SCHEDULE OF RATES



WRD: 5. LIFT IRRIGATION WORKS  SCHEDULE OF RATES

FOR THE YEAR : 2018-19 

Item nos Brief description of Item unit Basic rates
1 2 3 4
EXCAVATION & FOUNDATION TREATMENT WORKS
5.1.1 Excavation in all kinds of soil including boulders upto 0.6 m diameter ( 0.113 cum) for approach channel, foundation of jack-well / pump house, delivery chamber and appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed including cost of all materials, machinery, labour, working in wet and watery site conditions ( excluding dewatering ) etc., complete with lead upto 1 km and all lifts. cum 100
5.1.2 Excavation in all kinds of soil including boulders upto 0.6 m diameter ( 0.113 cum) for pipe line trenches, foundation of anchor blocks / saddles and other similar structures and placing the excavated stuff neatly as directed including cost of all materials, machinery, labour, barricading the area, providing danger lights and other safety measures etc.,complete with lead upto 1 km and all lifts. cum 111
5.2.1 Excavation in soft rock without blasting including boulders upto 0.6 m diameter ( 0.113 cum ) for approach channel, foundation of jackwell, pump house, delivery chamber and appurtenant structures and placing excavated stuff neatly in specified dump area or disposing off the same as directed includung cost of all materials, machinery, labour, working in wet and watery site conditions ( excluding dewatering) etc., complete with lead upto 1 km and all lifts. cum 130
5.2.2 Excavation in soft rock without blasting including boulders upto 0.6 m2 diameter ( 0.113 cum ) for pipe line trenches / foundation of anchor blocks / thrust blocks /saddles and other similar structures and placing the excavated stuff neatly as directed including cost of all materials, machinery, labour, barricading the area, providing danger lights and other safety measures etc., complete with lead upto 1 km and all lifts. cum 183
5.3.1 Excavation in soft rock requiring blasting including boulders upto 0.6 m diameter ( 0.113 cum ) for approach channel / foundation of jack-well / pump house / delivery chamber and appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed includung cost of all materials, machinery, labour, working in wet and watery site conditions ( excluding dewatering) etc., complete with lead upto 1 km and all lifts. cum 225
5.3.2 Excavation in soft rock requiring blasting including boulders upto 0.6 m diameter ( 0.113 cum ) for pipe line trenches / anchor blocks / thrust blocks / saddles and other similar structures and placing the excavated stuff neatly as directed including cost of all materials, machinery, labour, barricading the area, providing danger lights and other safety measures etc., complete with lead upto 1 km and all lifts. cum 289
5.4.1 Excavation in hard rock of all toughness including boulders above 0.60 m diameter ( 0.113 cum ) for approach channel / foundation of jack-well / pump house / delivery chamber and appurtenant structures and placing the excavated rock neatly in specified dump area or disposing off the same as directed including cost of all materials, machinery, labour, working in wet and watery site conditions (excluding dewatering ) etc., complete with lead upto 1 km and all lifts. cum 477
5.4.2 Excavation in hard rock of all toughness including boulders above 0.6 m diameter ( 0.113 cum ) for pipe line trenches / foundation of anchor blocks / thrust blocks / saddles and other similar structures and placing the excavated stuff neatly as directed including cost of all materials, machinery, labour, barricading the area, providing danger lights and other safety measures etc., complete with lead upto 1 km and all lifts. cum 672
5.5.1 Excavation in hard rock of all toughness including boulders above 0.6 m diameter ( 0.113 cum ) for approach channel / foundation of jack-well /pump house /delivery chamber and appurtenant structures by approved controlled blasting methods including control of vibrations by use of delay detonators and control of fly-rock by muffling arrangements and adopting only jack hammers for drilling holes and minimising damage to rock beyond excavation line by adopting any one or combination of line drilling / pre-splitting / smooth blasting techniques and placing the excavated rock neatly in specified dump area or disposing off the same as directed including cost of all materials, machinery, labour, working in wet and watery site conditions ( excluding dewatering ) etc., complete with lead upto 1 km and all lifts. cum 635
5.5.2 Excavation in hard rock of all toughness including boulders above 0.6 m diameter ( 0.113 cum ) for pipe line trenches / foundation of  anchor blocks / saddles and other similar structures by approved controlled blasting methods including control of vibration by use of delay detonators and control of fly-rock by muffling arrangements and adopting only jack hammers for drilling holes and adopting any one or combination of line drilling / pre-splitting / smooth blastrng techniques to minimise damage to rock beyond excavation line and placing the excavated rock neatly as directed including cost of all materials, materials, machinery, labour, barricading the area, providing danger lights and other safety measures etc.,complete with lead upto 1 km and all lifts. cum 839
5.6. Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selected earth, etc., complete with lead upto 50 m and lift upto 1.5 m. each 56
5.7. Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points etc., complete with lead upto 50 m and lift upto 1.5 m. cum 381
STEEL / CONCRETE & MASONRY WORKS :
5.8 Supplying, fabricating, erecting structural steel members fabricated 5.8. from rolled steel sections like channels / angles / beams / rails / plates etc., as per specifications and approved drawings including cost of all materials, machinery, labour, scaffolding, cutting, welding, grinding, cleaning, applying two coats of approved synthetic enamel paint over a coat of zinc chromate red oxide paint etc., complete with lead upto 1 km and all lifts. tonne 101400
5.9.1 Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for foundation filling / levelling course including cost of all materials, machinery, labour, formwork, cleaning bed, batching, mixing, placing in position, levelling, vibrating / tamping, finishing, curing etc., complete with lead upto 50 m. (Cement content : 240 kg / cum for use of super plasticiser) cum 5596
5.9.2 Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for foundation filling / levelling course including cost of all materials, machinery,  labour, formwork, cleaning bed, batching, mixing, placing in position, levelling, vibrating / tamping, finishing, curing etc., complete with lead upto 50 m. (Cement content : 300 kg / cum for use of super plasticiser) plasticiser ) cum 6082
5.1 Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for approach channel / fore-bay / delivery chamber bed lining including cost of all materials, machinery, labour, formwork, cleaning bed, batching, mixing, placing in position as specified, forming drainage holes, levelling,vibrating tamping, finishing, curing etc., complete with lead upto 50 m. ( Cement content : 300 kg / com for use of super plasticiser ) cum 6049
5.11. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for approach channel / fore-bay / delrvery chamber side lining including cost of all materials, machinery, labour, formwork, scaffolding, cleaning surface, batching, mixing, placing in position as specified, forming drainage holes, levelling, vibrating / tamping, finishing, curing etc., complete with  Note: lead upto 50 m and lift upto 1.5 m from bed level. ( Cement content : 300 kg / com for use of super plasticiser ) For every additional 1.5 m lift beyond 1.5 m from bed level add Cum 7328
cum 40.5
5.12. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for approach channel / fore-bay / delrvery chamber side lining including cost of all materials, machinery, labour, formwork, scaffolding, cleaning surface, batching, mixing, placing in position as specified, forming drainage holes, levelling, vibrating / tamping, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m from bed level. ( Cement content : 330 kg / com for use of super plasticiser ) For every additional 1.5 m lift beyond 1.5 m from bed level add Cum 7588
   
