.C. seat.	Set	39.00
25.	Rectifying leakage of W.C. by new joints by methor mistry.	Each	39.00
26.	Renewing best quality C.P. hinges for mirror.	Set	82.00
27.	Renewing rubber buffer with brass screws.	Each	18.00

SECTION (B) - SANITARY AND DRAINAGE WORKS

(B)-(IV) INSPECTION PIT, SEPTIC TANK, SOAK PIT ETC.

Item No.	Description of Items	Rate (Rs)
Item No.	Description of Items	Unit	Kolkata / 24 Pgs (N & S) /Area of Kalyani Sub Div	Purba Bardhaman Paschim Bardhaman	Purulia	Birbhum	Howrah/ Hoogly	Purba Medinipur	Paschim Medinipur/Jhargram	Bankura	Nadia excluding area of Kalyani Sub Div	Murshidabad	Malda	Darjeeling, Kalimpong except plains of Siliguri Sub Divn.	Jalpaiguri,Alipurduar, plains of Siliguri Sub Divn. & Area of Haldibari PS	Coochbehar excluding the area of Haldibari PS	Uttar/ Dakshin Dinajpur Dist.	REMARKS
	(a) Original Works
1	Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
	i) With Pakur variety. (SAIL/TATA/RINL)	Each	7303	6738	6360	6207	7080	6987	7077	6538	6888	6882	6691	-	-	-	-
	ii) With Bazree (N.B Variety) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	7930	6476	6497	6655
	i) With Pakur variety (Other than SAIL/TATA/RINL).	Each	7149	6584	6206	6054	6926	6834	6923	6384	6734	6728	6533	-	-	-	-
	ii) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	7771	6318	6339	6497
	iii) Extra for each additional depth of 150mm orpart thereo beyond initial 600 mm depth.	Each	1515	1092	986	986	1342	1238	1134	1020	1299	1264	1234	1873	1199	1199	1303
2.	ConstructingInspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. mastertrap,constructing masonry invert with cementconcrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only).
	(i) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master.
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	11859	11043	10543	10279	11515	11361	11531	10770	11250	11247	10905	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	12271	10391	10412	10609
	A)WithPakurvariety.(OtherthanSAIL/TATA/RINL)	Each	11822	11006	10506	10242	11478	11324	11494	10733	11213	11210	10866	-	-	-	-
	B)WithBazree(N.BVarity)(OtherthanSAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	12232	10352	10373	10570
	(ii) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 100 mm dia. of approved make
	A)WithPakurvariety.(SAIL/TATA/RINL)	Each	11325	10509	10009	9746	10982	10827	10997	10236	10716	10713	10371	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	11640	9760	9782	9978
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	11288	10472	9972	9709	10945	10790	10960	10199	10679	10676	10332	-	-	-	-
	B)WithBazree(N.BVarity)(OtherthanSAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	11601	9722	9743	9940
	(iii) 1050 mm X 750 mm (inside) chamber including fitting and fixing S.W. mastetrap of 225 mm dia. of approved make
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	12131	11237	10698	10391	11744	11575	11781	10944	11462	11463	11061	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	12938	10639	10681	10691
	A)WithPakurvariety.(OtherthanSAIL/TATA/RINL)	Each	12092	11197	10659	10351	11705	11535	11742	10905	11423	11020	-	-	-	-	-
	B)WithBazree(N.BVarity)(OtherthanSAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	12896	10598	10640	10920
	(iv) 1050 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 300 mm dia. of approved make
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	12665	11770	11232	10924	12278	12108	12315	11478	11996	11997	11595	-	-	-	-
	B) With Bazree (N.B Variety) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	13471	11173	11215	11495
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	12626	11731	11193	10885	12239	12069	12276	11439	11957	11958	11553	-	-	-	-
	B) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	13430	11131	11174	11454
	(v) Extra for additional depth beyond 1.5 metre.
	(a) For (i) and (ii)	PerMtr	3400	3113	2806	2806	3350	3320	3290	2949	3172	3162	3163	3954	3153	3153	3183
	(b) For (iii) and (iv)	Permtr	3590	3282	2953	2953	3536	3504	3472	3106	3346	3335	3336	4185	3325	3325	3358
3.	Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	35745	33598	31967	31409	34981	34634	34971	32721	34083	34076	33521	-	-	-	-
	B) With Bazree (N.B Variety) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	38514	32743	32820	33365
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	35545	33398	31767	31209	34781	34435	34771	32521	33883	33876	33311	-	-	-	-
	B)WithBazree(N.BVariety)(OtherthanSAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	38304	32533	32610	33155
	A) With Pakur variety. (SAIL/TATA/RINL)	Each
	B) With Bazree (N.B Variety) (SAIL/TATA/RINL)	Each
	A) With Pakur variety. (OtherthanSAIL/TATA/RINL)	Each
	B)WithBazree(N.BVariety)(OtherthanSAIL/TATA/RINL)	Each
	(iii) For 30 users
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	62210	58234	55298	54232	60756	60101	60750	56653	59150	59131	57994	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	67115	56508	56655	57692
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	61823	57847	54911	53845	60370	59715	60364	56267	58764	58745	57588	-	-	-	-
	B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	66709	56102	56249	57286
	(iv) For 50 users
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	89678	83846	79680	77936	87438	86452	87599	81607	85180	85176	83307	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	96304	80710	80951	82565
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	89051	83220	79053	77309	86811	85825	86972	80980	84553	84549	82649	-	-	-	-
	B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	95646	80052	80293	81906
	(v) For 100 users
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	113132	105840	100876	98447	110169	108891	110585	103174	107509	107536	104924	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	121082	101608	10943	104097
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	112264	104972	10008	97578	109300	108022	109716	102305	106641	10667	104012	-	-	-	-
	B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	120170	100696	101031	103185
	(vi) For 200 users
	A) With Pakur variety. (SAIL/TATA/RINL)	Each	177928	165726	157746	153251	172715	170518	173816	161446	168488	168591	163534	-	-	-	-
	B) With Bazree (N.B Varity) (SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	-	186996	154310	154931	158753
	A) With Pakur variety. (Other than SAIL/TATA/RINL)	Each	176328	164126	156147	151651	17116	168919	172217	159847	166889	166992	161855	-	-	-	-
	B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)	Each	-	-	-	-	-	-	-	-	-	-	--	185317	152631	153252	157074
4.	Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
	(SAIL/TATA/RINL)	Each	16577	15272	13904	13828	16328	16137	16130	14522	15484	15480	15381	19073	15466	15511	15574
	(Other than SAIL/TATA/RINL)	Each	16544	15238	13870	13794	16295	16104	16097	14488	15451	15447	15346	19038	15431	15476	15539
5.	Open jointed stone ware pipe 100 mm dia. supplied, laid and fitted in position duly encircled all round by 150 mm thick layer jhama metal (38 mm to 50 mm size) including excavation of earth in any soil upto required depth including refilling trench,watering and ramming complete. (Cost of Jhama Metal to be paid seperately).	Each	273	273	273	273