WOOD & PVC WORK



WOOD AND P.V.C. WORK

Code NO:

 Description Unit Rate
0100 Bandhani day 617.00
0101 Bhisti day 617.00
0102 Blacksmith 1st class day 738.00
0103 Blacksmith 2nd class day 679.00
0111 Carpenter 1st class day 738.00
0112 Carpenter 2nd class day 679.00
0114 Beldar day 558.00
0116 Fitter (grade 1) day 738.00
0119 Glazier day 679.00
0123 Mason (brick layer) 1st class day 738.00
0124 Mason (brick layer) 2nd class day 679.00
0130 Mistry day 738.00
0131 Painter day 679.00
0156 Carpenter (average) day 709.00
0162 Labour for fabrication of uPVC extruded casement/ sliding windowsand doors including drilling holes, fixing of fittings & hardwares, hire
charges of drill machine and electricity charges etc.		 sqm 485.00
0163 Labour for installation of uPVC extruded casement/ sliding windows
and doors including scaffolding		 sqm 430.00
0237 Multi purpose fibre (high impact poly propelene reinforced) cement
board 8 mm thick		 sqm 220.00
0243 8 mm thick mulitipurpose cement bonded wood particle board
conforming to IS : 14276		 sqm 215.00
0305 Bamboo 25 mm dia 2.5 metre long score 400.00
3410 Flat pressed 3 layer particle board (medium density) Grade 1,
12 mm thick		 sqm 288.00
0346 Extra for veneered particle board with Teak veneering on one side
and commercial veneering on other side		 sqm 230.00
0347 Extra for veneered particle board with Commercial veneering on
both sides		 sqm 155.00
0348 Extra for veneered particle board with Teak veneering on both sides sqm 500.00
0378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 775.00
0379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 1 625.00
0380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 380.00
0381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 155.00
0382 Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg) 10 Nos 1309.00
0383 Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg) 10 Nos 997.00
0384 Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not
less than 0.20 kg)		 10 Nos 838.00
0385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos 2610.00
0386 Brass parliamentary hinges 125x125x27x5 mm 10 Nos 2300.00
0387 Brass parliamentary hinges 100x125x27x5 mm 10 Nos 2090.00
0388 Brass parliamentary hinges 75x100x20x3.2 mm 10 Nos 1870.00
0400 Brass tower bolt (barrel type) 250x10 mm each 257.00
0401 Brass tower bolt (barrel type) 200x10 mm each 205.00
0402 Brass tower bolt (barrel type) 150x10 mm each 154.00
0403 Brass tower bolt (barrel type) 100x10 mm each 103.00
0408 Brass handles 125 mm with plate 175x32 mm each 144.00
0409 Brass handles 100 mm with plate 150x32 mm each 133.00
0410 Brass handles 75 mm with plate 125x32 mm each 103.00
0411 Brass door latch 300x16x5 mmweighing not less than 0.380 kg each  185.00
0412 Brass door latch 250x16x5 mm weighing not less than 0.350 kg each 175.00
0412  Brass door latch 250x16x5 mm weighing not less than 0.350 kg each 175.00
0413 Brass mortice latch and lock 100x65 mm with 6 levers and a pair
of brass lever handles		 each 400.00
0414 Brass mortice latch 100x65mm with a pair of brass lever handles each 310.00
0423 Brass casement window fastener each 45.00
0424 Brass casement stays (straight peg type) 300 mm weighing not
less than 0.33 kg		 each 126.00
0425 Brass casement stays (straight peg type) 250 mm weighing not
less than 0.28 kg		 each 100.00
0426 Brass casement stays (straight peg type) 200 mm weighing not
less than 0.24 kg		 each 95.00
0431 Brass hasps and staples (safety type) 150 mm 10 Nos 740.00
0432 Brass hasps and staples (safety type) 115 mm 10 Nos 670.00
0433 Brass hasps and staples (safety type) 90 mm 10 Nos 575.00
0438 Brass night latch each 610.00
0447 Brass cupboard knob or wardrobe knob 50 mm each 36.00
0449 Brass screws 50 mm 100 Nos 220.00
0450 Brass screws 40 mm 100 Nos 170.00
0451 Brass screws 30 mm 100 Nos 140.00
0452 Brass screws 25 mm 100 Nos 100.00
0453 Brass screws 20 mm 100 Nos 95.00
0555 Chromium plated Brass handles 125 mm with plate 175 x32 mm each 160.00
0556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm each 140.00
0557 Chromium plated Brass handles 75mm with plate 125x32 mm each 125.00
0558 Chromium plated Brass mortice latch and lock 100x65 mm with
6 levers and a pair of brass lever handles		 each 470.00
0568 Chromium plated brass casement window fastener each 90.00
0569 Chromium plated Brass casement stays (straight peg type)
300 mm weighing not less than 0.33 kg		 each 140.00
0570 Chromium plated Brass casement stays (straight peg type)
250 mm weighing not less than 0.28 kg		 each 120.00
0571 Chromium plated Brass casement stays (straight peg type)
200 mm weighing not less than 0.24 kg		 each 100.00
0583 Chromium plated Brass Night latch each 500.00
0584 Chromium plated Brass Wardrobe Knob 50 mm each 80.00
0585 Chromium plated Brass screws 50 mm 100 Nos 300.00
0586 Chromium plated Brass screws 40 mm 100 Nos 290.00
0587 Chromium plated Brass screws 30 mm 100 Nos 240.00
0588 Chromium plated Brass screws 25 mm 100 Nos 180.00
0589 Chromium plated Brass screws 20 mm 100 Nos 160.00
0590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre 185.00
0591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick metre 260.00
0592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick metre 340.00
0594 Bright finished or black enameled mild steel butt hinges125x65x 2.12 mm 10 Nos 135.00
0595 Bright finished or black enameled mild steel butt hinges
100x58x 1.90 mm		 10 Nos 80.00
0596 Bright finished or black enameled mild steel butt hinges
75x47x 1.70 mm 0		 10 Nos 56.00
0597 Bright finished or black enameled mild steel butt hinges
50x37x 1.50 mm		 10 Nos 49.00
0608 Nickel plated bright finished mild steel piano hinges 1 mm thick
25 mm		 wide metre 39.00
0635 Bright finished or black enameled mild steel screws 50 mm 100 Nos 75.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00
0638 Bright finished or black enameled mild steel screws 30 mm 100 Nos 45.00
0639 Bright finished or black enameled mild steel screws 25 mm 100 Nos 36.00
0640 Bright finished or black enameled mild steel screws 20 mm 100 Nos 30.00
0641 Bright finished or black enameled mild steel bolts and nuts
50x6 mm		 each 5.00
0642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos 130.00
0643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos 85.00
0644 Oxidised mild steel butt hinges 75x47x1.70 mm 10 Nos 63.00
0645 Oxidised mild steel butt hinges 50x37x1.50 mm 10 Nos 53.00
0646 Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 10 Nos 334.00
0647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos 309.00
0648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 10 Nos 231.00
0649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 10 Nos 196.00
0650 Oxidised mild steel single acting spring hinges 150 mm each 138.00
0651 Oxidised mild steel single acting spring hinges 125 mm each 118.00
0652 Oxidised mild steel single acting spring hinges 100 mm each 98.00
0653 Oxidised mild steel double acting spring hinges 150 mm each 157.00
0654 Oxidised mild steel double acting spring hinges 125 mm each 135.00
0655 Oxidised mild steel double acting spring hinges 100 mm each 118.00
0656 Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre 44.00
0660 Oxidised mild steel sliding door bolt 300x16 mm each 93.00
0661 Oxidised mild steel sliding door bolt 250x16 mm each 84.00
0662 Oxidised mild steel door latch 300x20x6 mm each 49.00
0663 Oxidised mild steel door latch 250x20x6 mm each 39.00
0664 Oxidised mild steel tower bolt (barrel type) 250x10 mm each 43.00
0665 Oxidised mild steel tower bolt (barrel type) 200x10 mm each 34.00
0666 Oxidised mild steel tower bolt (barrel type) 150x10 mm each 29.00
0667 Oxidised mild steel tower bolt (barrel type) 100x10 mm each 20.00
0668 Oxidised mild steel handles 125 mm each 20.00
0669 Oxidised mild steel handles 100 mm each 15.00
0670 Oxidised mild steel handles 75 mm each 12.00
0679 Oxidised mild steel hasps and staples (safety type) 150 mm 10 Nos 128.00
0680 Oxidised mild steel hasps and staples (safety type) 115 mm 10 Nos 108.00
0681 Oxidised mild steel hasps and staples (safety type) 90 mm 10 Nos 79.00
0682 Oxidised mild steel screws 50 mm 100 Nos 76.00
0683 Oxidised mild steel screws 40 mm 100 Nos 62.00
0684 Oxidised mild steel screws 30 mm 100 Nos 49.00
0685 Oxidised mild steel screws 25 mm 100 Nos 36.00
0686 Oxidised mild steel screws 20 mm 100 Nos 32.00
0687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos 560.00
0688 Anodised Aluminium butt hinges 125x63x4 mm 10 Nos 393.00
0689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos 393.00
0690 Anodised Aluminium butt hinges 100x63x3.2 mm 10 Nos 270.00
0691 Anodised Aluminium butt hinges 100x63x4 mm 10 Nos 324.00
0692 Anodised Aluminium butt hinges 75x63x4 mm 10 Nos 275.00
0693 Anodised Aluminium butt hinges 75x63x3.2 mm 10 Nos 226.00
0694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 Nos 196.00
0696 Anodised Aluminium sliding door bolt 300x16 mm each 147.00
0697 Anodised Aluminium sliding door bolt 250x16 mm each  128.00
0698 Anodised Aluminium tower bolt (barrel type) 300x10 mm 10 Nos 580.00
0699 Anodised Aluminium tower bolt (barrel type) 250x10 mm 10 Nos 481.00 10 Nos  481.00
0700 Anodised Aluminium tower bolt (barrel type) 200x10 mm 10 Nos  383.00
0701 Anodised Aluminium tower bolt (barrel type) 150x10 mm 10 Nos 304.00
0702 Anodised Aluminium tower bolt (barrel type) 100x10 mm 10 Nos 226.00
