SOR:2019-20
(PART-I)
(WATER RESOURCES DEPARTMENT WORK ITEMS)
PREAMBLE
I.0 AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:
a) (i) 25% extra over the rates on labour component of works is allowed in all Municipal Corporation Limits of Andhra Pradesh except Greater Visakhapatnam and Vijayawada municipal corporations (up to a belt of 12 Kms. from Municipal Corporation limits) and other corporations as notified by the Government from time to time.
(ii) 40% extra over the rates on labour component of works for Greater Visakhapatnam and Vijayawada Municipal Corporation (up to a belt of 12 Kms. from Municipal Corporation limits).
(iii) 40% extra over the rates on labour component of works for Amaravati Capital City area(217 sq.km) as declared by the Govt.vide G.O.Ms.No.141,MA&UD (M2)Dept., dt:09.06.2015(This is introduced as per the Govt instructions issued in Govt.memo.No.668755/Reforms/2017 d:14.07.2017).
b) Allow 20% extra over basic rates on labour component of works in all District Headquarters and the remaining Municipal limits (up to a belt of 12 Kms from Municipal limits).
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates oflabour component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labourcomponent specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,Tiruchanoor, Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapleswara Swamy Temple, Kapilatheerthm, Tirupathi and Sri Kalyana Venkateswara Swamy Temple, Srinivasa Mangapuram , 20% extra over the basic rates of labour component for Tirupathi Municipal Corporation is allowed.
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds. Only equivalent number of Man Mazdoor shall be provided in the Jail premises and no women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works situated within 10Kms belt of Industrial area of, Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District, Macherla, Gurajala, Challapalli in Guntur District Garividi in Vijayanagaram District, Renigunta in Chittoor District and Yerraguntla & Mangampet in Kadapa District, Hindupur, Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District and Adoni, Dhone,Cement Nagar, Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool District, Anakapally of Vishakhapatnam District.
D) AGENCY / TRIBAL AREAS:
a) 25% extra is allowed for the works located within the interior Agency / Tribal limits,i.e. for the works located within & upto16 KMs from any all weather route inside Agency / Tribal.
b) 40% extra is allowed for the works located within the interior Agency / Tribal limits,i.e. for the works located beyond 16 KMs from any all weather route inside Agency / Tribal.
NOTE:
1. No extra percentage is permissible in respect of Forest produce such asBamboo, Rellu grass and for all materials obtained from outside the Agency / Tribal.
2. The extra percentage under Agency / Tribal areas allowance may be allowed on the labour component and on the labour charges in the rates for conveyance of materials.
3. The extra percentage on cost of materials in Agency / Tribal areas can beallowed on the labour component only, if they are manufactured in the Agency / Tribal areas itself except Forest produce.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the existing length of the road for the purpose of leads only for conveyance of materials based on the certificate for the Ghat Road given by the Superintending Engineer concerned.
Foot Note
Under compelling circumstances, the concerned Chief Engineer can adopt the equivalent length of road as 2 ½ times of actual length.
Note below area allowances:
If more than one area allowance ( such as those ) for (1) Municipalities (2)Agency / Tribal areas (3) Industrial areas are applicable for a particular situation, only the maximum out of the allowable percentages is to be allowed.
2.0 EXCAVATION OF TRIAL TRENCHES,TRIAL
PITS AND EXCAVATION IN RESTRICTED PLACES: -
I) EXCAVATION OF TRIAL TRENCHES
B. TRIAL PITS: 1) Up to 2 Metres depth |
… | 25% extra | ||||||||||||||||||||||
2) 2 Metres to 4 Metres depth | … | 50% extra | ||||||||||||||||||||||
3) 4 Metres to 6 Metres depth | … | 75% extra | ||||||||||||||||||||||
4) 6 Metres to 8 Metres depth | … | 100% extra | ||||||||||||||||||||||
5) 8 Metres to 9 Metres depth | … | 150% extra | ||||||||||||||||||||||
6) More than 9 Metres depth | … | 200% extra |
II)EXCAVATION IN RESTRICTED PLACES:-
I) Foundation of Buildings …. 75% extra
II) For pipe lines where the depth is lessthan 1.5 times the width
III) For pipe lines where the depth is 1.5 times or more than the width….75% extra….120% extra
IV) Silt removal in restricted areas such U.T’s., Culverts and Syphons….120% extra
V) Excavation of field channels ….75% extra
VI) For narrow trenches not more than 2 meters in width and depth not lessthan twice the width and for excavation of road boundary drains, model sections of canals
VII) High berm cutting of not more than 150 mm average thickness and sectioning for road….75% extra….50% extra
Note:
1) The extra percentage is allowed over Common item for all earth works (COM-MWRK- Manual Works) for corresponding soil and Standard data items. It includes the charges for all lifts and initial lead but does not include dewatering charges if any in respect of all the items under (A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted
places are to be allowed for (2/3)rd of the cost and shall not to be allowed in respect of items involving blasting component which may be taken as 1/3 of the cost.
3.0 SEIGNIORAGE CHARGES:
The rates of the materials indicated in the SOR are exclusive of Seigniorage
LABOUR RATES
Sl No. | CATEGORY OF WORKER | Rate Proposed by ENC(IW) for the year 2019-20 | |||||||||||||||||||||||||||||||||||||
1 | 2 | 3 | |||||||||||||||||||||||||||||||||||||
I. | SKILLED CATEGORY: | ||||||||||||||||||||||||||||||||||||||
1 | Bar bender | 620 | |||||||||||||||||||||||||||||||||||||
2 | Black smith / Tin smith / Rivetor | 490 | |||||||||||||||||||||||||||||||||||||
3 | Blaster | 570 | |||||||||||||||||||||||||||||||||||||
4 | Carpenter Cl- I | 570 | |||||||||||||||||||||||||||||||||||||
5 | Electrician ( Licensed ) | 575 | |||||||||||||||||||||||||||||||||||||
6 | Fitter Cl- I | 540 | |||||||||||||||||||||||||||||||||||||
7 | Floor Polisher / Tile Layer | 490 | |||||||||||||||||||||||||||||||||||||
8 | Foreman | 570 | |||||||||||||||||||||||||||||||||||||
9 | Gauge reader | 475 | |||||||||||||||||||||||||||||||||||||
10 | Maistry / Work Inspector with Non-technical Qualification SSLC/SSC/HSC | 520 | |||||||||||||||||||||||||||||||||||||
11 | Mason Cl- I / Brick layer Cl- I | 490 | |||||||||||||||||||||||||||||||||||||
12 | Mechanic Cl- I | 530 | |||||||||||||||||||||||||||||||||||||
13 | Operator Air compressor / DG set | 505 | |||||||||||||||||||||||||||||||||||||
14 | Operator Batching plant | 570 | |||||||||||||||||||||||||||||||||||||
15 | Operator Bus/Ambulance/ Lorry/ Tanker | 570 | |||||||||||||||||||||||||||||||||||||
16 | Operator Concrete / Asphalt mixer | 505 | |||||||||||||||||||||||||||||||||||||
17 | Operator Concrete / Asphalt paver | 505 | |||||||||||||||||||||||||||||||||||||
18 | Operator Concrete pump / Placer/ ice plant | 505 | |||||||||||||||||||||||||||||||||||||
19 | Operator Core drilling machine | 570 | |||||||||||||||||||||||||||||||||||||
20 | Operator Crane/ Tower crane/ Cable way | 570 | |||||||||||||||||||||||||||||||||||||
21 | Operator Drilling jumbo / Loco / Winch | 505 | |||||||||||||||||||||||||||||||||||||
22 | Operator Grouting/ Guniting/ Shotcreting | 505 | |||||||||||||||||||||||||||||||||||||
23 | Operator Jackhammer/Pneumatic tamper | 505 | |||||||||||||||||||||||||||||||||||||
