WATER SUPPLY



BASIC RATES (SH: 18.0 WATER SUPPLY)
Code
No.		 Description Unit Rate
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 800.00
0010 Hire charges of derrick monkey rope day 750.00
0114 Beldar day 558.00
0115 Coolie day 558.00
0116 Fitter (grade 1) day 738.00
0117 Assistant Fitter or 2nd class Fitter day 679.00
0123 Mason (brick layer) 1st class day 738.00
0124 Mason (brick layer) 2nd class day 679.00
0593 C.P. Brass Extension Nipple (1/2"x2" size) each 40.00
0761 Fuel wood quintal 500.00
0771 Kerosene oil litre 50.00
1301 Bleaching powder quintal 1800.00
1304 Surface box for stop cock each 125.00
1305 Surface box for sluice valve each 210.00
1307 Surface box for water meter each 250.00
1339 Brass bib-cock 15 mm dia each 210.00
1340 Brass bib-cock 20 mm dia each 225.00
1342 Brass stop-cock 15 mm dia each 210.00
1343 Brass stop-cock 20 mm dia each 225.00
1360 C.I. mouth, brass ferrule 15 mm dia each 140.00
1361 C.I. mouth, brass ferrule 20 mm dia each 160.00
1362 C.l. mouth, brass ferrule 25 mm dia each 220.00
1373 Rubber insertions for 75 mm dia pipe joints each 16.00
1374 Rubber insertions for 100 mm dia pipe joints each 18.00
1375 Rubber insertions for 125 mm dia pipe joints each 20.00
1376 Rubber insertions for 150 mm dia pipe joints each 20.00
1377 Rubber insertions for 200 mm dia pipe joints each 25.00
1378 Rubber insertions for 250 mm dia pipe joints each 40.00
1379 Rubber insertions for 300 mm dia pipe joints each 45.00
1380 Rubber insertions for 350 mm dia pipe joints each 50.00
1381 Rubber insertions for 400 mm dia pipe joints each 73.00
1382 Rubber insertions for 450 mm dia pipe joints each 92.00
1383 Rubber insertions for 500 mm dia pipe joints each 110.00
1384 Rubber insertions for 600 mm dia pipe joints each 125.00
1397 Pig lead kg 176.00
1464 S & S.C.I. standard specials upto 300 mm dia (heavy class) quintal 3600.00
1466 S & S.C.I. standard specials over 300 mm dia (heavy class) quintal 3700.00
1468 Flanged C.I. standard specials upto 300 mm dia (heavy class) quintal 5500.00
1470 Flanged C.I. standard specials over 300 mm dia (heavy class) quintal 5500.00
1472 Casing pipe 100 mm dia metre 335.00
1545 G.I. pipes 15 mm dia metre 91.00
1546 G.I. pipes 20 mm dia metre 120.00
1547 G.I. pipes 25 mm dia metre 171.00
1548 G.I. pipes 32 mm dia metre 215.00
1549 G.I. pipes 40 mm dia metre 250.00
1550 G.I. pipes 50 mm dia metre 310.00
1551 G.I. pipes 65 mm dia metre 395.00
1552 G.I. pipes 80 mm dia metre 505.00
1555 G.I. back (jam) nuts 25 mm dia each 15.00
1559 G.I. back (jam) nuts 65 mm dia each 25.00
1608 G.I. tees (equal) 25 mm each 50.00
1612 G.I. tees (equal) 65 mm each 452.00
1641 G.I. Union 15 mm nominal bore each 30.00
1642 G.I. Union 20 mm nominal bore each 49.00
1643 G.I. Union 25 mm nominal bore each 108.00
1644 G.I. Union 32 mm nominal bore each 141.00
1645 G.I. Union 40 mm nominal bore each 192.00
1646 G.I. Union 50 mm nominal bore each 249.00
1647 G.I. Union 65 mm nominal bore each 504.00
1648 G.I. Union 80 mm nominal bore each 563.00
1649 Polyethylene water storage tank with cover and suitable locking arrangement per litre 5.50
1687 Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore each 30.00
1688 Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore each 35.00
1689 Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore each 35.00
1690 Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore each 48.00
1693 S.C.I. hand pump each 670.00
1878 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia each 100.00
1879 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia each 125.00
1881 Spun yarn kg 50.00
1882 Strainer brass 40 mm dia 1.5 metre long each 600.00
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 210.00
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia each 235.00
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia each 230.00
1926 20 mm dia Gunmetal gate valve with wheel each 325.00
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 350.00
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia each 410.00
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia each 480.00
1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia each 620.00
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia each 1080.00
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia each 1620.00
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 330.00
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each 450.00
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each 560.00
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each 820.00
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each 1490.00
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each 2120.00
1940 C.I. sluice valve (with caps) class I: 100 mm dia each 2410.00
1941 C.I. sluice valve (with caps) class I : 125 mm dia each 2600.00
1942 C.I. sluice valve (with caps) class I: 150 mm dia each 3600.00
1943 C.I. sluice valve (with caps) class I : 200 mm dia each 7500.00
1944 C.I. sluice valve (with caps) class I : 250 mm dia each 10980.00
1945 C.I. sluice valve (with caps) class I: 300 mm dia each 15500.00
1956 Bolts and nuts 16 mm dia 60 mm long each 11.00
1957 Bolts and nuts 16 mm dia 65 mm long each 12.00
1958 Bolts and nuts 20 mm dia 65 mm long each 15.00
1959 Bolts and nuts 20 mm dia 70 mm long each 17.00
1960 Bolts and nuts 20 mm dia 75 mm long each 16.00
1961 Bolts and nuts 20 mm dia 80 mm long each 18.00
1962 Bolts and nuts 24 mm dia 85 mm long each 28.00
1963 Bolts and nuts 24 mm dia 90 mm long each 32.00
1964 Bolts and nuts 27 mm dia 100 mm long each 38.00
2271 Carriage of G.I. pipes below 100 mm dia tonne 92.24
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 92.24
2309 Carriage of Cast Iron fittings tonne 92.24
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 226.82
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre 302.97
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 378.03
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 614.93
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 873.84
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 1080.08
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 1512.11
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 2061.97
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 2520.19
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 2520.19
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 3780.28
2330 Carriage of C.I. pipes 500 mm dia 100 metre 2520.19
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 5670.42
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre 7560.57
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre 7560.57
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre 7560.57
2335 Carriage of sand cum 103.77
2341 Carriage of Pig lead tonne 92.24
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 226.82
2344 Carriage of Cast iron pipes 150 mm dia 100 metre 378.03
2345 Carriage of Cast iron pipes 200 mm dia 100 metre 614.93
2346 Carriage of Cast iron pipes 250 mm dia 100 metre 873.84
2347 Carriage of Cast iron pipes 300 mm dia 100 metre 1080.08
2348 Carriage of Cast iron pipes 350 mm dia 100 metre 1512.11
2349 Carriage of Cast iron pipes 400 mm dia 100 metre 2061.97
2350 Carriage of Cast iron pipes 450 mm dia 100 metre 2520.19
2351 Carriage of Cast iron pipes 500 mm dia 100 metre 2520.19
2352 Carriage of Cast iron pipes 600 mm dia 100 metre 3780.28
2353 Carriage of Cast iron pipes 700 mm dia 100 metre 3780.28
2355 Carriage of Cast iron pipes 800 mm dia 100 metre 3780.28
2356 Carriage of Cast iron pipes 900 mm dia 100 metre 5670.42
2357 Carriage of Cast iron pipes 1000 mm dia 100 metre 7560.57
3080 Gunmetal non-return valve - vertical (screwed end) 25 mm dia each 350.00
3084 Gunmetal non-return valve - vertical (screwed end) 32 mm dia each 500.00
3088 Gunmetal non-return valve - vertical (screwed end) 40 mm dia each 700.00
3092 Gunmetal non-return valve - vertical (screwed end) 50 mm dia each 900.00
3096 Gunmetal non-return valve - vertical (screwed end) 65 mm dia each 1500.00
3300 Gunmetal non-return valve - vertical (screwed end) 80 mm dia each 2500.00
3311 C.I. sluice valve (with caps) class II : 100 mm dia each 2700.00
3314 C.I. sluice valve (with caps) class II : 125 mm dia each 3200.00
3317 C.I. sluice valve (with caps) class II : 150 mm dia each 4000.00
3320 C.I. sluice valve (with caps) class II : 200 mm dia each 8900.00
3321 C.I. sluice valve (with caps) class II : 250 mm dia each 14500.00
3326 C.I. sluice valve (with caps) class II : 300 mm dia each 18200.00
3327 15 mm Battery Based Sensor Pillar Cock each 5800.00
6501 Sand zone V (Jamuna) cum 1225.00
7257 C.P. Brass bibcock 15 mm each 290.00
7258 C.P. Brass long nose bibcock 15 mm each 430.00
7259 C.P. Brass long body bibcock 15 mm each 385.00
7260 C.P. Brass stop cock (concealed) 15 mm each 430.00
7261 C.P. Brass angle valve 15 mm each 375.00
7400 15 mm PTMT bib cock each 71.00
7401 15 mm PTMT bib cock with flange (fancy) each 105.00
7402 15 mm PTMT bib cock long body with flange each 116.00
7403 15 mm dia PTMT stop cock (male thread) each 71.00
7405 20 mm dia PTMT stop cock each 97.00
7406 PTMT pillar cock each 125.00
7407 PTMT push cock 15 mm dia each 62.00
7408 PTMT push cock 12 mm dia 20 mm BSP each 57.00
7409 PTMT grating 100 mm dia each 20.00
7410 PTMT Pillar cock (fancy) 15 mm foam flow each 138.00
7411 125 mm grating with waste hole each 30.00
7412 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia (110 gm) each 118.00
7415 Double acting air valve 50 mm each 3715.00
7416 Double acting air valve 80 mm each 4525.00
7417 Double acting air valve 100 mm each 5910.00
7418 Water meter (including testing charges) 80 mm each 2030.00
7419 Water meter (including testing charges) 100 mm each 3143.00
7420 Water meter (including testing charges) 150 mm each 4765.00
7421 Water meter (including testing charges) 200 mm each 5145.00
7422 Dirt box strainer 80 mm each 2680.00
7423 Dirt box strainer 100 mm each 4370.00
7424 Dirt box strainer 150 mm each 5540.00
7425 Dirt box strainer 200 mm each 7860.00
7495 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each 100.00
7496 PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each 135.00
7497 PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball		 each 290.00
7498 PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each 480.00
7499 PTMT Ball Cock 50mm complete with Epoxy Coated Aluminium Rod & H.D. Ball each 870.00
7500 PTMT Angle Stop cock with Flange 15 mm each 100.00
7501 PTMT Swiveling shower 15 mm each 70.00
7509 PTMT Soap Dish/Holder 138x102x75 mm each 84.00
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia metre 765.00
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia metre 1150.00
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 200 mm dia metre 1575.00
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia metre 2200.00
7655 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia metre 2750.00
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia metre 3350.00
7657 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia metre 4300.00
7658 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia metre 5000.00
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia metre 6270.00
7660 Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia metre 7560.00
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia metre 10500.00
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia metre 11350.00
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia metre 11450.00