0703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos 324.00
0704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos 275.00
0705  Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos 231.00
0706 Anodised Aluminium kicking plate 50 cm long 100x3.15 mm each 142.00
0713 Block board construction flush door with teak wood ply on both
faces 35 mm thick sqm 1800.00		 sqm  1800.00
0714 Block board construction flush door with teak wood ply on both
faces 30 mm thick		 sqm 1600.00
0715 Block board construction flush door with teak wood ply on both
faces 25 mm thick		 sqm 1400.00
0717 Block board construction flush door with commercial ply on both
faces 35 mm thick		 sqm 950.00
0718  Block board construction flush door with commercial ply on both
faces 30 mm thick		 sqm 900.00
0719 Block board construction flush door with commercial ply on both
faces 25 mm thick		 sqm 890.00
0752 Block board construction flush door lipping 25 mm thick sqm of
door area		 300.00
0753 Square vision panel in Block board construction flush door not sqm of
exceeding 0.10		 sqm door area 130.00
0754 Circular vision panel in Block board construction flush door sqm of
door area		 135.00
0755 Decorative type louvers in Block board construction flush door sqm of
door area		 265.00
0757 Rebate cutting in block board construction flush door sqm of
door area		 70.00
0759 Decorative plywood 4 mm sqm 320.00
0763 Glue kg 75.00
0834 Synthetic enamel paint in all shades except black or chocolate
shade		 litre  160.00
0869 Plaster of Paris kg 5.00
1003 Mild steel round bar above 12 mm dia quintal 4400.00
1008 Flats up to 10 mm in thickness quintal 4500.00
1015 Mild steel expanded metal 20x60 mm strands quintal 4400.00
1.60 mm thick sqm 280.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not
less than 7.75 kg/sqm		 sqm 430.00
1022 Galvanised steel bolts & nuts 6 mm dia and 25 mm long round
head with slots		 10 Nos 38.00
1189 Second class teak wood in scantling 10cudm 776.00
1190 Second class teak wood in planks 10 cudm 791.00
1199 Sal wood in scantling 10 cudm 600.00
1200 Kiln seasoned selected sheesham wood planks 10 cudm 650.00
1211 G.I. plain washer for seam bolts 100 Nos 32.00
1231 Extra for selected planks of second class teakwood 10 cudm 150.00
1238 Extra for selected planks of first class teakwood 10 cudm 150.00
2204 Carriage of Timber cum 118.59
2205 Carriage of Steel tonne 92.24
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 112.79
2207 Carriage of Brick tiles 1000 Nos 166.03
2406 Float glass panes of nominal thickness 4 mm (weight not less
than 10 kg/sqm)		 sqm 300.00
2407 Float glass panes of nominal thickness 5 mm (weight not less
than 12.50 kg/sqm)		 sqm 500.00
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 300.00
2413 12 mm commercial ply sqm 500.00
2414 18 mm thick block board with commercial ply veneering on
both side		 sqm 760.00
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x42 mm with screws, bolts, nuts and washers complete each 60.00
2451 Brass cupboard lock 6 levers of approved quality, 40 mm size each 55.00
2452 Brass cupboard lock 6 levers of approved quality, 50 mm size each 85.00
2453 Brass cupboard lock 6 levers of approved quality, 65 mm size each 90.00
2454 Brass cupboard lock 6 levers of approved quality, 75 mm size each 105.00
2455 Brass hanging type door stopper 150 mm each 75.00
2456 Hydraulic door closer bottle type M.S. body with necessary
accessories and screws complete		 each 673.00
2459 Anodised Aluminium hanging type door stopper each 19.00
2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x42 mm with screws, bolts, nuts and washers complete each 46.00
2465 Anodised Aluminium Casement stay 250 mm each 32.00
2466 Hollock wood in scantling  10cudm 350.00
2468 Nickled Chromium Brass cupboard lock 40 mm size each 60.00
2469 Nickled Chromium Brass cupboard lock 50 mm size each 70.00
2470 Nickled Chromium Brass cupboard lock 65 mm size each 95.00
2471 Nickled Chromium Brass cupboard lock 75 mm size each 120.00
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm 850.00
2481 Ply wood 5 ply with teak ply on one face and commercial ply
on another face 9 mm thick		 sqm 870.00
2483 Ply wood 7 ply with teak ply on one face and commercial ply
on another face 9 mm thick		 sqm 950.00
2484 Pre-laminated with decorative lamination on both side exterior
Grade-I MDF Board 12 mm thick confirming to IS:14587		 sqm 460.00
2485 Pre-laminated with decorative lamination on both side exterior
Grade-I MDF Board 18 mm thick confirming to IS:14587		 sqm 597.00
2486 Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade-I MDF Board 25 mm
thick confirming to IS: 14587		 sqm 860.00
2487 Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade-I MDF Board 12 mm
thick confirming to IS:14587		 sqm 430.00
2488 Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade-I MDF Board 18 mm
thick confirming to IS:14587		 sqm 565.00
2489 PVC edge bending tape 2.00 mm thick metre 20.00
2504 Kiln seasoning of timber cum 750.00
2505 Hollock wood in planks 10 cudm 390.00
2640 Glass panes of required thickness having 120 minutes of fire
resistance both intensity and radiation control (EW 120) and
minimum 20 minutes of insulation (EI 20) s		 sqm 25000.00
2641 G.I U beading of 1.6 mm thick G.I sheet with ceramic tape. metre 245.00
2642 Ceramic tape 5 x20 mm size metre 410.00
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series
casement window/door frame, sash, mullion & small series sliding
window frame		 metre 66.00
3992 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement window/door frame, sash, mullion, big & small series
sliding window frame		 metre 71.00
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
casement door sash		 metre 97.00
3994 Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series
sliding window / door sash		 metre 86.00
3995 G.I fasteners 100 x 8 mm each 14.00
4009 Mild steel tubes hot finished welded type kg 57.00
7001 Brass 100mm mortice latch and lock with 6 levers without pair
of handles		 each 210.00
7003 Pair of Anodised Aluminium lever handles for 100 mm mortice latch
and lock		 each 215.00
7009 12.5 mm thick tapered edge plain Gypsum board confirming to
IS 2095 (Part- I) : 2011		 sqm 155.00
7018 Joint tape roll roll 100.00
7019 Dash fastener / Chemical fastener each 14.00
7020 All drive screws (for gypsum board) 100 Nos 58.00
7021 Primer (for gypsum board)  litre 85.00
7023 Chromium plated brackets (curtain rods) each 7.00
7029 Galvanised wire mesh of average width of aperture 1.4 mm and
nominal dia of wire 0.63 mm		 sqm 250.00
7030 12.5 mm thick tapered edge gypsum fire rated board confirming
to IS 2095 Part- I		 sqm 245.00
7031 12.5mm thick tapered edge gypsum moisture resistant) sqm 275.00
7032 Frosted glass sheet of nominal thickness 4 mm (weighing not
less than 10 kg/sqm)		 sqm 460.00
7033 Nickel plated M.S. pipe 25 mm dia metre 76.00
7034 Nickel plated M.S. pipe 20 mm dia metre 72.00
7035 Nickel plated M.S. Brackets for curtain rod 20 mm each 7.00
7036 Nickel plated M.S - Brackets for curtain rod 25 mm each 8.00
7040 Oxidised mild steel screws 35 mm 100 Nos 48.00
7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia metre 42.00
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia metre 54.00
7048 Rawl plug 50 mm (designation 10 nos) each 25.00
7049 Teak wood lipping of size 25x3 mm in pelmets metre 14.00
7055 Flat pressed 3 layer and graded particle board (medium density)
Grade 1 conforming to IS : 3087 - 18 mm thick		 sqm 480.00
7056 Aluminium tee channel (heavy duty) with rollers and stop end metre 100.00
7059 Aluminium hanging floor door stopper with twin rubber & stopper each 40.00
7060 Hydraulic door closer tubular type Aluminium section body each 560.00
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less
than 0.33 kg		 each 35.00
7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less
than 0.28 kg		 each 30.00
7065 Oxidised M.S. casement stay (straight peg type) 200 mm not less
than 0.24 kg		 each 25.00
7137 Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick
plain type-I, medium density flat pressed three layer, graded particle
board (FPT-I) as per IS:3087 bonded with BWP type synthetic
resin adhesive, as per IS:848		 sqm 1620.00
7139 Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick
both sides prelaminated type-I, medium density flat pressed three
layer, graded particle board (FPT-I) as per IS:3087 bonded with
BWP type synthetic resin adhesive, as per IS:848		 sqm 1720.00
7143 Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of 12 mm thick one
side prelaminated type-I, and other side balancing lamination, medium
density flat pressed three layer, graded particle board (FPT-I)
as per IS:3087 bonded with BWP type synthetic resin adhesive,
as per IS:848		 sqm 1910.00
7151 Factory made 30 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of sheet glass
using 10 kg/ sqm glass panes		 sqm 1620.00
7154 Factory made 35 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of galvanised wire
gauge with average width of aperture 1.4 mm in both directions
with wire of dia 0.63 mm		 sqm 1620.00
7155 Factory made 30 mm thick shutters with laminated veneer lumber
styles & rails as per TADS 15:1995 and panels of galvanised wire
gauge with average width of aperture 1.4 mm in both directions
with wire of dia 0.63 mm

 sqm