24 | Operator Pump / Ventilation fan | 505 | |||||||||||||||||||||||||||||||||||||
25 | Operator Lathe/Drilling/Shearing machine | 570 | |||||||||||||||||||||||||||||||||||||
26 | Operator Bending / Planing machine | 505 | |||||||||||||||||||||||||||||||||||||
27 | Operator Road roller | 505 | |||||||||||||||||||||||||||||||||||||
28 | Operator Shovel / Scraper / Dozer | 570 | |||||||||||||||||||||||||||||||||||||
29 | Operator Spillway / Sluice gate | 505 | |||||||||||||||||||||||||||||||||||||
30 | Operator Crusher / Conveyor / Mucker | 505 | |||||||||||||||||||||||||||||||||||||
31 | Operator Tipper / Dumper / Transit mixer | 570 | |||||||||||||||||||||||||||||||||||||
32 | Operator Concrete vibrator | 505 | |||||||||||||||||||||||||||||||||||||
33 | Operator Vibratory plain / pad foot roller | 505 | |||||||||||||||||||||||||||||||||||||
34 | Operator Wagon drill / Drifter | 570 | |||||||||||||||||||||||||||||||||||||
35 | Painter Cl- I | 570 | |||||||||||||||||||||||||||||||||||||
36 | Plumber / Pipe fitter | 570 | |||||||||||||||||||||||||||||||||||||
37 | Sarang / Khalasi | 505 | |||||||||||||||||||||||||||||||||||||
38 | Spun pipe moulder | 505 | |||||||||||||||||||||||||||||||||||||
39 | Stone chiseller CI- I / Stone cutter Cl- l | 510 | |||||||||||||||||||||||||||||||||||||
40 | Struct. steel Fabricator / Marker / Erector | 615 | |||||||||||||||||||||||||||||||||||||
41 | Welder / Gas Cutter | 510 | |||||||||||||||||||||||||||||||||||||
42 | Welder (X-ray quality) | 570 | |||||||||||||||||||||||||||||||||||||
II. | SEMI SKILLED CATEGORY: | ||||||||||||||||||||||||||||||||||||||
1 | Asphalt Sprayer / Boiler attendant | 455 | |||||||||||||||||||||||||||||||||||||
2 | Bhisti | 455 | |||||||||||||||||||||||||||||||||||||
3 | Boatman with boat | 455 | |||||||||||||||||||||||||||||||||||||
4 | Carpenter Cl- II / Erector shuttering | 455 | |||||||||||||||||||||||||||||||||||||
5 | Cartman with double bullock cart | 515 | |||||||||||||||||||||||||||||||||||||
6 | Cartman with single bullock cart | 485 | |||||||||||||||||||||||||||||||||||||
7 | Chavali / Navagani | 455 | |||||||||||||||||||||||||||||||||||||
8 | Crowbarman / Jumper man | 455 | |||||||||||||||||||||||||||||||||||||
9 | Fitter Cl- II | 455 | |||||||||||||||||||||||||||||||||||||
10 | Gang man / Head / Survey mazdoor | 455 | |||||||||||||||||||||||||||||||||||||
11 | Gardener / Trained mali | 455 | |||||||||||||||||||||||||||||||||||||
12 | Air compressor / DG set | 455 | |||||||||||||||||||||||||||||||||||||
13 | Helper Batching plant | 460 | |||||||||||||||||||||||||||||||||||||
14 | Helper Blasting | 460 | |||||||||||||||||||||||||||||||||||||
15 | Helper Bus/ Ambulance/ Lorry/ Tanker | 460 | |||||||||||||||||||||||||||||||||||||
16 | Helper Bending/Shearing/Planing machine | 460 | |||||||||||||||||||||||||||||||||||||
17 | Helper Carpenter | 460 | |||||||||||||||||||||||||||||||||||||
18 | Helper Concrete / Asphalt mixer | 460 | |||||||||||||||||||||||||||||||||||||
19 | Helper Concrete / Asphalt paver | 460 | |||||||||||||||||||||||||||||||||||||
20 | Helper Core drilling machine | 460 | |||||||||||||||||||||||||||||||||||||
21 | Helper Crane/ Tower crane/ Cable way | 460 | |||||||||||||||||||||||||||||||||||||
22 | Helper Drilling jumbo / Loco / Winch | 460 | |||||||||||||||||||||||||||||||||||||
23 | Helper Fitter / Fabrication/Electrician | 460 | |||||||||||||||||||||||||||||||||||||
24 | Helper Grouting/ Guniting/ Shotcreting | 460 | |||||||||||||||||||||||||||||||||||||
25 | Helper Jack hammer / Pneumatic tamper | 460 | |||||||||||||||||||||||||||||||||||||
26 | Helper Laboratory / Instrumentation | 460 | |||||||||||||||||||||||||||||||||||||
27 | Helper Road roller | 460 | |||||||||||||||||||||||||||||||||||||
28 | Helper Shovel / Scraper / Dozer | 460 | |||||||||||||||||||||||||||||||||||||
29 | Helper Crusher / Conveyor / Mucker | 460 | |||||||||||||||||||||||||||||||||||||
30 | Helper Tipper / Dumper/ Transit mixer | 460 | |||||||||||||||||||||||||||||||||||||
31 | Helper Vibrator | 460 | |||||||||||||||||||||||||||||||||||||
32 | Helper Vibratory plain/ pad foot roller | 460 | |||||||||||||||||||||||||||||||||||||
33 | Helper Wagon drill/ Drifter | 460 | |||||||||||||||||||||||||||||||||||||
34 | Lineman Electric / Telephone | 455 | |||||||||||||||||||||||||||||||||||||
35 | Mason Cl- ll / Brick layer Cl-II | 455 | |||||||||||||||||||||||||||||||||||||
36 | Mechanic Cl- II | 455 | |||||||||||||||||||||||||||||||||||||
37 | Painter Cl- II | 455 | |||||||||||||||||||||||||||||||||||||
38 | Patkari / Neeraganti / Sowdy | 455 | |||||||||||||||||||||||||||||||||||||
39 | Stone Chiseller Cl- II | 455 | |||||||||||||||||||||||||||||||||||||
40 | Stone breaker / Hammer man | 455 | |||||||||||||||||||||||||||||||||||||
41 | Valve man / Canal sluice operator | 455 | |||||||||||||||||||||||||||||||||||||
III. | UN-SKILLED CATEGORY: | ||||||||||||||||||||||||||||||||||||||
1 | Cement / Asphalt handling mazdoor | 415 | |||||||||||||||||||||||||||||||||||||
2 | Civic worker | 415 | |||||||||||||||||||||||||||||||||||||
3 | Man mazdoor | 415 | |||||||||||||||||||||||||||||||||||||
4 | Woman mazdoor | 415 | |||||||||||||||||||||||||||||||||||||
5 | Watchman | 415 | |||||||||||||||||||||||||||||||||||||
IV. | OTHER CATEGORY: | ||||||||||||||||||||||||||||||||||||||
1 | Care-taker / conductor / Lift Attender | 470 | |||||||||||||||||||||||||||||||||||||
2 | Cook / Mess man | 470 | |||||||||||||||||||||||||||||||||||||
3 | Dhobi | 470 | |||||||||||||||||||||||||||||||||||||
4 | Diploma Engineer / Surveyor | 750 | |||||||||||||||||||||||||||||||||||||
5 | Diver with headgear | 590 | |||||||||||||||||||||||||||||||||||||
6 | Graduate / Laboratory Assistant | 580 | |||||||||||||||||||||||||||||||||||||
7 | Graduate Engineer/ Geologist | 960 | |||||||||||||||||||||||||||||||||||||
8 | Horticulture Assistant / Photographer | 475 | |||||||||||||||||||||||||||||||||||||
9 | ITI certificate holder / Tracer / Printer | 580 | |||||||||||||||||||||||||||||||||||||
10 | Literate mazdoor | 450 | |||||||||||||||||||||||||||||||||||||
11 | Stenographer / Computer Operator | 630 | |||||||||||||||||||||||||||||||||||||
12 | Telephone / Wireless Operator | 570 | |||||||||||||||||||||||||||||||||||||
13 | Typist / Job Typist | 570 | |||||||||||||||||||||||||||||||||||||
14 | CAD operator with Diploma in Engineering/General degree | 775 | |||||||||||||||||||||||||||||||||||||
15 | Jeep Driver | 565 | |||||||||||||||||||||||||||||||||||||
16 | Data Processing Operator | 775 |
Note:
1)The wage should not be less than the minimum wages of schedule ofemployment, subject to out turn.
2) 25% extra over the corresponding labour rates in respect of the work to be done during night time subject to issue of certificate accordingly by the concerned estimate sanctioning authority for providing in the data and by concerned Executive Engineer in charge of the work for payment. The night time allowance is applicable only to the works done under Greater Visakhapatnam Municipal Corporation and Vijayawada Municipal Corporation limits only.
BASIC INPUT DATAFOR WATER RESOURCE WORK ITEMS STATEMENT OF RATES FOR MATERIALS FOR THE YEAR : 2019-20
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, is the criteria forFixing market rates for materials.
2 The rates for materials are exclusive of GST, duties and other local levies.
3 The rates for materials are exclusive of Seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the Statement of lead charges is for all leads.
5.The rates provided for useful rubble / stone chips from excavation shall be at dump yard.