   
cum 40.5
5.14. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved clean, hard,graded aggregates for pump house sub-structure walls / piers / abutments / well steining and similar structures including cost of all materials, machinery, labour, formwor scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m from foundationlevel. (Cement content :330 kg / cum with use of super plasticiser) For every 1.5 m additional lift beyond 1.5 m from foundation level add Cum 8156
5.15. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved clean, hard, graded aggregates for columns / anchor blocks / thrust blocks / saddles and other similar structures including cost of all materials, machinery, labour, formwork, scaffolding, cleaning,batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m. ( Cement content : 330 kg / cum with use of plasticiser ) For every 1.5 m additional lift beyond 1.5 m add Cum 9011
     
     
5.16. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved clean, hard, graded aggregates for pump floor beams / pump floor slab / deck slab and other similar structures including cost of all materials, machinery, labour, formwork, scaffolding, cleaning,batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m. ( Cement content : 330 kg / cum with use of plasticiser ) For every 1.5 m additional lift beyond 1.5 m add Cum 9380
     
     
5.17. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved clean, hard, graded aggregates for beams / tie-beams / lintels / chajjas / roof slab and other similar structures including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing,curing etc., complete with lead upto 50 m and lift upto 1.5 m. ( Cement content:330 kg /cum with use of super plasticiser ) For every 1.5 m additional lift beyond 1.5 m add Cum 10039
     