 1430.00
7157 Laminated veneer lumber confirming to TADS 15:1995 manufac
tured in factory in frames of doors, windows 10		 cudm 700.00
7184 Oxidised M.S. safety chain (weighing not less than 450 gms)
for door		 each 57.00
7269 25 mm thick particle board sqm 460.00
7271 Second class teak wood lipping 25 mm wide x 12 mm thick metre 29.00
7272 25 mm thick melamine faced prelaminated three layer particle
board		 sqm 900.00
7307 For flush door shutters Extra for providing teak veneering on
one side instead of commercial veneering		 sqm 330.00
7312 Expandable fastener with plastic sleeve and M.S. screws :
25 mm long		 each 10.00
7313 Expandable fastener with plastic sleeve and M.S. screws :
32 mm long		 each 10.00
7314 Expandable fastener with plastic sleeve and M.S. screws :
40 mm long		 each 13.00
7315 Expandable fastener with plastic sleeve and M.S. screws.
50 mm long		 each 14.00
7349 12 mm M.S. 'U' beading metre 14.00
7366 Glass reinforced Gypsum ( GRG) board 12.5 mm thick confirming
to IS 2095 (Part- 3) : 1996		 sqm 240.00
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section
of size 50x32 mm		 metre 71.00
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm metre 71.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 11.00
7390 EPDM Gasket for uPVC window/door metre 14.00
7443 Aluminium single cleat of size 30x32x3 mm each 14.00
7444 Aluminium grip strip of size 50x12x2 mm each 11.00
7445 25 mm thick prelaminated flush door shutter both side decorative

sqm

 800.00
7449 Aluminium U beading kg 210.00
7451 Glass sheet (Pin headed) sqm 305.00\\
7468 Veneered particle board with commercial veneering on both sides
12 mm thick		 sqm 500.00
7477 Prelaminated particle board with one side decorative and other
side balancing lamination, flat pressed 3 layer & graded (medium
density) Grade i, Type II conforming to IS : 12823 (exterior grade)
12 mm thick		 sqm 540.00
7478 Prelaminated particle board with one side decorative and other
side balancing lamination, flat pressed 3 layer & graded (medium
density) Grade I, Type II conforming to IS : 12823 (exterior grade)
18 mm thick		 sqm 650.00
7479 Prelaminated particle board with one side decorative and other
side balancing lamination, flat pressed 3 layer & graded (medium
density) Grade I, Type II conforming to IS : 12823 (exterior grade)
25 mm thick		 sqm 900.00
7480 Prelaminated particle board with both sides decorative lamination,
flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 12 mm thick		 sqm 575.00
7485 Oxidised M. S. hinges finished with nickel plating 50 mm
(Over all width)		 metre 40.00
7486 Oxidised M. S. hinges finished with nickel plating 65 mm
(Over all width)		 metre 52.00
7512 PTMT handle 125x34x24 mm each 24.00
7513 PTMT handle 150x34x24 mm each 24.00
7514 PTMT butt hinges 75x60x10 mm each 33.00
7515 PTMT butt hinges 100x75x10 mm each 43.00
7516 PTMT Tower bolt 152x42x18 mm each 48.00
7517 PTMT Tower bolt 202x42x18 mm each 24.00
7518 PTMT door catcher 72x42 mm each 24.00
7552 Coir veneered board 4 mm thick sqm 290.00
7553 Coir veneered board 6 mm thick sqm 385.00
7555 Coir veneered board 12 mm thick sqm 670.00
7556 Coir veneered board 18 mm thick sqm 1000.00
8001 24 mm thick Factory made shutters with style, rails and panels of
PVC extruded sections in white, grey or wooden finish		 sqm 1085.93
8002 30 mm thick Factory made shutters with style, rails and panels of
PVC extruded sections in white, grey or wooden finish		 sqm 1248.82
8003 Factory made PVC rigid foam panelled shutter i/c carriage sqm 1547.45
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020
i/c carriage		 sqm 1547.45
8006 Factory made PVC rigid foam sheet 1 mm thick sqm 155.80
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC
extruded sections in white, grey or wooden finish		 metre 125.79
8011 Factory made door frame PVC extruded sheet i/c carriage metre 251.58
8014 Factory made door frame of size 50x47 mm with wall thickness
5 mm made of single piece extruded profile		 metre 298.74
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm 8.50
8017 Fire rated door frame made with 1.6 mm thick G.I sheet
(120 minutes fire rating)		 metre 1000.00
8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120
minutes fire rating) including hinges ( without glass panels)		 sqm 5000.00
8100 Powder coated M.S. butt hinges 100 mm X58 mmX1.9 mm 10 Nos 123.00
8101 SS ball bearing of size 100 x89x3mm each 450.00
8116 Zinc alloy (white powder coated) 3D Hinges for uPVC door each 451.00
8117 Zinc alloy (white powder coated) handles with zinc plated mild
steel multi point locking having transmission gear, cylinder with
keeps and one side key for uPVC casement door		 each set 2296.00
8118 Zinc alloy (white powder coated) handles along with zinc plated
mild steel multi point locking having transmission gear with keeps
for uPVC sliding window		 each set 1 394.00
8119 Zinc alloy (white powder coated) handles with key along with zinc
plated mild steel multi point locking having transmission gear with
keeps for uPVC sliding door		 each set 1150.00
8121 uPVC extruded (small series) casement window frame size
47x50mm		 metre 258.30
8122 uPVC extruded (small series) casement window sash/window
mullion size 47x68 mm		 metre 282.90
8125 uPVC extruded glazing bead of appropriate dimension for small
series casement window Sash		 metre 98.40
8126 uPVC extruded (big series) casement window frame size 67x60 mm metre 319.80
8127 uPVC extruded (big series) casement door frame size 67x64 mm metre 360.80
8128 uPVC extruded (big series) casement window sash/window
mullion/door mullion size 67x80 mm		 metre 426.40
8129 uPVC extruded (big series) casement door sash size 67x110 mm metre 516.60
8130 uPVC extruded glazing bead of appropriate dimension for big
series casement window/door sash		 metre 123.00
8131 uPVC extruded glazing bead of appropriate dimension for small
series sliding window sash		 metre 60.00
8132 uPVC extruded glazing bead of appropriate dimension for big
series of sliding window/ door sash		 metre 85.00
8133 uPVC extruded (small series) 2 track sliding window frame
size 52x44 mm		 metre 285.00
8134 uPVC extruded (big series) 2 track sliding window/door frame
size 67x50mm		 metre 385.00
8135 uPVC extruded (small series) 3 track sliding window frame size
92x44 mm		 metre 380.00
8136 uPVC extruded (big series) 3 track sliding window/door frame
size 116x45mm		 metre 530.00
8137 uPVC extruded (small series) 2 track sliding window sash/3
track sliding window sash size 32x60mm		 metre 265.00
8138 uPVC extruded (big series) 2 track sliding window sash size
46x62mm		 metre 325.00
8139 uPVC extruded (big series) 3 track sliding window sash size
46x62mm		 metre 325.00
8140 uPVC extruded interlock of appropriate dimension for small
series sliding window sash		 metre 80.00
8141 uPVC extruded interlock of appropriate dimension for big
series sliding window/ door sash		 metre 90.00
8142 uPVC extruded inline adaptor of appropriate dimension for big
series sliding window/door sash		 metre 90.00
8143 uPVC extruded 2 track sliding door sash/ 3 track sliding door
sash (big series) size 46x82mm		 metre 350.00
8210 Stainless steel screws 50 mm 100 Nos 270.00
8211 Stainless steel screws 40 mm 100 Nos 215.00
8212 Stainless steel screws 30 mm 100 Nos 190.00
8214 Stainless steel screws 20 mm 100 Nos 125.00
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 265.00
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked 10 Nos 235.00
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked 10 Nos  
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos 135.00
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm
IS :12817 marked		 10 Nos 350.00
8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm
IS :12817 marked 1		 10 Nos 255.00
8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm
IS :12817 marked		 10 Nos 205.00
8222 M.S. heavy weight butt hinges 125x90x4.0 mm IS: 1341 marked. 10 Nos 210.00
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked 10 Nos 160.00
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 Nos 95.00
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 Nos 80.00
8647 Stainless steel screws 30 x 4 mm 100 Nos 32.00
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges metre 42.00
8699 8 mm thick tapered edge calcium silicate board sqm 265.00
8700 10 mm thick calcium silicate board sqm 420.00
8703 Telescopic drawer channels 300 mm long set 230.00
8704 Stainless steel roller for sliding arrangement in racks/ cupboards/
cabinets shutter		 each 9.00
8738 Factory made door frame fire rated (60 minutes) made with 16
SWG G.I. Sheet of section 143 mm x 57 mm duly filled with
vermuculite based concrete mix		 metre 1050.00
8739 Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes)
without panel		 sqm 4500.00
8740 Fire seal Putty kg 295.00
8741 Clear fire resistant glass panes 6mm thick (60 minutes) sqm 21500.00
8742 G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/ m²)
with ceramic tape of suitable thickness and fire resistant primer
coating		 metre 295.00
8743 Matrix Mineral Board metre 68.00
8744 Panic Bar / latch (Double point) each 5200.00
8745 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC
extruded section in white, grey or wooden finish		 metre 355.00
8746 37 mm thick Factory made shutter with style,rails and panels of
PVC extruded section in white or grey finish i/c carriage		 sqm 2400.00
8747 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC
extruded section in white, grey or wooden finish		 metre 400.00
8748 37 mm thick Factory made fusion welded shutter with style,
rails and panels of PVC extruded section in wooden finish sqm 2600.00
8749 Zinc alloy (white powder coated) touch lock with hook for wire
mesh shutter		 each 120.00
8750 Zinc alloy (white powder coated) casement handle for uPVC
window/door		 each 130.00
8751 Zinc alloy (white powder coated) touch lock withhook for uPVC
window/door		 each 105.00
8752 Zinc alloy body with single nylon roller (weight bearing capacity
to be 40 Kg) for uPVC sliding window		 each 56.00
8753 Stainless Steel (SS - 304) with adjustable double nylon roller
(weight bearing capacity to be 120 Kg) for uPVC sliding door/
window		 each 95.00
8754 Zinc alloy (white powder coated) cresent lock for uPVC sliding
door/window		 each  115.00
8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for
uPVC windows		 each 205.00
8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for
uPVC windows		 each 230.00
8757 Stainless steel friction hinges (SS-304 grade) size 300 x 19 x
1.9 mm for uPVC window		 each 245.00
8758 Stainless steel friction hinges (SS-304 grade) size 350 x 19 x
1.9 mm for uPVC window		 each 345.00
8759 Stainless steel friction hinges (SS-304 grade) size 400 x 19 x
1.9 mm for uPVC window		 each 365.00
8760 Glass panes of required thickness having 60 minutes of fire resistance
both integrity and radiation control (EW 60) and minimum 20 minutes
of insulation (EI 20)		 sqm 22500.00
8772 Aluminium Track on bottom rail for uPVC window  metre 30.00
8773 Wool pile/ weather pile strip for uPVC sliding window metre 20.00
8774 Aluminium Grill as per IS 1868 kg 260.00
8775 Steel Galvanised tubular reinforcement for uPVC door/ window metre 60.00
8776 GI Fastener 100x8 mm  each 15.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00
9.0 WOOD AND P. V. C. WORK
FRAMES AND TRUSSES
9.1 Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately).		    
  9.1.1 Second class teak wood cum 130183.05
  9.1.2 Sal wood cum 105327.20
  9.1.3 Kiln seasoned and chemically treated hollock wood cum 71746.40
9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15:
2001 (Part B) in factory made frames of doors, windows, clerestory
windows and other frames, wrought framed and fixing in position with
hold fast lugs or with dash fasteners of required dia & length (hold fast
lugs or dash fastener shall be paid for separately).		 cum 113706.40
  9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and
fixed in position with necessary stainless steel screws etc.		    
  9.3.1 Sal wood cum 95893.90
  9.3.2 Kiln seasoned and chemically treated hollock wood cum 62114.45
9.4 Extra for additional labour for circular works, such as in frames of fan
light		    
  9.4.1 Second class teak wood cum 13018.35
  9.4.2 Sal wood cum 10532.80
  9.4.3 Kiln seasoned and chemically treated hollock wood cum 7175.00
9.5 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately)		    
9.5.1 Second class teak wood    
  9.5.1.1 35 mm thick shutters sqm 3613.35
  9.5.1.2 30 mm thick shutters sqm 3269.85 sqm 3269.85
9.5.2 Kiln seasoned and chemically treated hollock wood    
  9.5.2.1 35 mm thick shutters sqm 2381.55
  9.5.2.2 30 mm thick shutters sqm 2208.65
9.5.3 Kiln seasoned selected planks of sheesham wood    
  9.5.3.1 35 mm thick shutters sqm 3191.60
  9.5.3.2 30 mm thick shutters sqm 2906.00
9.6 Providing and fixing 35 mm thick factory made laminated veneer lumber
door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing
with butt hinges of required size with necessary screws, all complete
as per directions of Engineer- in-charge and panelling with panels of :
(Note:- Butt hinges and necessary screws shall be paid separately)		    
  9.6.1 12 mm thick plain grade -1, medium density flat pressed three
layer particle board FPT - I or graded wood particle board
FPT- I, IS : 3087 marked, bonded with BWP type synthetic
resin adhesive as per IS : 848 :		 sqm 2636.60
  9.6.2 12 mm thick pre-laminated particle board (decorative lamination
on both sides) grade -1, medium density flat pressed, three
layer particle board FPT- I or graded wood particle board FPT- I,
conforming to IS : 3087, bonded with BWP type synthetic resin
adhesive as per IS : 848 and pre- laminated conforming to IS :
12823, Grade 1, Type - II marked :		 sqm 2770.40
  9.6.3 12 mm thick one side Pre-laminated particle board (decorative
lamination on one side and other sides balancing lamination)
grade -1, medium density flat pressed, three layer particle
board FPT - I or graded wood particle board FPT-1 conforming
to IS : 3087 bonded with BWP type synthetic resin adhesive
as per IS : 848 and pre-laminated conforming to IS : 12823,
Grade -1, Type II marked :		 sqm 3024.60
9.7 Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows
(Area of opening for panel inserts excluding portion inside grooves or
rebates to be measured). Panelling for panelled or panelled and glazed
shutters 25 mm to 40 mm thick :		    
  9.7.1 Second class teak wood sqm 2942.30
  9.7.2 Kiln seasoned and chemically treated hollock wood sqm 1949.65
  9.7.3 Ply wood 5 ply, 9 mm thick
  9.7.3.1 Decorative plywood both side decorative veneer
(Type - I) conforming to IS 1328 BWR type		 sqm 2256.55
  9.7.3.2 Decorative plywood one side decorative veneer
and commercial veneer on other face (Type 1)
conforming to IS 1328 BWR Type		 sqm 2288.95
9.7.4 Ply wood 7 ply, 9 mm thick    
  9.7.4.1 Decorative plywood one side decorative veneer
and commercial veneer on other face (Type 1)
conforming to IS 1328 BWR Type		 sqm 2418.70
9.7.5 Particle Board 12 mm thick    
  9.7.5.1 Plain particle board flat pressed, 3 layer or graded
wood particle board medium density Grade I, IS :
3087 marked		 sqm 1345.10
  9.7.5.2 Veneered flat pressed three layer or graded wood
particle board with commercial veneering on both
sides conforming to IS:3097, grade I		 sqm 1688.90
  9.7.5.3 Pre-laminated particle board with decorative
lamination on one side and balancing lamination
on other side, Grade I, Type II IS: 12823 marked		 sqm 1753.80
  9.7.5.4 Pre-laminated particle board with decorative
lamination on both sides, Grade I, Type II, IS:12823
marked		 sqm 1810.55
9.7.6 Coir Veneer Board (conforming to IS 14842)    
  9.7.6.1 12 mm thick sqm 1964.60    
9.7.7 Float glass panes    
  9.7.7.1 4 mm thick glass pane (weight not less than
10 kg per sqm)		 sqm 1792.55
  9.7.7.2 5.0 mm thick glass panes (weight not less than
12.5 kg per sqm)		 sqm 2116.90
9.7.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm
dia. wire and 1.4mm wide aperture with matching wood
beading		 sqm 1458.60
9.9 Providing and fixing glazed shutters for doors, windows and clerestory
windows using 4 mm thick float glass panes, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary
screws.		    
