BASIC RATES (17.0 SANITARY INSTALLATIONS) | |||
Code No. |
Description | Unit | Rate |
0100 | Bandhani | day | 617.00 |
0101 | Bhisti | day | 617.00 |
0103 | Blacksmith 2nd class | day | 679.00 |
0112 | Carpenter 2nd class | day | 679.00 |
0114 | Beldar | day | 558.00 |
0115 | Coolie | day | 558.00 |
0116 | Fitter (grade 1) | day | 738.00 |
0117 | Assistant Fitter or 2nd class Fitter | day | 679.00 |
0123 | Mason (brick layer) 1st class | day | 738.00 |
0124 | Mason (brick layer) 2nd class | day | 679.00 |
0128 | Mate | day | 617.00 |
0131 | Painter | day | 679.00 |
0295 | Stone Aggregate (Single size) : 20 mm nominal size | cum | 1350.00 |
0297 | Stone Aggregate (Single size) : 10 mm nominal size | cum | 1350.00 |
0367 | Portland Cement (OPC-43 Grade) | tonne | 4940.00 |
0586 | Chromium plated Brass screws 40 mm | 100 Nos | 290.00 |
0588 | Chromium plated Brass screws 25 mm | 100 Nos | 180.00 |
0828 | Anticorrosive bituminous paint (black) | litre | 100.00 |
0830 | Enamel paint | litre | 165.00 |
0834 | Synthetic enamel paint in all shades except black or chocolate shade | litre | 160.00 |
0982 | Coarse sand (zone III) | cum | 1350.00 |
1007 | Structural steel such as tees, angles channels and R.S. joists | quintal | 4600.00 |
1309 | C.I. bracket for wash basin and sinks | pair | 88.00 |
1313 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. | each | 200.00 |
1315 | C.P.brass chain with 40 mm dia rubber plug | each | 40.00 |
1330 | Clamps and M.S. stays including bolts and nuts for 100 mm pipe | each | 67.50 |
1331 | M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe | each | 30.00 |
1332 | M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe | each | 27.00 |
1334 | Clamps and M.S. stays including bolts and nuts for 50 mm pipe | each | 35.00 |
1335 | Clamps and M.S. stays including bolts and nuts for 75 mm pipe | each | 37.00 |
1350 | Mosquito proof coupling of approved design | each | 30.00 |
1363 | Vitreous china foot rests 250x130x30 mm | pair | 100.00 |
1369 | S.C.I. gully or nahani grating 100 mm dia | each | 25.00 |
1373 | Rubber insertions for 75 mm dia pipe joints | each | 16.00 |
1374 | Rubber insertions for 100 mm dia pipe joints | each | 18.00 |
1392 | Mirror of superior make glass 60x45 cm | each | 400.00 |
1396 | Vitreous china pedestal for wash basin | each | 900.00 |
1397 | Pig lead | kg | 176.00 |
1532 | Flush pipe with union spreaders and clamps all in C.P. brass for single stall | each | 270.00 |
1533 | Flush pipe with union spreaders and clamps all in C.P. brass for double stall | each | 400.00 |
1534 | Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall | each | 520.00 |
1535 | Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall | each | 600.00 |
1540 | Flush pipe and spreaders G.l. for single set of one squatting plate urinal | each | 175.00 |
1541 | Flush pipe and spreaders G.l. for range of two squatting plates urinal | each | 250.00 |
1542 | Flush pipe and spreaders G.l. for range of three squatting plates urinal | each | 300.00 |
1543 | Flush pipe and spreaders G.l. for range of four squatting plates urinal | each | 390.00 |
1614 | G.I. inlet connection | each | 60.00 |
1616 | S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia | each | 1050.00 |
1617 | S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100 mm dia | each | 1135.00 |
1620 | S.C.I. plain bend 75 mm dia | each | 210.00 |
1621 | S.C.I. plain bend 100 mm dia | each | 258.00 |
1624 | S.C.I. bend with access door 75 mm dia | each | 240.00 |
1625 | S.C.I. bend with access door 100 mm dia | each | 300.00 |
1627 | S.C.I. plain single equal junctions 75x75x75 mm dia | each | 278.00 |
1628 | S.C.I. plain single equal junctions 100x100x100 mm dia | each | 360.00 |
1630 | S.C.I. single equal junctions 75x75x75 mm dia with access door | each | 320.00 |
1631 | S.C.I. single equal junctions 100x100x100 mm dia with access door | each | 405.00 |
1633 | S.C.I. plain double equal junctions 75x75x75x75 mm dia | each | 382.00 |
1634 | S.C.I. plain double equal junctions 100x100x100x100 mm dia | each | 590.00 |
1636 | S.C.I. double equal junctions 75x75x75x75 mm dia with access door | each | 500.00 |
1637 | S.C.I. double equal junctions 100x100x100x100 mm dia with access door | each | 715.00 |
1639 | Slotted cowl (terminal guard) 75 mm dia | each | 191.00 |
1640 | Slotted cowl (terminal guard) 100 mm dia | each | 239.00 |
1653 | Sand cast iron S&S plain single unequal junctions: 100x100x 75 mm dia | each | 494.00 |
1656 | Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door | each | 550.00 |
1659 | Sand cast iron S&S plain double unequal junctions: 100x100x75x 75 mm dia | each | 615.00 |
1662 | Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door | each | 700.00 |
1666 | Sand cast iron heel rest bend 75 mm dia | each | 274.00 |
1667 | Sand cast iron heel rest bend 100 mm dia | each | 347.00 |
1669 | S.C.I. single equal invert branch of required degree 75x75x75 mm dia | each | 320.00 |