     
5.18. Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved clean, hard, graded aggregates for cut-off walls / apron and other similar structures at valley crossing of pipe line including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing,curing etc., complete with lead upto 50 m and all lifts. ( Cement content : 330 kg / cum with plasticiser  Cum 7138
5.19. Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down approved clean, hard, graded aggregates for paving infront of pump house and other locations as directed ilcluding cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating / tamping, finishing top surface in CM 1 : 3 proportion by volume, curing etc., complete with lead upto 50 m and all lifts. ( Cement content : 240 kg / com for use of super plasticiser ) cum 5783
5.2 Providing and constructing un-coursed rubble stone masonry with approved stones in CM 1 : 4 proportion by volume for retaining walls / ground level reservoirs etc., including cost of all materials, machinery, labour, scaffolding, cleaning, batching and mixing mortar, packing mortar into joints, wedging with stone chips, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m. For every 1.5 m additional lift beyond 1.5 m add cum 3369
 
5.21. Providing and constructing size stone masonry in CM 1 : 4 proportion by volume for walls using 200 mm height size stones and pin headers from approved source including cost of all materials, machinery, labour, scaffolding, ramps, cleaning, batching and mixing mortar, packing mortar into joints, wedging with stone chips, finishing, curingetc., complete with lead upto 50 m and lift upto 1.5 m. For every 1.5 m additional lift beyond 1.5 m add Cum 4371
     
5.22 Providing and constructing burnt brick masonry in CM 1 : 4 proportion by volume for walls using burnt bricks from approved source including cost of all materials, machinery, labour, scaffolding, ramps, cleaning, batching and mixing mortar, packing mortar into joints, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m. For every 1.5 m additional lift beyond 1.5 m add Cum 6068
     
5.23 Providing and constructing cement concrete solid block masonry in CM 1 : 4 proportion by volume for walls using CC solid blocks from approved source including cost of all materials, machinery, labour, scaffolding, ramps, cleaning, batching and mixing mortar, packing mortar into joints, finishing, curing etc., complete with lead upto 50 m and lift upto 1.5 m For every 1.5 m additional lift beyond 1.5 m add. Cum 4522
     