6.Unless otherwise specified the rate of materials are inclusive of loading charges
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | |||||||||||||||||||||||||||
1 | 2 | 3 | 4 | |||||||||||||||||||||||||||
1 | Acetylene gas | cum | 306 | |||||||||||||||||||||||||||
2 | Asphalt 80/100 Grade | Kg | 41 | |||||||||||||||||||||||||||
3 | Binding wire | Kg | 55 | |||||||||||||||||||||||||||
4 | Burnt stone slab 10 cm thick | sqm | 283 | |||||||||||||||||||||||||||
5 | Cement 43 Gr/53 Gr Note: Rate as fixed by the Government |
tonne | 3900 | |||||||||||||||||||||||||||
6 | Chequered plate | Kg | 57 | |||||||||||||||||||||||||||
7 | Coarse aggregate 10-4.75 mm | cum | 860 | |||||||||||||||||||||||||||
8 | Coarse aggregate 20-10 mm | cum | 1182 | |||||||||||||||||||||||||||
9 | Coarse aggregate 40-20 mm | cum | 1133 | |||||||||||||||||||||||||||
10 | Coarse aggregate 80-40 mm | cum | 622 | |||||||||||||||||||||||||||
The aggregate rates mentioned above (from Sl.No.7 to Sl.No.10) are exclusive of Seigniorage charges but including blasting charges of Rs.70/cum and 25% machine crushing charges. However, if the metal is obtained from hand broken, the blasting and crushing charges shall be deducted. The aggregate shall be HB Stone of Granite, Dolamite, Dolerite and Trap. (Quartzite and Basalt with aggregate impact of less than 20) |
||||||||||||||||||||||||||||||
11 | Coir brush | Each | 41 | |||||||||||||||||||||||||||
12 | Copper sheet 16 SWG | kg | 632 | |||||||||||||||||||||||||||
13 | Coursed rubble stone 30 x 30 x 45 cm | Each | 24 | |||||||||||||||||||||||||||
14 | Coursed rubble stone 30 x 30 x 60 cm | Each | 27 | |||||||||||||||||||||||||||
15 | Curing Compound | Ltr | 112 | |||||||||||||||||||||||||||
16 | D – cord | Rm | 6 | |||||||||||||||||||||||||||
17 | Delay - noiseless trunk | Each | 17 | |||||||||||||||||||||||||||
18 | Detonating fuse coil | Rm | 7 | |||||||||||||||||||||||||||
19 | Detonating shock tube / Cord relays | Rm | 33 | |||||||||||||||||||||||||||
20 | Detonator delay type | Each | 18 | |||||||||||||||||||||||||||
21 | Detonator electric | Each | 9 | |||||||||||||||||||||||||||
22 | Detonator ordinary | Each | 5 | |||||||||||||||||||||||||||
23 | Empty cement bag | Each | 5 | |||||||||||||||||||||||||||
24 | Explosive ANFO | kg | 40 | |||||||||||||||||||||||||||
25 | Explosive ANFO high strength booster | kg | 60 | |||||||||||||||||||||||||||
26 | Explosive small dia ( Kelvex-220 or equivalent) | kg | 60 | |||||||||||||||||||||||||||
27 | (a)Fine aggregate/ sand(un- screened) for Concrete & Filtering items) | cum | Rates to be finalized as per the Government sand policy | |||||||||||||||||||||||||||
(b)Fineaggregate/Sand(unscreened)for filling | ||||||||||||||||||||||||||||||
28 | Fine aggregate /Sand (Screened) for Mortar ,Plastering items and Sand blasting items (Rs.82 is added towards screening Charges) |
cum | ||||||||||||||||||||||||||||
29 | Geo-textile ( filter fabric ) 160 gsm | sqm | 89 | |||||||||||||||||||||||||||
30 | Geo-textile ( filter fabric ) 200 gsm | sqm | 105 | |||||||||||||||||||||||||||
31 | Geo-textile ( filter fabric ) 250 gsm | sqm | 120 | |||||||||||||||||||||||||||
32 | G I Pipe 100 mm dia B Class | Rm | 698 | |||||||||||||||||||||||||||
33 | G I Pipe 15 mm dia A class | Rm | 83 | |||||||||||||||||||||||||||
34 | G I pipe 25 mm dia A class | Rm | 140 | |||||||||||||||||||||||||||
35 | G I pipe 40 mm dia B class | Rm | 218 | |||||||||||||||||||||||||||
36 | G I pipe 50 mm dia A class | Rm | 250 | |||||||||||||||||||||||||||
37 | G I Pipe 80 mm dia B Class | Rm | 428 | |||||||||||||||||||||||||||
38 | G.I Bolts / Nuts and Washers | kg | 95 | |||||||||||||||||||||||||||
39 | G.I sheet ( plain ) | tonne | 55621 | |||||||||||||||||||||||||||
40 | Hariyala turfing sods | sqm | 25 | |||||||||||||||||||||||||||
41 | Hectometer stone one line dressed | Each | 259 | |||||||||||||||||||||||||||
42 | Hemp yarn | kg | 64 | |||||||||||||||||||||||||||
43 | Honne wood planks | cum | 43180 | |||||||||||||||||||||||||||
44 | Hume pipe with collar 150 mm dia | Rm | 243 | |||||||||||||||||||||||||||
45 | Hume pipe with collar 300 mm dia | Rm | 530 | |||||||||||||||||||||||||||
46 | J- Bolts 30 cm long | Each | 35 | |||||||||||||||||||||||||||
47 | Jungle wood planks | cum | 18390 | |||||||||||||||||||||||||||
48 | Khandki stone 15 to 20 cm height | Each | 11 | |||||||||||||||||||||||||||
49 | Khandki stone 20 to 25 cm height | Each | 15 | |||||||||||||||||||||||||||
50 | Khandki stone 25 to 30 cm height | Each | 17 | |||||||||||||||||||||||||||
51 | Kilometer stone one line dressed | Each | 477 | |||||||||||||||||||||||||||
52 | LDPE sheet ( Geo membrane ) 500 micron | sqm | 81 | |||||||||||||||||||||||||||
53 | LDPE sheet ( Geo membrane ) 750 micron | sqm | 119 | |||||||||||||||||||||||||||
54 | LDPE sheet ( Geo membrane ) 1000 micron | sqm | 164 | |||||||||||||||||||||||||||
55 | M S Bolts / Nuts / Washers | kg | 75 | |||||||||||||||||||||||||||
56 | Murrum | cum | 195 | |||||||||||||||||||||||||||
57 | Oxalic acid | Ltr | 70 | |||||||||||||||||||||||||||
58 | Oxygen gas | cum | 40 | |||||||||||||||||||||||||||
59 | PVC sealing strip | Rm | 40 | |||||||||||||||||||||||||||
60 | PVC water stopper 310 mm wide | Rm | 415 | |||||||||||||||||||||||||||
61 | PVC pipe of 100 mm dia | Rm | 150 | |||||||||||||||||||||||||||
62 | Reinforcement steel (HYSD/TMT ) Note: As per Monthly rate fixed by Sub- Committee |
tonne | ||||||||||||||||||||||||||||
63 | Resin bond Cement capsule | Each | 44 | |||||||||||||||||||||||||||
64 | Rough stone 20 x 20 x 75 cm | Each | 23 | |||||||||||||||||||||||||||
65 | Shahabad stone slab | sqm | 234 | |||||||||||||||||||||||||||
66 | Stone chips (at dump yard/Spoil ) | cum | 184 | |||||||||||||||||||||||||||
67 | Stone chips ( at quarry ) | cum | 347 | |||||||||||||||||||||||||||
68 | Structural steel angle / channel / beam / bars Note: As per Monthly rate fixed by Sub- Committee | tonne | ||||||||||||||||||||||||||||
69 | Structural steel plate / flats Note: As per Monthly rate fixed by Sub- Committee |
tonne | ||||||||||||||||||||||||||||
70 | Super Plasticizer (Conplast RP-264 or equivalent ) | kg | 45 | |||||||||||||||||||||||||||
71 | Synthetic Enamel paint 1st quality | Ltr | 224 | |||||||||||||||||||||||||||
72 | Synthetic adhesive ( Resin + Hardener ) | Kg | 292 | |||||||||||||||||||||||||||
73 | Tar felt joint filler board 12 mm thick | sqm | 336 | |||||||||||||||||||||||||||
74 | Tar felt joint filler board 20 mm thick | sqm | 510 | |||||||||||||||||||||||||||
75 | Through stones 20 x 20 x 30 to 45 cm | Each | 22 | |||||||||||||||||||||||||||
76 | Through stones 25 x 25 x 45 to 60 cm long | Each | 39 | |||||||||||||||||||||||||||
77 | Through stones 30 x 30 x 65 to 75 cm long | Each | 58 | |||||||||||||||||||||||||||
78 | Un-coursed rubble stones ( at dump yard /Spoil) |
cum | 154 | |||||||||||||||||||||||||||
79 | Un-coursed rubble stones ( at quarry) | cum | 316 | |||||||||||||||||||||||||||
80 | Water proofing compound | kg | 67 | |||||||||||||||||||||||||||
81 | Welding electrodes 4 mm dia | Each | 12 | |||||||||||||||||||||||||||
82 | Wire brush | Each | 38 | |||||||||||||||||||||||||||
83 | Wire mesh 20 gauge | sqm | 214 | |||||||||||||||||||||||||||
84 | Zinc chromate red oxide primer paint | sqm | 150 | |||||||||||||||||||||||||||
85 | inorganic zinc silicate | ltr | 502 | |||||||||||||||||||||||||||
86 | solvent less coal tar epoxy paint | ltr | 244 | |||||||||||||||||||||||||||
87 | Zinc phosphate primer | ltr | 186 | |||||||||||||||||||||||||||
88 | Allkyd based iron oxide paint | ltr | 150 | |||||||||||||||||||||||||||
89 | a) Cost of hdpe (90mm dia) | rm | 203 | |||||||||||||||||||||||||||
90 | welded steel wire fabric 100X100X5 mm size | kg | 423 | |||||||||||||||||||||||||||
91 | Protective Mastic | ltr | 172 | |||||||||||||||||||||||||||
92 | Solventless coal tar epoxy (brown) | ltr | 256 |
ADDITIONAL MATERIALS FOR G A T E S & HOISTS FOR THE YEAR: 2019-20
GUIDE LINES
a. For cast steel / Alloy steel / Forged steel / Bronze, aluminum alloy components the rates shall be inclusive of cost of basic metal for these components, casting / forging charges, machining charges and applicable excise duty on finished alloy component.
b. For other materials the rates shall be prevailing market rates.