  9.9.1 Second class teak wood    
  9.9.1.1 35 mm thick sqm 4353.75
  9.9.1.2 30 mm thick sqm 3961.20
9.9.2 Kiln seasoned and chemically treated hollock wood    
  9.9.2.1 35 mm thick sqm 2951.35
  9.9.2.2 30 mm thick sqm 2753.80
9.9.3 Kiln seasoned selected planks of sheesham wood    
  9.9.3.1 35 mm thick sqm 3874.15
  9.9.3.2 30 mm thick sqm 3547.75
9.10 Providing and fixing factory made laminated veneer lumber glazed shutter
conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick
float glass panes for doors, windows and clerestory windows fixing
with butt hinges of required size with necessary screws, all as per
directions of Engineer-in-charge. (Note:- Butt hinges and necessary
screws shall be paid separately)		    
9.10.1 30 mm thick shutters sqm 2572.50
9.11 Extra for providing heavy sheet float glass panes instead of ordinary
float glass in glazed doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion inside rebate shall
be measured)		    
  9.11.1 5.0 mm thick instead of 4 mm thick. sqm 267.60
9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary
float glass panes 4 mm thick in doors, windows and clerestory window
shutters. (Area of opening for glass panes excluding portion inside rebate
shall be measured).		 sqm 214.05
9.13 Deduct for providing pin headed glass panes instead of ordinary float
glass panes weighing 4 mm thick in doors, windows and clerestory
windows shutters (Area of opening for glass panes excluding portion
inside rebate shall be measured).		 sqm 6.70
9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of
M.S. pressed butt hinges bright finished of required size with necessary
screws. (Shutter area to be measured).		 sqm 126.50
9.15 Deduct for not providing hinges in doors, windows or clerestory window
shutters with		    
9.15.1 Stainless steel butt hinges with stainless steel screws :    
  9.15.1.1 For 2nd class teak wood and other class of
wood shutters		 sqm 181.60
  9.15.2 ISI marked M.S. pressed butt hinges bright finished of
required size.		    
  9.15.2.1 For 2nd class teak wood and other class of wood
shutters		 sqm 55.15
9.16 Providing and fixing 25 mm thick shutters for cup board etc. :    
9.16.1 Panelled or panelled & glazed shutters :    
  9.16.1.1 Second class teak wood including ISI marked
anodised aluminium butt hinges with necessary
screws		 sqm 3794.85
  9.16.1.2 Second class teak wood including iSi marked
nickel plated bright finished M.S. piano hinges
with necessary screws		 sqm 3937.20
9.16.2 Glazed shutters :    
  9.16.2.1 Second class teak wood including ISI marked
anodized aluminium butt hinges with necessary
screws		 sqm 3646.15
  9.16.2.2 Second class teak wood including ISI marked
nickel plated bright finished M.S. piano hinges
with necessary screws		 sqm  3684.65
9.17 Providing and fixing flat pressed 3 layer particle board medium density
exterior grade (Grade I) or graded wood particle board IS : 3087 marked,
to frame, backing or studding with screws etc. complete (Frames,
backing or studding to be paid separately):		    
  9.17.1 12 mm thick sqm 643.50
  9.17.2 18 mm thick sqm 915.60
9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one
side decorative and other side balancing lamination Grade I, Type II
exterior grade IS : 12823 marked, in shelves with screws and fittings
wherever required, edges to be painted with polyurethane primer (fittings
to be paid separately).		    
  9.18.1 18 mm thick sqm 1193.20
  9.18.2 25 mm thick sqm 1548.45
9.20 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.		    
  9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws		 sqm 3023.95
  9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws		 sqm 2756.35
  9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated
bright finished M.S. Piano hinges IS : 3818 marked with
necessary screws		 sqm 2464.70
9.21 Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:		    
  9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws		 sqm 1886.70
  9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws		 sqm 1819.80
  9.21.3 25 mm thick (for cupboard) including ISI marked nickel plated
bright finished M.S. piano hinges with necessary screws		 sqm 1782.35
9.22 Extra for Providing and fixing flush doors with decorative veneering instead
of non decorative ISI marked flush door shutters conforming to IS: 2202
(Part I)		    
  9.22.1 On one side only sqm 441.50
  9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured).		 sqm 401.40
9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush
doors (cost of glass excluded) (overall area of door shutter to be
measured):		    
  9.24.1 Rectangular or square sqm 173.95
  9.24.2 Circular sqm 180.60
9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters
(overall area of door shutters to be measured).		    
9.25.1 Decorative type door sqm 354.55
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to
be measured).		 sqm 93.65
9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire
gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with hinges
and necessary screws :		    
9.27.1 35 mm thick shutters    
  9.27.1.1 with ISI marked M.S. pressed butt hinges bright
finished of required size		    
  9.27.1.1.1 Second class teak wood sqm 4221.20
  9.27.1.1.2 Kiln seasoned and chemically treated
hollock wood		 sqm 2979.50
  9.27.1.1.3 Kiln seasoned selected class of
sheesham wood		 sqm 3796.15
  9.27.1.2 With ISI marked stainless steel butt hinges of
required size		    
  9.27.1.2.1 Second class teak wood sqm 4347.70
  9.27.1.2.2 Kiln seasoned and chemically
treated hollock wood		 sqm 3106.00
  9.27.1.2.3 Kiln seasoned selected class of
sheesham wood		 sqm 3922.65
9.27.2 30 mm thick shutters    
9.27.2.1 with ISI marked M.S. pressed butt hinges bright
finished of required size		    
  9.27.2.1.1 Second class teak wood sqm 3750.75
  9.27.2.1.2 Kiln seasoned and chemically
treated hollock wood		 sqm 2689.60
  9.27.2.1.3 Kiln seasoned selected class of
sheesham wood		 sqm 3386.90
9.27.2.2 With ISI marked stainless steel butt hinges of
required size		    
  9.27.2.2.1 Second class teak wood sqm 3877.25
  9.27.2.2.2 Kiln seasoned and chemically
treated hollock wood		 sqm 2815.90
  9.27.2.2.3 Kiln seasoned selected class of
sheesham wood		 sqm 3513.40
9.31 Providing and fixing wire gauge laminated veneer lumber shutters
conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using
galvanised wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia 0.63 mm as per IS :1568, for doors, windows
and clerestory windows fixing with butt hinges of required size with
necessary screws, as per directions of Engineer-in-charge: (Note:- Butt
hinges and necessary screws shall be paid separately)		    
  9.31.1 35 mm thick shutters sqm 2636.60
  9.31.2 30 mm thick shutters sqm 2382.40
MISCELLANEOUS-WOOD WORK
9.32 Item Shifted to Sub Head 8 as item 8.23    
9.33 Item Shifted to Sub Head 8 as item 8.24    
9.34 Item Shifted to Sub Head 8 as item 8.25    
9.35 Item Shifted to Sub Head 8 as item 8.26    
9.36 Item Shifted to Sub Head 8 as item 8.27    
9.37 Item Shifted to Sub Head 8 as item 8.28    
9.38 Item Shifted to Sub Head 8 as item 8.29    
9.39 Item Shifted to Sub Head 8 as item 8.30    
9.40 Providing and fixing wooden moulded beading to door and window frames
with iron screws, plugs and priming coat on unexposed surface etc.
complete :		    
9.40.1 2nd class teak wood    
  9.40.1.1 50x12 mm metre 184.60
  9.40.1.2 50 x 20 mm metre 232.15
9.40.2 Kiln seasoned and chemically treated hollock wood    
  9.40.2.1 50x12 mm  metre 149.20
  9.40.2.2 50x20 mm metre 173.15
9.41 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart
(frames to be paid separately), including fixing 50x12 mm beading
complete with :		    
  9.41.1 Second class teak wood sqm 2546.90
9.42 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3
layer or graded wood particle board medium density grade I, IS : 3087
marked, including top cover of 6 mm commercial ply wood conforming
to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type)
curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size
100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs
75 mm long etc. all complete.		 metre 505.95
9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer
board ISI marked IS : 14842, including top cover of 6 mm coir veneer
board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with
nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm
long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm
x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all
complete.		 metre 632.65
9.44 Extra for using veneered particle board conforming to IS 3097 Grade I, in
item of pelmet 18mm thick 150mm wide.		    
  9.44.1 Non decorative veneer on both sides metre 33.20
  9.44.2 Particle board with decorative veneering on both sides metre 107.05
9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. metre 60.10
9.46 Providing and fixing chromium plated brass curtain rod having wall
thickness of 1.25mm with two chromium plated brass brackets fixed
with C.P. brass screws and PVC sleeves etc., wherever necessary
complete :		    
  9.46.1 12 mm dia metre 272.80
  9.46.2 20 mm dia metre 373.15
  9.46.3 25 mm dia metre 480.15
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel
plated brackets :		    
  9.47.1 20 mm dia (heavy type) metre  155.65
  9.47.2 25 mm dia (heavy type) metre 162.35
9.48 Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat
with approved steel primer all complete.		    
  9.48.1 Fixed to steel windows by welding kg 165.30
  9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 183.50
9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide
and 1.6mm thick for windows etc. including 62 x19 mm beading of II nd
class teak wood and priming coat with approved steel primer all
complete.		 sqm 1240.55
9.50 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of
weight not less than 7.75 Kg per sqm to window frames etc. including
62x19 mm beading of second class teak wood and priming coat with
approved steel primer all complete.		 sqm 1448.35
9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows
and clerestory windows using wire gauge with average width of aperture
1.4 mm in both directions with wire of dia 0.63 mm all complete.		    