5.24. Providing and fixing 1 mm thick Class-II ( 600 gms / sqm zinc coating 5.24. both side inclusive ) corrugated G.I sheets for roof with necessary fixtures such as 'J ' bolts with nuts, bitumin washers, G.I washers etc., including cost of all materials, machinery, labour, scaffolding etc., complete with lead upto 50 m and all lifts. Sqm 1018
5.25. Providing and fixing 1 mm thick Class-II ( 600 gms / sqm zinc coatingboth side inclusive ) plain G.I sheets for ridge portion of roof with washers etc.,including cost of all materials,machinery,labour, scaffolding etc.,complete with lead upto 50 m and all lifts. Rm  1094
5.26. Providing cement mortar pointing to rubble stone / size stone masonry in CM 1 : 3 proportion by volume including cost of all materials, labour, raking and cleaning joints for 50 mm depth, pressing mortar into joints, joints, scaffolding, finishing, curing etc., complete with lead upto 50 m and all lifts. Sqm  155
5.27 Providing 12 mm thick cement mortar plastering in CM 1:3 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts. Sqm  244
5.28. Providing 20 mm thick cement mortar plastering in CM 1:3 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts. Sqm  341
5.29.1 Providing and applying two coats of water proof cement paint of approved quality and colour including cost of all materials, labour, scraping and cleaning surface, scaffolding, curing etc., complete with all leads and lifts. Sqm  85
5.29.2 Providing and applying one coat of water proof cement paint of approved quality and colour including cost of all materials, labour, Sqm  47
5.30.1 Providing and applying two coats of plastic emulsion paint of approved quality and colour including cost of all materials, labour, scraping and cleaning surface, scaffolding etc. complete with all leads and lifts. Sqm  128
5.30.2 Providing and applying one coat of plastic emulsion paint of approved quality and colour including cost of all materials, labour, scraping and cleaning surface, scaffolding etc. complete with all leads and lifts. Sqm  64
5.31. Providing and fixing push and pull type rolling shutter ( excluding top cover ) made out of 18 gauge x 75 mm wide cold rolled steel lathes of convex corrugations complete with side guides,bottom rails, inter-locking arrangement by means of alternate end clips, suspension shaft with high tension coil type springs, locking arrangements, pulling hooks, handles and all other fittings and accessories including cost of all materials,labour, machinery, applying two coats of synthetic enamel paint of approved quality over a coat of zinc chromate red oxide primer paint etc., complete with all leads and lifts. Sqm  3039
5.32 Providing and fixing top cover to rolling shutter made out of 18 gauge cold rolled steel sheet including cost of all materials, machinery, labour, applying two coats of synthetic enamel paint of approved quality over a coat of zinc chromate red oxide primer paint etc.,complete with all leads and lifts. Rm  879
5.33. Providing and fixing steel door made of standard sections with single or double shutter fully panelled or partly panelled and partly glazed with 4 mm thick plain glass fixed to glazed panels with aluminium beading, all steel sections cut to length, joints mitred and but welded, all corners grinded, 40 x 5 mm size mild steel hold-fasts 40 cm long 2 numbers on each side, all other fixtures like hinges, tower bolts, 6 lever mortise lock, aldrops, handles, stays etc., including cost of all materials, machinery, labour, fixing frame in position, embedding hold-fasts in 15 cm thick CC 1: 3: 6 proportion by volume using 20 mm down approved clean, hard, graded aggregates, applying 2 coats of synthetic enamel paint of approved quality over a coat of zinc chromate red oxide primer paint etc., complete with all leads and lifts.    
5.33.1 Door frame made of 16 gauge CRCA sheets to 60 x 125 mm profile with rebate for shutter fixing and anular space in door frame packed with cement concrete or mortar and shutters made of 16 gauge 60 x 40 mm hollow pipes with 18 gauge M.S sheet of corrugated profile or formed to other specified profile welded to frame for panelled portion and 12 x 3 mm flats welded alround each halve of glazed portion of frame for fixing glass Sqm  6759
5.33.2 Door frame made of 16 gauge 80 x 40 mm hollow sections and shutters made of 16 gauge 60 x 40 mm hollow pipes with 18 gauge M.S sheet of corrugated profile or formed to other specified profile welded to the frame for panelled portion and 12 x 3 mm flats welded alround each halve of glazed portion of frame for fixing glass. Sqm  7973
5.34. Providing and fixing steel glazed windows and ventilators with frame and shutters made of extruded / pressed steel sections cut to length, joints mitred anf butt welded, corners grinded, shutters fitted with 4 mm thick plain glass with aluminium beading, 40 x 5 mm size mild steel hold-fasts 40 cm long 2 numbers on each side, all other fixtures like ball hinges, handles, telescopic stays etc., including cost of all materials, machinery, labour, fixing frame in position,emedding hold-fasts in 10 cm thick CC 1:3:6 proportion by volume using 20 mm down approved clean, hard graded aggregates, applying 2 coats of synthetic enamel paint of approved qualityover a coat of zinc chromate red oxide primer paint etc., complete with all leads and lifts.    
5.34.1 Frame made of 18 gauge 40 x 40 mm tubular sections and shutter made of extruded ' Z ' sections conforming to IS-7452 with 12 mm squre guard bars welded to frame at 12 cm centre to centre lakha   Sqm  4863
WRD: Providing and fixing acid resistant tiles of approved quality for battery room flooring / dadooing set over a bed of 20 mm thick CM 1 : 3 proportion by volume including cost of all materials, machinery, labour, cleaning surface, batching and mixing mortar, grouting joints with acid resistant mortar mix, finishing, curing etc., complete with lead upto 50 m and all lifts. sqm 1329
 
5.40.1 800 mm dia Pre-stressed concrete pipes Rm 7593
5.40.2 1000 mm dia Pre-stressed concrete pipes  Rm 9335
5.40.3 1200 mm dia Pre-stressed concrete pipes  1. The rates shall be updated for any drfference in market rates of pipes based on the quotations obtained from the nearest factory. 2. Lead charges shall be considered from the nearest factory and the weight of pipe per Rm for working out lead charges shall be as per the Rm 11490
   Statement of quantity of materials for working out lead charges  3. For pipes of any other size the rate per Rm may be increased  decreased proportionate to increase / decrease in diameter of pipe.
WRD: Supplying and laying ductile iron pipes ( safe for 18 kg / sqcm test pressure ) true to line and level with perfect linking at joint includingcost of all materials, machinery, labour, loading, unloading, rolling, lifting and lowering into trench, cleaning socket and spigot with soap solution, applying soft soap to socket and spigot ends,fixing rubber sealing ring in correct position, jointing pipes perfectly by jacking or other approved method, arranging water for testing, giving necessary hydraulic test at specified test pressure etc.,complete with lead upto 1 km and all lifts.    
 