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | ||||||||||||||||||||||||||||||||||||||
1 | 2 | 3 | 4 | ||||||||||||||||||||||||||||||||||||||
1 | Alloy steel ( IS : 1570-carbon steel ) shafts | Kg | 222 | ||||||||||||||||||||||||||||||||||||||
2 | Alloy steel ( IS : 1570-stainless steel ) pins | Kg | 408 | ||||||||||||||||||||||||||||||||||||||
3 | Bolt / Nut / Washer ( hot dipped galvanized ) | Kg | 132 | ||||||||||||||||||||||||||||||||||||||
4 | Bolt / Nut / Washer ( stainless steel ) | Kg | 345 | ||||||||||||||||||||||||||||||||||||||
5 | Bronze/Aluminum alloy(IS:305)bearings/bushes | Kg | 890 | ||||||||||||||||||||||||||||||||||||||
6 | Cast iron blocks | Kg | 80 | ||||||||||||||||||||||||||||||||||||||
7 | Cast steel drums / gears | Kg | 215 | ||||||||||||||||||||||||||||||||||||||
8 | Cast steel pinions | Kg | 210 | ||||||||||||||||||||||||||||||||||||||
9 | Cast steel wheels / pulleys / hubs / rollers / Retainers | Kg | 179 | ||||||||||||||||||||||||||||||||||||||
10 | Chemical for de-greasing/ de- rusting/phosphate | Ltr | 116 | ||||||||||||||||||||||||||||||||||||||
11 | Coal tar epoxy paint | Ltr | 175 | ||||||||||||||||||||||||||||||||||||||
12 | Forged steel hooks / shackles | Kg | 254 | ||||||||||||||||||||||||||||||||||||||
13 | MS pipe 200 / 300 mm dia | Kg | 163 | ||||||||||||||||||||||||||||||||||||||
14 | MS pipe 32 mm dia | Rm | 174 | ||||||||||||||||||||||||||||||||||||||
15 | MS pipe 25 mm dia | Rm | 141 | ||||||||||||||||||||||||||||||||||||||
16 | Rubber bottom seal ( IS : 11855 ) (100mmX14 mm) | Rm | 632 | ||||||||||||||||||||||||||||||||||||||
17 | Rubber side seal ( music note type Teflon claded ) ( IS : 11855 ) (36ØX113mmX14mm) | Rm | 1350 | ||||||||||||||||||||||||||||||||||||||
18 | Rubber side seal ( music note type uncladed ) ( IS : 11855 ) (36ØX113mmX14mm) |
Rm | 979 | ||||||||||||||||||||||||||||||||||||||
19 | Rubber side seal Z-type ( IS : 11855 ) (36ØX120mmX19mm) | Rm | 1295 | ||||||||||||||||||||||||||||||||||||||
20 | Rubber corner seal ( Teflon claded ) ( IS : 11855 ) (36Ø) | Each | 1359 | ||||||||||||||||||||||||||||||||||||||
21 | Rubber corner seal ( un claded ) ( IS : 11855 ) (36Ø) |
Each | 959 | ||||||||||||||||||||||||||||||||||||||
22 | Stainless steel plates / flats | kg | |||||||||||||||||||||||||||||||||||||||
23 |
Welding electrode 4 mm dia x 450 mm ( radiographic low hydrogen ) | Each | 15 | ||||||||||||||||||||||||||||||||||||||
24 | Welding electrode 4 mm dia x 450 mm ( stainless steel ) | Each | 21 | ||||||||||||||||||||||||||||||||||||||
25 | Wire rope 6x37 constn ( IS : 2266 ) | kg | 176 | ||||||||||||||||||||||||||||||||||||||
26 | Zinc | kg | 180 | ||||||||||||||||||||||||||||||||||||||
27 | Zinc rich ( zinc content : 90 % ) epoxy primer | ltr | 562 |
MATERIALS FOR POWER SUPPLY WORKS FOR THE YEAR : 2019-20
Sl No. | Description of Material | Unit | Rate Proposed by ENC(IW) for the year 2019-20 | ||||||||||||||||||||||||||||||||||
1 | Electric pole with fixtures | Each | For establishing Electrical Sub- Stations at the Project Sites wherever necessary, the rates approved by APTRANSCO may be followed. | ||||||||||||||||||||||||||||||||||
2 | Flood light 500 W | Each | |||||||||||||||||||||||||||||||||||
3 | Flood light set | Each | |||||||||||||||||||||||||||||||||||
4 | Flouscent tube light 40 W | Each | |||||||||||||||||||||||||||||||||||
5 | Flouscent tube light set | Each | |||||||||||||||||||||||||||||||||||
6 | HT / LT Circuit breaker with accessories | Set | |||||||||||||||||||||||||||||||||||
7 | HT / LT Line conductor | 1000 | |||||||||||||||||||||||||||||||||||
8 | PVC Armoured cable 10 sqmm and below | Rm | |||||||||||||||||||||||||||||||||||
9 | PVC Armoured cable 16 sqmm | Rm | |||||||||||||||||||||||||||||||||||
10 | PVC Armoured cable 25 sqmm | Rm | |||||||||||||||||||||||||||||||||||
11 | PVC Armoured cable 70 sqmm | Rm |
DETAILS OF CAPITAL COST OF MACHINERY/ EQUIPMENT FOR THE YEAR:2019-20 GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY/ EQUIPMENT:
1. The Capital cost of machinery / equipment shall be for new machinery / equipment and shall be exclusive of GST, duties, other levies.
2. The cost of transport vehicles / equipment shall be exclusive of cost of tyres and tubes.
3. The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges andOther consumable accessories shall not be included in the capital cost.
4. In cases, where the current capital cost of machinery / equipment could not be collected through enquiries, the capital cost considered for previous year may be updated on the basis of average percentage increase / decrease in the index for machinery published in theR.B.I Bulletin.
Sl No: | DESCRIPTION OF MACHINERY / EQUIPMENT | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | |||||||||||||||||||||||||
1 | 2 | 3 | 4 | |||||||||||||||||||||||||
1 | Agitator car / Transit mixer 2 cum ( excluding tyres ) | Each | 1787168 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
2 | Air compressor 5 cmm electric | Each | 590185 | |||||||||||||||||||||||||
3 | Air compressor 7 cmm diesel | Each | 789682 | |||||||||||||||||||||||||
4 | Air compressor 7 cmm electric | Each | 719021 | |||||||||||||||||||||||||
5 | Air compressor 8.5 cmm diesel | Each | 901895 | |||||||||||||||||||||||||
6 | Air compressor 8.5 cmm electric | Each | 930993 | |||||||||||||||||||||||||
7 | Air compressor 15 cmm electric | Each | 1138797 | |||||||||||||||||||||||||
8 | Angle Dozer 90 hp | Each | 4551040 | |||||||||||||||||||||||||
9 | Batching plant 0.5 cum with accessories(6 Cum/hr) | Each | 997486 | |||||||||||||||||||||||||
10 | Batching plant 2 x 1.00 cum with accessories ( 15 Cum/hr) | Each | 3528615 | |||||||||||||||||||||||||
11 | Batching plant 2 x 1.50 cum with accessories ( 50 Cum/hr) | Each | 5403066 | |||||||||||||||||||||||||
12 | Bending machine | Each | 480414 | |||||||||||||||||||||||||
13 | Clamp shell and hoisting ropes | Each | 27198 | |||||||||||||||||||||||||
14 | Concrete bucket 1.5 cum | Each | 46549 | |||||||||||||||||||||||||
15 | Concrete hand mixer 45/30 ltr | Each | 12884 | |||||||||||||||||||||||||
16 | Concrete mixer 300/200 ltr(diesel) | Each | 124688 | |||||||||||||||||||||||||
17 | Concrete mixer 300/200 ltr ( electric ) | Each | 120530 | |||||||||||||||||||||||||
18 | Concrete mixer 600/400 ltr(diesel) | Each | 216120 | |||||||||||||||||||||||||
19 | Concrete mixer 600/400 ltr ( electric ) | Each | 211962 | |||||||||||||||||||||||||
20 | Concrete paver 100 Sqm / hr | Each | 1962563 | |||||||||||||||||||||||||
21 | Convey mucker ( excluding tyres ) | Each | 3204429 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
22 | Core drilling machine | Each | 914360 | |||||||||||||||||||||||||
23 | Diesel generating set 30 KVA | Each | 411459 | |||||||||||||||||||||||||
24 | Diesel generating set 50 KVA | Each | 531989 | |||||||||||||||||||||||||
25 | Diesel Loco 45 hp | Each | 1762228 | |||||||||||||||||||||||||
26 | Dewatering pump 5 hp diesel | Each | 33246 | |||||||||||||||||||||||||
27 | Dewatering pump 5 hp electric | Each | 20362 | |||||||||||||||||||||||||
28 | Dewatering pump 10 hp diesel | Each | 49879 | |||||||||||||||||||||||||
29 | Dewatering pump 10 hp electric | Each | 45721 | |||||||||||||||||||||||||
30 | Dewatering pump 20 hp diesel | Each | 157934 | |||||||||||||||||||||||||
31 | Dewatering pump 20 hp electric | Each | 83126 | |||||||||||||||||||||||||
