Traffic Signs



CHAPTER : 8.0
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Item No. Descriptions Unit Rate
8.1

Cast in Situ Cement Concrete M20 kerb

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409

   
  A  Using Concrete Mixer metre 234.00
  B  Using Concrete Batching and Mixing Plant metre 229.00
8.2

Cast in Situ Cement Concrete M 20 Kerb with Channel

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409

   
  A Using Concrete Mixer metre 434.00
  B Using Concrete Batching and Mixing Plant metre 430.00
8.3

Retro-reflectorised Traffic signs

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (TypeIV) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on composite sign post of size 75mmx33.55mmx34.99 mm (5mm thick) made of Aluminium composite material in accordance to IRC 67-2010 fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts.

   
  i)  90 cm equilateral trian Each 3657.00
  ii)  60 cm equilateral triangle Each 2600.00
  iii ) 60 cm circular Each 3291.00
  iv)  80 mm x 60 mm rectangular Each 4364.00
  v)  60 cm x 45 cm rectangular Each 3221.00
  vi)  60 cm x 60 cm square Each 3711.00
  vii)  90 cm high octagon Each 5410.00
8.4

Retro-reflectorised Traffic signs

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts.

   
  i) 90 cm equilateral triangle Each 3477.00
  ii) 60 cm equilateral triangle Each 2420.00
  iii) 60 cm circular Each 3111.00
  iv) 80 mm x 60 mm rectangular Each 4184.00
  v) 60 cm x 45 cm rectangular Each 3041.00
  vi) 60 cm x 60 cm square Each 3531.00
  vii) 90 cm high octagon Each 5230.00
8.5

Direction and Place Identification signs upto 0.9 sqm size board.

(Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on composite sign post of size 75mmx33.55mmx34.99 mm (5mm thick) made of Aluminium composite material in accordance to IRC 67-2010 fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with minimum two number breakaway bolts.

sqm 7379.00
8.6

Direction and Place Identification signs upto 0.9 sqm size board.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts.

sqm 7199.00
8.7

Direction and Place Identification signs with size more than 0.9 sqm size board.

(Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on composite sign post of size 75mmx33.55mmx34.99 mm (5mm thick) made of Aluminium composite material in accordance to IRC 67-2010 fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with minimum two number breakaway bolts.

sqm 12892.00
8.8

Direction and Place Identification signs with size more than 0.9 sqm size board.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 ofspecification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts.

sqm 12712.00
8.9 Providing and pasting on existing informatory boards high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 duly printed message with water based latex optimized transparent ink as directed by Engineer-in-Charge. Sheet shall be fixed on the existing board by de-greasing either by acid or hot alkaline etching and all scale/ dirt removed to obtain smooth plain surface before application of high intensity grade retro reflective sheeting all complete. sqm 5859.00
8.10 Printing new letter and figures of any shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade   0.80
  (i) Hindi ( Matras commas and the like not to be measured and paid for Half letter shall be counted as half ) cm height per letter 0.50
  (ii) English and Roman cm height per letter  
8.11

Painting Two Coats on New Concrete Surfaces

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

sqm 53.00
8.12

Painting on Steel Surfaces

Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade

sqm 50.00
8.13

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work Painting lines, dashes, arrows etc on roads in two coats on new work

Painting lines, dashes, arrows etc on roads in two coats on new with ready mixed road Grade-I marking paint concrete surface (cold applied reflective paint) conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control.

   
  (i) Over 10 cm in width sqm 89.00
  (ii) Up to 10 cm in width sqm 76.00
8.14

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on Old Work

Painting lines, dashes, arrows etc on roads in two coats on old work with ready mixed Grade-I road marking paint (cold applied reflective paint) confirming to IS: 164 on bituminous surface, concrete including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control.

   
  (i) Over 10 cm in width sqm 62.00
  (ii)  Up to 10 cm in width sqm 67.00
8.15

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous

Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes all complete as per clause 803 of specifications

sqm 573.00
8.16

Kilo Metre Stone

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc .