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia metre 13900.00
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia metre 15550.00
7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia each 29.00
7668 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia each 36.00
7669 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 mm dia each 63.00
7670 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia each 74.00
7671 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm dia each 110.00
7672 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm dia each 126.00
7673 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm dia each 230.00
7674 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm dia each 270.00
7675 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm dia each 290.00
7676 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm dia each 365.00
7677 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm dia each 550.00
7678 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm dia each 660.00
7679 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm dia each 725.00
7680 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm dia each 960.00
7681 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000 mm dia each 1145.00
7682 Ductile Iron K - 12 specials suitable for push on jointing up to 600 mm dia quintal 12400.00
7683 Ductile Iron K - 12 specials suitable for push on jointing over 600 mm dia quintal 17200.00
7684 Ductile Iron specials suitable for mechanical jointing as per
I.S. 9523 - up to 600 mm dia		 quintal 13050.00
7685 Ductile Iron Specials suitable for mechanical jointing as per
I.S. 9523 over 600 mm dia		 quintal 18750.00
7686 Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia metre 1100.00
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia metre 1650.00
7688 Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia metre 2075.00
7689 Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia metre 2950.00
7690 Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia metre 3790.00
7691 Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia metre 4780.00
7692 Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia metre 6150.00
7693 Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia metre 6453.00
7694 Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia metre 9180.00
7695 Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia metre 12150.00
7696 Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia metre 14370.00
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia metre 857.00
7698 S&S Centrifugally (Spun) C.I. Pipe class LA 125 mm dia metre 1067.00
7699 S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia metre 1286.00
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia metre 2190.00
7701 S&S Centrifugally (Spun) C.I. Pipe class LA 250 mm dia metre 2857.00
7702 S&S Centrifugally (Spun) C.I. Pipe class LA 300 mm dia metre 3857.00
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350 mm dia metre 4619.00
7704 S&S Centrifugally (Spun) C.I. Pipe class LA 400 mm dia metre 6095.00
7705 S&S Centrifugally (Spun) C.I. Pipe class LA 450 mm dia metre 7381.00
7706 S&S Centrifugally (Spun) C.I. Pipe class LA 500 mm dia metre 8571.00
7707 S&S Centrifugally (Spun) C.I. Pipe class LA 600 mm dia metre 11995.00
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up to 300 mm dia quintal 5190.00
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300 mm dia quintal 6200.00
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300 mm dia quintal 8571.00
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per I.S. 13382 over 300 mm dia quintal 9048.00
7712 Screwed double flanged centrifugally cast (spun) C.I. Pipe of
Class B conforming to I.S. 1536, - 100 mm dia		 metre 1310.00
7713 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150 mm dia metre 2048.00
7714 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200 mm dia metre 3238.00
7715 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250 mm dia metre 3905.00
7716 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300 mm dia metre 4990.00
7717 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350 mm dia metre 6286.00
7718 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400 mm dia metre 8143.00
7719 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450 mm dia metre 10381.00
7720 Screwed double flanged centrifugally cast (spun) C./. Pipe of Class B conforming to I.S. 1536, - 500 mm dia metre 12914.00
7721 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600 mm dia metre 17905.00
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia metre 800.00
7723 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia metre 1140.00
7724 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia metre 1400.00
7725 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia metre 1800.00
7726 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 300 mm dia metre 2250.00
7727 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 350 mm dia metre 2650.00
7728 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia metre 3175.00
7729 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia metre 3852.00
7730 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia metre 4350.00
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia metre 5600.00
7732 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia metre 7300.00
7733 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia metre 9100.00
7734 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia metre 11800.00
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm dia metre 12300.00
7859 P.T.M.T. Bib cock with nozzle 15 mm each 154.50
7861 P.T.M.T. Stop cock (concealed) 15 mm each 133.50
7862 15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts		 each 46.50
7863 15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts		 each 57.00
7864 P.T.M.T. extension nipple 15 mm dia each 30.00
7865 P.T.M.T. extension nipple 20 mm dia each 54.00
7866 P.T.M.T. extension nipple 25 mm dia each 78.00
8300 1216 mm PE-AL-PE Composite pressure pipe metre 62.00
8301 1620 mm PE-AL-PE Composite pressure pipe metre 78.00
8302 2025 mm PE-AL-PE Composite pressure pipe metre 110.00
8303 2532 mm PE-AL-PE Composite pressure pipe metre 157.00
8304 3240 mm PE-AL-PE Composite pressure pipe metre 235.00
8305 4050 mm PE-AL-PE Composite pressure pipe metre 330.00
8306 PPR Union 20 mm each 48.00
8307 PPR Union 25 mm each 97.00
8308 PPR Union 32 mm each 137.20
8309 PPR Union 40 mm each 184.80
8310 PPR Union 50 mm each 352.80
8311 PPR Union 63 mm each 483.60
8312 PPR Union 75 mm each 933.00
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 20 mm Outer dia metre 43.27
8627 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 25 mm Outer dia metre 66.80
8628 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 32 mm Outer dia metre 107.47
8629 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16 (SDR 7.4) - 40 mm Outer dia metre 161.07
8630 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 50 mm Outer dia metre 252.22
8631 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 63 mm Outer dia metre 281.73
8632 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 75 mm Outer dia metre 418.18
8633 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 90 mm Outer dia metre 597.63
8634 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 110 mm Outer dia metre 885.83
8635 Poly propylene- Random - Co - Polymer (PPR) pipes PN-10 (SDR 11) - 160 mm Outer dia metre 2557.30
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia metre 48.55
8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia metre 77.80
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia metre 113.60
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia metre 163.65
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia metre 228.70
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia metre 375.25
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner dia metre 793.30
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia metre 1031.05
8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia metre 1466.75
8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia metre 3145.15
8701 SS pipe 304 grades with press fit technology as per JIS 3448 standard 48.60 mm outer dia metre 610.00
8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe each 59.00
8779 SS pipe 304 grades with press fit technology as per JIS 3448 standard 15.88 mm outer dia metre 130.00
8780 SS pipe 304 grades with press fit technology as per JIS 3448 standard 22.22 mm outer dia metre 243.00
8781 SS pipe 304 grades with press fit technology as per JIS 3448 standard 28.58 mm outer dia metre 297.00
8782 SS pipe 304 grades with press fit technology as per JIS 3448 standard 34.00 mm outer dia metre 423.00
8783 SS pipe 304 grades with press fit technology as per JIS 3448 standard 42.70 mm outer dia metre 441.00
8786 Coupling/Socket fittings for 22.22 mm outer dia SS pipe each 63.00
8787 Coupling/Socket fittings for 28.58 mm outer dia SS pipe each 89.00
8788 Coupling/Socket fittings for 34.00 mm outer dia SS pipe each 131.00
8789 Coupling/Socket fittings for 42.70 mm outer dia SS pipe each 158.00
8790 Coupling/Socket fittings for 48.60 mm outer dia SS pipe each 180.00
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe each 103.00
8792 Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe each 141.00
8793 Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe each 145.00
8794 Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe each 184.00
8795 Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe each 187.00
8796 Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe each 190.00
8797 Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe each 359.00
8798 Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe each 362.00
8799 Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe each 362.00
8800 Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe each 387.00
8801 Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe each 410.00
8802 Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe each 410.00
8803 Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe each 410.00
8804 Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe each 410.00
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 410.00
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 47.00
8807 Slip Coupling / Socket 22.22 mm outer dia SS pipe each 63.00
8808 Slip Coupling / Socket 28.58 mm outer dia SS pipe each 89.00
8809 Slip Coupling / Socket 34.00 mm outer dia SS pipe each 131.00
8810 Slip Coupling / Socket 42.70 mm outer dia SS pipe each 158.00
8811 Slip Coupling / Socket 48.60 mm outer dia SS pipe each 170.00
8812 Elbow 90° for 15.88 mm outer dia SS pipe each 58.00
8813 Elbow 90° for 22.22 mm outer dia SS pipe each 63.00
8814 Elbow 90° for 28.58 mm outer dia SS pipe each 96.00
8815 Elbow 90° for 34.00 mm outer dia SS pipe each 109.00
8816 Elbow 90° for 42.70 mm outer dia SS pipe each 116.00
8817 Elbow 90° for 48.60 mm outer dia SS pipe each 150.00
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS pipe each 148.00
8819 Reducing Elbow 90° for 28.58 mm X 15.88 mm outer dia SS pipe each 191.00
8820 Reducing Elbow 90° for 28.58 mm X 22.22 mm outer dia SS pipe each 221.00
8821 Reducing Elbow 90° for 34.00 mm X 22.22 mm outer dia SS pipe each 287.00
8822 Reducing Elbow 90° for 34.00 mm X 28.58 mm outer dia SS pipe each 345.00
8823 Reducing Elbow 90° for 42.70 mm X 34.00 mm outer dia SS pipe each 179.00