1670 | S.C.I. single equal invert branch of required degree 100x100x 100 mm dia | each | 410.00 |
1672 | S.C.I. double equal invert branch of required degree 75x75x75x 75 mm dia | each | 410.00 |
1673 | S.C.I. double equal invert branch of required degree 100x100x 100x100 mm dia | each | 550.00 |
1674 | S.C.I. single unequal invert branch of required degree 100x100x 75 mm dia | each | 495.00 |
1677 | S.C.I. double unequal invert branch of required degree 100x100x 75x75 mm dia | each | 570.00 |
1682 | S.C.I. door pieces 75 mm dia | each | 283.00 |
1683 | S.C.I. door pieces 100 mm dia | each | 475.00 |
1685 | S.C.I. collar 75 mm dia | each | 177.00 |
1686 | S.C.I. collar 100 mm dia | each | 246.00 |
1863 | Fire clay kitchen sink: 600x450x250 mm | each | 1283.00 |
1871 | White vitreous china laboratory sink 450x300x150 mm | each | 1500.00 |
1872 | White vitreous china laboratory sink 600x450x200 mm | each | 2500.00 |
1875 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers | each | 400.00 |
1876 | Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers | each | 310.00 |
1881 | Spun yarn | kg | 50.00 |
1885 | 15 mm C.P. brass tap | each | 207.00 |
1889 | C.P. brass toilet paper holder of standard size | each | 225.00 |
1891 | C.I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 50 mm dia | each | 170.00 |
1893 | C.I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 80 mm dia | each | 225.00 |
1895 | C.P. brass trap 40 mm dia | each | 300.00 |
1896 | 100 mm S.C.I. trap with vent heel | each | 320.00 |
1897 | 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet | each | 271.00 |
1898 | 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet | each | 218.00 |
1913 | Vitreous china lipped front urinal | each | 460.00 |
1915 | Vitreous china squatting plate urinal | each | 1053.00 |
1947 | Vitreous china flat back wash basin 630x450 mm | each | 725.00 |
1949 | Vitreous china angle back wash basin 600x480 mm | each | 725.00 |
1950 | Vitreous china angle back wash basin 400x400 mm | each | 425.00 |
1951 | C.P. brass waste 32 mm | each | 80.00 |
1952 | C.P. brass waste 40 mm | each | 95.00 |
1953 | Vitreous china Indian type W.C. pan of size 580 mm | each | 450.00 |
1954 | Vitreous china orrisa type W.C. pan of size 580 mm | each | 1200.00 |
1955 | Vitreous china pedestal type water closet | each | 1000.00 |
1965 | White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacturer's specifications | each | 2500.00 |
1966 | Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc | each | 9500.00 |
1970 | Vitreous china foot rests 250x125x25 mm | pair | 100.00 |
2202 | Carriage of Stone aggregate below 40 mm nominal size | cum | 103.77 |
2203 | Carriage of Coarse sand | cum | 103.77 |
2205 | Carriage of Steel | tonne | 92.24 |
2209 | Carriage of Cement | tonne | 92.24 |
3213 | Vitreous china Surgeon type wash basin of size 660x460 mm | each | 1000.00 |
3228 | 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size |
each | 250.00 |
3229 | Vitreous china flat back wash basin 550x400 mm | each | 545.00 |
3617 | C.P. Brass union 40mm dia | each | 200.00 |
3620 | C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long:100 mm dia | each | 1200.00 |
3621 | C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long:75 mm dia | each | 1100.00 |
3624 | S.C.I. S&S bends with access door 100 mm dia | each | 300.00 |
3625 | S.C.I. S&S bends with access door 75 mm dia | each | 250.00 |
3628 | S.C.I. S&S bend 100 mm dia | each | 265.00 |
3629 | S.C.I. S&S bend 75 mm dia | each | 195.00 |
3634 | S.C.I. S&S heel rest sanitary bend 100 mm dia | each | 296.00 |
3635 | S.C.I. S&S heel rest sanitary bend 75 mm dia | each | 250.00 |
3640 | S.C.I. S&S single equal junctions 100x100x100 mm | each | 472.00 |
3641 | S.C.I. S&S single equal junctions 75x75x75 mm | each | 330.00 |
3644 | S.C.I. S&S single equal junctions with access door 100x100x 100 mm |
each | 495.00 |
3645 | S.C.I. S&S single equal junctions with access door 75x75x75 mm | each | 373.00 |
3650 | S.C.I. S&S double equal junctions 100x100x100x100 mm | each | 620.00 |
3651 | S.C.I. S&S double equal junctions 75x75x75x75 mm | each | 462.00 |
3654 | S.C.I. S&S double equal junctions with access door 100x100x 100x100 mm | each | 615.00 |
3655 | S.C.I. S&S double equal junctions with access door 75x75x75x 75 mm |
each | 480.00 |
3660 | S.C.I. S&S single unequal junctions 100x100x75 mm | each | 570.00 |
3664 | S.C.I. S&S single unequal junctions with access door 100x100x 75 mm |
each | 640.00 |
3670 | S.C.I. S&S double unequal junctions 100x100x75x75 mm | each | 800.00 |
3674 | S.C.I. S&S double unequal junctions with access door 100x100x 75x75 mm | each | 850.00 |
3681 | S.C.I. S&S single equal invert branch of required degree 100x100x 100 mm dia | each | 425.00 |
3682 | S.C.I. S&S single equal invert branch of required degree 75x75x 75 mm dia | each | 323.00 |
3685 | S.C.I. S&S double equal invert branch of required degree 100x100x 100x100 mm dia | each | 530.00 |