32 | Drifter | Each | 879449 | |||||||||||||||||||||||||
33 | Drilling jumbo ( excluding tyres ) | Each | 1082277 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
34 | Dumper 4.5 cum ( excluding tyres ) | Each | 1205299 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
35 | Geophysical Ele.resistivity meter | Each | 444194 | |||||||||||||||||||||||||
36 | Grouting pump | Each | 84791 | |||||||||||||||||||||||||
37 | Guniting / sand blasting equipment | Each | 253800 | |||||||||||||||||||||||||
38 | Ice plant with accessories 30 t / day | Each | 2132135 | |||||||||||||||||||||||||
39 | Jack hammer | Each | 54027 | |||||||||||||||||||||||||
40 | Needle vibrator 40 mm petrol | Each | 16623 | |||||||||||||||||||||||||
41 | Needle vibrator 40 mm electric | Each | 17461 | |||||||||||||||||||||||||
42 | Needle vibrator 60 mm petrol | Each | 17870 | |||||||||||||||||||||||||
43 | Needle vibrator 60 mm electric | Each | 21200 | |||||||||||||||||||||||||
44 | Planing machine 4 m stroke | Each | 707027 | |||||||||||||||||||||||||
45 | Plate shearing machine up to 12 mm | Each | 385242 | |||||||||||||||||||||||||
46 | Pneumatic placer 0.5 cum | Each | 482120 | |||||||||||||||||||||||||
47 | Pneumatic tamper | Each | 70651 | |||||||||||||||||||||||||
48 | Pug cutting machine | Each | 14508 | |||||||||||||||||||||||||
49 | Pusher leg | Each | 47131 | |||||||||||||||||||||||||
50 | Road roller diesel 10 t | Each | 706557 | |||||||||||||||||||||||||
51 | Shovel 0.50 cum 75 hp | Each | 3117156 | |||||||||||||||||||||||||
52 | Shovel 0.85 cum 110 hp | Each | 5303318 | |||||||||||||||||||||||||
53 | Stationery derrick crane 5 t | Each | 542799 | |||||||||||||||||||||||||
54 | Tipper 5 cum ( excluding tyres ) | Each | 1350769 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
55 | Tipping tub 1.5 cum | Each | 199497 | |||||||||||||||||||||||||
56 | Tower crane 5 tonne | Each | 6213520 | |||||||||||||||||||||||||
57 | Transformer 250 KVA | Each | 433395 | |||||||||||||||||||||||||
58 | Truck 10 t ( excluding tyres ) | Each | 1226081 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
59 | Truck mounted derrick crane 5 t ( excluding tyres | Each | 1629233 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
60 | Upright drilling machine | Each | 46549 | |||||||||||||||||||||||||
61 | Ventilation fan 20 hp | Each | 235676 | |||||||||||||||||||||||||
62 | Vibratory pad foot roller 8 t | Each | 2452162 | |||||||||||||||||||||||||
63 | Wagon drill | Each | 540306 | |||||||||||||||||||||||||
64 | Water tanker 8000 ltr (excluding tyres) | Each | 1329773 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 71488 | |||||||||||||||||||||||||||
65 | Welding set | Each | 43218 | |||||||||||||||||||||||||
66 | Winch 35 hp electric | Each | 311721 | |||||||||||||||||||||||||
67 | Hydraulic Truck Crane 30T | Each | 12039897 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 153960 | |||||||||||||||||||||||||||
68 | Hydraulic Truck Crane 16T | Each | 8637319 | |||||||||||||||||||||||||
tyres and tubes 6 sets | 153960 | |||||||||||||||||||||||||||
69 | Heavy Duty Airless Spray Painting Equipment | Each | 405451 | |||||||||||||||||||||||||
70 | Concrete Placer Pump(25 Cum/hr)(Electric) | Each | 2829905 |
ACCESSORIES TO MACHINERY / EQUIPMENT FOR THE YEAR : 2019-20
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019- 20 |
||||||||||||||||||||||||||||||||||||||||
1 | 2 | 3 | 4 | ||||||||||||||||||||||||||||||||||||||||
1 | Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor | Each | These items are no where being used in the Standard Data. Hence this may be deleted from SoR | ||||||||||||||||||||||||||||||||||||||||
2 | Jaw crusher 500 x 300 mm ( 60 tph ) with 30 hp motor | Each | |||||||||||||||||||||||||||||||||||||||||
3 | Jaw crusher 400 x 225 mm ( 10 tph ) with 25 hp motor | Each | |||||||||||||||||||||||||||||||||||||||||
4 | Jaw plates 900 x 500 mm ( serreted ) | Set | |||||||||||||||||||||||||||||||||||||||||
5 | Jaw plates 500 x 300 mm ( serreted ) | Set | |||||||||||||||||||||||||||||||||||||||||
6 | Jaw plates 400 x 225 mm ( serreted ) | Set | |||||||||||||||||||||||||||||||||||||||||
7 | Nylon Conveyor belt 3 ply 600 mm width | Rm | |||||||||||||||||||||||||||||||||||||||||
8 |
Nylon Conveyor belt 3 ply 1000 mm width | Rm |
ACCESSORIES TO MACHINERY / EQUIPMENT FOR THE YEAR : 2019-20:
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | |||||||||||||||||||||||||||||||
1 | 2 | 3 | 4 | |||||||||||||||||||||||||||||||
1 | Casing shoe bit | Each | 10480 | |||||||||||||||||||||||||||||||
2 | Diamond core bit BX size | Each | 10580 | |||||||||||||||||||||||||||||||
3 | Diamond core bit NX size | Each | 12700 | |||||||||||||||||||||||||||||||
4 | Double tube core barrel | Each | 13540 | |||||||||||||||||||||||||||||||
5 | Extension drill rod with coupling sleeve | Rm | 1921 | |||||||||||||||||||||||||||||||
6 | Jack hammer drill rod 1.5 m | Each | 3647 | |||||||||||||||||||||||||||||||
7 | Jack hammer drill rod 2.5 m | Each | 5670 | |||||||||||||||||||||||||||||||
8 | Nozzle for Guniting / sand blasting gun | Each | 633 | |||||||||||||||||||||||||||||||
9 | Paving Cylinder | Each | 28030 | |||||||||||||||||||||||||||||||
10 | Rails 30R ( 30 kg / m ) | tonne | 51400 | |||||||||||||||||||||||||||||||
11 | Reamer shell | Each | 5140 | |||||||||||||||||||||||||||||||
12 | T.C. Cross bit 50 mm dia | Each | 4990 | |||||||||||||||||||||||||||||||
13 | T.C. Cross bit 75 mm dia | Each | 9980 | |||||||||||||||||||||||||||||||
14 | T.C. Cross bit 100 mm dia | Each | 11980 | |||||||||||||||||||||||||||||||
15 | Tyres and Tubes for truck | Set | 14580 | |||||||||||||||||||||||||||||||
16 | Wire rope 16 mm dia | Rm | 260 | |||||||||||||||||||||||||||||||
17 | Excavation of drain with Excavator | cum | 38 |
AGGREGATE CRUSHING & PROCESSING PLANT FOR THE YEAR : 2019-20:
OTHER COSTS ON MATERIAL/MACHINERY/EQUIPEMENT FOR THE YEAR:2019-20:
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019- 20 |
|||||||||||||||||||||||||||||||||||||||
1 | 2 | 3 | 4 | |||||||||||||||||||||||||||||||||||||||
1 | Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor | Each | These items are no where being used in the Standard Data. Hence this may be deleted from SoR | |||||||||||||||||||||||||||||||||||||||
2 | Jaw crusher 500 x 300 mm ( 60 tph ) with 30 hp motor | Each | ||||||||||||||||||||||||||||||||||||||||
3 | Jaw crusher 400 x 225 mm ( 10 tph ) with 25 hp motor | Each | ||||||||||||||||||||||||||||||||||||||||
4 | Jaw plates 900 x 500 mm ( serreted ) | Set | ||||||||||||||||||||||||||||||||||||||||
5 | Jaw plates 500 x 300 mm ( serreted ) | Set | ||||||||||||||||||||||||||||||||||||||||
6 | Jaw plates 400 x 225 mm ( serreted ) | Set | ||||||||||||||||||||||||||||||||||||||||
7 | Nylon Conveyor belt 3 ply 600 mm width | Rm | ||||||||||||||||||||||||||||||||||||||||
8 | Nylon Conveyor belt 3 ply 1000 mm width | Rm |
Other Costs On Material/Machinery/Equipment
1. The rate provided for ' SUNDRIES' (Lump sum provision for unquantified inputs in the datarates) shall be updated on the basis of general percentage increase / decrease in the market rates or on the basis of R.B.I ' All Commodity' index.
2 .The rate for structural steel fabrication shall include cost of all materials (exceptstructural steel), machinery, labour and one coat of primer painting.