8824 Equal Tee for 15.88 mm outer dia SS pipe each 159.00
8825 Equal Tee for 22.22 mm outer dia SS pipe each 231.00
8826 Equal Tee for 28.58 mm outer dia SS pipe each 273.00
8827 Equal Tee for 34.00 mm outer dia SS pipe each 437.00
8828 Equal Tee for 42.70 mm outer dia SS pipe each 683.00
8829 Equal Tee for 48.60 mm outer dia SS pipe each 887.00
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 179.00
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 273.00
8832 Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe each 273.00
8833 Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe each 437.00
8834 Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe each 437.00
8835 Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe each 437.00
8836 Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe each 683.00
8837 Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe each 683.00
8838 Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe each 683.00
8839 Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe each 683.00
8840 Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe each 887.00
8841 Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe each 887.00
8842 Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe each 887.00
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 887.00
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 887.00
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded each 179.00
8846 Stainless steel Male thread Tee for 22.22 mm outer dia X 15 mm nomina dia threaded each 200.00
8847 Stainless steel Male thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded each 205.00
8848 Stainless steel Male thread Tee for 28.58 mm outer dia X 15 mm nomina dia threaded each 273.00
8849 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm nominal dia threaded each 273.00
8850 Stainless steel Male thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded each 273.00
8851 Stainless steel Male thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded each 437.00
8852 Stainless steel Male thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded each 437.00
8853 Stainless steel Male thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded each 437.00
8854 Stainless steel Male thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded each 437.00
8855 Stainless steel Male thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded each 683.00
8856 Stainless steel Male thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded each 683.00
8857 Stainless steel Male thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded each 683.00
8858 Stainless steel Male thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded each 683.00
8859 Stainless steel Male thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded each 683.00
8860 Stainless steel Male thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded each 887.00
8861 Stainless steel Male thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded each 887.00
8862 Stainless steel Male thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded each 887.00
8863 Stainless steel Male thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded each 887.00
8864 Stainless steel Male thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded each 887.00
8865 Stainless steel Male thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded each 887.00
8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 mm
nominal dia threaded		 each 179.00
8867 Stainless steel Female thread Tee for 22.22 mm outer dia X 15 mm nominal dia threaded each 200.00
8868 Stainless steel Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded each 200.00
8869 Stainless steel Female thread Tee for 28.58 mm outer dia X 15 mm nominal dia threaded each 273.00
8870 Stainless steel Female thread Tee for 28.58 mm outer dia X 20 mm nominal dia threaded each 273.00
8871 Stainless steel Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded each 273.00
8872 Stainless steel Female thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded each 437.00
8873 Stainless steel Female thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded each 437.00
8874 Stainless steel Female thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded each 437.00
8875 Stainless steel Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded each 437.00
8876 Stainless steel Female thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded each 683.00
8877 Stainless steel Female thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded each 683.00
8878 Stainless steel Female thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded each 683.00
8879 Stainless steel Female thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded each 683.00
8880 Stainless steel Female thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded each 683.00
8881 Stainless steel Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded each 887.00
8882 Stainless steel Female thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded each 887.00
8883 Stainless steel Female thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded each 887.00
8884 Stainless steel Female thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded each 887.00
8885 Stainless steel Female thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded each 887.00
8886 Stainless steel Female thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded each 887.00
8887 Stainless steel Female threaded Connector/Adapter for 15.88 mm outer dia X 15 mm nominal threaded each 190.00
8888 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded		 each 230.00
8889 Stainless steel Female threaded Connector/Adapter for 22.22 mm outer dia X 20 mm nominal threaded each 237.00
8890 Stainless steel Female threaded Connector/Adapter for 28.58 mm outer dia X 15 mm nominal threaded each 277.00
8891 Stainless steel Female threaded Connector/Adapter for 28.58 mm outer dia X 20 mm nominal threaded each 286.00
8892 Stainless steel Female threaded Connector/Adapter for 28.58 mm outer dia X 25 mm nominal threaded each 337.00
8893 Stainless steel Female threaded Connector/Adapter for 34.00 mm outer dia X 25 mm nominal threaded each 409.00
8894 Stainless steel Female threaded Connector/Adapter for 34.00 mm outer dia X 32 mm nominal threaded each 538.00
8895 Stainless steel  Female threaded Connector/Adapter for 42.70 mm outer dia X 32 mm nominal threaded each 576.00
8896 Stainless steel  Female threaded Connector/Adapter for 42.70 mm outer dia X 40 mm nominal threaded each 681.00
8897 Stainless steel  Female threaded Connector/Adapter for 48.60 mm outer dia X 40 mm nominal threaded each 838.00
8898 Stainless steel Female threaded Connector/Adapter for 48.60 mm outer dia X 50 mm nominal threaded each 965.00
8899 Stainless steel Male threaded Connector/Adapter for 15.88 mm outer dia X 15 mm nominal threaded each 193.00
8900 Stainless steel  Male threaded Connector/Adapter for 22.22 mm outer dia X 15 mm nominal threaded each 227.00
8901 Stainless steel Male threaded Connector/Adapter for 22.22 mm outer dia X 20 mm nominal threaded each 248.00
8902 Stainless steel  Male threaded Connector/Adapter for 28.58 mm outer dia X 20 mm nominal threaded each 313.00
8903 Stainless steel  Male threaded Connector/Adapter for 28.58 mm outer dia X 25 mm nominal threaded each 320.00
8904 Stainless steel Male threaded Connector/Adapter for 34.00 mm outer dia X 25 mm nominal threaded each 461.00
8905 Stainless steel Male threaded Connector/Adapter for 34.00 mm outer dia X 32 mm nominal threaded each 565.00
8906 Stainless steel Male threaded Connector/Adapter for 42.70 mm outer dia X 32 mm nominal threaded each 649.00
8907 Stainless steel Male threaded Connector/Adapter for 42.70 mm outer dia X 40 mm nominal threaded each 726.00
8908 Stainless steel Male threaded Connector/Adapter for 48.60 mm outer dia X 40 mm nominal threaded each 840.00
8909 Stainless steel Male threaded Connector/Adapter for 48.60 mm outer dia X 50 mm nominal threaded each 1138.00
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 mm
nominal dia threaded		 each 234.00
8911 Stainless steel Valve Connector for 22.22 mm outer dia X 15 mm nominal dia threaded each 276.00
8912 Stainless steel Valve Connector for 22.22 mm outer dia X 20 mm nominal dia threaded each 295.00
8913 Stainless steel Valve Connector for 28.58 mm outer dia X 25 mm nominal dia threaded each 424.00
8914 Stainless steel Valve Connector for 34.00 mm outer dia X 32 mm nominal dia threaded each 629.00
8915 Stainless steel Valve Connector for 42.70 mm outer dia X 40 mm nominal dia threaded each 875.00
8916 Stainless steel Valve Connector for 48.60 mm outer dia X 50 mm nominal dia threaded each 1176.00
8917 SS Female Threaded Elbow 90o for 15.88 mm outer dia X 15 mm nominal dia threaded each 150.00
8918 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm  nominal dia threaded each 191.00
8919 Stainless steel Female Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded each 191.00
8920 Stainless steel Female Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded each 205.00
8921 Stainless steel Female Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded each 287.00
8922 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X 32 mm nominal dia threaded each 478.00
8923 Stainless steel Female Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded each 478.00
8924 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X 40 mm nominal dia threaded each 683.00
8925 Stainless steel Female Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded each 683.00
8926 Stainless steel  Male Threaded Elbow 90o for 15.88 mm outer dia X15 mm nominal dia threaded each 191.00
8927 Stainless steel Male Threaded Elbow 90o for 22.22 mm outer dia X15 mm nominal dia threaded each 205.00
8928 Stainless steel Male Threaded Elbow 900 for 22.22 mm outer dia X20 mm nominal dia threaded each 205.00
8929 Stainless steel Male Threaded Elbow 900 for 28.58 mm outer dia X25 mm nominal dia threaded each 205.00
8930 Stainless steel MaleThreaded Elbow 900 for 34.00 mm outer dia X25 mm nominal dia threaded each 287.00
8931 Stainless steel Male Threaded Elbow 900 for 34.00 mm outer dia X32 mm nominal dia threaded each 287.00
8932 Stainless steel Male Threaded Elbow 900 for 42.70 mm
outer dia X32 mm nominal dia threaded		 each 478.00
8933 Stainless steel Male Threaded Elbow 900 for 42.70 mm outer dia X40 mm nominal dia threaded each 478.00
8934 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X40 mm nominal dia threaded each 683.00
8935 Stainless steel Male Threaded Elbow 900 for 48.60 mm outer dia X50 mm nominal dia threaded each 683.00
8936 Stainless steel Cap for 15.88 mm outer dia pipe each 45.00
8937 Stainless steel Cap for 22.22 mm outer dia pipe each 64.00
8938 Stainless steel Cap for 28.58 mm outer dia pipe each 84.00
8939 Stainless steel Cap for 34.00 mm outer dia pipe each 163.00
8940 Stainless steel Cap for 42.70 mm outer dia pipe each 236.00
8941 Stainless steel Cap for 48.60 mm outer dia pipe each 299.00
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 214.00
8943 Stainless steel Pipe Bridge for 22.22 mm outer dia pipe each 271.00
8944 Stainless steel Pipe Bridge for 28.58 mm outer dia pipe each 407.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00
18.0 WATER SUPPLY
Code
No.		 Description Unit Rate
PE-AL-PE COMPOSITE PRESSURE PIPE
18.1 Providing and fixing Polyethelene-Aluminium-Polyethelene PE-ALPE
Composite Pressure Pipes conforming to IS - 15450, U.V.