3686 | S.C.I. S&S double equal invert branch of required degree 75x75x 75x75 mm dia | each | 425.00 |
3690 | S.C.I. S&S single unequal invert branch of required degree 100x 100x75 mm dia | each | 545.00 |
3695 | S.C.I. S&S double unequal invert branch of required degree 100x 100x75x75 mm dia | each | 725.00 |
3699 | S.C.I. S&S, 75 mm offset for 75 mm dia pipe | each | 225.00 |
3707 | S.C.I. S&S, 150 mm offset for 75 mm dia pipe | each | 285.00 |
3708 | S.C.I. S&S, 150 mm offset for 100 mm dia pipe | each | 390.00 |
3712 | S.C.I. S&S, 114 mm offset for 75 mm dia pipe | each | 300.00 |
3713 | S.C.I. S&S, 114 mm offset for 100 mm dia pipe | each | 383.00 |
3716 | S.C.I. S&S, 152 mm offset for 75 mm dia pipe | each | 358.00 |
3717 | S.C.I. S&S, 152 mm offset for 100 mm dia pipe | each | 455.00 |
3728 | S.C.I. S&S door pieces 100 mm dia | each | 400.00 |
3729 | S.C.I. S&S door pieces 75 mm dia | each | 295.00 |
3733 | S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm | each | 264.00 |
3734 | S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm | each | 210.00 |
3738 | S.C.I. S&S, collars 100 mm | each | 279.00 |
3739 | S.C.I. S&S, collars 75 mm | each | 170.00 |
3746 | S.C.I. S&S, 75 mm offset for 75 mm dia pipe | each | 218.00 |
3747 | S.C.I. S&S, 75 mm offset for 100 mm dia pipe | each | 363.00 |
3749 | Vitreous china toilet paper holder of standard size | each | 100.00 |
4202 | Red oxide Zinc chromate primer | litre | 110.00 |
7004 | Vitreous china flat back wash basin 450x300 mm | each | 310.00 |
7005 | Vitreous china 10 litres low level cistern without fittings | each | 715.00 |
7006 | Vitreous china 10 litres low level cistern with fittings | each | 1240.00 |
7048 | Rawl plug 50 mm (designation 10 nos) | each | 25.00 |
7072 | Wall mounted water closet of size 780 x 370x690 mm | each | 6000.00 |
7073 | Adjustable Vitreous China Cistern with fittings of flushing capacity 3 litre/ 6litre 9adjustibla to 4 litre/8litre) | each | 1900.00 |
7074 | White Vetrious China Waterless Urinal of size 600x330x315 mm | each | 9650.00 |
7075 | Cistern with fittings for Waterless Urinal | each | 2290.00 |
7076 | Battery based infrared sensor operated white Vitreous Urinal of aprox.size 610x390x370 mm | each | 4500.00 |
7095 | Stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 250 mm | each | 2480.00 |
7096 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 225 mm | each | 3000.00 |
7097 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm | each | 2800.00 |
7098 | Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 178 mm | each | 2500.00 |
7101 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm | each | 1800.00 |
7102 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm | each | 1200.00 |
7103 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm | each | 1050.00 |
7104 | Coloured Orissa pattern W.C. pan 580x440 mm | each | 1830.00 |
7105 | Coloured Pedestal type W.C. pan 580x440 mm (European type) | each | 860.00 |
7106 | Coloured Vitreous china 10 lit. low level cistern | each | 1050.00 |
7107 | Coloured (other than black) solid P.V.C. seat in European W.C. pan | each | 390.00 |
7112 | Circular shape 450 mm dia Mirror with Plastic moulded frame | each | 430.00 |
7113 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame | each | 290.00 |
7114 | Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame | each | 340.00 |
7115 | Rectangular shape 1500x450 mm Mirror with Plastic moulded frame | each | 670.00 |
7116 | Hard board 6 mm thick | sqm | 115.00 |
7117 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | each | 25.00 |
7118 | Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
each | 33.00 |
7119 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings | each | 35.00 |
7120 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
each | 35.00 |
7121 | Bottle Trap | each | 620.00 |
7122 | CP Brass Single lever telephonic wall mixer of approved make | each | 4500.00 |
7123 | Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings | each | 550.00 |
7126 | White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings | each | 700.00 |
7127 | Coloured Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings | each | 1150.00 |
7358 | Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) | each | 575.00 |
7359 | P.V.C. automatic flushing cistern 5 litre capacity | each | 470.00 |
7361 | P.V.C. automatic flushing cistern 10 litre capacity | each | 510.00 |
7363 | 15 mm C.P. brass tap with elbow operation lever | each | 430.00 |
7364 | White glazed fire clay draining board 600x450x25 mm | each | 525.00 |
7375 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal | each | 445.00 |
7376 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals | each | 765.00 |
7377 | G.i. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals | each | 1050.00 |
7378 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals | each | 1430.00 |