   
  (i)  5th kilometre stone (precast) each 3101.00
  (ii)  Ordinary Kilometer stone (Precast) each 1868.00
  (iii)  Hectometer stone (Precast) each 550.00
8.17

Road Delineators

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.

sqm 249.00
8.18

Boundary pillar

Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting.

each 498.00
8.19

G.I Barbed wire Fencing 1.2 metre high

Providing and fixing 1.2 metres high GI barbed wire (weighing 9.38 kg per 100 mts.) fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808

metre 247.00
8.20

G.I Barbed wire Fencing 1.8 metre high

Providing and fixing 1.8 metres high GI barbed wire (weighing 9.38 kg per 100 mts.) fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808

metre 389.00
8.21

Fencing with welded steel wire Fabric (weighing 4 kg per sqm.) 75 mm x 50 mm (Suggestive)

Providing 1.20 metre high fencing with angle iron posts 50mmx 50mmx6mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.

metre 574.00
8.22

Tubular Steel Railing on Medium Weight steel channel (ISMC series) 100 mm x 50 mm

Providing, fixing and erecting 50 mm dia steel pipe (weighing 3.56 kg per mts.) railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings.
 

metre 1764.00
8.23

Tubular Steel Railing on Precast RCC posts, 1.2 m high above ground level

Providing, fencing and erecting 50 mm dia (weighing 3.56 kg per mts.) painted steel pipe railing in 3 rows on precast M20 grade RCC vertical posts1.8 metres high (1.2 m above GL) with 3 holes 50 mm dia for pipe, fixed 2 metres centre to, complete as per approved drawing.

metre 1453.00
8.24

Reinforced Cement Concrete Crash Barrier

Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH -33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified.

   
  (i) M 20 grade concrete metre 3105.00
8.25 Metal Beam Crash Barrier    
A A Type -A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811) metre 3784.00
B B Type -B, "THRIE" : Metal Beam Crash Barrier (Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 811) metre 5376.00
8.26

Flexible Crash Barrier,Wire Rope Safety Barrier

Providing and erecting a wire rope safety barrier with vertical posts of medium weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground level, split at the bottom for better grip, embedded in M 15 grade cement concrete 450 x 450 x 450 mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm dia and anchored at terminal posts 15 m apart. Terminal post to be embedded in M 15 grade cement concrete foundation 2400 x 450 x 900 mm (depth), strengthened by a strut of RS joist 100 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm, 1.50 m long at the bottom, all embedded in foundation concrete as per approved design and drawing, rate excluding excavation and cement concrete.

metre 2664.00
8.27

Cable Duct Across the Road

 Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:981997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 -1997 and approved drawings.

   
  (i)  Single Row for one utility service metre 1618.00
  (ii)  Double Row for two utility services metre 2946.00
  (iii)  Triple Row for three utility services metre 4284.00
8.28

Road Markers/Road Stud with Lense Reflector

Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973

each 605.00
8.29

Traffic Cone

Provision of red fluorescent with white reflective sleeve traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS 873

each 177.00
8.30

Portable Barricade in Construction Zon

Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x 5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an angle of 450, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-2001

each 2715.00
8.31 Permanent Type Barricade in Construction Zone    
  A   With Steel Components (Construction of a permanent type barricade made of steel components, 1.5 m high from road level, fitted with 3 horizontal rails 200 mm
wide and 4 m long on 50 x 50 x 5 mm angle iron vertical support, painted with yellow and white strips, 150 mm in width at an angle of450, complete as per IRC:SP:55-2001)
each 4305.00
  B  With Wooden Components (Construction of a permanent type barricade made of wooden components, 1.5 m high from road level, fitted with 3 horizontal planks 200 mm wide and 3.66 m long on 100 x 100mm wooden vertical post, painted with yellow and white striups, 150 mm in width at an angle of450, complete as per IRC:SP:55-2001  each 4514.00
  C  With Bricks (Construction of a permanent type barricade made with brick work in mud mortar, 1.5 m high, 4 m long, 600 mm thick, plastered with cement mortar 1:6, painted with yellow and white strips) each 17267.00
8.32 Drum Delineator in Construction Zone
Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:552001
each 422.00
8.33 Flagman
Positioning of a smart flagman with a yellow vest and a yellow cap and a red flag 600 x 600 mm securely fastened to a staff 1 m in length for guiding the traffic.
each 485.00
8.34 Providing and fixing guard stones 220x220x1000mm made of hammer dressed stones and fixed 400mm into the ground inmoorum and broken aggregates block of size 500x500x500 mm and given two coats of paints with white and black bands i/cexcavation etc. complete each 331.00

*****