3. Demand charges and electric power charges shall be as per prevailing APEPDCL tariff.
4. Rate of interest on capital cost shall be as approved by Govt or other competent authority.
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | ||||||||||||||||||||||
1 | 2 | 3 | 4 | ||||||||||||||||||||||
1 | Air hose 25 mm dia | Rm | 164 | ||||||||||||||||||||||
2 | Air hose 50 mm dia | Rm | 254 | ||||||||||||||||||||||
3 | Demand charges (HT-I : General-11 KV category) on power supply(as per APEPDCL tariff) | KVA / month |
475 | ||||||||||||||||||||||
4 | Diesel | Ltr | 76 | ||||||||||||||||||||||
5 | Electric power (HT-VIII Category) including tax ( 1.5 times of the Tariff of HT-I(A):General-11 KVA Category) (as per APEPDCL tariff) | Kwhr | 10 | ||||||||||||||||||||||
6 | Excise duty on Gates / Hoist supplies | % | 0% | ||||||||||||||||||||||
7 | Insurance charges on machinery | % / annum | 1% | ||||||||||||||||||||||
8 | Interest on capital cost | % / annum | 11.00% | ||||||||||||||||||||||
9 | Lubricants | Ltr | 220 | ||||||||||||||||||||||
10 | Petrol | Ltr | 84 | ||||||||||||||||||||||
11 | Rivets | Kg | 85 | ||||||||||||||||||||||
12 | Road tax on transport vehicles | Rs./annum | As per RTA | ||||||||||||||||||||||
13 | Shalimatic sealing compound | Kg | 85 | ||||||||||||||||||||||
14 | Shutter oil | Ltr | 44 | ||||||||||||||||||||||
15 | Structural steel fabrication | Kg | 28 | ||||||||||||||||||||||
16 | Sundries ( Lump sum for un quantified inputs ) | LS | 31 | ||||||||||||||||||||||
17 | Water hose ( pressure ) 20 mm dia | Rm | 164 | ||||||||||||||||||||||
18 | Steel wedges | LS | 15 | ||||||||||||||||||||||
19 | Elbows / Nipple / Plugs etc., | LS | 15 | ||||||||||||||||||||||
20 | Soldering materials | LS | 15 | ||||||||||||||||||||||
21 | Steam circulation arrangement | LS | 15 | ||||||||||||||||||||||
22 | Fuel charges ( gas for heating ) | LS | 17 | ||||||||||||||||||||||
23 | Vulcanizing materials | LS | 18 | ||||||||||||||||||||||
24 | Other accessories / controls / junctions | LS | Deleted | ||||||||||||||||||||||
25 | Miscellaneous fittings / switches etc | LS | Deleted | ||||||||||||||||||||||
26 | Anchors / supports for cables / lights | LS | Deleted | ||||||||||||||||||||||
27 | Civil works for foundations / pedestals / duct etc | LS | Deleted | ||||||||||||||||||||||
28 | Gas cutting set ( 2 No’s 15 m hose and nozzle | Each | 12797 | ||||||||||||||||||||||
29 | Grease | Kg | 243 | ||||||||||||||||||||||
30 | Welding holder set ( cable / holder / gloves / mask | Each | 6884 | ||||||||||||||||||||||
31 | Use rate of ropes | LS | 156 |
MATERIALS FOR GATES AND HOISTS FOR THE YEAR : 2019-20:
Sl No. | DESCRIPTION OF MATERIAL | UNIT | Rate Proposed by ENC(IW) for the year 2019-20 | |||||||||||||||||||||||||||||||
1 | Worm reducers | Each | 177990 | |||||||||||||||||||||||||||||||
2 | Electric motor 20 hp(Double Shaft) | Each | 96009 | |||||||||||||||||||||||||||||||
3 | Electric motor 17.5 hp(Double Shaft) | Each | 68055 | |||||||||||||||||||||||||||||||
4 | Electric motor 12.5 hp(Double Shaft) | Each | 57583 | |||||||||||||||||||||||||||||||
5 | Electric motor 5 hp(Double Shaft) | Each | 26176 | |||||||||||||||||||||||||||||||
6 | Electric motor 3 hp (Double Shaft) | Each | 18319 | |||||||||||||||||||||||||||||||
7 | Electric motor 2 hp (Double Shaft) | Each | 10002 | |||||||||||||||||||||||||||||||
8 | Floating shaft 300 mm dia | Kg | 153 | |||||||||||||||||||||||||||||||
9 | Manual operating system | Each | 26809 | |||||||||||||||||||||||||||||||
10 | Gate position indicator | Each | 161899 | |||||||||||||||||||||||||||||||
11 | Ele-magnetic brake | Each | 27923 | |||||||||||||||||||||||||||||||
12 | Electric cable / switch / control panel etc | LS | 45425 | |||||||||||||||||||||||||||||||
13 | Wire rope sockets | Each | 4393 |
Materials other than covered under WR Workitems For the year 2019-20
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1. Average of the prevailing market rates, ignoring freak rates, is the criteria forFixing market rates for materials.
2 .The rates for materials is inclusive of GST, duties and other local levies.
3 .The rates for materials are exclusive of Seigniorage charges wherever applicable.
4 .The rates for materials, except those for which lead charges are admissible as per the Statement of lead charges is for all leads.
Sl. No. | Description | Rate Proposed by ENC(IW) for the year 2019-20 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 4 | ||||||||||||||||||||||||||||||||||||
M-002 | Quarried stone 150 - 200 mm size for Hand Broken | 145 | ||||||||||||||||||||||||||||||||||||
M-003 | Boulder with minimum size of 300 mm for Pitching | 160 | ||||||||||||||||||||||||||||||||||||
M-004 | Coarse sand for filling | Rate as per item no.27(b) of material of WRD | ||||||||||||||||||||||||||||||||||||
M-005 | Coarse sand for mortar | Rate as per item no.27(a) of material of WRD | ||||||||||||||||||||||||||||||||||||
M-006 | Fine Sand | Rate as per item no.28 of material of WRD | ||||||||||||||||||||||||||||||||||||
M-007 | Murrum | Rate as per item no.56 of Material rates of WRD. | ||||||||||||||||||||||||||||||||||||
M-008 | Gravel/Quarry spall | 113 | ||||||||||||||||||||||||||||||||||||
M-009 | Granular Material or hard Murrum for GSB works | Deleted | ||||||||||||||||||||||||||||||||||||
M-010 | Granular Material or hard Murrum for GSB works | 95 | ||||||||||||||||||||||||||||||||||||
M-011 | Fly ash conforming to IS: 3812 ( Part II & I) | 64 | ||||||||||||||||||||||||||||||||||||
For item No.M-012 to M-055 the note shall be as follows 1) The rates mentioned are exclusive of Seigniorage charges but inclusive of blasting charges of Rs.70/cum and 25% machine crushing charges. However, if the metal is obtained by hand broken, machine crushing charges shall be deducted. 2) If the material is obtained by hand broken from surface boulders/canal spoil, the blasting and crushing charges shall be deducted. 3)The material shall be HB Stone of Granite, Dolamite, Dolerite and Trap.(Quartzite and Basalt with aggregate impact of less than 20) |
||||||||||||||||||||||||||||||||||||||
M-012 | Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) | 335 | ||||||||||||||||||||||||||||||||||||
M-013 | Close graded Granular sub-base Material 53 mm to 9.5 mm |
650 | ||||||||||||||||||||||||||||||||||||
M-014 | Close graded Granular sub-base Material 37.5 mm to 9.5 mm |
670 | ||||||||||||||||||||||||||||||||||||
M-015 | Close graded Granular sub-base Material 26.5 mm to 9.5 mm |
709 | ||||||||||||||||||||||||||||||||||||
M-016 | Close graded Granular sub-base Material 9.5 mm to 4.75 mm |
590 | ||||||||||||||||||||||||||||||||||||
M-017 | Close graded Granular sub-base Material 9.5 mm to 2.36 mm |
580 | ||||||||||||||||||||||||||||||||||||
M-018 | Close graded Granular sub-base Material 4.75mm to 2.36 mm |
510 | ||||||||||||||||||||||||||||||||||||
M-019 | Close graded Granular sub-base Material 4.75mm to 75 micron mm. | 485 | ||||||||||||||||||||||||||||||||||||
M-020 | Close graded Granular sub-base Material 2.36 mm | 485 | ||||||||||||||||||||||||||||||||||||
M-021 | Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. | 350 | ||||||||||||||||||||||||||||||||||||
M-022 | Coarse graded Granular sub-base Material 2.36 mm & below |
430 | ||||||||||||||||||||||||||||||||||||
M-023 | Coarse graded Granular sub-base Material 4.75mm to 75 micron mm | 465 | ||||||||||||||||||||||||||||||||||||
M-024 | Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm | 465 | ||||||||||||||||||||||||||||||||||||
M-025 | Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm |
565 | ||||||||||||||||||||||||||||||||||||
M-026 | Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm | 618 | ||||||||||||||||||||||||||||||||||||
M-027 | Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm | 619 | ||||||||||||||||||||||||||||||||||||
M-028 | Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm | 684 | ||||||||||||||||||||||||||||||||||||
M-029 | Coarse graded Granular sub-base Material 53 mm to 26 .5mm | 848 | ||||||||||||||||||||||||||||||||||||
M-030 | Aggregates below 5.6 mm | 557 | ||||||||||||||||||||||||||||||||||||
M-031 | Aggregates 22.4 mm to 2.36 mm | 911 | ||||||||||||||||||||||||||||||||||||
M-032 | Aggregates 22.4 mm to 5.6 mm | 1037 | ||||||||||||||||||||||||||||||||||||
M-033 | Aggregates 45 mm to 2.8 mm | 660 | ||||||||||||||||||||||||||||||||||||
M-034 | Aggregates 45 mm to 22.4 mm | Cum | Rate as per item no.9 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-035 | Aggregates 53 mm to 2.8 mm | Cum | 911 | |||||||||||||||||||||||||||||||||||
M-036 | Aggregates 53 mm to 22.4 mm | Cum | 860 | |||||||||||||||||||||||||||||||||||
M-037 | Aggregates 63 mm to 2.8 mm | Cum | 705 | |||||||||||||||||||||||||||||||||||
M-038 | Aggregates 63 mm to 45 mm | Cum | 655 | |||||||||||||||||||||||||||||||||||
M-039 | Aggregates 90 mm to 45 mm | Cum | Rate as per item no.10 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-040 | Aggregates 10 mm to 5 mm | Cum | Rate as per item no.7 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-041 | Aggregates 11.2 mm to 0.09 mm | Cum | 700 | |||||||||||||||||||||||||||||||||||