7379 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:2556 | each | 865.00 |
7406 | PTMT pillar cock | each | 125.00 |
7491 | PTMT - Waste Coupling 31/32 mm | each | 34.00 |
7492 | PTMT - Waste Coupling 38/40 mm | each | 48.00 |
7493 | PTMT - Bottle Trap 31/32 mm | each | 210.00 |
7494 | PTMT - Bottle Trap 38/40 mm | each | 220.00 |
7503 | PTMT Liquid Soap Container of 400 ml capacity | each | 105.00 |
7504 | PTMT - Towel Ring 215x200x37 mm | each | 130.00 |
7505 | PTMT - Towel Rail (450 mm long ) | each | 135.00 |
7506 | PTMT - Towel Rail (600 mm long) | each | 165.00 |
7507 | PTMT Shelf 450x124x36 mm | each | 200.00 |
7508 | PTMT - Urinal Spreader 15 mm | each | 76.00 |
7621 | Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia (3000 mm length pipe) |
metre | 700.00 |
7622 | Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia (3000 mm length pipe) | metre | 570.00 |
7623 | Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 100mm dia | each | 230.00 |
7624 | Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 75 mm dia | each | 160.00 |
7625 | Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 100x100x100x100 mm dia | each | 510.00 |
7626 | Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 75x75x75x75 mm dia | each | 275.00 |
7627 | Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 - 100x100x100 mm dia | each | 400.00 |
7628 | Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 - 75x75x75 mm dia | each | 215.00 |
7629 | Hubless centrifugally cast (spun) iron double unequal plain junction as per IS 15905 - 100x100x75x75 mm dia | each | 400.00 |
7630 | Hubless centrifugally cast (spun) iron single unequal plain junction as per IS 15905 -100x100x75 mm dia | each | 375.00 |
7631 | Hubless centrifugally cast (spun) iron double equal plain invert branch as per IS 15905 - 100x100x100x100 mm dia | each | 625.00 |
7632 | Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 - 100x100x100 mm dia | each | 390.00 |
7633 | Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 - 75x75x75 mm dia | each | 260.00 |
7634 | Hubless centrifugally cast (spun) iron single unequal plain invert branch 45 degree as per IS 15905 - 100x100x75 mm dia | each | 430.00 |
7635 | Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm dia pipe as per IS 15905 | each | 360.00 |
7636 | Hubless centrifugally cast (spun) iron 65 mm offset with 75 mm dia pipe as per IS 15905 | each | 295.00 |
7637 | Hubless centrifugally cast (spun) iron 130 mm offset with 100 mm dia pipe as per IS 15905 | each | 440.00 |
7638 | Hubless centrifugally cast (spun) iron 130 mm offset with 75 mm dia pipe as per IS 15905 | each | 310.00 |
7639 | Hubless centrifugally cast (spun) iron bend with access door - 100mm dia as per IS 15905 | each | 365.00 |
7640 | Hubless centrifugally cast (spun) iron bend with access door - 75mm dia as per IS 15905 | each | 290.00 |
7641 | Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) -100 mm dia as per IS 15905 | each | 270.00 |
7642 | Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 100 mm outlet as per IS 15905 | each | 540.00 |
7643 | Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per IS 15905 |
each | 385.00 |
7644 | SS 304 grade shielded coupling with EPDM rubber gasket for 100mm dia Hubless centrifugally cast (spun) iron | each | 275.00 |
7645 | SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm dia Hubless centrifugally cast (spun) iron | each | 250.00 |
7805 | Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578 mm | each | 4500.00 |
7806 | Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355 mm | each | 1500.00 |
7807 | Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345 mm | each | 2000.00 |
7808 | Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet | each | 450.00 |
7809 | Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet | each | 500.00 |
7858 | P.T.M.T. Urinal cock 15 mm dia | each | 106.50 |
9001 | C.P. Brass Centre Hole Basin Mixer With Cast Spout | each | 1600.00 |
9977 | Carriage | L.S. | 2.00 |
9988 | Carriage and sundries | L.S. | 2.00 |
9999 | Sundries | L.S. | 2.0 |
17.0 SANITARY INSTALLATIONS | |||
Code No. |
Description | Unit | Rate |
17.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
||
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
each | 5421.50 | |
17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
each | 9836.70 | |
17.2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
||
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid | each | 5260.95 | |
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid | each | 5140.55 | |
17.3 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
||
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid | each | 6685.00 | |
17.3.2 W.C. pan with ISI marked black solid plastic seat and lid | each | 6564.60 | |
17.4 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
||
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
each | 4982.25 | |