stabilized with carbon black having thermal stability for hot & cold
water supply, capable to withstand temperature up to 80°C, including
all special fittings of composite material (engineering plastic blend
and brass inserts wherever required) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes testing of joints complete as per direction of the
Engineer-in-charge.		    
INTERNAL WORK - EXPOSED ON WALL
18.1.1 1216 (16 mm OD) pipe metre 250.40
18.1.2 1620 (20 mm OD) pipe metre 292.75
18.1.3 2025 (25 mm OD) pipe metre 362.95
18.1.4 2532 (32 mm OD) pipe metre 468.95
18.1.5 3240 (40 mm OD) pipe metre 659.55
18.1.6 4050 (50 mm OD) pipe metre 824.80
18.2 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE
Composite Pressure Pipes conforming to IS - 15450, U.V.
stabilized with carbon black having thermal stability for hot & cold
water supply, capable to withstand temperature up to 80°C, including
all special fittings of composite material (engineering plastic blend
and brass inserts wherever required) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes the costs of cutting chases and including testing of
joints complete as per direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall
etc.		    
18.2.1 1216 (16 mm OD) pipe metre 441.15
18.2.2 1620 (20 mm OD) pipe metre 478.60
18.2.3 2025 (25 mm OD) pipe metre 553.50
18.2.4 2532 (32 mm OD) pipe metre 663.55
18.3 18.3 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE
Composite Pressure Pipes conforming to IS - 15450, U.V.
stabilized with carbon black having thermal stability for hot & cold
water supply, capable to withstand temperature up to 80°C, including
all special fittings of composite material (engineering plastic blend
and brass inserts wherever required) e.g. elbows, tees, reducers,
couplers & connectors etc., with trenching, refilling and testing of
joints complete as per direction of the engineer in charge.		    
External work
18.3.1 1216 (16 mm OD) pipe metre 226.25
18.0 WATER SUPPLY SUB HEAD    
18.3.2 1620 (20 mm OD ) pipe metre 254.05
18.3.3 2025 (25 mm OD ) pipe metre  309.70
18.3.4 2532 (32 mm OD ) pipe metre 391.45
18.3.5 3240 (40 mm OD ) pipe metre 547.70
18.3.6 4050 (50 mm OD ) pipe metre 712.95
PP-R PIPES
18.4 Providing and fixing 3 layer PP-R (Poly propylene Random
copolymer) pipes confirming to IS 15801, UV stabilized & anti
- microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes testing of joints complete as
per direction of Engineer-in-Charge.		    
Internal Exposed on walls
18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) metre 232.35
18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) metre 287.80
18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4) metre 344.55
18.4.4 PN - 16 Pipe, 40mm OD (SDR-7.4) metre 498.65
18.4.5 PN - 10 Pipe, 50mm OD (SDR-11) metre 638.90
18.5 Providing and fixing 3 layer PP-R (Poly propylene Random
copolymer) pipes confirming to IS:15801, UV stabilized & anti
- microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes the cost of cutting chases and
making good the same including testing of joints complete as
per direction of Engineer-in-Charge.
Concealed work,including cutting chases and making good
the wall etc.		    
18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4) metre 394.85
18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) metre 452.35
18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4) metre 511.65
18.6 Providing and fixing 3 layer PP-R (Poly propylene Random
copolymer) pipes confirming to IS:15801 UV stabilized & anti -
microbial fusion welded, having thermal stability for hot & cold
water supply, including all PP - R plain & brass threaded
polypropylene random fittings, including trenching, refilling &
testing of joints complete as per direction of Engineer-in-Charge.		    
External work
18.6.1 PN - 16 Pipe, 20mm OD (SDR-7.4) metre 187.85
18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) metre 236.30
18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4) metre 301.60
18.6.4 PN - 16 Pipe, 40 mm OD (SDR-7.4) metre 397.60
18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) metre 543.95
18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) metre 624.85
18.6.7 PN - 10 Pipe, 75 mm OD (SDR-11) metre 843.90
18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11) metre 1187.90
18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11) metre 1650.60
18.6.10 PN - 10 Pipe, 160 mm OD (SDR-11) metre 4457.25
18.6A Providing and fixing PPR Unions    
18.6A.1 PPR Union 20mm each 259.85
18.6A.2 PPR Union 25mm each 325.40
18.6A.3 PPR Union 32mm each  379.15
18.6A.4 PPR Union 40mm each 442.85
18.6A.5 PPR Union 50mm each 667.65
18.6A.6 PPR Union 63mm each 842.65
18.6A.7 PPR Union 75mm each  1443.90
C.P.V.C. PIPES
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.		    
Internal work - Exposed on wall
18.7.1 15 mm nominal outer dia Pipes metre 241.55
18.7.2 20 mm nominal outer dia Pipes metre 306.95
18.7.3 25 mm nominal outer dia Pipes metre 369.20
18.7.4 32 mm nominal outer dia Pipes metre 480.55
18.7.5 40 mm nominal outer dia Pipes metre 648.60
18.7.6 50 mm nominal outer dia Pipes metre 903.50
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls
etc.		    
18.8.1 15 mm nominal outer dia Pipes metre 409.65
18.8.2 20 mm nominal outer dia Pipes metre 478.15
18.8.3 25 mm nominal outer dia Pipes metre 561.95
18.8.4 32 mm nominal outer dia Pipes metre 679.15
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.		    
External work
18.9.1 15 mm nominal outer dia Pipes metre 202.85
18.9.2 20 mm nominal outer dia Pipes metre 253.70
18.9.3 25 mm nominal outer dia Pipes metre 326.65
18.9.4 32 mm nominal outer dia Pipes metre 413.70
18.9.5 40 mm nominal outer dia Pipes metre 536.75
18.9.6 50 mm nominal outer dia Pipes metre 791.65
18.9.7 62.50 mm nominal inner dia Pipes metre 1552.30
18.9.8 75 mm nominal inner dia Pipes metre  1965.85
18.9.9 100 mm nominal inner dia Pipes metre 2779.55
18.9.10 150 mm nominal inner dia Pipes metre 5821.85
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.		    
Internal work - Exposed on wall
18.10.1 15 mm dia nominal bore metre 284.90
18.10.2 20 mm dia nominal bore metre 344.10
8.10.3 1 25 mm dia nominal bore metre  438.00
18.10.4 32 mm dia nominal bore metre 529.70
18.10.5 40 mm dia nominal bore metre 639.60
18.10.6 50 mm dia nominal bore metre 786.75
18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,
i/c making good the walls etc. concealed pipe, including painting
with anti corrosive bitumastic paint, cutting chases and making good
the wall :		    
18.11.1 15 mm dia nominal bore metre 447.60
18.11.2 20 mm dia nominal bore metre 494.10
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.		    