  9.51.1 With 2nd class teak wood beading 62X19 mm sqm 1133.35
  9.51.2 With 12 mm mild steel U beading sqm 781.25
9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not
less than 7.75 Kg per sqm in panelled and glazed door and window
shutter instead of glass sheet 4 mm thick.		 sqm 173.95
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and embedding
in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 20mm nominal size).		 each 179.20
9.54 Providing beams including hoisting, fixing in position and applying wood
preservative for the unexposed surfaces, etc. complete with :		    
  9.54.1 Sal wood cum 93844.4
  9.54.2 Hollock wood cum 59720.35
BRIGHT FINISHED M.S. FITTINGS
9.55 Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. complete :		    
  9.55.1 125x65x2.12 mm each 46.25
  9.55.2 100x58x1.90 mm each 37.30
  9.55.3 75x47x1.70 mm  each 31.05
  9.55.4 50x37x1.50 mm each 15.65
9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges
with necessary screws etc. complete :		    
  9.56.1 125x90x4.00 mm each 56.30
  9.56.2 100x75x3.50 mm each 48.00
  9.56.3 75x60x3.10 mm each 36.25
  9.56.4 50x40x2.50 mm each 19.80
  Note: - In coastal areas, M.S. heavy weight butt hinges or stainless
steel hinges shall be used.		    
COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED ASPER IS: 1378)
9.57 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws etc. complete.		    
  9.57.1 125x65x2.12 mm each 45.95
  9.57.2 100x58x1.90 mm each 38.20
  9.57.3 75x47x1.70 mm each 32.30
  9.57.4 50x37x1.50 mm each 16.30
9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary
hinges with necessary screws etc. complete :		    
  9.58.1 150x125x27x2.80 mm each 75.20
  9.58.2 125x125x27x2.80 mm each 71.90
  9.58.3 100x125x27x2.80 mm each 61.45
  9.58.4 75x100x20x2.24 mm each 54.05
9.59 Providing and fixing ISI marked oxidised M.S. single acting spring hinges
with necessary screws etc. complete :
9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel
plating and fixing with necessary screws etc., complete.		    
  9.59.1 150 mm each 244.75
  9.59.2 125 mm each 218.00
  9.59.3 100 mm each 189.75
9.60 Providing and fixing oxidised M.S. double acting spring hinges with
necessary screws etc. complete.		    
  9.60.1 150 mm each 270.20
  9.60.2 125 mm each 235.65
  9.60.3 100 mm each 216.50
9.61.1 Overall width 35 mm metre 270.95
  9.61.2 Overall width 50 mm metre 265.60    
  9.61.3 Overall width 65 mm metre 281.65    
9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with
nuts and screws etc. complete :		    
  9.62.1 300x16 mm each 183.30
  9.62.2 250x16 mm each 170.00
9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
(Barrel type) with necessary screws etc. complete :		    
  9.63.1 250x10 mm each 74.15
  9.63.2 200x10 mm each 60.55
  9.63.3 150x10 mm each 52.55
  9.63.4 100x10 mm each 38.70
9.64 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock
conforming to IS : 7534 with necessary screws bolts, nut and washers
etc. complete.		 each  104.70
9.65 Providing and fixing ISi marked oxidised M.S. door latches conforming
to IS:5930 with screws etc. complete :
9.65.1 300x20x6 mm		 each 81.75
  9.65.2 250x20x6 mm each 68.40
9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete :		    
  9.66.1 125 mm each 34.85
  9.66.2 100 mm each 27.95
  9.66.3 75 mm each 23.90
9.67 Providing and fixing oxidised M.S. hasp and staple (safety type)
conforming to IS : 363 with necessary screws etc. complete :		    
  9.67.1 150 mm each  28.75
  9.67.2 115 mm each 25.60
  9.67.3 90 mm each 21.70
9.68 Providing and fixing oxidised M.S. casement stays (straight peg type)
with necessary screws etc. complete.		    
  9.68.1 300 mm weighing not less than 200 gms each 58.80
  9.68.2 250 mm weighing not less than 150 gms each 51.40
  9.68.3 200 mm weighing not less than 120 gms each 44.70
9.69 Providing and fixing oxidised M.S. Safety chain with necessary fixtures
for doors, (weighting not less than 450 gms)		 each 88.50
STAINLESS STEEL FITTINGS
9.70 Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete :		    
  9.70.1 125x64x1.90 mm each 84.50
  9.70.2 100X58X1.90 mm each 74.60
  9.70.3 75x47x1.80 mm each 56.60
  9.70.4 50x37x1.50 mm each 32.25
9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :		    
  9.71.1 125x64x2.50 mm each 95.90
  9.71.2 100x60x2.50 mm each 77.30
  9.71.3 75x50x2.50 mm each 62.60
BRASS FITTINGS
9.72 Providing and fixing bright finished brass butt hinges with necessary
screws etc. complete :		    
  9.72.1 125x85x5.5 mm (heavy type) each 226.85
  9.72.2 125x70x4 mm (ordinary type) each 155.40
  9.72.3 100x85x5.5 mm (heavy type)  each 173.60
  9.72.4 100x70x4 mm (ordinary type) each 123.85
  9.72.5 75x65x4 mm (heavy type) each 145.40
  9.72.6 75x40x2.5 mm (ordinary type) each 4.10
  9.72.7 50x40x2.5 mm (ordinary type) each 34.20
9.73 Providing and fixing bright finished brass parliamentary hinges with
necessary screws etc. complete :		    
  9.73.1 150x125x27x5 mm each  392.40
  9.73.2 125x125x27x5 mm each 350.95
  9.73.3 100x125x27x5 mm each 322.85
  9.73.4 75x100x20x3.2 mm each 286.45
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :		    
  9.74.1 250x10 mm each 373.65
  9.74.2 200x10 mm each 299.85
  9.74.3 150x10 mm each 231.65
  9.74.4 100x10 mm each 159.65
9.75 Providing and fixing bright finished brass door latch with necessary screws
etc. complete :		    
  9.75.1 300x16x5 mm each 272.40
  9.75.2 250x16x5 mm each 259.00
9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.		 each 712.75
9.77 Providing and fixing bright finished brass 100 mm mortice latch with one
dead bolt and a pair of lever handles of approved quality with necessary
screws etc. complete.		 each 592.35
9.78 Providing and fixing bright finished brass night latch of approved quality
including necessary screws etc. complete.		 each 993.75
9.79 Providing and fixing special quality bright finished brass cupboard or
ward robe locks with four levers of approved quality including necessary
screws etc. complete.		    
  9.79.1 40 mm  each 251.2
  9.79.2 50 mm each 291.30    
  9.79.3 65 mm each 298.00    
  9.79.4 75 mm each 318.10    
9.80 Providing and fixing 50 mm bright finished brass cup board or wardrobe
knob of approved quality with necessary screws.		 each 62.7062.70
9.81 Providing and fixing bright finished brass handles with screws etc.
complete:		    
  9.81.1 125 mm each 204.65
  9.81.2 100 mm each 189.45
  9.81.3 75 mm  each 149.35
9.82  Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.		 each 106.70
9.83 Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm), with
necessary accessories and screws etc. complete.		 each 1003.50
CHROMIUM PLATED BRASS FITTINGS
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and
lock with 6 levers and a pair of lever handles of approved quality with
necessary screws etc. complete.		 each 806.45
9.89 Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete.		 each 846.55
9.90 Providing and fixing special quality chromium plated brass cupboard
locks with six levers of approved quality including necessary screws
etc. complete.		    
  9.90.1 Size 40 mm each 257.85
  9.90.2 Size 50 mm each 271.25
  9.90.3 Size 65 mm each 304.70
  9.90.4 Size 75 mm each 338.15
9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe
knobs with nuts complete.		 each 121.60
9.92 Providing and fixing chromium plated brass handles with necessary
screws etc. complete:		    
  9.92.1 125 mm each 226.10
  9.92.2 100 mm each 198.85
  9.92.3 75 mm each 178.75
9.93 Providing and fixing chromium plated brass casement window fastener
with necessary screws etc. complete.		 each 140.15
9.94 Providing and fixing chromium plated brass casement stays (straight
peg type) with necessary screws etc. complete :		    
  9.94.1 300 mm weighing not less than 330 gms each 207.05
  9.94.2 250 mm weighing not less than 280 gms each 180.30
  9.94.3 200 mm weighing not less than 240 gms each 153.55
ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI
MARKED)
9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete:		    
  9.95.1 125x75x4 mm each 136.60
  9.95.2 125x63x4 mm each 114.25
  9.95.3 100x75x4 mm each 104.90
  9.95.4 100x63x4 mm each 95.65
  9.95.5 100x63x3.2 mm each 88.45
  9.95.6 75x63x4 mm each 77.10
  9.95.7 75x63x3.2 mm each 70.55
  9.95.8 75x45x3.2 mm each 66.50
  Note :- Aluminum hinges shall not be used in wooden shutters, stainless
steel hinges shall be preferred.		    
9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or shade, with nuts and screws
etc. complete :		    
  9.96.1 300x16 mm each 257.15    
  9.96.2 250x16 mm each 231.70    
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade, with necessary screws etc. complete :		    
  9.97.1 300x10 mm each 116.80
  9.97.2 250x10 mm each 103.55
  9.97.3 200x10 mm each 90.00
  9.97.5 100x10 mm each 58.15
9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour and shade, with necessary screws bolts, nut and
washers etc. complete.		 each 85.95
9.99 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15
mm, anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade, with necessary
screws etc. complete.		 each 211.75
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade, with necessary screws etc. complete :		    
  9.100.1 125 mm each 59.65
  9.100.2 100 mm each 52.85
  9.100.3 75 mm each 45.90
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and shade, with necessary screws
etc. complete.		    
  9.101.1 Single rubber stopper each  33.95
  9.101.2 Twin rubber stopper each 62.05
9.102 Providing and fixing aluminium casement stays, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed to required colour and shade, with necessary screws etc.
complete.		 each 62.55
9.103 Providing and fixing bright finished brass 100 mm mortice latch and
lock, ISI marked, with six levers and a pair of anodised (anodic coating
not less than grade AC 10 as per IS : 1868) aluminium lever handles of
approved quality with necessary screws etc. complete.		 each 748.65
9.104 Providing and fixing aluminium tee channels (heavy duty) with rollers &
stop end in pelmets as curtain rod.		 metre  139.35
GYPSUM BOARD PARTITIONS
9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame and
required board, including providing and fixing of frame work made of special
section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/
sqm(both side inclusive), consisting of floor and ceiling channel 50mm
wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor
and ceiling at the spacing of 610 mm centre to centre with dash fastener of
12.5 mm dia meter 50 mm length or suitable anchor fastener or metal
screws with nylon plugs and the studs 48 mm wide having one flange of 34
mm and other flange 36 mm and 0.50 mm thick fixed vertically within
flanges of floor and ceiling channel and placed at a spacing of 610 mm
centre to centre by 6 mm dia bolts and nuts, including fixing of studs along
both ends of partition fixed flush to wall with suitable anchor fastener or
metal screws with nylon plugs at spacing of 450 mm centre to centre, and
fixing of boards to both side of frame work by 25 mm long dry wall screws
on studs, floor and ceiling channels at the spacing of 300 mm centre to
centre. The boards are to be fixed to the frame work with joints staggered
to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width
(0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120
gms/sqm(both side inclusive)) to be provided at the horizontal joints of twoboards, fixed to the studs using metal to metal flat head screws, including
jointing and finishing to a flush finish with recommended jointing compound,
jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint
finisher and two coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete.		    