17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
each | 7677.75 | |
17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern |
each | 10605.30 | |
17.4.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern |
each | 14648.50 | |
17.5 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : |
||
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
each | 9360.60 | |
17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern |
each | 14020.75 | |
17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern |
each | 17307.55 | |
17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern |
each | 20448.85 | |
17.6 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : |
||
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
each | 7240.55 | |
17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern |
each | 10572.45 | |
17.6.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern |
each | 13931.70 | |
17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern |
each | 16718.80 | |
17.7 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
||
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
each | 3087.70 | |
17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
each | 2751.30 | |
17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
each | 2846.90 | |
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
each | 2510.45 | |
17.7.5 White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap |
each | 2751.30 | |
17.7.6 White Vitreous China Angle back wash basin size 400 x 400 mm with single 15 mm C.P. brass pillar tap |
each | 2349.90 | |
17.7.7 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap |
each | 2196.05 | |
17.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers |
each | 4052.35 | |
17.7.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked |
each | 3417.55 | |
17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap |
each | 3788.20 | |
17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap |
each | 4457.15 | |
17.7A | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
each | 4403.80 |
17.7B | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
each | 2398.70 |
17.8 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
each | 1420.15 |
17.9 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: |
||
17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm | each | 3163.25 | |
17.10 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
||
17.10.1 | Kitchen sink with drain board | ||
17.10.1.1 510x1040 mm bowl depth 250 mm | each | 5155.95 | |
17.10.1.2 510x1040 mm bowl depth 225 mm | each | 5851.70 | |
17.10.1.3 510x1040 mm bowl depth 200 mm | each | 5584.10 | |
17.10.1.4 510x1040 mm bowl depth 178 mm | each | 5182.70 | |
17.10.2 | Kitchen sink without drain board | ||
17.10.2.1 610x510 mm bowl depth 200 mm | each | 3631.55 | |
17.10.2.2 610x460 mm bowl depth 200 mm | each | 2828.75 | |
17.10.2.3 470x420 mm bowl depth 178 mm | each | 2628.10 | |
17.11 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : |
||
17.11.1 Size 450x300x150 mm | each | 4122.55 | |
17.11.2 Size 600x450x200 mm | each | 5460.45 | |
17.12 | Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required : |
||
17.12.1 White glazed fire clay draining board of size 600x450x 25 mm |
each | 1337.80 | |
17.13 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
||
17.13.1 Long pattern W.C. pan of size 580 mm | each | 1541.05 | |
17.13.2 Orissa pattern W.C. pan of size 580x440 mm | each | 2544.50 | |
17.14 | Extra for using coloured W.C. pan instead of white W.C. pan : | ||
17.14.1 Orissa pattern W.C. pan 580x440 mm | each | 842.90 | |
17.15 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
each | 2276.95 |
17.16 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. |
each | 260.90 |
17.16A | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
each | 297.55 |
17.17 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet : |
||
17.17.1 250x130x30 mm | pair | 214.60 | |
17.17.2 250x125x25 mm | pair | 214.60 | |
17.18 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
||
17.18.1 10 litre capacity - White | each | 999.95 | |
17.18.2 10 litre capacity - coloured | each | 971.40 | |
17.19 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
||
17.19.1 10 litre (full flush) capacity-white | each | 1839.70 | |
17.19.2 10 litre (full flush) capacity-coloured | each | 2441.80 | |
17.20 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
||
17.20.1 White solid plastic seat with lid | each | 571.00 | |
17.20.2 Black solid plastic seat with lid | each | 450.60 | |
17.20.3 Coloured (other than black & white) solid plastic seat with lid |
each | 557.65 | |
17.22 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
each | 116.10 |
17.22A | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
each | 883.05 |
17.22B |
Providing and fixing CP Brass Single lever telephonic wall mixer of (a) 15 mm nominal dia |
each | 6113.60 |
17.23 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