External work
18.12.1 15 mm dia nominal bore metre 244.15
18.12.2 20 mm dia nominal bore metre 283.80
18.12.3 25 mm dia nominal bore metre 364.55
18.12.4 32 mm dia nominal bore metre 424.70
18.12.5 40 mm dia nominal bore metre 483.15
18.12.6 50 mm dia nominal bore metre 565.25
18.12.7 65 mm dia nominal bore metre 716.00
18.12.8 80 mm dia nominal bore metre 866.40
18.13 Making connection of G.I. distribution branch with G.I. main of following
sizes by providing and fixing tee, including cutting and threading the
pipe etc. complete :		    
18.13.1 25 to 40 mm nominal bore each 673.45
18.13.2  50 to 80 mm nominal bore each 1432.75
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost
of water meter and stop cock to be paid separately).		 each 606.55
BRASS FITTINGS
18.15 Providing and fixing brass bib cock of approved quality :    
18.15.1 15 mm nominal bore each 302.55
18.15.2 20 mm nominal bore each 326.45
18.16 Providing and fixing brass stop cock of approved quality :    
18.16.1 15 mm nominal bore each 302.55
18.16.2 20 mm nominal bore each 326.45
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :		    
18.17.1 25 mm nominal bore each 497.15
18.17.1A 20 mm nominal bore each 460.20
18.17.2 32 mm nominal bore each 581.25
18.17.3 40 mm nominal bore each 678.40
18.17.4 50 mm nominal bore each 869.20
18.17.5 65 mm nominal bore each 1488.10
18.17.6 80 mm nominal bore each 2217.90
18.18 Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :		    
18.18.1 15 mm nominal bore each 338.70
18.18.2 20 mm nominal bore each 386.40
18.18.3 25 mm nominal bore each 394.00
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :		    
18.19.1 25 mm nominal bore    
  18.19.1.1 Horizontal each 477.70
  18.19.1.2 Vertical each 504.45
18.19.2 32 mm nominal bore    
  18.19.2.1 Horizontal each 641.75
  18.19.2.2 Vertical each 708.65
18.19.3 40 mm nominal bore    
  18.19.3.1 Horizontal each 792.40
  18.19.3.2 Vertical each 979.70
18.19.4 50 mm nominal bore    
  18.19.4.1 Horizontal each 1144.05
  18.19.4.2 Vertical each 1251.10
18.19.5 65 mm nominal bore    
  18.19.5.1 Horizontal each 2043.95
  18.19.5.2 Vertical each 2057.35
18.19.6 80 mm nominal bore    
  18.19.6.1 Horizontal each 2890.70
  18.19.6.2 Vertical each  3399.10
18.20 Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main :		    
  18.20.1 15 mm nominal bore each 295.15
  18.20.2 20 mm nominal bore each 340.35
  18.20.3 25 mm nominal bore each 438.35
18.21 Providing and fixing uplasticised PVC connection pipe with brass
unions :		    
18.21.1 1 30 cm length    
  18.21.1.1 15 mm nominal bore each 72.85
  18.21.1.2 20 mm nominal bore each 79.55
18.21.2 45 cm length    
  18.21.2.1 15 mm nominal bore each 83.00
  18.21.2.2 20 mm nominal bore each 100.40
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :    
  18.22.1 100 mm diameter each 151.90
  18.22.2 150 mm diameter each 188.80
C.I./DUCTILE IRON PIPES & SPECIALS
18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes
(excluding cost of pipe).		 quintal
 		 264.25
18.24 Laying in position S&S or flanged C.I. special such as tees, bends,
collars, tapers and caps etc.(excluding cost of specials).		 quintal 491.50
18.25 Providing and laying S&S C.I. standard specials such as tees, bends,
collars, tapers, caps etc. (Heavy class):		    
  18.25.1 Up to 300 mm dia quintal 5320.40
  18.25.2 Over 300 mm dia quintal 5454.20
18.26 Providing and laying flanged C.I. standard specials such as tees,
bends, collars, tapers, caps etc., suitable for flanged jointing as per
IS : 1538 :		    
  18.26.1 Up to 300 mm dia quintal 7862.50
  18.26.2 Over 300 mm dia quintal 7862.50
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class
LA) conforming to IS - 1536 :		    
  18.27.1 100 mm dia pipe metre 1201.95
  18.27.2 125 mm dia pipe metre 1499.80
  18.27.3 150 mm dia pipe metre 1810.75
  18.27.4 200 mm dia pipe metre 3062.75
  18.27.5 250 mm dia pipe metre 4002.00
  18.27.6 300 mm dia pipe metre 5391.05
  18.27.7 350 mm dia pipe metre 6472.60
  18.27.8 400 mm dia pipe metre  8513.95
  18.27.9 450 mm dia pipe metre 10308.85
  18.27.10 500 mm dia pipe metre 11969.15
  18.27.11 600 mm dia pipe metre 16722.75
18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials,
including testing of joints but excluding the cost of pig lead :		    
  18.28.1 100 mm diameter pipe each 374.80
  18.28.2 125 mm diameter pipe each 556.65
  18.28.3 150 mm diameter pipe each 562.70
  18.28.4 200 mm diameter pipe each 747.65
  18.28.5 250 mm diameter pipe each 934.50
  18.28.6 300 mm diameter pipe each 1124.00
  18.28.7 350 mm diameter pipe each 1144.70
  18.28.8 400 mm diameter pipe each 1505.80
  18.28.9 450 mm diameter pipe each 1690.65
  18.28.10 500 mm diameter pipe each  1787.50
  18.28.11 600 mm diameter pipe each 2424.05
18.30 Providing flanged joints to double flanged C.I./ D.I. pipes and specials,
including testing of joints :		    
  18.30.1 80 mm diameter pipe each 169.15
  18.30.2 100 mm diameter pipe each 265.00
  18.30.3 125 mm diameter pipe each 278.35
  18.30.4 150 mm diameter pipe each 327.40
  18.30.5 200 mm diameter pipe each 355.50
  18.30.6 250 mm diameter pipe each 484.70
  18.30.7 300 mm diameter pipe each 491.40
  18.30.8 350 mm diameter pipe each 660.45
  18.30.9 400 mm diameter pipe each 906.00
  18.30.10 450 mm diameter pipe each 1115.15
  18.30.11 500 mm diameter pipe each 1263.20
  18.30.12 600 mm diameter pipe each 1478.10
C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES
18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately) :		    
18.31.1 100 mm diameter    
  18.31.1.1 Class I each 3977.60
  18.31.1.2 Class II each 4426.05
18.31.2 125 mm diameter    
  18.31.2.1 Class I each 4318.95
  18.31.2.2 Class II each 5182.20
18.31.3 150 mm diameter    
  18.31.3.1 Class I each 5836.60
  18.31.3.2 Class II each 6442.35
18.31.4 200 mm diameter    
  18.31.4.1 Class I each 11357.75
  18.31.4.2 Class II each 13376.85
18.31.6 300 mm diameter    
  18.31.6.1 Class I each 22942.10
  18.31.6.2 Class II each 26861.85
18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in
cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.
surface box 100x100 x75 mm (inside) with hinged cover fixed in cement
concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), i/c necessary excavation, foundation
concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate
40mm nominal size ) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12mm thick, finished with a floating coat of
neat cement complete as per standard design :		    
  18.32.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each 1582.45
18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :		    
  18.33.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each 9288.40
18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100 mm top diameter, 160 mm bottom diameter
and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size ), i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size ) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :		    
  18.34.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each  16134.15
18.35 Constructing masonry Chamber 120x120x100 cm inside, in brick
work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice
valve, with C.I. surface box 100 mm top diameter, 160 mm bottom
diameter and 180 mm deep ( inside) with chained lid and RCC top
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) , i/c necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with cement mortar 1:3 (1 cement
: 3 coarse sand) 12 mm thick, finished with a floating coat of neat
cement complete as per standard design :		    
  18.35.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each 22363.20
18.36 Constructing masonry Chamber 60x60x75 cm, inside in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants,
with C.I. surface box 350x350 mm top and 165 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10
graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,
finished with a floating coat of neat cement complete as per standard
design :		    
  18.36.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each 8856.70
18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter
complete with C.I. double flap surface box 400x200x200 mm (inside)
with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5
fine sand:10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as
per standard design :		    
  18.37.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5		 each 8300.25
18.38 Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work 		    
  18.38.1 15 mm diameter pipe metre  15.20
  18.38.2 20 mm diameter pipe metre 18.15
  18.38.3 25 mm diameter pipe metre 23.70
  18.38.4 32 mm diameter pipe metre 28.40
  18.38.5 40 mm diameter pipe metre 33.40
  18.38.6 50 mm diameter pipe metre 39.80
18.39 Repainting G.I. pipes and fittings with synthetic enamel white paint
with one coat of approved quality :		    
  18.39.1 15 mm diameter pipe metre 7.55
  18.39.2 20 mm diameter pipe metre 8.90
  18.39.3 25 mm diameter pipe metre 11.35
  18.39.4 32 mm diameter pipe metre 13.60
  18.39.5 40 mm diameter pipe metre 15.75
  18.39.6 50 mm diameter pipe metre  18.75
18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive
bitumastic paint of approved quality :		    
  18.40.1 15 mm diameter pipe metre 9.30
  18.40.2 20 mm diameter pipe metre 11.10
  18.40.3 25 mm diameter pipe metre 14.15
  18.40.4 32 mm diameter pipe metre 17.05
  18.40.5 40 mm diameter pipe metre 19.40
  18.40.6 50 mm diameter pipe metre  23.35
  18.40.7 65 mm diameter pipe metre 28.95
  18.40.8 80 mm diameter pipe metre 33.60
18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell,
in all soils except ordinary hard rocks requiring blasting, including
removing the casing pipe after the hand pump / tube well is lowered
and tested :		    
  18.42.1 Up to 6 metres depth metre 554.20
  18.42.2 Beyond 6 m and up to 12 m depth metre 656.20
  18.42.3 Beyond 12 m and up to 18 m depth metre 761.55
18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe
with brass strainer of approved quality.		 metre 768.55
18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I.