M-042 | Aggregates 13.2 mm to 0.09 mm | Cum | 795 | |||||||||||||||||||||||||||||||||||
M-043 | Aggregates 13.2 mm to 5.6 mm | Cum | 915 | |||||||||||||||||||||||||||||||||||
M-044 | Aggregates 13.2 mm to 10 mm | Cum | 1020 | |||||||||||||||||||||||||||||||||||
M-045 | Aggregates 20 mm to 10 mm | Cum | Rate as per item no.8 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-046 | Aggregates 25 mm to 10 mm | Cum | 1120 | |||||||||||||||||||||||||||||||||||
M-047 | Aggregates 19 mm to 6 mm | Cum | 1035 | |||||||||||||||||||||||||||||||||||
M-048 | Aggregates 37.5 mm to 19 mm | Cum | 1095 | |||||||||||||||||||||||||||||||||||
M-049 | Aggregates 37.5 mm to 25 mm | Cum | 1135 | |||||||||||||||||||||||||||||||||||
M-050 | Aggregates 6 mm nominal size | Cum | 725 | |||||||||||||||||||||||||||||||||||
M-051 | Aggregates 10 mm nominal size | Cum | 920 | |||||||||||||||||||||||||||||||||||
M-052 | Aggregates 13.2/12.5 mm nominal size | Cum | 1080 | |||||||||||||||||||||||||||||||||||
M-053 | Aggregates 20 mm nominal size | Cum | 1340 | |||||||||||||||||||||||||||||||||||
M-054 | Aggregates 25 mm nominal size | Cum | 1290 | |||||||||||||||||||||||||||||||||||
Part I - Materials not covered under WR Work items basic data – Common SoR 2019-20 | ||||||||||||||||||||||||||||||||||||||
M-055 | Aggregates 40 mm nominal size | Cum | 830 | |||||||||||||||||||||||||||||||||||
M-056 | AC pipe 100 mm dia | Metre | Rate as per PH item | |||||||||||||||||||||||||||||||||||
M-057 | Acrylic polymer bonding coat | Litre | 465 | |||||||||||||||||||||||||||||||||||
M-058 | Aluminum Paint | Litre | 265 | |||||||||||||||||||||||||||||||||||
M-059 | Aluminum alloy plate 2mm Thick | Sqm | 335 | |||||||||||||||||||||||||||||||||||
M-060 | Aluminum alloy/Galvanized steel | Tonne | 61,250 | |||||||||||||||||||||||||||||||||||
M-061 | Aluminum sheeting fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling |
Sqm | 835 | |||||||||||||||||||||||||||||||||||
M-062 | Aluminum studs 100 x 100 mm fitted with lens reflectors | No’s | As per local market rate | |||||||||||||||||||||||||||||||||||
M-063 | Barbed wire | K | 70 | |||||||||||||||||||||||||||||||||||
M-064 | Bearing (Cost of parts) | No’s | 500 | |||||||||||||||||||||||||||||||||||
M-065 | Bearing (Cast steel rocker bearing assembly of 250 tonne ) | No’s | 690 | |||||||||||||||||||||||||||||||||||
M-066 | Bearing (Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the |
Cm3 | As per Market Competitive rates. | |||||||||||||||||||||||||||||||||||
M-067 | Bearing (Forged steel roller bearing of 250 tonne) | No’s | ||||||||||||||||||||||||||||||||||||
M-068 | Bearing (Pot type bearing assembly consisting of a metal piston supported by a disc, PTFE pads providing sliding surfaces against stainless steel mating together with cast steel assemblies/fabricated structural steel assemblies duly painted with all components | No’s | ||||||||||||||||||||||||||||||||||||
M-069 | Bearing (PTFE sliding plate bearing assembly of 80 tonnes ) | No’s | ||||||||||||||||||||||||||||||||||||
M-070 | Bearing (Supply of sliding plate bearing of 80 | No’s | ||||||||||||||||||||||||||||||||||||
M-071 | Bentonite | K | 7.0 | |||||||||||||||||||||||||||||||||||
M-072 | Binding wire | K g |
Rate as per item no.3 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-073 | Bitumen ( Cationic Emulsion ) | Tonne | As per rates fixed by R&B Dept based on refinery rates | |||||||||||||||||||||||||||||||||||
M-074 | Bitumen (60-70 grade) | Tonne | ||||||||||||||||||||||||||||||||||||
M-075 | Bitumen (80-100 grade ) | Tonne | ||||||||||||||||||||||||||||||||||||
Part I - Materials not covered under WR Work items basic data – Common SoR 2019-20 | ||||||||||||||||||||||||||||||||||||||
M-076 | Bitumen (Cutback ) | Tonne | As per rates fixed by R&B Dept based on refinery rates | |||||||||||||||||||||||||||||||||||
M-077 | Bitumen (emulsion) | Tonne | ||||||||||||||||||||||||||||||||||||
M-078 | Bitumen (modified graded) | Tonne | ||||||||||||||||||||||||||||||||||||
M-079 | Brick | Each | As per Building SSR | |||||||||||||||||||||||||||||||||||
M-080 | C.I. shoes for the pile | Kg | 50 | |||||||||||||||||||||||||||||||||||
M-081 | Cement | Tonne | Rate as per item no.5 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
M-082 | Cold twisted bars (HYSD/TMT Bars) | Tonne | Rate as per item no.62 of Material rates of WRD | |||||||||||||||||||||||||||||||||||
M-083 | Collar for joints 300 mm dia | No’s | 133 | |||||||||||||||||||||||||||||||||||
M-084 | Compressible Fibre Board(20mm thick) | Sqm | 490 | |||||||||||||||||||||||||||||||||||
M-085 | Connectors/ Staples | Each | 67 | |||||||||||||||||||||||||||||||||||
M-086 | Copper Plate(12m long x 250mmwide) | Kg | 265 | |||||||||||||||||||||||||||||||||||
M-087 | Corrosion resistant Structural steel | Tonne | 51645 | |||||||||||||||||||||||||||||||||||
M-088 | Corrugated sheet, 3 mm thick, "Tie" beam section | Kg | 181 | |||||||||||||||||||||||||||||||||||
M-089 | Credit for excavated rock found suitable for | Cum | 202 | |||||||||||||||||||||||||||||||||||
M-090 | Curing compound | Liter | 105 | |||||||||||||||||||||||||||||||||||
M-091 | Delineators from ISI certified firm as per the standard drawing given in IRC - 79 | Each | As per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-092 | Earth Cost or compensation for earth taken from | Cum | 60 | |||||||||||||||||||||||||||||||||||
M-093 | Elastomeric slab seal expansion joint assembly manufactured by using chloroprene, elastomer for elastomeric slab unit |
Metre | As per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-094 | Electric Detonators @ 1 detonator for 1/2 gelatin stick | 100 no’s | Rate as per item No. 21 of WRD | |||||||||||||||||||||||||||||||||||
M-095 | Epoxy compound with accessories for preparing | Kg | 290 | |||||||||||||||||||||||||||||||||||
M-096 | Epoxy mortar | Kg | 95 | |||||||||||||||||||||||||||||||||||
M-097 | Epoxy primer | Kg | 496 | |||||||||||||||||||||||||||||||||||
M-098 | Epoxy resin-hardener mix for prime coat | Kg | 512 | |||||||||||||||||||||||||||||||||||
M-099 | Flag of red color cloth 600 x 600 mm | Each | 25 | |||||||||||||||||||||||||||||||||||
M-100 | Flowering Plants | 42 | ||||||||||||||||||||||||||||||||||||
M-101 | Galvanized MS flat clamp | 172 | ||||||||||||||||||||||||||||||||||||
M-102 | Galvanized steel wire crates of mesh size 100 mm x 100 mm woven with 4mm dia. GI wire in rolls of required size. |
159 | ||||||||||||||||||||||||||||||||||||
M-103 | Galvanized structural steel plate 200 mm wide, 6 mm | 820 | ||||||||||||||||||||||||||||||||||||
M-104 | Gelatin 80% | 59 | ||||||||||||||||||||||||||||||||||||
M-105 | Geo grids | As per local competitive quotations | ||||||||||||||||||||||||||||||||||||
M-106 | (a)Geo membrane 500 micron thick | Rate as per item No. 52 of WRD | ||||||||||||||||||||||||||||||||||||
(b) Geo membrane 750 micron thick | Rate as per item No. 53 of WRD | |||||||||||||||||||||||||||||||||||||
(c) Geo membrane 1000 micron thick | Rate as per item No. 54 of WRD | |||||||||||||||||||||||||||||||||||||
M-107 | Geo nets | As per local competitive quotations | ||||||||||||||||||||||||||||||||||||
M-108 | (a)Geo textile 160 gsm | Rate as per item No. 29 of WRD | ||||||||||||||||||||||||||||||||||||
(b) Geo textile 200 gsm | Rate as per item No. 30 of WRD | |||||||||||||||||||||||||||||||||||||
(c) Geo textile 250 gsm | Rate as per item No. 31 of WRD | |||||||||||||||||||||||||||||||||||||
M-109 | Geo textile filter fabric | As per local competitive quotations | ||||||||||||||||||||||||||||||||||||
M-110 | GI bolt 10 mm Dia | 19 | ||||||||||||||||||||||||||||||||||||
M-111 | Grouting pump with agitator | Rate covered in Item No.36 of hire charges of machinery of Water Resources work items | ||||||||||||||||||||||||||||||||||||
M-112 | Grass (Doob) | 6 | ||||||||||||||||||||||||||||||||||||
M-113 | Grass (Fine) | 8 | ||||||||||||||||||||||||||||||||||||
M-114 | HDPE pipes 75mm dia | Rate as per PH items | ||||||||||||||||||||||||||||||||||||
M-115 | HDPE pipes 90mm dia | |||||||||||||||||||||||||||||||||||||
M-116 | Hedge plants | Each | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-117 | Helical pipes 600mm diameter | Metre | ||||||||||||||||||||||||||||||||||||
M-118 | Hot applied thermoplastic compound | Litre | ||||||||||||||||||||||||||||||||||||
M-119 | HTS strand | Tonne | 36,265 | |||||||||||||||||||||||||||||||||||
M-120 | Joint Sealant Compound | Kg | 60 | |||||||||||||||||||||||||||||||||||
M-121 | Jute netting, open weave, 2.5 cm square opening for seeding and Mulching | Sqm | 79 | |||||||||||||||||||||||||||||||||||
M-122 | LDO for steam curing | Litre | 59 | |||||||||||||||||||||||||||||||||||
M-123 | M.S. Clamps | Kg | Deleted | |||||||||||||||||||||||||||||||||||
M-124 | M.S. Clamps | Kg | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-125 | M.S. shoes @ 35 Kg per pile of 15 m | Kg | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-126 | Mild Steel bars | Tonne | 40,470 | |||||||||||||||||||||||||||||||||||