each | 1299.75 |
17.24 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
each | 3207.50 |
17.25 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
||
17.25.1 Flat back wash basin of size 630x450 mm | each | 1139.40 | |
17.25.2 Flat back wash basin of size 550x400 mm | each | 898.60 | |
17.25.3 Angle back wash basin of size 600x480 mm | each | 1139.40 | |
17.25.4 Angle back wash basin of size 400x400 mm | each | 738.05 | |
17.25.5 Flat back wash basin of size 450x300 mm | each | 584.15 | |
17.25.6 Surgeon type wash basin of size 660x460 mm | each | 1507.35 | |
17.26 | Providing and fixing kitchen sink including making all connections excluding cost of fittings. | ||
17.26.1 White glazed fire clay sink of size 600x450x250 mm | each | 1853.65 | |
17.27 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : |
||
17.27.1 Size 450x300x150 mm | each | 2143.95 | |
17.27.2 Size 600x450x200 mm | each | 3481.90 | |
17.28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
||
17.29 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | each | 44.60 |
17.30 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. |
each | 45.00 |
17.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
each | 1283.05 |
17.32 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
||
17.32.1 Circular shape 450 mm dia | each | 1242.00 | |
17.32.2 Rectangular shape 453x357 mm | each | 1120.25 | |
17.32.3 Oval shape 450x350 mm (outer dimensions) | each | 1185.60 | |
17.32.4 Rectangular shape 1500x450 mm | each | 1786.55 | |
17.33 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
each | 841.80 |
17.34 | Providing and fixing toilet paper holder : | ||
17.34.1 C.P. brass | each | 583.75 | |
17.34.2 Vitreous china | each | 426.15 | |
17.35 | Providing and fixing soil, waste and vent pipes : | ||
17.35.1 | 100 mm dia | ||
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 | metre | 1008.20 | |
17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
metre | 1092.20 | |
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
metre | 1051.75 | |
17.35.2 | 75 mm diameter : | ||
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 | metre | 923.25 | |
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
metre | 992.05 | |
17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
metre | 859.55 | |
17.36 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : |
||
17.36.1 75 mm dia pipe | each | 126.00 | |
17.36.2 100 mm dia pipe | each | 148.45 | |
17.37 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
||
17.37.1 For 100 mm dia pipe | each | 287.45 | |
17.37.2 For 75 mm dia pipe | each | 283.40 | |
17.38 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
||
17.38.1 | 100 mm dia | ||
17.38.1.1 Sand cast iron S&S as per IS - 1729 | each | 461.65 | |
17.38.1.2 Sand cast iron S&S as per IS - 3989 | each | 461.65 | |
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 548.60 | |
17.38.2 | 75 mm dia | ||
17.38.2.1 Sand cast iron S&S as per IS - 1729 | each | 371.40 | |
17.38.2.2 Sand cast iron S&S as per IS- 3989 | each | 384.75 | |
17.38.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 438.30 | |
17.39 | Providing and fixing plain bend of required degree. | ||
17.39.1 | 100 mm dia | ||
17.39.1.1 Sand cast iron S&S as per IS - 1729 | each | 381.35 | |
17.39.1.2 Sand cast iron S&S as per IS : 3989 | each | 390.75 | |
17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
each | 343.90 | |
17.39.2 | 75 mm dia | ||
17.39.2.1 Sand cast iron S&S as per IS -1729 | each | 309.85 | |
17.39.2.2 Sand cast iron S&S as per IS - 3989 | each | 289.75 | |
17.39.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
each | 242.95 | |
17.40 | Providing and fixing heel rest sanitary bend | ||
17.40.1 | 100 mm dia | ||
17.40.1.1 Sand cast iron S&S as per IS - 1729 | each | 500.45 | |
17.40.1.2 Sand cast iron S&S as per IS - 3989 | each | 432.20 | |
17.40.2 | 75 mm dia | ||
17.40.2.1 Sand cast iron S&S as per IS - 1729 | each | 395.45 | |
17.40.2.2 Sand cast iron S&S as per IS - 3989 | each | 363.35 | |
17.41 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : |
||
17.41.1 | 100x100x100x100 mm | ||
17.41.1.1 Sand cast iron S&S as per IS - 1729 | each | 1016.55 | |
17.41.1.2 Sand cast iron S&S as per IS - 3989 | each | 882.75 | |
17.41.2 | 75x75x75x75 mm | ||
17.41.2.1 Sand cast iron S&S as per IS - 1729 | each | 719.25 | |
17.41.2.2 Sand cast iron S&S as per IS - 3989 | each | 692.50 | |
17.42 | Providing and fixing double equal plain junction of required degree. | ||
17.42.1 | 100x100x100x100 mm | ||
17.42.1.1 Sand cast iron S&S as per IS - 1729 | each | 825.55 | |
17.42.1.2 Sand cast iron S&S as per IS - 3989 | each | 865.70 | |
17.42.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outsideIS:15905 |
each | 718.55 | |
17.42.2 | 75x75x75x75 mm | ||
17.42.2.1 Sand cast iron S&S as per IS - 1729 | each | 539.95 | |
17.42.2.2 Sand cast iron S&S as per IS - 3989 | each | 647.00 | |