pipe for tube well including cleaning and priming the tube well.		 metre 433.95
18.45 Providing and placing in position hand pump of approved quality for
40 mm diameter G.I. pipe complete with all accessories.		 each 1117.80
18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading
the pipe and making long screws etc. complete (New work) :		    
  18.46.1 15 mm nominal bore each 235.75
  18.46.2 20 mm nominal bore each 261.15
  18.46.3 25 mm nominal bore each 340.10
  18.46.4 32 mm nominal bore each 384.25
  18.46.5 40 mm nominal bore each 452.50
  18.46.6 50 mm nominal bore  each 598.10
  18.46.7 65 mm nominal bore each 939.30
  18.46.8 80 mm nominal bore each 1018.20
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and
threading the pipe and making long screws, including excavation,
refilling the earth or cutting of wall and making good the same complete
wherever required :		    
  18.47.1 15 mm nominal bore each 617.20
  18.47.2 20 mm nominal bore each 642.65
  18.47.3 25 mm nominal bore each 721.60
  18.47.4 32 mm nominal bore each 765.75
  18.47.5 40 mm nominal bore each 833.95
  18.47.6 50 mm nominal bore each 1118.30
  18.47.7 65 mm nominal bore each 1459.50
  18.47.8 80 mm nominal bore each 1538.40
18.48 Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.		 per litre 8.80
18.48A  Providing and fixing rectangular high density polyethylene water
storage loft tank with cover, conforming to ISI : 12701, colour of
opaque white or as approved by Engineer-in-charge. The rate includes
making necessary holes for inlet, outlet & over flow pipes. The base
support i/c fittings & fixtures for tank shall be paid separately.		 per litre 8.80
C.P. BRASS FITTINGS
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 :		    
  18.49.1 15 mm nominal bore each 418.95
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.		    
  18.50.1 15 mm nominal bore each 618.80
18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.		    
  18.51.1 15 mm nominal bore each 552.35
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.		    
  18.52.1 15 mm nominal bore each 606.25
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931		    
  18.53.1 15mm nominal bore each 532.00
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)
of approved make and quality as per direction of Engineer-in-charge.		 each 61.25
PTMT FITTINGS
18.54 Providing and fixing PTMT bib cock of approved quality and colour:    
  18.54.1 15mm nominal bore, 86 mm long, weighing not less than
88 gms		 each 116.55
  18.54.2 15 mm nominal bore, 122mm long, weighing not less
than 99 gms		 each 162.05
  18.54.3 15 mm nominal bore, 165 mm long, weighing not less
than 110 gms		 each 176.75
  18.54.4 15 mm nominal bore, 90 mm long, weighing not less
than 93 gms		 each 228.30
18.55 Providing and fixing PTMT stop cock of approved quality and colour.    
  18.55.1 15 mm nominal bore, 86 mm long, weighing not less
than 88 gms		 each 116.55
  18.55.2 20 mm nominal bore, 89 mm long, weighing not less
than 88 gms		 each 151.35
  18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm
long, weighing not less than 108 gms		 each 200.20
18.56 Providing and fixing PTMT pillar cock of approved quality and colour.    
  18.56.1 15 mm nominal bore, 107 mm long, weighing not less
than 110 gms		 each 192.65
  18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing
not less than 120 gms		 each 210.05
18.57 Providing and fixing PTMT, push cock of approved quality and colour.    
  18.57.1 15 mm nominal bore, 98 mm long, weighing not less
than 75 gms		 each  104.50
  18.57.2 15 mm nominal bore, 80 mm long, weighing not less
than 46 gms		 each 97.85
18.58 Providing and fixing PTMT grating of approved quality and colour.    
18.58.1 Circular type    
  18.58.1.1 100 mm nominal dia each 37.90
  18.58.1.2 125 mm nominal dia with 25 mm waste hole each 51.25
18.58.2  Rectangular type with openable circular lid    
  18.58.2.1 150 mm nominal size square 100 mm
diameter of the inner hinged round grating		 each 169.00
AIR VALVE & WATER METER (BULK TYPE)
18.59 Providing and fixing C.I. double acting air valve of approved quality
with bolts, nuts, rubber insertions etc. complete (The tail pieces,
tapers etc if required will be paid separately) :		    
  18.59.1 50 mm dia  each 5157.00
  18.59.2 80 mm dia each 6240.70
  18.59.3 100 mm dia each 8193.10
18.60 Providing and fixing enclosed type water meter (bulk type) conforming
to IS : 2373 and tested by Municipal Board complete with bolts,
nuts, rubber insertions etc. (The tail pieces if required will be paid
separately) :		    
  18.60.1 80 mm dia nominal bore each 3576.10
  18.60.2 100 mm dia nominal bore each 5291.70
  18.60.3 150 mm dia nominal bore each 7725.80
  18.60.4 200 mm dia nominal bore each 8429.55
18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter
with nuts, bolts, rubber insertions etc. complete conforming to IS :
2373 :		    
  18.61.1 80 mm dia each 4097.90
  18.61.2 100 mm dia each 6585.50
  18.61.3 150 mm dia each 8345.25
  18.61.4 200 mm dia each 11644.65
18.62 Providing and fixing PTMT Ball cock of approved quality, colour and
make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.
plastic ball.		    
  18.62.1 15 mm nominal bore, 105 mm long, weighing not less
than 138 gms		 each 191.55
  18.62.2 20 mm nominal bore, 120 mm long, weighing not less
than 198 gms		 each 252.65
  18.62.3 25 mm nominal bore, 152mm long, weighing not less
than 440 gms		 each 474.25
  18.62.4 40 mm nominal bore, 206mm long, weighing not less
than 690 gms		 each 728.50
  18.62.5 50 mm nominal bore, 242mm long, weighing not less
than 1240 gms		 each 1250.30
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore,
weighing not less than 85 gms		 each  155.35
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms		 each 111.75
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms. each 130.50		    
18.66 Providing and laying S&S C.I. Standard specials such as tees, bends,
collars tapers and caps etc, suitable for flanged jointing as per IS :
1538 :		    
  18.66.1 Up to 300 mm dia quintal 7447.75
  18.66.2 Above 300 mm dia quintal 8799.05
18.67 Providing and laying S&S C.I. Standard specials suitable for
mechanical jointing as per IS : 13382 :		    
  18.67.1 Up to 300 mm dia quintal 11971.30
  18.67.2 Above 300 mm dia quintal  12609.50
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on
jointing as per IS : 9523 :		    
  18.68.1 Up to 600 mm dia quintal 17094.25
  18.68.2 Above 600 mm dia  quintal 23516.35
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for
mechanical jointing as per IS : 9523 :		    
  18.69.1 Up to 600 mm dia quintal 17963.95
  18.69.2 Above 600 mm dia quintal 25590.15
18.73 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally
(Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :		    
  18.73.1 100 mm dia Ductile Iron Double Flanged metre 1532.35
  18.73.2 150 mm dia Ductile Iron Double Flanged metre 2298.80
  18.73.3 200 mm dia Ductile Iron Double Flanged metre 2901.25
  18.73.4 250 mm dia Ductile Iron Double Flanged metre 4115.55
  18.73.5 300 mm dia Ductile Iron Double Flanged metre 5287.10
  18.73.6 350 mm dia Ductile Iron Double Flanged metre 6657.10
  18.73.7 400 mm dia Ductile Iron Double Flanged metre 8541.30
  18.73.8 450 mm dia Ductile Iron Double Flanged metre 9005.15
  18.73.9 500 mm dia Ductile Iron Double Flanged metre 12707.10
  18.73.10 600 mm dia Ductile Iron Double Flanged metre 16832.40
  18.73.11 700 mm dia Ductile Iron Double Flanged metre 19933.70
18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT
Nuts, collar and bush of approved quality and colour.		    
  18.74.1 15 mm nominal bore with 30cm length each 94.90
  18.74.2 15 mm nominal bore with 45 cm length each 112.45
18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour.		    
  18.75.1 15 mm nominal bore, weighing not less than 32 gms each 49.20
  18.75.2 20 mm nominal bore, weighing not less than 40 gms each 81.30
  18.75.3 25mm nominal bore, weighing not less than 62 gms each 113.40
18.76 Cutting holes up to 30x30 cm in walls including making good the
same:		    
  18.76.1 With common burnt clay F.P.S. (non modular) bricks each 327.25
18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing
drain pipe etc. and repairing the hole after insertion of drain pipe etc.
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), including finishing complete
so as to make it leak proof.		 each 344.60
18.78 Making chases up to 7.5x7.5 cm in walls including making good and
finishing with matching surface after housing G.I. pipe etc.		 metre 154.15
18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm
diameter in masonry and filling with cement concrete 1:3:6 (1 cement
: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
including disposal of malba.		 metre 180.15
18.80 Disinfecting C.I. water mains by flushing with water containing
bleaching powder @ 0.5 gms per litre of water and cleaning the
same with fresh water, operation to be repeated three times including
getting the sample of water from the disinfected main tested in the
municipal laboratory.		    