  9.105.1 75 mm overall thickness partition with 12.5 mm thick double
skin fire rated Glass Reinforced Gypsum (GRG) board
conforming to IS: 2095: (part 3) : 1996 (Board with BIS
certification marks)		 sqm 1741.15
  9.105.2 75mm overall thickness partition with 12.5 mm thick double
skin tapered edged plain Gypsum board conforming to IS:
2095: (part 1) : 1996 (Board with BIS certification marks)		 sqm 1513.70
  9.105.3 66mm overall thickness Partition with 8mm thick double skin
Calcium Silicate Board made with Calcareous & Siliceous
materials reinforced with cellulose fiber manufactured through
autoclaving process with Compressive Strength 225 kg/sq.cm,
Bending Strength 100 kg./ sq.cm		 sqm 1808.05
  9.105.4 66mm overall thickness partition using 8mm thick double skin
multipurpose cement board reinforced with cellulose fibre
manufactured through autoclaving process (High pressure
steam cured) as per IS : 14862 with suitable fibre cement
screws		 sqm 1687.60
  9.105.5 66 mm overall thickness partition using 8 mm thick double
skin multipurpose cement bonded wood particle board
manufactured as per IS: 14276 with suitable cement bonded
board screws		 sqm 1674.25
9.106 Providing and fixing PTMT handles with necessary screws etc. complete.    
  9.106.1 125x34x24 mm weighing not less than 23 gms each 40.20
  9.106.2 150x34x24 mm weighing not less than 26 gms each 40.20
9.107 Providing and fixing PTMT Butt hinges with necessary screws etc.
complete.		    
  9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod
weighing not less than 34 gms		 each 67.70
  9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod
weighing not less than 53 gms		 each 84.10
9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside
and necessary screws etc., complete.		    
  9.108.1 152x42x18 mm weighing not less than 60 gms each 75.85
  9.108.2 202x42x18 mm weighing not less than 78 gms each 104.25
9.109 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42
mm with suitable washers weighing not less than 33 gms		 each  36.75
9.110 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality
25mm dia (Average) half cut bamboo placed vertically and fixed together
with three numbers horizontal running members of hollock wood in
scantling of section 50X25 mm, fixed with nails and G.I wire on existing
support complete as per direction of Engineer-in-charge.		 sqm 576.15
9.111 Providing and fixing wooden moulded corner beading of triangular shape
to the junction of panelling etc. with iron screws, plugs and priming coat
on unexposed surface etc. complete 2nd class teak wood.		    
  9.111.1 50x50 mm (base and height) metre 250.25
9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj
beading of size 18X5 mm fixed with wooden adhesive of approved quality
and screws/nails on the edges of the Pre-laminated particle board as
per direction of Engineer-in-charge.		 metre 78.85
9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers
without pair of handles of approved quality for aluminium door, with
necessary screws etc complete as per direction of Engineer- in-charge.		 each 637.05
9.114 Providing and fixing magnetic catcher of approved quality in cupboard /
ward robe shutters, including fixing with necessary screws etc. complete.		    
  9.114.1 Triple strip vertical type each 39.05
  9.114.2 Double strip (horizontal type) each 31.05
9.115 Providing and fixing powder coated telescopic drawer channels 300 mm
long with necessary screws etc. complete as per directions of Engineerin-
charge. one set 339.75		    
9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets
shutter by with stainless steel rollers to run inside C or E aluminium
channel section (The payment of C or E channel shall be made separately)		 each 14.80
9.117 Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,
joints mitred and Plastic welded. The hinge side vertical of the frames
reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1
mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufacturer’s specification and direction of Engineerin-
charge		    
  9.117.1 Extruded section profile size 48x40 mm metre 221.65
  9.117.2 Extruded section profile size 42x50 mm metre 267.45
9.118 Providing and fixing to existing door frames.    
  9.118.1 24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.
The styles and rails mitred and joint at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of
size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The
lock rail made up of 'H' section, a uPVC hollow section of size
100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the
shutter styles by means of plastic/galvanised M.S. 'U' cleats.
The shutter frame filled with a uPVC multi-chambered singleof 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting horizontally
6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and
direction of Engineer-in-charge. (For W.C. and bathroom door
shutter).		 sqm 1760.70
  9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow section of
size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with
inbuilt decorative moulding edging on one side. The styles
and rails mitred and joint at the corners by means of M.S.
galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws. The styles of
the shutter reinforced by inserting galvanised M.S. tube of
size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The
lock rail made up of 'H' section, a uPVC hollow section of size
100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the
shutter styles by means of plastic/ galvanised M.S. 'U' cleats.
The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness
of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels
filled vertically and tie bar at two places by inserting horizontally
6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and
direction of Engineer-in-charge.		 sqm 1978.65
  9.118.3 25 mm thick PVC flush door shutters made out of a one piece
Multi chamber extruded PVC section of the size of 762 mm X
25 mm or less as per requirement with an average wall
thickness of 1 mm (± 0.3 mm). PVC foam end cap of size
23x10 mm are provided on both vertical edges to ensure the
overall thickness of 25 mm. M.S. tube having dimensions 19
mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the
hinge side of the door. Core of the door shutter should be filled
with High Density Polyurethane foam. The Top & Bottom edges
of the shutter are covered with an end-cap of the size 25 mm
X 11 mm. Door shutter shall be reinforced with special
polymeric reinforcements as per manufacturer’s specification
and direction of Engineer-in-charge to take up necessary
hardware and fixtures. Stickers indicating the locations of
hardware will be pasted at appropriate places		 sqm 2582.30
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm
with awall thickness of 5 mm, made out of extruded 5mm rigid PVC
foam sheet, mitred at corners and joined with 2 Nos of 150 mm long
brackets of 15x15 mm M.S. square tube, the vertical door frame profiles
to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM
rubber gasket weather seal to be provided through out the frame. The
door frame to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as per manufacturer’s specification and direction of Engineerin-
Charge.		 metre 391.65
9.120 Providing and fixing factory made panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm
x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture.
M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of
size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and
20 mm shall be tapered in 45 degree angle on both side forming styles
and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat
and 20 mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be
flat and 20 mm shall be tapered on both sides to form lock rail. Top,
bottom and lock rails shall be provided both side of the panel. 10 mm (5
mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert
for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to
be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm
(5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and
joined together with solvent cement adhesive. An additional 5 mm thick
PVC strip of 20 mm width is to be stuck on the interior side of the 'C'
Channel using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer's specification & drawing.		    
  9.120.1 30 mm thick plain PVC door shutters  sqm 2423.40
  9.120.2 30 mm thick pre laminated PVC door shutters sqm 2423.40
9.121 1Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15
mm to receive shutter of 30 mm thickness. The laminate shall be moulded
with fire resistant grade unsaturated polyester resin and chopped mat.
Door frame laminate shall be 2mm thick and shall be filled with suitable
wooden block in all the three legs. The frame shall be covered with fiber
glass from all sides. M.S. stay shall be provided at the bottom to steady
the frame.		 metre 679.85
9.122 Providing and fixing to existing door frames.    
  9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and
manufacture, made with fire - retardant grade unsaturated
polyester resin, moulded to 3 mm thick FRP laminate for
forming hollow rails and styles, with wooden frame and suitable
blocks of seasoned wood inside at required places for fixing
of fittings, cast monolithically with 5 mm thick FRP laminate
for panels conforming to IS: 14856, including fixing to frames.		 sqm  3465.05
  9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door
shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3
mm thick FRP laminate all around, with suitable wooden
blocks inside at required places for fixing of fittings and
polyurethane foam (PUF)/Polystyrene foam to be used as
filler material throughout the hollow panel, casted
monolithically with testing parameters of F.R.P. laminate
conforming to table - 3 of IS: 14856, complete as per direction
of Engineer-in-charge.		 sqm 3931.95
9.123 Providing and fixing factory made door frame (single rebate) made out of
single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred & Jointed with self driven self
tapping screws of size 38 mm x 4 mm & PVC solvent cement, including
fixing the frame to wall with suitable dia & length anchor fastener as per
manufacturer's specification and direction of Engineer-in-charge.		 metre 476.50
9.124 Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power. The styles and rails
shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm,
painted with primer , all four corners of reinforcement to be welded or
sealed. Solid PVC extruded bidding (push fit type) will be set inside the
styles and the rails with a cavity, to receive single piece extruded 5mm
PVC sheet as panel. The styles and rails will be mitred cut and joint
with the help of PVC solvent cement & self driven self tapping screws.
Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with
wall thickness 5 mm & 15 mm integrally extruded in the middle of the
lock rail & fixed with styles with the help of PVC solvent cement & self
driven self tapping screws of size 100mm x 8 mm complete as per
manufacturer's specifications and direction of Engineer-in-charge.		    
  9.124.1 Non decorative finish sqm 3028.85
  9.124.2 Decorative finish (both side wood grained finish) sqm 3162.65
9.125 Providing and fixing PVC rigid foam sheet 1 mm thick on existing door
shutters (bathroom and W.C. doors) using synthetic rubber based
adhesive.		 sqm 1200.35
9.126 Providing and fixing 12 mm thick panelling or panelling and glazing in
panelled or panelled and glazed shutters for doors, windows and
clerestory windows (area of opening for panel inserts excluding portion
inside grooves or rebates to be measured). Panelling for panelled or
panelled and glazed shutters 25 mm to 40 mm thick.		    
  9.126.1 Marine plywood conforming to IS: 710 sqm 2005.15
  9.126.2 Fire retardant plywood conforming to IS: 5509 sqm 2256.55
9.127 Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt/ suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.		    
  9.127.1 1.5 mm thick sqm 842.75
  9.127.2 1.0 mm thick sqm 717.65
9.128 Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.)
chajja 4 mm thick of required colour, size and design made by Resin
Transfer Moulding (RTM) Machine Technology, resulting in void free
compact laminate in single piece, having smooth gradual slope curvature
for easy drainage of water and duly reinforced by 2 nos vertically and 1nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for
grouting on the existing wall along with the 50 mm flanges duly inserted
and sealed in the wall complete in one single piece casted monolithically,
including all necessary fittings . The FRP Chajja should be manufactured
using unsaturated Polyester resin as per IS: 6746, duly reinforced with
fibre glass chopped strand mat (CSM) as per IS: 11551 complete with
protective Gel coat U/V coating on Top for complete resistance from the
extreme of temperature, weather & sunlight. Note - Only plan area of
chajjas shall be measured for making payment]		 sqm 4851.25
9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated
flat pressed three layer particle board or graded wood particle board IS:
12823 marked, exterior grade (Grade l Type ll), having one side decorative
lamination and other side balancing lamination, including IInd class teak
wood lipping of 25 mm wide x12 mm thick with necessary screws and
bright finished stainless steel piano hinges, complete as per direction
of the Engineer-in-Charge		 sqm 1928.90
9.130 Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make,
including IInd class teak wood lipping of 25 mm wide x 12 mm thick
with necessary screws and bright finished stainless steel piano hinges,
complete as per direction of Engineer-in-Charge.		    