17.42.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 |
each | 396.80 | |
17.43 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
||
17.43.1 | 100x100x100 mm | ||
17.43.1.1 Sand cast iron S&S as per IS - 1729 | each | 602.15 | |
17.43.1.2 Sand cast iron S&S as per IS - 3989 | each | 722.55 | |
17.43.2 | 75x75x75 mm | ||
17.43.2.1 Sand cast iron S&S as per IS - 1729 | each | 478.40 | |
17.43.2.2 Sand cast iron S&S as per IS - 3989 | each | 549.35 | |
17.44 | Providing and fixing single equal plain junction of required degree : | ||
17.44.1 | 100x100x100 mm | ||
17.44.1.1 Sand cast iron S&S as per IS - 1729 | each | 517.85 | |
17.44.1.2 Sand cast iron S&S as per IS - 3989 | each | 667.70 | |
17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 571.35 | |
17.44.2 | 75x75x75 mm | ||
17.44.2.1 Sand cast iron S&S as per IS - 1729 | each | 400.80 | |
17.44.2.2 Sand cast iron S&S as per IS - 3989 | each | 470.40 | |
17.44.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 316.55 | |
17.45 | Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: |
||
17.45.1 100x100x75x75 mm | |||
17.45.1.1 Sand cast iron S&S as per IS - 1729 | each | 996.80 | |
17.45.1.2 Sand cast iron S&S as per IS - 3989 | each | 1197.50 | |
17.46 | Providing and fixing double unequal plain junction of required degree : |
||
17.46.1 100x100x75x75 mm | |||
17.46.1.1 Sand cast iron S&S as per IS - 1729 | each | 859.00 | |
17.46.1.2 Sand cast iron S&S as per IS - 3989 | each | 1106.55 | |
17.46.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 571.35 | |
17.47 | Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : |
||
17.47.1 | 100x100x75 mm | ||
17.47.1.1 Sand cast iron S&S as per IS - 1729 | each | 796.15 | |
17.47.1.2 Sand cast iron S&S as per IS - 3989 | each | 916.55 | |
17.48 | Providing and fixing single unequal plain junction of required degree : |
||
17.48.1 | 100x100x75 mm | ||
17.48.1.1 Sand cast iron S&S as per IS - 1729 each 697.10 | |||
17.48.1.2 Sand cast iron S&S as per IS - 3989 each 798.80 | |||
17.48.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 537.90 |
|||
17.49 | Providing and fixing double equal plain invert branch of required degree: | ||
17.49.1 | 100x100x100x100 mm | ||
17.49.1.1 Sand cast iron S&S as per IS - 1729 | each | 772.05 | |
17.49.1.2 Sand cast iron S&S as per IS 3989 | each | 745.30 | |
17.49.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 872.40 | |
17.49.2 | 75x75x75x75 mm | ||
17.49.2.1 Sand cast iron S&S as per IS - 1729 | each | 577.45 | |
17.49.2.2 Sand cast iron S&S as per IS - 3989 | each | 597.50 | |
17.50 | Providing and fixing single equal plain invert branch of required degree : |
||
17.50.1 | 100x100x100 mm | ||
17.50.1.1 Sand cast iron S&S as per iron 1729 | each | 584.75 | |
17.50.1.2 Sand cast iron S&S as per IS - 3989 | each | 604.80 | |
17.50.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 557.95 | |
17.50.2 | 75x75x75 mm | ||
17.50.2.1 Sand cast iron S&S as per IS - 1729 | each | 453.10 | |
17.50.2.2 Sand cast iron S&S as per IS - 3989 | each | 461.05 | |
17.50.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 376.75 | |
17.51 | Providing and fixing double unequal invert branch of required degree : |
||
17.51.1 | 100x100x75x75 mm | ||
17.51.1.1 Sand cast iron S&S as per IS - 1729 | each | 798.80 | |
17.51.1.2 Sand cast iron S&S as per IS - 3989 | each | 1006.20 | |
17.52 | Providing and fixing single unequal plain invert branch of required degree : |
||
17.52.1 | 100x100x75 mm | ||
17.52.1.1 Sand cast iron S&S as per IS - 1729 | each | 698.45 | |
17.52.1.2 Sand cast iron S&S as per IS - 3989 | each | 765.35 | |
17.52.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 611.50 | |
17.53 | Providing and fixing sand cast iron S&S off sets as per IS: 1729 | ||
17.53.1 | 76 mm off sets | ||
17.53.1.1 With 75 mm dia pipe | each | 320.55 | |
17.53.1.2 With 100 mm dia pipe | each | 514.55 | |
17.53.2 | 114 mm off sets | ||
17.53.2.1 With 75 mm dia pipe | each | 437.55 | |
17.53.2.2 With 100 mm dia pipe | each | 548.60 | |
17.53.3 | 152 mm off sets | ||
17.53.3.1 With 75 mm dia pipe | each | 527.00 | |
17.53.3.2 With 100 mm dia pipe | each | 656.75 | |
17.53A | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 |
||
17.53A.1 | 65 mm offsets | ||
17.53A.1.1 With 100 mm dia pipe | each | 510.55 | |
17.53A.1.2 With 75 mm dia pipe | each | 423.55 | |
17.54 | Providing and fixing sand cast iron S&S off sets as per IS: 3989 : | ||
17.54.1 | 75 mm off sets | ||
17.54.1.1 With 75 mm dia pipe | each | 329.90 | |
17.54.2 | 150 mm off sets | ||
17.54.2.1 With 75 mm dia pipe | each | 424.45 | |
17.54.2.2 With 100 mm dia pipe | each | 564.95 | |
17.54A | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 |
||
17.54A.1 130 mm offsets | |||
17.54A.1.1 With 100 mm dia | each | 624.85 | |
17.54A.1.2 With 75 mm dia | each | 443.65 | |
17.55 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : |
||
17.55.1 | 100 mm | ||
17.55.1.1 Sand cast iron S&S as per IS - 1729 | each | 695.80 | |