5.41.
5.41.1 800 mm dia Ductile iron pipes Rm 18902
5.41.2 1000 mm dia Ductile iron pipes Rm 28369
5.41.3 1200 mm dia Ductile iron pipes  Note: 1. The rates shall be updated for any drfference in market rates of pipes based on the quotations obtained from the nearest factory. 2. Lead charges shall be considered from the nearest factory and the weight of pipe per Rm for working out lead charges shall be as per the Statement of quantity of materials for working out lead charges '. 3. For pipes of any other size the rate per Rm may be increased / decreased proportionate to increase / decrease in diameter of pipe. Rm 46117
WRD: Cutting pre-stressed concrete / ductile iron pipe to required length using suitable cutting tools wherever required and finishing the cut face neatly for perfect jointing including cost of all materials, machinery, labour etc., complete.    
 
5.42.1 800 mm dia pipes  Note: For cutting other pipes the rate per Each may be increased / decreased proportionate to increase / decrease in diameter of pipe. Each 789
WRD: Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) rising main of specified diameter and plate thickness provided with flanges / outlets wherever required for connecting to manifold system / for fixing valves and provided with 15 mm thick inner lining of CM 1:1.5 proportion by volume and 25 mm thick outer lining of CM 1:3 proportion by volume ( aggregate for outer lining shall be mixture of 80 percent natural sand and 20 percent 6 mm down crushed stone chips) over 13 gauge 50 x 50 mm opening size weld mesh including cost of all materials, machinery, labour, cutting, bending, welding, cement mortar lining, finishing, curing, conveying to spot, lowering, aligning, jointing, arranging water for testing, hydraulic testing at manufacturing site and after laying and jointing at specified test pressure etc.,complete as per specifications and approved drawings with lead upto 1 km and all lifts. Diameter of raising main : …….mm Thickness of plate : ……mm. Note: Rate per Rm of pipe = Rate per tonne x Weight of pipe per Rm Weight of pipe per Rm for specified diameter and plate thickness = 0.597 x Diameter of pipe in mm x Plate thickness in mm / 24000 tonne 90400
 
5.45.
WRD: Refilling pipe line trenches with available soil obtained from excavation of trenches in layers of 150 mm thickness ( before compaction ) including cost of all materials, machinery, labour, tamping each layer to specified degree of compaction etc., complete with lead upto 50 m. cum 260
 
5.46.
WRD: Removing top soil for an average depth of 15 cm from formation area of service road and removing grass, vegitation, jali-flora and other shrubs, bush / tree stumps by excavating pits, cutting trees upto 30 cm girth etc. including burning or disposal of waste materials and stacking useful wood as directed etc., complete with lead for disposal / stacking upto 50 m and all lifts. Note: For removing trees of girth more than 30 cm the rates provided under section ' Preliminary and Maintenance works ' may be adopted. sqm 44.5
 
5.47.
WRD: Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery , labour, spreading sand to specified thickness etc., complete with lead upto 50 m and all lifts. sqm 271
 
5.48
WRD: Formation of road embankment using surplus soil / murum from earth work excavation for pipe line trench in layers of 25 cm thickness ( before compaction ) including cost of all materials, machinery, labour, excavation of side gutters, spreading soil in layer of specified thickness, sorting out vegitation / roots, breaking clods, sectioning top surface to specified camber and sides to required slope, watering and ompaction by power roller to achieve specified density control etc., complete with lead upto 50 m and all lifts. cum 96
 
5.49.
WRD: Constructing embankment for road formation and at other locations wherever specifird using murum from approved borrow area in layers of 25 cm thickness ( before compaction ) including cost of all materials, machinery, labour, excavation of side gutters, collection of murum, spreading in layer of specified thickness, sorting out, breaking clods, sectioning top surface to specified camber and sides to required slope, watering and compaction by power roller to achieve specified density control etc., complete with lead upto 1 km and all lifts. cum 184
 
5.50.
WRD: Providing, laying, spreading uniformly hard crushed stone aggregate of specified size and gradation from approved sourse to specified width and thickness over rolled water bound macadam service road surface to proper grade and camber, hand packing, spreading and brooming binding material from approved source to fill up interstices of coarse aggregate, watering and compacting using power roller to achieve the specified density control including cost of all materials, machinery, labour etc., complete with lead upto 50 m and all lifts.    
 