  18.80.1 80 mm diameter C.I. pipe 100 metre 1349.55
  18.80.2 100 mm diameter C.I. pipe 100 metre 1773.30
  18.80.3 125 mm diameter C.I. pipe 100 metre 2213.80
  18.80.4 150 mm diameter C.I. pipe 100 metre 2653.00
  18.80.5 200 mm diameter C.I. pipe 100 metre 3535.25
  18.80.6 250 mm diameter C.I. pipe 100 metre 4442.50
  18.80.7 300 mm diameter C.I. pipe 100 metre 4935.05
  18.80.8 350 mm diameter C.I. pipe 100 metre 5441.35
  18.80.9 400 mm diameter C.I. pipe 100 metre 5971.10
  18.80.10 450 mm diameter C.I. pipe 100 metre 6507.70
  18.80.11 500 mm diameter C.I. pipe 100 metre 7071.40
  18.80.12 600 mm diameter C.I. pipe 100 metre 8211.30
18.81 Extra for every operation of disinfecting the C.I. main by flushing with
water containing bleaching powder @ 0.5 gms per litre of water and
cleaning the same with fresh water, including getting the samples of
water tested in the municipal laboratory :		    
  18.81.1 80 mm diameter C.I. pipe 100 metre 493.50
  18.81.2 100 mm diameter C.I. pipe 100 metre 605.00
  18.81.3 125 mm diameter C.I. pipe 100 metre 739.00
  18.81.4 150 mm diameter C.I. pipe 100 metre 859.85
  18.81.5 200 mm diameter C.I. pipe 100 metre 1309.55
  18.81.6 250 mm diameter C.I. pipe 100 metre 1502.75
  18.81.7 300 mm diameter C.I. pipe 100 metre  1683.45
  18.81.8 350 mm diameter C.I. pipe 100 metre 1969.75
  18.81.9 400 mm diameter C.I. pipe 100 metre 2258.80
  18.81.10 450 mm diameter C.I. pipe 100 metre 2555.10
  18.81.11 500 mm diameter C.I. pipe 100 metre  2853.45
  18.81.12 600 mm diameter C.I. pipe 100 metre 3460.45
18.82 Dismantling old C.I. pipes including excavation and refilling trenches
after taking out the pipes, breaking lead caulked joints, melting of
lead and making into blocks, including stacking of pipes at site lead
up to 50 metre:		    
  18.82.1 80 mm diameter C.I. pipe metre 287.05
  18.82.2 100 mm diameter C.I. pipe metre 299.15
  18.82.3 125 mm diameter C.I. pipe metre 310.55
  18.82.4 150 mm diameter C.I. pipe metre 322.15
  18.82.5 200 mm diameter C.I. pipe metre 359.15
  18.82.6 250 mm diameter C.I. pipe metre 395.05
  18.82.7 300 mm diameter C.I. pipe metre 427.40
  18.82.8 350 mm diameter C.I. pipe metre 458.15
  18.82.9 400 mm diameter C.I. pipe metre 486.45
  18.82.10 450 mm diameter C.I. pipe metre 515.45
  18.82.11 500 mm diameter C.I. pipe metre 541.05
  18.82.12 600 mm diameter C.I. pipe metre 586.20
18.83 Labour for cutting C.I. pipe with steel saw.    
  18.83.1 80 mm diameter C.I. pipe each cut 108.90
  18.83.2 100 mm diameter C.I. pipe each cut 146.00
  18.83.3 125 mm diameter C.I. pipe  each cut 202.55
  18.83.4 150 mm diameter C.I. pipe each cut 274.35
  18.83.5 200 mm diameter C.I. pipe each cut 365.95
  18.83.6 250 mm diameter C.I. pipe each cut 455.05
  18.83.7 300 mm diameter C.I. pipe each cut 546.65
  18.83.8 350 mm diameter C.I. pipe each cut 635.75
  18.83.9 400 mm diameter C.I. pipe each cut 727.00
  18.83.10 450 mm diameter C.I. pipe each cut 816.45
  18.83.11 500 mm diameter C.I. pipe each cut 907.70
  18.83.12 600 mm diameter C.I. pipe each cut 1083.50
18.84 Providing & fixing chrome plated brass battery based infrared sensor
operated pillar cock, having foam flow technology.		    
  18.84.1 15 mm nominal bore each 7781.60
18.85 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting
shall be paid for separately) i/c fixing of the pipe with clamps at 1.00
m spacing including cutting and making good the walls including
testing of joints complete as per direction of Engineer-in-charge.
(The pipe length inserted in the fitting shall not be measured for
payment)		    
Inernal work - Exposed on wall
  18.85.1 15.88 mm outer dia pipe metre 325.20
  18.85.2 22.22 mm outer dia Pipe metre 484.00
  18.85.3 28.58 mm outer dia Pipe metre 560.25
  18.85.4 34.00 mm outer dia Pipe metre 737.30
  18.85.5 42.70 mm outer dia Pipe metre 762.95
  18.85.6 48.60 mm outer dia Pipe metre 1000.35
18.86 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting
shall be paid for separately) i/c fixing of the pipe with clamps at
1.00m spacing and also including cutting of chases and making
good the walls including testing of joints complete as per direction of
Engineer -in-charge. (The pipe length inserted in the fitting shall not
be measured for payment)		    
Internal work - Concealed Pipe
  18.86.1 15.88 mm outer dia .Pipes. metre 478.65
  18.86.2 22.22 mm Outer dia pipes metre 637.40
18.87 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Coupling/Socket
  18.87.1 For 15.88 mm outer dia pipe each 78.95
  18.87.2 For 22.22 mm outer dia pipe each 84.30
  18.87.3 For 28.58 mm outer dia pipe each 119.10
  18.87.4 For 34.00 mm outer dia pipe each 175.25
  18.87.5 For 42.70 mm outer dia pipe each 211.40
  18.87.6 For 48.60 mm outer dia pipe each  240.85
18.88 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per dirction of Engineer-in-charge.		    
REDUCER
  18.88.1 For 22.22 mm x 15.88 mm outer dia pipe each 137.80
  18.88.2 For 28.58 mm x 15.88 mm outer dia pipe each 188.65
  18.88.3 For 28.58 mm x 22.22 mm outer dia pipe each 194.00
  18.88.4 For 34.00 mm x 15.88 mm outer dia pipe each 246.20
  18.88.5 For 34.00 mm x 22.22 mm outer dia pipe each 250.20
  18.88.6 For 34.00 mm x 28.58 mm outer dia pipe  each 254.20
  18.88.7 For 42.70 mm x 15.88 mm outer dia pipe each 480.30
  18.88.8 For 42.70 mm x 22.22 mm outer dia pipe each 484.35
  18.88.9 For 42.70 mm x 28.58 mm outer dia pipe each 484.35
  18.88.10 For 42.70 mm x 34.00 mm outer dia pipe each 517.80
  18.88.11 For 48.60 mm x 15.88 mm outer dia pipe each 548.55
  18.88.12 For 48.60 mm x 22.22 mm outer dia pipe each 548.55
  18.88.13 For 48.60 mm x 28.58 mm outer dia pipe each 548.55
  18.88.14 For 48.60 mm x 34.00 mm outer dia pipe each 548.55
  18.88.15 For 48.60 mm x 42.70 mm outer dia pipe each 548.55
18.89 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge		    
Slip Coupling/ Socket
  18.89.1 For 15.88 mm outer dia pipe each 62.90
  18.89.2 For 22.22 mm outer dia pipe each 84.30
  18.89.3 For 28.58 mm outer dia pipe each 119.10
  18.89.4 For 34.00 mm outer dia pipe each 175.25
  18.89.5 For 42.70 mm outer dia pipe each 211.40
  18.89.6 For 48.60 mm outer dia pipe each 227.45
18.90 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Elbow 90°
  18.90.1 For 15.88mm outer dia pipe each 77.60
  18.90.2 For 22.22 mm outer dia pipe each  84.30
  18.90.3 For 28.58 mm outer dia pipe each 128.45
  18.90.4 For 34.00 mm outer dia pipe each 145.85
  18.90.5 For 42.70 mm outer dia pipe each 155.20
  18.90.6 For 48.60 mm outer dia pipe each 200.70
18.91 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Reducing Elbow 90°
  18.91.1 For22.22 mm x 15.88 mm outer dia pipe each 198.00    
  18.91.2 For 28.58 mm x 15.88 mm outer dia pipe each 255.55    
  18.91.3 For 28.58 mm x 22.22 mm outer dia pipe each 295.70    
  18.91.4 For 34.00 mm x 22.22 mm outer dia pipe each 384.00    
  18.91.5 For 34.00 mm x 28.58 mm outer dia pipe each 461.60    
  18.91.6 For 42.70 mm x 34.00 mm outer dia pipe each 239.50    
18.92 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
 		    
Equal Tee
  18.92.1 For 15.88 mm outer dia pipe each 212.75    
  18.92.2 For 22.22 mm outer dia pipe each 309.05    
  18.92.3 For 28.58 mm outer dia pipe each 365.25    
  18.92.4 For 34.00 mm outer dia pipe each 584.70    
  18.92.5 For 42.70 mm outer dia pipe each 913.80    
  18.92.6 For 48.60 mm outer dia pipe each 1186.75    
18.93 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Reducing Tee
  18.93.1 For 22.22 mm x 15.88 mm outer dia pipe each 239.50
  18.93.2 For 28.58 mm x 15.88 mm outer dia pipe each 365.25
  18.93.3 For 28.58 mm x 22.22 mm outer dia pipe each 365.25
  18.93.4 For 34.00 mm x 15.88 mm outer dia pipe each 584.70
  18.93.5 For 34.00 mm x 22.22 mm outer dia pipe each 584.70
  18.93.6 For 34.00 mm x 28.58 mm outer dia pipe each 584.70
  18.93.7 For 42.70 mm x 15.88 mm outer dia pipe each 913.80
  18.93.8 For 42.70 mm x 22.22 mm outer dia pipe each 913.80
  18.93.9 For 42.70 mm x 28.58 mm outer dia pipe each 913.80
  18.93.10 For 42.70 mm x 34.00 mm outer dia pipe each 913.80