17.55.1.2 Sand cast iron S&S as per IS - 3989 | each | 595.45 | |
17.55.2 | 75 mm | ||
17.55.2.1 Sand cast iron S&S as per IS - 1729 | each | 428.90 | |
17.55.2.2 Sand cast iron S&S as per IS - 3989 | each | 444.95 | |
17.56 | Providing and fixing terminal guard : | ||
17.56.1 | 100 mm | ||
17.56.1.1 Sand cast iron S&S as per IS - 1729 | each | 355.95 | |
17.56.1.2 Sand cast iron S&S as per IS - 3989 | each | 389.40 | |
17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 397.40 | |
17.56.2 | 75 mm | each | 284.40 |
17.56.2.1 Sand cast iron S&S as per IS - 1729 | each | 309.85 | |
17.56.2.2 Sand cast iron S&S as per IS - 3989 | |||
17.57 | Providing and fixing collar : | ||
17.57.1 | 100 mm | ||
17.57.1.1 Sand cast iron S&S as per IS - 1729 | each | 365.30 | |
17.57.1.2 Sand cast iron S&S as per IS - 3989 | each | 409.45 | |
17.57.2 | 75 mm | ||
17.57.2.1 Sand cast iron S&S as per IS - 1729 | each | 265.70 | |
17.57.2.2 Sand cast iron S&S as per IS - 3989 | each | 256.30 | |
17.57A | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe |
||
17.57A.1 | 100 mm dia | ||
7.57A.2 | 175 mm dia | ||
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket |
each | 363.35 | |
17.58 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
||
17.58.1 100 mm | each | 481.45 | |
17.58.2 75 mm | each | 407.90 | |
17.58.3 50 mm | each | 329.50 | |
17.59 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : |
||
17.59.1 100 mm | each | 126.50 | |
17.59.2 75 mm | each | 78.40 | |
17.59.3 50 mm | each | 72.20 | |
17.60 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
||
17.60.1 | 100 mm inlet and 100 mm outlet | ||
17.60.1.1 Sand cast iron S&S as per IS: 3989 | each | 1512.55 | |
17.60.1.2 Sand Cast Iron S&S as per IS: 1729 | each | 1273.05 | |
17.60.2 | 100 mm inlet and 75 mm outlet | ||
17.60.2.1 Sand cast iron S&S as per IS - 3989 | each | 1579.45 | |
17.60.2.2 Sand Cast Iron S&S as per IS- 1729 | each | 1202.15 | |
17.60.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
each | 551.30 | |
17.61 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : |
||
17.61.1 100 mm dia | metre | 555.30 | |
17.61.2 75 mm dia | metre | 398.70 | |
17.61.3 50 mm dia | metre | 259.05 | |
17.62 | Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality ) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. |
each | 768.15 |
17.63 | Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete, including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. |
each | 516.35 |
17.64 | Repainting C.I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside surface of cistern, flush pipe, other fittings etc. complete. |
each | 223.90 |
17.65 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : |
||
17.65.1 100 mm diameter pipe | metre | 64.20 | |
17.65.2 75 mm diameter pipe | metre | 48.85 | |
17.66 | Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : |
||
17.66.1 100 mm diameter pipe | metre | 30.95 | |
17.66.2 75 mm diameter pipe | metre | 23.15 | |
17.67 | Repainting bath tub of size 1700x730x430 mm with enamel paint. | each | 630.55 |
17.68 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
||
17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
each | 10023.90 | |
17.69 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
||
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
each | 99.75 | |
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
each | 118.50 | |
17.70 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. | ||
17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
each | 335.25 | |
17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms |
each | 348.60 | |
17.71 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
each | 158.55 |
17.72 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
each | 228.20 |
17.73 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
||
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
each | 555.35 | |
17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
each | 595.50 | |
17.74 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
each | 642.30 |
17.75 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms. |
each | 119.75 |
17.76 | Providing and fixing PTMT urinal cock of approved quality and colour. | ||
17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms |
each | 164.05 | |
17.77 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. |
||
17.77.1 Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) |
each | 247.80 | |
17.77.2 Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes) |
each | 302.35 | |
17.77.3 Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes) |
each | 356.70 | |
17.78 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
each | 13852.45 |
17.79 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. |
each | 16868.15 |
17.80 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
each | 6913.90 |
17.81 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
each | 15457.95 |
****