5.51.
5.51.1 Conforming to Grade II size as per ' MORTH ' specifications cum 1983
5.51.2 Conforming to Grade III size as per ' MORTH ' specifications  Note: Cost of providing murrum shoulder for about 250 mm width is covered in rate for metalling. Measurements shall be only for quantity of metalling. cum 2162
WRD: Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using rubble stones and stone chips from approved source including cost of all materials, labour, hand packing, finishing etc.,complete with lead upto 50 m and all lifts. sqm 275
 
 5.52
  PUMPS & OTHER ACCESSORIES:    
WRD: Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specified operating head coupled to HT motor of adequate HP rating operating at 6.6 KV with flexible coupling, self water lubricated thrust bearings,    
   ischarge Tee with flanged end for connecting delivary pipe with all other standard accessories and safety devices etc., complete as per specifications, terms and conditions of contract.
5.53.  
5.53.1 V T pump coupled to more than 1000 hp upto 1500 hp motor hp 12600
5.53.2 V T pump coupled to more than 1500 hp upto 2000 hp motor  hp 13300
5.53.3 V T pump coupled to more than 2000 hp upto 2500 hp motor  hp 13990
5.53.4 V T pump coupled to more than 2500 hp upto 3000 hp motor  hp 14670
5.53.5 V T pump coupled to more than 3000 hp upto 3500 hp motor  hp 15350
WRD: Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console complete for use along with Power Factor capacitor bank as per specifications, terms and conditions of contract. Set 374970
 
5.57.
WRD: Supply and installation of Axillary DC supply system of approved make with battery charger cum DCDB with batteries for 110 A hour complete with all accessories. Set 678150
 
5.58
WRD: Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs for tripping with audiable alarm for both windings and bearings RTDs with all other accessories for satifactory functioning of the system etc., complete as per specifications, terms and conditions of contract.  Set 76730
 
5.59.
WRD:5.60 Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump. Set Set 155930
WRD: Supplying, installing and commissioning electro-magnetic type flow meter of approved make with all accessoreis including display panel in the pump house. Set 1E+06
 
5.61.
5.69.1 700 mm diameter butterfly valve with accessories Set 376400
5.69.2 800 mm diameter butterfly valve with accessories  Set 469600
5.69.3 900 mm diameter butterfly valve with accessories  Set 562400
5.69.3 5.69.4 1000 mm diameter butterfly valve with accessories  Set 673100
5.69.5 1100 mm diameter butterfly valve with accessories  Set 840300
5.69.6 1200 mm diameter butterfly valve with accessories  Set 1E+06
5.70.1 700 mm diameter butterfly valve with accessories  Set 422300
5.70.2 800 mm diameter butterfly valve with accessories  Set 517700
5.70.3 900 mm diameter butterfly valve with accessories  Set 640100
5.70.4 1000 mm diameter butterfly valve with accessories  Set 780300
5.70.5 1100 mm diameter butterfly valve with accessories  Set 956300
5.70.6 1200 mm diameter butterfly valve with accessories  Set 1E+06
WRD: Supplying and fixing Butterfly valve actuator DOL panel board with push button starter and all other accessories including wiring for specified number of valves etc complete.    
5.71.
5.72. Supplying, installing, testing and commissioning ( SITC ) Cast steel double flanged dual plate Check valve Class 150 conforming to API 594 of approved make of specified diameter and to withstand specified water pressure with all accessoreis true to line and perfect linking with pipes on either side including loading, unloading, lifting and placing in correct position, cleaning ends, inserting gaskets into correct position, jointing pipes and valve to form water tight joints, cost of all jointing materials, machinery, labour etc., complete with all leads and lifts.    
WRD: Supplying, installing, testing and commissioning ( SITC ) Cast steel double flanged dual plate Check valve Class 300 conforming to API 594 of approved make of specified diameter and to withstand specified water pressure with all accessoreis true to line and perfect linking with pipes on either side including loading, unloading, lifting and placing in correct position, cleaning ends, inserting gaskets into correct position, jointing pipes and valve to form water tight joints, cost of all jointing materials, machinery, labour etc., complete with all leads and lifts.    
 
5.73
5.75.1 80 mm diameter air valve with accessories Set 22070
5.75.2 100 mm diameter air valve with accessories  Set 25810
5.75.3 150 mm diameter air valve with accessories  Set 47500
5.75.4 200 mm diameter air valve with accessories  Set 51160
WRD: Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make body and seat ring of bronze PN 1.6 conforming to IS: 14845 of specified diameter with all fixtures including cost of all materials, machinery, labour etc., complete with all leads and lifts.    
 
5.76
5.76.1 80 mm diameter air valve with accessories Set 23290
5.76.2 100 mm diameter air valve with accessories Set Set 28780
5.76.3 150 mm diameter air valve with accessories Set Set 48190
5.76.4 200 mm diameter air valve with accessories Set Set 52070

*****