  18.93.11 For 48.60 mm x 15.88 mm outer dia pipe each 1186.75
  18.93.12 For 48.60 mm x 22.22 mm outer dia pipe each 1186.75
  18.93.13 For 48.60 mm x 28.58 mm outer dia pipe each 1186.75
  18.93.14 For 48.60 mm x 34.00 mm outer dia pipe each  1186.75
  18.93.15 For 48.60 mm x 42.70 mm outer dia pipe each 1186.75
18.94 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Male Thread Tee
  18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 239.50
  18.94.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 267.60
  18.94.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 274.30
  18.94.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each  365.25
  18.94.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 365.25
  18.94.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 365.25
  18.94.7 For 34.00 mm outer dia x 15 mm nominal dia threaded each 584.70
  18.94.8 For 34.00 mm outer dia x 20 mm nominal dia threaded each 584.70
  18.94.9 For 34.00 mm outer dia x 25 mm nominal dia threaded each 584.70
  18.94.10 For 34.00 mm outer dia x 32 mm nominal dia threaded each 584.70
  18.94.11 For 42.70 mm outer dia x 15 mm nominal dia threaded each 913.80
  18.94.12 For 42.70 mm outer dia x 20 mm nominal dia threaded each 913.80
  18.94.13 For 42.70 mm outer dia x 25 mm nominal dia threaded each 913.80
  18.94.14 For 42.70 mm outer dia x 32 mm nominal dia threaded each 913.80
  18.94.15 For 42.70 mm outer dia x 40 mm nominal dia threaded each 913.80
  18.94.16 For 48.60 mm outer dia x 15 mm nominal dia threaded each  1186.75
  18.94.17 For 48.60 mm outer dia x 20 mm nominal dia threaded each 1186.75
  18.94.18 For 48.60 mm outer dia x 25 mm nominal dia threaded each  1186.75
  18.94.19 For 48.60 mm outer dia x 32 mm nominal dia threaded each 1186.75
  18.94.20 For 48.60 mm outer dia x 40 mm nominal dia threaded each  1186.75
  18.94.21 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1186.75
18.95 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Female Thread Tee
  18.95.1 For 15.88 mm outer dia x15 mm nominal dia threaded each 239.50
  18.95.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 267.60
  18.95.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 267.60
  18.95.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each 365.25
  18.95.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 365.25
  18.95.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 365.25
  18.95.7 For 34.00 mm outer dia x 15 mm nominal dia threaded each 584.70
  18.95.8 For 34.00 mm outer dia x 20 mm nominal dia threaded each 584.70
  18.95.9 For 34.00 mm outer dia x 25 mm nominal dia threaded each 584.70
  18.95.10 For 34.00 mm outer dia x 32 mm nominal dia threaded each 584.70
  18.95.11 For 42.70 mm outer dia x 15 mm nominal dia threaded each 913.80
  18.95.12 For 42.70 mm outer dia x 20 mm nominal dia threaded each 913.80
  18.95.13 For 42.70 mm outer dia x 25 mm nominal dia threaded each 913.80
  18.95.14 For 42.70 mm outer dia x 32 mm nominal dia threaded each 913.80
  18.95.15 For 42.70 mm outer dia x 40 mm nominal dia threaded each 913.80
  18.95.16 For 48.60 mm outer dia x 15 mm nominal dia threaded each 1186.75
  18.95.17 For 48.60 mm outer dia x 20 mm nominal dia threaded each 1186.75
  18.95.18 For 48.60 mm outer dia x 25 mm nominal dia threaded each  1186.75
  18.95.19 For 48.60 mm outer dia x 32 mm nominal dia threaded each 1186.75
  18.95.20 For 48.60 mm outer dia x 40 mm nominal dia threaded each 1186.75
  18.95.21 For 48.60 mm outer dia x 50 mm nominal dia threaded each  1186.75
Female Thread Connector/ Adapter
  18.96.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 254.20
  18.96.2 For 22.22 mm outer dia x 15 mmnominal dia threaded each 307.75
  18.96.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 317.10
  18.96.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each 370.60
  18.96.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 382.65
  18.96.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 450.90
  18.96.7 For 34.00 mm outer dia x 25 mm nominal dia threaded each 547.20
  18.96.8 For 34.00 mm outer dia x 32 mm nominal dia threaded each 719.80
  18.96.9 For 42.70 mm outer dia x 32 mm nominal dia threaded each 770.65
  18.96.10 For 42.70 mm outer dia x 40 mm nominal dia threaded each 911.15
  18.96.11 For 48.60 mm outer dia x 40 mm nominal dia threaded each 1121.20
  18.96.12 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1291.10
18.97 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Male Thread Connector/ Adapter
  18.97.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 258.20
  18.97.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 303.70
  18.97.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 331.80
  18.97.4 For 28.58 mm outer dia x 20 mm nominal dia threaded each 418.75
  18.97.5 For 28.58 mm outer dia x 25 mm nominal dia threaded each 428.15
  18.97.6 For 34.00 mm outer dia x 25 mm nominal dia threaded each 616.80
  18.97.7 For 34.00 mm outer dia x 32 mm nominal dia threaded each 755.95
  18.97.8 For 42.70 mm outer dia x 32 mm nominal dia threaded each 868.30
  18.97.9 For 42.70 mm outer dia x 40 mm nominal dia threaded each 971.35
  18.97.10 For 48.60 mm outer dia x 40 mm nominal dia threaded each  1123.85
  18.97.11 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1522.55
18.98 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Valve Connector
  18.98.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 313.10
  18.98.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 369.25
  18.98.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 394.70
  18.98.4 For 28.58 mm outer dia x 25 mm nominal dia threaded each 567.30
  18.98.5 For 34.00 mm outer dia x 32 mm nominal dia threaded each 841.55
  18.98.6 For 42.70 mm outer dia x 40 mm nominal dia threaded each  1170.70
  18.98.7 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1573.40
18.99 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Female Threaded Elbow 90°
  18.99.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 200.70
  18.99.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 255.55
  18.99.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 255.55
  18.99.4 For 25.58 mm outer dia x 25 mm nominal dia threaded each 274.30
  18.99.5 For 34.00 mm outer dia x 32 mm nominal dia threaded each 384.00
  18.99.6 For 42.70 mm outer dia x 32 mm nominal dia threaded each 639.55
  18.99.7 For 42.70 mm outer dia x 40 mm nominal dia threaded each 639.55
  18.99.8 For 48.60 mm outer dia x 40 mm nominal dia threaded each 913.80
  18.99.9 For 48.60 mm outer dia x 50 mm nominal dia threaded each 913.80
18.100 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Male Threaded Elbow 90°
  18.100.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 255.55
  18.100.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 274.30
  18.100.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 274.30
  18.100.4 For 28.58 mm outer dia x 25 mm nominal dia threaded each 274.30
  18.100.5 For 34.00 mm outer dia x 25 mm nominal dia threaded each 384.00
  18.100.6 For 34.00 mm outer dia x 32 mm nominal dia threaded each 384.00
  18.100.7 For 42.70 mm outer dia x 32 mm nominal dia threaded each 639.55
  18.100.8 For 42.70 mm outer dia x 40 mm nominal dia threaded each 639.55
  18.100.9 For 48.60 mm outer dia x 40 mm nominal dia threaded each 913.80
  18.100.10 For 48.60 mm outer dia x 50 mm nominal dia threaded each 913.80
18.101 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Cap
  18.101.1 For 15.88 mm outer dia pipe each 60.20
  18.101.2 For 22.22 mm outer dia pipe each 85.65
  18.101.3 For 28.58 mm outer dia pipe each 112.40
  18.101.4 For 34.00 mm outer dia pipe each 218.10
  18.101.5 For 42.70 mm outer dia pipe each 315.75
  18.101.6 For 48.60 mm outer dia pipe each 400.05
18.102 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.		    
Pipe Bridge
  18.102.1 For 15.88 mm outer dia pipe each 286.30
  18.102.2 For 22.22 mm outer dia pipe each 362.60
  18.102.3 For 28.58 mm outer dia pipe each 544.55

****