  9.130.1 With decorative veneering on one side and commercial
veneering on other side		 sqm  1647.95
  9.130.2 With non decorative veneering on both sides sqm 1547.60
9.131 Providing and fixing factory made shutters of Pre-laminated particle board
flat pressed three layer or graded wood particle board with one side
decorative finish and other side balancing lamination conforming to IS:
12823 Grade l Type ll, of approved design, and edges sealed with water
resistant paint and lipped with aluminium 'U' type edge beading allround
the shutter, including fixing with angle cleat, grip strip, cadmium
plated steel screws, including fixing of aluminium hinges 100x63x4 mm
etc. complete as per architectural drawing and direction of Engineer-in-
Charge (Cost of 'U' beading and hinges will be paid for separately).		    
  9.131.1 25 mm thick sqm 1531.45
9.132 Providing and fixing aluminum U beading of required size to Pre-laminated/
flush door shutter, including fixing etc. complete as per direction of
Engineer-in-charge.		 kg 517.80
9.133 Providing and fixing, in position concealed G.I. section for wall paneling
using board of required thickness fixed on the 'W' profile (0.55 mm
thick) having a knurled web of 51.55 mm and two flanges of 26 mm
each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel
having one flange of 20 mm and another flange of 30 mm with thickness
of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully
threaded self-tapping dry wall screws. Board is fixed to the 'W' profile
with 25 mm countersunk ribbed head screws @ 200 mm C/C., all
complete as per the drawing & directions of engineer-in-charge, the
joints of the boards are finished with specially formulated jointing
compound and 48mm wide jointing tape to provide seamless finish.		    
9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm
having built in rebate made out of 16 SWG G.I. sheet (zinc coating not
less than 120 gm/sqm) duly filled with vermuculite based concrete mix,
suitable for mounting 60 minutes fire rated door shutters. The frame is
fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround
the frame and fixing with dash fastener of approved size and make,
including applying a coat of approved brand fire resistant primer etc.
complete as per direction of Engineer-in-charge (Dash fastener to be
paid for separately).		 metre 1444.30
9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of
60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified
as per laboratory approved by Engineer-in-charge, with suitable mounting
on door frame, consisting of vertical styles, lock rail, top rail 100 mm
wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc
coating not less than 120 gm/m2) duly filled FR insulation material and
fixing with necessary stainless steel ball bearing hinges of approved
make, including applying a coat of approved fire resistant primer etc. all
complete as per direction of Engineer-in-charge (panneling to be paid
for separately).		 sqm 6166.00
9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I.
sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm
screwed with M4 x 38 mm SS screws at distance 75 mm from the
edges and 150 mm c/c , including applying a coat of approved
fire resistant primer/powder coating of not less than 30 micron
on G.I. beading, & special ceramic tape of 5 x 20 mm size etc
complete in all respect as per NBC 2016, IS 16231 (Part 3):2016
and as per direction of Engineer-in-charge with glass of required
thickness having 60 minutes of fire resistance both integrity &
radiation control (EW60) and minimum 20 minutes of insulation
(EI20). The manufacturer have to give test report/certification of fire
glass and the glass should have the stamp showing the value of E,
EW & EI. The glass shall be tested in approved NABL accredited labor by any other accreditation body which operates in accordance
with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for
testing and calibration scopes shall be eligible. The maximum
glazing size shall not be more than 1100x2200 mm (w x h) or 2.42
sqm.		 sqm 36050.45
9.139 Providing and fixing panic bar / latch (Double point) fitted with a single
body, Trim Latch & Lock on back side of the Panic Latch of reputed
brand and manufacture to be approved by the Engineer- in- charge, all
complete.		 each 7134.85
9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/
nails, including a coat of approved primer on one face, and fixed on
wooden /steel frame work, complete as per direction of Engineer-incharge
(Frame work shall be paid for separately).		    
  9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type sqm 1040.80
9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall
thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC
profile, with mitred cut joints and joint with 2 nos of PVC bracket of size
190 mm x 100 mm long arms of cross section size 35 x 15 mm & self
driven self taping screws, the vertical door profiles to be reinforced with
40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM
rubber gasket weather seal throughout the frame, including jointing 5
mm PVC frame strip with PVC solvent cement on the back of the profile.
The door frame to be fixed to the wall using 8 x100 mm long anchor
fasteners complete, all as per manufacturer's specification and direction
of Engineer -in- charge.		 metre  
9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of
single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having
styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of
which 75 mm shall be flat and 20 mm shall be tapered (on both side),
having one side thickness of 15 mm integrally extruded on the hinge side
of the profile for better screw holding power, including reinforcing with MS
tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered
cut & joint with the help of PVC solvent cement, self driven self tapping
screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of
cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece
extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of
which 75 mm to be flat and 20 mm to be tapered at both ends, having 15
mm solid core in middle of rail section integrally extruded, fixing the
styles & rails with the help of solvent and self driven self tapping screws
of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC
extruded sheet inserted in the door as panel, all complete as per
manufacturer's specification and direction of Engineer-in-charge.		    
  9.142.1 Non decorative finish (matt finish) sqm 3240.80
  9.142.2 Decorative finish (wood grained finish) sqm 3842.85
9.143 Providing and Fixing factory made uPVC door frame, made of uPVC
exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm
(± 0.2 mm), corners of the door frame to be mitred cut and jointed with
plastic brackets and stainless steel screws, reinforcing hinge sidevertical of the frames with PVC profile of Size 28 mm x 30 mm having
wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of
125 mm long stainless steel hinges to the frame, fixing the frame with
jamb with required number & size of anchor dash fastners, all complete
as per manufacturer's specification and direction of Engineer-in-charge.		 metre 528.35
9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles
and rails made of PVC hollow section of size 100 mm x 37 mm with
wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles
and rails mitered cut and joint at the corners by means of 2 nos of
plastic brackets of size 75 mm x 220 mm at each corner and stainless
steel screws, reinforcing the hinge side of style by inserting PVC profile
of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail
of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed
to the vertical styles. Providing with PVC snapfit beads and panel of
size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and
fastening with nuts and washers complete, all as per manufacturer's
specification and direction of Engineer-in-charge.		 sqm 3518.85
9.145 Providing and Fixing factory made PVC door frame made of PVC extruded
sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2
mm). Both verticalssides of the frame reinforced with PVC profile of
cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and
75 mm x 200 mm long, including reinforcing both ends of the top frame
with PVC profile. PVC Door Frame and PVC reinforcement profile to be
mitred cut, jointed and fusion welded together, including providing and
fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the
frame with jamb with required nos & sizes of anchor dash fastener, all
complete as per manufacturer's specification and direction of engineerin-
charge.		 metre 588.55
9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles
and rails made of PVC hollow extruded printed and laminated section
having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±
0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut
and joint at corners by inserting 2 nos PVC profile reinforcement of size
75 mm x 200 mm long with cross section size of 28 mm x 30 mm
having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements
to be fusion welded together. Only hinge side vertical style to be
reinforced with PVC profile reinforcement in full length. Printed and
laminated PVC lock rail of size 110 mm x 37 mm having wall thickness
2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after
inserting PVC profile reinforcement as in styles and rails, providing with
PVC snap fit beading, panels of 100 x 20 mm printed & laminated and
inserting 2 nos 6 mm dia bright steel rod horizontally with both side
threaded and tightened with check nuts and washers complete, all as
per manufacturer's specification and direction of engineer-in-charge.		 sqm 3786.45
9.147A Providing and fixing factory made uPVC white colour casement/casement
cum fixed glazed windows comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately)		    
  Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable		    
91.147A. 91 Casement window single panel with S.S. friction hinges (300
x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &
sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm
and single glass pane glazing bead of appropriate dimension.
(Area of window upto 0.75 sqm.)		 sqm 9483.50
9.147A.3 Casement window double panels with top fixed with S.S. friction
hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50
mm, sash 47 x 68 mm & mullion 47 x 68 mm all
having wall thickness of 1.9 ± 0.2 mm and single glazing bead of
appropriate dimension. ( Area of window upto 2.50 sqm).		 sqm 6982.00
9.147A.4 Casement window single panel with S.S. friction hinges (400
x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash
67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm
and single glazing bead / double glazing bead of appropriate
dimension. (Area of window above 0.75 sqm.)		 sqm 9331.00
9.147A.5 Casement window double panels with S.S. friction hinges (350
x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash
/ mullion 67 x 80 mm both having wall thickness of 2.3 ±
0.2 mm and single glazing bead/ double glazing bead of
appropriate dimension. (Area of window above 1.50 sqm).		 sqm 9666.20
9.147A.6 Casement cum fixed panel window having both end single
casement panel, middle fixed panels and at top completely
fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made
of (big series) frame 67 x 60 mm , sash 67 x 80 mm &
mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm
and single glazing bead/double glazing bead of appropriate
dimension. (Area of window above 3.00 sqm upto 5.00 sqm).		 sqm 7242.25
9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/
ventilators comprising of uPVC multi-chambered frame and mullion (where
ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of required
length (shape & size according to uPVC profile), , uPVC extruded glazing
beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8
mm size for fixing frame to finished wall, plastic packers, plastic caps
and necessary stainless steel screws etc. Profile of frame shall be mitred
cut and fusion welded at all corners, mullion (if required) shall be also
fusion welded including drilling of holes for fixing hardware's and drainage
of water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge. (Single / double glass panes and silicon
sealant shall be paid separately).		    
  Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50
mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of appropriate dimension.
(Area upto 0.75 sqm.)		 sqm 6478.75
9.147C Providing and fixing factory made uPVC white colour casement/ Casement
cum fixed glazed door comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, zinc alloy (white powder coated) 3D hinges and one handle on
each side of panels along with zinc plated mild steel multi point locking
having transmission gear, cylinder with keeps and one side key, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall and necessary
stainless steel screws, etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealent shall be paid separately).		    
  Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerance in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147C.1 Casement door with 3D hinges made of (big series) frame 67
x 64 mm & sash 67 x 110 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead
of appropriate dimension. (Area of door upto 2.00 sqm). sqm 9131.45
9.147C.2 Casement door with top hung ventilator with 3D and S.S. friction
hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x
64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having
wall thickness of 2.3 ±. 0.2 mm and single glazing bead /
double glazing bead of appropriate dimension.(Area of door
upto 2.50 sqm)		 sqm 9328.30
9.147D Providing and fixing factory made uPVC white colour sliding glazed window
upto 1.50 m in height dimension comprising of uPVC multi-chambered
frame with in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white
powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm
size for fixing frame to finished wall and necessary stainless steel screws
etc. Profile of frame & sash shall be mitred cut and fusion welded at all
corners, including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes,
wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147D Providing and fixing factory made uPVC white colour sliding glazed window
upto 1.50 m in height dimension comprising of uPVC multi-chambered
frame with in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white
powder coated) touch locks with hook, zinc alloy body with single nylon
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm
size for fixing frame to finished wall and necessary stainless steel screws
etc. Profile of frame & sash shall be mitred cut and fusion welded at all
corners, including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes,
wire mesh and silicon sealent shall be paid separately)
Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147D.1 Two track two panels sliding window made of (small series)
frame 52 x 44 mm &sash 32 x 60 mm both having
wall thickness of 1.9 ± 0.2 mm and single glazing bead of
appropriate dimension. (Area of window upto 1.75 sqm)		 sqm 6709.60
9.147D.2 Three track three panels sliding window with fly proof SS wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(small series) frame 92 x 44 mm & sash 32 x 60 mm
both having wall thickness of 1.9 ± 0.2 mm and single glazing
bead of appropriate dimension (Area of window upto 1.75 sqm).		 sqm 8954.20
9.147D.3 Two track two panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead
of appropriate dimension . (Area of window above 1.75 sqm
upto 2.50 sqm).		 sqm  6912.15
9.147D.4 Three track three panels sliding window with fly proof S.S
wire mesh (Two nos. glazed & one no. wire mesh panels)
made of (big series) frame 116 x 45 mm & sash 46 x 62 mm
both having wall thickness of 2.3 ± 0.2 mm and single glazing
bead / double glazing bead of appropriate dimension. (Area
of window above 1.75 sqm).0		 sqm 8616.00
9.147D.5 Three track three panels sliding window made of (big series)
frame 116 x 45 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window above
1.75 sqm)		 sqm 8177.05
9.147E Providing and fixing factory made uPVC white colour sliding glazed window
above 1.50 m in height dimension comprising of uPVC multi-chambered
frame with in-built roller track and sash extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC
profile), appropriate dimension of uPVC extruded glazing beads, uPVC
extruded interlocks and uPVC extruded Inline sash adaptor (if required),
EPDM gasket, wool pile, zinc alloy (white powder coated) handle on
one side of extreme panel along with zinc plated mild steel multi point
locking having transmission gear with keeps, zinc alloy (white powder
coated) touch lock with hook (if required for wire mesh panel), stainless
steel (SS 304 grade) body with adjustable double nylon rollers (weight
bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary stainless steel screws etc. Profile
of frame & sash shall be mitred cut and fusion welded at all corners,
including drilling of holes for fixing hardware's and drainage of water etc.
After fixing frame the gap between frame and adjacent finished wall
shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes,
wire mesh and silicon sealent shall be paid separately).		    
  Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147E.1 Two track two panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead
of appropriate dimension. (Area of window above 2.50 sqm
upto 4.00 sqm.)		 sqm 6861.60
  9.147E.2 Two track four panels sliding window made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension. (Area of window above
4.00 sqm upto 8.00 sqm).		 sqm 5941.95
9.147F Providing and fixing factory made uPVC white colour sliding glazed door
comprising of uPVC multi-chambered frame with in-built roller track and
sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick
galvanized mild steel section made from roll forming process of required
length (shape & size according to uPVC profile), appropriate dimension
uPVC extruded glazing beads, uPVC extruded interlock and uPVC
extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc
alloy (white powder coated) handle with key on one side of extreme
panels along with zinc plated mild steel multi point locking having
transmission gear with keeps, zinc alloy (white powder coated) cresent
lock (if required), stainless steel (SS 304 grade) body with adjustable
double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners
100 x 8 mm size for fixing frame to finished wall and necessary stainless
steel screws etc. Profile of frame & sash shall be mitred cut and fusion
welded at all corners, including drilling of holes for fixing hardware's and
drainage of water etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather proof silicon sealent
over backer rod of required size and of approved quality, all complete as
per approved drawing & direction of Engineer-in-Charge. (Single / double
glass panes, wire mesh and silicon sealent shall be paid separately).		    
  Note: For uPVC frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable.		    
9.147F.1 Two track two panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead
of appropriate dimension. (Area of door above 2.00 sqm upto
5.00 sqm)		 sqm 6005.00
9.147F.2 Two track four panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead / double glazing bead
of appropriate dimension. (Area of door above 8.00 sqm upto
10.00 sqm).		 sqm 5332.85
9.147F.3 Three track three panels sliding door made of (big series)
frame 116 x 45 mm & sash 46 x 82 mm both having wall
thickness of 2.3 ± 0.2 mm and single glazing bead/ double
glazing bead of appropriate dimension. (Area of door above
5.00 sqm)		 sqm 6064.80
9.147F.4 Three track three panels sliding door with fly proof S.S wire
mesh (Two nos. glazed & one no. wire mesh panels) made of
(big series) frame 116 x 45 mm & sash 46 x 82 mm both
having wall thickness of 2.3 ± 0.2 mm and single glazing
bead / double glazing bead of appropriate dimension. (Area of
door above 2.00 sqm upto 5.00 sqm)		 sqm 7774.55
9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the
side/top hung uPVC windows, of approved quality, with necessary
stainless steel screws etc. as per direction of Engineer-in-charge.		    
  9.148.1 200 x 19 x 1.9 mm each 299.90
  9.148.2 250 x 19 x 1.9 mm each 333.35
  9.148.3 300 x 19 x 1.9 mm each 353.40
  9.148.4 350 x 19 x 1.9 mm each 487.20
  9.148.5 400 x 19 x 1.9 mm each 513.95
9.149 Providing and fixing casement handle made of zinc alloyed (white powder
coated) for uPVC casement window with necessary screws etc.
complete.		 each 187.75
9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for
uPVC sliding window with necessary screws etc. complete.		 each 154.35
9.151 Providing and fixing steel roller for uPVC sliding window with necessary
screws etc. complete.		 each 88.75
9.152 Providing and fixing steel roller for uPVC sliding door with necessary
screws etc. complete.		 each 140.95
9.153 Providing and fixing steel (white power coated) crescent lock for uPVC
sliding window/ door with necessary screws etc. complete.		 each 167.70
9.154 Providing and fixing frame work for partitions/ wall lining etc. made of
50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and
floor in a grid pattern with spacing @ 60 cm centre to centre both ways
(vertically & horizontally) or at required spacing near opening, with
necessary welding at junctions and fixing the frame to wall/ ceiling/
floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including
making provision for opening for doors, windows, electrical conduits,
switch boards etc., including providing with two coats of approved steel
primer etc. complete, all as per direction of Engineer-in-charge.		 kg 124.25
  9.155 Providing and fixing panelling or paneling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows
( area of opening for panel inserts excluding portion inside grooves or
rebated to be measured). Panelling for panelled and glazed shutters
25mm to 40mm thick: Pre-laminated with decorative lamination on both
side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587		 sqm 1624.05
9.156 Providing and fixing Pre -laminated medium density fibre board exterior
grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding
with screws etc. complete ( Frames, backing or studding to be paid
separately).		    
  9.156.1 Pre-laminated with decorative lamination on both side exterior
Grade - I MDF Board 12 mm thick confirming to IS:14587		 sqm 885.15
  9.156.2 Pre-laminated with decorative lamination on both side exterior
Grade - I MDF Board 18 mm thick confirming to IS:14587		 sqm 1080.00
9.157 Providing and fixing Pre-laminated medium density fibre board IS:
14587:1998 marked, with one side decorative lamination other side
balancing lamination Grade-I(exterior grade) in shelves with screws and
fittings wherever required, edges to be sealed with PVC edge bending
tape 2.00 mm thick of approved brand (fittings to be paid separately).		    
  9.157.1 Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade - I MDF Board 18
mm thick confirming to IS:14587		 sqm 1207.60
  9.157.2 Pre-laminated with decorative lamination one side and other
side balancing lamination exterior Grade - I MDF Board 25
mm thick confirming to IS:14587		 sqm  1626.05
9.158 Providing and fixing in wall lining medium density fibre board IS:
14587:1998 marked, Pre-laminated one side decorative lamination and
other side balancing lamination, with necessary fixing arrangement and
screws etc. complete.		    
  9.158.1 12 mm thick. sqm 1050.65
  9.158.2 18 mm thick. sqm 1249.35
  9.158.3 25 mm thick. sqm 1683.50
9.159 Providing and fixing 25mm thick pre-laminated medium density fibre
board exterior grade ( Grade-I) IS:14587:1998 marked with one side
decorative and other side balancing lamination for cupboard shutters
edges to be sealed with PVC edge bending tape 2.00 mm thick of
approved brand including ISI marked nickel plated bright finishing M.S.piano hinges conforming to IS:3818 marked with necessary screw etc
all complete.		 sqm 1816.75
9.160 Providing and fixing skirting with Pre-laminated medium density fibre
board exterior grade (Grade-I) conforming to IS: 14587:1998 marked,
with (one side decorative and other side balancing lamination and edges
to be sealed with PVC edge bending tape 2.00 mm thick of approved
brand with necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. all complete.		    
  9.160.1 18 mm thick. sqm 1843.15
  9.160.2 25 mm thick. sqm 2277.30
9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate
made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/
m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.
The frame shall be filled with Mineral wool Insulation having density min
96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos
( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )
suitable for fixing in the opening along with Factory made Template for
SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated
glazed shutter . The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in desired shade
as per the directions of Engineer - in- charge . (Cost of SS ball bearing
hinges is excluded).		 metre 1512.95
9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of
120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,
tested and certified as per laboratory approved by Engineer-in-charge,
with suitable mounting on door frame, consisting of vertical styles, top
rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60
mm made out of 1.6mm thick G.I. sheet (zinc coating not less than
120gm/m²) duly filled mineral wool insulation having density min 96 kg/
m³ and fixing with necessary stainless steel ball bearing hinges of size
100x89x3mm of approved make, including applying a coat of approved
fire resistant primer or powder coating not less than 30 micron etc all
complete as per direction of Engineer-in-charge (panelling to be paid for
seperately).		 sqm 8379.30
9.163 Providing and fixing non load bearing fixed frame for fire resistant glazed
Partition for 120 minutes Fire Rating, made out to a profile of dimension
60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test
evidence suitable for fixing fire rated glass for 120 minutes of both integrity
& radiation control (EW120) & minimum 20 minutes of insulation
(EI20).The profile has to be fixed to the supporting construction by means
of anchor fasteners of size M10 x 80, every 150 mm from the edges and
every 500 mm (approx) c/c. Linear measurement of frame shall be
measured for payment. The frame shall be filled with mineral wool
insulation of density min 96kg/ m³ and finished with a approved fire
resistant primer or Powder coating of not less than 30 micron in desired
shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of Engineer
- in- charge.		 metre 1512.95
9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet
(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed
with M4 x 38 mm SS screws at distance 75 mm from the edges and
150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special
ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC
2016, IS 16231 (Part 3):2016 and as per direction of Engineer-incharge
with glass of required thickness having 120 minutes of fire
resistance both integrity & radiation control (EW120) and minimum 20
minutes of insulation (EI20). The manufacturer have to give test
report/certification of fire glass and the glass should have the
stamp showing the value of E, EW & EI. The glass shall be tested
in approved NABL accredited lab or by any other accreditation
body which operates in accordance with ISO/IEC 17011 and
accredits labs as per ISO/IEC 17025 for testing and calibration
scopes shall be eligible. The maximum glazing size shall not be
more than 1100x2200 mm (w x h) or 2.42 sqm.		 sqm 39395.30
9.165 Providing and fixing bright /matt finished Stainless Steel handles of
approved quality & make with necessary screws etc all complete.		    
  9.165.1 125 mm each 98.75
  9.165.2 100mm each 74.00
  9.165.3 75 mm each 47.20

****