M-127 | Modular strip/box seal expansion joint including anchorage catering to a horizontal movement beyond 70 mm and up to 140mm assembly comprising of edge beams, central beam,2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorized | Metre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-128 | Modular strip/box seal expansion joint catering to a horizontal movement beyond 140mm and up to 210mm box/box seal joint assembly containing 3 modules/cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorized representative | Metre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-129 | Nipples 12mm | No’s | 18 | |||||||||||||||||||||||||||||||||||
M-130 | Nuts and bolts | Kg | 89 | |||||||||||||||||||||||||||||||||||
M-131 | Paint | Litre | 206 | |||||||||||||||||||||||||||||||||||
M-132 | Pavement Marking Paint | Litre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-133 | Paving Fabric | Sqm | ||||||||||||||||||||||||||||||||||||
M-134 | Perforated geo synthetic pipe 150 mm dia | Metre | ||||||||||||||||||||||||||||||||||||
M-135 | Perforated pipe of cement concrete, internal dia 100 mm | Metre | ||||||||||||||||||||||||||||||||||||
M-136 | Pesticide | Kg | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-137 | R.C.C Pipes 200 mm dia, 2.5 m long for drainage | Metre | Rate as per PH item | |||||||||||||||||||||||||||||||||||
M-138 | Plastic sheath, 1.25 mm thick for dowel bars | Sqm | 49 | |||||||||||||||||||||||||||||||||||
M-139 | Plastic tubes 50 cm dia , 1.2 m high | No’s | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-140 | Polymer braids | Metre | ||||||||||||||||||||||||||||||||||||
M-141 | Pre moulded Joint filler, 25 mm thick for expansion joint. | Sqm | 273 | |||||||||||||||||||||||||||||||||||
M-142 | Pre-coated stone chips of 13.2 mm nominal size | Cum | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-143 | Preformed continuous chloroprene elastomer or closed cell foam sealing element with high tear strength, vulcanized in a single operation for the full length of a joint to ensure water tightness. | Metre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-144 | Pre-moulded asphalt filler board | Sqm | ||||||||||||||||||||||||||||||||||||
M-145 | Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days | Kg | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-146 | Sealant Primer | Kg | 154 | |||||||||||||||||||||||||||||||||||
M-147 | Quick setting compound | Kg | 28 | |||||||||||||||||||||||||||||||||||
M-148 | Random Rubble Stone | Cum | 250 | |||||||||||||||||||||||||||||||||||
M-149 | RCC Pipe NP 4 heavy duty non pressure pipe 1000 mm dia | Metre | Rate as per PH items | |||||||||||||||||||||||||||||||||||
M-150 | RCC Pipe NP 4 heavy duty non pressure pipe 1200 mm dia | Metre | ||||||||||||||||||||||||||||||||||||
M-151 | RCC Pipe NP 4 heavy duty non pressure pipe 300 mm dia | Metre | ||||||||||||||||||||||||||||||||||||
M-152 | Reflectorising glass beads | Kg | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-153 | Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper Strips) | Metre | ||||||||||||||||||||||||||||||||||||
M-154 | Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanized carbon steel strips) | Metre | ||||||||||||||||||||||||||||||||||||
M-155 | Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass reinforced polymer/ fiber reinforced polymer/polymeric strips) | Metre | ||||||||||||||||||||||||||||||||||||
M-156 | Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless steel strips) | Metre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-157 | Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Aluminum strips) | Metre | ||||||||||||||||||||||||||||||||||||
M-158 | Rivets | Each | 6 | |||||||||||||||||||||||||||||||||||
M-159 | Sand bags (Cost of sand and Empty cement bag) | Per bag | Rate as per Item no.2 of miscellaneous items | |||||||||||||||||||||||||||||||||||
M-160 | Sapling 2 m high 25 mm dia | Each | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-161 | Scrap tyres of size 900 x 20 | No’s | 70 | |||||||||||||||||||||||||||||||||||
M-162 | Seeds(Grass) | Kg | 18 | |||||||||||||||||||||||||||||||||||
M-163 | Cost of Selected earth | Cum | Rate as per Item No. M-092 |
|||||||||||||||||||||||||||||||||||
M-164 | Separation Membrane of impermeable plastic sheeting 125 micron thick | Sqm | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-165 | Sheathing duct | Metre | ||||||||||||||||||||||||||||||||||||
M-166 | Shrubs | Each | 15 | |||||||||||||||||||||||||||||||||||
M-167 | Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing | Cum | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-168 | Sodium vapour lamp | Each | As per Building SSR | |||||||||||||||||||||||||||||||||||
M-169 | Square Rubble Coursed Stone | Cum | 2,195 | |||||||||||||||||||||||||||||||||||
M-170 | Steel circular hollow pole of standard specification for street lighting to mount light at 5 m height above deck level | Each | Rate to be obtained from Electricity/Municipal Departments | |||||||||||||||||||||||||||||||||||
M-171 | Steel circular hollow pole of standard specification for street lighting to mount light at 9 m height above road level | Each | ||||||||||||||||||||||||||||||||||||
M-172 | Steel drum 300 mm dia 1.2 m high/empty bitumen drum | No’s | As per local competitive market rate | |||||||||||||||||||||||||||||||||||
M-173 | Steel helmet and cushion block on top of pile head during driving. | Kg | ||||||||||||||||||||||||||||||||||||
M-174 | Steel pipe 25 mm external dia as per | IS:1239 | Metre | 254 | ||||||||||||||||||||||||||||||||||
M-175 | Steel pipe 50 mm external dia as per | IS:1239 | Metre | 495 | ||||||||||||||||||||||||||||||||||
M-176 | Steel wire rope 20 mm | Kg | 164 | |||||||||||||||||||||||||||||||||||
M-177 | Steel wire rope 40 mm | Kg | 187 | |||||||||||||||||||||||||||||||||||
M-178 | Strip seal expansion joint | Metre | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-179 | Structural Steel(HYSD/TMT bars) | Tonne | Rate as per item no.62 of Material rates of WRD | |||||||||||||||||||||||||||||||||||
M-180 | Super plasticizer admixture IS marked as per 9103- 1999 | Kg | Rate as per item no.70 of Material rates of WRD | |||||||||||||||||||||||||||||||||||
M-181 | Synthetic Geo grids as per clause 3102.8 and approved design and specifications. | Sqm | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-182 | Through and bond stone (a) 20X20x30 to 45 cm long |
Each | Rate as per item no.75 of Material rates of WRD. | |||||||||||||||||||||||||||||||||||
Through and bond stone (b) 25X25x45 to 60 cm long |
Each | Rate as per item no.76 of Material rates of WRD. | ||||||||||||||||||||||||||||||||||||
Through and bond stone (c) 30X30x65 to 75 cm long |
Each | Rate as per item no.77 of Material rates of WRD. | ||||||||||||||||||||||||||||||||||||
M-183 | Tie rods 20mm diameter | No’s | 48 | |||||||||||||||||||||||||||||||||||
M-184 | Tiles size 300 x 300 mm and 25 mm thick | Each | As per Building SSR | |||||||||||||||||||||||||||||||||||
M-185 | Timber | Cum | ||||||||||||||||||||||||||||||||||||
M-186 | Traffic cones with 150 mm reflective sleeve | No’s | Rate as per local competitive quotations | |||||||||||||||||||||||||||||||||||
M-187 | Tube anchorage set complete with bearing plate, permanent wedges etc | No’s | ||||||||||||||||||||||||||||||||||||
M-188 | Un slaked lime | Tonne | 2598 | |||||||||||||||||||||||||||||||||||
M- 189(a) | Water charges(Urban) | KiloLitre | 107 | |||||||||||||||||||||||||||||||||||
(b) | Water charges(Rural) | KiloLitre | 80 | |||||||||||||||||||||||||||||||||||
M-190 | Water based cement paint | Litre | As per Building SSR | |||||||||||||||||||||||||||||||||||
M-191 | Welded steel wire fabric | Kg | 135 | |||||||||||||||||||||||||||||||||||
M-192 | Wire mesh 50mm x 50mm size of 3mm wire | Kg | 222 | |||||||||||||||||||||||||||||||||||
M-193 | Wooden ballies 2" Dia for bracing | Each | As per Building SSR | |||||||||||||||||||||||||||||||||||
M-194 | Wooden ballies 8" Dia and 9 m long | Each | ||||||||||||||||||||||||||||||||||||
M-195 | Wooden packing | Cum | 1117 | |||||||||||||||||||||||||||||||||||
M-196 | Wooden staff for fastening of flag 25 mm dia, one m long |
Each | 70 | |||||||||||||||||||||||||||||||||||
Item 8.3 | Printing new letter and figures of any shade (ii) English Roman |
per cm height per letter | 1.6 | |||||||||||||||||||||||||||||||||||
Item 8.8 | Painting Two Coats on New Concrete Surfaces | Sqm | As per Building SSR | |||||||||||||||||||||||||||||||||||
Item 8.9 | Painting angle iron post Two Coats | Sqm | As per Building SSR |
Miscellaneous Items
1 | Benching old embankment slopes 0.45 X 0.45 M |
RM | 4.2 | |||||||||||||||||||||||||||||||||||||||||
2 | Laying Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with 13.615 % overhead |
per bag | 8.5 | |||||||||||||||||||||||||||||||||||||||||
3 | Rough stone for revetment 225mm thick | Cum | 145 | |||||||||||||||||||||||||||||||||||||||||
4 | Eradication of Weed growth from Drains, Canals by spraying Chemicals |
Sqm | 2 | |||||||||||||||||||||||||||||||||||||||||
5 | Thinner | Ltr | 80 | |||||||||||||||||||||||||||||||||||||||||
6 | Gear Oil | Ltr | 235 | |||||||||||||||||||||||||||||||||||||||||
7 | Cardium compound | kg | 95 |
****